What Does It Mean To Take Out The Tension In Tent Poles

Quick Answer: What Does It Mean To Take Out The Tension In Tent Poles

Draw the thread through a basic binding knot about 2 inches from the end and tighten it. Your peg should now be in the middle of the knot and the long end of the rope, as seen below.

How do you remove tent pole end caps?

Mine are just minimally screwed on with the stress created by the cable within the earbuds. They simply twist themselves off. There should be a little tooth that just barely fits into a groove to complete the look. It is necessary to use a large adjustable wrench, which I move around the pole and then use to pound the end off.

Does Big Agnes repair tents?

Big Agnes will cover the cost of repairs and shipping back to you if we establish that your items are covered by warranty. Please contact us for more information. For warranty evaluations and repair requests, the client is responsible for delivering the item to our repair facility for assessment.

How do you repair a mesh on a tent?

As used in broadcast and motion picture programming and films, the term “tent-pole” refers to a program or film that is important to the financial success of a film studio or a television network. It is intended to be an analogue for the way a strong center pole offers a secure framework to a tent construction.

How do you fix a broken swag pole?

Here’s how to repair a part of pole and shock cable that has become damaged: Remove the knot at the end of the shock cord by cutting it. Untwist the shock cable from its spool. Remove the broken portion and get your new one ready to go. Trim the ends of the pole using a file. It’s time to swap out the shock cord. Removing the tape and double-checking the tension is all that is required!

What is a ferrule on a tent?

When two composite rods or tubes are joined together, ferrules are utilized to link them together. They also make it possible to employ shorter carbon or fiberglass rods or tubes, as well as to construct and dismantle your finished product, resulting in a smaller container for transportation purposes.

How long should a tent last?

The lifespan of a tent should be at least 5 years of continuous usage if it is properly maintained. A tent’s lifespan can be significantly extended or significantly reduced based on a variety of conditions.

Can I cut a fiberglass tent pole?

What is the best method for cutting fiberglass tent poles? Without a doubt, a basic hacksaw. If you don’t already have one, you’ll soon realize that you’ll need one. Masking tape a few loops around the area you wish to cut, then do it outside. It will take around three minutes total.

How do you cut fiberglass poles?

The blue painters tape should be applied at the site of the cuts, if that is what you want. When you’re cutting, wear a mask. The rods should be cut to length with a portable bandsaw or hacksaw (you’ll require a fine cutting blade for this). By applying the tape, you may reduce the likelihood of the rods splintering.

How do you cut fiberglass without splinters?

Place masking tape along the cut line of a panel, mark the line on the tape using a pencil, then saw through the tape to reduce chipping and splintering. Inside corners cut in a panel should be rounded to prevent a fracture in the completed item as a result of a sharp corner.

What are flexible tent poles made from?

Tent Poles Made of Glass Fiber Because of the inexpensive cost of glass fiber, it is a common choice for less budget tents due to its durability.

Because of its flexibility, a tent bends with the wind rather than standing hard against it, allowing it to shed gusts. When you are experiencing something for the first time, it might be a little unnerving.

How do you remove a ferrule from a tent pole?

Place the pole in a vice and heat the ferrule’s tip with a heat gun, grabbing the ferrule with pliers as it heats up, and turning it to check if it starts to move. It is important not to overheat the pole, since this will cause it to burn.

Do tent poles need the elastic?

To create tension, the elastic must be less than the total length of all the poles once they have been strung. However, it is always a good idea to have a spare elastic band and a spare pole or two on hand in case you need to do a repair on the spot if possible.

What is an emergency field repair splint?

The MSR Pole Repair Splint is a simple and effective solution for repairing a broken tent pole. Pick the one that best fits your tent poles from the two sizes available (13mm and 16mm), and have it in your pack in case of an unexpected emergency.

What is the best tent repair tape?

1. Gear Aid Tape Fabric (More information). 2. Gear Aid Seam Grip Kit (explained in further detail). 3. MSR Pole Splint (More information). 4. Outfitters Supply Repair Kit (Continued) Continued 5. Coghlan’s Repair Kit (Continue reading) 6. Triwonder Repair Splints (More Information) (7) Stansport Tent Pole Repair Kit (More Information) 8. Tear-Aid Fabric Repair Kit (with instructions) See more.

