Which Side Of Tent Footprint Goes Up

Which Side of A Tent Footprint Goes Up?

Because it is such a straightforward piece of equipment, there are no written instructions. When it comes to setting up your tent footprint, is there a correct way and a wrong way? Which side of a Tent Footprint is the upward facing side? Which side of a tent’s footprint should be raised? According to technical specifications, the waterproof side of your tent footprint should be facing upwards towards the sky.This is generally the glossy side that has the brand logo on it.Honestly, I don’t believe it makes a difference which side is up.Does it really make a difference?

Continue reading for additional information on how to set up your tent footprint correctly.

Which Side Of a Tent Footprint Goes Up?

Tent Footprints are meant to keep your tent protected from the elements while you’re camping. When the ground isn’t perfectly flat, a tent footprint or ground fabric will help to keep your tent floor from ripping and tearing. So, what is the best way to make use of a tent footprint?

The Shiny Decorative Side Goes Up

It actually doesn’t matter which side of the Tent Footprint is used to construct the structure. The majority of manufacturers recommend that you place the glossy side with the logo facing up. According to the manufacturer, the glossy side has a waterproofing coating, but I don’t believe this (it’s probably simply so people can see the logo). When you consider the appropriate method to use a tent footprint, it doesn’t make any sense. After you’ve set up the tent, you shouldn’t be able to see the footprint any longer.

Its sole purpose is to keep muck and unintentional punctures at bay.

Setting Up Your Tent Footprint

All of the other steps in the setup process are fairly straightforward as well.

  1. First and foremost, you must prepare the area where you will be camping by placing your footprint or groundsheet. In most cases, unless your tent is quite costly, you will not require a particular footprint. (I’ve been using this inexpensive footprint.) Any inexpensive blue tarp will suffice
  2. Determine which side of the tarp/footprint is waterproof by looking at it closely. The shiny side of the ground fabric is normally facing up towards the sky
  3. Begin erecting your tent on top of the ground cloth. Incorporate your tent poles into the grommets, then secure them with the straps for further stability. It will just take a few minutes to put up your tent and call it a day if you have a tarp.

Advantages to Buying a Real Tent Footprint

The great majority of my life, I have avoided leaving a physical footprint in favor of utilizing a tarp instead of paper. That was all I actually required on those brief camping trips over the weekend that I took. It wasn’t until I started working with lightweight equipment that I realized the importance of specialized footprints for me. It is possible to eliminate the need for the tent body and simply utilize the rainfly and footprint when you have a footprint created particularly for your tent.

You may certainly use a tarp as a tent footprint, but it will not be the most effective solution.

Does that seem like something you’d want to tuck away in your bag somewhere?

Is a Footprint Really Necessary?

Unless you’re spending a lot of money on camping equipment, leaving a footprint isn’t really necessary. Tents that cost $20-$30 are supposed to be thrown away, so leaving an imprint isn’t going to help problems.

When dealing with pricey equipment, it’s likely that you’ll want to leave a trace. The only time you’ll absolutely want a footprint is on sandy or gravelly terrain. Sand and gravel will soon erode the surface of your tent’s groundsheet.

How to Use a Tent Footprint (The Right Way)

An appropriate tent footprint may be a fantastic method to provide additional protection for your tent when it is used properly. These ground coverings are lightweight and simple to apply, and they protect your tent from sharp items as well as damp ground and moisture build-up. As a result, let us examine how to utilize a tent footprint correctly, which type to select, and whether or not you actually require one.

Should You Use a Tent Footprint?

Amazon.com has the Wise Owl Outfitters Camping Tent Footprint, which is available for purchase. A sharp item may wreak havoc on even the most durable of tents, which is why it is important to keep your temporary home as safe as possible. Ground coverings for tents help to extend the life of your tent and maintain it in good shape for longer periods of time. You can be protected against harsh items by leaving a thoughtful footprint. Pebbles, branches, roots, and other such objects are included.

Small holes in your tent can easily be stretched and trapped, resulting in a full-blown hole in your tent structure.

Moreover, the advantages of using tent footprints do not end there!

  • By using a tent footprint, you can simply prevent getting sticky tree sap on your clothes and mud stains on your clothes. When camping in the rain, footprints can assist you in keeping your tent dry. During a downpour, water may pool beneath a tent and leak in through the bottom
  • Even if it doesn’t rain, ground moisture can build under your tent and seep into your sleeping space. Tent footprints are waterproof and can assist you in staying comfortable and dry while camping

Do you require a tent footprint, then? When it comes to camping, a tent footprint is by no means required; you will most likely be alright without one provided you take the proper procedures when erecting your tent. A ground cover, on the other hand, is a wise investment if you want to keep your tent clean and extend its life. You may save a significant amount of money in the long term, particularly if you have a high-quality tent. Our discussion of this topic will continue later in the post (and we go into great length about it in our guide titled Do I Need a Tarp Under My Tent?).

How to Use a Tent Footprint for Best Results

The process of using a tent footprint is rather basic. An illustrated explanation on how to utilize a tent footprint to achieve the greatest results is provided below.

