How To Have A Small Grow Tent To Stagger Grows

The Perpetual Harvest: How to Grow Unlimited Weed!

Submitted by Sirius Fourside Once you become familiar with a variety of growth techniques, they become second nature to you. For example, if you learn that exposing more of the cannabis plant to light results in the production of more buds, low-stress training appears to be a simple choice to make. This week, we’re going to talk about something that many novice growers may not be familiar with: the Perpetual Harvest. The concept of the Perpetual Harvest is quite straightforward, and it may not seem like much to go through, but it is one of the most effective techniques of insuring a consistent supply of cannabis whenever you want it!

A hobbyist grower will never run out of cannabis thanks to the Perpetual Harvest!

Immediately following harvest, the vegetable plants are transplanted to a new location, and the farmer begins work on the next set of plants.

Stunning photograph taken by marijuana farmer Manzfoo What is the Perpetual Harvest, and how does it work?

  • Anyone who wants to do this must be insane, because it sounds like a lot of effort.
  • If you lose your blooming or vegetating plants due to an unanticipated circumstance, you will still have a second set of plants that are already in the process of growing!
  • Perhaps you already produce your own marijuana, but you find yourself running out on supply from time to time.
  • Using a Perpetual Harvest system, you may ensure that you’re continually establishing new plants and harvesting them on a regular basis.
  • Whatever the reason, whether the local shop closes or your connection relocates, you typically have no indication that your cannabis supply will be cut off until it has already happened.
  • Some growers, who don’t have a lot of room, will divide a single area into two portions to maximize yield.
  • Although extensive plant training and the use of aScrOG net were required to guarantee that plants remained tiny enough to fit, the farmer has found that he is now able to harvest more frequently as a consequence.

If you want a large or little Perpetual Harvest, that is all up to you.

The grower begins by starting with a large number of immature plants beneath a modest grow lamp.

It is at this moment that the grower begins work on the following batch of plants.

Right as these are being picked, the next batch is ready to be transported into the blooming room.

Those same plants are shown here in more natural light.

This grow made use of theSea of Greenmethod (growing a large number of little plants rather than a limited number of large plants), which can assist grow times be reduced.

It is necessary to maintain two independent growing environments, hence the short answer is “yes.” However, if you want a greater quantity of marijuana from a reliable source, the advantages of using this strategy exceed the increased expense and time required.

In order to accomplish this, you will need an additional grow tent or space, whatever is more convenient for you.

Another set of grow lights has been purchased.

Because juvenile marijuana plants do not require as much light as mature marijuana plants, the vegetative light may be dimmer than the blooming light.

Learn more about the differences between MH and HPS grow lights.

You’ll have nearly twice as many plants growing as before, which will take up more room and increase your electrical bills.

For the duration of a normal cannabis grow, how much money will I spend on electricity?

Despite the fact that caring for two sets of plants takes more time than caring for one, you may get into a routine and find it incredibly gratifying if you love spending time with your plants!

You must desire a large quantity of cannabis in your possession.

If you use a Perpetual Harvest method, you will almost certainly end up with more cannabis than you require.

However, this might be an excellent time to experiment with things like as the production of edibles, hash, cannabis capsules, cannabis oil, magic butter, and other extracts.

You only want to support one cannabis grow space at a time?

Learn how to harvest continuously on “Training Wheels” without the use of a separate vegetable and flower chamber.

Let’s get this party started! Step 1: Create Your Very Own Secret Garden The first and possibly most critical step is to ensure that you are capable of conducting this sort of grow in a safe manner! Make sure to adhere to basic safety procedures and keep the following points in mind: 1.

  • The fact that you have cannabis growing in your house all of the time implies that you must be always vigilant about keeping security. Learn how to avoid being apprehended when growing weed. Given that you’re going to be employing at least two grow areas/tents, take a trip around your house and check to be that no light is pouring in through the windows of the room(s) where they’ll be located. Increasing the number of grow areas by two implies you have twice as much land to protect. What part of the home should you grow your plants in? How to put up a grow tent
  • Examples of various cannabis growing setups (as well as the yields that might be expected)

Step 2: Construct your two growing spaces. According to the grower, the growing space available, and the resources available, each grow area will be set up individually. Briefly stated, your aim for setting up your grow environment is to have two copies of your typical grow environment, with the exception that one grow area is designed for vegetative growth and the other is prepared for blooming development. In order to have a continuous harvest, two grow zones must be operational at the same time.

Here are some crucial considerations when putting together a Perpetual Harvest system: Space for Vegetative Growth

  • Because the vegetative plants will be smaller, the vegetative area might be reduced in length or reduced in size. This section may also have poorer lighting than the blossoming area
  • However, monitoring for light leaks isn’t as critical because a dark phase isn’t necessary for optimal growth in this area. Consider cultivating a large number of little plants rather than a few large ones. This assists in shortening the vegetative stage while yet allowing for adequate filling of the growing area. Despite the fact that most plants do not produce much odor (if any) when in the vegetative stage, it is a good idea to have the space at least partially prepared to battle smells during this period. If you notice a slight smell coming from your vegetative plants, a small carbon filter or even a container of Ona gel in your living space (but not in the tent) should suffice (just remember not to use Ona gel or other “perfumey” products near your plants during the flowering stage as they can affect the small of your buds!).

