How to Remove Mold, Mildew and Tent Odors
When dusting off and unpacking tents that have been kept all winter, it is possible that a bad odor or mildew smell will escape from the tent. Mold and mildew develop fast on damp textiles, and it’s possible that you put the item away before it was totally dry to prevent this. Don’t give up hope. You have the ability to correct this. Our Revivex cleaners, combined with a little elbow grease, will have your dependable outdoor shelter looking fresh and clean once more. Check out the rest of this article to learn how to get rid of tent odors, including the dreaded vomit smell that may sometimes emanate from older tents.
According to how deeply the mold has been established into the nylon or canvas tent fabric, you may be able to remove the mold with merely hot, soapy water and a sponge. First and foremost, we recommend that you wash your tent with water and a specialist cleaner. This will have no effect on the performance or water repellency of your tent.
- Sponge, Bathtub / Large Container, Mild Dish Soap, Revivex Pro Cleaner
Cleaning Time: 30 minutes|Air Drying Time: 6-8 hours Estimated Time:
- Sponge and soap and water are used to clean filthy spots on the spot
- Fill the tub halfway with warm water and add 2 fl oz (59 mL) of Revivex Pro Cleaner
- Let soak for 10 minutes. Tent and outside textiles should be submerged in water and hand washed. Don’t clean the underside of the tent fly since doing so may cause it to lose its waterproof coating, which might result in damage or removal. To remove the soapy residue, rinse with water until the water runs clear. Allow for full drying by air
PRO HINT: If you have sap on your tent, use isopropyl alcohol to carefully remove it from the fabric.
Even after the tent has been thoroughly cleaned, persistent mold and mildew odors may still be present. You can deodorize your tent using a product that is gentle on the environment while yet being effective. When our Revivex deodorizing product is combined with water, the microorganisms in it become “activated,” allowing them to eat odor-causing germs in textiles.
- Bathroom / Large Container with Revivex Odor Eliminator
Time Estimation: Washing takes 30 minutes.
- Fill a tub halfway with water, just enough to immerse the tent. Every gallon of water should be treated with 1 fl oz of Revivex Odor Eliminator. Make a thorough mix. Remove all zippers and tent flaps from their positions. After that, immerse the tent in the Odor Eliminator mixture for a maximum of 5 minutes to ensure that the tent is completely saturated with bacteria. Do not wash the tent
- Instead, dry it. Allow for thorough drying by airing out and keeping it out of direct sunshine or heat.
RECOMMENDED USAGE: You may also use the combination to deodorize sleeping bags, backpacks, sandals, athletic clothing, and other goods that have a bad stench. There are a couple of more pointers worth mentioning as well:
- Make certain that you soak the tent/gear in the Revivex Odor Eliminator and water combination as soon as you get it home. As time goes on, the microorganisms devour themselves, and the solution becomes less effective as a result. Because the bacteria can only function for as long as an item is allowed to air dry, the longer the item is allowed to air dry. The Odor Eliminator microorganisms will be killed by the heat, and the germs will be washed away by the rinse. Odor Eliminator does not contain any harmful or harsh components, and the odor is decreased once the tent has been allowed to air dry entirely.
REMOVE PU ODORS FROM TENTS
Polyurethane (PU) coatings on the bottom of tentflies and the tent floor are used in tents to provide weatherproof protection against rain and snow. This coating is not intended to be permanent. After years of usage, the polyurethane covering may begin to degrade and delaminate. A tent is more prone to collapse if it has been exposed to moisture or has been submerged in water for more than five minutes. It is common for an unpleasant smell, comparable to that of vomit or urine, to be present when the PU coating is breaking down.
Visit our site to discover how to completely waterproof a tent and how to waterproof a tent from top to bottom.
- The following items are required: Seam Grip TF, Mild Dish Soap, Isopropyl Alcohol, brush, dish towel, bathtub or large container.
Time Estimated: 3 hours for treatment|24 hours for air drying
- Fill a tub or container halfway with warm water, enough to completely immerse the tent. Add five drops of liquid soap to the mixture. Submerge the tent and let it to soak for 2 to 3 hours before removing it. The tent should be removed from the bath. The failing or delaminating PU coating should be removed by gently brushing it off with a brush using a solution of isopropyl alcohol, water and two drops of soap
- Dish towels should be used to soak up any residual residue. Once the previous coating has been removed, apply a new PU coating using Seam Grip TF. Apply a thin layer to the tent floor (on the inside) or tentfly (on the bottom) and allow it to dry completely. Allow for 24 hours of air drying.
PRO TIP: After the tent has been allowed to dry fully, sprinkle the new PU coating with baby or talcum powder to help ease any early tackiness.
Now that your tent has been cleaned and disinfected, it’s critical to keep it correctly to avoid the odors from returning. Here are a few straightforward suggestions that can put an end to stinky tents once and for all.
- As soon as you get home after your trip, air dry your tent completely. Tents that are moist or wet should not be stored. Tents should be stored in a dry area.
ADVICE FROM THE PROS: To provide additional protection, sprayRevivex UV Protectanton tents and other outdoor gear to restore their color and prevent future sun damage.
How to Clean a Tent with Mold and Mildew (5 Easy Methods)
Camping may be a lot of fun, but it can also get quite dirty very quickly, so be prepared! It is important that you take good care of your tent and keep it clean and dry in order to guarantee that it continues to function well for as long as possible. The growth of mold and mildew in tents is a typical problem, especially if they are used seldom or are not properly preserved after being taken down. As you read this article, you will learn how to recognize mold and mildew problems, learn about several quick and easy ways to get rid of them, and learn about numerous ways to avoid mold and mildew problems in the future.
Identifying Mold and Mildew
First and foremost, it is advised that you examine your tent after each usage to discover any mold or mildew that may need to be addressed, especially if you are a frequent camper or hiker. On your next camping vacation, you don’t want to be breathing in mold particles without realizing it! In the same way that you wash your sleeping bag, you will want to make sure that your tent is clean and sanitary before sleeping in it for the first time. If you find any odd areas, check to be sure they are not merely dirt or dust by wiping them off with a moist towel for a few seconds.
