DIY Attic Tent Installation
Uninsulated and leaking attic openings are one of the most prevalent insulation issues that homeowners have in their houses, according to the National Insulation Association. Homeowners have attempted to remedy the situation in part by insulating the space around the attic door. Unfortunately, they are not producing an airtight seal in the process of doing this action. Every time the door is opened, this practice releases dangerous airborne particles of dust and fiberglass into the atmosphere.
Essentially, the attic tent works by closing and insulating the attic entrance in a way that makes it quite simple to operate.
Measuring Your Attic Door
Before you can construct the attic tent, you must first determine the size of your attic entrance. Attic tents are available in a variety of sizes, and the size that is best for you will be determined by the type of attic access in your home. In the event that you have attic steps that draw down from the ceiling, you should consider the stair rails that rest on top of the attic floor while the door is closed. In order to ensure a proper seal, these rails will need to be able to fit inside the attic tent when it is folded up.
- The installation of an attic tent for this sort of opening is a little different than for other types of openings since it will be mounted vertically to the walls rather than horizontally to the floor.
- When it comes to measuring for an attic tent, scuttle hole entrances require a little extra thought.
- In order to fit the panel that will be on the attic floor when the scuttle hole entry is opened, your attic tent for a scuttle hole entrance will need to be substantially larger than simply the aperture.
- Measure the interior width and length of the preliminary frame for the attic opening on the inside and outside of the house.
- There is a 2″-3″ margin of error in this estimate.
Attic Tent Installation
The installation procedure itself is straightforward, and it takes only 10 to 15 minutes to complete.
- It is necessary to use staples (3/8″ and 1/2″ staples work best) to hold attic tents in place in order to maintain a continuous connection between their skirt and the doorway opening. Remember to take into consideration any uneven patches on your decking. In order to ensure that the zippers of the attic tent are easily accessible while the attic door is open, they should be located on either the stairway or floor side of the tent (or near the entrance for scuttle holes). If there are too many impediments and you are unable to follow the curve of the opening adequately, you can staple on the inside of the framing to secure the aperture in place. Extra material will accumulate in the corners of the attic tent as a result of this. Make certain that the content is stapled as well. Begin by stapling the corners of the skirt together, then staple the centre of each side of the skirt together. The bottom skirt should be folded beneath the zipper and stapled to the ground for vertical doors. If everything appears to be in order, you can proceed with the stapling every 2 inches as needed. If, on the other hand, a problem arises, don’t be concerned
- You can just unstaple the tent and begin over. It’s time to make the attic tent airtight now that it’s been attached. Caulk the tent to the structure with a high-quality silicone caulk to keep water out. In order to do this, you must caulk between the skirt of the attic tent and the framing, squeezing a continuous bead throughout. After that, you’ll want to carefully push the skirt to establish a continuous closure.
That’s all there is to it! It’s a really straightforward procedure.
Is DIY right for you?
If you’re not interested in doing things yourself or if you believe that your particular attic door configuration will be problematic, you may skip this step and hire a professional to install the attic tent for you.
9 Tricks for Growing in the Loft or Attic
The shop will not function properly if cookies are deactivated on your computer or device.
9 Tricks for Growing in the Loft or Attic
Are you considering growing in a loft or attic? The good news is that it is possible. All you have to do now is make a few wise decisions. Here are nine tips to keep in mind while putting together a loft grow room.
1. Insulate, insulate, insulate
Lofts aren’t often insulated, which is a good thing. Winters are freezing, while summers are scorchingly hot. This makes it more difficult to maintain control of your climate. It is necessary to insulate the building initially. Insulation boards such as Kingspan Insulation Boards are ideal for use in attic grow rooms to keep the temperature stable. Insulate your tent instead of the room if you aren’t going to insulate the room.
2. Draw air in from another room in your home
The temperature of the air coming from inside your home is closer to your goal temperature. In the summer, it is colder, while in the winter, it is warmer (than the air in your loft). It’s also higher in carbon dioxide (CO2), which we exhale when we breathe.
3. Extract air to oudoors through your eaves
It is not permissible to take air from the room where your tent is located. If you do, it may be sucked back into your tent as intake air, which might cause it to overheat. You have a strong desire to withdraw to an outside spot. Obviously, this is something you should be doing anyhow, but it becomes even more critical while growing in a loft. It’s difficult to get large pieces of equipment in and out of a grow area in the attic. As a result, wherever feasible, choose items that can be expanded, collapsed, or folded.
RhizoPots are also very useful, and for all of the same reasons as above!