It is not necessary for a vegetative grow area to be as vast as a blooming grow space. Flowering Plant Growing Area

  • The blossoming region MUST BE LIGHTPROOF, which means that no light may get through or out. Light leaks can cause stress to your blooming cannabis plant, preventing buds from growing properly, causing your plant to revert back to the vegetative stage, or even causing your plant to become a hermaphrodite (male and female reproductive organs). It’s crucial to keep the temperature under control throughout the flowering period in order to get the optimum development while preventing bugs, mildew, and damage to the buds. Temperatures that are too hot or too cold during the flowering period might significantly reduce your output. Additionaly, extremely high temperatures can result in foxtails and loose buds. High temperatures can also “burn away” some of the cannabis smell, making the plant less offensive once it has finished curing. Controlling scent becomes extremely important during the flowering stage, as your buds will become stinky with most strains. When it comes to reducing odors, nothing beats a carbon filter, but you do have a few other alternatives. More information about managing cannabis scents in the grow room may be found here: Learn what you need to do to set up the ideal cannabis growing environment, including how to: These cannabis plants in their vegetative stage have only recently been transplanted into their blooming chamber. When compared to their previous location, this facility offers significantly more light and loads of more space, allowing the plants to grow to their full potential. Step 3: TimingKnowing the development habits of the strain(s) you’re producing is important in determining the best time to harvest your Perpetual Harvest crop. When it comes to marijuana strains, there is a great deal of variance in their flowering cycles, so understanding how long your plants will take to finish blooming is critical! It is preferable to have a strain that has a brief flowering period so that you may harvest more frequently. Because many excellent strains blossom in 8 weeks or less, an 8-week flowering stage is a reasonable goal to shoot for, and 8 weeks is also a reasonable amount of time for a plant to vegetate in a non-DWC/bubbleponics medium.
  • Making use of the Perpetual Harvest approach with a long-flowering strain (such as many Sativas) is significantly more challenging because of the amount of time they will take up your blooming tent. Learn more about cultivating Sativa strains that are difficult to cultivate indoors.

Do you have to go into a state of vegetative state for eight weeks? No. Vegging for eight weeks is not required for the permanent harvest approach, although doing so makes the process much simpler. The length of time required varies based on the medium used, the size you want your plants to reach, and the strain being cultivated in question. However, in the majority of situations, and to make things easy for yourself during your first few attempts, you should go for a strain that blossoms in 8 weeks or less and maintain your plants in vegetative for around 8 weeks.

  • This is a dilemma for DWC/Bubbleponicsgrowers since their plants grow at an alarming rate and can become GIANT during this period. Even if you use one of these media, you can still follow the approach by staggered growing your plants such that the new seedlings begin to vegetate after the elder plants have finished flowering for around 4 weeks. When growing long-flowering strains, such as a 12-week strain, gardeners should consider putting up a somewhat wide space for the vegetative stage in order to be able to partially blossom in it during the vegetative stage. After 8 weeks of dormancy, you may turn on the lights on 12/12 and give your plants their first 4 weeks of flowering while still in the “vegetative” environment. At that time, you may move them to the blooming tent, where they will have 8 weeks remaining until you can start the next group of plants. Harvesting every 12 weeks, rather than every 8 weeks, would result in a higher output of bud each time (long-flowering strains tend to produce larger yields than short-flowering strains)
  • Nevertheless, this would result in a lesser yield of bud each time.

It’s time to put it all together, or “I want the shorter version!” Here’s how those steps are summarized. 1.) Conduct a thorough security check of your surroundings.no, honestly!

  • Or, “I want the shorter version!” Putting it all together. Here is a summary of the stages. First and foremost, do a thorough security assessment of your surroundings.no joke!

2.) Create two distinct growing environments.

  • One vegetative area (which can be smaller if the lights are dimmer and the odor control is mild)
  • With extensive odor control and NO LIGHT LEAKS, there is just one flowering area.

3a.) Begin harvesting in perpetuity.

  • Acquires seeds or clones of a strain that has a blooming time of around 8 weeks. Learn how to select the best strain for your needs. Plant/clone the first plant and allow it to vegetate for a total of 8 weeks in the vegetative tent/area
  • Second, plant/clone the second plant and allow it to vegetate for a total of 8 weeks in the vegetative tent/area
  • Third, plant/clone the third plant and allow it to vegetate for a total of 8 weeks in the vegetative tent/area
  • Fourth, plant/clone the third plant and allow it to vegetate for Week 8, transfer the plant(s) to a flowering tent and start additional seeds/clones on the same day as the existing ones. Blooming plants will be ready to harvest in around 8 weeks, and vegetable plants will be ready to begin flowering in approximately 8 weeks.
See also:  How To Get Stains Out Of Canvas Tent

(3) Reset the Perpetual Harvesting system.