In most cases, it appears as little black, blue, or green flecks on the surface of the tent’s canvas fabric.
Mildew looks similar to mold and is often white, gray, or yellow in color.
5 ways of Cleaning Mold and Mildew from a Tent
In the event that you discover mold or mildew in your tent, it is imperative that you clean immediately. Here are a few alternatives you should consider. It is more than probable that the first two alternatives will be sufficient if you have a little or very mild mold problem. That being said, if you are planning to use your tent after a few months and see severe mold, I would recommend pursuing all of the alternatives available to you to ensure you have a clean and safe tent for your camping vacations.
Soap and Water Method
In order to ensure that your tent will not be stained or damaged by any of these procedures, you should do a spot test on a small section of your tent before proceeding. Because it will be much easier to clean after your tent is set up, the first step is to pitch your tent as soon as possible. Next, use a soft-bristled brush or a cloth to remove any mold that you can find (you’ll want to do this outside to avoid bringing mold spores into your house). For canvas tents, use a stiff-bristled brush, but scrub gently to avoid damaging the fabric.
Cleanse well with clean water and leave to dry in a shaded location. Nikwax Tent and Gear Cleaning, Waterproofing, and UV Protection is a trademark of Nikwax Corporation.
- It is ideal for use on a variety of items including tents, flys, backpacks, and awnings as well as boat coverings, umbrellas, patio furniture, and panniers Water-based, biodegradable, and free of PFCs, volatile organic compounds (VOCs), optical brighteners, and added smell
- UV protection helps prevent sun damage and extend the life of outdoor gear
- Greatest results are obtained after using the Nikwax TentGear SolarWash. Application by spraying on
NIKWAVEN TentGear SolarProof (Spray-On) 500 mL
- Weather-resistant textiles are revitalized and given a water-repellent coating. Increases UV protection to help prevent sun damage and extend the life of outdoor gear. It works well when used in conjunction with Nikwax TentGear SolarWash. Application by spraying on
- It is ideal for use on a variety of items including tents, flys, backpacks, and awnings as well as boat coverings, umbrellas, patio furniture, and panniers Water-based, biodegradable, and free of PFCs, volatile organic compounds (VOCs), optical brighteners, and added smell
Weather-resistant textiles are revitalized and given a water-repellency boost. This product provides additional UV protection to help preserve clothing from sun damage and to help it last longer; After using Nikwax TentGear SolarWash, this product performs best. Application via spraying on the substance Excellent for use on tents, flys, backpacks, awnings, boat coverings, umbrellas, patio furniture, and panniers; also good for use on bicycles. Designed to be water-based and biodegradable, with no PFCs, volatile organic compounds, optical brighteners, or added smell;
Vinegar and Lemon Methods
Your next step will be to experiment with vinegar. Using a spray bottle, combine a cup of warm water and a quarter cup of vinegar. Spray the affected area liberally. Allow the solution to settle for a few minutes before beginning to gently clean the tent. Finally, allow the tent to dry completely. You may also use the approach described above, but instead of vinegar, use lemon and salt instead. The ingredients for this recipe are one gallon of boiling water, one cup of freshly squeezed lemon juice, and one cup of salt.
It is possible to go on to more severe cleaning products if you are unsuccessful with these treatments.
Spray-On Treatment Method
For example, Concrobium mold removal solution, especially Mold Armor mould killer, makes it simple to spot treat mold in a variety of locations. You should spray the product on the moldy area and allow it to dry, according to the manufacturer’s directions on their website. Once the substance has been soaked in with a brush or a cloth, gently scrape at the mold or mildew with the tool. There is also a Concrobium Mold Stain Eraser available, which may be used to remove very tenacious spots. Finally, reapply the cream and let it to dry completely, creating a protective covering that will prevent future issues.
contains mold and mildew killer, quick stain remover, and trigger spray bottle.
- ARMOR MADE OF MOLD Using Mold and Mildew Killer Quick Stain Remover, you can eliminate mold and mildew, as well as germs and viruses in a matter of minutes. A germ, bacterium, virus, and fungus killer with a broad range of activity that removes mold, mildew, algae, filth, and grime stains
- It should be used on hard, non-porous surfaces such as bathtubs and shower doors as well as toilet seats and worktops as well as cemented grout. Effortlessly cleans and disinfects in a single application with a bleach-based product that requires no scrubbing. To sterilize a nonporous surface, thoroughly clean it before spraying it. Remove any traces of dirt and grime
- A mold spray that is effective on a wide range of hard, non-porous surfaces, including concrete. In 30 seconds, it kills 99.9 percent of household bacteria, viruses, fungus, and germs
- It is environmentally friendly.
Another product that you may use as a spray-on is Iosso’s Mold & Mildew Cleaner. This product comes in the form of a concentrated powder that must be diluted with water and placed into a spray bottle before using. Because it does not include bleach, it will not discolor or harm the colors or fabric of your camping tent. It may also be used for different types of materials like as tarps, boat coverings, and awnings, amongst other applications. These alternatives are excellent if you have stubborn mold that milder methods are unable to eliminate, but you do not have big regions of mold or mildew to remove at the same time.
Deep Cleaning Method
If none of the solutions listed above are successful, it is necessary to take more drastic measures to restore your tent to its former camping state. This procedure should be effective in eliminating any mold and mildew concerns. Your first step should be to spot clean any problem areas as thoroughly as possible using the methods listed above. After that, fill your bathtub halfway with lukewarm water and add an enzyme cleaning solution, being sure to read the label to determine how much cleaner to use.
The tent should be turned inside out before being submerged in the tub, therefore any screens or flaps should be unzipped first.
After that, rinse the tent well with fresh water.
After soaking your tent, spot wipe it using a towel or a brush to remove any remaining stains.
You should always check the waterproofing of your tent after using any of these techniques since certain materials might cause harm to the coating, especially if they are left on the tent for a longer period of time than is suggested.
Removing the Smell
A musty smell may persist in your tent after cleaning if you have a major mold or mildew problem in your tent. If this occurs, several items can assist in removing the stink from the air. An other product that requires diluting is Revivex Odor Eliminatoris. Using the cap, fill a big tote halfway with cold water and then measure out half an ounce of the formulation. Before you set up your tent or hang it to dry, make sure it is completely saturated. Additionally, the solution will aid in the prevention of future smells and may be used on other outdoor clothing.