5. Pick a quiet, low maintenance system
The last thing you want is a system that is too loud and that you have to constantly check. AutoPots are excellent since they are passive and silent. Spills are a source of frustration in every grow environment. Getting things organized in lofts and attics, on the other hand, is more difficult. Make sure to utilize catchment trays and saucers to be on the safe side while cleaning. Make an effort to select a system that you are confident will not leak.
7. Use loft shaped grow tents
In order to maximize height, choose a tent with a slanted roof as well. You may use a regular flat roof tent, but you’ll lose some height in the process. This creates a problem when it comes to maintaining a safe distance between your canopy and lights. A BAY6 Loft Grow Tent or a BudBox Roof Tent are both excellent options for this situation.
In a loft tent
Attic roofs are slanted; thus, to maximize height, choose a tent with a sloped roof as well. You may use a conventional flat roof tent, but you will lose some height. Try using a BAY6 Loft Grow Tent or BudBox Roof Tent to ensure a safe distance between your canopy and lights when this happens. They’re the perfect fit for your growing needs.
In a low-ceiling tent
Make sure to use a low-profile light that doesn’t produce a lot of heat while growing in confined locations. This will make it easy to maintain a safe distance between your plants and your canopy layer during the summer. An LED, CFL, or air-cooled light such as a Telos LED, for example, would be excellent.
9. Pay close attention to your temperature
In an attic, your temperature might fluctuate dramatically, with sharp spikes and unexpected decreases. It’s more difficult to maintain a consistent climate. You definitely want to regulate your climate in order to counteract this. Spend your money on high-quality fan speed controls. Thermostatic controls should be used for heaters. In this case, good controllers are well worth the price.
Keith Keith is responsible for the care of our inventory and employees. He’s a little bit of a hippy, and he’s a big fan of chilies. If you want to know how to cultivate them, you should ask Keith. Ordering Information: 0333 003 22 96 ElasticSuite is used to power the search engine.
Question: How To Build A Attic Tent Out Of Styrofoam
The installation of an Attic Tent to your house may out to be considerably more advantageous than you initially anticipated. Not only does it serve to provide a barrier between your attic area and your living space, but it may also aid in the prevention of insulation particles from seeping into your house.
How do you insulate attic stairs?
Check to verify that the attic stairs close firmly before applying self-adhesive foam weather stripping around the perimeter of the plywood door where it meets the frame, excluding the hinge end, as shown in the photo. Having sealed the gap, it is possible to insulate it even more by constructing a foam box in the attic to surround the stairwell.
Should I insulate my attic stairs?
The attic access stairs in many homes that are inadequately insulated and leaking present a chance to improve comfort while also saving energy and money. It is possible to air seal and insulate the aperture for the attic stairs by either creating your own insulated cover box from scratch or purchasing a kit or pre-built box.
How do I keep my attic stairs closed?
Pull-down attic stairs are supported by coil springs on either side of the unit. The springs are connected to power arms at the top of the stairwell and are responsible for keeping the door closed and level with the ceiling. When the stairs are older, the spring tension might weaken, resulting in the stairs not closing entirely.
Whats an attic tent?
With the Attic Tent, you can establish an air transfer barrier between your attic and your living rooms. It is a highly developed, patented insulator that is easy to install. It is a practical and cost-effective solution to an issue that has existed since the beginning of the construction of homes with above attic openings.
How can I make my attic open bigger?
It’s a really simple procedure to follow. All you have to do now is chop additional drywall out of the way. You could absolutely install a larger access point in the same manner in which the initial access point was installed, if necessary. Simply cut the drywall back along the joists in the ceiling.
How much heat is lost through the attic?
When it comes to heat loss, the attic can account for as much as 85 percent of the total. As a matter of fact, according to the United States Department of Energy, increasing attic insulation can reduce heating expenditures by 10 to 50 percent (depending on the current level of insulation).
How do you measure an attic tent?
Simple Ways to Weatherize Your Home: How to Select the Proper Attic Size Calculate the width of your attic door across the top (usually 22- to 30-inches). Measure the width of the attic door (which is normally 54′′ to 60′′ wide) across the top. It is important to note that if your attic has the standard triple-fold staircase, you should measure the height of the staircase when folded (which is normally 7′ to 13′ in height).
How do you air seal a house?
Air Leaks: How to Prevent Them Check the air tightness of your house. Air leaks around doors and windows should be sealed with caulk and weatherstripping. Affix caulk and seal any air leaks that occur when plumbing, ducting, or electrical wire passes through walls, floors, ceilings, or soffits over cabinets.
