How To Repair Broken Fiberglass Tent Pole

How To Repair Broken Fiberglass Tent Pole

If it’s raining, how do you pack a tent? If you have a damp tent, the easiest method to pack it up and prevent getting your other stuff wet is to shake it out and remove as much water as you possibly can. To keep it safe, consider putting it in an exterior pocket first. This will prevent your other belongings from becoming soaked, and it will help the tent to dry more quickly.Can you put a tent up in the rain? No. It is one of the most frustrating situations to find oneself in when it is raining to pitch a tent.

There won’t be any problems if your tent is set up in an outward direction.

It’s best to wait until the rain stops before putting your tent away if the interior of your tent is exposed when it’s being pitched.

Most likely, if you store your tent while it is still damp, the next time you take it out, it will be coated in mold or mildew.

  1. How do you clean a tent that has been damp?
  2. Start by cleaning any mildew and/or mold-affected areas using a gentle brush.
  3. Once the tent has been cleaned, it should be allowed to dry in the sun.
  4. NO!
  5. Putting your tent in the washing machine might do significant harm to the tent’s structure.
  6. All of the measures listed above are useful, but the most efficient way to camp in the rain is to combine them all.Avoid placing your tent in the washing machine at all costs; instead, clean and dry it yourself.
  7. Your camping excursion will be extremely warm and dry as a result of doing so.
  8. You will be OK if you plan ahead of time and understand how to keep your tent dry when it rains.
  9. Is that anything you’ve thought of doing in a truck bed?

Fix a broken fiberglass tent pole like an expert

What is the best way to load a tent in the rain? The easiest method to pack up your wet tent and prevent getting your other gear wet is to shake out as much water as you can from the tent before packing it up. Then attempt to put it in an exterior pocket to keep it safe. The tent will dry more quickly if you do not have any other stuff to place it in.Can you put a tent up in the rain? It is one of the most frustrating situations you find oneself in while pitching a tent in the rain. Depending on the style of tent you have, this might be a rather straightforward process.

  1. Just make sure you have your tarps and groundsheets ready to go before starting.
  2. If you store your tent while it is still damp, it is likely that it will be coated with mold or mildew the next time you take it out.
  3. If your tent has been left in the rain for an extended period of time, it will need to be thoroughly cleaned.
  4. After that, disinfect the mold places with a solution of lysol and hot water.
  5. Can a tent be washed in a washing machine?
  6. Keep your tent out of the washing machine.
  7. It must be washed and dried by hand.
  8. Make a list of all of your waterproof goods, put up your tent at an angle, and waterproof your tent completely.
  9. Don’t let a little rain ruin your plans for the day.
  10. Learn to keep a tent dry during a rainstorm and you’ll be all set.

If you found this article to be useful, please consider sharing it on your favorite social media site; it will be appreciated more than you can imagine! Have you ever contemplated camping in a truck bed? Visit the following page to see my comprehensive guide to truck bed camping.

Fiberglass tent pole kit

Among the items you will require for this project are: replacement tent poles, a tiny hacksaw, and a screwdriver. SandpaperØ A face mask made of duct tape

The process

The fiberglass poles that are used to support tents are often constructed from a number of loose pole parts that are kept together by a flexible cable or rope. The elastic cable, also known as a shock cord, is threaded through the length of the poles and knotted at both ends to keep it in place. In the event that your pole breaks, it is most probable that just one of the portions has been broken off. You will need to replace it if you want to restore the tent to its original state of operation.

  • Measure the precise portion of the tent pole that has to be replaced and mark it on the tent pole.
  • Cutting the fiberglass pole with a hacksaw will require you to put on a face mask, which you should do before starting.
  • Use duct tape to hold the new pole in place while you cut it to the proper length.
  • The creation of splinters will be prevented as a result of your ability to cut in an ordered manner.
  • Eliminate any remaining pieces of Duct Tape from the pole and sand the pole’s edges to create an even surface. Place the entire tent pole on the floor and begin untying the knot at the end of the pole that is closest to the portion that will be replaced. It is doubtful that you will be able to reach the end of the knot with your fingers, thus a needle nose plier should be used to free it from the pole. It’s possible that the knot was knotted too tightly and you’ll have to cut it
  • Holding the shock cord in place, gently remove the pole parts until you reach the broken part that has to be repaired or replaced. Removing the damaged portion and replacing it with the section that you have prepared is a good idea. While maintaining your grip on the shock cord, re-stretch it through the pole portions that you had previously removed for the time being. Due to the fact that the parts are of varied lengths and diameters, it is important to return the poles in the same condition as you found them. It is possible that your tent will not stand up properly if you mix them together. Finish the string by tying a knot at the end and making sure that it is taught in the same way that you discovered it. The cable secures the tent’s poles in place and provides a defined framework for the tent. This is why you should make certain that it is taught in sufficient quantities.

If you realize that this is not the case later on when you are setting up the tent, take the end of the shock cord and modify the knot accordingly. From either end of the poles, you may do this action.

Use a tent pole repair sleeve

Another option for resolving the issue is to use a pole repair sleeve to secure the pole. A short pole or a so-called splint, which is typically included with the tent that you purchase, is used to repair the tent in the shortest amount of time possible. You should get it even if it is not included in the bundle to be prepared for the worst case scenario. So, what is the best way to fix a tent pole with a splint? To begin, arrange the two broken pole portions in a straight line. If the pole is not broken, simply bend it in half and gently straighten it out.

Straightening the bent parts using pliers can be done with the assistance of a friend.

