Printable How To Use A Photo Shooting Tent Guide

How to Make An Inexpensive Light Tent – DIY

The following instruction on how to build an Inexpensive Light Tent was submitted by Jeffrey Bail and is reprinted with permission. Jeffrey’s Flickr account may be found here. Note: While this is a fantastic DIY method that hundreds of our users have used, Amazon has a large selection of affordable Light Tents that will provide you with excellent results. How do you go about creating a fantastic DIY light box? It’s all right here in this article! You know, if you’re anything like me, you don’t want to spend money on anything if you can do it yourself and get the same results for less money and effort.

In its simplest form, it was a folding white cloth box with a hole in the front and three lights, which were used in photographic studios for photographing tiny items (like the shot of the chocolate reindeer to the left).

I’m not going to spend $100 on some cloth and three lights when the material is far less expensive.

Materials Needed:

First, a box– It may be any size you choose, so long as it can hold enough fuel to burn! It should be as square as possible, in my opinion. Boxes may be found for free almost anyplace. I received mine from work, which they were about to toss away anyhow. Boxes can also be found in the rear of strip malls, grocery stores, appliance stores, and pretty much any other establishment that manufactures or sells goods. The greater the thickness! (Free) 2.) Fabric’ This can be of any sort, once again.

  • Purchase enough to completely cover the box.
  • If you’re on a tight budget and happen to have some white undershirts lying around, go for it.
  • If you plan to utilize numerous shirts, be certain that the colors are complementary otherwise your final product may not come out as you had hoped.
  • The reason for this is that you may wish to experiment with different textiles.
  • ($1.00 per roll in the United States) 4.) Glue’ To adhere the lining to the box, you can use a “Glue Stick” ($1.00 US each Stick) or spray adhesive ($5.00 US per Can) to adhere the lining.
  • 5.) White Bristol board (.50 a sheet X2).
  • In drawing and art, Bristol board is a heavyweight paper (.006′′ thick) that is used as a drawing surface.

You may also choose multiple colors for your background if you like a different look.

The lighting in this box, in my opinion, is the most significant component.

I went to my local hardware shop and purchased a few “Daylight” Bulbs to experiment with.

In order to save money, I purchased “n:vision” 90-watt equivalent compact fluorescent lights ($7.00 US).

Also, consider recommending a lighting fixture.

If you don’t have one, I recommend investing in a “Clamp On Work Light.” There were just two varieties available at my local home depot.

Tape ruler, ruler or any straight edge, scissors and knife are some of the other tools you’ll need. Now that you have the materials, I’ll walk you through the process of building a light tent step by step. Then you’ll be able to capture some excellent, clean, and crisp product photographs.

Step By Step Process:

A) Take your box and, using a tape ruler and a pen, measure in 2 inches from the side of the box, marking various spots on the box. When you are finished, you will be able to see your border. Connect the points with your straight edge to create a lovely looking square/rectangle in the centre of the box with a 2′′ border around it when you are finished. You may leave the top and bottom of the box alone because you will not be marking them. B) Cut out the shapes you’ve drawn in the boxes. That should be repeated on the sides of the box where the boxes have been drawn.

  • Then, using your scissors, cut off 16 strips from the fabric.
  • Make certain that the side with the marker is towards the cardboard so that it cannot be seen.
  • In the box, insert the long piece of Bristol board until the piece curls downward to the bottom.
  • Remove any extra paper that is protruding from the top of the container.
  • Then cut a large piece of paper so that it will cover the top of the box completely.
  • After that, tape the top piece in place.

You only have to spark the cigarette lighter at the top of the box to begin taking pictures.

If you’re having trouble with shadows, I recommend illuminating the other sides of the box as well.

Photoshop might also be a useful tool in some situations!

I also increase the brightness by adjusting the values.

An example of how the Light box works Another outcome of the above-mentioned light box

How to make a DIY light box: conclusion

Now you know what I’m talking about! As you should now be aware, building a beautiful light box is a rather simple process. So go to work on your lightbox. And then put it to the test on some interesting items.

(And be sure to share your findings in the comments!) Did you find this tutorial useful? Get additional information every week by subscribing to our free email newsletter. Also out our otherDIY Flash and Lighting Hacks for Digital Photographers for more inspiration.

How to Use a Light Tent for Small Product Photography

The desire to photograph their own products in good quality is common among crafters, cooks, and painters, whether they wish to display them in a blog post, sell them on the internet, or simply share them with friends and family. It is necessary to employ a light tent in order to take these kind of product pictures quickly and consistently. It is the goal of this article to teach you the principles of shooting with a light tent so that you can consistently produce bright, high-quality product shots.

What is a Light Tent?

It is possible to create an artificial light tent or light box by using translucent sides to scatter the light coming from numerous sources. This enables for steady, practically shadow-free illumination to be achieved over a plain, consistent background. You may purchase a light tent as part of a kit, or you can make your own light tent using simple tools and materials. Choosing to purchase a light tent kit will often include one or more light tents, two light bulbs, two light stands, a tripod, and cloth backgrounds in a variety of colors, depending on the model.

