Hula Hoop Tent Tutorial
Just something about a covered play space inspires a child’s creativity and opens the door to their imagination. In addition to tents and canopies, you can also build forts out of sheets and rope, which are all inexpensive to build and make for great hideouts. However, if you’re looking for something a little more formal to display in your house, this canopy-style tent could be the perfect choice! When I saw this play home at CrateKids, I fell in love with it. However, I wanted to construct a smaller version in a more traditional color scheme so that it could hang in our living room without being too obvious.
If you want to go bigger, you can use any fabric and color combination that you like to make this project.
Materials: -drapes fabric (for the drapes) (6 yards for a large hula hoop, 4 yards for a small one) It’s estimated that I used 2 yards of cloth for the tent’s top (but I used spare fabric and am not sure how many yards I really used.) -hula hoop-velcro closure (heavy duty, non-adhesive type) Hang your tent from the ceiling using the hook provided (I used one ofthese banana hooksI had on hand.) -straight pins are used.
-a pair of fabric scissors -fabric pencil (optional) (regular pencil will do) – border template (optional) -sewing machine (optional) Cost: The cost may vary based on the size of the hula hoop you use and the cloth you choose.
- First and foremost, you must understand what you are doing.
- A center seam will be required to join two of these parts together to form a smaller hula hoop.
- Check to see that the pattern matches up at the sewing seam.
- Repeat this process for the other side.
- They should be 8 inches broad, with a length equal to your hula hoop’s diameter plus one inch for hem allowance, and they should be 8 inches wide.
- Using the border pattern you printed and cut out in step two, trace it onto the length of cloth you cut out in the previous step.
- The circumference of hula hoop rings varies, therefore I am unable to predict how many repeats of this pattern will fit down your fabric strip.
Place the two pieces of cloth together and cut out the zigzag pattern that you just sketched in the previous step.
Sew the two ends together to form a large circular shape.
Make both strips the exact same diameter as the first.
Sew along the pinned zigzagged edges, about 1/4 inch from the edge of the cloth, to complete step seven.
Step Nine: This will assist your cloth in laying more flat and avoid puckering throughout the following stage.
To get the peaks to stick out to their best capacity before ironing, you may need to use a pointed item.
When the sections are connected to the rest of the tent later, this procedure will prevent them from moving apart when they are connected.
The length of this is determined by the height of your ceiling as well as the length of the hook you choose to hang it from.
As you can see in the photo above, I started with a piece of cloth that was about 24 inches long and 2 inches broad.
The use of a safety pin will allow you to turn the tube right-side out.
Step Thirteen: After the tiny tube of cloth has been turned right-side out, iron it flat.
The size of your triangle is determined by the specifications of your hula hoop.
For symmetry purposes, I folded a triangle in half before cutting out the curve, and then I used that triangle as a template for the remainder of it.
Then repeat the process with the remaining four triangles.
Make careful to attach the tent hanger that you created in steps 11-13 before joining the two pieces together at the joints.
Step Sixteen: Using the hanging strip that was tucked snugly inside the tent top in step fifteen, pin the two parts of the tent top together as shown above.
Eighteenth Step:Place the hula hoop over the finished tent top and trim the edges to form a circle that is approximately 1 inch wider in diameter than the size of the finished tent top.
To do this, you must first collect the drapery fabric.
As I put them together, I was able to relax the gather to the precise circle of the zigzag border, which was a perfect fit.
Now that the draperies and border are joined, you may proceed to attach the tent top to the frame.
Then, using a sewing machine, sew them together to complete the project.
If this occurs, simply pin the border a little more inside the perimeter of the tent top, while remaining faithful to the circle of the tent top.
Check to see that they are pointing in the right direction, as indicated in the above illustration.
I sewed two velcro pieces onto the base of each triangle to ensure that there was plenty of reinforcement.
I opted to cover my hula hoop in white tape so that it would be less obvious from the inside of the tent, which you may have seen.