Use a tent stake

There is another solution if you don’t happen to have an emergency repair kit or a pole repair sleeve with you. If your pole breaks, you can use a stake to put the two fractured sections of the pole back together again. To begin, arrange the broken pole components in a straight line. If each is bent straight, it may be manipulated using pliers. Assemble the stake and place it next to the shattered section; the stake must be centered between the two fractured components. The next step is to use duct tape or another type of heavy-duty tape to secure all of the pieces in place before proceeding.

How do you replace a shock cord?

If you don’t have a repair kit or a pole repair sleeve with you, there is an alternative solution. If your pole breaks, you can use a stake to link the two fractured sections of the pole together once again. To begin, arrange the broken pole components in a straight line from one another. Use pliers to bend each straight if it is bent in the wrong direction.

Assemble the stake and place it next to the shattered section; the stake must be centered between the two fractured pieces. Duct tape or another heavy-duty tape is used as a last step in order to secure all of the pieces together.


First and foremost, you must understand how the shock cord is linked. To see the cable, open the end of the pole and pull it out. In most situations, a metal or plastic tab will be located on the pole, which you may pull out and repair the cable with.


Mark the pole parts with numbers so that you will know how to link them together at the conclusion of the project. Remove the old shock cord by untying it, pulling it out, and placing it somewhere where you can cut a new cord of the same length.


Take the new cord and connect a tab to the end of it using a piece of tape. You’re almost through with threading the cable through the pole. Using the clamp or vise grip, forcefully pull the cable to cut it off when you reach the end of the final pole segment you are threading.


Finalize the procedure by connecting the core to the pole’s tip and knot the remaining end of the pole.

Save the money

Tent poles break all of the time, but this does not imply that you must discard your tent and purchase a new one in order to fix the problem. A damaged pole can be repaired by the homeowner. You will be able to fix a damaged fiberglass tent pole without much difficulty if you follow my recommendations.

About The Author

Even while tent poles break on a regular basis, this does not necessitate the removal of the tent and the purchase of a replacement. Fixing a broken pole is something you can do on your own. It is possible to fix a damaged fiberglass tent pole without too much difficulty if you follow my recommendations. : Coghlan’s Fiberglass Tent Pole Repair Kit : Sports & Outdoors

a rating of 2.0 out of 5 stars They’re priced so low for a purpose. On August 10, 2019, a review was conducted in the United States. I bought tent poles of the same diameter as my previous ones, but the ones that arrived were somewhat smaller in diameter, resulting in a gap between the old pole and the new pole when I linked the two together. I was able to utilize metallic plumbers tape to make the smaller pole more tight and fit appropriately by wrapping it in the tape. The threading wire is completely ineffective; instead, simply take out as much of the shock cord as you can and then use a clamp to hold it taught, and you will be able to thread through with no issue.

These are inexpensive because they are inexpensive.

Top reviews from the United States

Verified PurchaseReviewed in the United States on August 10, 2019Verified Purchase I bought tent poles of the same diameter as my previous ones, but the ones that arrived were somewhat smaller in diameter, resulting in a gap between the old pole and the new pole when I linked the two together. I was able to utilize metallic plumbers tape to make the smaller pole more tight and fit appropriately by wrapping it in the tape. The threading wire is completely ineffective; instead, simply take out as much of the shock cord as you can and then use a clamp to hold it taught, and you will be able to thread through with no issue.

  • These are inexpensive because they are inexpensive.
  • a rating of 2.0 out of 5 stars They’re priced so low for a purpose.
  • I bought tent poles of the same diameter as my previous ones, but the ones that arrived were somewhat smaller in diameter, resulting in a gap between the old pole and the new pole when I linked the two together.
  • The threading wire is completely ineffective; instead, simply take out as much of the shock cord as you can and then use a clamp to hold it taught, and you will be able to thread through with no issue.
  • These are inexpensive because they are inexpensive.
  • The photographs in this review On December 24, 2020, the United States will conduct a review.
  • Just make sure you don’t inhale any dust.

To get the cable into the hole, I had to use a flashlight, which I clenched between my teeth (a headlamp would have been a better idea).

Because the provided wire is fairly thick, you won’t be able to perform the usual thing and attach the end of the cord to the wire; instead, you’ll have to just stuff the wire through with the cord to complete the installation.

In addition, the cable is visible.

A thicker material will not bend as readily, but it will last longer; a blind is often kept in one place for weeks or months at a time, and the weight of rain or snow might cause the rods to break, so a durable material is recommended.


Use caution with a hacksaw, as previously suggested, and you should have no problems with splitting or fibers becoming trapped in your fingers.

This is a dreadful situation.

I’m going to keep them and give them a light sanding and a coat of spray paint.

Unfortunately, one of the packets was missing a few parts, which was a shame.

Two stars because they are fiberglass and will work for ME, but they may not be as effective for you as they are for me.

Purchase that has been verified It took years for me to stop being cheap and mend a broken window pole in our cougar flats tent, but I was determined to do it.

Despite the fact that it had a greater diameter than the item it was replacing, it was still functional.

On August 23, 2019, a verified purchase was reviewed in the United States of America.

Make use of masking tape and a fine-tooth hacksaw to complete the project.

Disassembling the parts makes it simple to thread the elastic cord through the holes and tie a fresh knot.

See also:  Privacy Pop Tent How To Fold

This was a complete success.

However, I discovered that the extra fiberglass pole sections are abnormally lengthy.

Before purchase, be sure you measure the length of your tent pole sections.

Verified Purchase Although I cannot comment on how simple it was to install these poles because my husband performed all of the work, our tent pole is now functional again!

However, a little piece of electrical tape fixed the problem. On July 7, 2021, a review was published in the United States of America. There are no directions, but it is quite simple to figure out what to do. However, there should be some sort of set of instructions.

