How To Fix Plastic Windows In Tent Trailer

Quick Answer: How To Fix Plastic Windows In Tent Trailer

Is It Possible to Repair Vinyl Windows? Yes! The majority of vinyl window frames may be repaired if they have sustained minor damage. A vinyl window’s construction is a meticulous composition of two to three panes of glass separated by a gap, which is often filled with gas, and sealed firmly with a PVC sash that is welded to the frames of the windows.

What do you clean pop-up camper windows with?

You may maintain the vinyl on your pop-up camper by washing it with dish detergent and water on a regular basis or by using a vinyl cleaner and then spraying it with a protectant spray. Before putting your pop-up camper away for the winter, make sure the vinyl has completely dried.

Can you replace the canvas on a pop-up camper?

Many RV, travel trailer, and pop-up camper owners like doing their own repairs and modifications. If, on the other hand, you’ve never replaced the canvas on your pop-up camper before, you’re in for a fun-filled day or two. Most recanvassing services do this on a full-time basis, and they are capable of replacing canvas even while blindfolded.

Are pop up trailers waterproof?

Pop-up campers are waterproof when they are first purchased, however they may lose their waterproofing with time. The quality of a vintage pop up camper canvas may not be as excellent as it was when it was first purchased. As a result, waterproofing may be required at various points throughout time.

How long will a vinyl window last?

Vinyl windows have a lifespan of between 20 and 40 years on average.

How do you clean plastic windows on a tent?

A few tents contain windows made of flexible plastic. If you don’t have an owner’s manual, you may wash them gently with warm, soapy water and a soft cotton or microfiber cloth instead. Afterwards, rinse them well until all soapy residue has been removed, and dry them with a soft cotton or microfiber towel. If the windows have screens, clean them in the same manner as indicated above.

How do you repair a tear in a canvas tent?

What is the best way to repair small tears and rips? Take a piece of canvas and cut a little area in the middle of it. Glue the patch to the interior of the tent, making sure that it completely covers the rip in the fabric. Re-create the procedure by gluing another patch over the tear and attaching it to the tent’s outer. Make sure the patches are well-supported and allow the adhesive to cure completely before moving on.

What is the best replacement windows on the market today?

Top ten best replacement windows for your home Milgard Windows and Doors Simonton Windows is a company that makes windows. Windows on the outside. Windows in the atrium. Marvin Windows is a company that manufactures windows. Windows manufactured by Jeld-Wen. Weather Shield Windows are a type of window that protects against the elements. Windows from Champion. Champion Windows is one of our most highly suggested options for customers who are seeking for custom-built replacement windows in their homes.

What time of year is best to replace Windows?

Replace windows when the weather is warm but not too warm, such as in late spring or early summer, provides a number of advantages over other times of year.

If you’re replacing numerous windows at the same time, doing it while the weather is still pleasant outside can help prevent unwelcome chilly drafts from entering your house while the process is underway.

What’s wrong with vinyl windows?

In addition, while all windows expand and contract in response to temperature changes, vinyl expands by more than twice the amount that wood windows do. With each degree of temperature increase, it expands seven times as much as glass does. It is possible that the seal between the vinyl framework and the glass will fail as a result of this. Vinyl windows have only been in use for around 20 years, according to industry experts.

Can vinyl windows last 30 years?

Each type of window material needs a particular amount of upkeep and care. The life expectancy of windows can be significantly shortened if they are not given sufficient care and frequent maintenance. However, with appropriate care and maintenance, high-quality wood, fiberglass, and vinyl windows may survive for several decades.

How do you fix a small hole in canvas?

Place the painting face-down on a clean surface and allow it to dry. To apply the repair fabric, use an acid-free adhesive (such as “white” craft glue) to adhere it. If you don’t have any glue, you may use an acrylic primer like acrylic gesso or a matte or gel media as a glue substitute. Apply a thin, even coating of glue, gesso, or medium to the patch and apply it over the tear. Let it dry completely before moving on.

Do all vinyl windows warp?

Prepare a clean surface by placing the artwork face down on it. To apply the repair fabric, use an acid-free adhesive (such as “white” craft glue). Glue can be made from a primer such as acrylic gesso, or from a medium, such as matte or gel media. Placing the patch over the tear requires a thin, uniform coating of glue, gesso, or medium to be applied.

How long does canvas last on a pop up camper?

Canvas on a Pop-Up Camper has a lifespan of around 15-20 years on average. The life expectancy of the canvas, on the other hand, may vary depending on how well it is kept and preserved. If the canvas is cleaned on a regular basis, stored dry undercover, and kept in a clean atmosphere, it will endure for many years longer, maybe up to 20 years.