Step 1: Place the Tent Footprint on the Ground

First, pick where you want to put up your tent and mark the location with a footprint on the ground in the location you want it. Whether you are unsure which side of the tent footprint should be raised, simply check the product label to see if it states which side should be raised. You will often want the waterproof, coated side facing up and the dull or uncoated side looking down when using a waterproof coating. The footprint should be absolutely flat, so pull on each corner to make sure it is fully flat.

Step 2: Set Up the Tent Over the Footprint

Set up your tent on top of the footprint. Inserting your pole tips through the grommets on your tent’s footprint will secure it to the tent. Aside from that, some models come with straps that may be used to secure it to the tent. When pitching your tent, it is recommended to place the tent poles first into the grommets on the foot of the tent, and then into the grommets on the canvas itself.

As a result, whether you move your tent to adjust it or raise it to shake it out, the footprint will remain in place and you will not have to reposition and reattach it again.

Step 3: Make Sure the Footprint is Completely Covered

Make certain that the groundsheet does not protrude from the tent’s perimeter. It will accumulate on top of the footprint and eventually make its way between the tent and the footprint, undermining the purpose of employing a footprint in this situation.

Which Tent Footprint Should I Use?

Examine the groundsheet to ensure that it does not protrude from the tent’s perimeter. The rainfall will accumulate on top of the footprint and eventually make its way between the tent and the footprint, thereby undermining the purpose of employing a footprint in the first place.

Tyvek Tent Footprint

Tyvek is an ultra-light, breathable fabric produced from spun bond polyethylene fibers that is used in a variety of applications. Tyvek makes a fantastic footprint material, and it will assist to maintain your tent by keeping moisture out of the tent inside. The grommeted corners on the Tyvek tent footprint shown below make it simple to stake out your structure. It’s inexpensive, lightweight, and simple to pack and transport while you’re out camping with friends.

Universal Tent Footprint

Originally developed from spun bond polyethylene fibers, Tyvek is an ultra-lightweight, breathable fabric. Tyvek is a fantastic footprint material, and it will help to maintain your tent by keeping moisture out of the structure. The grommeted corners on the Tyvek tent footprint shown below make it simple to stake out your new tent. The product is reasonably priced and lightweight, making it simple to pack and transport while camping in the outdoors.

DIY Tent Footprint

You may also construct a tent footprint on your own. Making a tent footprint is simple and quick, and it allows you to customize it to match any form. It is entirely up to you how elaborate you want to make it, but it can be completed in a short amount of time for less than $15!

Materials Needed:

  • Material for the tent’s footprint (tarpaulin, Tyvek, etc.)
  • Scissors
  • A sharpie or a marker of any sort

Steps To Make a Tent Footprint

  1. The first step is to purchase whatever you have decided to use as a basis, which may be done either online or at a local hardware shop. Tarps and Tyvek are the most commonly used materials. All that is required is that the material be larger than the base of your tent. Following that, you’ll want to lay out your material and set your tent on top of it. Make a trace around the perimeter of the tent. Maintain a smooth surface on the ground and strive to be as exact as possible
  2. Finally, take your tent down and cut out the shape you created. Make sure not to cut right on the line that you traced, but rather an inch or two inside of it instead. You want to trim it so that it is slightly smaller in circumference than the base of the tent. If it is overly huge, water might collect beneath it and cause flooding.

Is a Tent Footprint Worth It? Our Take

Both yes and no. It is worthwhile to have a tent footprint when:

  • The use of a footprint is recommended if you camp regularly and wish for your tent to survive for a long period. If you want to camp in a rocky, branchy, or otherwise difficult terrain, a footprint may be necessary to protect the bottom of your tent. Consider the sort of terrain you will encounter before you camp to determine whether or not you will want to carry a footprint with you. In addition to the initial purchase expense, adding a footprint to your camping gear has minimal drawbacks if you are vehicle camping and aren’t concerned about added weight and bulk.

It is not necessary to have a tent footprint in some situations.

  • Especially if you are planning a lengthy trekking or hiking trip, every ounce of weight counts. Leaving the tent footprint at home and bringing along only the essentials may be useful in camping scenarios
  • If you’re not concerned about taking a chance, there’s no reason to waste your time and money on a tent footprint. Tents are designed to be set directly on the ground, so if you aren’t concerned about slipping, don’t spend the money on a tent footprint. If you are camping on sand, cement, or in a designated campsite, you will most likely not require a tent footprint. The most beneficial use for them is when you are sleeping in the woods on difficult terrain.

Tent Hacker is made possible by donations from readers. It is possible that purchasing through links on our site will result in us receiving an affiliate commission. Because I am an Amazon Associate, I receive money when people make eligible purchases.

Quick Answer: Tent Footprint Which Side Up

It is the readers who fund Tent Hacker. An affiliate commission may be earned when you purchase something through a link on our site. When you make a purchase through Amazon, I get a commission.

Does a tent footprint go inside or outside?

The groundsheet (not a “tarp”) is placed beneath the tent to prevent it from contact with the ground. It has nothing to do with wetness. Rain may flow off the tent walls and down the groundsheet when it rains, if the groundsheet extends beyond the tent walls. The rain may run down the groundsheet and down the tent floor.

How should a tent footprint fit?

What should the footprint of a tent be in terms of size? The footprint of a tent should, in most cases, be somewhat smaller than the base of the tent. This is done in order to prevent water from collecting between the footprint and your tent, which would completely contradict the purpose of the footprint!