2-ounce bottle of GEAR AID Revivex Odor Eliminator, an all-natural formula that may be used on tents, footwear, and sports equipment
- Remove harsh and unpleasant odors from clothing with this powerful mixture that is efficient, all-natural, and non-toxic
- Make use of this mild wash to treat numerous clothing at the same time, using only half an ounce of detergent in 20 gallons of water. In addition to outerwear and tents, athletic clothing and shoes, and pet gear may all be treated with this multifunctional solution
- It is also effective on materials such as neoprene, nylon, polyester, and GORE-TEX. Spray or soak for difficult-to-clean gear
- Offered in two sizes: 2 ounces and 10ounces, all of which are suitable with washing machines
- It is possible that the packaging will differ.
How to Prevent Mold and Mildew
Most importantly, when camping and storing your tent, you should try to keep it as dry as possible to prevent mold and mildew from developing. Check the waterproofing of your tent on a regular basis to ensure that it is still working, and reapply as necessary. When not in use, you should store your tent in a big, ventilated bag to keep the bugs out. A mesh bag or pillowcase works great, however the bag from which the tent was originally packaged is not always the ideal option. Never store it while it is still wet; instead, allow it to dry completely beforehand, if at all feasible, or, if this is not possible, dry it as soon as possible thereafter.
- Cleaning the tent floor on a regular basis, just like you would with any other type of floor, is also recommended.
- In addition, if you plan on camping for an extended period of time, it’s a good idea to remove away any vegetation from the area where your tent will be placed and to frequently brush away any debris that may fall on it.
- Following extended camping vacations during which the tent gets obviously dusty, a thorough cleaning should be performed.
- However, the contrary is true: while the sun will keep the tent drier than the shade will, it can also cause UV damage to the materials.
There are a variety of methods for removing mold and mildew from your tent, and you can choose which approach to use dependent on the degree of the problem at hand. Small mold problems are likely to be treated with soap and water on a spot basis, which is likely to be the only strategy you need to attempt. If you have a tent that has been stored in a wet environment for a lengthy period of time and has developed a substantial quantity of mold and mildew, it may be preferable to immediately do a comprehensive cleaning.
Keeping all of these tips in mind will help to ensure that your tent looks and performs at its best!
The Best Way Remove Mold and Mildew From Your Camping Gear
Camping equipment is susceptible to becoming a victim of mold and mildew. Mold and mildew can grow in your tent if it is not properly cleaned, dried, and kept while it is not in use or when it is not being used. Consider the possibility of going on a fantastic camping vacation to the beach. A cliff overlooking the seaside has been designated as your campsite. Taking pleasure in the sea air, beach bonfires, and camping cookouts is what you’re doing right now. The sun is shining, and you’re enjoying time with your family and friends.
- When the dreaded moment arrives, it’s time to pack up, dismantle camp, and return home.
- When you go home, you put that camping sack in the attic of your garage and get back to your normal routine of living life.
- When the time comes to go camping again a few months later, you load up the car and drive off.
- You set up your camp after unpacking your belongings.
- No, there isn’t any mildew on your tent!
- Mold and mildew can form on your camping tent if it is kept in a moist, humid environment in a tightly packed space with warm circumstances.
- Mold residue may create a black stain on your camping tent that is difficult to remove, but don’t worry, your tent can be preserved if you follow these steps.
- Here’s how to do it.
How to Clean Your Gear
- When it comes to camping equipment, mold and mildew are a common affliction. Mold and mildew can become an issue if yourtent is not properly cleaned, dried, and kept when it is not in use. Consider going on a camping vacation to the beach with your friends. A cliff overlooking the ocean has been designated as the location for your tent. Taking pleasure in the sea breeze, beach bonfires, and camping cookouts is what you’re doing right now. Spending quality time with family and friends, while Fido is having the time of his life rolling about and playing in the sand. After a long and arduous journey, it is finally time to pack up and return home. It’s imperative that you quickly shake the sand out of your tent, clean it down, dismantle the poles, and place it in the trunk of your car. When you arrive home, you put that camping sack in the attic of your garage and return to your normal routine. Even though the camping trip was filmed on Instagram and discussed at work luncheons, it seems like it was a long time ago. After a few months, you decide it’s time to go camping again, so you load up the vehicle and drive away. This trip to the mountains and camping beside a lakeshore has you giddy with excitement. Then you set up your camp after unpacking your belongings. But, hold on a sec, please. Not mildew on your tent, please! When you crammed the tent in the garage throughout the summer, the damp ocean air didn’t have a chance to dry off, and it became infected. Mold and mildew can form on your camping tent if it is kept in a moist, humid environment in a tightly confined space with warm circumstances. When you go camping, one of the things you don’t expect is mildew. Mold residue may create a black stain on your camping tent that is difficult to remove, but don’t worry, your tent can be preserved if you follow these instructions. Keep your tent clean and dry while not in use, but if mold and mildew have infiltrated your tent, canvas, or awning, you can simply remove them with little elbow grease. To do so, follow these steps:
- In order to prevent mold spores from entering the house, brush the items outside. Before putting your camping gear away, check to see that it is completely dry. Store your camping equipment in a dry, well-ventilated location.
Monica Prelle is in charge of updating and editing this document. Thank you for informing us about this!
How To Clean A Tent With Mold (Step-By-Step)
Tents spend a significant portion of their life being packed away after just brief periods of use outside. It’s also conceivable that, even if you took every precaution to keep your tent clean while camping, it will nonetheless become moldy while in storage. Mold development in your tent is indicated by the presence of musty, stale odors. As a result, you must act quickly in order to prevent it from spreading.
Essential Tips When Cleaning A Tent
First and foremost, before we begin cleaning the mold off of our tent, here are a few crucial points to remember while you are cleaning a tent (mold or not).
- When cleaning your tent, avoid using a cleaner that is extremely abrasive because it might damage the fabric and limit the life of the tent
- Never wash your tent in a washing machine since it will ruin it. It has the potential to demolish tent materials, seam tape, special coatings, and any waterproofing that may be present. Only the outside material should be hand washed. It is possible to harm or remove the polyurethane waterproofing coating that is put inside most tent fly by scrubbing the underside of the tent.