You may use any hook you choose, but I used a banana hook since it was something I had on hand and because it is long, it provided me with some additional length to allow the curtains to pool a little on the ground.
Due to the fact that my triangles were not quite long enough (I hadn’t figured out the math that I shared with you yet—I had been winging it), my tent top was only just big enough to reach around the perimeter of the hula hoop.
Perhaps yours will be a perfect fit if you follow the method exactly and cut your tent top to be slightly bigger in circumference than the hula hoop at step 17.
When making your tent top, remember to make it slightly larger than you need it.
Oops!
When it was simply a notion in my head, it appeared to be complex.
Yes, it is a little time consuming. However, if you are experienced with pattern sewing in any way, it will be really simple for you to create as well! Mandi Johnson is the author and photographer of this piece. Stella worked with photos from the Signature Collection to edit them.
How to Make a Hula Hoop Tent
Documentation Download Documentation Download Documentation For those of you with a DIY spirit and children who would benefit from a small enclosed space for playtime or reading, there is no need to rush out and purchase a tent right away. Making your own, even if you aren’t a master sewer, is simple and inexpensive. You can make one out of a bedsheet or a shower curtain, and then add a few finishing touches to make your tent look even more attractive after you’ve finished.
- 1Put your hoop on top of the sheet and secure it with tape. Prepare a king-sized sheet by spreading it out and straightening it so that the patterned side is facing down. Afterwards, align your hoop along one of the sheet’s biggest edges on the sheet’s underside (the side that is facing up). 2 Place the hoop along the edge of the cloth with approximately three inches (7.6 cm) of fabric between the two
- Fold the cloth over the hoop and secure it in place using masking tape. Three inches of fabric should be folded over the nearest end of the hoop, so that the patterned side of the cloth is now facing up. Remove a strip of duct tape from the package. Use masking tape to secure the sheet’s edge to its underside, within the hoop, forming a loop that wraps around the hoop. Advertisement
- s3 The sheet’s two corners should be secured. To begin, choose any corner of the same edge from which to start. Pull it over the hoop until it is on the other side of the hoop from where you taped it in the middle. Feed about three inches of the corner of the sheet through the hoop and align it with the other edge of the sheet. Join the two together with a piece of tape then use another length of tape to form a second loop. After that, repeat the same with the opposite corner
- 4 Work your way back to the center of the circle. At this stage, it may be more convenient to place the hoop on two sawhorses (or something similar) so that you may kneel or stand in the centre of the hoop. Continue dragging approximately three inches of fabric over the top of the hoop, taping its edge to the sheet’s underside, starting at either corner and continuing until you reach the location where you put your initial piece of tape. 5Repeat the process on the opposite side until you have a continuous loop around the entire hoop
- 5cut holes in the tape and the sheet of paper. Consider your hoop to be a compass, with poles pointing north, south, east, and west (with the open flaps of your tent serving as one of those poles). Poke holes in the duct tape and sheet with a small knife, scissors, or something similar at the ends of each pole. Just large enough for you to be able to thread your string through each one. Make a minimum of five holes (one through each flap of your tent’s entrance) to ensure that the weight is distributed properly when the tent is hanging. 6 Tie the hoop and binder ring together with equal lengths of twine. Make five equal pieces of thread, one for each hole, and tie them together. Exactly how long they are doesn’t really important, so long as they are long enough to reach the binder ring when they’re placed in the middle of the hoops and suspended from the ceiling. Each length is tied to the ring with one end
- The other end is threaded through a hole and tied around the hoop with the other end
- It is possible for twine to unravel with time
- However, you may avoid this by wrapping each end with duct tape.
- 7 One extra length of twine will be needed to hang your tent. Install a hook into the ceiling of your home. Cut a second length of twine and attach one end of it to the hook as before. There’s no need to worry about the exact length of the tarp as long as it’s short enough to prevent the tent’s bottom from bunching up on the ground. Tie the other end of the length to the book ring, and your tent is ready to use.