Are you unsure which to choose?

Shooting with a Light Tent

Lighting tent photography is often performed with the tent placed on some type of table, such as a coffee table, with the light sources on either side of the tent precisely opposite each other, and the tripod centered in front of the tent. In addition to making it simpler to see and manage the tent, setting it up on a table also makes it much easier to photograph with a tripod. The background is fastened at the top of the tent, within the tent, and should be able to fall freely down into a soft curve at the rear of the tent, and then over the bottom of the tent to complete the look.

  1. Be sure to press any cloth backdrops you use to get a totally smooth finish on the final product.
  2. Consider having a lint roller or tiny blower on available to deal with the inevitable dust and debris that will inevitably accumulate.
  3. Placing your subject properly within the tent and starting with it in the precise middle will provide the best results.
  4. Experiment with different looks to achieve the appearance you desire.
  5. Allow enough space between your subject and the walls so that you may zoom in or position your camera so that you only see the backdrop and not any of the surrounding walls and ceilings.
  6. It appears that there is no difference between photographing during the day in diffused interior light and photographing at night with simply the lights themselves providing illumination.

Direct sunlight glaring into or at your tent should be avoided at all costs, since it will be impossible to maintain a stable equilibrium with such a bright light source.

Camera Set-up

To guarantee that your tripod remains stable, tie your camera to it with a tripod strap and use a 2-second timer or a remote shutter release to release the shutter. The switch should be set to “off” if you are using a lens that has image stabilization, vibration reduction, or vibration control built in. The tripod will allow you to shoot at slower shutter speeds while still getting sharp images. To begin, shoot in aperture priority mode with an ISO of 100 and a tripod (or the lowest value for your camera).

The use of wide apertures and selective blur to make food appear more appetizing is common in food photography, but product photos of crafts and handcrafted products look best when taken with a low aperture to keep the entire object in focus is preferred.

Additionally, consider utilizing exposure compensation to take a series of three images at different exposures (e.g., 0, 1, and +1), so that you can determine which produces the best results for you.

If a full stop is either too dark or too bright, a half or a third of a stop may be more appropriate.)

Post-Processing Considerations

It can be difficult to achieve the perfect white or black background in your photographs while also ensuring that your subject is properly exposed. It’s possible that you’ll need to do some additional post-processing to ensure that your whites remain white and your blacks remain black in those situations. Although the following description makes extensive use of the tools available in Adobe Photoshop, you should be able to perform many of the same procedures with other software products as well.

  1. The color temperature of the light produced by most light bulbs is listed on the bulb itself, and you can use this information to guide you through the process of setting the white balance.
  2. When processing, go to your histogram for guidance.
  3. If you clip your background (either to the left for black or to the right for white), you will achieve a completely homogeneous look to your background and will be able to direct all attention towards your subject.
  4. To see which areas of the photograph are being clipped, hold down the Alt (Option for Mac) key while adjusting the sliders, as illustrated in the image above.
  5. Depending on how much your subject is influenced by this action, you may need to reduce the amount of modification you make.
  6. Alternatively, a not-quite-white background on a shot that is displayed against a pure white background on a web page runs the risk of appearing dingy and unprofessional.
  7. Cheers!

Do you have a tip for shooting with one that would be useful to others? Fill in the blanks with your thoughts and photographs in the comments section below. An additional photo taken from the vase with flowers shown in the first image at the top of this article.

For more on product photography check these out:

  • DIY Seamless White Background for Product Shots
  • Tabletop Photography Walkthrough or How to Create an Eye-Catching Product Shot
  • Tabletop Photography Walkthrough or How to Create an Eye-Catching Product Shot Using 4 Simple Steps, you may learn how to photograph your product to increase your online sales. What is the best way to create simple seamless background product shots?

How to Use a Light Tent for Best Results

Light tents are miniature studios used by product photographers to capture their subjects. They are also referred to as light boxes or photo tents in some circles. Use a light tent to get product images that are clean and professional in appearance. Learn how to do that by reading this post!

Essential Equipment for Light Tent Product Photography

  • A light tent
  • A few sources of light (this isn’t essential if your light tent is equipped with lights)
  • And a few candles. Products include any type of camera. Tripod

How to Choose a High-Quality Light Tent for Fun and Easy Photoshoots

There are literally hundreds of picture tents available. Before you choose a lightweight tent, you should ask yourself a few important things.

Consider the Size of Your Products

Lightboxes are generally of the same form, however they are available in a variety of sizes. You want something that will allow you to move your merchandise around without being restricted. If you photograph flatlays on a regular basis, you may consider purchasing an even larger light tent. Flatlays are images shot directly above an item and arranged in a grid. Some photographic light boxes are so enormous that they can accommodate a person standing within them. If you frequently photograph large-scale items, you should also think about the size of the object you are photographing.