More vital basic cleaning tips may be found in our step-by-step guide on how to clean a tent.
How To Clean A Tent With Mold While Camping
Mold often forms on your tent while it is being kept, and unless you inspect your tent before departing for your vacation, you may not be aware that you have a mold problem until you get at your campground.
Don’t be concerned; this is a frequent problem that may be resolved in a short period of time by following the procedures below.
What you’ll need
Before you begin cleaning your tent, make sure it is entirely set up and that the rain flap has been removed.
Step 2: Prepare some warm soapy water
Set up your tent thoroughly and take off the rain fly before you begin cleaning it.
Step 3: Scrub using a rag or a sponge
Mold growth should be removed from any areas of the tent that have been scrubbing.
Step 4: Rinse thoroughly
Once the area has been cleansed, carefully rinse it to eliminate any remaining soap.
Step 5: Leave it to dry completely
Most of the time, after washing your tent, you should leave it to dry in the shade. For those who have just cleansed mold from their tents, the sun will work as a natural bleaching agent, assisting in the killing of any germs that may have remained after the mold has been removed. Simply simply, do not place a tent in a dryer since this might cause further complications.
DIY Remedies For Removing Mold On A Tent
If you notice mold or mildew on your tent before you leave for your camping vacation, you have a number of choices for cleaning it with ordinary home items that you may use. Although the DIY methods shown below are successful at cleaning and killing mold in your tent, they may have a negative impact on the overall longevity of your tent. Despite the fact that they both involve cleaning with natural ingredients, you should exercise caution when using them.
Method 1: Lemon juice and salt
You will require the following materials:
- Ingredients: 1 gallon water, 1 cup lemon juice, 1 cup sea salt, a sponge or a bristle brush
1 cup lemon juice, 1 cup salt, and 1 gallon of hot water are combined to make a delicious drink. Apply this solution to the mold spots on your nylon/polyester tent and scrub them with a towel or a bristle brush until they are completely gone. Using a sponge, clean the inside of your tent. Always utilize the side of the sponge that is not abrasive. If you are cleaning a canvas tent, a bristle brush should be used instead of a sponge. Scrub the moldy sections of your tent canvas with a stiff brush to get rid of it as much as you can.
Method 2: White vinegar diluted with water
There’s a good reason why vinegar is known to be a cleaning powerhouse: it works. You will need the following items to complete this method: 1 cup white vinegar and 1 gallon of water should be combined. Fill a spray bottle with the mixture and saturate the problematic portions of your tent with the solution. As previously indicated, scrub the moldy area using a bristle brush or sponge, depending on the material of the tent you’re using. Do not rinse the tent after allowing the vinegar to work its magic.
How To Remove MoldOdors From Tents Using Revivex
It is possible that even after cleaning your tent with soap and water or one of the DIY mold elimination methods listed above, you may still detect a terrible, moldy stench emanating from your tent. Using water-activated enzymes that permeate the pores of your tent fabric, Revivexeliminates odor-causing microorganisms such as mold, mildew, and other odor-causing organisms. Following a thorough cleaning of your tent, follow these instructions for using Revivex to further eradicate mold and smells.
- Fill a big washbasin halfway with water (about 20 liters)
- Add in 0.5 ounces of Revivex and stir well. Open the tent flaps and unzip the zippers if necessary. For a maximum of 5 minutes, soak the tent in the solution. Your aim is to saturate the tent with as many microorganisms as possible, allowing them to eat the odor-causing mildew that has accumulated inside. Please do not rinse the tent. Bacteria will be washed away as a result of this. Additionally, avoid using any heat because it might destroy the microorganisms. The tent should be removed and allowed to dry naturally after being submerged for 5 minutes. Eventually, the stink will dissipate as the tent dries.
Revivex is most effective immediately following the mixing of the solution with water, while the majority of the bacteria are still alive and active. As time progresses, these microorganisms eat themselves, rendering the remedy less effective overall. As a result, be careful to soak your tent as soon as possible after mixing Revivex and water. The longer you leave your tent out to dry naturally, the greater the chance that bacteria will be able to perform their job. Make every effort to allow the tent to air dry in a cool, shaded area away from direct sunshine.
It is recommended that you should not wet your tent for longer than 5 minutes in order to avoid this from happening.
After all of that, if your tent continues to smell, it is most likely the result of another problem. Check read our tutorial on how to clean a stinky tent to quickly detect the problem and restore the tent’s fresh scent.
How To Prevent Mold On Your Tent
It’s often said that an ounce of prevention is worth a pound of cure when it comes to mold removal. After a camping trip, cleaning and drying your tent is a time-consuming task, but the effort is well worth it if you want to avoid mold and mildew growing on your tent.There are several ways to prevent mold from growing on your tent, and the method that works best for you will depend on your camping style.For weekend or casual campers, making sure your tent is clean and dry before packing is a great way to prevent mold.
When you return home, take care of the following:
- Remove as much dirt and debris from your tent as you possibly can by shaking or sweeping it. If the tent is damp, allow it to air dry outside, away from direct sunlight, until it is totally dry before storing it
- If the tent is dry, store it in its original packaging. Always keep your tent in a cool, dry location that is out of direct sunlight. Also, be sure to store it in a big, ventilated bag to prevent mold growth.
If you want to live in your tent for an extended period of time, such as several months, there are a few things you can do to keep mold from growing in your tent.
- Check your tent for signs of mold development on a regular basis. Remove any dead bugs or bird feces from the area
- Take care to trim any grass or trees that are growing too near to your tent. Maintain good ventilation in your tent. While camping in the rainy season, spray the tent with a water-resistant spray.
Is Mold In A Tent Dangerous?
Despite the fact that the mold in your tent is not directly dangerous, you should avoid inhaling the free-floating spores that it creates while camping. Mold exposure can cause allergies to flare up and exacerbate existing illnesses such as asthma. To avoid these responses, thoroughly clean your tent if you find any mold development and take steps to prevent more mold growth in the future. Tent Hacker is made possible by donations from readers. It is possible that purchasing through links on our site will result in us receiving an affiliate commission.