Is 3000mm waterproof enough for a tent?

A tent made of 3000mm HH (Hydrostatic Head) material will keep you absolutely dry for the majority of camping trips in the United Kingdom.

Any point of entrance into the tent is a weak spot in the waterproofing, but a well-designed enclosure surrounding the doors may make a significant difference in keeping the tent inside dry.

Should tent footprint be smaller than tent?

What size should the tent’s ground footprint be? It is preferable to get one that is approximately 2 inches smaller in circumference than the bottom of the tent. If it rains while you’re camping, you won’t have to be concerned about water seeping underneath the shelter and dampening the entire ground under you.

See also:  How To Make A Tent Blackout

How do you make a tent footprint out of Tyvek?

Footprints for a DIY Tyvek Tent Step 1: Make a game plan. To begin, you must determine what materials you will use and how much you will require. Step 2: assemble your materials. The materials I utilized were as follows: Step 3: Take measurements and draw diagrams. Step 4: Trace the Footprint and cut it out. 5. Tape the seams together. Grommets should be applied in the sixth step. Step 7: Secure the Nylon Cord. Everything has been completed!

Can I use a tarp as a tent footprint?

A tarp can be used as a tent footprint if necessary. As a result of the tarps’ longevity, we frequently use them to shield the tent’s outside from exposure to the weather. As a result, a tarp may be placed beneath the tent to protect the ground from the elements as well as ground debris.

Can you wash a tent footprint?

After each camping trip, you’ll need to wash down the footprint of your tent to keep it looking clean and fresh. Using cold water and a sponge, wash them thoroughly, and if the dirt does not come off with the water alone, use a tent-specific wash. The coating on your footprint will not be degraded by using a tent-specific wash.

What is the most comfortable way to sleep in a tent?

Some of the things I’ve done to stay warm while yet being comfortable include the following: Place thin foamies, foam squares, or really thick woolen blankets under the air mattress at the bottom of the tent to keep it from sinking in. Thick wool blankets should be placed on top of your air mattress, and then a fitted sheet should be used to keep that insulating layer intact.

What does a footprint do for a tent?

A tent footprint or ground cover is simply anything that serves to protect the tent’s floor from abrasion. For the reason that after a tent is set up, the weight of the person sleeping within it, as well as the tossing and turning they do during the night, wears away the waterproof coating and may eventually cause the fabric to fray.

Why do tents get wet inside?

What is the source of condensation in tents? Because of the presence of people, heaters, and a lack of ventilation, the air temperature in the tent might become warm and humid. During the condensation process, moisture condenses into liquid form when the heated air within the tent comes into contact with the comparatively chilly tent fabric.

Why use a tarp under your tent?

It is important to have a tarp underneath your tent to protect the underside from wear and tear, to provide minimal insulation, and to prevent water from entering the tent by functioning as an effective moisture barrier.

Is a tent footprint worth it?

If you want to camp on rugged, rocky terrain with a high likelihood of sharp points and rough edges, leaving a footprint is often a good idea.

Except for the expense of acquiring a footprint, if you’re vehicle camping and don’t mind a little more weight and bulk with your tent, adding a footprint offers little drawbacks other than the cost of obtaining one.

What should I put under my tent floor?

Always utilize a ground cover under your tent, regardless of whatever choice you pick. This will assist to prevent moisture from seeping through your tent and getting into your stuff, as well as extending the life of your tent. Ground cover or a tarp protects the tent from abrasive ground, which will wear down the floor of any tent, no matter how robust the material is.

How do you waterproof a tent floor?

There are three different methods for waterproofing your tent: The use of seam sealer can aid in the prevention of moisture leaking through the seams. Refresh the urethane coating by doing the following: The principal barriers against moisture are the urethane coatings on the interior of your rainfly and the floor of your tent.

Should I put a groundsheet under my tent?

Even if you have a tent with a built-in groundsheet, you need place another groundsheet below your tent to protect it from the elements. This will protect the floor of your tent from damage, keep it clean, and provide as an additional layer of insulation against the cold during the winter months.

How thick should a tarp be under a tent?

The outer measurements of your tent should be 2-3 inches less than the outside dimensions of your tarp. This will aid in the prevention of pooling. Prepare the area where you will be erecting the tent by clearing it of debris. You want to get rid of all of the branches and jagged rocks in the area.

How do I keep my tent floor dry?

Instructions for Keeping the Tent Dry Under your tent, spread a ground cloth to protect the ground. Maintain a higher elevation for your tent than the surrounding region at all times. If the floor is leaking, using a sheet inside the tent might assist keep the flooring more dry. Make certain that you have a tent with a rain fly that provides adequate protection.

Tent Footprints: The Reasons You Really Need One

This page contains information about tent camping tips. Tent Footprints: The Reasons Why You Should Consider Using One Learn why and why a tent footprint is required, how to use it, and most importantly, how to select the proper sized groundsheet for your specific tent in this article. Read on!

When and why are tent footprints necessary?

Almost all of us forget that our tents are simply sheets of some form of polymer that have to withstand a great deal during the course of their useful life. Moisture, UV rays (does your tent have UV protection? ), water, fire (sometimes), mold, condensation– the list is endless. Nevertheless, everything said above is something that you can notice and act on right now. The difficulty arises when the damage is done to portions of the tent that are rarely seen, such as the underside of the floor of the tent.