Top reviews from other countries

5.0 stars out of 5 for this product It worked perfectly for mending my Coleman tent poles. On June 24, 2020, a reviewer in Canada noted that the purchase had been verified. In order to repair three broken pole parts on my Coleman tent, I bought these. Although I anticipated they would be too long based on another reviewer’s description, I was able to cut a few inches off the end and then sand it down to perfection, and they functioned flawlessly. The most difficult element was probably getting the elastic chord re-strung through the older pieces of the current tent pole, which proved to be the most difficult.

  1. Very good value, excellent protection for my tent, and I’m confident that they will survive for many years.
  2. The varillas are made of glass fiber.
  3. Purchase that has been verified These varillas were purchased with the intention of replacing a rotted varilla from a toldo with mosquitoes that I had purchased in the United States.
  4. I didn’t have to use any elástico or varilla terminations; instead, I simply had to cut a 10 cm strip from the new varilla and cut away the elástico with some nail pins, then use a hilo and an aguja to reinstall the varillas.
  5. Purchased on September 29, 2019 in Canada and reviewed on September 30, 2019Verified Purchase “It’s a touch short,” the wife commented on the shortness.
  6. It is difficult to locate precise replacement entire poles.
  7. Purchase that has been verified I have a Coleman BP Bristol tent that I use for camping.

We were unable to locate replacement poles.

You need delete the previous part.

Then you manage to either re-insert the old shock cord or use a new shock cord to fix the problem.

You have rescued an entire tent for only a few dollars.

On October 26, 2021, a review will be conducted in Canada.

I believe the wire is intended to be used for threading the bungy through the rods, but simply threading it through the rods works just as well. Metal end caps may be used as tent poles, whilst plastic end caps are simply that.

How to Fix a Tent Pole

The overall rating is 5.0 out of 5. fantastic for mending the tent poles on my Coleman camping tent Purchased on June 24, 2020 in Canada and reviewed on June 25, 2020 In order to repair three broken pole parts on my Coleman tent, I bought these. Although I anticipated they would be too long based on another reviewer’s description, I was able to cut a few inches off the end and then sand it down to perfection, and they worked wonderfully for what I wanted. Finding a way to get the elastic cord re-tied through the older pieces of the current tent pole was undoubtedly the most difficult aspect.

  1. The tents are a terrific deal, and I’m confident that they will survive for many years to come.
  2. This was an excellent purchase for the repair of outdoor equipment that people use.
  3. Purchase has been verified It was with the intention of replacing a rotted toldo with mosquitoes that I purchased in the United States that I purchased these varillas.
  4. I didn’t have to use any elástico or varilla terminations; instead, I simply had to cut a 10 cm strip from the new varilla and cut away the elástico with some nail pins, then use a hilo and an aguja to reinstall the varillas, and it now looks The overall rating is 5.0 out of 5.
  5. Purchased on September 29, 2019 in Canada and reviewed on September 30, 2019 According to the wife, “he’s a bit short.” Addition of an extension has enabled me to pitch a tent.5.0 out of 5 starsThank you for your assistance.
  6. Exact replacement complete poles are difficult to come by.
  7. Purchase has been verified Coleman BP Bristol tent is what I’m using at the moment.

Replacement poles were not available.

These are cut to the same length as the part to be replaced, with the cut end polished a little to finish it off.

And that’s all there is to it.

The rating is 4.0 out of 5.

Purchase has been verified A piece of wire, four rods, a line of item bungy, two metal end caps, two plastic end caps, and a piece of wire are all included in the package.

Though the wire is intended for threading the bungy through the rods, just threading the bungy through the rods is far more effective. For use as tent pole end caps, metal end caps are recommended; plastic end caps serve no use.