- There is no need for a hook if you plan to hang it outside. To finish, just knot one end of your final strand of twine around a tree limb or other comparable item.
- 1Make holes in the hoop with a drill. Make sure to choose a drill bit that is large enough to accommodate your nylon rope. Drill four holes at evenly spaced intervals along the length of your hoop. Consider it in terms of a compass, with one hole at each of the four points: north, south, east, and west. Make a single binder ring and thread it through all of your curtain holes. The larger the binder ring, the less difficult it will be to do this task. To begin, start at one end of your first shower curtain and thread the ring through the curtain’s initial opening. Bundle the curtain together and thread the second hole through the ring. Follow the steps above until all of the holes have been hooked, then start again with the second curtain. When you’re finished, snap the ring shut.
- Because this is a difficult task, if you require more than two hands to maintain the curtains bunched up as you work, ask for assistance.
- 3 Equal lengths of rope should be threaded through the perforations. Cut four equal lengths of nylon rope, one for each hole in your hoop that has been drilled. Each one should be threaded through the hole. Once you’ve pulled half of the length through, stop.
- It makes no difference what the exact length is. It’s just important that they are short enough to prevent the shower curtains from bunching up on the floor when your tent is set up.
- 4Put your drapes over the hoop to block off the light. To begin, gather all of the free ends of your nylon rope together in a ball. Then, from behind the bunched drapes, thread them through the binder ringer to secure them. The loose ends of the rope should be pulled taut and twisted together to form one large rope once they have passed through the binder. To tie a knot, leave enough rope above the knot to allow your tent to be hung from a ceiling hook. Tents should be hung from the ceiling. Install a hook in the ceiling of your home. Twist the loose ends of the rope back together into one large rope and tie it into a second knot as close to the end of the rope as you possibly can. Make a second binder ring by threading it through the rope beneath the first one. Finish by closing the ring and looping it over the ceiling hook. Advertisement
- 1Place bunting along the length of the hoop. Select the fabric of your choosing to complement the color(s), patterns, and/or textures of your tent’s inside. Cut it into triangles, or any other form that appeals to your sense of design. Attach velcro strips to the backs of these to hold them together. Attach the equivalent strips down the length of your tent, over the hula hoop, as shown. Then, to join your bunting, just press the two strips of fabric together. 2Construct seals. Make it possible for yourself to close the flap of your tent. Attach sticky velcro strips around the inner edge of one flap, with the adhesive side facing in. Then, for each strip that was utilized, connect a comparable strip to the inside of the flaps of your second bag. Pinch the strips together to prevent the flaps from whipping apart when you want to be completely isolated from the rest of the world
- 3Install lights. Line the interior and/or outside of your tent with strands or strips of ornamental lights, secured with adhesive strips or tape, to create a hoop effect (like Christmas, star, or fairy lights). Make certain, though, that you are using LED lights. Avoid using other types of bulbs, such as incandescent ones, because they release far more heat and represent a fire hazard. Advertisement
Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement Thank you for submitting a suggestion for consideration!
Things You’ll Need
- 2 hoops
- 1 bedsheet (king size)
- Twine
- 1 book ring
- Duct tape
- A small knife or pair of scissors
- The following items are required: 1 hula hoop
- Nylon rope
- 1 shower curtain
- 2 big binder rings
- Power drill.
About This Article
Thank you to all writers for contributing to this page, which has been viewed 18,032 times so far.
Did this article help you?
A place for the kids or even for yourself to unwind and enjoy some reading or napping doesn’t have to be difficult or expensive to create. This simple DIY Hula Hoop Tent requires only a few common household items, some of which you may already have on hand, as well as less than 30 minutes of your time. With the help of a Hula Hoop and an extra large sheet, you can create an outside tent that can also be used as a bedroom or playroom for your children. Let’s get our supplies together.