Gritty soils, sand, and rocky terrain, on the other hand, are the most perilous of all.

The use of a tent footprint is recommended while camping on a gritty, abrasive, or rocky terrain. This will help to prevent the tent floor from incurring irreversible damage such as the following:

  • Punctures
  • Deterioration of the waterproof covering (for example, when it comes into contact with sand)
  • And When the tent is not securely anchored and the floor is sliding over steep terrain, rips are quite likely to develop. Mold development occurs when a tent is left on moist ground for an extended period of time.

Abrasions and punctures; degradation of the waterproof covering (for example, when it comes into contact with sand); and When the tent is not securely anchored and the floor is sliding on sharp terrain, rips are a common occurrence. When a tent is left on moist ground for an extended period of time, mold can form.

What are tent footprints and how do they work?

Essentially, a tent footprint (also known as a groundsheet) is a sheet of extremely resistant fabric, most typically made of polyester or nylon, that is placed below a camping tent’s floor to protect it from rips, wear, and tears when camping on unlevel or uneven terrain. When you step inside your tent, the floor will move/slide ever so little, and if the soil beneath the tent is hard enough, this might cause damage to the waterproofing layer or, even worse, a puncture in the tent’s waterproofing.

This is due to the fact that it is composed of a very resilient fabric that is capable of withstanding any form of abuse.

Because all of the sharp edges on the equipment will rub against the floor, the inside of the vehicle will often wear down faster than the outside.

Learn more about what more you can do to keep your tent in good condition.

How big should the tent footprint be?

It is preferable to get one that is approximately 2 inches smaller in circumference than the bottom of the tent. If it rains while you’re camping, you won’t have to be concerned about water seeping underneath the shelter and dampening the entire ground under you. Consider contacting the tent’s maker to see if they offer footprints for that specific model in order to make your life a little less complicated. The likelihood is that the majority of them will sell them, but you must be prepared to pay a premium for their services.

But, at the very least, you won’t have to be concerned about the sizes since you will be certain that they will fit flawlessly.

Those edges have been heavily stitched to provide additional reinforcement.

Tent floor durability and waterproofing ratings

In today’s market, almost all of the tents that you may purchase should have a denier count listed somewhere on their specs page. It is the overall thickness of the threads that make up the cloth that is represented by the denier count (in our case, the floor of the tent which is usually thicker than the body). We may use this measurement to make an educated guess about the material’s long-term durability. In general, the greater the denier of a material, the more durable the material is going to be.

  • If your tent floor material has a denier between 70 and 150, it is considered to be a very durable material, and in this case, using a tent footprint under normal camping conditions is not necessary.
  • However, these sorts of tents are far more expensive, and for an additional $30 dollars, you can likely get a universal footprint that will provide further protection (better safe than sorry).
  • A hydrostatic head measurement is what this is referred to as.
  • The use of a tent footprint is required if the hydrostatic rating of your tent floor is only about 1200-2000mm, even if the soil appears to be dry.

This is due to the fact that condensation will always occur underneath the tent, and while the soil may appear to be dry at the top, deeper water might begin to evaporate and accumulate beneath your tent.

Campsite selection determines the need for a footprint

The choice of a camping location might also influence whether or not you require a tent footprint. In the case of forest floor camping, you will very certainly find yourself pitching your tent on ground that is riddled with brambles, twigs, pebbles, roots poking out, and other such hazards. It may be vital to use a footprint in this situation if you want to be certain that you are not damage your tent. Also, even if you’re using a groundsheet, it’s a good idea to spend a few of minutes attempting to clear the ground before you start working.

The grass should be sufficient to serve as a footprint and protect the floor of your camper.

This is due to the fact that the ground where people used to sleep has changed into a “dish” over time.

Even the tiniest submerged space can have all of these characteristics, despite the fact that they are not apparent to the naked eye.

Terrain type Denier50 Denier50
Grassland Not required Not required
Sandy beach Required Required
Forest floor Required Optional
Rocky terrain Required Required
Snow Optional Not required

The requirement of tent footprints is determined by the kind of terrain encountered.

Winter camping

Is it necessary to use a tent footprint when camping in the winter? The answer is dependent on the two sorts of circumstances that you are most likely to come across:

  1. Camping on snow – if this is the case, a tent footprint is not required as long as the amount of snow covering the ground is sufficiently deep
  2. Camping on frozen ground– In this situation, it is preferable to use a tent footprint rather than a groundsheet since moisture can accumulate below the tent and cause it to freeze fast. Frost may harm the waterproofing layer on a tent and, in extreme cases, it can freeze so hard that it causes the floor to tear as you’re raising the tent from the ground.

Beach camping

Is it necessary to leave a footprint when camping on the beach? A tent footprint is almost always required while camping on the beach, regardless of the season. This is due to the fact that sandy soil is the most abrasive of all the soil types (think sandblasting). Sand may cause damage to the tent floor in a variety of ways, but the most typical issue is that the tent floor will shift ever so slightly on top of it, which is comparable to rubbing it against sandpaper. The waterproofing layer will be completely gone in a short period of time.

