What To Wrap Pvc Weed Tent In

How To Build A DIY Cannabis Grow Tent In Just 3 Steps! – RQS Blog

Trying to come up with a simple and cost-effective method of cultivating your own marijuana? As you will see in the following section, it is really simple to construct your own grow tent for a fraction of the cost of a store-bought tent or box!


Growing your own marijuana is a rewarding experience. Making a deeper connection with this ancient plant by germinating your seeds and watching them grow into robust plants with large, scented buds is a wonderful approach to deepen your understanding of it. Not to mention the fact that you’ll almost certainly wind up with a considerably superior product than you would have gotten otherwise. Unfortunately, not everyone has the luxury of having enough room to cultivate plants outdoors in the sunshine.

While tiny grow tents are rather inexpensive, you can construct your own tent for next to nothing if you put in the effort to get the right materials on your own.


Take a few minutes to evaluate the following critical aspects for your tent before you begin shopping for constructing materials: Take into mind the following important elements for your tent:


In order to blossom effectively, cannabis plants require well defined light and dark cycles throughout the day. Light leakage during the dark hours of the day can stress photoperiod strains, limiting their development, interfering with their blooming, or even causing hermaphroditism in the female reproductive system. According to current research, even autofloweringstrains require regular dark hours for respiration, photosynthesis, and other processes. As a result, your homemade tent must be lightproof.


Cannabis requires consistent watering and feeding. In order to prevent runoff or spills from causing harm to the environment surrounding your tent, be certain that it is waterproof.


Cannabis plants require adequate ventilation in order to grow effectively. Hot patches in your tent, on the other hand, might be caused by insufficient ventilation, which can trap heat and humidity, resulting in the growth of germs and the attraction of pests. The ventilation in your tent is critical in order to avoid these issues from arising.


Depending on the amount of space you have available, your budget, and the number of plants you intend to cultivate, the size of your grow tent will vary. However, you may go bigger or smaller than that depending on your needs. A one by one meter tent is perhaps the most popular size used by hobby growers, but you can go bigger or smaller than that according on your needs.

Just keep in mind that if you want your plants to achieve their maximum potential, your tent will need to be at least 1.5–2m tall in order to provide them with enough space to develop and prevent them from growing too near to your lighting.


Depending on the amount of space you have available, your budget, and the number of plants you intend to cultivate, the size of your grow tent will differ. Probably the most popular size used by hobby growers is a 1 × 1 meter tent, however you may go bigger or smaller according on your requirements. Just keep in mind that if you want your plants to achieve their full potential, your tent will need to be at least 1.5–2m tall in order to provide them with enough space to develop and prevent them from growing too near to your lights.


PVC pipes with a diameter of 19mm are strong, inexpensive, and excellent for use in the construction of your tent’s structure. You’ll need the following supplies: For the verticals and horizontals, there are 16x straight pipes (the length of pipe will vary depending on how large you want your tent to be) 90-degree corner fittings: 8 pcs. 4 pieces of t-fittings 1 pair of cross fittings


Panda Film is an excellent choice for the walls of your tent. It’s important to remember to use the black side of the film on the exterior to absorb light and the white side on the inside to reflect light when using reflective film.


There are many various types of grow lights available on the market, but LEDs are our top recommendation because of their energy efficiency and long lifespan. HIDlights are less expensive than LEDs and can give excellent results, but they must be replaced every two harvests and consume a significant amount of energy.


There are a plethora of fans available on the market. For large harvests, we recommend that you use a fan and a charcoal filter to remove the odors from your plants when you’re setting up your tent. If you’re putting up a tent to cultivate a few plants, a conventional wall fan will enough for the purpose.


Once you’ve obtained your resources, you’ll need the following tools to complete the construction of your tent: Duct tape is a type of adhesive that is used to seal ducts (to create the Panda Film covering for your tent) saw with a hand (in case you need to cut any of your PVC pipes to size) Velcro is a type of fastener (for the opening of your tent)


Follow these instructions to construct your very own cannabis grow tent in less than a day, now that you have your ingredients and tools.


If you weren’t able to get PVC in the size you needed, you can cut it using a hand saw to fit your project. In order to construct a tent of any size, you’ll need 16 straight pieces of pipe: four for the verticals (which should be at least 1.5m long), four for the foundation, and eight for the top of your tent. Once you’ve got your straight pieces of pipe cut to size, you’ll need to link them together and construct the frame of your tent using the fittings. Keep in mind that your roof should have a cross fitting in the centre for more stability in order to keep your light, fan, and other accessories securely in place.


This means that you’ll need to cover your tent twice: once inside the tent with white panda film for the interior, and again outside with black film to keep out the elements. Begin by wrapping a single sheet of film securely around three of the four walls. This is the quickest and most straightforward method (the 4th will be the opening of the tent). The film should be secured to the PVC pipes where the opening will be. After that, cover the top of your tent with another piece of plastic film.

Step inside your tent and search for light leaks, which you may seal with duct tape applied from the outside of the tent.

Lastly, cut a length of film long enough to stretch from the centre of the ceiling down to the bottom of your tent to serve as the tent’s opening. Using duct tape, attach it to the ceiling of your tent and Velcro, attach it to the PVC frame on the sides and bottom of your tent.


As directed by the manufacturer, attach your grow lamp to the top of your tent using the mounting bracket that comes with it. Always remember to remove the power wire from the ceiling through a small aperture in the roof and to cover the edges with duct tape to prevent light from leaking through. You’re finished when you’ve only placed your fan on the floor!