  1. 1 Place the damaged pole on a level place and allow it to air dry. This may be accomplished with the use of a portable camping table or picnic table. You may also place the pole on top of a flat piece of equipment, such as a cooler or a toolbox, if you don’t have access to either of these pieces of furniture. The worst-case situation may be solved by placing a smooth rock or a level stretch of ground on the ground.
  • There is no need to disassemble the pole or remove the elastic shock wire that binds it together
  • This is a simple procedure. Clean up any leaves, twigs, pine needles, sand or other similar material from your work surface before you continue. It is possible that if any of these materials make their way onto your tape, they will impair its ability to adhere correctly.
  • 2 Cut a piece of gaffer’s tape the same length as the split part and place it over the split segment. To decide how long a strip of tape you will require, align the loose end of the tape with the extreme end of the segment, then gently unspool the roll until you reach the far end of the segment. Cleanly tear the tape to ensure that both ends are perfectly square
  • Gaffer’s tape is a sort of heavy-duty, high-strength tape that is widely used to repair electrical and mechanical components. It is also known as gaffer’s tape duct tape. You can pick up a roll of gaffer’s tape for a few dollars at any hardware shop or home improvement center
  • If you didn’t bring any gaffer’s tape with you, an ordinary roll of duct tape will enough
  • If you forgot to bring gaffer’s tape, an ordinary roll of duct tape would suffice
  • Tip: This simple, no-frills solution is best suited for emergency scenarios, such as when a pole splits on you while you’re already out in the woods. Advertisement
  • s3 Place the lateral edge of the tape over the split and press firmly into place. Cover the full length of the split with a strip of tape measuring 1 4–1 2inch (0.64–1.27 cm). Depending on the breadth of the roll you’re working with, you’ll have between 1 2 and 11 2 inches (1.3 and 3.8 cm) of reinforcement left over.
  • It is significantly more beneficial to tape a split longitudinally than than merely covering the ends of the split. The greater the amount of surface area on which the tape can attach, the more securely it will clamp the split together.
  • 4 Continue wrapping the tape around the divide until it is completely covered. Fold the tape with care to prevent leaving wrinkles or creases in the fabric. The pads of your fingers can be used to smooth down the strip once you’ve secured the entire strip in place. You are now free to continue erecting your tent without any further concerns.
  • By wrapping the tape in this manner, you will be able to overlap the split itself at least twice while simultaneously tying the remainder of its length. It should be fine to go for the rest of the season, if not longer, if you use the proper type of tape and wrap your pole tightly.
  1. 1 If required, trim or break off the jagged edges surrounding the break to prevent it from fraying. Remove any shards or splinters that are visible extending out beyond the shaft of the segment with wire cutters, or pry them loose with a pair of pliers if they are stuck in the shaft of the segment. This will ensure that the afflicted area has a consistent thickness and that the rough edges do not cause more harm.
  • It’s possible that you’ll have to manually bend aluminum poles back into shape in order for them to fit inside the tent pole repair sleeves that you’ll be utilizing. A large number of aluminum tent poles can be bent by hand, but if you are having trouble, you may try using an arbor press in the same way that you would bend tiny aluminum sheet pieces.
  • It’s possible that you’ll have to bend aluminum poles back into shape by hand in order for them to fit inside the tent pole repair sleeves that you’re going to use. The majority of aluminum tent poles can be bent by hand
  • But, if you are having trouble, you may try using an arbor press in the same manner you would bend tiny aluminum sheet pieces.
  • Most modern tents come with at least one repair sleeve, which allows you to do quick repairs in the field. These are often constructed of an ultra-strong aluminum alloy, which results in a splint that is both durable and lightweight. Alternatively, if you don’t have a repair sleeve available, a tent pole or a stout stick might be used as a substitute.
  • Tip: Although it is not required to disassemble the pole in order to slide the sleeve into position, it may be more convenient to do so. 3 Duct or gaffer’s tape can be used to secure the ends of the sleeve. Strips of 4–6 in (10–15 cm) wide tape should be torn off the pole and wound around the spots on the pole where they emerge from the sleeve’s outer borders. After you’ve applied the tape, you’ll be free to set up and pack your tent as you usually would, safe in the knowledge that the splint will function to stabilize the fracture.
  • Feel free to wrap the tape around the sleeve as many times as necessary to be absolutely ensure that it remains in place. You may even go all the way around the sleeve if you want to
  • Despite the fact that the usual tent pole repair sleeve is durable enough to withstand numerous camping seasons, it’s a good idea to locate a new pole as soon as possible after the incident occurs.
  1. First, look for an identically sized replacement section to use in place of the damaged pole. Some tent manufacturers include replacement parts with their products, such as poles and pole segments, in the initial packaging. It’s possible that your tent didn’t come with any replacement parts, in which case you’ll have to buy a new section from the original manufacturer. If you’re buying an old segment, make sure you measure it across the opening to ensure you’re obtaining one with the correct measurements.
  • You may also be able to locate a specific pole segment that meets your requirements on a website or via a merchant that specializes in old outdoor equipment. Replacement tent pole segments are often constructed considerably longer than conventional tent pole segments, allowing them to be readily trimmed to fit
  • However, replacement tent pole segments are not always made this way.
  • 2 Measure and mark the length of the new section to ensure that it is the same length as the previous one. Place the two segments side-by-side on a level surface with their bottom edges lined and their bottom edges aligned. Use a felt-tipped marker to draw a thin line on the shaft of the new section where the previous segment stops, and then cut along that line. This line will identify the location of the new section segment where you will be performing the necessary alterations
  • Alternatively, you can place a strip of contrasting masking or painter’s tape around the segment to indicate where you want to make your cut. If your poles are constructed of fiberglass, cutting through the tape rather than the exposed shaft may also assist to prevent cracking or splitting. Don’t worry about being too accurate here
  • The goal is to prevent cracking or splitting. Whatever the length of the new segment is relative to the length of the original section, it will perform perfectly.
  • 3 Using a hacksaw, cut the section to the desired length. Orient the pole piece such that the portion bearing the mark you just produced extends beyond the edge of your work surface when you place it at the edge of your work surface. Then, using smooth strokes and steady, moderate pressure, glide the teeth of your hacksaw back and forth over the line. Continue to saw until you reach the end of the segment
  • This will take some time.
  • The opposing end of the section should be held securely in place with your free hand to prevent it from sliding around unexpectedly while you’re attempting to concentrate on sawing. When using your hacksaw, proceed with caution. Despite the fact that they are not very hazardous instruments, an accident might still occur if you are not paying attention to what you are doing.
  • Advice: If you don’t already have one, a small portable hacksaw might be a very helpful addition to your camping kit. 4 Smooth down the rough edges on the cut end of the new section with a file or sandpaper. Following the trimming of the piece to the proper length, all that is needed is to smooth out the new opening with a metal file or a sheet of medium-grit sandpaper to make it seem smooth. A gentle polishing will prevent the elastic shock cord that holds the pole together from fraying once a fresh cut has been made.
  • It is advisable to use sandpaper with a grit that is anywhere between 80 and 120 while doing this activity.
  1. 1 Remove the old cord from the pole by cutting the anchor knots at either end of the pole. Remove the knot from the pole by inserting a pair of needle-nose pliers into the open end of the pole. Cut the rope slightly below the knot with a sharp knife or a pair of scissors, and then wriggle it out of the jointed pole segments with your fingers.
  • When you pull the cable out, be cautious not to lose any of the loose pole pieces that may have come away. Because they’re cylindrical, they’ll be more prone to rolling than other shapes. Due to the fact that you will be dismantling the pole in order to install the new shock cord, now is a good time to replace any pole segments that are showing signs of wear.
  • Tip: Use a felt-tipped marker to number the pole parts, starting with the end that was cut first. Putting them all back together in the proper arrangement will be a piece of cake later on. 2 A knot on one end of the replacement cord will serve as an anchor for the replacement cord. Simply choose a point 4–6 inches (10–15 cm) away from the end of the string and loop it into a basic double overhand knot to complete the look. After that, give the knot a couple of strong tugs to make sure it’s secure
  • A steel washer can be placed on the segment of the rope where you intend to tie your knot if you so choose to do so. The spherical washer will provide something for the rope to bite into and will enhance the longevity of the completed knot, as well as its appearance. Putting a knot on one end of the rope before you start working it through the various segments that make up the pole will prevent it from accidently coming out.
  • 3 Each of your pole segments should have a fresh cable threaded through it. Running the cord through each section one at a time and securing them all together is the quickest and most efficient method of accomplishing this. In most cases, when you purchase a replacement shock cable, it will come with an attachable wire pull-through mechanism, which will assist you in speeding up the procedure somewhat.
  • When pulling the cord through, it may be helpful to have an aide hold each piece for you while you concentrate on pushing the cord through.
  • 4 Remove one end of the cord and tie it off with the pole stretched out to its full length. Once you’ve completed the process of running the new cord through each segment, lay the entire assembly out on the floor. Extend the cord to create some tension, then twist up a second double overhand knot 4–6 inches (10–15 cm) from one end of the cord opposite the one you began with. That is all there is to it.
  • Remember to put a second washer onto the string before tying your final knot if you used one on the first side
  • Otherwise, the knot will not hold. It is important to remember that if your shock cords are connected with metal pull tips rather than anchor knots, you must replace them according to the manufacturer’s specifications.
See also:  How To Temprature Control A Tent