Best universal tent footprints that you can buy

A universal groundsheet is the most cost-effective and simple option if your tent does not come with a footprint (which, in most cases, is sold as a pricey optional item by the manufacturer). You’ll discover the most cost-effective option farther down this page.

3. Marmot Ultralight

Despite the fact that the most of us are accustomed to hefty groundsheets, if you’re looking for something lighter, this would be the best option. People normally avoid using footprints since they add extra weight to their backpacks, which is something no one wants, especially if they’re camping. However, this device is lightweight and compact enough to be carried in any backpack. Really, if you want to do something, your weight isn’t an issue. The fabric is made of featherweight nylon. Sizes:This option is only available for 4 and 6 person tents.

It may be used just as a footprint for a specified size and no other purpose. It does not come with any reinforcements, which is a disappointment. Waterproofing: It is waterproofed on both sides of the product. Price range (in dollars): HighVendor: See if there is any availability on Amazon.

2. ALPS Mountaineering

Excellent value for such a high-quality cloth. It’s also available in a variety of tent sizes, and it takes less than 5 minutes to put together. It is quite sturdy, thanks to the reinforced edge and strong sewing, and it should last you for many camping seasons to come. Polyester fabric is used in the construction of this item. Tents are available in a variety of sizes ranging from 2 to 6 people. Multipurpose:No. It may be used just as a footprint for a specified size and no other purpose. It does not come with any reinforcements, which is a disappointment.

See also:  How To Get Mold Stains Out Of Tent Trailer Canvas

The manufacturer does not specify if the product is coated on both sides.

Terra hiker universal footprint

A true versatile design that may be utilized for a variety of purposes other than camping. People frequently utilize these groundsheets for a variety of additional purposes, such as serving as a tarp for their vehicles. This is a multi-purpose product that will serve you well for many years to come! 210D Oxford fabric is used for this project. Sizes: 59′′ x 86′′ (150 x 220 cm), 70′′ x 86′′ (180 x 220 cm), 94′′ x 86′′ (200 x 220 cm) (240 x 220 cm). Picnic blanket, tarp, groundsheet, and rainfly are all multipurpose.

Waterproofing: It is coated on both sides with a waterproofing agent.

DIY tent footprints and lower-cost alternatives

People have spent a lot of effort making their own groundsheets, stitching grommets, and trimming sheets of Tyvek or polypropylene to fit their tents, as I’ve observed while walking around town. The results are pleasing, but I have a concern about this: what if you decide to replace your tent? Most likely, you’ll have to start from the beginning. As a result, why not spare yourself some trouble and simply get some low-cost blue polypropylene? Make no effort to trim it to the proper size; if it’s too large, simply fold it below your tent to make it smaller.

How to correctly set up a tent footprint

Time required: ten minutes. How to properly erect a tent’s ground footprint

  1. Choose a location for the tent and the groundsheet to be installed. First and foremost, you must position the groundsheet precisely where you want the tent to be. Find out which side of the goods is waterproof by looking at the label. Most of the time, the shiny side (coated) will be facing up (facing the tent), and the dull side (uncoated) should be facing down (facing the ground). Prepare the tent by putting it up on the ground. Begin erecting the tent on top of it by placing the tent poles into the grommets in the footprints. Some may have straps connected to them in order to attain a more secure fit
  2. Check to see if yours does. Check to see if the installation was done correctly. Ensure that the sheet does not protrude from the wall, and if it does not, you’re done.

In the event that you have one that you created yourself, you can simply place it below and everything will be great. Just make sure you set your tent on level ground or you may end yourself falling off.

Frequently asked questions

Is it possible to utilize a tent footprint as a tarp? It is possible to use a tarp with multifunctional footprints such as Redcamp or Terra Hiker without making any adjustments to the footprint. If the product is intended to be used exclusively as a groundsheet, you’ll most likely need to hunt for a more appropriate tarp to replace it. The bulk of footprints are narrow because they were intended to be somewhat smaller in size than the tent’s ground surface. These proportions may not be suitable for a tarp of similar size.

  • What should the thickness of a footprint be?
  • Lightweight variants have a thickness of only 0.5 millimeters, whereas heavy-duty ones have a thickness of 1.8 millimeters (see illustration).
  • All of the tent footprints have at least one side that is waterproofed, if not all of them.
  • In most cases, if you go with the one that the manufacturer recommends, you’ll end up with a footprint that has the same Hydrostatic Head rating as the tent.
  • Although their primary function is to guard against abrasion, using one will increase the waterproofing value by a factor of two, which is not a bad idea when you consider that the more pressure you apply to a tent’s floor, the more it loses its ability to withstand water.
  • You must wash the footprint with cold water and a sponge when it has dried.
  • Never wash your clothes in the washing machine since it might shred your footprint.

If you don’t have a specialized cleaning product on hand, soak the footprint in WARM water for an hour or two before beginning to remove the dirt from it.

Don’t leave it out in the direct sunshine.

Is there any insulation provided by groundsheets?

In this case, space blankets or insulated footprints might be utilized to keep the space cool.

A glossy side (which should be coated for waterproofing purposes) and a dull side (which should not have any coating at all) are common characteristics of footprints.

So that the waterproofing layer does not become destroyed, this is done.

Any dirt that is left behind will scrape the coating, since the tent will always slide a little bit over the groundsheet when it is being used.