It’s time to go growing now that you’ve finished building your own DIY tent. If you want a comprehensive list of all the devices you’ll need to cultivate your plants, check out our page on indoor cannabis growing equipment. And remember to get your seeds straight from our web shop to guarantee a successful harvest! Best of luck with your growth!

Diy easy pvc grow tent cheap! With plans

You are currently using an out-of-date web browser. It is possible that this or other websites will not show correctly. You need either upgrade your browser or switch to another one. Greetings, 420 members! This is my simple pvc grow tent that I made myself. First and foremost, let’s get this over with. Make certain that you have a simple method of putting up and taking down your tent. The design of this tent allows it to be transported and stored with relative ease. How well you ventilate will be determined by you and your systems, as will the location of your holes.

  • 2 “being the most powerful, but also the most expensive I only have one photo of the blueprints at the time, and I apologize if it appears to be distorted.
  • 80 foot PVC pipe is available for purchase.
  • Saddle screw pvc attachments with a snap-on design.
  • Mylar and panda film are used.
  • Duct tape is used to hold things together.
  • 42″x7″x24″6″ 42″x7″x24″6 Now is the time to pre-cut all of your pipes before beginning construction.
  • Finished putting the frame together, wrap the frame in the film, starting with the lower sides and back then working your way up to the top and front of the frame.

Use excess film to make the entrance opening larger than it needs to be, then glue one side of the tent to the tent while using Velcro strips to keep the other side closed while the tent is not in use.

If you have any questions, please let me know.

DIY quick and inexpensive pvc grow tent!

I’m looking forward to the next installment.

This is my simple pvc grow tent that I made myself.

Make certain that you have a simple method of putting up and taking down your tent.

How well you ventilate will be determined by you and your systems, as will the location of your holes.

I only have one photo of the blueprints at the time, and I apologize if it appears to be distorted.

80 foot PVC pipe is available for purchase.

Saddle screw pvc attachments with a snap-on design.

Mylar and panda film are used.

Duct tape is used to hold things together.

42″x7″x24″6″ 42″x7″x24″6 Now is the time to pre-cut all of your pipes before beginning construction.

Finished putting the frame together, wrap the frame in the film, starting with the lower sides and back then working your way up to the top and front of the frame.

Use excess film to make the entrance opening larger than it needs to be, then glue one side of the tent to the tent while using Velcro strips to keep the other side closed while the tent is not in use.

If you have any questions, please ask them here.

Why are there so many horizontal bracing on the back?

Is it for the purpose of rigidity?

It functions flawlessly, however the corner parts are at best doubtful.

The design is in my head, however I need to be able to make the door leak-proof, and the only zippers I can find are junky and let light through.

Home Depot sells 1 1/2 inch I’m pvc for less than $25, which is a reasonable price.

It is designed to prevent the plant bleached out while also allowing for easy removal of the top when the lights are turned on so that heat does not build.

Home Depot sells 1 1/2 inch I’m pvc for less than $25, which is a reasonable price.

It is designed to prevent the plant bleached out while also allowing for simple removal of the top when the lights are turned on so that heat does not build up.

Thank you for your response.

Have a wonderful day. Are there any photos of this project as it progresses? It appears to be an excellent idea; however, I would want to see a finished product rather than a crayon drawing of the concept.

Building Your Own DIY Grow Tent: How And Why You Should Do It

If you’re an indoor grower, there’s a good chance you’re familiar with the concept of grow tents. When used properly, these structures may be a grower’s greatest friend, allowing them to maximize their productivity. They can, however, be prohibitively costly. As part of our Indoor Season series, we’ll look at some of the ways you may save money by making your own DIY grow tent that will be just as effective as a commercially available one.

Let’s Start With What You Need To Know About Grow Tents For Cannabis

When it comes to indoor growing, grow tents provide a plethora of advantages. They are vital tools for growers, because they provide a straightforward method of exerting control over a variety of aspects. Nonetheless, when learning how to construct your own grow tent, there are some important considerations that you should keep in mind.

Key Benefits Of Growing Weed In Grow Tents

First, we’ll go over some of the advantages that grow tents have to offer. Whether you purchase a tent or construct your own, they will assist you in maintaining complete control over all critical climatic parameters such as temperature and humidity. It is possible to grow healthy plants in a tent if you can keep a stable atmosphere in it.

Indoor Cannabis Seeds

VIEW EVERYTHING Tents are also an excellent tool for controlling the amount of light that enters your garden. Tents help to maintain light in your garden during the hours when your grow lamps are on. A weed growth tent, on the other hand, can avoid damaging light leaks during the nighttime hours. Marijuana plants may be fickle and difficult to grow. If they detect any light throughout the night, they may become agitated and transform into hermaphrodites or revert to their vegetative state.

See also:  Late Paying Tent What Can I Do

Requirements For A DIY Grow Tent

There are a few things you’ll need to think about before you start building your own grow tent. First and foremost, the size of your space is really important. Aside from that, you’ll want to make sure your tent has enough light, is somewhat airtight, and has the appropriate temperature, humidity, and ventilation.

Small Plants

A handmade grow tent does not have to be a specific size to be effective. The size of your tent will often be determined by a number of factors, including the amount of room you have to work with and the number of plants you have. Three square feet is one of the most popular sizes among home gardeners (1 square meter). A successful indoor grow will require at least 2 meters (6 feet) of vertical space, so make sure you have plenty of it while you’re erecting your tent.