How to Clean Mold From Canvas Tents
That final slice of bread has it on it, and it’s creeping up your bathroom wall, or it’s dusting the exterior of a beautifully dry-cured sausage paired with an excellent French cheese. Mold, whether for good or ill, is a tenacious feature of the environment in which we live. It can also cause damage to your possessions. First and foremost, it is important to note that Canvas tents have been used all over the world in a variety of situations for more than 100 years, and they continue to be the unchallenged champion in the tentage material market because they are made to withstand the elements.
Preventative maintenance is necessary for this item, just as it is for other excellent items of equipment, tools, and apparel.
Understanding Mold on Tents
Mold is a kind of fungus. Mold, as opposed to plants, does not require sunlight to develop and instead obtains its energy from decomposing organic materials. Without getting too scientific for a blog about tents, mold excretes enzymes that cause organic things to breakdown (also known as “rot”), which it eats in order to generate energy for reproduction and waste, and so the circle of life pulls us all in one direction or another.
Mold is nature’s recycling center, a fascinating and vital component of the natural world that helps to keep our planet livable. Mold is also a fascinating and essential component of our planet’s biotic community.
Where does Mold come from?
Mold may be found almost everywhere in nature. Mold adheres to everything: clothing, skin, hair, leaves, bugs, you name it, it’s most likely covered with mold. Mold may grow almost everywhere that has a temperature above freezing. Mold may thrive in a variety of conditions, but it is more aggressive in damp, dark areas where there is a lot of organic material for it to feed on. Consider the rainforest. Consider the upcountry areas of Hawaii. It is mold’s method of spreading and reproducing that it releases vast quantities of spores that may readily move via the air or water and colonize new areas.
Is Mold Dangerous?
Even though we at CanvasCamp are not medical specialists, we have concluded, following significant study, first-hand experience, and extensive experimentation, that unmanaged mold may completely ruin a tent’s fabric and structure. Mold is unpleasant in moderate situations, and once mold has penetrated the fibers of the canvas, it is extremely hard to entirely remove it, though it is quite feasible to keep it from spreading. In severe cases, mold can be fatal. Mold may create rot, holes, and rips in a tent, and in severe circumstances, it can cause the tent to be completely destroyed.
Mold, in general, is not harmful to people, and a healthy individual who does not have a specific mold allergy or previous ailment will be mostly unaffected by mold exposure.
Is my tent mold resistant?
CanvasCamp tents are constructed entirely of 100 percent cotton canvas that has been treated with a light treatment to boost water resistance while also providing UV and mold protection. All CanvasCamp tents are handcrafted in the USA. When selecting a therapy, we strive to achieve the optimal mix of comfort and long-term effectiveness. The permeability of the canvas has a significant impact on the comfort factor: the heavier the treatment, the less the canvas breathes, resulting in an increase in internal humidity.
A light, ecologically friendly treatment serves the great majority of the market in a variety of contexts, as we discovered when establishing that balance.
The tent should be treated after 20 weeks of continuous usage, according to industry standards.
The tent may require treatment after 10 weeks, if it has been set constantly in a region with high humidity, dense vegetation, or heavy rainfall. About ourFAQpage, you’ll find more information on cleaning and retreatment procedures.
How do I prevent mold?
When it comes to the casual camper or glamper, routine cleaning and treatment, as well as making certain that you never pack your tent while it is moist or soiled, can suffice to keep mold at bay. After allowing the tent to dry entirely in the sun, check that the floor, guylines, poles, stakes, and bags are all absolutely dry before rolling it up and storing it. If you are pitching your tent for an extended amount of time or living out of your tent, you are AMAZING! As a seasoned naturist, you understand the need of keeping a clean camp and using high-quality equipment.
- Purchase the Pro or ProTech bell tents, which are particularly intended for long-term usage or exposure to harsh conditions
- Or Check the tent for mold development on a regular basis (a good time to do this is when you retension the guylines). Mold should be killed quickly with vinegar and the area should be retreated as soon as possible with bleach. DryGuy Canvas Waterproofing
- DryGuy Canvas Waterproofing Remove any dead leaves, bugs, bird feces, or other debris that has fallen on the tent
- Reduce the amount of vegetation in the surrounding area so that tall grass and weeds are at least several feet away from the painting canvas. Continue to do so when new growth appears. (Doing so also helps to keep the windows clear and makes you feel more comfortable.) Maintain adequate ventilation in your tent. The ProTech bell tents include mesh-covered vents, windows, doors, and even walls, which make it easy to remain cool and comfortable. If you see that the atmosphere is having an adverse effect on your tent, clean and retract the canvas as necessary.
Please keep in mind that taking your tent down from time to time will be necessary for cleaning and retreating. On a sunny day, a normal cleaning and retreatment project may be completed in a few hours. If you are planning on living in your tent, be prepared to bring your belongings out for a thorough cleaning at least once a year.
Won’t the sun prevent mold?
Having plenty of moisture and sunshine creates a great environment for plants to thrive, whereas dead plants and moisture provide an ideal habitat for mold to flourish. Over millions of years, several different forms of mold have developed defenses against the harmful effects of ultraviolet radiation. Additionally, UV radiation destroys the treatment applied to the tents, exposing the canvas to the outdoors and increasing the likelihood of mold penetration into the structure. Don’t rely on the sun to keep you warm.
Should I just go with a plastic tent?
Plastic tents are wholly different beasts than CanvasCamp tents, and there are advantages and disadvantages to using each type of shelter. Canvas tents demand more upkeep and care than plastic tents, but they are significantly more comfortable, environmentally friendly, and long-lasting. When it comes to moldability, plastic is less delectable than cotton since it is non-organic and petroleum-based. This is why plastic does not biodegrade efficiently, and it is also why our seas and landfills are overflowing with plastic waste.
Plastic does not breathe as well as canvas, which is necessary in a humid atmosphere in order to maintain a suitable level of interior humidity.
Mildew continues to affect plastic tents, resulting in a stench that really smells.