Caulk and seal any air leaks that occur where plumbing, ducting, or electrical wiring passes through walls, floors. Wall-mounted outlet and switch plates should have foam gaskets installed behind them.
How do you insulate a walk in attic door?
Here’s an example of a successful strategy. Long lengths of duct tape (sticky side up) should be stapled to the inside of the attic scuttle door. After that, stuff it with insulation batting to make a cushion and wrap it like a birthday present, as seen in the picture. Apply foam insulation tape around the circumference of the access hole, where it sits, to seal the perimeter where it rests.
What is attic tent?
The Attic Tent TM is the most advanced attic access insulating cover that has ever been created (attic stairs, scuttle holes, knee-wall doors, and full-size doors.) When it comes to energy efficiency, its major function is to prevent air infiltration between the home and attic, which is the most prevalent source of wasted domestic energy during both the hot and cold seasons.
What is the opening to the attic called?
All right, let’s take a second or two to go through everything again. A scuttle attic is a type of attic area that may be accessible through a tiny hole in the roof. A hatch is the term used to describe the hole and the panel that covers it.
Do attic door covers work?
When correctly placed, an attic hatch cover will keep the undesired warm or cold air from your attic from escaping up into the living space below. Moreover, the air you’re spending money on each month to either cool or heat will remain in your living space rather than traveling up to your attic as readily.
How much does it cost to install attic ladder?
When it comes to installation of attic ladders or steps, the typical cost can range anywhere from $220 to $647, with a total cost of $445 (including materials). For a professional contractor, labor costs are on average $240 per job, based on an hourly rate of $60 per hour. An attic door kit, as well as finishing items like as trim and paint, are included in the price.
How do you seal an attic access panel?
Air seal attic access panels and drop-down stairs to keep air leakage to an absolute minimum. A gasket around attic access points will help to keep the air between the aperture and the panel covering from escaping. Replace the drop-down steps that offer access to the attic with a robust, insulated cover and seal the rim of the panel with an air-sealing gasket to keep out the cold air.
Can you cut ceiling joists for attic access?
If your ceiling contains joists, you can cut one or more of them to accommodate the installation of an attic fan, a pull-down ladder access, or another item of this nature. Installation of headers between neighboring joists in the ceiling frame is required when cutting joists in the ceiling frame.
What attic means?
(This is the first of three entries.) In the classical styles, a low storey or wall above the main order of a facade is known as a pilaster. 2: a chamber tucked up beneath an attic. The term “garret” refers to a chamber or area just below the roof of a building:
How do you insulate a tent?
The Best Way to Insulate a Tent for Winter Camping: 9 Pointers Bring the smallest tent you can find. Smaller is more comfortable. Insulation of the ground. To insulate the floor of your tent, you may use anything from a ground mat to a rug to a blanket (or even huge towels if you don’t have anything else).
Make a ruse of it. Breaks in the wind. Heat packs are a great way to keep warm. Sleeping Bag to keep you warm. Wear thermal underwear. Place a Thermal Blanket on top of the tent to keep it warm.
Installing an Attic Tent to Reduce Energy Loss at Home – Energy & Water Conservation Blog
When it comes to the air in your home’s living space, how often do you want the air from the attic to mingle with the air in the room where you’re sitting? Yes, unless your attic has been adequately vented and insulated, the answer is almost certainly “never.” Insulate the whole attic, which may be a time-consuming and expensive undertaking. Putting up an attic tent will help you avoid undesired air exchanges and energy waste that you encounter at home without breaking the bank this summer if a new roof is not in the budget this summer.
- Choosing the Appropriate Size We’ve all been there: you go out and buy a new outfit, only to discover that it’s either too big or too little for you.
- When it comes to selecting your attic tent, use the same logic.
- When the attic doorway is folded, measure the width, length, and height of the opening.
- If the attic ladder side rail is constructed of 14-gauge steel, a height of 7 inches is required.
- Installation The insulating cover for attic doors may be fitted over attic stairs, knee wall doors, and an attic scuttle hole, among other things.
- The attic tent should be placed at the end of the attic stair box. A hinge should be placed at the end of each zipper head. Staple the rough frame to the mounting hinge on all four sides (approximately every 2-3 inches along the length of the frame)
- Fill up any air leaks between the rough frame and the mounting flange with a bead of caulk and let it dry.
B) Knee-Wall Entrance
- To ensure proper alignment, the attic tent should be vertically aligned with the rear of the door frame. Make certain that the zipper end is pointing downward. The flange should be folded under the zipper side to be attached to the floor. Glue a bead of silicone caulk around the door frame on the attic side
- Staple around the door frame on the ground side.