When constructing your own grow tent, it is also vital to consider the amount of light that will be available. The primary function of a tent is to keep bright light in while keeping bad light out. Your tent must thus be entirely light-proof as a result of this. Many gardeners will tell you that light leaks only occur with photoperiodic plants and not with autoflowering strains, and that this is incorrect. However, this isn’t precisely the situation in this instance. In order to produce adequate photosynthesis and respiration, autoflower strains still require periods of darkness.


When it comes to designing a grow tent, airflow is just as crucial as lighting as the final product. Proper airflow benefits in the prevention of diseases as well as the strengthening of plant stalks, among other things. Unless your tent is properly ventilated, you will not be able to maintain an even temperature throughout your yard. In its place, you’ll acquire hot and cold areas on your skin. Furthermore, inadequate ventilation may cause humidity levels to rise in particular areas of your tent, which is not ideal.

In most cases, this occurs near the tent’s outside walls, and it may even result in condensation on the walls. That’s a nightmare waiting to happen since dangerous fungus, bugs, and bacteria all thrive in high humidity.


Considering airflow and light while constructing a grow tent should not be underestimated. Having adequate airflow can help avoid infections, strengthen plant stalks, and perform a variety of other functions. Unless your tent is properly ventilated, you will not be able to maintain an even temperature across the whole garden space. Your skin will instead get irritated with hot and cold areas. As a result of the lack of enough ventilation, the humidity level in some areas of your tent may rise.

The combination of dampness with hazardous fungus, bugs, and bacteria is a disaster waiting to happen!


No matter where you’re growing, you must keep the temperature at a consistent level. This is especially true in the case of a DIY grow tent. Tents have a tendency to hold in heat, which is created by your grow lamps as well as other sources of heat. Weed plants thrive in a warm atmosphere, preferring temperatures between 68 and 82 degrees Fahrenheit (20 and 28 degrees Celsius). A tent, on the other hand, may soon get overheated. As a result, you may want to think about investing in an air conditioner for your camping space.


Humidity, like temperature, is a key environmental component for any growing operation. The ability to control humidity is one of the most effective methods of preventing possible problems from appearing in your DIY grow tent. Earlier in this essay, we discussed humidity in the context of airflow explanation. Humidity is the most important characteristic in a cannabis garden since it is the most conducive to pathogen infection. Keeping the relative humidity in your tent between 40 and 60% percent, while utilizing ventilation to assist regulate humidity, will help you avoid illness.

Cup Winning Cannabis Strains

We’ve put up a step-by-step instructions on how to construct a grow tent. First, we’ll go through the supplies, tools, and other needs that will be required. After that, we’ll go right into the process of how to build a tent, which will include adding ventilation and the finest available lighting options.

Required Materials And Tools

As far as the structure of your handmade grow tent is concerned, PVC pipe is the ideal material to employ. While most contractors reserve PVC for plumbing purposes, it is also an excellent material for building structures. It’s also reasonably priced, and despite its low weight, it’s very durable. PVC pipes with a diameter of 19 millimeters are often the finest choice for tent construction. Building your construction will necessitate the use of a number of different PVC fittings. They are as follows:

  • A total of eight 90-degree joints — the sort that has three inputs
  • A total of 4 x T-bar joints, 16 x straight PVC pipe, and 1 cross fitting

Panda paper, also known as “Panda film” in some circles, is the ideal DIY grow tent material since it is lightweight and durable. Their white one side and black the other is designed to block out incoming light while reflecting the spectrum into your tent, allowing you to sleep comfortably. Make certain that the white side of your tent is used for the interior and the black side is used for the exterior of your tent. Making an entrance in one of your walls using Velcro or an adhesive zipper is a simple and cost-effective solution.

Instead of using wall-mounted fans, fans that come with a stand should be used with a Panda Paper grow tent since they will not be able to attach to the wall of the tent.

Rotating fans aid in the promotion of airflow. Additionally, invest in a carbon filter to aid in the exhaustion of fresh air from your yard. Along with the PVC, you’ll need a hand saw to cut the lengths of pipe and duct tape to seal any light leaks.

Step 1: Build The PVC Frame Of Your DIY Grow Tent

The very first thing you’ll need to do is put together the framework for your homemade grow tent structure. First, cut the lengths of pipe to fit the dimensions of the space you’ll be working with. You’ll need four lengths to construct your base, four lengths to construct the vertical struts, and eight lengths to construct the ceiling. After you’ve cut your PVC to the appropriate size, you can begin assembling the frame. Make use of the cross-fitting device that is mounted on the roof. The purpose of this step is to ensure that your tent is sturdy; you don’t want it to collapse in the middle of your grow cycle!

Step 2: Cover The Frame

Next, wrap the frame of your DIY grow tent in Panda Paper to protect it from the elements. Cut sheets to fit inside each side of your tent, one at a time, as needed. Duct tape should be used to secure them to the frame. If you accidently break a sheet of Panda Paper, don’t worry; you may use duct tape to seal any light leakage that may have occurred as a result. After then, decide which side of the tent will serve as your entryway. Make a straight line along the middle and attach Velcro or a zipper to the end of the line.