DIY Hula Hoop Tent Supplies
- Hula hoop – spotted alongside the bicycles at Walmart for about $3, they are also available online. To ensure we had plenty of cloth, we used a King-size sheet. Twine — may be obtained in the Hardware Department at Walmart for less than $3 per yard
- Book Rings may be purchased in the Office Supplies section of the store. Duck tape may be bought in the Hardware section of the store. scissors and Scotch Tape are not seen in this picture
Step 1: Lay down the sheet and fold it over the hula hoop by 2-3 inches, securing it with Duck Tape to keep it in place. If you like, you may sew it on with a needle and thread if you choose. Step 2Make your way around the hoop as you go. We chose the long side of the sheet so that there would be plenty of excess fabric to collect when we were through. Step 3Poke a hole between the Duck Tape and the sheet with a small, sharp pair of scissors, creating a location to thread the string through. Measure 52 inches of twine and thread it through the ring, fastening the string to the ring through the hole you cut with the scissors in Step 4.
Secure the hoop on both ends by tying a knot in each end.
A blanket to cover the ground, a pillow, and some nice books will transform your backyard into a delightful little hideaway where you can relax and read for yourself or the kids.
Make a DIY No-Sew Kids’ Play Canopy Tent. in an hour!
A hula hoop, two shower curtains, and an electric drill are all I need! I screamed, unleashing my inner MacGyver to get my point across. Our DIY Kids’ Canopy Play Tent was completed in less than an hour, and my children were ecstatic with it. This isn’t some amazing demonstration of super DIY prowess; the fact is that I’ll do everything to avoid sewing or spending a lot of time (and money) on a DIY project in the first place. While constructing the play canopy is simple, your children will adore the finished product, and you will feel like a superhero for completing it in such a short period of time– and for far less money than retail.
- I’d been planning how to create a play tent in my brain for years but had never taken the plunge and really tried it, mostly because I sew like a drunken sailor.
- My kid was going through the Land of Nod catalog last week and begged for one of their magnificent canopy type play tents, so I decided to try my hand at making a DIY version instead.
- For once, I’m pleased to say that it was successful the first time I attempted it.
- After reading the bookSimplicity Parenting, which changed my life, I’m making the transition to simpler toys.
- DIY versions may be used as a reading nook, dream space, camping area, ice cream truck, carnival tent, rocket ship, or whatever else the kids wish it to be at that particular time of year.
- I’ll take ‘innovative playthings for 100, Alex,’ and choose for the unadorned version of the toy set.
- This was so simple to construct that I can’t believe it really worked!
- The rugby striped shower curtain from Target (and I have to say, they had a ton of amazing designs) was my favorite, but you could use ANY shower curtain you wanted, from any retailer, at any price range.
Before you begin, you’ll need the following materials: 2 shower curtains are utilized as materials (I usedthis Rugby Stripe shower curtain) a binder ring that is far larger than normal (OR useTarget ring shower hooksas I did below) the hula hoop (I used a smaller size for this project) braided nylon rope (I usedSecureLine Diamond Braid Nylon rope, 40 ft.
feltvelcro is a kind of Velcro that is feel (if making the bunting) illuminations enchanted (optional) heavy-duty ceiling hooks with anchors for securing large items (check the weight limit on the ceiling hooks) drillscissors Directions: STEP ONE: First, drill four holes in the hula hoop with a little drill bit.
- STEP TWO: Gather the shower curtains together with a single shower ring (or binder ring).
- Despite the fact that it is a tight fit, it works!
- THE THIRD STEP: Cut four lengths of nylon rope and thread them through the hula hoop’s holes to secure them.
- Because ceiling heights and curtain lengths vary, I am unable to provide specific measurements.
- FINAL STEPPING POINT: Pull the rope through the top ring in the center of the gathered shower curtains, gathering all eight ends of the rope in the process.
- THE FIFTH STEP: Install the ceiling hook in the desired location.