C) Scuttle Hole in the Attic
- Create an access hole by attaching a piece of 1/2-inch plywood to the attic floor joist and connecting side of the access hole, for example, measuring 24′′x35′′. Other adjacent locations should be sealed to ensure that the tent has the necessary mounting surface. Positioning the insulating cover over the scuttle hole while keeping the zippers near to the access point is recommended. Pinch and staple the tent’s flange to the plywood and access structure to keep it in place
- Apply a bead of caulk to the joint for a more secure seal, just as you would with the other applications.
If you put in a little effort and use the correct tools, you can start reducing energy loss and protecting your home from the harsher temperatures found in the attic during colder months of the year. The additional insulation given by an attic tent will not only allow you to have greater control over the temperature within your home, but it will also cut your energy costs by up to $170 per year if you leave it in place.
Turn an Attic Into Playroom
Is it possible that you’ve experienced one of those inspirational moments as a parent that left you feeling determined in your decision to raise your children unplugged? After a few hours or days, you notice that the home is becoming extremely noisy and moving really quickly. There are toys all over the place, books tucked under the sofa, and blankets in the corner of the room that were used as a tent for exactly five minutes before the kids moved on to the next thing they wanted to play with.
Alternatively, an attic.
That is precisely what is happening here today, as we transform our attic into a delightful playroom for our children, taking use of the spacious area above our new garage.
Please have a look at this additional playlist we created to see what we’ve been up to since we finished the rest of this huge endeavor.
Step 1: Insulation and walls
The first step was to vent and insulate the truss ceiling of the garage, which we did with R30 Rockwool insulation to get things started. To accommodate our 19-inch center spacing, I quickly devised a cutting jig that allowed me to stand on it while using a 6-inch buck knife to cut the bricks down to size. It has been brought to my attention since then that an electric kitchen knife is also effective for the job, but I have not personally tested it. After the ceiling had been insulated, I moved on to the walls and cut out the temporary sheet rock that we needed to pass inspection, as well as starting to build a sort of knee wall against which a new wall could be properly bolted in place.
The first wall I made was on the ground and then elevated it to a higher level.
My college trig class helped me calculate out all the cut lengths for the second wall, which I then erected directly in place when it was complete.
Because the roof of the garage above was highly insulated, the floor was already well insulated.
Step 2: Drywall
My brother and I used construction glue and this wonderful collated screw driver to hang the sheetrock, which was 1/2 inch thick on the walls and 5/8 inch thick on the ceiling. While I understand that the ceiling should be completed first, I was exhausted and all of the sheet rock was transported into the attic with the half inch that was more accessible. Rather than moving everything out of the way, we just place everything on the wall first. After that, I did something VERY un-DIYTyler and contracted out the taping and mudding to professionals.
It was absolutely worth every cent.
Step 3: Paint, Fixtures, and Finishing touches
Using my Graco airless sprayer, we completed the mudroom’s finishing touches: primer and paint. Another thing we tried was some Rustoleum Blackboard paint on one wall so the kids could have their own giant chalkboard, which has proven to be a huge success with them! After installing a couple of doors, outlet covers, a ceiling fan to circulate air, and foam mats on the floor, this area was set for the big trial. It’s a huge hit with our children! In addition to serving as a rainy-day retreat, this structure will see even more use throughout the long Michigan winters.
We have been really amazed with how cold it has remained up there, despite the fact that summer temperatures have arrived. It has already paid off with all that insulation! I am certain that it will behave in the same manner when it is chilly outdoors, however we are very convinced that a ceramic or other flameless heat source will ultimately be required. We have a special baby monitor up there so that we can keep an eye (and ear) on what’s going on, but otherwise this space is exclusive for our children.
There will be no need for policing in the face of the inevitable chaos. Turn the volume down and keep the mess out of sight. Parents who are pleased with their children. Please follow and like us on Facebook:
Attic Tents Houston, TX
The amount of money you save will vary depending on where you live and how cold or hot it is. Thermal barriers are created by the attic tent, which prevents warm attic air from leaking into your living space. It has been shown to lessen air transfer and is a worthwhile investment for your house.
Why You Need an Attic Door Tent
In terms of insulation, attic door tents are among the most effective options available on the market today. By using the proper attic tent, you can quickly cover full-size doors, knee wall doors, scuttle holes, and attic stairs, so keeping the cold and gloom at bay and preventing it from seeping into the rest of your home. Tent insulation is also intended to prevent air from leaking into your home through the space between your attic and your home. You will save money on domestic energy costs throughout both the cold and hot seasons in this manner.