Can you fix a tent pole?

A pole repair sleeve is the quickest and most convenient method of repairing a damaged pole. This little tube, which is also known as a splint, is frequently included with your tent. If you don’t already have one, go out and get one. Pole repair sleeves should be somewhat bigger in diameter than the pole they are intended to fix so that they do not move about too much.

How do you clean cut fiberglass?

The Most Effective Techniques for Cutting Fiberglass Panels Router. If you decide to use a router to cut your panels, make sure to choose a blade with a fine edge so that the edges are clean and smooth when you are finished. Fiberglass Trimmer with a lot of power. A trimmer is a lightweight and strong tool that can readily cut through durable fiberglass, such as that used in paneling, without damaging it. Jigsaw. A circular saw is a saw that goes around in a circle. Hacksaw.

Does REI repair tents?

If you have any doubts about your abilities to repair a tent pole, REI shops can do basic repairs.

Can you shorten tent poles?

Simply cut the cord; cutting the cord one inch shorter is OK. Making a new knot with only the small-diameter part of the pole allows you to attach the last segment of pole to it. (Optional)

How do you measure the diameter of a tent pole?

A vernier calliper can be used to determine the diameter required, or a tape measure can be used if one does not have access to one. Take a part of your pole and place it end down on a tape measure or a ruler on a table. Then take another section of your pole and repeat the process with the tape measure. Now have a look at the diameter.

How to Replace Shock Cord in Tent Pole

A vernier calliper can be used to determine the diameter required, or a tape measure can be used if one does not exist. Take a part of your pole and place it end down on a tape measure or a ruler on a table. Then take another section of your pole and repeat the same with the other section. Look at the circumference now.

What is a tent shock cord and why is it important?

Modern tent poles are equipped with shock cords, which serve primarily to keep your tent poles connected to one another. Tents of the past had poles that easily split apart into tiny portions, however the newer design preserves all of your poles in one piece and makes pitching your tent much simpler. You may still utilize the fragments of a broken shock cord from one of your poles if the cord is from another pole. Nonetheless, because your tent poles are intended to be linked, pitching your tent may prove to be a significant issue.

Upon assembly of the poles, the shock cords are formed of an elastic material, which allows for the individual segments to be kept together with elastic once the poles have been joined.

Although you may use a non-elastic shock rope to hold your tent poles together in one piece, the elasticity is undoubtedly advantageous when putting together your wilderness shelter.

What you need to replace the shock cord in a tent pole

Make sure you have all of the materials you’ll need before starting to work on your tent repair. A replacement shock cord may be purchased at your local camping store, and there are several companies who sell shock cords online as well. You will require the following materials:

  • The use of a shock cable (size 18″ or smaller) with adequate length to cover all of the poles that need to be fixed
  • Scissors or a sharp edge
  • Measuring tape
  • Sharpie or marker pen
  • A lighter or matches to melt the ends of the wires Tape for masking

How to replace a faulty shock cord in a tent pole

The moment has come to get started on mending your shelter now that you have all of the equipment you need, as well as some new shock cable to replace the old, faulty ones you had to start from scratch. If you follow our instructions, your tent will look and function like new! The first thing you should do if your shock cord is still intact is to cut it with scissors by pulling apart two portions of your tent pole and severing the shock cable within them. You will see that your tent pole will come apart into its many components after the cable has been severed.

  • Because it’s probable that the pole portions in the middle are similar, the end pieces where the rope is knotted are the most critical parts to avoid getting mixed up in the process.
  • Perhaps you’ll need to remove your grommet pegs and then untie the remaining cable before you can continue.
  • 2.
  • Remember to collect the proper dimensions for each tent pole if you’re replacing the shock cord in a number of different models.
  • Make a mark on the cord using a marker pen to indicate the length that will be needed, but do not cut it yet!
  • If you are unable to use your previous cord as a reference, measure and mark the new cord to be approximately 8 inches shorter than the pole, or around 75% of its overall length.
  • You’ll need to cut the cord to a length that’s slightly longer than the length of your tent poles in order to leave enough room to thread it through.

Then, taking the longer end, begin threading it through all of the segments of the tent pole until you reach the other end.

