How To Setup And Hdt Airbeam 2032B Tent

AirBeam® Shelters Archives

HDT AirBeam shelters are used in command and control (C2) operations centers, base camps, aircraft and vehicle repair, medical, chemical, biological, and decontamination applications, as well as industrial and commercial applications. Any size AirBeam shelter will provide the same level of interconnectivity, durability, and ease of deployment as any other AirBeam shelter.

  • 40′ x 56′ (12.2 x 17.1 m)
  • 40′ x 70′ (12.2 x 21.3 m)
  • 40′ x 140′ (12.2 x 42.7 m)
  • The AirBeam RaDome (radar dome) is a weatherproof casing for the protection of a microwave or radar antenna that is available in three (3) different sizes:
  • 15′ x 15′ (4.6 x 4.6 m)
  • 22′ x 22′ (6.7 x 6.7 m)
  • 33.6′ x 34.5′ (10.24 x 10.5 m)
  • 15′ x 15′ (4.6 x 4.6 m)

Model # Part # NSN/NSN-OD NSN-TAN HDT BASE-X . – HDT Global

Strong HDT /strongProduct List 1 of 16strong Model /strong strong Part /strong strong NSN /strong / strong NSN /strong – strong OD /strongstrong NSN /strong – strong TAN /strongstrong HDT /strongstrong BASE /strongstrong -X® EXPEDITIONARY SHELTERS /strongstrong BASE /strongstrong -X® EXPEDITIONARY SHELTERS Shelters are available in the following colors: green (strong OD/strong), tan (TN), and grey (GY) Shelter, Base-X, 102, 9.5’x10′ 60102 – – Shelter, Base-X, 102, 9.5’x10′ 60102 – – 9.5’x15′ Base-X shelter (number 60103), 9.5’x15′ 8340-01-533-1682 8340-01-533-1681 8340-01-533-1682 Shelter, Base-X, 105, 9.5’x25′ 60105 8340-01-533-1678 8340-01-533-1680 Shelter, Base-X, 105, 9.5’x25′ 60105 Shelter, Base-X, 203, 14’x15′ 60203 8340-01-533-1677 8340-01-533-1671 Shelter, Base-X, 203, 14’x15′ 60203 Shelter, Base-X, 205, 14’x25′ 60205 8340-01-533-1674 8340-01-533-1675 Shelter, Base-X, 303, 18’x15′ 60303 8340-01-533-1685 8340-01-533-1686 Shelter, Base-X, 305, 18’x25′ 60305 8340-01-533-1672 8340-01-533-1668 Shelter, Base-X, 307, 18’x35′ 60307 8340-01-533-16 Shelter, Base-X, 505, 26’x25′ 60505 8340-01-533-2650 – Ultra Light 60505ULME – – Shelter, Base-X, 505, 26’x25′ 60505 8340-01-533-2650 – Shelter, Base-X, Dome, Hex, 6D31 606D31 8340-01-533-1688 8340-01-533-1689 8340-01-533-1688 8340-01-533-1689 Shelter, Base-X, Dome, Extnd, 8D36 608D36 8340-01-533-1667 8340-01-533-1669 Shelter, Base-X, Dome, Extnd, 8D36 608D36 Shelters with Stove Pipe Openings – Colors Green (strong OD /strong), Tan (TN), and Grey (GY) Shelter, Base-X, 203, 14’x15′, SPF 60203SP 8340-01-545-5888 8340-01-545-5875 Shelter, Base-X, 203, 14’x15′, SPF 60203SP 8340-01-545-5888 Shelter, Base-X, 203, 14’x15′, SPF 60203SP The Shelter, Base-X, 303, 18’x15′, SPF 60303SP is available at the following numbers: 8340-01-545-5869 and 8340-01-545-5884.

  • The Shelter, Base-X, 305, 18’x25′, SPF 60305SP is available at the following numbers: 8340-01-545-5869 and 8340-01-545-5884.
  • A shelter with a base-X 307GPMS and an 18’x35′ SPF is 60307SP and has an 8340-01-568-0697 number.
  • 60307GPSLP-KT – – Company Command Post Kit, 60307GPSLP-KT (See Product Catalog for Item List) 60305CP01 – – Decon Shelters – Components can be found in the Product Catalog.
  • The 7010201CS is an ambulatory shelter with decon, Base-X, and 203 lanes.
  • 703102CS Medical Shelters and Shelter Systems 70330302CS – The use of colors Green (strong OD/strong), Tan (TN), and Grey are the primary colors (GY) – Shelter System, 12 Bed EMMTS – with beds.