Get Tent Insulation Today
The entry points leading to your attic are a perpetual source of financial loss. Therefore, if you do not have an attic tent in Houston, Texas, you will wind up paying an excessive amount of money on your utility bills every single month. In the summer, these entrance points enable warm air to enter your home, while in the winter, they allow cold air to exit. As a result, there is a greater need for heating and air conditioning maintenance services.
Expert Attic Access Insulation Services
A protected attic door tent from Dave Lane’s Hi-Tech Mechanical will provide the necessary insulation around these points of entry. Your monthly utility expenditures will be significantly reduced thanks to the tent, and your house will be kept at the most comfortable temperature throughout the year as a result of its use. With rising energy expenses, it is critical that you take advantage of the professional attic access insulation services that Dave Lane’s Hi-Tech Mechanical provides.
Saving hundreds of dollars on your heating and cooling expenditures is possible with this incredible solution!
|The Attic Tent has multiple applications.It insulatesseals:Folding Attic Stairs Knee Wall Doors Attic Scuttle Holes Full-size Doors (Up to 35″ wide)|
For further information on Attic Tent size, please see ourAttic Tent – Sizingpage. Homeowners who have been aware of air transfer/loss through the attic have sought to solve the situation by installing insulation around the attic door opening over the course of several decades. Unfortunately, because this technique does not create an airtight barrier, only a small reduction in the amount of energy wasted and air loss may be obtained with this method. Every time the attic door is opened or closed, it releases dangerous airborne particles of dust and fiberglass into the atmosphere.
With the Attic Tent, you can establish an air transfer barrier between your attic and your living rooms. It is a highly developed, patented insulator that is easy to install. It is a practical and cost-effective solution to an issue that has existed since the beginning of the construction of homes with above attic openings. The source of the problem is wasted energy that is lost via and around the attic door and stair well. It’s almost impenetrable!
Attic Tent is the Solution!
From the standpoint of the homeowner, the experts at Attic Tent were able to tackle the problem of attic stair air transfer/loss. It was their goal to create a solution that not only dramatically lowers air leakage, hence significantly cutting your energy cost, but also allows for safe and simple zipper entrance into your attic. Each time you open your attic stair door, it keeps the blown insulation in the attic, where it belongs, rather than on your floor. Lightweight, long-lasting, and simple to assemble!
Between your home and the unconditioned air coming from your attic, there is just a quarter-inch sheet of plywood between you and the outside world.
In the event that your home has been adequately insulated, don’t forget to address the most common source of air incursion into your home.
If you have an air conditioning return within 10 feet of your attic draw down or a thermostat within 10 feet of your attic pull down, an attic tent is a requirement.
In close proximity to your attic (within 10 to 12 feet), the return may suck unconditioned air from your attic into your HVAC system, and your thermostat may be influenced by the temperature fluctuation and run more frequently, resulting in an imbalanced house.
- Reduces energy expenditures
- Saves money on heating and air conditioning
- Exclusive product that is not available for purchase in retail outlets
- It is insulated and has a built-in radiant barrier to reflect heat
- It is also fire resistant. Creates an airtight barrier, which reduces energy loss throughout the year. Insuring that air leaks are sealed and insulating the attic can help you save up to 20% on your home’s heating and cooling expenditures. Designated as a barrier between the attic and the living spaces to prevent the transfer or loss of air, dust or humidity, as well as insulation. Reduce the health hazards associated with attic dust. Heavy-duty zippers that are non-corrosive provide simple access to your attic. R-Value is 3.2
- Exceeds the requirements of the National Building Code
- ASTM E84-03
Some frequently asked questions include: How much money will I save? How long will I save? We really don’t like to say it, but it does come down to personal preference. The majority of the time, it is determined by where you reside. The potential for savings increases in direct proportion to how severe the weather changes. Our most recent attic tents are designed to prevent more than 75% of air transfer and should pay for themselves within the first year of ownership. Typically, there is a 7 to 10% reduction in energy use.
- The Attic Tents are constructed of “space-age” materials and have a tough exterior shell that can withstand the elements.
- What mechanism does it use to open and close?
- The tent’s zippers are designed to make opening and shutting the tent as simple as possible.
- The architectural ideas that make our attic tents so successful are the same concepts that are used in the construction of storm doors and windows as well.
- Is it simple to operate?
- The design doesn’t end there, though.
- Attic Tents are designed with an easy-to-use zipper accessibility to make accessing and departing your attic a simple process.