Make certain that the cables are threaded in the proper direction, male to female, or else they will not fit together after you’re through.

Step 4: Finish the job 4.Assemble the tent pole so that all of the sections are attached to one another, just as you would while pitching a tent.

When all of the tent pole sections are securely fastened together, begin tugging on the cord to stretch it out at the other end.

When you’ve reached the desired length with the string, tie a knot here to ensure that the peg is secure.

Then, using your lighter or matches, singe the end of the cord to prevent it from fraying or unraveling.

All of the components should be tucked away and reassembled, and there should be no evidence of a shock cord visible outside the pole.

We’ve come to the end of our lessons on how to replace the shock cable inside a tent pole.

All camping equipment is subject to wear and tear, but for the most part, it is not required to replace it.

The fact that you can use this approach at home when doing repairs is excellent, but what happens if your shock cord breaks while you’re on a camping trip isn’t so nice.

If you don’t happen to have an extra length of tent pole shock cord on hand, continue reading to learn about potential alternatives to this procedure.

How to Repair a Shock Cord if it Breaks in the Field

A snapped or overstretched shock cable might make erecting your shelter more difficult if you’re already out on the trail during your camping vacation. If you want to repair the wire without having to replace the entire length, fortunately, there is a simple solution. However, while this is not a permanent solution, it will allow you to use your tent for a short period of time until you can replace the cord completely. If the cable hasn’t snapped, but rather has become too stretched out to go around your tent pole, there’s a simple solution.

  1. Then, draw the shock cable through the grommet peg until it is taught once again, and reattach it to the grommet peg.
  2. If the shock cord on your old tent pole has snapped, you’ll need to remove the pole using the steps outlined above to fix the problem.
  3. Remove a few inches of the cord’s elastic core on each side of the break, leaving only the braided sheath on the other side.
  4. The reason you need a thinner segment of cord to tie the knot is so that the knot will not become trapped in the poles and will be able to flow through freely.
See also:  What Is Under The Tent In Nfl

Using string as a temporary replacement for a broken shock cord

If the shock cord in your tent pole is damaged beyond repair and you don’t have a new replacement cord on hand, you can use a string to tie the poles together until you can purchase a new replacement cable. Although this will not have the same elastic characteristics as real shock cable, it can be used as a temporary replacement until you can make more serious repairs. Keep this in mind when using this. All you need to execute this DIY patch is a length of strong string and a hair bobby pin, making it a simple repair that can be completed with a small number of supplies.

  • Remember to be careful not to mix up the pole pieces once again, so that you can quickly put them back together thereafter when you’re through.
  • Calculate the length of your string based on the length of your tent pole plus a few additional inches for tying the knots, and then cut it.
  • This will make it much easier to thread the string back through the tent.
  • Dropping the bobby pin down through the pole and then gently pulling it out from the other side is a good way to do this.
  • Because you’re using string rather than an elastic cord, you won’t be able to tighten it before tying it off properly.
  • Tie off your string on the grommet peg, allowing for the additional length, and then singe the ends to avoid fraying.

When you’re finished, we recommend that you unfurl your poles to make sure there’s enough slack to pack away your tent properly. Any mistakes can be corrected by untying the end at a peg and making any required modifications.

How to repair a broken tent pole

The shock cord isn’t the only part of your tent pole that might break; the outer poles themselves can be susceptible to breaking at times. If you experience a tent pole breakdown while on a camping vacation, it might render your shelter entirely inoperable! You should be familiar with these simple methods for repairing a damaged tent pole as well as changing the bungee cord so that you are prepared for any situation that may arise. A pole repair sleeve, also known as a splint, is the most straightforward method of repairing a broken pole.

  1. Purchasing a repair sleeve is a cheap option if your tent does not come equipped with one; you never know when you might require one.
  2. If the tent pole has simply been twisted, and not completely cut, gently bend the metal back into place to prevent further damage.
  3. If there are any shards of broken tent pole metal in your path, try bending them back inwards with some pliers or, if necessary, a rock to clear the route.
  4. Alternatively, if you do not have a tent pole repair sleeve, you can splint the pole with an extra stake.
  5. Using duct tape, secure a stake to either side of the broken tent pole and then line up the broken tent pole the same way you did previously.