- My 7-year-old snapped this picture with my DSLR camera as I was installing the hook, and I couldn’t believe I was posting it on the internet until I looked at it again.
Now this girl comes along and hits it right away.
Yoga pants, on the other hand, are not my buddy.
I made another knot at the very top of the ropes and then used a shower curtain ring to attach it to the hook at the very bottom of the ladder.
Because the shower curtain ring is only capable of supporting a small amount of weight, this may not be the most effective option.
That’s the one to go with.
STEP SEVEN: Putting the finishing touches on it!
Then you may start working on the flag bunting.
If you don’t want to sew, you may connect the flags to the tent instead of sewing them together with velcro instead of sewing them together.
Velcro dots were used to adhere them to the tent after that.
STEP EIGHT: My children enjoy the fact that there are two ‘doorways’ (since there are two shower curtains), but if you just want one access point, use velcro to attach the rear seams together instead.
We didn’t go overboard with the details, so this job was completed in under an hour!
It looks very stunning both inside the tent and at night.
I believe she does as well.
this morning, I could hear them laughing as they pretended to be at “camp,” filling the tent with books and torches and other “camping” supplies.
My children believe that this no-sew kids’ canopy play tent, which costs $130 less than the catalog version, is a winner because it is so inexpensive.
If only I’d summoned my inner MacGyver and created it years ago, when I initially had the idea in my head. THERE HAS BEEN A LOT OF WASTE OF TIME. Now, where have all of my duct tape, tennis racquet, and rubber bands disappeared to? I’m building a swingset from scratch!
DIY Hula Hoop Canopy
Design tasks, home improvement projects, and crafts for the home The 28th of July, 2015 In addition to being visually interesting, hula hoop canopies are also inexpensive, making them an excellent choice for any location. Check outBefore and After: Bedroom on a Budget to see the video in which this DIY was featured! Preparation:
- The following items are required: hula hoop, rod pocket curtain panels, white spray paint, twine, bolt cutters (if your hula hoop does not come apart like mine did)
- Strong tape, such as duct tape (if your hula hoop does not fall apart)
- Screw hook and anchor to attach canopy to ceiling
- Strong tape, such as duct tape
- Even if your hula hoop does not break apart at the light attachments, you may still cut the hula hoop to allow you to slip the rod pocket curtain panels into place afterwards. The following are some pointers: If your bed is a queen or king size, you may choose to leave the hula hoop at its original size
- But, if you have a full or twin bed, it will look better if you reduce the size of your hoops to a smaller ring (like I did)
- The hula hoop should be painted using spray paint. Allow to dry
- Re-attach the curtain panels to the hoop with strong tape once they have been threaded through it. Tie the twine around the hoop in between the panels to secure the hoop to the ceiling, or punch holes in the curtain panels to feed the string through to secure the canopy to the ceiling. Tie the twine around the hoop in between the panels to secure the hoop to the ceiling. It will be more sturdy if you tie three pieces of twine together in a teepee form and run them up to the hook on the ceiling. Allowing the curtain panels to hang down on the sides or behind your bed can provide the desired effect.
Related
Design projects, design inspiration/tips, and interior design DIY interiors crafts, home design projects, inspiration/design ideas, and more on November 20, 2020. Thursday, September 4, 2020home design projects The 16th of May, 2020
A Dreamy Canopy Tent
It should be noted that this content may contain affiliate links. This means that if you decide to purchase something after clicking on a link we provide, we may gain a small commission (including links to amazon.com because we are a participant in the Amazon Services LLC Associates Program.) Don’t be concerned, you will not be charged anything. Ladies, I’ve got a cute little project for you to work on! In my home, we are always constructing little tents. There is nothing my children like more than draping a few blankets over the table, or tying some thread and hanging a sheet over it.
I felt it was past time for me to make them a nice tent that would be simple to set up and take down with just a little assistance from mother and daddy.