See also:  What Do You Need To Go Camping In A Tent

Do I Want the Light Box to Come with Lighting?

The majority of light boxes for photography come equipped with illumination and are reasonably priced. This lighting is generally sufficient for the majority of product photographs. The use of built-in lighting may save you a great deal of time and money. It also takes up no additional room because it is often contained within the box itself. It is, on the other hand, generally fixed in one location. If you want to have greater control over the situation, you should utilize your own lighting.

A light box and a lighting system are both available from some firms.

They are ideal for product photography projects that require a higher level of professionalism and flexibility.

Will I Need to Move the Light Tent Around a Lot?

Obviously, if you’re shooting product shots in a single place, you won’t have to consider this. If you are a frequent traveler, you may want to consider purchasing a folding light tent. Foldable light boxes are quick and simple to put together. You can even bring them around with you in your luggage! They are also often priced in the same ballpark as a normal light box as well.

Are There Any Additional Features I’d like the Light Tent to Have?

Light tents with extra openings for shooting flatlays are available on the market. These openings save time since they eliminate the need to flip your box around while taking shots from a high angle to capture the action. Others have come from a variety of different backgrounds. The normal backdrop colors are black and white, but you may also choose from green, yellow, or textured backgrounds if you want. In order to capture innovative product photographs, you must take into consideration the background.

Once you have determined which light tent is the greatest fit for your needs, follow these suggestions for taking amazing product photos:

Iron the Light Tent Fabric to Get Rid of Unflattering Wrinkles

If you have a light tent made of cloth, you must press or steam it before using it.

There’s a good chance that the light tent has some creases that will make your product shots appear quite unattractive. Also, make sure to clear off any dust so that your photographs appear as clean as possible.

Set up Your Studio Using a Table and Tripod

The fact that a light tent is compact and portable means that you can set it up practically anyplace. Place your light tent on a table or other flat surface. As a general rule, if you’re going to use natural light, place the table near a large window. Set up your camera on a tripod to capture the best images. Even if you’re shooting with a smartphone, a tripod is still recommended. This will guarantee that your photographs are as crisp as possible when you print them. It is also critical to have the greatest camera settings available.

  • In general, the lower the ISO setting, the less grain there will be in the final images. As long as you’re working in a well-lit environment, you won’t have to worry about using a high ISO setting. The aperture you use is determined by the aesthetic you want to achieve. In order to achieve a pleasing background blur, open up the aperture to a big value (for example, f/1.8). Make use of a narrow aperture (for example, a high f-number such as f/11) to capture every detail in your item. Shutter Speed: Some photographers employ a slow shutter speed to produce motion blur effects in their photographs. This effect isn’t essential for product photography because the lighting is so bright. It is important to have a quick shutter speed to minimize camera shaking. The speed of the camera should be increased if you wish to catch your merchandise in motion. RAW Mode: This is a feature that is present on the majority of professional digital cameras. It is preferable to JPG because it saves more picture data, which might be quite useful during post-processing operations. A RAW mode is also available on a large number of smartphone cameras. In order to have greater control over the quality of your photographs, download a manual camera application if you do not already have one.

Use Lighting to Make Your Product Photos Look Clean and Minimal

(If your light tent is equipped with its own illumination, you may skip this step.) However, while many product photographers employ artificial light to improve their photographs, doing so is not always required. Natural light may be used to produce excellent product photographs if they are taken in the proper conditions. A huge window is one of the most effective light sources. Place your light box next to it, making sure that no direct sunlight is shining on the product itself during the process.

If you see any strong shadows, you may eliminate them by lighting them with a flashlight or a torch.

Suzy Hazelwood’s photo was taken from Pexels and used with permission.

Take Photos fromUnusual Angles to Capture the Best Side of Your Product

There are precise standards for standard product photography. Your photographs for an Amazon business must be simple yet visually attractive if you want them to be successful. If you are able to be a bit more adaptable, you can experiment with other perspectives. Unusual perspectives can help your product photography stand out from the crowd and are a terrific method to demonstrate your originality to potential clients and customers. Don’t be scared to move your items about the store floor. Extra light tent area comes in helpful in this situation.

Although you may not end up with ideal product photographs as a result of this activity, it will undoubtedly improve your creative eye.

Use Different Backgrounds to Change the Mood for Eye-Catching Photos

When it comes to your photography, the color of your background has a significant impact on the mood. The colors black and white are the most frequently used in product photography. White is a simple color that is easy to look at and is simplistic. Photographs of white objects taken against white backgrounds are possible to capture. The visual appeal of the white-on-white effect cannot be overstated. Black is a more melancholy color. It has the potential to make your product appear mysterious and seductive.

Simple colors such as orange, green, and blue can also be used to make a statement.

In case you’re interested in experimenting with alternative designs, they might be really useful!

Some of the backdrops have texture to them. They’re typically straightforward, but they all have a distinctive element that distinguishes them from the standard backdrop colors. These are also excellent for creating gloomy product images.