What is the best vinyl window on the market?

The Most Reliable Vinyl Window Manufacturers Simonton Asure Windows are the best value. The Simonton Impressions Window is the most popular/midgrade option. Simonton ProFinish Brickmould Windows are a premium product. Vinyl Windows from the Ply Gem 400 Series are the best value. Ply Gem 2000 Series is a popular and midgrade product. Ply Gem Premium Series is a high-end product. Encompass by Pella Vinyl Windows is the best value on the market.

How long do cheap vinyl windows last?

However, although low-cost vinyl windows can fail within a few years, high-quality vinyl windows will survive for 20 years or more, with some lasting up to 50 years.

How do you clean the vinyl on a pop-up camper?

Cleaning the tent with a moderate detergent and water can remove small stains, dirt, and other debris from the external (or vinyl) side of the tent. Make careful you only use a sponge or a soft cloth while cleaning, since a brush might cause harm to the material. After thoroughly rinsing the tent, wipe it off or allow it to air dry.

What are pop-up camper windows made of?

Because the vinyl windows of pop-ups are often constructed of the same material, you may use the same cleaner to remove the filth and buildup for a crystal clear view! The 29th of August, 2016.

Repair vinyl window

6th of October, 20193 I just repaired my windows, which were beginning to fall apart where they were sewed to the zipper fabric, which I had previously repaired. Sailrite had a yard of 12 gauge (0.012-inch thick) plastipane vinyl for sale, so I purchased that. I eliminated the canvas parts from the sides of the popup. In order to cover the straight areas, I cut the plastipane into strips that were 1-1/8 inch wide. I worked with strips that were about 2-feet long in order to keep the bonding and alignment under control.

  • After that, I unzipped the plastipane and stitched it to the zipper fabric with my sewing machine, using T-90 poly thread as the thread.
  • This worked for me because the cloth for the window and zipper was still in excellent condition.
  • One window was 3 by 8 feet, making it difficult to manage the full canvas part on the sewing machine, but it was manageable.
  • Share:Facebook TwitterReddit Pinterest TumblrWhatsApp EmailLink

Latest posts

  • My favorite mods, tips, and tricks (as well as blunders!) are included below. I made the decision to join the Dark Side.
  • Going to the DARK SIDE
  • ECLIPSES OF 20232024 – Have you begun to make preparations for the future?
  • General Camping Discussion Forum
  • Aliner hitch – open and shut case
  • Aliner hitch – open and shut
  • Tow vehicles and hitchtowing
  • Nearly a year on the other side of the world

Best way to repair plastic window to canvas seams?

There are several methods for repairing damaged canvas, including iron patches, stitching, and liquid stitch, all of which have been tried and tested with great success by members of the forum. We’ve patched the holes using iron-on canvas patches, and I’ve repaired rips (where edges meet perfectly) with fishing line before applying seam sealant on both the inside and outside of the patch. It has performed admirably, with no leaks. If the vinyl window has just separated from the canvas, you may use the same procedure I did to sew the canvas back together, or you could remove the panel and take it to an upholstery shop or marine shop for repair and reinstallation.

  • People have been using Performix’s VLP Vinyl/Leather repair kit for minor holes in their vinyl bunk ends for years to fix them.
  • I had holes in my vinyl bunk ends (thanks to those pesky insects) that ranged in size from a golf ball to practically a baseball.
  • Because of the webseal’s fabric-like texture, it is possible to paint it in order to match the vinyl color.
  • A roll of RV Awning tape (also known as tenacious tape) is a useful item to keep in your PUP tackle box since it is excellent for making repairs.

I also have a needle and thread on hand in case a rip occurs in the canvas or in the screen. Wishing you the best of luck on your PUP hunting trip; it sounds really exciting!

Hanna Trailer Supply

Brands: PK-VINYL-CLEAR is the product number. PK-VINYL-CLEAR is the vendor number. $34.99$27.99 Vinyl Window Material Repair Kit for Pop-Up Campers (Clear) A link to this product’s data-lightbox is as follows: ” data-lightbox=”product” href=” rel=”/GenCart/ProductImages/PK Vinyl Clear Kit.jpg”>PK Vinyl Clear Kit $34.99$27.99 You Save $7.00 on this purchase (20.0 percent )

Attention Customers:

These are the only goods we have available for pop-up campers, and they are all mentioned on our website. We are unable to place custom orders for any products at this time, and we are unable to give technical support owing to the enormous amount of orders we are currently receiving. Thanks for taking the time to read this. People also shop, as described in the description. This repair kit allows you to perform a quick, simple, and long-lasting repair to the damaged vinyl window on your boat or camper.