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • To obtain a new pole for your tent while it is still under warranty, get in touch with the manufacturer. Depending on the circumstances, they may even replace the entire tent for a minimal fee. It will be necessary to reshape steel tent poles by a qualified metal craftsman, albeit it may be more cost-effective in the long run to simply purchase a new set of poles. When looking for spare parts for popular tent types, online purchasing platforms such as eBay may be quite beneficial.

Thank you for submitting a suggestion for consideration! Advertisement

Things You’ll Need

  • Gaffer’s tape or duct tape for tent pole repair
  • A tent pole repair sleeve Wire cutters or pliers (as an alternative)
  • Optional: a tent stake or a stout stick (for use as a makeshift splint)
  • Toolkit includes: replacement pole segment
  • Felt-tipped marker
  • Hacksaw
  • Metal file or medium-grit sandpaper
  • Contrast tape (optional)
  • And instructions.
  • Sharp knife or scissors, steel washer (optional), replacement shock cable (optional), hacksaw (optional), and other miscellaneous supplies. Alternatives include: a file or sandpaper. Optional: a felt-tipped marker

About This Article

Thank you to all writers for contributing to this page, which has been viewed 8,606 times so far.

Did this article help you?

Purchases of $100 or more at the Outside Shop, where you’ll discover gear for all of your outdoor excursions, will earn you $50 off your purchase. Sign up for Outside+ as soon as possible. 1. A damaged tent pole, duct tape, and a tent pole repair sleeve will be required ( sells repair sleeves for 75 cents). 2. A damaged aluminum pole would likely crimp and break before it can be repaired. If required, break off metal shreds and flatten the ends until they are small enough to fit into the repair sleeve’s opening.

  1. The processes for repairing a vehicle are the same.
  2. To do a rapid repair at the stroke of midnight, slip the repair sleeve over the damaged pole part, making sure it is centered on the break.
  3. 5.
  4. You may just tape the repair sleeve in place and go back to sleep to accomplish a rapid, one-night repair in this manner.
  5. 8.
  6. Duct tape one damaged end of the repair tube so that it fits firmly into the sleeve and the tape extends all the way to the end of the repair tube’s overall length.
  7. Place the tube in the desired location and label the opposite end.

Wrap the opposite half of the broken end in the same manner as the first half.



If the tape is firmly wrapped around the object, you won’t have to use any extra tape wraps to keep it in place.


When both damaged pieces are wrapped and snugly fitted to the repair tube, the pole arc bends equally and evenly without any pressure spots that might cause the pole to fold again in strong winds.

The significance of the information.

Jennifer Howe/ provided the photographs.

Backpacker Newsletter

Every week, you’ll receive an email with the newest gear, excursions, articles, and other information.

How To Fix Broken Fibreglass Tent Poles

Obviously, this isn’t the best news, but it doesn’t mean you have to cancel your camping trip just yet.

Furthermore, you will not be required to purchase a new tent. Replacement tent poles and a little know-how are all you’ll need to restore your tent poles to like-new condition. Continue reading for a fast and simple advice on how to repair broken fiberglass tent poles.

  • A set of replacement fiberglass tent poles for use with a canopy. If you’re not sure what you’re looking for, go with universal tent poles. A little hacksaw, sandpaper, and duct tape are all needed.

In order to construct your pole, you will need to use numerous loose “pieces” and an elasticated cord (sometimes referred to as a shock cord). The shock cord is simply knotted at each end once it has been threaded through each component from one end to the other. Measure the length of the portion that will be replaced (the new section is generally extra-long, so you may need to cure the new pole down to suit). Making use of a tiny hacksaw, cut the new section (if necessary) to the length of the pole that will be replacing the old one.

Then carefully peel away the duct tape and sand the edges until they are smooth.

Retain hold of the shock cord and carefully remove the pieces one at a time (while maintaining them in the proper sequence) until you reach the section that needs to be repaired or replaced.

You may always shorten or lengthen the shock cord by fishing out the knot in one of the end poles as it becomes necessary.