  • Obtain your buds
  • Transfer your vegetative plants to the blooming tent or area
  • Planting fresh seeds or clones in the vegetative tent or area is recommended. Wait 8 weeks and then restore your Perpetual Harvest to its original settings. Continually repeat this cycle for as long as you like, harvesting buds every 8 weeks if necessary

Transfer vegetative plants to the blooming tent/area; harvest your buds. Planting fresh seeds or clones in the vegetative tent or area is also recommended. Perpetual Harvest may be refreshed once every 8 weeks if you wait that long. Continually repeat this cycle for as long as you like, harvesting buds every 8 weeks if necessary.

  • To maintain plants short such that there is less of a variation in height between the tallest and shortest plants, training is used. Making use of buckets or some other item to lift the smaller plants so that they are constantly at the proper distance from the grow light Keep younger plants that need less light near the perimeter of the tent, then move them closer to the center when they start blooming and need the maximum amounts of light for bud development

Despite the fact that this is not a “real” Perpetual Harvest arrangement, you will still end up with a limitless supply of cannabis and the ability to harvest as frequently as you like! In terms of strength, autoflowering strains are on par with or even more potent than standard photoperiod strains, and many beginning cannabis producers find that cultivating autoflowering plants can make things a bit easier because you don’t have to worry about light schedules as much. Find out more about producing cannabis using autoflowering strains by reading this article!

  1. Having learned how to operate a permanent harvest, it’s time to invest in the equipment you’ll need to keep things operating smoothly.
  2. Lights for growing: Make sure you have two sets!
  3. Check to check that the blossoming tent is entirely light-proof before using it.
  4. This strategy will cause you to go through nutrients twice as quickly as you would otherwise.

Go to the next page. A 10-Step Guide to Getting Started in Growing Cannabis-Related Issues Symptoms Indoors, there are five ways to increase yields (with any strain) Guide to Increasing Yields with Cannabis Grow Lights Potency is explained in detail.

Small Tent, Perpetual Monthly Harvest, Auto-Flower Grow Journal (canna, coco, LED)

At the start of the process. I took one of each of Nirvanaauto Blue Mysticandauto Bubbleiciousseeds out of my fridge storage a couple of days ago to let them to warm up to room temperature before using them. On Sunday morning, I placed them in shot glasses filled with Ph’d, filtered water to soak. I filter my tap water using a Brita water filter and use Ph Down to modify the pH of my water. Finally, I planted them yesterday night, after the seeds had been soaking for around 9 hours. I’m utilizing a tip I discovered from someplace on the internet, which is to plant your solo cup with the bottom cut off in your larger pot, and then water it.

  1. In order to make it easier to remove the solo cups later, I clipped the bottom of each solo cup twice and indicated the locations of the snips with a marker (2 snips opposite one another).
  2. Once the solo cup is in two pieces it’s easy to pull out and your seedling has been re-potted with the exact minimum of pain.
  3. I’m making use of a coco/perlite mixture.
  4. The fabric pots are off-brand “smart pots” that hold three gallons of water.
  5. This was probably superfluous, but I wanted to prime the medium because Cannazym is known to be beneficial for reusing coconut oil.
  6. I configured my light timer for a 20/4 light cycle, which means it will turn on at 6 p.m.
  7. My intention was to leave it in the “off” position overnight so that the seeds would enjoy nearly a full day of darkness before the lights were turned on this morning.
  8. The goal is to give the plants a head start by providing them with a little reduced light intensity for the first few days.
  9. The only thing you can do in life is to be who you truly are.
  10. Most people will admire you for what you can accomplish for them, but some people will despise you completely.

Staggered harvests or one huge grow?

You are currently using an out-of-date web browser. It is possible that this or other websites will not show correctly. You need either upgrade your browser or switch to another one. Hi, This is my first post. I’ve been lurking for quite some time. I hope everyone is having a good day. In my garage, I have a 10x10x6.5 box with three 1000w lights in it. The middle of my first grow has me unsure of how to think about harvests, and I’m not sure I’m thinking about them appropriately. The initial intention was to have three independent grows going at the same time and stagger the harvests such that one would be harvested every 20 days or so.

  1. It also makes it impossible for me to provide 36 hours of pure darkness before converting to 12/12 because there’s always a grow going on in there and the separate veg tent requires 24/0 light at all times.
  2. What are the potential drawbacks of using the stagger approach that I’m not considering?
  3. I’m pleased to say that I’m now a contributing member.
  4. I used three 1000-watt inverters and tried to space everything out so that I could harvest every 21 days.
  5. I have been vegging my plants to 30″ in height and cramming them into the blooming area, which has been a lot of work.
  6. It also makes harvesting much more manageable because I’m just collecting 1 to 3 plants per day instead of the entire field.
  7. I’m now growing with four 1k bulbs in a staggered fashion.