Invest in Tools to Elevate Your Product Photography

There are several equipment and extras that may be used in conjunction with a light tent to make your light tent experience even more enjoyable.

  • When photographing from a distance, you will benefit from using a remote control. All that is required is that you push the shutter button on the remote. This is excellent for preventing camera shaking. If your gadget does not allow remote controls, you can utilize a timer to accomplish your goal. Flexible tripod: You may wrap this around any pole to take shots from a unique viewpoint when photographing landscapes. Flexible tripods may be compact and portable, making them an excellent tool for product photography that is both creative and unique. Gel filter: A gel filter is a transparent filter that may be attached to any light source to provide additional illumination. You may use any color to create lovely atmospheres
  • There are no restrictions. Self-made platforms: This might be anything as basic as a box. Using this technique, you can easily make smaller things stand out if you’re photographing many products in a single light tent. To design your photoshoots, you may also make use of platforms.

Photograph by Anton Gofman, courtesy of Pexels.

Common Light Tent Questions

Some light tents are equipped with high-quality professional lights. All that is required is that you switch them on and select the intensity level. Some light tents are just boxes that require artificial or natural illumination to function properly. Professional product photography necessitates the use of many light sources coming from various directions.

What Is the Best Photo Light Box?

Foldio is one of the greatest picture light boxes available on the market. The most affordable model costs less than $30 and has built-in LED lights. Because the box is collapsible, it’s ideal for product photographers who need to move around frequently. Excellent light tent choices may be found on eBay and Amazon, as well as other online retailers.

What Is a Photo Light Box?

A picture lightbox may be thought of as a little studio for product photography. Backgrounds for lightboxes are often white or black in color. You may use them to capture both simple and professional photographs of various items and subjects.

How Do You Take Professional Pictures of Objects?

When taking professional photographs of items, you might make use of a light tent. All that is required of you is to place your merchandise in the light tent. If the light tent is equipped with its own lighting, the process will be much simplified. Turn on the lights, set up your camera on a tripod, and start shooting right away! Photograph by Shiny Diamond, courtesy of Pexels


If you often photograph products, you may find that employing a light tent is beneficial. The wonderful thing about the light tent industry is that it provides a wide range of instruments for product photographers to choose from. It is possible that you will be able to discover a light tent that matches your demands, regardless of your budget or creative tastes.



1.How to Use a Light Tent for Small Product Photography

Standard setup for light tent photography is to arrange the tent on a table or end table, with the light sources on either side of the tent squarely opposite each other(1). What is the best way to take professional photographs of objects? When taking professional photographs of items, you might make use of a light tent. All you have to do is place your merchandise in the container. How to Select a High-Quality Product Frequently Asked Questions about Light Tents(2). 30th of June, 2019 — By focusing one light on one side of the lightbox, we may cast more shadows on the opposite side, giving the image a three-dimensional appearance.

2.DIY Light Box: Improve Your Product Photography – Jimdo

Instructions on how to shoot product shots using a homemade lightbox — It is also called as a white box or light tent, and it is an empty box with translucent(4) material on the inside. 14th of September, 2018 — If your items are enormous or if you intend to include people in your photographs, you will require large lights and reflectors, as well as a large background fabric.

However, if you have a small(5). What is the best way to utilize a lightbox for photography? To begin, you must utilize one to three lights to build up your setup. Place your product in the lightbox and then position two lights on either side of the (6).

3.The Pros and Cons of Light Tents | Are they Worth it?

Light tents are frequently used in product photography for eBay and other e-commerce listings because they make it so simple to take product images against a white backdrop. I’ll use the number seven as an example. 28th of December, 2018 — How to prepare for a product photography session. Photographing a handbag with the hypop studio buddy light tent is done by a lady. As a result of light tent kits being completely(8).

4.How to Use a Light Tent for Small Product Photography | Light …

15th of March, 2014 – How to Use a Light Tent for Product Photography of Small Items Learn the principles of photographing with a light tent, which will assist you in capturing bright, well-lit images. (9)… May 20, 2019 — What Is Lightbox Photography and How Do I Use It? In order to ensure appropriate alignment, place your object in the center of the Lightbox. Next, choose the angle at which you(10). 27th of March, 2020 — Are you photographing a still-life or selling something on eBay? For even lighting and a clean backdrop, you may make your own light tent out of an old box.

See also:  How To Set Up A Tent On A Platform

Lighting is an important part of creating photographs that stand out(12).

5.An End-to-End Guide to Light Boxes for Product Photography …

6th of August, 2012 — A bottle will be photographed in a lightbox, as planned. I’m not sure what size to acquire, or, to put it another way, what is the link between the size of(14) and the size of. 18th of March, 2016 — It is possible to take photographs using a light tent, which is a contrivance with translucent sides that diffuses light coming from various sources. As a result, your image is nearly(15). The following is a step-by-step guide for DIY white backdrop product photography to help you raise your sales.