A nice tent is designed to keep you safe from the elements while you’re camping. Although our gear has remained in good condition over the years, the elements can occasionally take their toll, resulting in damage to our trusted tent that must be repaired. Ripped fabric, leaking seams, and broken tent poles are all routine repairs that can be completed by any ambitious do-it-yourselfer in a short amount of time and with little effort.

How to Repair Ripped Tent Fabric

Sharp pebbles, fallen branches, strong winds, or the heat from a nearby fire can stretch the fabric of your tent past its limitations, leading it to get damaged. A rip or tear as a result of this does not always imply that your tent is no longer usable. It is true that you are now more exposed to the elements, but the damage is completely repairable! In other words, rather of throwing away a perfectly excellent tent, you may quickly and simply repair the damage (and restore it to its former glory!) to your major piece of outdoor equipment!

The following tools and supplies are required:

  • Tools: scissors, rubbing alcohol, a clean towel or rag, etc. Repair tape with tensile strength (for repairing cloth rips)
  • Mesh patch (for mesh tears)
  • Mesh repair kit

1. Cut off any loose threads.

When a tent splits, the fabric often sheds fibers and threads into the surrounding area. These dangling parts must be clipped before the tear can be patched back together. Remove any loose threads by cutting them with a sharp knife or scissors.

2. Cleanthe area thoroughly.

Prior to mending any tears in the tent fabric, it is necessary to remove any dust and dirt that has accumulated on it.

Using a clean towel, dab rubbing alcohol into the rip and the surrounding area until completely clean.

3. Cut and apply repair tape.

Measure and cut two pieces of Tenacious mending tape with dimensions that are approximately one inch larger on both sides than the tear. When cutting the tape, make sure to round the edges to avoid them peeling over the years. Place the tent fabric on a level surface. Remove the backing from the tape and press the tape against the rip. Firm and equal pressure should be applied to the fabric surface to ensure that the adhesive is properly bonded to the fabric and that no bubbles occur. Repeat the tape procedure on the other side of the rip.

In the case of mesh rips, perform the same procedure as before, but use mesh patches instead.

You now have a robust, water-tight patch that will allow you to restore your tent to its former splendor and strength.

How to Fix a Leaky Tent Seam

Tightly woven cloth is bonded together with thread and sealant or seam tape to form a tent-like seam. The reason for this is because seams are frequently the first spot where water seeps through. After years of usage, the waterproof sealant or tape placed to seams may begin to degrade and wear away, enabling water to seep in through the opening. As a result, there are two alternatives for restoring the waterproofing qualities of a seam: You have two options: 1. use seam tape or 2. use seam sealant.

The application of seam sealant is by far the most straightforward and least complex option.

To fix a leaking seam, simply follow these four simple procedures.

  • A pair of scissors, rubbing alcohol, a clean cloth or a rag, rubber gloves, and Seam Grip sealant (which comes with an application brush) are all necessary tools. A respirator (optional if the application is being done inside)

1.Trim peeling seam tape (if required).

If the seam tape on your tent is starting to tear away, use scissors to clip away any loose tape or torn edges.

2. Clean the area thoroughly.

Clean the length of the seam and the surrounding region that has to be sealed with rubbing alcohol using a clean cloth dipped in rubbing alcohol. All that has to be done is treat the inside of the seam on the inside.

3. Apply seam sealant.

Attention: If you are applying sealant inside, be sure to use a mask or work in a location that is adequately aired to avoid inhaling contaminants. In an open garage or outside on a warm, dry, and somewhat breezy day, the perfect situation would be to practice in. Making use of the application brush, apply an equal coating of Grip Seal sealant to both sides of the inner seam throughout its whole length. The sealant will enter into the seam and dry to form a waterproof barrier around the seam joint.

4. Allow seams to dry.

Allow the sealant to dry for 24 hours in a cool, dry location with plenty of air circulation before using.

Say goodbye to dripping foreheads and dripping tent walls! It’s now easier than ever to reseal your tent seam, and your tent will look and perform like new!

How to Repair a Broken Tent Pole – Temporary Fix

Tent poles, which serve as the foundation of any shelter, bear the brunt of the pressures that may be applied to a tent by wind, rain, snow, and ice. Poles can splinter, fracture, or shatter at any time, whether in the course of duty or as a result of an unlucky accident while en route. When camping, a damaged tent pole can be mended using a splint or sleeve made from a piece of cloth. A splint can be fashioned from any solid piece of material, such as a tent post, that is strong enough to support the joint.

The following are the actions to take in order to temporarily repair a damaged tent pole in the field.

  • Duct tape
  • Pliers
  • A tent stake or an aluminum sleeve repair kit (for poles with diameters ranging from 7.9 to 8.5 mm)

1. Unbend and clean the break.

If the tent pole is bent but not damaged, gently straighten the pole as much as you can by bending it back and forth. If there is a break, there may be sharp bits of metal protruding from the surface. Remove or bend these sections of the pole using pliers so that the outside of the pole is smooth.

2. Align and attach the splint or sleeve.

For a splint to hold the broken pole in place, line the damaged pole with a tent stake or any other metal rod. Secure each end of the splint to the tent pole with a piece of tape. Similarly, to attach a sleeve to a tent pole, slip the sleeve over the tent pole. Ascertain that the sleeve is aligned such that it is positioned in the center of the break Secure each end of the sleeve to the tent pole with a piece of tape. These short-term “in the field” remedies should be sufficient to get you through the remainder of your camping excursion without incident.