Maintenance Tips: Attic Tent Installation
The use of attic tents should be included in your notebook if you’re on the path to smart energy efficiency and you have an attic. The firm has a website. The following is a reasonable perspective on using this fixture, according to Attic Tent: Homeowners who have been aware of air transfer/loss through the attic have sought to solve the situation by installing insulation around the attic door opening over the course of several decades. Unfortunately, because this technique does not create an airtight barrier, only a small reduction in the amount of energy wasted and air loss may be obtained with this method.
This video by Atlanta-based KTM Energy Wise presents a highly rational and practical basis for comprehending one of the numerous forms — depending on the entry to the attic — of the attic tent, which can be found in various configurations.
Some online places to get an attic tent
- Attic Tent, Amazon, Home Depot, The Stairway Shop, The Energy Conscious, Climate Doctors, and many more are available.
Installation procedures for a stair attic tent
- The height of the attic stairs above the rough frame should be measured. This will tell you the height of the attic tent that is required. See the product’s size and installation information for further information. Measure the width and length of the rough frame from the inside. Make sure that the zipper heads of your attic tent are near the hinge end of the attic stair box so that they are easily accessible
- The mounting flange should be stapled to the rough frame on all four sides, about every 2 -3 inches. Caulk the joint between the mounting flange and the rough frame to prevent leakage.
Installation procedures for knee wall door
- Adjust the attic tent so that it is vertically aligned with the rear side of the entrance frame
- Make certain that the zipper end is pointing downward. To connect the flange to the floor, fold it under the zipper side. Put some caulk around the doorframe on the attic side of the house and staple it in place.
Depending on how your attic access has been constructed, you may be able to utilize additional types of attic tents in addition to the ones listed above. Before placing your purchase for your attic tent, double-check that you have chosen the proper product.
Tools and supplies you will need
- A construction-grade stapler, measuring tape, a caulking gun, silicone caulk, a utility knife, a hammer, and enough lighting are all required.
According to the Environmental Protection Agency, many homes’ attic access points, which might include an attic hatch, pull-down stairs, or a knee-wall door, are not adequately insulated. This opening in the attic insulation contributes to increased heat loss in the winter and increased heat gain in the summer months. A 1/4-inch gap around the perimeter of an attic access might possibly leak the same amount of air as a standard bedroom heating duct, according to the National Institute of Standards and Technology.
Take pleasure in taking this easy, economical, and extremely crucial step toward making your home more energy efficient!
Get the Green Living Ideas book in softcover or PDF for as low as $2.99!
Please follow and like us on Facebook: A home’s attic access,Amazon,Attic Tent,Climate Doctors,energy-efficiency,epa,Home Depot,Installation methods for a stair attic tent,Installation procedures for a knee wall door,Insulation,Maintenance Tips: Attic Tent Installation,The Energy Conscious,The Stairway Shop,
About the Author
It consists of a large number of people. In addition to our regular blog pieces, we publish guest blogs from professionals in a wide range of subjects. We’ve set up a donor account only for those extra exceptional folks.
The term “Attic Tent” may not be recognizable to most people, yet it can bring a variety of advantages. If you’re seeking for a way to filter some of the air that circulates between your attic and the other rooms of your house, this device could be the answer to your prayers.
Easy Attic Tent Installation
Installing an Attic Tent is a simple process. Considering that they are specifically designed for simple installation in entrances, there is typically no need for further expert assistance. The majority of folks who have some DIY experience will be able to put them together.
Effectively Stops Air Infiltration
If you lose a significant quantity of energy via your attic, this tent may be able to save you a significant amount of money on your power costs. Installation at a doorway, scuttle hole, or other attic openings will give excellent insulation without the need to invest money to insulate the whole attic.
In rare circumstances, homeowners will utilize an attic tent to keep pests away from their property. Because the tent acts as a barrier between the attic and the living portions of the house, it can help to keep pests from entering your home through the roof. To be sure, this is advantageous for attics that are not totally shut off from the outside environment.
Suitable For All Seasons
The use of an attic tent might help you save money on energy costs throughout the year. The insulation can help to keep heat from escaping through the attic and roof, which is particularly useful in colder weather. The insulation will keep cool air from escaping throughout the summer, maintaining the temperature of your home at a comfortable level. Naturally, a decent HVAC system will make a significant impact in the comfort of your own house.
While appropriate attic insulation is usually the preferred course of action, funding for a large-scale restoration are not always readily available. If this is the case, but you still want to save money, an attic tent may be the more cost-effective option for you throughout the year.