This kit contains the following items:

  • One 18″ x 16″ clear vinyl fabric patch
  • One 1 Ounce Tube of Clear Performix VLP Adhesive
  • One 18″ x 16″ clear vinyl fabric patch
See also:  What Is A 1990 Jayco 1006 Tent Trailer Worth

Prop. 65 Warning for California Residents

WARNING:According to the State of California, this product may contain chemicals that are known to cause cancer, birth defects, and other reproductive damage. JavaScript must be enabled in order for the site to function properly.

Cleaning {& Protecting} Your Vinyl Camper Windows

At the time of purchase of our first pop-up camper, the windows were dusty and unclean. After we cleaned the canvas (you can find detailed instructions on how to do so here), they appeared to stand out even more. However, despite my best efforts with washing and water, they remained soiled and discolored. They were still in a bad way. I wasn’t sure we’d ever be able to restore them to their former glory, but I was determined to give it a shot. Several huge black spots were visible on the windows (as seen above) and I wasn’t sure if they were going to come out or not.

  1. Honestly, we couldn’t fathom finding anything that would truly restore the clarity of these kids’ vision.
  2. Isn’t it true that it’ll never look the same again?
  3. Moments before throwing in the towel, I recalled theProtectAll that we had applied on the vinyl siding of our trailer (you can see that here).
  4. Because it performed such an excellent job on the exterior, I decided to give it a shot on the inside of our windows.
  5. Justin applied it with a sock that was completely clean and white.
  6. Reapply the cleanser and wipe clean before buffing again if streaks appear.
  7. It’s a bit time-consuming, and getting to the very bottoms of the inside of the windows might be difficult at times.

You can see for yourself how effectively it worked in this case.

It was quite amazing how effectively it cleaned these windows and glass.

Both are available for purchase on Amazon and at Wal-Mart stores.

There will be no more dark markings or hazy discolouration.

They have the appearance of fresh new windows.

See for yourself how well ProtectAll performed in this side-by-side comparison below.

In fact, it was such a success that we now include it in our annual spring cleaning regimen.

We haven’t had any recurrence of yellowing, therefore we are satisfied!

It’s a quick and simple adjustment that can make a significant difference.

It is the intention of The Pop Up Princess to participate in the Amazon Services LLC Associates Network, an affiliate advertising program designed to offer a mechanism for sites to make advertising revenue by promoting and referring to

If you choose to purchase an item after clicking on a link in this post, The Pop Up Princess will get a small advertising charge, which will be used to fund future projects and postings. as a result, thank you! Camping is a blast!

Replacing the Window Screen in a Popup Camper?

The 21st of June, 2017 One of the windows on our popup has a couple of large holes in it. Do you have any suggestions about how to replace the entire screen? It is sewed into the garment. There is no way to remove the window to sew it on a machine since it is too small. I’m at a lost for words! Any suggestions would be much appreciated.


JudyGold Post a Medal for All Time on the wall! 677 comments have been made. This was beneficial to me on June 22, 2017. The Most Effective Response Screen Mend is a product that you may purchase to repair your screen. It was featured on Shark Tank and is available in a variety of retail outlets as well as on Amazon. The heat from a blow dryer is used to secure it in place. Reply Was this information useful? 1cybergrannieGold All-Time Medal for Customer Satisfaction! 949 people have left feedback The 25th of June, 2017 This was beneficial to me.

  • To get some recommendations, I recommend that you go to a camping equipment store or a camper repair shop and ask for help.
  • things to take into consideration; Is this one of the extra-large windows, or are the holes in the glass of a more modest size?
  • If it is the larger screen, it may be very tough to change the complete screen, but it is still feasible, I am confident.
  • What if you only take a portion of the screen out?
  • My memory recalls seeing a camper that had a lengthy strip across the screen opening (outside), which had been glued at the ends and in other locations, as well as stitched and/or stapled in a number of spots.
  • DCABronze Answer Medal for All Time!
  • There are 220 responses.
  • You may purchase the same sort of screening material as the present screen and attach the repair parts to the existing screen to complete the project.
  • I would take out the screen, leaving two inches of the previous screen in place, and then replace it.
  • After that, I would whip stitch the new screen in place using a strong fishing line to hold it in place.

When the new additional screen is sewn in place, tuck it into the window’s crack or cover the edge of the window with duck tape folded double over the edge. It would be great if you used the entire screen instead of just a section of it. Continue readingAnswers

window separated from zipper

Author Topic: window separated from zipper(Read 11302 times)
Square Dance CamperHandle CrankerOfflinePosts: 50Metuchen, NJ

The plastic part of the window separated from the zipper, about an 8 in section.Zipper still works, how do I reattach the plastic so it doesn’t separate all the way around?Short of using duct tape.