Every ten days, I intend to plant a new batch of four plants.

In a separate closet, I can grow batches of four plants for up to 60 days at a time.

On the other hand, I can cure one batch at a time on the rear side, which is where I have the same problem.

As a result, I don’t have to wait for the next batch to dry before putting it in.

The fact that one of my batches is usually new and smaller means that I have a bit more space for the older batches.

I was able to resolve the difficulties I was having with many batches by using some very inexpensive equipment.

I was able to resolve the difficulties I was having with many batches by using some very inexpensive equipment.

Please do so, or alternatively, create a new thread.

Attempting to harvest every 6 weeks is the goal.

I’m constantly on the lookout for better procedures or ways to make things simpler.

1 600W HPS for flowering, and 1 105W T5 for vegetative growth.

Approximately one week before I put the veg plants into flower, I take clones.

It’s reassuring to know that I’m not alone in my quest for continuous improvement.

Each can contain a total of ten 6inch cubes.

There will be plenty of time for the girls to properly root the cubes and room for them to grow to be more than 2 feet tall.

Typically, these are placed on shelves or milk crates.

The tubs are plumbed in pairs, as follows: The tubs (milk crates) are positioned at various heights to ensure that the canopy is evenly distributed.

The res are located in a separate room adjacent to the sink: I can move the trays in and out of the way while I work on the plants since I am using a large number of little trays.

Because they are not in the grow chamber, there is no excessive humidity.

Once they have been in between the lights for 50 days, they will relocate to the side of the road.

Another advantage of working in small groups is that it reduces the effect of any problems I may have encountered while putting the space together.

I’m just relocating the plants from the 18th of June to the 12th of December.

My fourth light will be turned on for my next cycle.

I’m now vegging out with 8 BKs behind some more OG Lemon Kush.

Eventually, I plan to do some significant structural renovations to my space in the following year, at which point I will be able to replace my equipment, but for now it is performing its job and I couldn’t be more pleased with the outcome.

It’s reassuring to know that I’m not alone in my quest for continuous improvement. Here are the fundamentals of what I’m doing: In my vegetable closet, I have three 125watt compact fluorescent lights: It’s a really excellent setting. Prairie

Similar threads

If you’re a cannabis enthusiast, you’re definitely looking forward to getting your hands on some freshly cut buds whenever the opportunity arises. Depending on your arrangement, you may be able to harvest as frequently as you like. The ability to set up everlasting cycles makes every step of growth easier to handle, whether you are growing at home or working at a large-scale marijuana production facility. How to organize your grow rotations such that you always have a harvest just around the corner is covered in this article.

Why Maintain Perpetual Harvests?

Why would someone wish to sustain eternal harvests, other from the apparent reason of having a continual supply of weed? Because there is a continual flow of work in the harvesting area, you are not required to do it all at once. To put it another way, the labor of picking one plant every week is far less taxing than the labor of chopping down a whole garden every month or two. Rotating cycles are often achieved by arranging separate grow tents in such a way that each tent includes plants at various stages of development.

In the event that something goes wrong, the likelihood of losing the entire crop is reduced significantly.

  • Complete control over each step of development
  • Increasing the number of harvests every year On harvest day, there will be less labor. It is simpler to deal with difficulties.

How Often Should You Harvest?

The frequency with which you harvest is determined by your objectives as a farmer. In the event that you are under pressure to produce a large amount of cannabis, you may want to spread out the job by having a few more tents so that you may collect more weed more frequently. Commercial grows frequently include a great deal of effort, and it might be beneficial to divide the workload rather than having to cope with a single large harvest. The greater the number of tents or growing places you have, the more frequently you can harvest.

Of course, as the number of grow tents increases, the amount of equipment required increases as well, making the installation process more expensive.

It also helps to be aware of the blooming periods of your strains as well as how long you intend to maintain them in vegetative state.

Autoflowers, on the other hand, may all be grown in the same tent, allowing for continuous harvests because the light schedule is less critical than it is for photoperiods.

Setting Up A Perpetual Grow

It is necessary to establish a separate place for each stage of growth in order to accomplish eternal cycles. Seedlings, vegetation, and blooming all demand different environmental conditions, so having three separate places where you don’t have to continually modify light schedules, temperature, or humidity makes sense. It is preferable to have your vegging plants ready to blossom at the same time as you harvest flowering plants so that they may be transferred into the flowering room as soon as possible.

See also:  When Is It Too Cold To Camp In A Tent

The cycle continues indefinitely.

Start the cycles in the order in which you intend to harvest your crops.

By using everlasting cycles in your planning, you may at the very least quadruple the number of harvests you receive in a given year. This more than compensates for the additional expenditures.