Check Out Energy-Saving Products At Poe Air
In addition to the attic tent, Poe Air offers a variety of other items that can help you save money on your electricity costs over time. You may also chat with one of our energy specialists to learn how to save money on your energy costs. Effective HVAC might take a significant initial investment, but it can save you a significant amount of money over the long term.
Convert Attic Into Year Round Tent
TimflyAdvertisement’s video, “Love It,” was uploaded. LoveThisPic is a location where people can come and exchange inspirational photographs, quotations, do-it-yourself projects, and a variety of other sorts of photos. The picture/image you’re now seeing was contributed by the user ‘Timfly’ and is entitled Convert Attic Into Year Round Tent. Your favorite social networking sites, such as Facebook, Pinterest, Tumblr, Twitter, or even your personal website or blog, are most likely where you first saw the photo titled “Convert Attic Into Year-Round Tent.” If you enjoy the picture of Convert Attic Into Year Round Tent, or any of the other photographs or images on this website, please register and ‘love’ the image in question.
We hope you love this Convert Attic Into Year Round Tent Pinterest/Facebook/Tumblr image and that you will spread the word about it to your social media contacts.
Attic Condensation in Winter: What Causes it & How to Prevent it
TimflyAdvertisement’s “Love It” video was uploaded. This is a site where individuals can come and exchange inspiring pictures, quotations, do-it-yourself projects, and many other sorts of photographs. Convert Attic Into Year Round Tent was posted by the user ‘Timfly’ and is currently shown on this page. Your favorite social networking sites, such as Facebook, Pinterest, Tumblr, Twitter, or even your personal website or blog, are most likely where you first saw the photo “Convert Attic Into Year Round Tent.” In order to ‘love’ the picture of Convert Attic Into Year Round Tent and other photosimages on this page, you must first register with the site.
We hope you love this Convert Attic Into Year Round Tent Pinterest/Facebook/Tumblr image and that you will spread the word about it to your social media contacts.
Why Does my Attic Have Condensation?
TimflyAdvertisement’s “Love It” video was uploaded on YouTube. LoveThisPic is a location where people can come and exchange inspiring photographs, quotations, do-it-yourself projects, and a variety of other sorts of photos. The picture/image you are currently seeing was contributed by the user ‘Timfly’. Your favorite social networking sites, such as Facebook, Pinterest, Tumblr, Twitter, or even your personal website or blog, are most likely where you first saw the photo titled “Convert Attic Into Year Round Tent.” Convert Attic Into Year Round Tent and other photosimages on this website are for you if you make an account and ‘love’ it.
We hope you love this Convert Attic Into Year Round Tent Pinterest/Facebook/Tumblr image and that you will spread the word about it to your social media networks.
Convert Attic Into Year Round Tent Photos for Tumblr, Convert Attic Into Year Round Tent Photos for Pinterest, Convert Attic Into Year Round Tent Photos for Facebook, Convert Attic Into Year Round Tent Photos for Tumblr
What Causes Attic Condensation?
- Attic insulation and/or ventilation that is insufficient
- Ventilation systems in bathrooms and laundry rooms are improperly vented, and are channeled to the attic (instead of outdoors). Hairline cracks in the water supply pipework
How Do I Know if I Have Attic Condensation?
When attempting to establish whether or not you have an attic condensation problem, there are a few symptoms to look for:
- Evidence of water trickling down the walls (or already trickling down the walls)
- A musky, moist smell
- Mold, rust, and dark stains are all potential problems. Insulation that is damp or moist
- Wood that has become damp or moist
- There are water stains on the floor. Moisture on flat surfaces such as glass window panes or other flat surfaces Roof sheathing that is buckled, damaged, or moist
How do I Stop Condensation in my Attic?
Three things must be done in order to prevent condensation (and frost) from forming in your attic:
- Improve attic insulation and ventilation
- Ensure that bathroom and dryer vents are directed outdoors
- Eliminate or decrease air leaking into the attic.
You can install a dehumidifier in your attic as a temporary remedy, but be aware that you may have to empty it many times a day until you can get a roofer to come out and apply the alternatives listed above.
If you are experiencing roof leaks,contact us today.
The process of ensuring that your home is on the path to smart energy efficiency is time-consuming and difficult. However, when there is an attic involved, the task of maintaining your home environmentally friendly becomes much more difficult. That is why you should include an attic tent in your plan, so that you can block the chilly air from getting into your home. As a result of increased awareness, homeowners are becoming more conscious of the air transfer/loss that happens via their attic.
This has proven unsuccessful.