The 45MS12-01 Shelter System, 25 Bed EMMTS, has a square design (with beds, no cargo trailer) The 45MS25B-03 Shelter System, 25 Bed EMMTS – Hub and Spoke configuration (with beds – no cargo trailer) Shelter System with a Drive Thru (45MS25B-04) and Double Doors (no trailer) The 45DTS-03GY Patient Isolation Kit is designed to keep patients isolated (Includes 6 beds, no cargo trailer) 45ISK01 – -strong HDT /strong 45ISK01 – -strong HDT SHELTERS FOR THE AIRBEAMstrong HDT /strong Model /strong s /strong s /strong s /strong s /strong s – Available in two colors: green (strong OD/strong) and tan (TN) AirBeamstrong Model /strong2032A Shelter, AirBeamstrong (3 Windows ea Side, End Prsnl Doors) Shelter, AirBeamstrong Model /strong2032A V00-010-2032A V00-010-2032A V00-010-2032A (2 WindowsDoor ea Side, End Prsnl Doors) V00-010-2032B – – Shelter, AirBeamstrong Model /strong2032B2 V00-010-2032B – – Shelter, AirBeamstrong Model (2 WindowsCntr Door ea Side, End Prsnl Doors) V00-010-2032B2 – – Shelter, AirBeamstrong Model /strong2021D V00-010-2032B2 – – Shelter, AirBeamstrong Model /strong2021D (1 Window 1 Door ea Side, End Prsnl Doors) The shelter, AirBeamstrong Model /strong2021E is part of the V00-010-2021D series (2 Windows ea Side, End Prsnl Doors) A shelter with an AirBeam Radome measuring 20’x20’x10′ in tan is described as V00-010-2021E.

(does not include compressor) 20’x20’x10′ Shelter with AirBeam Radome and Windows (60VRAD01TN).

60VRAD01TN (does not include compressor) 15’x15’x10′ shelter with AirBeam Mini Radome, model 60VRAD02TN, in Tan (does not include compressor) U.S.

TEMPER Type XXXI – Billet/Admin V00-010-023 – 8340-01-558-4701 TEMPER Type XXXI – Billet/Admin V00-010-023 Type XXXII TEMPER – Hygiene – Shower TEMPER 8340-01-559-3853 – V00-010-025 – 8340-01-559-3853 TEMPER Type XXXIII – Kitchen 1 V00-010-027 – 8340-01-559-3854 TEMPER Type XXXIII – Kitchen 1 V00-010-027 TEMPER Type XXXIII – Kitchen 1 V00-010-027 TEMPER Type XXXIII – Kitchen 1 V00-010-027 TEMPER Type XXXIII – Kitchen 1 V00-010-027 Type XXXIV of the TEMPER is for recreation.

8340-01-558-4699 – V00-010-029 – 8340-01-558-4699 TEMPER Type XXXV – Laundry V00-010-031 – 8340-01-559-3859 TEMPER Type XXXV – Laundry V00-010-031 TEMPER Type XXXVI – Kitchen 2 V00-010-033 – 8340-01-558-8699 TEMPER Type XXXVI – Kitchen 2 V00-010-033 TEMPER Type XXXVI – Kitchen 2 V00-010-033 TEMPER Type XXXVI – Kitchen 2 V00-010-033 TEMPER Type XXXVI – Kitchen 2 V00-010-033 TEMPER Type XXXVI – Kitchen 2 TRICON TEMPER Type XXXVII – Kitchen – TEMPER Type XXXVII – TRICON 8340-01-558-4702 – V00-010-035 – 8340-01-558-4702 TEMPER Type XXXVIII – Hygiene V00-010-037 – 8340-01-558-4703 TEMPER Type XXXVIII – Hygiene V00-010-037 TEMPER Type XXXIX – Laundry Machine for Small Loads 8340-01-558-4704 – V00-010-039 – 8340-01-558-4704 Temperature Control Unit Type XL – Open End 8340-01-558-8705 – V00-010-041 – 8340-01-558-8705 Temperature Control Unit Type XLI – Stand Alone – Billet/Admin 1 (Includes compressor) V00-010-043 – 8340-01-558-8707 (Temperature Control Unit Type XLI) Temperature Control Unit (TEMPER) Type XLII (Stand Alone) – ISO End (Includes compressor) 8340-01-558-8709 – V00-010-045 – 8340-01-558-8709 TEMPER Type XLIII – Stand Alone – Billet/Admin 2 (Includes compressor) V00-010-047 – 8340-01-558-8711 TEMPER Type XLIII – Stand Alone – Billet/Admin 2 TEMPER Type XLIV – Stand Alone – ISO Side (Includes compressor) V00-010-049 – 8340-01-558-8712 TEMPER Type XLV – Stand Alone – TRICON (Includes compressor) V00-010-051 – 8340-01-558-8694 TEMPER Type XLV – Stand Alone – TRICON (Includes compressor) V00-010-051 – 8340-01-558-86 TEMPER Type XLVI – Stand Alone – Small ISO (Includes compressor) V00-010-053 – 8340-01-558-8693 TEMPER Type XLVI – Stand Alone – Small ISO (Includes compressor) Small Billet, Stand-Alone Type XLVII, TEMPER Type XLVII (Includes compressor) 8340-01-558-8696 – V00-010-055 – 8340-01-558-8696 The color green represents the configurations of the United States Army Force Providers.

Shelters of Types XXXI – XLVII have lights and vestibules (with the exception of Type XXXVI).