Step 3: Install Ventilation

One of the most difficult aspects of constructing your own cannabis growing tent is determining where to start. To begin, position your spinning fan in one of the tent’s corners. Set it to oscillate to get the most airflow possible. To complete the installation, position the carbon filter on the floor diagonally across from the fan. Then connect the ducting to the carbon filter. Make a hole in the Panda Paper for the ducting and lead it out of the tent using the ducting as your guide. Duct tape should be used to seal any gaps to avoid light leakage.

Fireplaces are excellent because they allow you to vent your weed-scented air over your house, where no one will be able to detect it.

Step 4: Install LED Lights

LED lights are the most energy efficient option for an indoor DIY grow tent since they emit less heat. The crossbeams that run over the top of your tent are the perfect place to hang your LED lights from. The crossbeams will help to disperse the weight of your tent and prevent it from collapsing completely.

DIY Grow Tents Are Terrific

You’re ready to start constructing now that you’ve learned how to set up a grow tent. You will be able to construct a grow tent that will survive for several harvests if you follow the instructions in this tutorial. Building a tent instead of purchasing a pre-made one will save you a large amount of money, and you may customize it to meet your personal needs. Herbies Head Shop categorically rejects any involvement with the use, manufacturing, or distribution of illicit drugs. For additional information, please see our Legal Disclaimer.

DIY Grow Tents – LED, Indoor Grow Tents – How-To Guide

Recently, I published a Beginner’s Guide to Growing Your Own Weed, which you can find here. In it, I explored some of the possible advantages of indoor growing, with one of the most significant being the ability to manage the environment in which your plants develop in accordance with scientific principles. When growing inside, you have the ability to simply monitor and timing light, modify fertilizers and oxygen, and manage the temperature. It should come as no surprise, then, that one of the advantages of employing an indoor grow tent arrangement is that it is also more ecologically friendly than other methods.

It is possible to have them created in a number of forms and sizes, based on your unique requirements.

Sativa plants, on the other hand, tend to be considerably taller, with a robust, thin, loosely branching stem and a dense canopy of leaves.

When constructing an indoor grow tent arrangement, it is critical to consider the kind of plants that you will be cultivating and how they will develop in the environment.

Equipment you need

Any DIY grow tent will necessitate the use of the following four items:

  1. Growing Light: LED grow lighttent setups, in my view, offer the greatest light possible for your plants. They are extremely energy efficient and do not emit a great deal of heat. PVC Piping: The frame is the first step in constructing an indoor grow room setup. PVC has proven to be the most cost-effective material for building DIY grow boxes in my experience. The majority of the expense of LED grow tents is borne by the purchase of the lights and the use of power during the life cycle of your plants. It is important to have enough ventilation since plants breathe carbon dioxide, therefore having more Co2 available will help your plants grow. While pre-designed indoor grow tent setups will have a grow tent ventilation diagram, any competent DIY grow tent curator would want to customize the schematic to meet their own growing requirements. To remove the oxygen-rich by-product of photosynthesis from the grow tent, you will often want to use a 4 or 6 inch fan, so make sure to plan ahead of time. Mylar, sometimes known as “Panda Material,” is a highly reflective film that is essential for any indoor grow tent setup or DIY grow tent. Internally, LED grow tent lights will reflect off the Mylar at whichever wavelengths of the visible light spectrum you chose for your plants to thrive in. The Mylar is opaque on the outside and blocks out light. Light leakage avoidance should be emphasized in every grow tent ventilation design, particularly at the connecting points.

The DIY Grow Tent

Providing you keep light from escaping and ventilate your DIY grow tent appropriately, any LED grow tent you construct should be able to promote plant development while also assisting in the maintenance of the plant environment. The frame is an excellent place to begin. The first step is to identify your target audience. PVC pipe will be used to construct the framework. Because it is only the frame, I normally choose for pipe that is 2 inches in diameter to save on costs. As a result of the fact that your in-line fan will be anywhere between 4-6 inches in diameter, all of the other components of the grow tent ventilation diagram will either have to fit over the fan or fit flawlessly (don’t be scared to use duct tape to get things to fit better).

  1. If you’re interested in learning more about how to create a PVC frame for your indoor grow tent setup, check out this DIY grow tent tutorial.
  2. A single, complete opening should be provided by a DIY grow tent.
  3. When you apply the Mylar, make sure to securely wrap it over and around each side of the cylinder.
  4. It’s preferable to break this up into sections: Tape the first two walls together.
  5. Tape the top and bottom of the box together.
  6. Step Three: At this point, the grow tent ventilation diagram becomes extremely important.
  7. I direct the reader to this page for further information on the equipment you’ll need to get your LED grow tent up and running.

You should make sure that the Mylar is properly sized for your grow and that you have ventilation tubes in place (especially with larger operations).

See also:  How Many Watts Led For 2X4 Grow Tent

As I have stated, LED grow tents are the way to go in this situation.

The light needs of plants alter depending on the stage of development they are in, just as they do with the soil you pick to grow in.

For an example of how it should appear once you’ve completed all four processes, have a look at this little video.

Joey Wells contributed to this article.

If you have any questions about your health or a medical problem, you should always seek the advice of your doctor or another certified health practitioner.

If you think you have a health condition or disease, do not self-diagnose or treat it based on the information provided here.

For errors or misstatements concerning items, Leafbuyer.com disclaims all responsibility and liability.

Save money,subscribe.

Subscribe to receive exclusive local cannabis deals sent directly to your phone and email inbox.

PVC pipe + black plastic/mylar – feasible?