6.It’s The Lighting Not The Camera – Arqspin

Setting up a good lighting setup for taking product photographs The primary disadvantage of employing a light tent is that they scatter a great deal of light across the inside, which may result in a(17). 6 days have passed since — Do you require a lightbox to boost the quality of your product and studio photography? The brand’s simplicity of use has led many photographers returning to it again and time again(18). This DIY photography technique may significantly improve the quality of your product photographs!

It doesn’t matter if you buy this epic(19).

7.How to Use a Light Tent for Photography? – Travel Guide

Mini studios for product photography are provided by the light tents. They are also referred to as lightboxes or photography tents in some circles. How to Choose a Tent | How to Set Up a Lightweight Tent The(21)… Use (22) to construct a DIY light box for product photography instead of purchasing one. To make a lightbox for photography that will last for a long amount of time, use (22). The Aureday Neewer Photo Studio Light Box is a portable photo studio light box with lights for product and food photography.

The Aureday Neewer Photo Studio Light Box is 20″ by 20″ and has adjustable lights. Make use of a USB power adaptor or power bank to turn on the led light box and other products. Rating: 4.4 out of 5 based on 8,263 reviews(23).

8.32 Light tents ideas | diy photography, photography tips …

How to Use a Light Tent for Product Photography on a Small Scale Learn the principles of photography with a light tent, which will assist you in capturing bright, high-quality images(24). 20th of March, 2021 — A decent lightbox may make a significant difference in the quality of your product photography. Lighting Tent with Neewer Studio Light Box, 20″ x 20″ Neewer Photo Studio Light Box with Neewer Lighting Tent with However, it folds down quite compactly when not in use, making it easy to transport(25).

Lighting provided by the sun.

When working with a limited budget, natural light should be utilized.

9.Product Photography Lighting and Best Practices …

Understand the fundamentals of product photography lighting, as well as recommended practices that can help you succeed. A seamless backdrop, or a tabletop light tent, will completely transform a white background into something else. While they provide level, consistent lighting in a studio, they do not provide a great deal of light (27). — Light Tent for Photography on January 28, 2021 — We’ve compiled a list of nine incredible light tents. These picture tents are extremely significant in product photography because they allow the goods to stand out.

10.DIY Natural Lighting for Product Photography: 6 Steps to …

9th of August, 2019 — A photography studio and all of the equipment necessary to capture quality product images are unlikely to be available for most retailers (28), and this is especially true for ecommerce merchants. The 19th of February, 2014 — Putting Your Light Tent to Use. During the day, you may utilize your light tent to filter incoming sunlight and reduce harsh shadows from the scene. Simply set your light(30) in the appropriate location. 22nd of December, 2012 — Thing photographers use them frequently because they are a convenient method to capture several images of the same product with a consistent(31).

  1. A light tent is a light box with permeable sides that allow light to scatter(32).
  2. 26th of June, 2019 — The Photon is a product photography “light tent” that has been modernized for the twenty-first century.
  3. Furthermore, you may always utilize a ColorChecker to assist you in compensating if(34).
  4. On September 24, 2020, Iconasys answered the question.
  5. There are two methods to make advantage of a light tent.
  6. Take your tent with you.
  7. Calculate the size of the lightbox you’ll require — For product photography, it is also important to remember to take(37).

if you want to utilize a lightbox. Even if your camera is the most expensive in the world, if your photography lighting is inadequate, you should consider building a lightbox or softbox to serve as a diffuser for your product photography. (38)…

Excerpt Links

(1). How to Use a Light Tent for Product Photography on a Small Scale (2). How to Get the Best Results When Using a Light Tent | Product Photography (3). Product Photography Cheat Sheet: How to Use a Light Box for Proper Lighting (4). DIY Product Photography Light Box: Improve Your Product Photography – Jimdo (5). How to utilize a lightbox and how to set up your lighting – GoDaddy Blog (6). Ten of the best light boxes, as well as instructions on how to lightbox photographically (7). The Advantages and Disadvantages of Light Tents |

  • (8).
  • (9).
  • Light Tent Tutorial |
  • (10).
  • (11).
  • (12).
  • The Light Tent Mini Studio on a Tabletop |

A Step-by-Step Guide to Using Light Boxes in Product Photography.

When to Use Light Tents for Small Products and How to Use Them.

The Complete Guide to Product Photography with a White Background (17).

Lifewire has compiled a list of the top seven photo light boxes for 2021.

Learn how to make and use a Do-It-Yourself Soft Lightbox from the professionals at Pixelz (20).

How to Make Use of a Light Tent for Photographic Purposes – Travel Tips (22).

FixThePhoto (23).Upgrade Emart 14″ x 16″ Photography Table with.

Photography techniques, diy photography, and 32 creative light tent ideas.

Improve your photography skills with the best photography lightbox.

5 Product Photography Tips You Must Follow (That Cost Less Than $50) (27).




Increase the Quality of Your Photographic Work (31).