Painter’s Tarp Sheets are also known as painter’s tarps, and while they are far lighter in weight than your typical footprint, I would not advocate utilizing them on a regular basis.

Is it necessary to tie the footprint to the tent?

However, as we all know, we are often forced to use a universal sheet, which will never be the precise size of the tent we are setting up.

With the exception of those who are camping on a steep slope where there is a possibility of the tent sliding down the valley, you should be alright without securing the pole to the tent’s bottom.


The primary functions of any footprints, whether purchased or made by hand, are to protect the more expensive tent from difficult terrain, to keep water away from the tent floor, and to assist in keeping the tent clean when it is muddy. As a result, even if the durability of your tent is sufficient to avoid the need for a footprint, it is recommended that you purchase one. Because the cost of a universal footprint is so minimal, it’s always a good idea to invest in one. In the event that your budget does not allow for it, even a simple DIY groundsheet may work miracles, and you can construct one for as little as $10.

When using a footprint, which side goes up?

The glossy side, which includes the logo, rises while the matte finish descends toward the ground.

How do I pitch a Hilleberg tunnel tent?

  • Begin by installing the poles, making certain that all of the parts are properly seated together. To set up the tent, start at one of the sides and put a pole into the pole sleeve just above the pole tensioner, sliding it all the way to the other end
  • Then, with the pole end that is closest to you inserted into the pole tensioner cup, pull the webbing until the edge of the tent reaches the holder, and repeat the process. Repeat the procedure described above with the remaining pole parts. To set up a tent like the Keron, which has two similar entrances, either end can be staked down first
  • To set up a tent like the Keron, grip the front corners and draw the tent out taut, then peg them down. When putting the tent up for the first time, it is best to relax the adjustable peg attachments so that they are at their greatest potential length. It is usually recommended that you man out your tent so that you may attain more tension later on. This is especially vital if there is going to be wind or if the weather is going to be terrible
  • Nonetheless,

As the inner and outer of your tent are meant to be pitched together, you won’t need to take them apart unless you choose to pitch one of them independently. For more thorough instructions relating to your tent, please go to the pitching instructions website, where you may see videos of each tent being pitched and obtain a PDF of the instruction book that came with your tent, among other things.

How do I pitch the inner tent separately?

  • To begin, detach the toggles on the inner tent and pull it out of the way. Prepare the inside tent by laying it out. Attach the pole holders (which may be ordered separately) to the toggles on the sides. Using the elastic shock cords as guides, you can now slide a pole across the canvas and into the pole holders on either side of the tent. On a tunnel tent, repeat the operation with the opposite pole(s). Using the inner tent as a guide, tie a guy line to each pole at the top of each side of the inner tent and peg them out to help you build it. The Akto, Allak, Soulo, Staika, and Tarra tents require separate pole holder kits that include additional webbing to attach the pole holders to the tents
  • The Akto, Allak, Soulo, Staika, and Tarra tents do not require separate pole holder kits. Please refer to the tent descriptions to see how many pole holders are required for your particular tent type.

More thorough instructions pertaining to your tent may be found in the instruction book that came with it, which you can find here. These throwing training books are available for download as PDFs from the pitching instructional website.

My tunnel tent is noisy, in strong winds, what can I do?

Make certain that the tent is correctly pitched and that it is completely taught. When tightening the adjustable pole holders, make sure the outer tent hits the bottom of the pole holder at its lowest point. It is necessary to draw all guy lines to their maximum length and secure them with pegs. It is also necessary to secure the man lines that are linked to the vents. If you are camping in winter circumstances, you may have the benefit of being able to dig a little deeper into the snow before pitching your tent.

Keep in mind that the wind will bring more snow with it and may cause access to get obstructed.

How tight should the door band be on my tent?

The door band’s function is to maintain the door of your tent at the proper size so that the zippers may operate properly. It is made of nylon. A tight enough door band is required to ensure that there is no stress across the zippers in order for this to be accomplished. The door band, on the other hand, should not be overtightened to the point where the door hangs freely when the door is closed.

How tight should the ground straps be on my tunnel tent?

When using our tunnel tents, the ground straps assist in maintaining the proper height and tension of the poles. When they are properly adjusted, there should be no tension on the connectors that connect the inner and outer tents caused by the poles themselves. Because of the excessive tension created by the ground strap, the poles will be put under unnecessary stress, and the inner tent will sag inwards at the sides.

My tent has seen a lot of heavy use, how can I re-treat the fabrics?

In addition to being extremely robust, our textiles are also waterproof and highly water-repellent. Sun, wind, rain, and wear, on the other hand, will deteriorate any cloth with time. More information on how ultraviolet light may degrade textiles can be found here. Re-treating the fabric will increase both the protection against UV damage and the water repellency of the fabric, but it will have no effect on the tear strength of the cloth. Restoring the condition of your outer tent The Nikwax TentGear SolarProof, which is simple to apply and does not contain fluorocarbons, is the product we suggest for re-treating our outer tent materials.

TentGear SolarProof should be sprayed or brushed over the cloth, and any surplus liquid should be wiped away.

Please keep in mind that TentGear SolarProof should not be used on a new tent, but rather on a tent that has lost its water resistant capacity over time.