TEMPER Type XXXI – Billet/Admin V00-010-022 8340-01-559-3852 – TEMPER Type XXXII – Hygiene – Shower TEMPER Type XXXI – Billet/Admin V00-010-022 8340-01-559-3852 – TEMPER Type XXXII – Hygiene – Shower V00-010-024 8340-01-559-3851 V00-010-024 8340-01-559-3851 – TEMPER Type XXXIII – Kitchen 1 V00-010-026 8340-01-559-3856 – TEMPER Type XXXIII – Kitchen 1 V00-010-026 – TEMPER Type XXXIV – Recreation V00-010-028 8340-01-558-8698 – TEMPER Type XXXIV – TEMPER Type XXXIV – TEMPER Type XXXIV – TEMPER Type XXXIV – TEMPER Type XXXIV – TEMPER Type XXXIV – TEMPER Type XXXIV – TEMPER Type XX

HDT Global AirBeam 2032 Lightweight Shelter Tent

HDT’s AirBeamTM Shelters, which include the Model 2032, are the most technologically sophisticated tactical shelters available. They have been selected by the United States Army for use as Force Providers and for the construction of a new 150-troop Expeditionary Base Camp. It was determined that they would meet or surpass all of the United States military’s standards for general-purpose field tents due to their ease of use, fast deployment, and strike time capabilities. Models in the 600 sq ft range are available in a number of layouts and combinations.

  • Ducts for the Environmental Control Unit (ECU)
  • Thermal liner that is removable and lightweight, with an airflow distribution plenum
  • Lightweight cargo net for use in storing and transporting shelter materials. There are less requirements in terms of weight, cube, and people. Field upkeep is simple. Efficacious in terms of energy consumption Superior tensile and tearing strength

Information Supplementary to the above

Model Item Number
AirBeam® Model 2032A, Tan (3 Windows ea Side, End Prsnl Doors) V00-010-2032ATN
AirBeam® Model 2032A, Green (3 Windows ea Side, End Prsnl Doors) V00-010-2032AOD
AirBeam® Model 2032B, Green (2 WindowsDoor ea Side, End Prsnl Doors) V00-010-2032BOD
AirBeam® Model 2032B, Tan (2 WindowsDoor ea Side, End Prsnl Doors) V00-010-2032BTN
AirBeam® Model 2032B2, Green (2 WindowsCntr Door ea Side, End Prsnl Doors) V00-010-2032B2OD
AirBeam® Model 2032B2, Tan (2 WindowsCntr Door ea Side, End Prsnl Doors) V00-010-2032B2TN

View Details for Buy # 1036069

Buy: 1036069
Solicitation: BRAGG18ABCKW0001
Buy Description: Airbeam Tent
Category: 83 – Textiles, Leather, Furs, Apparel and Shoe Findings, Tents and Flags
Sub Category: 8340 – Tents and Tarpaulins
NAICS: 314999 – All Other Miscellaneous Textile Product Mills
SAM Contract Opportunity: Yes (IfYes, buys prior to 11/2019 were posted to FBO)
Set-Aside Requirement: Small Business
Buyer: MICC End User
End Date: 08/06/2020
End Time: 17:00 ET
Seller Question Deadline: No Seller Question Deadline Set
Delivery: 10 Day(s) -Required(No. of calendar days after receipt of order (ARO) by which Buyer requires Seller to deliver)
Instructions
In addition to providing pricing through the marketplace, Sellers MUST include certainnon-pricinginformation as document(s) attached to their Bid, so they are received no later than the closing date and time of this Buy. Pricing will not be accepted if it is included in the attachment(s). Attachment(s) can total no more than 20 MB, whether multiple files or one file, and may be zipped to decrease their size. A Seller’s failure to comply with these terms may result in its Bid being determined to be non-responsive. The attachment(s) must include the followingnon-pricinginformation: Attachments must include specification and data sheets for all items being offered.
Open Market bids are accepted in this solicitation; however, please refer to the specifications below, including ‘Set-Aside Requirement’ provision, for additional requirements.
The Buyer is allowing Sellers to submit bids for alternate items, provided those items meet all of the salient physical, functional, or performance characteristics specified by this solicitation. Sellers MUST enter exactly what they are bidding (including make, model and description) into the blank description field in order for the bid to be considered.The Buyer will evaluate ‘equal’ items on the basis of information furnished by the Seller or identified in the bid and reasonably available to the Buyer. The Buyer is not responsible for locating or obtaining any information not identified in the Bid.
The Buyer is requiring that any rebid must be lower than the ‘current bid price’ by this amount. The reduction is based on the total order and must be satisfied within the rebid minimum.
Buyer intends to issue award using a purchase order, delivery order, or purchase card. If utilizing a purchase card, Buyer will communicate account information to Selected Seller outside of the Marketplace.
This solicitation is a Small Business Set-Aside and only qualified Sellers can bid.
Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
Sellers understand that the Marketplace ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance.
Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the buyer to respond. Questions can be submitted by using the ‘QuestionsResponses’ link. Questions not received within a reasonable time prior to close of the solicitation may not be considered.
Unless otherwise specified in the Buy Terms, below, Bid must be good for 30 calendar days after close of Buy and shipping must be free on board (FOB) destination CONUS (Continental U.S.)
Name Description
Provisions The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.
Clauses The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance OfPayments Program; 252.225-7036, Buy American Act – Free Trade Agreements – Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.
SAM Registration IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found ator by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 – System for Award Management Maintenance
Shipping Shipping is FOB Destination CONUS (CONtinental U.S.).
New Equipment New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.
Quote Submitted Quotes will be valid for 45 days after the auction closing.
Request for Quote This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).
FARsite IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically atand are current to the most recent revision dates posted on this site.
NAICSSize Standard The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at
AMC-Level Protest Program 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: [email protected]). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.Headquarters U.S. Army Materiel CommandOffice of Command Counsel-Deputy Command Counsel4400 Martin RoadRm: A6SE040.001Redstone Arsenal, AL 35898-5000Fax: (256) 450-8840 or email [email protected] AMC-Level Protest procedures are found at:amp;data=02%7C01%7CJosh.Beardsley%40unisonglobal.com%7C2798dadfe71f4cf276d608d82f6d881d%7C876dcbb6031f4d679f1a1bcbb73b2c30%7C1%7C0%7C637311494778959440 amp;sdata=VeNAjNmsXtBnHrEKgEIvqt2wS2xvU30Czpqg1LRHpgY%3D amp;reserved=0.If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.
Service Terms: “52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report”
Provision 252.209-7999 Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.
Provision 252.232-7006 Wide Area WorkFlow Payment Instructions
Clause 252.204-7012 252.204-7012 Safeguarding of Unclassified Controlled Technical Information
PALLETIZATION All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.
Unfunded Requriement This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.
Basis of Award IAW FAR 52.212-2; Evaluation – Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price.Technical capability is more important than price.
No Multiple Awards No multiple awards will be made.Quotes received through Unison Marketplace will be evaluated and awarded on an “all-or-nothing” basis.
Clause 252.232-7006 Wide Area WorkFlow Payment Instructions
Vendor Questions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer – [email protected] or call 315-772-5582.
Buy American Act In accordance with DFAR provision 252.225-7000Buy American Act-Balance of Payments Program Certificate,I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****
See also:  Where To Buy A Teepee Tent