PhotolisticLife (32).


The Photon is a “light tent” for product photography that has been upgraded for.

Is it necessary to utilize a light box when photographing products.

Simple Tips for Taking Great Product Photographs |

THE BEST PHOTO LIGHT BOXES [Light Box Kits For Product Photography].

The Best Way to Light Your Product Photos Like a Professional

Cheat Sheet: How to Use a Light Box for Product Photography

When utilizing a lightbox, it is critical to have adequate lighting. With the help of this cheat sheet, you may learn how to do it correctly. When it comes to product photography or taking still life photographs, a lightbox will assist you in getting the job done correctly the first time. However, if you’re new to the game, one of the first things you’ll need to learn is how to use adequate lighting. Fortunately, we discovered a cheat sheet from Pare and Focus(link is no longer accessible) that should make things a lot easier for you to understand.

  1. If you want to pursue a career in commercial photography, it’s critical that you become proficient with one.
  2. Once you’ve completed this step, go to the infographic below for guidance on how to begin the shooting process.
  3. The use of small fluorescent or LED light bulbs is recommended by the cheat sheet.
  4. Also, avoid combining different types of light bulbs because this will result in uneven and inconsistent lighting.
  5. By focusing one light on one side of the lightbox, we may cast more shadows on the opposite side, giving the image a three-dimensional appearance.
  6. However, if we play around with the angle of the lights, we may still create some shadows that will maintain the 3D aspect of the subject in question.
  7. On the day of your shoot, experiment with a variety of lighting approaches to find which one best matches your subject.
  8. To get a clean, bright appearance for product photographs, use Exposure Compensation to increase the exposure by one or two stops.

It is also advised to use custom white balance to ensure that the light is appropriately matched. On Reddit, an infographic was discovered.

Stage 3: Using a Light Tent

Using a tripod as inStage 2is important to getting sharp and detailed pictures of LEGOs.However, the tricky part of using a tripod is managing the lighting.Even with three or more external lights, trying to reduce dark areas,over-bright areas, and shadows can be tricky and tedious because theresults will vary a lot depending on the lights you use and the shape ofyour robot.In addition, getting the white balance right can betricky when using external lights mixed with room lighting.The ultimate solution to these problems, and the way toget fully professional results, is to use a light tent, such as theEZcube.The nylon materialdiffuses the lighting from external lights so that the light is welldistributed evenly around the model and shadows are greatly reduced andsoftened.The models onnxtprograms.comare taken using the30″ EZcube,which is a good size for most LEGO robots, and the product convenientlyfolds up into a small pouch when you are not using it.Ifyou get a light tent, you will also find it a convenient way to takeexcellent photos of any small “still life” objects for various reasonssuch as selling on eBay, etc.
Choosing a Background

When utilizing a lightbox, proper lighting is essential. Utilize this cheat sheet to learn how to do it correctly. When it comes to product photography or taking still life photographs, a lightbox will assist you in getting the job done correctly the first time and efficiently. To the contrary, if you’re new to the game, one of the most important things to learn is how to use good lighting. Fortunately, we discovered a cheat sheet from Pare and Focus(link is no longer accessible) that should make things a lot easier for you to understand.

  1. In order to pursue a career in commercial photography, you must become proficient with one.
  2. Once you’ve completed this step, follow the instructions in the infographic below to begin the shooting process.
  3. Use of compact fluorescent or LED light bulbs is recommended by the cheat sheet.
  4. Also, avoid combining different types of light bulbs because this will result in uneven and inconsistent lighting results in your home.
  5. By focusing one light on one side of the lightbox, we can create more shadows on the other side, which gives the image a 3D appearance and makes the image appear more realistic.
  6. In spite of this, we can still get some shadows by experimenting with different lighting angles and thus keep the subject’s 3D appearance.
  7. While shooting, try out different lighting techniques to see which one works best for your subject.
  8. Experiment with Exposure Compensation to add one or two stops to your product shots for a clean, bright appearance.
  9. It is also recommended to use a custom white balance to more accurately match the light.
Getting the Best Lighting
Although you can use any lighting with a light tent (evenjust the camera’s flash will produce better results if allowed toreflect inside the tent), the best results will be obtained by usingthree external lights withdaylightflorescent bulbs.This will ensure strong, even lighting, anda perfect “white balance” that you won’t need to adjust afterwards.This whole setup can be boughthereas a convenient kit, but you could also use your own lights.Usingthis kit, you should place the two main lights directly on either sideof the light tent.For LEGO robots and parts, I suggest normallyplacing the third accent light in front down low (on its stand withoutthe boom), with the EZcube’s small round storage pouch placed over it todiffuse it, as shown below.EZcube Light Tent with three external lightsYou can also position or hold the third accent lightwherever you want to get more light in certain areas for specialsituations.Finally, to get a perfect and consistent white balancewith this setup, you should turn off the room lights and draw the shadesto eliminate other light sources.An example of what happens ifyou forget this can be found in inBuilding Step 17 of theCar with Game Controller Project, where I added a picture afterwardsas an intermediate step but forgot to turn off the room lights.