Moreover, it will probably just take you around 10 minutes to whip it up!
My entire family has already fallen in love with it!
Make Your Own Dreamy Canopy Tent
three bundles of low-cost curtains 1 spool of ribbon (about) (you may need 2 if you want to hang it longer) 1 enormous embroidery hoop
The supplies details:
As an example, I chose an off-white ribbon that was 1 1/2 inches wide and 12 feet long for my own project. A local craft store had it, so I bought it there. If you want to hang your lovely canopy tent a bit lower than I did, you may want to purchase two spools of thread instead of one, since I needed one full spool for mine. In addition, I purchased an embroidery hoop from a nearby craft shop. I believe it is the perfect size for me; it is 23 inches in diameter. Ikea LILLwhite curtains served as the backdrop for my photoshoot.
- They are ideal for this job in every way.
- You may also try searching on eBay or Amazon to see if they are available there.
- The dimensions of these drapes are 110 inches wide by 98 inches high.
- does that make sense?
- Let’s get this party started!
How to Assemble Your Dreamy Canopy Tent
Completely disassemble the hoop component and store the hardware bits somewhere you won’t lose them! A tiny plastic bag may be slipped over the end of an open hoop (with the open end positioned in the center of the bag so that its corners cling to the cloth) and then twisted around an open hoop’s arm arm. As you begin to slide the curtain fabric onto the hoop, the plastic will assist you in a smoother transition. Make sure that the casing seam, which runs along the top of the curtains, is towards the inside of the hoop while installing the curtains.
- Take the hardware that you took from the hoop at the start of this process and put the hoop together once again.
- Make certain that the curtains are equally spaced around the hoop before hanging them.
- However, if you want your hoop to dangle more from the ceiling than I did, you may make your ribbon a little longer.
- You will place one ribbon per two curtain panels, which will ensure that the curtains are evenly spaced on both sides.
- Tie them together in a knot like this.
- Request that your handyman install a hook from the ceiling in a safe location.
- Then, with two curtain panels stretched apart, you have a door!
- Watching them perform is like to being in a state of pure bliss!
It’s perfectly OK to toss them in a bag or keep them like way! Simple, enjoyable, and very stunning! I hope you and your children had a good time!
No-Sew Hula Hoop Canopy With Pom Poms
Tents, tee pees, forts, and secret hideaways have always had a special place in my heart. In addition, there is something particularly romantic about a gorgeous canopy that drapes over a bed. This variation, which is made with a hula hoop and some sheer curtain panels, is really simple to put together. For a particular finishing touch, I added a whimsical pom pom accent to mine. Make an experiment out of it, and sleep peacefully under your lovely canopy. We want to make it as easy as possible for you to do it yourself, so we’ve included links to vendors for some of the materials in this post.
- Step 1: Take your Hula Hoop and cut it.
- Step 2: Decorate your hula hoop with paint.
- Step 3: Apply glue to the trim.
- They will only be applied to one side of the panel, so you’ll need two different strands that are the same length as the panel to complete the task.
- Afterwards, apply it to the edge of the other panel.
- Thread the first panel through the hoop with the trim applied first, making sure the trim leads when the panel is placed on the hoop.
- Last but not least, thread the final panel onto the hoop so that the trim is facing outward.
Close the opening of your hoop with a piece of heavy-duty packaging tape.
Step 6: Cut the string that you’ve made.
Step 7: Secure the string with a knot.
The overall balance of your canopy will be determined by the strings that will be used to suspend it from the ceiling.
Make a meeting point in the center of the hoop with the long segments of all four threads.
Install the ceiling hook in the ninth step.
Make sure to check the weight limitations before you travel!
Once you’ve secured the canopy string to the ceiling hook, equally spread out the curtain panels and create a “opening” between the two panels by trimming the ends of the curtain panels with the trim.
Your own personal getaway is now available for you to enjoy! Isn’t it just a lovely addition to my daughter’s room?