SAMDaily.us

SAMDAILY.US – ISSUE OF AUGUST 05, 2020 SAM6824SOLICITATION NOTICE

83 – Airbeam Tent

Notice Date8/3/2020 1:31:37 PMNotice TypeCombined Synopsis/Solicitation NAICS314999— All Other Miscellaneous Textile Product MillsContracting OfficeW6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USAZIP Code13602-5220Solicitation NumberBRAGG18ABCKW0001Response Due8/6/2020 12:00:00 AMArchive Date02/02/2021Point of ContactName: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: [email protected];E-Mail [email protected]([email protected])Small Business Set-AsideSBA Total Small Business Set-Aside (FAR 19.5)AwardeenullDescriptionAMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is BRAGG18ABCKW0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 314999 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing onwill start on the date this solicitation is posted, and, unless otherwise displayed atwill end on: 2020-08-06 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Bragg, NC 28310 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Exact model or equivalent to HDT Model 2021D (Airbeam Tent) HDT part number V00-010-672 Color: Olive Drab Interior dimensions: Floor Space: 20’x21.5′(6.1×6.6m) Area: 430 square feet (39.9 square meters) Packaged dimensions: 72″”x30″”x30″” (183×76.2×76.2 cm) Weight: Total weight 539lbs (244.5 kgs) Set up: Time: 15 minutes personnel: 2 each, 5, EA; LI 002: Exact model or equivalent to HDT Model 2032B (Airbeam Tent) HDT part number: V00-010-670 Color: Olive Drab Interior dimensions: Floor Space: 20’x32′(6.1×9.8m) Area: 640 square feet (59.5 square meters) Packaged dimensions: 72″”x40″”x40″” (183x102x102 cm) Weight: Total weight 708lbs (321.1 kgs) Set up: Time: 15 minutes personnel: 3 each, 10, EA; LI 003: Exact model or equivalent to HDT “”Dewalt Air Compressor”” HDT part number: VA001-05-0058 Drive: Belt Drive Horsepower: 1.6 HP Tank Size: 4.5gal Power Supply: 120V CFM @ 100 PSI: 5.0 CFM Pump Speed: 1750 RPM LxWxH: 33.5″”x23″”x15″” Max. Pressure: 200 PSI Operational Noise Level: 78 dBA, 15, EA; LI 004: Exact model or equivalent to HDT Airbeam Assembly 10″” Configurable for HDT Model 2021D and 2032B Color: Olive Drab Packed dimensions: 19″”x19″”x19″” Deployed Dimensions: 22’x19″”x10’8″”, 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the ‘Submit a Question’ feature atQuestions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency’s ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located atThere is no cost to register, review procurement data or make a bid onOfferors that are not currently registered to useshould proceed toto complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at [email protected] Offerors may not artificially manipulate the price of a transaction onby any means. It is unacceptable to place bad faith bids, to use decoys in theprocess or to collude with the intent or effect of hampering the competitiveprocess. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or [email protected] of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act – Free Trade Agreements – Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found ator by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 – System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically atand are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: [email protected]). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email [email protected] The AMC-Level Protest procedures are found at_data=02%7C01%7CJosh.Beardsley%40unisonglobal.com%7C2798dadfe71f4cf276d608d82f6d881d%7C876dcbb6031f4d679f1a1bcbb73b2c30%7C1%7C0%7C637311494778959440 sdata=VeNAjNmsXtBnHrEKgEIvqt2wS2xvU30Czpqg1LRHpgY%3D reserved=0. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. “”52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report”” Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. IAW FAR 52.212-2; Evaluation – Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer – [email protected] or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act-Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Web LinkSAM.gov Permalink( Place of PerformanceAddress:Fort Bragg, NC 28310, USA Zip Code:28310 Country:USARecordSN05743389-F 20200805/200803230147 (samdaily.us)SourceSAM.gov Link to This Notice(may not be valid after Archive Date)