At the same time, insulation can cause dangerous airborne particles of fiberglass and dust to be released into the atmosphere every time the attic door is opened or closed.
In addition to helping you achieve EnergyStar certification for your house, the attic tent will significantly enhance the quality of your indoor air.
What Is an Attic Tent?
The majority of homeowners are aware that the attic is the most typical location where expensive residential energy is wasted, whether in the summer or the winter months. The attic tent is the most effective insulation cover for attic access since it can be erected over attic stairs, knee-wall doors, pull-down attic steps, and full-size doors without compromising insulation performance. Its principal function is to prevent the undesirable exchange of air between the inside of the house and the attic space.
However, this is a major energy-saving blunder since the gap in the attic insulation contributes to both heat gain in the summer and heat loss in the winter, resulting in a net energy loss.
As a result, investing in an attic tent will prove to be cost-effective, as it will assist you in air-sealing the attic access. As a result, heating and cooling expenditures will be reduced throughout the year.
Installation Process for a Stair Attic Tent
If there is a stairway leading from your living area to the attic, you will need to address the air leakage that is created by this access point. As a result, it is as simple as following the five steps shown below to build an attic tent and prevent any energy loss from occurring.
- Measure the distance between the attic stairs and the height of the stairwell (start from above the frame). This measurement will assist you in selecting an attic tent that is the appropriate height for your needs. Consider doing some preliminary research on the product’s size information before placing an order online or going out to purchase it. Next, take measurements for the access path (you’ll need the inner width and length of the preliminary frame for this). In order to make opening the attic tent as simple as possible, it should be installed with the zipper heads at the hinge end of the steps. Use staples to secure the mounting flange to the frame (approximately every 2-3 inches on all four sides) in order to ensure airtight insulation. Seal the joint between the rough frame and the mounting flange with a bead of caulk. Source
Installation Process for Knee Wall Door
Many older American homes feature an access point to their attics through a knee wall door that can be opened from the outside. Fortunately, air-sealing this style of door is not difficult; the procedure for doing so is outlined below in step-by-step instructions.
- Make a vertical alignment with the attic tent so that it covers the rear side of the door frame
- Check to see that the zipper end is pointing downward. Fold the flange under the zipper side so that it is in tight contact with the floor
- Then repeat the process. To finish up the attic side, staple a bead of caulk around the door frame and caulk around the bottom of the door frame
Keep in mind that, depending on the arrangement of your attic access, you may be able to utilize different types of attic tents in your house. That is why you must double-check that you have chosen the correct product before placing your purchase for an attic tent. Source
Installation Process for Air-sealing Pull-down Attic Stairs
Pull-down attic stairs need a certain amount of technical expertise in order to be installed properly. Therefore, if you do not possess the essential knowledge and abilities, we recommend that you seek the assistance of a professional to assist you. You will need to follow the steps outlined below in order to air-seal your pull-down attic stairs.
- Starting with the final trim and enclosure surrounding the attic hatch, air-seal the area around the hatch. With care, remove the finish trim from the wall (keep an eye out for nails)
- Using a piece of rough cut drywall, seal the opening between the attic hatch frame and the rough cut drywall after you have removed the trim. For wider gaps, foam sealant should suffice, while caulk should suffice for smaller gaps (1/4′′ and lower). Using caulk, seal the margins of the trim, both on the inside and the exterior of the house. After that, you may reattach the trim to the access route. After you’ve air-sealed the trim and frame, you may add a sealing gasket (such as the one that seals your refrigerator door) or a strong bulb weatherstrip to complete the job. The gasket/weatherstrip should be installed on the top edge of the joists and then wrapped around the pull-down steps to complete the installation. After you’ve finished installing the gaskets, cover the pull-down stairs in the attic with a plywood “coffin” to protect them from damage. The internal perimeter of the coffin should be measured such that it fits within the inside edge of the joists of the access route
- Hinges should be attached to the plywood box on the back exterior, which should be fixed to the joists with screws. As you ascend the ladder to the attic, the hinges should be directly in front of you.
If you are installing an attic tent for stairs or a knee-wall door, or whether you are air-sealing your pull-down attic stairs, you must recognize the necessity of insulation. Given the significant energy liability that an attic represents, attic insulation should be installed to a high level of performance. Professional installers would often insist on a minimum R-49 rating for their work. (For additional information on attic insulation, including prices and savings, see our post here.) Even while insulating and installing an attic tent might be time-consuming, homeowners will notice significant gains in their energy savings as a result of their efforts.
Cold drafts in the winter and heat penetration during the scorching summer days are no longer an issue!