1998 Dodge Ram 1500 2004 Fleetwood Redwood Me, DH, DS, DS

starfireWheel ChockerOfflinePosts: 21

I have the same problem so I hope some people give good advice.I have a 89 Starcraft Nova and the back side canvas (behind sink, stove and table) seems really tight.The plastic has torn away from the zipper because it is so tight.

coboKindlin’ CollectorOfflinePosts: 4

should have read further before placing my own post. I also have this problem on my back window. ’89 Starcraft Starmate. I am also missing the 2-3 plastic pieces that hold the window away from the counter and table. Will be watching.

Xplore This!Back-er-in-erOfflinePosts: 1050

I also have the same problem. There is a 5 year warranty on the tenting material and this is the last few months of it. I will be taking it to the dealer for repair/replacement under warranty. We will see what they do and how it goes.


This is a simply automotive upholstery shop job.Here’s what I’ve done on the Starcrafts I’ve worked on (it’s a very common tear on that left side canvas due to the roof lifting too high on that side, the canvas being pulled too tight, and then the owner starts forcing the zippers):1) Remove that canvas.You’ll need a clutch head screw driver, or a clutch head bit for a driver that’ll hold a 1/4″ socket and the bit will fit in that.Takes about 10-15min2) Fold the canvas neatly/carefully and take it to your favorite automotive upholstery repair shop.If you don’t have one, find the mompop one in town, or find the one that has all the newly restored cars sitting around getting their interiors done.3) This is a simple repair and here’s what I ask to have done:Using a 1″ wide (or similar) strip of velcro.the fuzzy side.they’ll have it on a roll in black.have them trim off the edge of the window so it’s smooth in the area where the stitching tore out.Sew that fresh edge of the window to one edge of the velcro with the fuzzy facing to the outside.Sew the zipper to the other edge of the velcro.The velcro strip is super strong nylon and it won’t uravel on the edges like a piece of cut material or canvas would.Plus, because it’s a finished piece of material, it doesn’t need to have it’s edges turned under, creased and sewn to keep it from unraveling.So this makes an outstanding repair that you’ll never notice.It adds some height to the plastic window so that it isn’t pull so overly tight from now on, and most importantly, it keeps the automotive upholstery guy happy because it’s quick and he doesn’t have to screw with some meaningless project that not going to make him any money and is going to waste a lot of his time.This will take about 10min to sew up.4) You can use the velcro fuzzy strip trick to do the window straps too.Turn it fuzzy side out.Super easy and quick, and because it’s black, it’ll look just like it looked from the factory.they just used sewn up window material.5)Pay in cash, and give him a tip.You want to make a friend in case you have other canvas sewing needs in the future!

Square Dance CamperHandle CrankerOfflinePosts: 50Metuchen, NJ

I don’t think I’m reading this right.Nothing has separated from the canvas, I’m talking about the clear plastic part of the window separating from the zipper.The canvas is fine, the zipper is fine.If I could melt the plastic window back to the zipper, it would work.Maybe some clear packing tape before it separates all around. How would you sew velcro to the clear plastic?

1998 Dodge Ram 1500 2004 Fleetwood Redwood Me, DH, DS, DS

Xplore This!Back-er-in-erOfflinePosts: 1050

I don’t think I’m reading this right.Can you post some pics?


I don’t think I’m reading this right.Nothing has separated from the canvas, I’m talking about the clear plastic part of the window separating from the zipper.The canvas is fine, the zipper is fine.If I could melt the plastic window back to the zipper, it would work.Maybe some clear packing tape before it separates all around. How would you sew velcro to the clear plastic?Re-read my instructions.They detail how to make this repair, exactly.

waveryPUX is my lifeOfflinePosts: 13190TrailManor.TRUE Pop-Up

I don’t think I’m reading this right.Nothing has separated from the canvas, I’m talking about the clear plastic part of the window separating from the zipper.The canvas is fine, the zipper is fine.If I could melt the plastic window back to the zipper, it would work.Maybe some clear packing tape before it separates all around. How would you sew velcro to the clear plastic?The zipper is probably sewn to the plastic window in the first place.I used to have a Marine Custom Canvas business. Sewing through isinglass (your plastic window) is simple.Iwould not use the Velcro as mentioned above for a variety of reasons. If your canvas is Sunbrella, it is easily cut with a hot-knife to prevent unraveling. I would use a double hemmed piece of matching Sunbrella or binding tape that matches the zipper, to make that addition piece (but that’s just me). Often times, the zipper is sewn to Sunbrella and the Sunbrella sewn to the isinglass. It just depends on what you have. Any canvas shop or sail-maker will be able to just do the repair with suitable material. I think that I would just ask then to put in a 1″ extension piece as mentioned above and let them sort it out.You may have a awning shop, sailmaker or canvas repair shop in your town also. They are much more familiar with sewing isinglass and Sunbrella than an automotive upholstery shop (unless they do convertible top work).Oh.and one more thing. neverfold isinglass (if you can help it). Always roll it up for transport.