How To Make A Hula Hoop Tent
Cut the rope into four 6′ lengths (or whatever length you believe you’ll need to attach to a tree branch) and knot them together with twine. Attach each component to the hula hoop with packing tape to hold it in place. Suspend yourself from a branch. Decorate the interior with blankets and pillows for a more comfortable hideaway. 23rd of July, 2015
How do you hang a hula hoop tent?
Tents should be hung from the ceiling. Install a hook in the ceiling of your home. Twist the loose ends of the rope back together into one large rope and tie it into a second knot as close to the end of the rope as you possibly can. Make a second binder ring by threading it through the rope beneath the first one. Finish by closing the ring and looping it over the ceiling hook.
How easy is it to make a tent at home?
15 Different Ways to Make a Tent (DIY tents) So let’s get this party started: Make a canopy bed using an embroidery hoop and cloth using this easy DIY project. Make a no-sew tepee out of bamboo and thread to keep warm in the winter. Make a reading nook in the kids’ room for them. Making an outdoor playhouse for the summer, courtesy of a children’s activities site. Make a play tent out of a clothesline. This toy tent is constructed from dowels.
How do you make a play tent?
Tent for Children Made at Home Here’s an example of an A-frame A no-sew cover is included with this DIY play tent. The structure is constructed out of wood boards and dowels, while the cover is constructed out of a twin-size sheet and a few hook and loop fasteners, among other materials. Upon completion, you’ll have a super-cute tent that the kids will really adore.
How do you make a tent without sticks?
Set up your tent by tying one end of your rope around a tree, far enough away from the trunk so that when it is hanging loose, it reaches the middle of the location you have in mind for your tent. In case the tree is too high to reach or shimmy up to knot one end, toss the rope over the tree and work with the double length instead! 2.
What is a canopy over a bed called?
An overhanging canopy, generally made of carved or cloth-draped wood, that covers a bed, grave, pulpit seat, or other structure. It has been around since the 14th century and is generally fashioned of the same material as the thing it is intended to cover.
How do you make a homemade tent blanket?
Make the fort more comfy by laying down blankets and cushions on the floor of the fort. Fold a comforter in half and put it down, or pile a couple blankets on top of one another to provide additional padding for the base of the fort. In the following step, arrange many cushions or pillows around the perimeter of the fort.
How do you hang a canopy over a bed?
Installing a Bed Canopy: Step by Step Instructions Select a Canopy from the options. There are many different colors and materials available for canopy construction, ranging from airy and lightweight to thick and luxurious textiles. Specify your preferred location. The sort of canopy you choose will influence where you hang your canopy in respect to the location of your bed. Install the Hook at the appropriate location. Attach the Canopy to the frame. Add a Little Flavor.
How do you put curtains on a canopy bed?
Using hooks and wire, you may hang canopy bed curtains without the use of rods (or rope) Each canopy bed pillar should be marked so that you know where to attach hooks.
Drill holes in the bed posts and screw on eye hooks. Make a decision on the size of the canopy bed drape panel panels. Install a rope or wire between the hooks to keep them from falling out. The canopy bed drapes should be hung from the wire / rope.
How do you hang a bed canopy without a drill?
Fix the embroidery hoop to the table with two long ribbons or lengths of string, one on each side. To hang the canopy, tie the ends of the ribbons together and attach them to the self-adhesive hook. If the grip does not appear to be strong enough, put a little amount of Sticky Tack on the sticky portion of the hook to give it some more holding strength.
How do you make a tent out of 4 chairs?
A simple DIY Tent that you can create at home with your children! Determine the location where you would want to put up your tent. Gather all of the items that you will require at the same time. Place four seats on either side of the table, two on each side of the table. Incorporate many different colors into the tent’s backdrop by employing a variety of different textile pieces. Everything is almost finished with the tent, and now it is time to be creative!
How do you make a tulle canopy?