|FSG Index |This Issue’s Index|Today’s SAM Daily Index Page|

HDT FAMILY OF SHELTERS Base-X, DRASH and AirBeam Shelters – PDF Free Download

POP UP DISPLAY WITH FABRIC 10 STRAIGHT A perfect eye-catcher for your trade fair, expo, or conference, our ultra-lightweight aluminum alloy cloth pop-up display with a matte satin anodized finish is the perfect solution. It is a source of further information

2015 Dealer Display Program

Dealer Display Program for 2015. LARGE ACRYLIC DISPLAY GRAPHIC WRAP KITS ARE AVAILABLE FROM LARGE ACRYLIC DISPLAY GRAPHIC WRAP KITS. The Graphic Wrap Kit, which is designed as an exclusive branded kit for Bath Planet Full-Size Acrylic Steel Frame Displays, enhances the professional appearance of the display.

FABRIC POPUP DISPLAY 10FT STRAIGHT

Display Program for Dealerships in 2015 LARGE ACRYLIC DISPLAY GRAPHIC WRAP KITS ARE AVAILABLE FROM LARGE DISPLAY GRAPHIC WRAP KITS. Bath Planet Full-Size Acrylic Steel Frame Displays benefit from the addition of the Graphic Wrap Kit, which is designed as an exclusive branded kit for these displays.

ACOUSTIC PRIVACY SCREENS

Afford-A-Wall Folding Mobile Room Divider Afford-A-Wall Folding Mobile Room Divider Afford-A-Wall Folding Mobile Room Divider (Fabric). 1. 1 Folding Room Divider from the brand Afford-A-Wall (P olycarbonate). 5 Afford-A-Wall Sliding Mobile Rooms are available. More information may be found here.

Coyote popup features

The Coyote popup has the following characteristics: Strongness, dependability, and style are all combined in a lightweight and simple-to-use popup display system with the Coyote popup display system. Given that it is entirely magnetic, assembling and disassembling it is simple and straightforward. More information may be found here.

DCF Optimized Rack System

Users’ Guide to the DCF Optimized Rack System DCF Integrated Cabinet Solutions for Business Continuity and Disaster Recovery IMPORTANT SAFETY GUIDELINES RETAIN THESE INSTRUCTIONS FOR LATER REFERENCE. This booklet offers vital instructions that will help you to achieve your goals.

Coyote popup features

User Manual for the DCF Optimized Rack System IMPORTANT SAFETY GUIDELINES Integrated Cabinet Solutions for Business-Critical Continuity PUT THESE INSTRUCTIONS AWAY FOR LATER REFERENCE This handbook offers vital instructions thatMore information may be found on the internet.

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Who We Are One company, total support, and comprehensive solutions are what we provide. Hydratight has been providing world-class bolted joint solutions for more than a century, and the company continues to establish worldwide standards. More information may be found here.

Aviation HangarsCargo Facilities

Aviation HangarsCargo Facilities Engineering Excellence in BUILDING SYSTEMS Excellence in engineering Rubb hangars provide efficient, long-lasting, and fire-resistant protection for aircraft and equipment.

This winter has seen more than 80 inches of snow, according to the National Weather Service.

Commercial Gas Water Heaters

MODULATING MODULATING BURNER FOR CYCLONE Mxi MODULATING BURNER PUSHES THE CYCLONE TO HIGHER LEVELS OF EFFICIENCY Cyclone Mxi condensing water heaters by A. O. Smith have been intended to deliver years of trustworthy service. For more information, visit their website.

CLEAR-DIVISIONS APERTO

CLEAR-DIVISIONS Introduction: The CLEAR-DIVISIONS moveable glass wall system is described in detail in the following three (3) part specification, which includes both the Standard and Optional features. The locations in theMore information that have been highlighted in yellow

Rack Installation Instructions

Installation Instructions and Guidelines for Racks This document contains instructions on how to install your server into a normal rack cabinet by utilizing the rail kit that was included with your server. If you are no longer interested, more information may be found here.