«Last Edit: September 13, 2009, 10:38:34 am by wavery» Logged

Wayne, CarolynSccamp19grandkids.Southern California- ’98 Winnebago Adventurer 33’160W Solar Panels, Dual 6V BatteriesEX PU-’04 Trailmanor 2720SL.3X PU ’02 Coleman TacomaEX- TV – 2006ChevySilverado 1500(ext cab) 157″ WB.


‘cept that the plastic windows get fold when the camper is closed up.I wasn’t meaning that someone should fold their canvas into tight creases.I just ment fold it “neatly” as in, don’t just wad it up and cram it into the trunk.Reason why the nylon strip of velcro works so good is that it’s strong, doesn’t fray, doesn’t need the edges cut, or folded over and sewn, or any other treatment.Just pull what you need off the roll and sew into place.Makes it a 15min repair.

parrotheadsHandle CrankerOfflinePosts: 33

austinado, I have the same problem as op, and I’m having trouble visualizing the finished repair.Do you have any pics of that repair?I understand the process you’re explaining, just not understanding how it will be unnoticable when done.Thanks.

ChrisDave Thing 1Thing 2 2005 Nissan Pathfinder 4wd 2001 Coleman/Fleetwood Cheyenne


austinado, I have the same problem as op, and I’m having trouble visualizing the finished repair.Do you have any pics of that repair?I understand the process you’re explaining, just not understanding how it will be unnoticable when done.Thanks.Sorry, I didn’t take any photos of it and the camper is gone now.But, it was such a nice repair, it was not visible unless I pointed it out.Just to be clear, the velcro I’m taking about is the stuff that upholstery shops use.It comes on a big roll, like 20′ of it or something.It comes in various widths and I think we used 1″ wide.This type of velcro is a tightly woven nylon-cloth what you see to each side of a zipper.and the fuzzy velcro material is just inward from the edges maybe 1/8″.We sewed the plastic window right to that nylon-cloth backing, right along the edge of the velcro strip.Then on the other side of the velcro strip, we sewed the zipper.We did it so the fuzzy stuff faced to the outside, so that the only thing that faced the inside of the camper was that nice nylon-cloth backing material, which was black and matched the black plastic tinted window.Doing it like that effectively made the window just slightly wider by about 3/4″ and therefore took all that tension out of the stitching that had originally caused the stitching to tear out in the first place.Really a super easy, fast, and nice looking repair, that’s permanent.

Square Dance CamperHandle CrankerOfflinePosts: 50Metuchen, NJ

Now I know why I couldn’t visualize this.My windows are clear, not tinted plastic.

1998 Dodge Ram 1500 2004 Fleetwood Redwood Me, DH, DS, DS


That shouldn’t make any difference.Instead of using black, you could choose a color that matches the color of the zipper’s fabric.

Square Dance CamperHandle CrankerOfflinePosts: 50Metuchen, NJ

Thanks, now I get it, I can see it in my head and explain what I need to get it done.

1998 Dodge Ram 1500 2004 Fleetwood Redwood Me, DH, DS, DS

Pop up Camper Repair

Here’s everything you need to know about pop-up camper repair, including what you can do yourself, how to do it, and when expert assistance is required. Pop-up campers are less durable than the majority of other recreational vehicles, which is why they require more frequent repair and maintenance. Because pop up campers do not have a very sophisticated design, you should be able to repair them on your own with the assistance of some helpful advice. When purchasing a used camper, it is critical that you be familiar with the process of fixing it.

  1. While most of the pieces of a pop up camper can simply be replaced, you can also repair tears in the canvas, a broken crank, the roof of the camper, a flat tire, lifted linoleum, and other frequent problems that these vehicles encounter on a regular basis by yourself.
  2. After a while, the canvas is damaged by the wind, the sun, and the humidity.
  3. There are a variety of options for repairing the canvas of the camper.
  4. You can repair the little tears and rips yourself if you use a strong thread and a needle.
  5. Because the fabric is extremely stiff, you may find it necessary to use a thimble to make sewing simpler.
  6. Larger rips and breaks in the canvas must be repaired, otherwise the canvas may lose its waterproofing properties completely.
  7. In order to avoid tearing the canvas further, make sure that the patch is at least one inch larger in size than the region of the tear.