How to Make a Tulle Canopy Tent (with Pictures) STEP 1: CUTTING THE TULLE The first step is to determine the height (or length) of the canopy you wish to build. STEP 2: SEW THE PANELS TOGETHER. STEP 3: APPLY PAINT TO THE EMBROIDERY HOOP. STEP 4: STITCH TULLE PANELS TOGETHER. STEP 5: FINISH BY ADDING ROPES AND A RING. STEP 6: HANG THE CANOPY ON THE STREET.
What household items can you make a fort out of?
Instructions for Making a Tulle Canopy Tent CUTTING THE TULLE AS FIRST STEP In order to build your canopy, you must first choose its height (or length). SEW THE PANELS TOGETHER IN STEP 2. EMBROIDERY HOOP CAN BE PAINTED IN STEP 3. STEP 4: STITCH TULLE PANELS TOGETHER WITH TEXTURED FABRIC. INSTRUCTIONS: STEP 5: INCLUDE ROPES AND A RING WHEN YOU’RE DONE WITH STEP 6, HANG YOUR CANOPY.
How can I hang curtains from the ceiling without drilling holes?
Follow these easy instructions if you want to hang curtains from the ceiling without having to drill any holes. Get your stuff together. Measure and note the location of the hook. Remove any texture from the ceiling using a scraper. Hooks with sticky backing should be used. Curtains should be threaded onto the rod. Suspend the rod from the ceiling.
How do you make a tent at home in bed?
Make a simple tent by tying a string between two sturdy points and stretching it. A sheet draped over it in an a-frame shape can be used to create a simple, quick-to-assemble tent. Add some pillows to the bottom of the bed and you’re good to go. Another option is to run a dowel under the fabric and then attach strings to the end of the dowel to hang it from the ceiling.
Can you add a canopy to a bed?
If you have a structural canopy bed, the simplest approach to construct a basic canopy for your bed is to drape a piece of cloth over the top frame rails of the bed. However, if your bed does not have a canopy frame, there are alternative options for creating the appearance of a canopy while also surrounding your bed with softness and color.
How do you make a 4 poster bed canopy?
When it comes to converting a four poster bed into a canopy bed, four poster beds are the most straightforward. To convert a four-poster bed into a canopy bed, attach hooks and wire or bars made of wood or metal to the bedposts and suspend the canopy from the bedposts. Once you’ve finished, just drape or hang curtains over the canopy structure you’ve made.
DIY Play Tent
Christina from 2 Little Hooligans has generously shared her Play Tent Tutorial with us. Thank you, Christina! Remember to check out her blog to see what other projects she’s been working on. ******** If you are able to find some spare time, I hope you will make one for the kids. Ours will be hung out by the garden, which is where it will be located. How to make a play tent for two small hooligans (This is a beginner project, and it should take around 2-3 hours from start to completion). The following materials are required: *3 twin flat sheets, with two of the sheets having the same design as the other.
Set your stitch length to 1, and be sure to zig-zag or serge over all of the raw edges to finish the project.
I used my bias tape machine to create the ties for my outfit.
Make a total of 6 triangles.
Make a trace and cut it out.
Sew two triangles together on one side with the right sides facing each other.
The triangles should be stitched together in the manner shown above.
Make a loop at one end of the 30′′ by 1′′ broad tie by sewing it together.
Because my linens arrived in these adorable tiny bags, I couldn’t resist putting them to use.
These are located on the exterior of the tent.
You have successfully completed your sewing project!
Then turn the tent inside out and secure the hoop to the tent using the little ties.
Locate a suitable location to attach or anchor the tent to.
You are welcome to link to this from your blog and to use any of the photos provided you are courteous and provide credit where credit is due.
Best of luck with your stitching!
A complete RSS feed will no longer be permitted due to the large volume of information that is being utilized without permission and without proper attribution.
I respect each and every one of my readers, and I hope you will take the time to click through and come see me! XOXODianawww.thegirlcreative.com