Digital Photography How-To: Building a Light Tent

Perhaps you’re looking to photograph a timepiece for an online auction. Alternatively, you might take a photograph of your wedding band for insurance purposes. Alternatively, you may obtain a picture of an old coin. There will be times when you’ll need to shoot something that is tiny, glossy, and difficult to image in any of these scenarios. Often, people hire specialists to photograph these reflecting items, but there’s no reason why you can’t do it yourself with your digital camera instead of paying a professional.

In this post, we’ll teach you how to create your own light tent to use for shooting tiny, reflective things such as jewelry, and how to achieve excellent results.

Following that, we’ll talk about how to light your object such that its inherent glitter is brought out while preventing reflections. Finally, we’ll set up our camera and take some measures to ensure that the image is as clear as possible and that we get the greatest picture possible.

Know your Goals

Understanding the purpose of a photography session is one of the most critical components of any photographic endeavor. When photographing shiny, little things, you must carefully examine each piece and decide which characteristics you want to capture in the shot. Being aware of whether you want to accentuate the sparkling highlights of a diamond or the smooth texture of an old silver pin can help you make more informed decisions about lighting placement, background color and texture, and the camera position.

Take your Camera Camping

Our primary purpose in writing this post is to demonstrate how you can make your shiny goods appear fantastic without having to hire a professional photographer or take out a small business loan to do so. Although you could just place the object on your desk and take a picture, as we did for the first image in Figure 1, this method is fraught with difficulties. Our item is poorly represented by the photograph due to the use of a flash, the use of mixed illumination from fluorescent overhead lights, a distracting background, and strange shadows.

  • More information is available below the jump!
  • Members who are free or Premium will see less advertisements!
  • Figure 1 shows a diagram of a compass.
  • If we adjust our shooting technique, it shouldn’t be difficult to make this shot better.
  • Alight tent is an enclosed space constructed of a transparent material that emits uniform, diffused light throughout the space.
  • The hard designs make use of a variety of materials to disperse and reflect light, including cardboard boxes, translucent plastic sheets, white foam, and other similar materials.
  • Small light tent setups are available for purchase from professional camera supply firms, and they perform well.
  • When shooting goods such as jewelry, the most difficult difficulty is reducing reflections; thus, creating your own setup allows you to respond more effectively to the subtleties of your subject.

A light tent may be constructed in a variety of configurations, which we will demonstrate in the following section of this article. To keep things simple for now, we’ll skip over the lighting setups and camera settings, but we’ll get to them later in the article.

The Fast-and-Cheap Method

Nothing more than your camera, some tape, and a handful of face tissues are required for the first light tent setup we’ll put together. Placing your object on a white piece of paper will offer a neutral backdrop and help to reduce reflections. Set your camera up on a tripod to limit camera movement, and then set your object on the white sheet of paper to create a neutral background and help to reduce reflections. In the next step, place your camera over the object and wrap tissue around the lens to create a tent over the object, as illustrated in Figure 2.

  1. Because it creates a basic, seamless habitat that diffuses light properly while costing pennies to construct, this simple “soft” light tent works very well for little things.
  2. This might result in fuzzy photographs when taken with digital cameras that do not include a macro lens.
  3. The thicker cloth aids in evenly diffusing the light, while the larger size allows for larger items and better adaptability in the setting.
  4. Diffusing the light and altering the backdrop of our photo has resulted in a more pleasing image.

A More-Flexible Setup

After you’ve set up your light tent, you’ll most likely be able to use it for many years to come, so why not take your time and do it well the first time? The framework of this next light tent is provided by a cardboard box, and the diffusing agent is comprised of a variety of materials. The light tent in Figure 4 is large enough to accommodate larger items and can be simply adjusted to fulfill the requirements of a variety of different pictures. This form of light tent requires some creativity and improvisation because it may be constructed from a variety of different household items, such as books or stuffed animals.

  • The holes were then covered with white pillowcases that were sealed with duct tape.
  • In addition to creating a seamless background, this guarantees that any reflections from the interior of the box are completely white as well.
  • The entire operation took around 20 minutes, and we now have a multipurpose light tent that can be used for a variety of activities.
  • Figure 4: The essential components of this adaptable light tent are a cardboard box, a pillowcase, and a white rubbish bag in plain sight.

Figure 5: The bigger size of our diffuser materials allows for more uniform light distribution, and the white interior creates less reflections than other types of materials.

Keep your Eyes Open

Almost anything that is transparent may be used to create a light tent for a party. Look for possibilities to use other things as fast light tents when you are out and about. The paint can liner illustrated in Figure 6 is an example of something we discovered at our local hardware shop. This product is ideal for use as a light tent since the semi-transparent material diffuses light while the curved top produces an aesthetically pleasing ambience. Furthermore, it is long-lasting and should be accessible for a number of sessions.