The best patch is round, because it has no corners and is therefore more durable than a square patch.

After it has dried, apply a waterproofing solution to the patched area.

If part of the cloth is bad, cut away that portion as well as an additional 2 inches surrounding it.

If the canvas has come loose from the top of the pop-up camper, use screws to secure it back together or replace the brackets that keep the canvas in place.

Part 1: What was expected to be a quick and simple remedy turns out to be far more complicated.

And now, the work is completed!

Make certain that the canvas is stretched and strong, otherwise it will be easily destroyed by the wind and rain if not properly prepared.

Secondhand campers should be waterproofed before being utilized.

If the canvas of your pop-up camper is leaking and the interior becomes damp, you do not have to replace the entire canvas.

On a bright day, set up the camper outdoors, wash it with soap or washing liquid, and allow it to dry completely.

Coat the canvas a second time to ensure that the waterproofing is long-lasting.

What is the best way to make canvas waterproof?

Before using a used camper, it is recommended that it be waterproofed.

If the canvas of your pop-up camper is leaking and the interior becomes damp, you do not have to replace the entire canvas.

On a bright day, set up the camper outdoors, wash it with soap or washing liquid, and allow it to dry completely.

Coat the canvas a second time to ensure that the waterproofing is long-lasting.

Zippers are not functional.

The most frequently encountered issue is either that the zipper refuses to zip or that it becomes stuck.

When it comes to the second issue, you can apply lubrication rather than push the zipper.

Instructions for repairing the crank and lifting system The lifting system for a pop-up camper is the most important component of the vehicle.

It is possible to repair this system by inspecting and replacing individual components such as the winch, pulleys, and cables.

If the lifting system is not operating properly, you must inspect the pulleys, cables, and crank as well as other components.

Raise the pop-up camper with the help of another person by lifting the roof and fastening it in place with clamps.

Remove the panels off the car so that you can view the wires and pulleys on the corner of the vehicle.

If the crank and pulley appear to be stuck, lubricate them with oil, such as white spray on lubricant, to free them from their jam.

Locate the distribution block of the system by consulting the car’s owner’s handbook.

At this stage, all four wires come together.

If you detect that cables are damaged, replace the entire set of cables rather than just the section that is defective.

Awning that has been damaged First, you must extend the awning in order to repair it.

Remove the inner shaft of the awning and position the holes on the awning to do this.

The final step is to unscrew the fasteners and remove the awning from the wall.

Depending on the extent of the damage, you may need to replace the torsion assembly.

For this reason, a wrench should be used instead.

Ensure that you complete these procedures on both sides of the awning.

How to make the screen work again It is also possible for the pop-up camper’s screen to be torn or ripped.

Apply two applications of it and wait a few minutes before applying the second coating.

If the screen is severely broken, it may be necessary to replace the entire device; screens may be obtained at any hardware shop or online.

Wires that have been broken or damaged are the source of this problem since they no longer create an ideal connection.

First, ensure sure the pop-up camper is not connected to any electrical outlets before you start working.

Once you have identified the wires, it will be simple to determine which one is damaged.

Instructions on how to repair a Jayco Popup Camper are provided in Part 1 of this article.

Pumping water is not working properly.

When the water pump is not operating, the first thing to check is whether there is water in the water tank.

Check for leaks in the water supply line as well.

If the battery is damaged, it should be replaced and the process repeated.

Hinge problems are the most common reason of doors that won’t close.

Once the hinges appear to be in position, tighten the screws to secure them.

Upholstery cushions that are filthy Before you replace worn-out cushions in your pop-up camper, take a look at these easy-to-follow instructions for restoring their appearance.

You should hand-wash them in cold water to prevent shrinkage.

You may use warm soapy water to clean them, but avoid getting them too wet.

Once the coverings have been allowed to dry fully, replace them.

Pop-up campers use tiny tires, usually 12 or 13 inches in diameter.

Check to see that thewheel bearings are properly lubricated, or ask the vendor to perform this task when you acquire thetires.

To change the tires on the pop-up camper, elevate it with the jack and change the tires.

Replace the lug nuts once the tire has been mounted to the axle.

Rooftop vent that has been damaged The effects of water and sunlight on roof vents are rapid, and they can be easily damaged by branches of trees that pass by while driving.