EasyTrack 2 Accessories List

EasyTrack 2 Parts and Accessories ET6061 is a DATA LOGGER. EasyTrack2 is a data logging program (6 Channel) Temperature Range: -150 to 500 degrees Celsius (-238 F to 932 F) Accuracy is 0.5 degrees Celsius (0.9 F). Thermocouple of the type K. Per channel, there are 6000 readings. More information may be found here.

Microcor Wireless Transmitter (MWT)

Rohrback Cosasco Systems, Inc. is a privately held corporation. The following are the characteristics of the Microcor Wireless Transmitter (MWT): High Resolution Metal Loss Measurement for All Process Environments Using a Highly Secure and Reliable Self-Organizing Wireless Mesh Network More information may be found here.

FLEX by 3M Light Module System

Application of the FLEX by M Light Module System A modular lighting solution for dry, inside applications, FLEX by M (the Product) was developed by M. (the Application). More details about the Product. The Product makes it simple to create lengthy, D lighting trails along a walkway.

THE TRIMLINE 10′ x 20′ CANOPY

THE TRIMLINE CANOPY IS 10′ x 20′ IN SIZE. Instructions for Putting It All Together For the first time, please construct your TrimLine in your house rather than at an event. Please take the time to research theMore information before commencing the assembly of your TrimLine. Thank you.

How To Use Tiger Dam

Water as a Weapon QUALITY IS REMEMBERED LONG AFTER THE PRICE IS FORGOTTEN WHEN IT COMES TO WATER. THE TIGER DAM SYSTEM TM is a water-damage prevention system. As a result of the ever-increasing need for information,

Handbook for Basement

11/03/2015 Choosing the Most Appropriate SolarVenti Basement Solution Version Contents: Information about SolarVenti Basement Dehumidification systems in general. Basement dehumidification is a service that we provide. Three SolarVenti Basement Models are available. 3 More information may be found here.

compact pop up display options

Compact pop-up display alternatives are available. Tabletop height is 4 feet (1×1) Tabletop measures 6 feet in length (2×1) 8-foot-long tabletop (3×1) Tabletop measures 6 feet in length (2×2) 8-foot-long tabletop (3×2) have a look at the video 1 tiny pop-up display solutions are available. Display with a 4ft diagonal (1×3) a display measuring 6 foot More information may be found here.

CLICKBOND FASTENER OVERVIEW:

Infastech Pty Ltd ABN 98 000 482 986 ACN 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax: (03) 9765 6444 Infastech Pty Ltd ABN 98 000 482 986 ACN 000 482 986 A SUMMARY OF THE CLICKBOND FASTENER: Fastening with a CLICKBOND mechanism More information may be found here.

Coyote popup features

The Coyote popup has the following characteristics: Strongness, dependability, and style are all combined in a lightweight and simple-to-use popup display system with the Coyote popup display system. Given that it is entirely magnetic, assembling and disassembling it is simple and straightforward. More information may be found here.

Tactical Solar Power Systems

Portable Solar Power Systems for Tactical Applications NEST Energy Systems Inc., Prescott, Arizona, is the sponsor of this event. Tactical Solar Power Systems are headed up by Tom Lederle, Vice President of Product Development. Electrical power sources are classified into several categories. What exactly is the problem? More information may be found here.

Coyote popup features

The Coyote popup has the following characteristics: Strongness, dependability, and style are all combined in a lightweight and simple-to-use popup display system with the Coyote popup display system. Given that it is entirely magnetic, assembling and disassembling it is simple and straightforward. More information may be found here.

6 Crankcase Ventilation

Introduction to the Crankcase Ventilation System. The Crankcase Ventilation Manager is numbered 6-3. (CVM). Introduction (pages 6-5). CVM280B is a 6-6 CVM. CVM280T is 6-7 CVM280T. CVM424B is a 6-10 CVM424B. More information may be found here.

2014 Display Program

Display Program for the Year 2014 TABLE OF CONTENTS 3 Your Partner at the BathPlanet Exhibition Kits for four large acrylic displays 5 Mini Acrylic Display Kits for Portability Accessories for Portable Display Tables (Set of 6) 7 Different Types of Retractable Banner Stands More information may be found here.

SAFETY SAFETY APPAREL 20,000 PSI

PERSONAL SAFETY APPAREL TurtleSkin Water Armor is intended to provide UHP protection. 2800 bar or 40,000 psi protection is available. Design that is one size fits all and saves money The modular architecture allows you to purchase only the items you require. Replacement More information may be found here.

SPILL CONTAINMENT SOLUTIONS

THE USE OF SPILL CONTROL SOLUTIONS SPC PROVIDES SPILL CONTROL SOLUTIONS. Throughout its almost three decades in operation, SPC has assisted companies in preventing the leaks, drips, and spills that pose a threat to public safety and the environment.

Product Guide Specification

Reef Industries, Inc. 9209 Almeda Genoa Rd. Houston, Texas 77075 Toll Free (800) 231-6074 Phone (713) 507-4251 Fax (713) 507-4295 Web SiteEmail [email protected] Reef Industries, Inc. 9209 Almeda Genoa Rd. Houston, Texas 77075 Toll Free (800) 231-6074 Guide to Using This Product More information may be found here.