Figure 6: This translucent paint can liner was used to create a one-of-a-kind light tent.

Figure 7:

Lighting your Object

Once your light tent has been constructed, you may concentrate on providing appropriate illumination for your object of interest. Our attempt to keep costs down by doing things yourself will continue with the use of natural light rather than studio lighting. They are often constructed of tungsten or quartz and provide a brilliant, well-balanced light that is quite expensive to purchase. These lights, on the other hand, would be far too bright for our installations, since the 500-watt infernos would be overwhelmed by the modest size of our things.

  • Note:Many photographers swear by the natural lighting provided by a bright, overcast day, and for good reason.
  • Our lights are held in place by simple clamp reflectors, which we purchased for $5 apiece from the local hardware shop.
  • Using only one light would result in an excessive amount of contrast on one side of the item and an uneven distribution of lighting.
  • We’ve also opted to raise one of our lights higher than the other in order to alter the angle of the incoming light and create soft shadows in the process.
  • It should be noted that they have been set at different levels in order to modify the light angles.

Why not use the flash?

In order to illuminate a big area equally, the flash on your digital camera is designed to be powerful. When dealing with close-up photography, the brilliant burst from the flash will overpower your subject, resulting in hotspots and reflections on the surface of the item.

Furthermore, including a second light source in your photo might have a negative impact on the color balance of your image. The best course of action is to switch off your flash and rely on external illumination instead.

Balancing the white

One advantage of photographing these artifacts digitally is that you have the ability to modify the white balance on your camera to your liking. The color cast produced by each form of light is different; thus, you need alter your camera’s settings to match the type of light you’re utilizing. Avoid utilizing fluorescent illumination, on the other hand, because it has a tendency to convert metal a bluish green color. It’s true that, because all of your photos are digital, you can always import them into an image-editing tool and fix any color casts after the fact, but it’s ideal to make this correction while you’re shooting if at all feasible.

Setting up your Camera

Now that your light tent and lighting fixtures are in place, you can focus on setting up your camera to get the finest possible photo. The first thing you need to figure out is what the focal range of your camera is. You’re going to want to fill the frame with your subject, so come as near as you possibly can without risking fuzzy pictures in your photograph. If necessary, you can visually zoom in on the item; however, digital zoom should be avoided because it reduces the quality of the image.

  • Check with the manufacturer to determine if the lens is compatible with a macro lens attachment that you may purchase separately.
  • It has already been noted that a tripod is recommended for taking stable pictures with your camera.
  • Especially at close range, even the tiniest vibration may be quite perceptible.
  • In general, you’ll want to shoot with the greatest f-stop you can find, since this will result in a narrower aperture and a greater depth of focus than using a smaller one.
  • You may also want to bracket your images by +/- 1.0 EV in order to have a variety of shots to choose from when editing.
  • The view from the rear panel will provide you with the most exact depiction of what the image sensor is going to capture, as well as a good indication of whether or not the item is in focus, whether or not the colors are true, and whether or not reflections are present.

Preparing the Object

It is important that your things are clean and free of fingerprints before photographing them. Handle them only if absolutely essential while wearing gloves to reduce the likelihood of smudges. For objects that are highly reflective, you might want to consider applying a dulling spray to lessen the amount of reflection you get. A simple and inexpensive method of achieving the similar effect is to place your thing in the freezer for a few minutes. When you remove it, a little layer of condensation accumulates on the surface, which somewhat dulls the appearance of the surface.

When composing your photo, take into consideration the color and texture of the subject.

Consider that a white gold and diamond ring will likely seem better against a gray backdrop than against a white background, since the highlights will be more visible and the reflections will be slightly deeper against a gray background.

The presence of bad shadows detracts from your item and causes hard edges, which makes your image appear flat.

Get it off the ground as soon as possible to give your thing the most amount of dimension feasible. Some inventive rigging may be required, or you may purchase positioning clips, such as those used by anglers for fly tying, to hold things in place while they are being rigged.

Shooting your Object

Once you’ve put everything together, you can start shooting. Because you’re shooting digitally, you should capture as many shots as you can. Always remember that it is always easier to delete an unwanted image afterwards rather than having to re-set the photo. While you should fill your frame with the item, you should also include any shadows thrown by the object. Make every effort to shoot at the greatest resolution feasible, even if the end destination for these photographs is the Internet.

Experiment with different lighting and camera angles to see what works best for you.

Keep in mind, however, that your lens may also generate a reflection on your subject, so keep a watch out for any adverse manifestations while using your lens.

Our favorite photograph, which can be seen in Figure 1 and below, was taken with the lampshade light tent, which was a complete surprise to us.

Shooting tiny, reflective items doesn’t have to be difficult if you put in the effort to set up a favorable lighting arrangement that reduces reflections and allows your subject to shine through.

Leave a Comment

Your email address will not be published. Required fields are marked *