How to Clean Mold From A Tent
Mold is difficult to avoid, but it may be found almost anywhere and affect everyone. The mold can come in different shapes and colors, but on canvas it usually appears as little black, blue, or green spots scattered across the canvas. To kill it, spray it with distilled white vinegar. Allow it to dry before cleaning it with a soft brush and a combination of salt, lemon juice, and hot water.
Let it dry before cleaning it. Avoid using detergent soaps or bleach on canvas since they are harsh on the fabric and difficult to remove. Allow it dry.Retreat it: Using a canvas treatment, saturate the clean, dry canvas (we likeDry Guy).
Deep Cleaning a Very Dirty Tent
The most effective approach of preserving a tent is always to avoid mold and mildew growth; yet, mold stains sometimes develop, particularly in warm, flora and fauna-rich regions. If nature has raced your tent cleaning regimen and you’ve ended up with a filthy tent on your hands, there is still hope for your situation! First and foremost, keep the following points in mind before getting started:
- Prepare yourself for a realistic expectation: mold stains are incredibly difficult to completely remove. Although the tent will never appear brand new again, with a little effort and patience, a thorough cleaning may significantly extend the life of your tent
- Deep cleaning is time-consuming and will take a significant period of time. According on how dirty the tent is or how much soap you have to rinse out, you may need to repeat a couple of these procedures. Enlist the assistance of others! Tents are heavy, especially wet tents, which are quite heavy. In the event that you master this method and decide to establish a bell tent cleaning service in your region, please let us know! There is a demand for it.
Materials Needed to Deep Clean a Moldy Tent
- In powder form, a bucket of Oxyclean
- Oxyclean is sodium percarbonate
- It’s possible to manufacture your own, but it’s preferable to buy the brand name, which is typically extremely inexpensive
- A huge container that can accommodate the tent canopy and water while yet providing enough space to stir and manage the water. A 55-gallon drum, garbage can, huge storage container, and other similar items are recommended. Strong stir sticks made of boom handles, canoe paddles or debarked wood branches with smooth ends are recommended. a soft brush or broom for sweeping
- A plentiful water supply (hose)
- Two physically fit employees
- And To finish all the labor and enable the tent to dry completely at least twice, you’ll need 24-48 hours of good weather. Items for cleaning your kitchen floor include a mop and some mild soap, or whatever you normally use to clean your kitchen floor. Waterproofing solution for DryGuy Canvas to withdraw the tent so that you won’t have to do this again for a while
Deep Cleaning Process:
- To begin, use a soft brush or broom to remove any loose dirt or debris. Disconnect the canvas tent canopy from the tent’s floor with a rope. You will clean the floor on a separate occasion. You can leave the guy-lines in place if they are unclean, but keep in mind that they will need to be retracted at the conclusion of the project to prevent UV damage. Fill a very big container halfway with warm water, about 1 foot (30cm) deep. Using your best judgment, determine how much Oxiclean to use according on the condition of the tent, and refer to the manufacturer’s guidelines. Continue to stir vigorously until the fluid is entirely dissolved. Warm water is more effective in dissolving the solution than cold water. In the container, place the tent canvas (not the floor) and close the lid. Fill the tent with water until it is completely saturated
- Stir and stir vigorously to ensure that the solution is properly combined and that the canvas is soaked evenly. Allow the tent to soak for 4-10 hours, stirring it regularly, before removing it from the water. In the event that you must, it is OK to keep it soaking overnight. You will need a clean area to set the tent on while it is drying, so prepare your clean floor in advance of this. You may clean the tent floor in the same way that you would clean a kitchen floor. Remove the tent from the ground, clean it, and rinse it
- When you’re through soaking, drain the filthy water and leave the tent inside. It is unlikely that Oxiclean would harm grass, but if you are concerned, simply water off your lawn afterwards
- The cure to pollution is dilution. Pre-rise rinse and turn the container on its side to get rid of any dirty residue, then check the tent’s appearance once it has been set up. If you believe it need another round of soaking, fill the container halfway with extra oxiclean. If the canvas appears to be pretty clean, add extra water and agitate and mix the canvas with your stick before dumping it. Repeat as necessary until the majority of the soap has been removed from the canvas
- Pitch your tent by laying the fabric on top of your freshly cleaned tent floor. Another option is to place the floor of a car on top of the canvas, which will aid with runoff and drainage. It is not recommended to place the canvas directly on your vehicle since Oxiclean might peel the clearcoat. Using the hose, hose down the tent one again, being careful to remove any residual soap. Allow for thorough drying of the tent. Remove the tent from the ground and spray it with a canvas-specific waterproofing solution of your choosing. DryGuy is a favorite of ours since it is effective and non-toxic
How To Clean A Tent With Mold? — Outdoor Gist
Using a soft brush or broom, sweep up all loose dirt and debris; The canvas tent canopy should be separated from the tent’s floor. It is your responsibility to clean the floor on your own! Leaving the guy-lines on will not cause any damage, but remember that they must be treated at the end of the project to prevent UV damage. Water should be roughly one foot (30 cm) deep in a very large container. Use your best judgment to determine how much Oxiclean to use based on the state of the tent’s cleanliness and refer to the instructions on the package for guidance.
- Compared to cold water, warm water dissolves the solution better.
- Fill the tent with enough water to completely submerge it.
- Allow the tent to soak for 4-10 hours, stirring it regularly, until it is completely saturated.
- You will need a clean area to set the tent on while it is drying, so prepare your clean floor in advance of the drying process.
- Make a thorough cleaning of the area; once you’re through, drain the unclean water and leave the tent intact.
- Do a brief pre-rise rinse and roll to clean the filthy residue off the container while it is on its side to check how the tent appears.
- Pour in additional water and agitate and swirl the canvas with your stick until it seems relatively clean.
- Prepare to pitch your tent by laying the fabric over the clean tent floor.
- It is not recommended to place the canvas directly on your automobile since Oxiclean might peel the clearcoat.
- Allow for full drying of the tent; Using a canvas-specific waterproofing solution of your choosing, retreat the tent.
Can You Clean A Moldy Tent? How?