Copper Meter Resetters

Set 5/8 inch copper meter resetting screws “Water Meters, 5/8″ x 3/4″, 3/4″, 1″, 1 1 2″2″, 5/8″ x 3/4″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5/8″, 5 11/12 The following is a table of contents: Page Page Meter Resetters 5/8″, 5/8″ x 3/4″, 3/4″,1″ Page Page Meter Resetters 5/8″, 5/8″ x 3/4″, 3/4″,1” “Series 710 Horizontal Inlet and Outlet Adapter More information may be found here.

CLEAR-DIVISIONS VARIOFOLD

In this section, we will discuss the CLEAR-DIVIDIONS VARIOFOLD.

The characteristics of the CLEAR-DIVIDIONS VARIOFOLD movable table are detailed in the following three (3) part specification. The locations in theMore information that have been highlighted in yellow

Section 5 161 kv Power Cables

Recognize Your Alternatives: 61 material and size for 161 kv power cable Material selection is based on a combination of client desire and needed current carrying capability Copper conductor is commonly used for heavier loads. When both copperMore information and silver are present

PORTABLE TRADESHOW DISPLAYS

PORTABLE TRADESHOW DISPLAYS 2015 RETRACTABLE BANNER STANDS 2 BLADE 315 PORTABLE TRADESHOW DISPLAYS 2015 With a telescoping pole and a cushioned carrying case, the ALPHA 315 is a premium retractable banner. Retractable banner with cushioned carrying case for less money. STEP 1 STEP 2 STEP 3 STEP 4 More information may be found here.

PROFESSIONAL PULL-UP BANNERS

BANNERS THAT PULL UP Viro Banner selections are limited to 800 only. For professionals, there are three sizes to choose from: 850, 1000, and 1200 Professional Double Sided Options: 850 only sustainable hardwood bamboo cassette self retractable banner up to 2000mmMore information

301.7D. Mini Hydraulic Excavator

Engine Weights and Gross Power of the 301.7D Mini Hydraulic Excavator (ISO 14396) 17.9 kilowatts 24.3 hp is the maximum power. The operating weight of the vehicle with the canopy is 1610 kg (3,550 lb). 13.2 kilowatts of net power 17.7 kilowatts The operating weight with the cab is 1720 kg (3792 lb). More information may be found here.

glassGlazing Products

GlassGlazing Products are a type of glass glazing. WallMaker The Stylmark WallMaker glass wall system, which is simple to install, allows you to create a limitless number of light, attractive, and safe indoor spaces. This method is extremely adaptableMore details

DisplayExhibit Systems

Page 4 of the DisplayExhibit Systems 2016 Catalog features the NEW Ripple Expandable Banner Stand System. Retractable Banner Stand that is EXPO ready More information about our flagship banner stand, which offers high-quality construction, excellent functionality, and a spectacular price.

Government Bids in United States

This is an amended synopsis/solicitation for commercial products that was produced in accordance with the format specified in FAR Subpart 12.6, with the addition of the additional material contained in this notice. In accordance with the solicitation number BRAGG18ABCKW0001, this solicitation will be issued as a Request for Quote (RFQ), unless otherwise specified in this document. The solicitation document, as well as the provisions and clauses included therein, are those in force as of Federal Acquisition Circular 2020-08 on January 1, 2019.

  1. This need is designated as a Small Business Set-Aside, and only qualified bidders are eligible to submit bids for it.
  2. This deadline takes precedence over the Offers Due Date indicated above.
  3. The MICC End User requires the following elements, which must be brand name or equivalent, in order to function properly: LI 001:Exact replica or functional equivalent of HDT Model 2021D (Airbeam Tent) V00-010-672 is the component number for HDT.
  4. Dimensions of the interior: 20′ x 21.5′ total floor space (6.1×6.6m) 430 square feet is the total floor space (39.9 square meters) Dimensions when packaged: 72″ x 30″ x 30″ (183×76.2×76.2 cm) Weight: The total weight is 539 pounds (244.5 kgs) Preparation: 15 minutes is allotted for this task.
  5. LI 002:Exact replica or functional equivalent of HDT Model 2032B.
  6. Olive Drab is the color of choice.
  7. personnel: three each, a total of ten “Dewalt Air Compressor” component number: VA001-05-0058 from HDT.

Horsepower: 1.6 horsepower Tank Capacity: 4.5 gallons 120V CFM @ 100 PSI: 5.0 CFM (at 120V) Power Supply: Pump rotational speed: 1750 revolutions per minute Dimensions: 33.5″ x 23″ x 15″ Maximum pressure: 200 PSI Operational noise level: 78 decibels at 15 decibels Airbeam Assembly EA;LI 004:Exact replica or comparable to HDT Airbeam Assembly HDT Models 2021D and 2032B may be configured to 10″ in size.