Clones/Seedlings

A number of essential parameters must be met before clones and seedlings may get started to a successful beginning. Although they may be planted in the same room as your vegetable plants, it is preferable to keep them in a different area so that you can properly care for them and monitor their progress. Despite the fact that they do not require much space, having their own area ensures that the circumstances may be tailored to fit their particular requirements without interference from other plants.

Keep in mind that the larger the space, the more difficult it is to maintain control, especially if it is filled with plants at various stages of development.

For example, you may be cultivating four different strains and have ten clones of each of those strains.

clones and seedlings benefit from cold lighting such as CFLs, which may be put on a 24/0 or 18/6 schedule, or anything in between, to keep them healthy and growing well.

Vegetation Room

Thevegetation roomis meant to maintain your plants on a consistent18/6 schedule till they reach the size of flowers. When compared to their eventual size, your plants will still be little, so make your preparations accordingly. After being moved into the blooming chamber, cannabis plants can grow by as much as two or three times their original size. A cannabis plant grown indoors typically spends around 4 weeks in the vegetative stage before transitioning to the flowering stage. This is very dependent on the strains you are growing, as well as whether or not you use any training tactics to restrict their growth during the growing process.

Flowering Room

You may program your blossoming chamber to have 12 hours of light and 12 hours of darkness. The most crucial element to consider is that the room is completely walled off from light, as you do not want your plants to accidently revert back to their natural state. Once you have relocated your plants to this location, they will be able to remain there for the remainder of their lives until harvest. To give you a sense of the dimensions of a 1×1 meter grow tent, around 9 medium-sized, fully flowered cannabis plants may be accommodated comfortably.

Nº Plants 1x1m Tent Pot Size
Seedlings 16-32 3 – 5l
Vegetation 9-16 11 – 15l
Flowering 1-9 11 – 21l

Remember to start your fresh clones or seeds 3-4 weeks before harvest so that you have some plants to put in your vegging room once it is no longer needed for growing.

To avoid the transmission of possible pests or fungus, thoroughly clean your grow rooms between each transfer, as described above.

Autoflowers

Using autoflowers to fill up spare space around your grow rooms is an excellent idea. They are also excellent for ensuring continuous harvests, as numerous plants may be grown in the same tent under the same lighting conditions, but each will be at a different stage of their lives than the others. Alternatively, you may put up numerous tents and divide autoflowers into groups according to their stage of development. In any case, an autoflower has a short growth cycle and requires less maintenance than a photoperiod strain, allowing you to produce large quantities of marijuana in a short period of time while maintaining consistent harvests.

Conclusion

It may take some practice to get the rotation just perfect, but the most important thing is time. As you get more knowledge about your strains and how to grow them properly, your timetable will evolve to meet your specific requirements. Just keep in mind to be realistic about how much cannabis you’ll need and how often you’ll need it. Do you think you’ll keep growing indefinitely? How you set up your cycles would be really interesting to us to know about. Share your thoughts with other gardeners by leaving a comment in the section below!

External References

Cannabis sativa L. is undergoing vegetative development. Cultivars in Jamaica that are grown under an 18/6 photoperiod. Emanuel, MachelHENRY, ValrickRobinson, Dwight. International Journal of Plant Science and Horticulture.- Emanuel, MachelHENRY, ValrickRobinson, Dwight (2020)Chemotaxonomy of Cannabis I. Crossbreeding between Cannabis sativa and Cannabis sativa L. (Chemotaxonomy of Cannabis II. Ruderalis, along with an examination of its cannabis content. John Beutler and Ara Marderosian’s Economic Botany is a work of fiction.

Drying in tent and taste of the flowers

Hello there, I hope everyone is doing well. I am now completely immersed in the process of cultivating my own medication at home. My 44 tent was successfully put up, and the surrounding atmosphere was perfectly calibrated, thanks to DGC’s assistance. *** Thank you SOUP and LitnGrn for your assistance. *** I’m hoping to convert an old 2x2x4 vivosun tent into a drying tent for the time being. I did this with my most recent harvest, and the buds were still dry in around 6-8 days after curing for at least 2 weeks.

  • It’s possible that this is related to genetics.
  • Is this a nutritional deficiency problem?
  • I was wondering whether drying the plants and then growing them with a charcoal filter would make the taste weaker.
  • But, with this community, I’d like to know whether or not your own personal experience makes a difference.
  • However, there is no flavor.
  • This helped a lot with the taste of my bud, however I believe it was dried too quickly or at the wrong temperature and relative humidity.
  • In the top of the tent, I have a 205 cfm (set to medium) fan that pulls air out into a filter, and then a little 6in fan that circulates air within the dry area without pushing air into the buds.
  • As of right moment, the temperature is hovering at 70-75 degrees, which I realize is too high for Drying, but I don’t have a method to properly cool it down other than drawing in ambient air from the room.