If you have a mold problem, you need to act quickly before the mold destroys your tent and renders it worthless. Mold, as we all know, has the capacity to spread swiftly, especially in a setting that is conducive to it. In the event that you see mold growths on your tent, what is the first thing that springs to mind? Can I just spray bleach on the afflicted region to get rid of the infection? Isn’t it true that nothing destroys mold quicker than bleach? That is correct, but never make the mistake of using bleach to remove mildew off of a tent.
Before attempting any solution, examine a tiny portion of the tent, ideally in a less visible location, to ensure that it is safe for your tent before proceeding.
When working with canvas tents, you need use extreme caution. Also, never machine wash or dry your tent in a dryer unless absolutely necessary. Here’s how to safely and properly clean a tent that has mildew on it.
Solution1: The Basic Warm Soapy Water
You should start with the most fundamental of cleaning supplies: warm water and non-detergent soap. In some cases, it may be sufficient to completely eradicate mold and mildew from a tent’s inside.
- Set up a tent if necessary. When a tent is pitched, it is much easier to clean it
- Remove any loose debris or dust from the region around the afflicted area with a soft cloth, soft bristle brush, or soft sponge to prevent further damage. If you’re working with canvas tents, a hard bristles brush is best. Wash the nylon/polyester tent with a sponge and warm soapy water once it has been set up. Always utilize the side of the sponge that is not abrasive. Use the stiff bristle brush instead of the soft bristle brush if you’re working with a canvas tent. However, carefully clean the affected areas. Remove the tent from the ground and rinse it well with clean water. Allow the tent to dry completely before using it.
After trying this solution and failing miserably, it’s time to take things to the next level with some DIY cleaning remedies.
Solution2: The Magical Vinegar
A very excellent reason why vinegar is regarded to as a cleaning powerhouse is because it is quite effective. In a spray bottle or a dish, combine 14 cup white vinegar and 1 cup warm water until well combined.
- Follow the two (2) procedures outlined above for setting up the tent and cleaning off the dirt. Using a spray bottle, apply the liquid to the mold-affected areas. Allow it to sit for a minute before cleaning it with a sponge, towel, or brush (depending on the material of the tent, as previously described) to remove the stains. After mixing the solution in a bowl, apply the solution to the afflicted region with a sponge, cloth, or brush
- If you used a brush, apply the solution with a sponge or cloth instead of a brush. There is no need to rinse. Allow the solution to work its wonders
- If at all possible, allow the tent to dry completely while it is fully pitched.
If you have a mold or mildew problem that is difficult to resolve, repeat the approach.
Solution3: The All-Natural Lemon
Another successful technique for removing mold from your tent is a combination of lemon juice, salt, and water. 1 gallon of boiling water should be mixed with 1 cup of salt and 1 cup of lemon juice. Step through the process in the same manner as outlined in solution2 above. If necessary, repeat the process. I’ve read about the use of the aforesaid mixture, as well as Lysol multi-purpose cleaner combined with warmish-hot water, in several publications. The lemon juice combination is used to remove the Lysol solution from the surface of the skin.
The only thing that makes me uncomfortable is the smell of Lysol.
Some Lysol cleansers also include bleach, which is a potential health risk.
Solution4: The Antibacterial Tea Tree Oil
Tea tree oil is another another powerful weapon in the struggle against mold and mildew. This essential oil, commonly known as melaleuca oil, has anti-fungal and anti-bacterial properties that are naturally occurring. As a result, it has a very excellent probability of prevailing in this battle. Although it has a powerful aroma, this might be a turn-off for those who are not huge fans of perfumes or other scented products. It may take many days for the odor to disappear, drawing insects to your tent.
It’s important to remember that not all tea tree oils are made equal.
They are frequently packed in dark glass bottles in order to minimize quality degradation when exposed to light.
Ensure that the solution is fully combined by giving it a brisk shake.
- You should be familiar with the procedure by now (wiping dirt off)
- Mold and mildew can be removed by spraying or applying the solution directly to the affected area. There is no need to rinse. Allow it to dry naturally
The technique should be repeated if the mold or mildew is still visible after adding white vinegar to the mix. That is, in essence, how to clean a tent that has mildew on it!
There is a potential that you will have destroyed the waterproof coating as a result of applying these techniques. You may either test the tent to determine if the waterproofing has been affected or simply reproof the tent when it has dried to ensure that it is completely watertight.
Before you begin reproofing the tent, be certain that it is absolutely dry. There are many different types of waterproofing products available; make sure you choose the one that is appropriate for your tent. Also, before doing anything, make sure you thoroughly read the manufacturer’s instructions.
What About the Mildew Smell?
Everyone is familiar with how awful and aggravating the smell of mildew can be. And the worst part is that it’s all free. The musty odor that lingers around the tent even after all of the washing and drying has been completed. Fortunately, getting rid of mildew smell is a rather simple process. Consider purchasing the all-naturalMiraZyme. It’s one of, if not the greatest mildew odor remover available on the market.
How to Prevent Mold and Mildew from Invading your Tent?
- Before you pack your tent, shake/sweep the tent to remove as much garbage and dirt as possible. Never pack a tent that has become damp. If the weather is suitable, you should hang it to dry in the shade, away from direct sunshine. However, if you have to carry it damp for any reason, be sure to dry it as soon as you can thereafter. Mold and mildew grow in moist environments
- Always keep your tent in a cool, dry location that is out of direct sunlight. A big ventilated bag is also recommended for storage purposes.
Preventing mold and mildew from growing is the most effective way to deal with the problem altogether. However, if it does occur, deal with it as quickly as possible to avoid further development and to restore comfort to your tent.
How to Remove Mold on Tents & Camping Equipment
Camping equipment is subjected to wet weather on a consistent basis, accumulating moisture and creating an ideal environment for mold growth. There is a good chance that if your camping equipment smells musty or old and stale, it is because mold has developed on moist materials like tent canvases. Concrobium Mold Control makes it simple to get rid of unwanted odors.
- Concrobium Mold Control should be sprayed into the infected area and allowed to dry completely. As it dries, Concrobium will crush the mold spores at their source, eliminating any mold that may have previously existed. Remove any leftover mold residue from the surface by scrubbing it with a cloth or brush wet with Concrobium. Concrobium Mold Stain Eraser can be used to remove deep and ingrained mold staining, which can be difficult to remove without the use of a special tool. Ensure that a coating of Concrobium remains on the surface to prevent future mold development by reapplying Concrobium as needed.