  • Date of joining:June 29, 2011 Messages:15 Likes Received:17 Hello, I am now in the process of conducting my first experimental grow with CFLs. Currently, my 10 bag seed sprouts are housed in an unused and uninstalled bath/shower stall fixture that was never utilized in an unfinished would-be master bedroom and is currently being used as a workshop. As a result of my worries about lightproofing and my want to have some control over ventilation (I cannot utilize more than 10-15 percent of this area), I was considering going to Home Depot and purchasing a couple lengths of PVC with fittings. I’d want to build a frame out of PVC pipe that’s around 4x5x5 to 6x6x6 (length and width are very realistic, height will need to be about 5-6feet max, I’m attempting to grow using LST, however I’m contemplating scrog) in dimensions. I’d next wrap this frame with a layer or two of black plastic sheeting, utilizing velcro for access flaps and other features, as well as cutting holes for ventilation fans and passive air intake, then coat the insides with either white plastic or mylar to protect it from the elements. The questions I have are as follows:1) Is this a feasible option? 2) Does the combination of plastic layers and mylar provide any form of heat or fire hazard? 3) Will 1″ diameter pipe in the tent proportions I’m proposing be able to support the weight of modest fans and compact fluorescent light fixtures? 4) Have I overlooked a better, simpler, or less expensive solution? Normally, I would use plywood, but because to the specific characteristics of the space, I am only able to accommodate items that fit through your standard-sized window frame. 5) Are there any similar-priced materials that might be used in place of the black plastic to make a better substitute? Thank you for any assistance

roots3003Registered User

  • Date of joining: May 20, 2011 Messages:47 Likes Received:10 I’d attempt to make something out of wood or something. I wanted to undertake the PVC work myself, so I built a large box out of it. To be honest, it was solid enough with plastic and a couple of little cfls, but if you want to hang fans or nicer lights, I’d recommend something different. Alternatively, you might use 1.5″ if necessary.

Old School

  • Date of joining:Mar 6, 2006 Messages:14,209Likes Received:5,712 You won’t be able to create an airtight grow room in this manner, which will result in odor leakage (let alone light leaks). Make a grow box or invest in a grow tent.

pyrophobeRegistered User

  • Date of joining:June 29, 2011 Messages:15 Likes Received:17 Premade tents are out of my price range for the time being, and as previously said, I am unable to put sheets of plywood into the space in issue, which would have been my preferred option. In the event that I use double or triple-thick plastic sheets, will this not give adequate air/light tightness, assuming that I seal everything with tape? Alternatively, does anyone know what sort of cloth or material grow tents are often made of? (at least the black area on the outside)

rpgamer12Registered User

  • Date of joining:June 28, 2011 Messages:34 Likes Received:11 I work in asbestos abatement for a living, and one of the tasks I have is to put up containment. Basically, we seal off rooms with rolls of plastic that resemble orange tarps to keep the air out. It will be airtight with only that and a little duct tape if you buy thick enough material (8 mil or more). However, if you are concerned that it will become hot enough to catch fire, you can purchase white fire-resistant rolls to protect yourself from this possibility. It isn’t awful to construct a frame out of plastic, provided that the plastic is kept tight and wrinkle-free, and that every seam is double-widely duct taped. Make sure there are no creases in the duct tape, as there should not be any in the plastic.

pyrophobeRegistered User

  • Date of joining:June 29, 2011 Messages:15 Likes Received:17 Thank you for sharing this information. Is this type of plastic normally accessible at Home Depot/Lowes or is it best to get it online? Yes, I believe this is a possibility. Try to find an outside material that is not very porous, such as some form of plastic wrap, to use as a barrier. Afterwards, you could just cover your bottom with something more durable, but you wouldn’t necessarily need to do so. Fire should not be a concern as long as you have proper ventilation to maintain temperatures low enough to support the growth of a healthy plant. Although I believe that there are a large number of materials with flash points lower than 100 degrees Fahrenheit

rpgamer12Registered User

  • Date of joining:June 28, 2011 Messages:34 Likes Received:11 It’s available at specialized shops, and its popular moniker is “poly” as in polyethylene sheeting, which is what it’s made of. I had my numbers mixed up previously, and it’s not 8-million that you don’t want to dip below, but 6-million. It is just a measurement of how thick the plastic is. Don’t waste your money on thin translucent plastic that you can simply tear through. If you want to take the home depot route, you can get some decent plastic sheeting that has been used for pond liners at reasonable prices. It’s possible that it will function even better than what I recommended. You’ll probably be able to find it in lesser numbers rather than purchasing a 100′ roll that is 12′ wide.

mrgoodsmokecommunity organizer

  • Date of joining:June 21, 2009 Messages:8,398 Likes Received:7,726 I understand that pre-made tents are out of your price range, but I purchased mine on eBay for $80. If you consider that a roll of mylar will cost you at least $20, plus a few dollars for the pvc and black plastic, as well as the time it will take you to put it together, you might want to think twice about just buying a tent. I’m not talking about the expensive ones that cost $300 or more, but rather something like this. Grow Tent | eBay NEW HYDROPONICS GROW TENT 4x4x6.5 FT GROW BOX CABINET Alternatively, this. Reflective Mylar Hydroponics Grow Tent Room (48″x24″x60″) | eBay Various people will advise you that you should spend more money and acquire a different tent, among other things. They are completely devoid of any substance. The zippers aren’t as good, or the stitching isn’t as nice, or they may even go so far as to tell you that your plants will die if you use a low-cost tent to grow your plants. They are liars who are seeking to rationalize an excessive amount of money spent. I’m about to start my fourth harvest with a cheap ass ebay tent and the cheapest light I could find on ebay, and I’ve had absolutely no difficulties. Whatever you decide to do OP, keep in mind that you’ll be using it again and over again, and if you’re creating things because you want to save money, at the very least figure in the time it will take you to make it and how much it is worth. Whatever happens, I’m confident that your plants will thrive. best of luck to you, sir