Purchase a replacement vent and install it in the same manner as the original.

More information about roof repair may be found here!

All of the lights in your pop-up camper are linked to the central cluster of cables within the camper through the front panel of the camper.

Change the wires by joining them to the cluster of cables and to the lights of the pop-up camper, as shown in the picture below.

There are a variety of options for repairing the floor, depending on the material that has been damaged.

Linoleum flooring is the most forgiving sort of flooring to work with.

If the flooring has been lifted or damaged, it is preferable to replace the entire floor.

The flooring is made of metal.

Sometimes the metalsheet on the floor of the camper might be corroded and damaged.

If just a tiny portion of the surface has corroded, remove the rusty portion of the surface, as well as about 5 further inches surrounding the damaged portion.

Drill holes around the perimeter of the space, one every 2 inches, to ensure its security.

Screws should be used to hold the metal sheet in place over the hole.

Creating metal and linoleum patches is simple; but, when working with a wooden floor, it might be more difficult to produce the proper sort of patch without making it too noticeable.

With this mixture, you will obtain a smooth texture that is similar to wood in appearance.

It is also easy to install.

We all know that camping is enjoyable and exciting, and that repair should be just as simple and not as time-consuming.

The wonderful thing about pop-up camper repair is that you can order the parts you need and complete the job yourself.

The 5 wheeler and the 2 wheeler are both extremely durable, but they may require some repair if they are older and have been used extensively.

The camper will almost certainly be less expensive to repair.

Campers are far more pleasant than anything that needs to be repaired by another person.

If you ever find yourself in need of something and you happen to be in the area, check out the store.

Repairs are not common, and in some cases, they are necessary because the owner made a mistake or because nature took her course with the camper in question.

Everyone should be equipped with the knowledge necessary to locate low-cost parts at a reasonable price.

Page at the top of the page.

More information about us/privacy policy/resources From Pop up Camper Repair to Pop Up Campers Trailer Home, it’s a short walk. ac unit for pop-up camper trailers, pop-up camper shells, and pop-up camper parts Because I am an Amazon Associate, I earn money when people make qualifying purchases.

How To Clean Pop Up Camper Vinyl (Step-By-Step Guide)

The freedom and delight that comes with exploring in a pop-up camper, however, comes with a price, as you will discover. If you camp outside or travel through muddy terrain to get to a campsite, your pop-up camper functions as a magnet for dirt and grime because it attracts so much dirt and grime. Even if the appearance of your pop-up camper is not your major concern, neglecting to clean it might result in significant damage and expensive repair bills. In order to help you, we’ve created a comprehensive tutorial on how to clean pop up camper vinyl, as well as answers to some of the most often asked concerns.

Why You Should Clean Your Pop-Up Camper Vinyl Regularly

The canvas or vinyl pop-up part of most pop-up campers, or a mix of the two, is used to construct the structure. Both materials give dependable protection from the elements, but they are prone to damage and become filthy rapidly after being exposed to them. Important: In this article, we’ll go through how to clean the vinyl on a pop-up camper. You can learn more about cleaning the canvas by reading our guide on how to clean pop up camper canvas the proper way, which includes step-by-step instructions.

Your pop-up camper most likely does not look anything like it did when you first bought it, whether it is due to dirt and filth from highways and nature trails, terrible weather, bird excrement, or tree sap.

Fortunately, this is something you have control over, as long as you are ready to put in the necessary time and effort to maintain your vinyl pop-up.

Cleaning is rather basic, and it is something that everyone should be able to complete on their own time.

Step 1: Inspect Your Pop-Up Camper

The initial step is also one of the most crucial steps to take. Check your pop-up camper carefully and mark any trouble spots on the vinyl that may cause problems while cleaning using a permanent marker. Take note of any residue, stains, or scratches that may require more care than the regular cleaning procedure calls for. To remove sticky and greasy buildup caused by engine oil or other unknown chemicals, make a multi-purpose cleaner that is suitable for vinyl and won’t damage the pop-up screen.

Cleaning is also a wonderful time to make any small repairs to the vinyl that may be required throughout the process.

Mildew spreads swiftly and has the potential to cause significant damage to vinyl.

Step 2: Scrub Down the Vinyl Pop-Up

There are two approaches you may take in this situation. One method is to use a professional vinyl cleaning solution, or a DIY mixture of water, dish soap, and bleach for persistent stains, which may be found here. The 303 Multi-Surface Cleaner is a good choice if you prefer the former approach. Even the most sensitive surfaces and textiles can be cleaned with this incredibly strong spray cleaner, which is also kind on the environment. You may, however, start with a DIY solution if you have the resources on hand and then transition to a professional cleaner if you come across regions that you are unable to clean yourself.