Thank you for your suggestions, and please accept my apologies for my rambling. Before writing this, I took a big swig of something strong. Friends, please continue to be irritable.

3 Tips for Better Canopy Management

Jacob Kepler took the photographs. The presence of spine experts and neurosurgeons does not make Priscilla Vilchis feel out of place in a room full of people. As a medical practice consultant, Vilchis supervised some of Southern California’s most prominent physicians while still in her twenties, assisting them in navigating regulations and negotiating with insurance carriers. She attributes her self-assurance and knowledge of the cannabis sector to her previous work in the cannabis industry. Whenever I sat at the table, Vilchis adds, “I treated myself as though I were on an equal or higher level than everyone else.” “I followed through on what I stated I would do.

“I believe that is a significant component in gaining respect.” Vilchis, who is now 31 years old, is the owner and CEO of Premium Produce, a medical and recreational cultivation and processing company with operations in Las Vegas, Nevada, and Lynwood, California, as well as additional delivery and distribution licenses in the state of California.

She was the first licensed female minority in Los Angeles County and the youngest female minority to be licensed in Nevada, and she was the first licensed female minority to be licensed in California.

“Well, that’s quite straightforward,” she adds.

The crops are watered by hand by the company’s staff, allowing each plant to get personalized attention.

Convincing the Skeptics

Vilchis emits a sense of royal assurance. She speaks in a soft but firm tone, her voice impassioned yet collected, as if she were speaking to a friend. She states her goals in a clear and concise manner, and she provides specifics on how she intends to achieve them. It’s no surprise that one of her best assets is her ability to advocate for herself. She is competent at persuading county boards and municipal councils to place their faith in her when it comes to cannabis company licensing, to the point that they have requested her assistance in persuading hesitant members of the community.

  • As a result, she is particularly effective in minority-majority neighborhoods, such as Lynwood.
  • Laughing, Vilchis recalls his mother’s brutality when he was in his early teens.
  • According to Vilchis, the majority of youngsters from minority populations, particularly Latino ones, are reared with a fatalistic attitude toward marijuana.
  • Many of them are unaware that CBD is being administered to children suffering from epilepsy, and that it is assisting them in their daily lives, according to Dr.
  • The persuasiveness of Vilchis persuaded Premium Produce’s head horticulture expert, Nathan Race, that joining Vilchis’ initiative was the best choice for Premium Produce.
  • Vilchis is a British Columbia native with more than 15 years of experience working in the medical cannabis industry.
  • “She told me about her career objectives in the sector, and I told her that I would be delighted to share my knowledge and experience with her,” he recalls.

“Working with her has provided me with a lifelong understanding of how to function.” The fact that she has a special zeal for getting things done has stood out to me from other people I’ve observed in other businesses and also in the cannabis market, both in the United States and Canada.” Vilchis’ concept came close to becoming a reality because of his enthusiasm, which was vitally essential.

Her coronation may have been postponed had it not been for a phone conversation and a split-second decision made while she was in Italy.

Cutting It Close

It was long before the deadline of May 31, 2017, when Vilchis submitted her application for her cultivation and production center in Las Vegas: It was just a few months after the state passed legislation governing the sale and distribution of medical marijuana that she began the application process. Over the following three years, she made all of the correct decisions, including arranging for the bank to close on what she describes as the “ideal” property and instructing her staff on how to conduct the next phases of the transaction.

  • It was at this point that the wheels came off.
  • During the night, she received a phone call from her attorney, who roused her from her slumber.
  • “Can you explain what you mean?” she inquired.
  • Cash.
  • The fact that our industry is still in its infancy is demonstrated here.
  • “Our goal was to attempt to obtain a lease.” I’m now relieved that I didn’t go through with it.

Building for the Future

Premium Produce, in addition to its $2 million investment in a Las Vegas site, has made an additional $8 million investment in a Nevada manufacturing plant. And what does $8 million get you in Nevada? Not much, really. “It’s a cutting-edge facility,” Vilchis describes it. Premium Produce’s facilities are equipped with a Link4 environmental control system that was specially built for the company. In order to acquire and install the system for the Las Vegas location, which has more than twice the square footage of the Lynwood plant, the corporation had to spend more than $1 million dollars.

It also incorporates automated louvers to control airflow; monitors the irrigation system to alert staff when parts per million (ppm) levels are too high and filters need to be changed; and connects to light sensors, which notify the team when a light bulb in the grow room needs to be replaced before the lighting levels in the room become uneven.