pyrophobeRegistered User

  • Date of joining:June 29, 2011 Messages:15 Likes Received:17 Thank you, mrgoodsmoke, for your response. I had no idea that a decent-sized tent could be purchased for that much money. I’m going to check into these right away. I estimated the cost of a plastic/pvc structure at around 40-50 dollars for a 6x6x6 space plus time. Although that is based on reasonable pricing, it is possible that the price will rise as high as 70$. If all goes well with the CFLs and DIY, I want to invest in high-pressure sodium lights and a ‘real’ grow tent in the near future. On the subject of availability of time, it’s one of the primary reasons I’m attempting this is to fill up some of my spare time. I understand that not everyone is the same

mrgoodsmokecommunity organizer

  • Date of joining:June 21, 2009 Messages:8,398 Likes Received:7,726 Even if it’s going to cost you close to $200 in order to run the number of CFLs you want, you can probably get up a 400w mh.hps cooltube on Ebay for around that price as well

pyrophobeRegistered User

  • Date of joining:June 29, 2011 Messages:15 Likes Received:17 After discovering that I could have Lowes or HD cut plywood into boards that would go through a window, I estimated that a 4x4x5 box would cost around 50 dollars in wood and 20-50 dollars in paint, mylar, and sealant to construct. In a twist of irony, I was working on surface area and dimension calculations for a growbox/tent in an old calculus notebook, knowing I’d need it one day. Using a preliminary estimate, both come out to around 70-100 dollars. Considering that plywood is theoretically much more difficult to put together because of framing measurements, and that pvc is simply cutting and sticking into fittings, then covering in plastic and taping up, and that plywood is much more durable when compared to plastic sheeting, and that pvc can be disassembled for the cost of replacing plastic sheeting and is lighter to move if necessary, I don’t shop till Friday, so there’s still time to think about it. Perhaps I should reduce the size of the grow to 3x3x5 or something like, given that this is my first attempt.

rooster1369Inner-dimensional VisitorGold Member

  • Date of joining: December 31, 2008 Messages:6,144 Likes Received:5,424 Growing marijuana is more addictive than smoking cigarettes. I chose with a tarp wrapped over a PVC frame as my construction method. It will work if done correctly, and it will be light and odor proof as well. However, it is just temporary and will begin to come apart after a few growing seasons. Purchase a genuine tent or construct a wooden cab as a treat to yourself. You will thank yourself when you only have to pay for a grow area once rather than twice or more times, as well as for upkeep on the DIY “tent.” After two growing seasons, I decided to toss the homemade tent since 1) it looked out of place and 2) it began to break apart after being opened and closed several times. I currently have a cab that has been converted into a storage cabinet. I still need to make a screen and a rumple bucket, but they are simple tasks. Please accept my apologies for the repeated photos. The computer is a complete moron

rooster1369Inner-dimensional VisitorGold Member

  • Date of joining: December 31, 2008 Messages:6,144 Likes Received:5,424 2x2s should be plenty, in my opinion, if you use a plywood box for stability. Make the measurements as simple as possible for yourself. The four front and rear parts, as well as the four verticles, are all the same length. Then there are the four side pieces, which are all the same length. Angle brackets are used to keep the frame together (on the interior of the frame), and then the plywood skin is added. Make the door have a complete front, since this makes it easy to weatherstrip and seal it properly. If possible, drill your vent holes close to the corners of the room to avoid the wood from shaking when the fans are running. If you only have a few tools, you can make every cut except for the vent holes at home depot with no problem. DIY growboxes should be posted in the DIY area of the forum.

pyrophobeRegistered User

  1. Date of joining:June 29, 2011 Messages:15Likes Received:17 The dialogue that me and my carpenter friend had at work today was essentially written out by you. I’ve figured out the design and measurements for my frame. In response to all of the comments I’ve received in this thread, I’ll create a DIY tutorial with photos to share with you. Date of joining: May 18, 2011 Messages:742Likes Received:329 About 3x3x5Mine could carry a significant amount of weight from the ceiling since I installed an excellent central support post. The structure of the roof is sturdy. I intend to scrogg 2-4 plants, but first and foremost, I must finish this grow. It wasn’t difficult to construct, but it wasn’t simple either. Of course, it takes a long time and is never completely finished. Regardless of the time of day, something always has to be done. mild movement, increased ventilation, and so forth

How to Make Your Own DIY Grow Tent & Box

While the United States’ path toward cannabis legalization has brought forth a slew of positive outcomes, we believe that the spread of homegrown marijuana is among the most significant. As more states pass legalizing legislation that allow for personal marijuana cultivation, geography, weather, and residential constraints are forcing many prospective home producers out of their gardens and into their garages, basements, and closets instead. Just because your flat does not have the same amount of land as a farm in theEmerald Triangle does not rule out the possibility of growing your own marijuana.

See also:  How To Make A Cat Tent Out Of At Shirt

Why build a grow tent?