Restoring the condition of your inner tent Nikwax TX may be used to restore the water repellency of your inner tent after it has been exposed to the elements for an extended length of time.

Spray the TX with the same method as with TentGear SolarProof. Directly after, wipe away any extra liquid and allow it to dry. We encourage you to visit if you would like additional information about these items as well as information on where you can purchase them.

My tent is dirty. How do I clean it?

Setting up your tent and then cleaning it with a sponge and lukewarm water after your journey is a wonderful idea once you return from your adventure. We strongly advise against the use of any cleaning chemicals. Using a tiny brush, thoroughly brush the zippers to ensure that no sand or grit is left in the teeth of the zippers is also essential. Sand in the zippers can wear out the sliders, preventing them from functioning correctly again after they have been cleaned. Check and double-check that your poles and pegs are clean and free of damage before using them.

See also:  Where Can You Camp In A Tent For Free

If the tent is really unclean and dusty, we usually wash it in the washing machine.

No matter how you clean it, be certain that the tent is totally dry before putting it away for the season.

How do I use a line runner?

1. To loosen the Line Runner, use your fingers to draw the line away from the Line Runner’s body, as indicated in the illustration. Pulling the line into the Line Runner’s channel will secure it in place.

My pole broke, what do I do?

One extra pole piece as well as a repair sleeve are included in each pole bag for convenience. In the meanwhile, you may use the repair sleeve to temporarily fix your pole until you get an opportunity to replace the damaged pole segment. To get a PDF with step-by-step instructions on how to repair a tent pole, click here. Making use of a repair sleeve Twelve. Slide the sleeve over the damaged pole and center it over the damaged area, then tape the ends of the sleeve together to secure it in place.

  1. Pull the end-stop of the pole out until the knot in the shock cord is visible.
  2. 2.
  3. Untie the knot and remove the end-stop off the cord to complete the process.
  4. Pull the pole apart to reveal the shock cord that is hidden underneath the broken piece of the pole.
  5. 4.
  6. Keep track of the order so that you can replace them in the proper sequence.
  7. 6.
  8. Reattach the end-stop to the shock cord with a knot.

My zipper doesn’t work, how do I fix it?

When there is a problem with a zipper, the first clue that anything is wrong is that the zipper will not remain closed when you try to zip it closed. What generally causes this is dirt and grit in the zipper, which wears microscopic grooves on the inside of the zipper slider as a result of the zipper being used. You may make a temporary repair by pinching the edges of the zipper slider together until you have the opportunity to replace it. It is critical to clean your zippers on a regular basis in order to avoid this from happening.

  • In order to replace the zipper sliders, first open up the stitches at one end of the zipper and then remove the little metal clip that is attached to it.
  • Remove the old sliders by sliding them off.
  • Install the new sliders by sliding them on and making sure that they are facing in the same orientations as the previous ones.
  • Double-check that the sliders are aligned appropriately, not only in the front and rear but also in the top and bottom.
  • It might be difficult to put the slider on with the flat end first on some occasions.
  • 6) Once you’ve begun to slide the zipper slider along the zipper, continue to pull on either side of the zipper to complete it.

7, 8. Once the sliders are in place and functioning properly, rejoin the stitches you undid and sew a few stitches to seal the end and prevent the sliders from coming loose again. Reset the metal clip if at all feasible.

How do I attach a line runner?

12. Feed the guy line through the opening on the bottom of the Line Runner, which is triangular in shape. 3. Pull the line through the connection point until it snaps into place. In the same manner as shown, thread the second end of the guy line through the other hole on the top of the Line Runner. 5. Tie the end of the guy line in the manner indicated on the right side of the picture. We propose that you tie your knot using an overhand knot. This completes the installation and makes your Line Runner usable.

How do I attach the Footprint?

The best time to attach your Footprint to your tent is just before you want to go camping. Lay your tent out on the floor with the floor facing up if you’re indoors. The Footprint should be placed directly on top of the tent floor with the logo side facing the floor, and its logo should be aligned as follows:

  • If the Footprint extends into the vestibule, the logo or logos on the Footprint should be aligned with the centre of the main outer tent door or doors if the Footprint covers the vestibule. Keep in mind that the main door on the Kaitum GT and Nallo GT is the large entrance, rather than the small entrance near the front of the extended vestibule
  • If the Footprint does not cover the vestibule, the logo on the Footprint should align with the logo on the inner tent door
  • The Rogen is an exception to this rule due to its asymmetrical design. When the Rogen Footprint logo is displayed, it should be in alignment with the logo that appears on one end of the Rogen outer tent.

Look on the back of the Footprint’s hang tag for specifics about your particular tent model. Once the Footprint is properly oriented, attach the toggles that are located around the circumference of the Footprint to the rings that are located at the bottom border of the outer tent’s bottom edge. When the tent is fully assembled, the reflective side and logo should be facing upward. When you pack up your tent at the end of a trip, you may leave the Footprint still connected. Just make sure that the entire tent, as well as the Footprint, is totally dry before putting it back in its place.

Why do the footprints on the Anjan, Rogen, and Niak tents not cover the vestibule?

The optional Footprints do not cover the vestibules on the Anjan, Rogen, and Niak tents since the outer tents do not extend all the way to the ground on these three models. During heavy rains, water can seep into the vestibule through the space between the outer tent wall and the ground in the vestibule. If the Footprint covered the vestibule area, water may seep below the tent and cause it to collapse.