  • Race will be able to gradually increase the brightness of the lights, avoiding the creation of big electrical spikes.
  • A 1,000-watt setting is used during blooming for the hybrid high-pressure sodium (HPS) and metal halide (MH) lamps (made by the Canadian company, P.L.
  • “We reduce the power of our ballast to 600 watts during vegetative seasons in order to conserve energy,” Race adds.
  • After consulting on numerous large-scale grows around North America, Race saw a number of less-than-ideal CO 2system configurations, including several in which highly pressurized carbon dioxide bottles were simply connected to racks in high-traffic halls.
  • It keeps track of the quantity of CO2 that is being supplied to the plants and makes adjustments as needed.” “We have an actual air gas cylinder that is monitored remotely for pressure and the amount of air gas it contains,” says the engineer of the safety features.
  • Vilchis, according to Race, was different from most other CEOs he’d dealt with since she collaborated extensively with him to learn the subtleties of the cannabis production industry.
See also:  How To Stake A Tent On A Platform

In addition, “it’s really uncommon to have a CEO inquire about the type of polymers you’re using.” Having a long-term perspective is another characteristic that distinguishes Vilchis from the other cannabis growing business owners Race has met, particularly in terms of the company’s commitment to environmental sustainability.

In the words of Race, “At the end of the day, we’re producing marijuana in the desert, and every drop of water we have is valuable.” Another illustration of the firm’s long-term emphasis is its in-house testing process, which enables the company to test its goods for potency and contamination while maintaining strict quality control.

Vilchis, on the other hand, is OK with the investment since the last thing she wants is to have a failed test on her record. “We absolutely aim to put only high-quality items in the hands of our customers,” she says.

Something Old, Something New

When it comes to growing a quality product, it is sometimes necessary to do things the old-fashioned way. Large swathes of the manufacturing process, such as watering, are still done by hand in spite of a roughly $2 million investment in automated control systems for both facilities When it comes to automated feedings and waterings, Race feels that there is a danger, specifically system mistakes or breakdowns, as well as staff who disregard system maintenance responsibilities. “What we do is.

  • We can tell if there have been any hermaphrodite weird anomalies, any kind of pests or deficiencies that the plant has because they inspect and chart the plant every day.
  • They are: There are three people working on the farm: Race, a cultivation manager, and an organic cultivation specialist who, in addition to assisting with daily watering and feeding, is in charge of establishing the company’s organics program.
  • Race relates the nutritional requirements of various cannabis cultivars to the food choices of different humans.
  • The majority of Premium Produce’s research and development efforts are focused on the company’s manufacturing operations.
  • This manner, Race continues, “we’re not adding anything into the vape juice that isn’t already there in the plant.” Both factories specialize on distinct types of items.
  • Vilchis, on the other hand, claims that the Lynwood facility is primarily focused on the production of vape products and edibles.
  • Ronald Alwin captured this image.

Two Brands, One Face

Vilchis intends to bring over some of her items from the Nevada market, particularly her Queen of the Desert edible line; however, the line will be labeled under Vilchis’ California appellation, Hollyweed Queen, in order to distinguish it from its Nevada counterpart. Vilchis made the decision to employ distinct branding in each of the states in which she works in order to leverage on the momentum and media exposure she has achieved in each of the areas in which she operates. Vilchis is wagering that by concentrating on local products, she would be able to reach a greater number of consumers and patients in each location she serves.

  • Loyal customers are also more likely to be aware of the company’s other brands and will go out of their way to remain loyal even when traveling outside of the state.
  • As Vilchis puts it, “it provides them with an opportunity.” Having said that, top-selling and distinctive items will be available in both California and Nevada under a single brand name.
  • Vilchis is, in the end, the public face of her firm.
  • “It’s quite flattering,” she says.
  • As long as she delivers on her promises and follows through on all she says, she claims she has no need to be afraid.

How to Maintain a Perpetual Cannabis Harvest

There’s nothing quite like having access to your own freshly produced cannabis anytime you like. Growing a garden year-round is possible because to a technology known as continuous harvest, which allows growers to harvest their crops all year round. The concept behind it is to harvest a little amount of cannabis on a number of occasions throughout the year rather than harvesting a large quantity of cannabis once a year. You may harvest cannabis every week, every two weeks, every month, or at any other period that you choose, depending on how you build up your system.

The capacity to properly care for and regulate their plants during each phase of the growth process is enhanced.

a. Growing crops on a weekly or monthly basis allows commercial producers to better manage their labor demands and operations, as opposed to needing to bundle manpower while planting a crop and harvesting it during a seasonal grow.

What Qualifies as a Perpetual Harvest?

Continuous crop rotation across the various stages of the cultivation process is achieved by indoor perpetual harvesting, which is a horticulture design system. As a result, you’ll need distinct rooms for plants at each step of their life cycle, such as seedlings, vegetative growth, and blooming. This is because they require varying lengths of light at different stages. It all comes down to timing when it comes to maintaining a perennial crop. If you have a set of plants that are finished flowering and ready to be harvested, you will replace them with a new set of plants that are still in the vegetative stage.

And when those clones or seedlings take the place of the veg plants, you’ll take more clones or produce more seeds, and so on, creating a revolving door effect where plants cycle through the entire process as if it were a machine.