To grow marijuana inside, you’ll need a source of natural illumination. All things considered, the entire concept of indoor growing has been developed to imitate and improve on the benefits of natural sunshine. And while outside plants are well-known for their tendency to grow like weeds, the primary advantage of growing plants indoors is the ability to regulate every aspect of the plant’s habitat. Growing plants inside is all about establishing a micro-environment for your plants to thrive in.

In this case, the use of a grow tent is necessary.

Growing plants inside is all about establishing a micro-environment for your plants to thrive in.

What material do you need for a DIY grow tent?

The cannabis grow sector is growing as a result of the legalizing green rush. For those who don’t have the time or energy to construct their own grow tents, there are plenty of reasonably priced pre-built grow tents on the market to choose from. If you’re determined to build your own grow tent, the first step in organizing your materials is determining the frame and size you’ll need. Growing tents have traditionally been constructed of PVC tubing or wood for their structural frameworks. Using a ready-made wire rack for your grow tent frame, on the other hand, is by far the simplest alternative for those who are new to carpentry.

  • A conventional 36″ x 12″ x 54″ shelving unit is ideal for storing 1-2 plants, however a larger 36″ x 24″ x 54″ rack has the capacity to hold three or four tiny pots in a single row.
  • LED grow lights have seen significant technical advancements in recent years, making it more affordable than ever before to purchase a high-powered, full-spectrum light of great quality.
  • The “tent” portion of your grow tent is the next piece of equipment you’ll need in order to keep the light concentrated and reflected as much as possible onto your plants.
  • Reflective space blankets and layers of black garbage bags may be used to create a low-cost rack cover by layering them together and sewing them together.
  • As well as one or two tiny fans (clip-ons work well), a ventilation fan, a short piece of ventilation ducting, several zip-tie knots, several rolls of duct tape, a couple of magnetic or Velcro strips, and an automated timer for your lights, you’ll need a few more supplies.

Here’s a checklist of everything you’ll need to make your own grow tent, just in case you forgot what you needed:

  • Prepared wire rack (36″ x 12″ x 54″ for 1-2 plants or 36″ x 24″ x 54″ for 3-4 tiny plants)
  • Ready-to-use potting soil
  • Ready-to-use potting soil In addition to LED lights, you’ll need black and white panda film or one-sided mylar wrap, as well as one or two tiny fans, a ventilation fan, ventilation ducting, zip ties, duct tape, magnetic strips, and an automated timer for each grow light.

Simple steps to make a DIY grow tent

Assembly of your grow tent’s structure, or in this example, its wire shelving rack, is the first stage in the process of building your grow tent. Once you’ve installed a top shelf from which to hang your lights and a bottom shelf to support your plant(s), rope your lights below the topmost shelf using zip ties or a wire hanging kit to keep them from falling off. Your cables and timer should be secured to the rack’s frame with zip ties and duct tape. Create a circulation system with your fans to circulate the air and direct any heat created by the lights to the top of your shelf.

  1. Make certain that there are no light leaks and that the wrap you choose forms a floor and a roof to completely enclose the structure, since the tent is designed to keep all of your light inside, reflecting, and focused on your plant.
  2. The interior of the tent will require access in order to hydrate and feed your plant(s), alter the light height, and, eventually, harvest your buds, so ensuring sure your entrance is both accessible and light-sealed is critical.
  3. Make a hole in the top quarter or roof of your tent and connect your ducting to the exhaust fan.
  4. If you’re really concerned about the odor of your indoor grow, consider installing a carbon filter in the center of your exhaust system.
  5. After you’ve put all of your equipment together, choose your favorite seeds or clones and sit back and watch your new garden take shape.

DIY Grow Tent – Cutting all cost corners.

Greetings, gentlemen. I started putting together my grow tent today and realized I should probably post it on the internet as a journal. I’m jobless, and if I manage to come across $20, I have to make the most of it, therefore I though this would be of great use to those who are in the same situation. I’ve come up with a number of methods for cutting costs while yet maintaining a high-quality growing environment. So yet, no photos have been taken, but I want to purchase a camera tomorrow and start shooting.

  • In all honesty, this is perhaps the item that will have the most financial impact (not including the lights and the fans).
  • If your frame is 2m tall and has a 1x1m footprint, you’ll need to figure out how much framing you’ll need to put it together.
  • I like to use PVC pipe with a smaller diameter but a greater wall thickness since it is more durable.
  • It is entirely up to you how you construct the frame, but you must ensure that it is sturdy.
  • I went down and bought 1m lengths of 15mm pipe for $2 apiece (AUD), but you can get it for less money if you buy in bulk (I only had $10 in coins in my wallet, so I could only buy so much hehe).
  • Simply cut your pipe to the appropriate length and purchase some elbow joints.
  • Simply press all of the parts into position, and the finished product should look something like this.
  • More to come as soon as I finish it!

EDIT: I failed to clarify that if you have any little offcuts of pipe that would seem to be thrown away, don’t throw them away. Your frame will benefit from their addition of additional support, regardless of its size! (Unless it’s something ridiculously short like 2 inches in length)

Quick Answer: How Do You Build An Indoor Grow Tent With A Pvc Pipe Frame

You only need to follow these easy procedures to wrap your tent: Make use of the 3.5m X 2.5m sheet of film to cover three of the four walls of your picture frame with it (the 4th will serve as the door of your tent). Then, using the 1.5mX1m fabric, cover the ceiling of your tent. It’s time to start working on the tent’s entrance door.

What material is used in grow tents?