How to Repair a Broken Tent Pole – Permanent Fix

A better long-term approach would be to replace the broken portion of pole with a new one that could be assembled at home. Simply measure, mark, and cut a new pole to replace the old one and you are done! The following are the measures to take in order to completely repair a broken or damaged portion of tent pole. The following tools and supplies are required:

  • Fiberglass replacement kit
  • Aluminum replacement kit
  • Fiberglass repair kit
  • Needle-nose pliers
  • Locking pliers or binder clip
  • Sand paper
  • Masking tape
  • Permanent marker
  • Hacksaw or pipe cutter
See also:  Fo76 How To Use Survival Tent

1.Unstring existing poles.

To begin disassembling the poles, begin by removing the elastic band that connects the poles together. Pull the knotted end of the chord from one end of the fiberglass poles with needle-nose pliers if the poles are made of fiberglass. To access the knot hook on aluminum poles, remove the end cover and slide it out of the way. Using your fingers, gradually untangle the chord and remove the poles from the chord. Ensure that the poles remain in the proper sequence until you reach the broken pole.

Using the elastic chord

2. Measure and mark replacement pole.

Purchase a replacement kit made of either fiber glass or aluminum, depending on the material of the pole.

Use the broken pole as a reference to measure and mark the new piece with a permanent marker at the same length as the damaged pole. Wrap a piece of masking tape around the mark on fiberglass poles. When it’s sliced, this will assist to avoid sharp edges from appearing on the surface.

3. Cut replacement pole and sand edges.

Make a mark on the new pole and cut it with a hacksaw. After the cut has been completed, use sandpaper to smooth the edges of the cut. When the poles are folded, this avoids any sharp edges from injuring the elastic cord that runs through them. When cutting aluminum poles, a pipe cutter tool produces a far better cut that does not require sanding or other finishing techniques. Insert the aluminum pole into the cutting tool, making sure the mark is aligned with the blade of the cutter. The dial may be used to tighten the blade.

Gradually tighten the blade and continue to spin the tool around the pole until the whole cut through has been completed.

4. Restring poles.

Pull the elastic cord taut while the remaining tent poles are still attached to the elastic chord. To keep that part chord taught, use locking pliers or a binder clip to hold it in place. The leftover chord may now be used to restring the poles in the same sequence as previously, including the replacement pole, using the remaining length of the chord left over. Once the chord has passed through the last pole, knot the end of the chord in the same manner as it was initially knotted. Remove the locking pliers or the binder clip from the binders.

These basic DIY tent repairs are quick and simple to complete; any camper can complete them!

I hope you find these suggestions to be useful in your tent repair endeavors.

It is possible that this post contains affiliate links, which will help to fund this site at no additional cost to you.

How to Replace a Broken Tent Pole

Q. Hey, there, Gear Guy! My two-man tent was being set up for air drying when one of the fiberglass poles snapped as I was putting it up. Are there any sites where I may go to acquire a replacement for my watch? — Half-a-pole Adam from Spokane, Washington. Greetings, Mr. Half. First and foremost, congratulations for thoroughly drying out your tent (cue applause). Taking good care of your equipment is essential if you want it to endure for a long period. After that, I’d like to share a few of recommendations that are special to tent poles: The middle of the foldable tent poles should always be the starting point for assembling or disassembling them.

  • This will place an excessive amount of strain on the elastic within the pole, which may cause it to break.
  • In addition, such debris might get trapped inside the pole joints and cause issues.
  • Your best bet is to get in touch with the company who made your tent in the first place.
  • If it doesn’t work, try returning to the store where you purchased the tent.
  • In the event that you do get in contact, please careful to specify which specific tent type you have and which pole is damaged.
  • It appears that replacement poles may be purchased for as little as $5 to $35 for fiberglass poles, depending on the diameter and length of the pole you want, of course.

Aluminum poles are almost twice as costly as steel poles. While I can’t personally speak for the firm, it appears as though they would be able to assist you.

Help! My tent is broken! – How to fix your tent and repair poles

As a result, your really costly tent is shattered or ruined. What options do you have? We demonstrate a few approaches to assist you in resolving the issue. Any family tent represents a significant financial investment, and when catastrophes occur, such as a bent tent pole, you may be faced with the risk of having that investment completely wiped out from under your feet. Here’s a brief list of objects that have broken, along with the many alternatives you have for repairing or replacing them.

Fixing a bent tent peg

In all seriousness, you are going to have bent tent pegs, especially if you are using the standard pegs that came with your tent. Seriously?!? These tent pegs are very inexpensive and will quickly bend if not handled properly. While it is possible to construct a jig to straighten them, doing so is not recommended. Replacement tent pegs are inexpensive and readily available. However, you should be updating your tent pegs regardless of whether you are camping or not. Read this post to find out what kind of tent pegs you should buy.

Replacing a snapped guy line

Guy lines are generally rather robust, and I haven’t come across one that has snapped yet. However, if this does happen to you, don’t be concerned, because replacement guy lines are readily available online.

Fixing Leaking Tent Seams

What was once a completely dry tent may begin to bleed water via a seam due to a leak. This can occur for a variety of causes, including:

  • The waterproof coating or seam sealant has become ineffective
  • The seam has been stretched beyond its breaking point, and the seal has been compromised. A previously undiscovered fault has just recently become a problem as a result of a change in wind/rain strength and direction.

You should also double-check that the seam is indeed leaking, as moisture in a tent may often give the appearance of a leak. You could even find yourself with a pool of water in your tent if your tent hasn’t been properly ventilated before you set up camp. An additional consideration is that certain poly-cotton or canvas tents may have somewhat leaky seams the first time they are used, since the materialstitching has not yet settled (well, this is what one manufacturer reported anyway). It is simple to repair a little leaky seam.

If you want a more permanent solution, you may acquire some tent seam sealer instead.

Click here to read an article on how to avoid a leaky tent and how to stop the tent seams from leaking.