(Photo courtesy of Elysse Feigenblatt/Leafly)

Spaces Needed for a Perpetual Harvest

Separate growth areas will be required for each step of the growing cycle. In order to prevent light from one location from affecting plants in other places, make sure each space is light-tight. Additionally, ensure that plants receive the appropriate quantity of light at all times during each phase. If you are using timers, make sure to check them on a regular basis to ensure that they are still working properly. You don’t want plants in a specific phase to receive any more or less light than they require since this would interfere with their capacity to grow, which is undesirable.

Despite the fact that clones and seedlings are on the same photoperiod as plants on a vegetative light cycle, gardeners normally dedicate a separate room to them since they are more sensitive and require greater attention.

Clones/Seedlings Space—18 hours of light/6 hours of dark Photoperiod

Because of their tiny size, they thrive in warm temperatures and high humidity, and they require far less room than plants in the veg and bloom phases. Alternatively, you can just store them in your vegetative space.Clones and seedlings should have their own light that is directly above them—small T5 fluorescent lamps will suffice.Clones and seedlings should have their own light that is immediately above them. Placing heat pads below clones trays to provide additional warmth and humidity domes on top to preserve moisture in can help them last longer.

Vegetative Space—18/6 Photoperiod

Because they will not grow to be as large as blooming plants, your vegetative space might be a little less than your flower space.

T5 fluorescent lights will work OK, however high-powered lights such as LEDs or high-intensity discharge lights (HIDs) may be more beneficial for fostering rapid development. In addition to fans to circulate air throughout the area, your plants will require fans at this stage of their growth cycle.

Flowering Space—12/12 Photoperiod

Because they will not be as large as blooming plants, your vegetative area might be a little less than your floral space. It is possible to grow well using T5 fluorescent lights, however high-powered lights such as LEDs or HIDs may be more beneficial for promoting rapid development. In addition to fans to circulate air throughout the area, your plants will require fans throughout this period of their growth cycle.

The Goodthe Bad of Maintaining a Perpetual Harvest

The operation of a constant harvest throughout the year is not for everyone. In comparison to a seasonal crop, it takes more effort and preparation, and it generates ongoing work throughout the year. However, if done correctly, there are several advantages.

Pros

  • Throughout the year, you can get your hands on freshly produced cannabis. The amount and frequency of use is determined by how large or small the process is scaled. The task is distributed more equitably over a longer period of time. You won’t have to hire a slew of trimmers for the autumn harvest when everyone else is seeking for them
  • Instead, you may focus on other things. Mitigating the effects of a garden disaster is more doable. You can easily reset your garden with a minimum loss of yield if you plan ahead. Permanent harvests allow the gardener greater control over the plants at each stage of their development.

Cons

  • Permanent harvests need ongoing attention and careful management at all times of the year, regardless of the season. It might be challenging to schedule time away from the garden. The majority of strains are not ideal for continual harvesting
  • Some require more time or more physical space than others, which might cause the steady flow of plants to be disrupted during their progression through the procedure.

Tips for Perpetual Growing

A number of criteria may readily determine whether or not a permanent cannabis harvesting operation will be successful. Maintaining plants in each phase while also preparing each plant for the transition into the next step is a delicate balancing act to be achieved. Here are some considerations to make before putting one in place.

Timing

In order to avoid a flow bottleneck, it is critical that plants are prepared to transition phases at the appropriate time frame. You’ll be working with a variety of plants at various phases of development, so understanding the differences between each growth stage is essential. There are a variety of variables that influence the rate at which plants develop, including:

  • Root health, plant training, and plant genetics are all important considerations. Environmental conditions (temperature, humidity, light spectrum, airflow, CO2 exposure) are all important considerations.

Genetics Management

Every cultivar develops in a unique way. Some cultivars are tall and lanky, while others are squat and bushy in their growth. Certain strains also take longer to grow and blossom than others, depending on their genetics. Having this knowledge ahead of time can help you understand what sort of space you’ll need and how to schedule things, which is especially crucial when growing numerous strains.

Data Collection

It is necessary to maintain complete knowledge of every aspect of the whole process while staggering plants inside a perpetual system. Keep track of your progress by making notes about:

  • Temperature, humidity, and light intensity are all important environmental parameters to consider. Vegetative growth milestones, as well as training dates and protocols, are also important. Flowering times are defined as follows: Schedules for watering and fertilizing
  • Dates of transplantation
  • Troubleshooting, which may include pest management, nutritional deficits, and environmental oddities.

Patrick Bennett is an American actor and director who was born in the United Kingdom. With his wife and daughter in Denver, Patrick spends his time writing, shooting, and generating material for the cannabis community. He is a member of the Colorado Cannabis Writers Association. Take a look at Patrick Bennett’s articles. By submitting this form, you will be added to Leafly’s mailing list for news and promotional emails, and you agree to Leafly’s Terms of Service and Privacy Policy, which can be found here.

Leave a Comment

Your email address will not be published. Required fields are marked *