- Fogging may be used to get rid of moldy, musty odors in your tent’s inside. You can use Concrobium in conjunction with a fogger to gently mist the product, which will successfully eliminate mold and musty aromas
- However, an enclosed tent is not recommended. Tip During a nice, dry day, open all of your tent’s doors and window flaps and hang it out to dry completely. Any leftover moisture will be dried up, and mold and mildew will be prevented from growing with the assistance of fresh air.
How to Clean a Tent With Mold (Safely and Leave it Sparkling)
It should be noted that this content may contain affiliate links. As an Amazon Associate, we receive a commission on qualifying purchases made via our links. Mold on a tent may be unattractive and must be removed. Some health risks may also be associated with it, particularly if the user is sensitive to fungus. Because of the dangers involved, sleeping in a moldy tent is not recommended in most cases. As a result, cleaning a moldy tent is essential, as it guarantees that the textiles survive for a longer period of time.
This fungus thrives in the presence of even the smallest amount of moisture as well as other ideal circumstances such as dim light.
When wet weather hits, it is possible to be compelled to rapidly pack up when it is time to return home without having time to dry the tent.
Due to the tight and gloomy cover of hard shell roof top tents, we discovered that they tended to grow mildew more quickly than soft shell roof top tents.
How to Clean a Tent with Mold
After their camping excursion, campers should properly clean their tents. Whatever the case, don’t be concerned; washing a camping tent is a simple and quick operation. Despite the fact that mold removal appears to be a difficult task, it may be accomplished by following a few simple procedures.
Requirements for Cleaning a Moldy Tent
- Warm water, a soft brush, white distilled vinegar, and nonporous gloves are all you need.
Steps to Getting Mould Off a Tent
This is the initial phase in which it is important to gather all of the necessary goods and supplies for the project. We recommend that you use distilled vinegar, as well as other better alternatives, for best results.
Brush off the tent mold
To remove the apparent mold off the tent, use a soft brush to scrub it away. This should be done with caution.
Wear a non-porous gloves before cleaning with vinegar
Experiencing skin irritation after being exposed to vinegar for an extended period of time is not recommended.
Protect your hands from the impacts of vinegar’s natural and organic composition effects by wearing protective gloves.
Fill a spray bottle and fill with distilled white vinegar
Make certain that the pure vinegar is not diluted with water. As a result, make sure you have enough vinegar to thoroughly clean all of the mold-affected surfaces in your home.
Spray the vinegar thoroughly on affected area of the canvas
Cover the injured area with distilled vinegar to prevent further damage. Make certain that you use a suitable amount in order to achieve greater outcomes. This will ensure that there is sufficient amount to effectively destroy the mold. In the event that you do not have a spray bottle, it is recommended that you use a disposable cloth instead. Afterwards, thoroughly clean the afflicted area to ensure that it is totally saturated with vinegar.
Allow the vinegar to sit for around one hour
Although vinegar removes mold and mildew more quickly than other methods, it does so by breaking down the mold and mildew. It is recommended that you let the tent to set for almost an hour before cleaning it. In this way, the vinegar will have enough time to break down and entirely destroy the mold.
Scrub the mold away with a scrub brush and warm water
Scrub the mold-affected areas with a scrub brush until they are completely clean. These are the parts that have been sitting in vinegar. As you work your way through the moldy areas, make sure to clean your brush with warm water on a regular basis. The use of a scrub brush will aid in breaking up the mold and making it simpler to remove it. Select a brush that is appropriate for the cleaning task at hand. The use of a larger brush will clean a larger surface, whereas a smaller brush may be useful in reaching into crevices.
Wipe the affected areas clean
Once you’ve finished removing the mold from the tent’s surface, use warm water to wipe the surface clean. If the mold continues to grow, repeat the same procedure until all of the mold has been removed from the area. However, it is likely that vinegar will leave behind a strong, disagreeable odor that will dissipate fast once it has been exposed to air.
Dry the tent
This is the sixth stage in the process of removing mold from a camping tent. Tents should be hung to dry in the open air. Alternatively, you may erect the tent and let it air dry that way to ensure it dries quickly. It is absolutely vital to allow the camping tent to dry completely before putting it away for the winter season. If the tent is left moist or wet for an extended period of time, mold will soon develop. This might lead to fast mold development, which will need extensive cleaning to eliminate.
Mix vinegar with other products to boost its killing power
Vinegar is estimated to be effective against around 82 percent of the various mold species tested. If this is accurate, then there is an 18 percent chance of a persistent species re-emergence in the future. As a result, it is recommended that vinegar be mixed with either hydrogen peroxide, borax, salt, or baking soda. Make sure not to combine vinegar with bleach, since this might result in noxious and perhaps hazardous fumes.
Spray tent with vinegar to curb future mold growth.
There are around 82 percent of mold species considered to be killed by vinegar. If this is the case, there is an 18 percent chance of a persistent species re-emergence in the future.
As a result, it is recommended to combine vinegar with either hydrogen peroxide, borax, salt, or baking soda to get the desired results. However, do not combine vinegar with bleach as this might result in hazardous and harmful gases being released.
If your tent becomes moldy, it is vital to follow certain recommendations. Due to the fact that the tent will be safe to use, the next camping trip will be unforgettable! Soft bristles are perfect for eliminating loose mold, and they may be found in a variety of colors. In this scenario, we propose using specific mold cleaning solutions, such as vinegar, which totally eliminates mold spores. Vinegar can be used with other ingredients such as hydrogen peroxide, boric acid, salt, or baking soda to increase its killing effect.
Nonetheless, there are various home-based mold removers available, including hydrogen peroxide, lemon juice, a mixture of salt or vinegar and water, and a combination of these.
The most effective method of preventing future mold infestations is to keep your tent as dry as possible over the whole season.
In addition, avoid storing your tent in a moist or hot environment to avoid mold growth.
Finally, make sure to keep your freshly washed tent in a cool, dry location.
Take pleasure in your new tent.
or one of its affiliates.