Waterproofing Your Tent

It is also possible to seek treatment for leaky seams if you believe that water is no longer running off the tent material as it used to, which is something you should investigate further. Even the soapy combination used in your child’s bubbles might be a source of concern for them. Was it ever brought to your attention that laundry detergent might destroy the waterproof covering from your tent? A problem might arise even from the soapy combination used in your child’s bubbles. You may purchase a spray-on waterproofer, which is a convenient item to have on hand when camping.

Although it is considerably more difficult and time-consuming to apply to the entire tent (with the added danger of making it appear ‘patchy’), there are some firms that will do this for you, as well as thoroughly cleaning the tent to make it look as near as possible to its original condition.

Fixing a Bent or Broken Tent Pole

Now, the answer to a broken or bent tent pole is highly dependent on the type of tent pole in question, as well as the location and severity of the damage.

Replacing ‘bendy’ Fibreglass Tent Poles

If your tent is equipped with flexible tent poles (which are normally constructed of fiberglass or a composite material and are typically black or grey in color), they are the easiest to repair and replace.

1. Simple DIY Tent Pole ‘gaffa’ Repair

Most of the time, these sorts of poles are capable of splitting, exposing the inner elastic that binds the various pieces together. The best in-field fix for this is a simple piece of gaffa or duct tape. We’ve done this previously, and the tape really lasted for a few more seasons after that. When you go camping, always remember to bring some gaffer tape with you.

2. DIY Replacement Section

You may also purchase replacements, which can be either full poles or simply a portion of a pole. If you only wish to replace a segment of the pipe, take measurements of the width and diameter. After that, you may find a replacement in the proper size. To re-thread the elastic through, you will need to dismantle the pieces of the pole that were before the damaged pole. Some replacement kits have a convenient pull through that is handy for threading the elastic line through the tent pole.

Replacing Steel Tent Poles

It is possible to straighten a bent steel tent pole if it is a straight portion and it has not been bent too far out of shape; however, this is not recommended. But if that isn’t possible or if the tent pole is formed, it is preferable to take it to a metal craftsman with a non-bent pole that is identical to the bent pole. The metal worker will be equipped with equipment that will allow him to quickly return the pole to its original shape, as well as the ability to heat the pole if necessary to avoid straining the metal.

2. Replacing the bent pole section

When it comes to poles that can’t be replaced, your options are quite restricted. There are occasionally some replacement poles available for straight portions, however most steel tent poles are made to a specified form for the tent type that you have purchased.

3. Contact the retailer

The first thing I would suggest is that you contact the store where you purchased it, and if that is unsuccessful, you should contact another retailer who carries your brand of tent. Some merchants may have a few extras on hand, or they may have some old stock that they are willing to sell you. Of course, depending on the part, this may entail a modest premium over the standard rate.

4. Contact a spares supplier

Tent spares are only available from a few providers that offer a repair service. One such service, a specialised outdoor repair service such asScottish Mountain Gear, which is one example of this type of service. My own experience with their service is limited (thank goodness! ), but I am aware of a few other people who have had positive experiences with it.

5. Contact the Manufacturer

It is uncommon that contacting the tent maker is effective. They send a lot of goods out to shops and don’t keep spares on hand, and they don’t keep stock on hand to assist consumers directly. unless they sell tents directly to the public, in which case there’s a chance they’ll have some on hand. You may also anticipate that the manufacturer will not be able to repair a single tent pole but will only be able to deliver (sell) you a whole set of tent poles because this is what is left over from their manufacturing run.

This might end up costing you almost as much as purchasing a brand new tent.

6. E-Bay

For popular tent models, there is a considerable second-hand market to choose from. While the expense of purchasing a second-hand version of your tent for the purpose of replacing a pole may seem extravagant, it may still be less expensive than other alternatives. Keep an eye out on the second-hand market for any more tents that may be available as spares. Somebody else’s tent may have been damaged, but it may have been in a different place, and you will be able to pick it up for a far lower price.

Repairing a Ripped Tent

A ripped tent does not necessarily imply the end of the least not if the rip is not too severe. When you are camping, gaffa tape will come in handy if you have a little rip. In case of an emergency, you may also purchase tent repair tape to use in the meanwhile. Cover the area with a tarp if you need to make an emergency repair to a larger rip — you do have a tarp, don’t you? (read this). Some tents include some repair cloth as well as some glue for minor repairs (and a few with a self-adhesive patch).

If your tent does not come with a patch, you can purchase one from a store; however, the color of the patch may not match the color of your tent.

If you require anything further, you may need to call a local tent repairer (whom your local camping shop may be able to recommend) or look into purchasing a used tent.

Useful items for DIY Tent Repairs

Here are some tools and supplies you may use to repair your damaged tent on your own. GorillaTapeIdeal for making quick repairs in an emergency. Outwell The Luminous Guy Line is a line of clothing that is brightly colored and stands out from the crowd. VangoGuy Line is a transportation company that specializes on vangos. There are a variety of colors to choose from. OutwellDurawrap These are available in a variety of sizes. Outwell Steel Pole with a Straight Base These are available in a variety of sizes.

  1. VangoFibreglass Pole is made of fiberglass.
  2. McNettSeamSure For the purpose of repairing leaky seams McNettSeamgrip It is used for mending seams that have fallen apart.
  3. Patches of McNett’s tenaciousness For bigger holes in your tent, use a tent sealant.
  4. NikwaxTent It is possible to purchase them in either spray-on or bigger sizes.
  5. Photos courtesy of Thomas Guest.

Get the Family Camping Planner

You will receive the family camping planner once you have entered your name and email address.

Leave a Comment

Your email address will not be published. Required fields are marked *