If there are any greasy/oily stains or residue, you can use bleach to remove them.

Never use a hard scrub brush or apply excessive force to the surface.

It has already been indicated that if there are any spots where the DIY solution and elbow grease are ineffective, use either a multi-purpose cleaner that is vinyl-safe or a professional vinyl cleaning solution from an established company such as a renowned manufacturer.

Step 3: Wipe Down the Vinyl

After that, we’ll need to wipe away any remaining cleaning and residue from the vinyl. It is preferable to use a clean microfiber cloth or sponge for this stage, as well as fresh water. Use a soft cloth to gently wipe away all soap and debris until you can see the vinyl’s smooth, clean surface. If you find any mildew that the soap and cleaning solution were unable to eliminate, you should apply a mildew removal solution recommended by a specialist.

Step 4: Spot Check the Vinyl for Holes and Leaks

This is also an excellent opportunity to visually inspect your vinyl pop-up camper for any cracks or holes that might potentially cause leaks. If you come across any spots that require repair, make sure you utilize a professional solution or adhesive to complete the job. This is the only method to ensure that the integrity of your vinyl is maintained and that any repairs are watertight when they are completed. If you do find some large cracks and holes in your camper that appear to be a bit too difficult to repair at yourself, do not hesitate to contact the manufacturer or your local RV dealer about having it repaired.

Step 5: Add Protection

After you have thoroughly cleaned the vinyl, it is time to apply a layer of protection to it. One of the most serious problems is that, as a result of prolonged exposure to the environment, vinyl becomes more stiff and susceptible to breaking. Aerospace protectant sprays, such as 303 MarineRecreation Aerospace Protectant, are the finest choice for this job. To apply 303 MarineRecreation Aerospace Protectant, follow these steps:

  1. Make sure the vinyl you’re going to treat isn’t in direct sunlight when you’re doing it. 303 MarineRecreation Aerospace Protectant should be sprayed onto the vinyl surface. Remove the vinyl as soon as possible and properly dry it

Remember not to allow any of your camper’s canvas to come into touch with the protectant spray, as this might cause damage. The greater the protection, the shinier and more uniform the finish you are able to create. Protectant sprays should be effective for at least a few months, depending on how frequently you use your pop-up camper trailer.

Step 6: Let the Vinyl Dry Out and Close the Pop-Up Camper for Storage

We cannot emphasize enough how critical it is to allow the vinyl pop-up to dry completely before shutting it: closing a still-wet vinyl pop-up is a recipe for mildew. If you do not utilize your camper on a regular basis, you may not notice the mold problem until it is too late, and the expense of repairing the vinyl can be prohibitively expensive. Before sealing the camper into its shell, make sure that the vinyl is totally dry. Otherwise, it may crack.

Step 7 (Optional): Clean the Camper Shell

Having taken care of your pop-up tent’s soft vinyl and secured it with velcro, it’s time to do the same with the camper shell that shelters it. When working with soft vinyl, you may use the same approach and solution as when working with hard vinyl; however, you have the option of applying greater pressure. Remove the soiled soap by rinsing well with clean water and drying thoroughly with a cotton towel. Apply a protective coating with a spray or wax and buff it into the surface until it is uniformly distributed.

Then you’re through for the day!


This is totally dependent on how frequently you use the camper and under what conditions you use it.

Keep in mind that if you are highly active and your pop-up tent becomes muddy and dirty frequently, you should properly clean it after each trip. Never store your pop-up camper without first washing it well and allowing it to completely dry before putting it away.

How Can I Protect My Pop-Up Camper Vinyl?

You may maintain the vinyl on your pop-up camper by washing it with dish detergent and water on a regular basis or by using a vinyl cleaner and then spraying it with a protectant spray. Before putting your pop-up camper away for the winter, make sure the vinyl has completely dried.

Should I Use Homemade Or Brand Name Cleaners?

It is dependent on the situation. In addition to being affordable and simple to produce, homemade cleaning solutions such as water and dish soap can often remove 99 percent of any stains that may be present on your pop-up camper. In addition to degreasing and eliminating tough stains more effectively, brand name cleansers require less effort on the part of the user. It is recommended that you acquire a bottle or two of brand name cleaners to keep on hand as a back-up in case you encounter problems with persistent stains throughout your cleaning process.

Camper FAQs is made possible by donations from readers.

Because I am an Amazon Associate, I receive money when people make eligible purchases.

Leave a Comment

Your email address will not be published. Required fields are marked *