In general, a grow tent is constructed by connecting a heavy-duty canvas outer layer, which is often nylon or polyester, to a reflective inner layer, which is typically composed of Mylar or other reflective material. Because of its great reflectivity, the exterior fabric is sturdy and long-lasting, while the inside fabric promotes light efficiency by reflecting light back into the room.

How do you make a green screen?

When the screen is nearly completely filled, switch to a 12/12 light cycle to encourage flowering to occur. Continue to tuck and weave each branch over the course of the following 2–3 weeks, as your plants begin to sag. This boost in growth will allow you to completely fill out the screen before your plants reach the real blooming stage, which will cause their development to cease significantly.

How do you make a grow box?

From beginning to end, here’s how to build a grow box. Step 1: Create a basic frame. Step 2: Putting the Grow Box back together. Ventilation in the Light Chamber is the third step. Step 4: Turn on the light inside the Light Chamber. Step 5: Installation of an air filter and ventilation system for the grow chamber. Step 6: Turn on the lights in the grow chamber. Step 7: Putting Everything Together.

Are grow tents worth it?

Is Investing in Grow Tents a Good Investment? Despite the fact that a grow tent might be a considerable initial expenditure, it can really save you money in the long term. This is due to the fact that using a grow tent will save you money on the expenditures of providing water, fertilizers, and light to your plants.

What is the best color to paint a grow room?

In any grow room, white wall covering is always the preferable option since it reflects light better than metallic colored or silver wall covering. When painted flat white, it has the capacity to reflect between 75 and 85 percent of the light coming from your indoor lighting source.

How do you make a vegetable grow box?

How to Construct a Grow Box You’ll need the following supplies: Place the eight nursery pots into the container with the open ends facing out. Then you’ll get to work on the lid. Now, for drainage purposes, drill 14-inch holes about 2 inches apart all over the lid. Drill a hole in the top of the container on each long side, just above the lid. You’re ready to start working with the dirt.

Can you use aluminum foil instead of Mylar?

Aluminum foil may be utilized in a variety of applications where Mylar would be inconvenient or impossible. Aluminum foil performs better in areas where heat is required, such as industrial and residential settings. It is also more durable than other materials. Aluminum is also malleable, and it may be formed to fit around things. In comparison to foil, mylar is more flexible and will not rip as quickly.

What is the best indoor grow system?

The Top 5 Indoor Grow Kits for the Year 2020 Editor’s Selection: 4x4ft LED Soil Complete Indoor Grow Tent System with LED Lights and soil.

The 8x4ft LED Hydro Complete Indoor Grow Tent System produces the largest harvests. The most energy-efficient number is 6.56. The 4x5ft Complete Perpetual HID Soil Indoor Grow Tent System is the most customizable of the bunch.

Do mirrors help in a grow room?

Is it possible to use mirrors in a grow room? A grow room with mirrors will reflect light, but they will often do more damage than good. The primary reason that mirrors are detrimental to grow rooms is the type of light that they reflect, as well as the manner in which they reflect it. Infrared light is reflected directly off of mirrors.

How do you smell proof a grow room?

There are several things you may do, like ensuring appropriate air circulation, installing an activated carbon filter, using ozone generators, installing surface and air purifiers, employing odor absorption gels, and maintaining a consistent room temperature.

How do you light proof a grow tent?

Wrap a 6′′ length of ducting around the bottom of the tent to keep it from leaking. Use a Bug filter on the exterior of the tent duct opening to keep bugs out of the tent. Only use an exhaust fan at the top of the tent to pull hot air out, and place the cold passive air intake at the bottom to draw in cool air from below.

Do Grow Tents really work?

They are light enough that moving them around is not a problem, even if you have plants within the container. Grow tents are built to be energy efficient, and they provide you with everything you need to get the most out of your growing investment. When growing indoors, walls reflect and filter light, exposing plants to a higher concentration of light than they would be exposed to outside.

What is the best material for a grow tent?

Mylar is the most widely used and best reflective material for use on indoor crops because of its high reflectivity. It is not only incredibly economical, but it is also extremely efficient, allowing for equal lighting distribution across your grow space. The above 2-mil standard hydroponics Mylar film reflects around 98 percent of the light that reaches the crops in hydroponics.

Can I put a grow light in my bedroom?

Bedrooms may benefit from 600w HPS/MH grow lights and 630w CMH grow lights, which can produce excellent results for three to four plants each. Large rooms and basements can benefit greatly from the use of 1000w HPS/MH grow lights, as well as double ended 600w and 1000w HPS/MH grow lights, which can produce tremendous yields.

Do I need a grow tent to grow indoors?

If you want to use a hydroponics system to grow fresh food all year long, it’s time to think about investing in an indoor grow tent. Grow tents are essential for any gardener who wants to preserve and develop their plants.

How do I build a grow room in my bedroom?

If you’re just getting started, stick to the fundamentals and keep things simple. Locate an appropriate setup location (spare room, garage, etc) Make your environment as light-tight as possible. Make a decision on how you want to arrange your area (e.g. tent, entire room or cupboard within a room) Make sure you have adequate light coverage in your setup. Configure an appropriate air exchange system.

When should I flower my green screen?

Installation of the screen is most effective during the vegetative stage of the marijuana plant’s growth, when the plants have developed into dense bushes of fan leaves. Ascertain that the screen is securely affixed to a wall or post before carefully lowering the screen onto the canopy’s top.

Leave a Comment

Your email address will not be published. Required fields are marked *