My tent is paler after a lot of time in the sun, what happened?

In addition to being extremely robust, our textiles are also waterproof and highly water-repellent. Sun, wind, rain, and wear, on the other hand, will deteriorate any cloth with time. A faded or bleached appearance to the fabric indicates that the cloth has begun to be affected by ultraviolet rays. UV rays from direct sunshine have negative effects on our skin, and the same is true for all materials, including tent fabrics (which is terrible). With prolonged exposure to the sun’s radiation, particularly at altitude and in the southern hemisphere, the performance of a cloth can be compromised.

Extended exposure to ultraviolet radiation (UV) weakens the tear strength of any fabric, which is one of the primary reasons we employ materials with high tear strength.

This, on the other hand, does not imply a deterioration in the fabric’s waterproofing properties.

More information on how to withdraw your tent may be found here.

Pitching your tent in the shade with a tarp over it and not keeping it set up during the day while you aren’t using it can help you achieve this. In high UV conditions such as high altitude, glaciers, and deserts, this is especially crucial since the skin can burn easily.

How do I roll my outer tent door?

We recommend rolling the door in a certain manner rather than just bundling it and securing it with the toggle because it works better to keep it out of the way, it is more secure, and it keeps the door and zipper from dragging in the mud, which will extend the lifetime of your tent. To roll the door, begin by rolling the fabric of the door in the direction of the toggle. As you continue, collect the cloth toward the toggle by folding the loose end of the roll in and gathering the fabric. One of the objectives is to bring the main body of the door, including the zipper’s end, beneath the toggle.

Pull out the elastic loop and thread it through the toggle when you have the door fully rolled.

How do I replace the shock cord in my pole?

Please click here to get a PDF version of these instructions. a fresh length of shock cable 70 percent the length of your pole is cut from the existing length To prevent the line from fraying within your pole, we recommend heating the ends of the cord to seal them and prevent fraying. Place the pole in the desired position and pull one of the pole’s end-stops out until the knot in the shock cord is revealed. If necessary, you can use pliers to remove the end-stop out of the way. To release the end-stop, untie or cut the knot on the end-stop.

Remove the end-stop by untying or cutting it.

Check to see that the end-stop is completely seated.

Thread as many portions as feasible onto the shock wire while still leaving a few inches of shock cord exposed at the end.

5: Tighten the shock cord and secure it with a peg or similar item tied to the shock cord with an easy-to-release knot to prevent it from slipping back into the sections.

Continue to thread the remaining portions onto the shock cord, making sure to seat them as you go.

Remove enough shock cord to allow you to knot the end-stop on with your fingers.

Tent footprint – Which way is up?

  1. I have a trekking tent with one of those fancy, cut-to-fit footprint tarps that you can get at camping stores. One side has a rubbery covering, whereas the other does not. Is it better to place the coated side up or down? Thanks
  2. I doubt it makes a difference, but I place the rubbery side down on the fabric, reasoning that this is what prevents the moisture and that there is no need for the fabric to get statuated before hitting the barrier. – Mark et al. I was thinking exactly the same thing as you were. Then I had another notion. However, if I place the rubbery side up, it will be less likely to be destroyed by pebbles and other debris. That was the point at which my small brain shut down
  3. The footprint of my sierra lightning tent is the same way as well. Putting the coated side down has never caused any problems for me, even after multiple visits and several downpours
  4. That’s also my recommendation. A mild coating (non-rubber) has been applied on both sides of my footprint
  5. Check out our following post to learn which direction the toilet paper is supposed to be placed on the roll holder. – Mark et al. I have a REI tent with a footprint that matches perfectly. They each have one corner that is a different color loop than the rest of the corner set. When you put things together, the rubber side should be on top. Which makes more sense to me since it is more likely to be damaged on rocks
  6. It’s the same as with the motorbike, in my opinion. Maintain the rubber side down
  7. No matter how you look at it, it sounds like a vapor barrier. +1Wad. MaplePaper in a plastic bag, please
  8. So, should I go with the Touratech ground cloth or the Wunderlich ground cloth? What exactly did you guys order? Is it true that the blue ones are faster? According to the instructions on my REI tents, the coated side should be towards the tent floor (ie, up). It appears to be a decent technique to retain waterproofness (is that even a word?) by preventing abrasion from sand, pebbles, twigs, and other foreign objects. I’ve been doing it for years and have never had a problem. YMMV
  9. Thank you so much for going above and above
  10. Thank you for the suggestions from some of you, as well as from the rest of you. Thank you for providing fun! VT
  11. In order for the paper to be away from the wall! The worst feeling in the world is getting someone else’s shit under your nails in the middle of the night while trying to grab the toilet paper that has fallen flush (no pun intended) against the wall thanks to people who haven’t mastered wiping their own arses without getting their digits dirty while also trying to obtain said flush against wall toilet paper. If anything is done the “wrong” way, I always turn it around. PS: No, I’m not an officer of the law
  12. It’s only the individuals who drive/ride 20km/h under the legal speed limit in the overtaking lane who irritate me.

Leave a Comment

Your email address will not be published. Required fields are marked *