  1. Olive Drab is the color of choice.
  2. Questions must be submitted using the ‘Submit a Question’ function located at the bottom of the page.
  3. *** MICC End User wants to undertake an online competitive reverse auction for this solicitation, which will be conducted by a third-party reverse auction provider, Unison, Inc., as part of the process.
  4. During the aforementioned reverse auction, an Offeror may submit a series of pricing bids, each of which decreases in price over the course of the set time period.

If you are a responsible offeror, you must submit the pricing element of your bid using the online exchange accessible at There is no charge to register, study procurement data, or submit a bid onOfferors who are not presently registered to utilize should complete their free registration as soon as possible by clicking here.

  1. Offerors are prohibited from intentionally manipulating the price of a transaction in any manner.
  2. If offerors seek further information, they should contact their point of contact or Marketplace Support at 1.877.933.3243 or [email protected]
  3. It is possible that your offer will be rejected if you do not adhere to the terms and conditions outlined in the following section.
  4. By reference, the following provisions are incorporated: FAR Instructions to Offerors, Section 52.212-1 The provisions of 52.212-3, Offeror Representations and Certifications, are incorporated herein by reference.
  5. This solicitation is subject to the following provisions: FAR 52.212-4, Contract Terms and Conditions – Commercial Items (Contract Terms and Conditions – Commercial Items).

Equal Opportunity; Section 52.222-26; The Affirmative Action for Workers with Disabilities Act, Section 52.222-36; 52.225-13, Restrictions on Certain Foreign Purchases; 52.225-14, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Payment by Electronic Funds Transfer-System for Award Management).

  • Information can be obtained by dialing 866-606-8220, or 334-206-7828 for international callers, or by visiting the website.
  • ONLY BRAND NEW EQUIPMENT.
  • Quotes submitted will be valid for 45 days following the conclusion of the auction.
  • In accordance with FAR 52.252-2 Clauses The complete text of the FAR and DFARS Clauses, which are incorporated by reference, can be read electronically at and is up to date with the most recent amendment dates given on this site, as well.
  • It is possible to find the small business size criterion for that NAICS code by dialing 515.2233-4000.
  • However, you have the option of filing a protest with the Army Materiel Command’s Headquarters (HQ) (AMC).
  • While the protest is pending, contract award or performance is suspended to the same degree and within the same time periods as if the protest had been filed with the GAO.
  • Protests must be filed within the time frames stated in FAR 33.103 in order to be considered timely.

Department of Defense, Headquarters United States Army Materiel Command 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy redstone usamc mbx protests at mail.mil It is possible to find the AMC-Level Protest procedures at_data=02 percent 7C01 percent 7C Josh.Beardsley percent 40unisonglobal.com percent 7C2798dadfe71f4cf276d608d82f6d881d percent 7C876dcbb6031f4d679f1a1bcb percent 7C876dcbb6031f4d679f1a1bcb percent 7C876dcbb6031f4d679f1a1bcb 73b2c30 percent 7C1 percent 7C0 percent 7C637311494778959440 sdata=VeNAjNmsXtBnHrEKgEIvqt2wS2xvU30Czpqg1LRHpgY percent 3D reserved=0 73b2c30 percent 7C1 percent 7C0 percent 7C637311494778959440 .

The contracting officer or headquarters AMC should be contacted if internet connection is not available to receive the HQ AMC-Level Protest Procedures.” 52.237-2, Protection of Government Buildings, Equipment, and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition on Storage and Disposal of Toxic and Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material Inspection and Receiving Report; 52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.2 A corporation’s representation in connection with an unpaid tax liability or an arrest and conviction under any federal law is defined as follows: a large geographical area Payment Instructions for the Workflow 252.204-7012 Controlled Technical Information that is not classified 252.204-7012 Protection of Unclassified Controlled Technical Information All supplies must be palletized if the total weight of the cargo (without the pallet) or the total volume of the material exceeds 20 cubic feet, in accordance with the standards of Department of the Army Pamphlet 700-32 and MIL-STD-147E.

  • This is currently an unfunded requirement, but there is a high likelihood that funds will become available in the near future.
  • In accordance with FAR 52.212Of2, Evaluation – Commercial Items, the following factors should be considered when evaluating offers: the technical capacity of the item supplied to fulfill the Government demand, as well as the price of the item being offered.
  • There will be no multiple prizes given out.
  • a large geographical area Payment Instructions for the Workflow Please direct any questions you have to the Unison Marketplace for purchase.

In accordance with DFAR provision 252.225-7000 Buy American Act-Balance of Payments Program Certificate, I certify that each end product, with the exception of those listed in paragraphs (c)(2) and (3) of the attached provision, is a domestic end product, as defined by the Buy American Act-Balance of Payments Program Certificate.

In the event that you do not complete the form and deliver something other than a DOMESTIC END PRODUCT, your delivery will be refused.

Contracting Officer’s Office Location

  • CONTRACTING OFFICE, 45 WEST STREET, FORT DRUM, NEW YORK 13602-5220, United States

Contact with a Secondary Point of Contact

Leave a Comment

Your email address will not be published. Required fields are marked *