Preventing damage to your tent poles in the future

If you’ve had to make a repair to your tent pole shock cord and want to prevent having to do it again in the future, we have some suggestions for maintaining and extending the life of your tent poles to help you out. Keep your poles off the ground at all times, especially if you’re working in a sloppy environment with loose soil, gravel, or mud. Openings into the hollow inside of the poles may be seen when your poles are folded up. It’s ideal to prevent having any debris get trapped inside your tent poles because this might cause the shock cord to become abrasive and eventually break.

When building your tent and connecting the tent poles, start with the central segment and work your way out from there.

This will lower the amount of strain placed on the elastic shock cable within, hence reducing the likelihood of breakages and the need for replacement.

You’ll be considerably more likely to prevent repairs and replacements in the future if you follow these few simple suggestions. If you’re willing to put in the effort to make a few minor repairs, then resting on your camping vacation will be much more enjoyable.

Final Verdict:

It is occasionally required to replace the shock cord in your tent pole, but it does not have to be a difficult process. It is possible to save a large amount of money by making minor repairs and replacements to your camping equipment over time, and it is also considerably healthier for the environment. Learning how to execute these little repairs is simple, and more importantly, it will make you a more experienced camper. As an added bonus, watch this video for some further tent pole repair advice!

How to Replace a Tent Pole Shock Cord

The elastic shock cord on your tent poles has deteriorated and has become brittle, making it no longer flexible. Given that new poles can cost up to $100 or more, why not simply replace the cord, which costs less than ten percent of the price of new poles? It’s been years since I’ve used my North Face Rock 22 two-person tent (which has two identical poles), and the elastic cord within the poles has become brittle and no longer retains its flexibility. I had purchased the tent brand new for around $200, and replacement poles were going to cost an additional $150!

I just needed 30 minutes and a pint of beer to get my tent poles back to their original condition!

You’ll need at least the whole length of all of your poles combined to complete the task.

a pair of scissors or a knife Sharpie or Marker for Measuring Tape Matches or a lighter are recommended.

Step 1: Cut the Cord and Remove the Grommet Pegs

Take a deep breath in and out. Pulling two parts of the pole apart and cutting the rope will do this. This will cause the pole to divide into its distinct parts (Mine has 8 sections per pole, and only the two end sections are different, so I made sure to keep those separate). Remove the peg from the pole end and you should be able to see the standing end of the cord, which has been knotted and linked to the peg. Because my pegs were threaded, I had to detach them from the pole sections in order to use them.

Step 2: Measure Your Pole(s)

Following that, you’ll want to take measurements of your poles so that you can determine how long your rope should be. Because my tent has two poles that are exactly the same length, I only had to measure once. If you have many poles of varying lengths, you will need to repeat this step for each pole in your set. Measure the length of your pole from end to end; this will be the length of your rope when it is fully stretched. My experiments with the elasticity of the cable led me to the conclusion that for every foot of relaxed cord, I would receive 1′-4 of length “because of a stretched chord To get the final length (the length of the pole, hence the ultimate stretched length), we must multiply it by 75% of the original length.

Take the length of your pole in inches and multiply it by 0.75.

My poles are 152 inches in length, hence my measurement is as follows:152 inches * 0.75 inches = 114 inches” This is the spot where I put my relaxed chord marker.

Please keep in mind that you should not cut the cord just yet! It is quite difficult to feed a 114″ cable into a 152″ pole because of the length difference. Inquire as to how I know this.

Step 3: Thread Your Peg and Knot the Cord

Feed the standing end of the cable (the end that is marked with a ‘zero’ on the tape measure) through the hole in the grommet peg and secure it with a rubber band. Draw the thread through a basic binding knot about 2 inches from the end and tighten it. Your peg should now be in the middle of the knot and the long end of the rope, as seen below. In order to avoid tripping, feed the cord through the first part of pole and continue until all portions are attached to the cord. Check to see that the pole portions are aligned appropriately so that they will fit together as intended before continuing (male end toward female end for each joint).

The long end of the cord should be stretched so that it reaches the mark you created earlier while the pole pieces are joined in the manner in which you would build the tent.

In this stage, the pole should be beginning to take form.

Step 4: Cut/Singe the Cord and Insert the Pegs

Remove the cable from the machine, leaving around 2 inches of standing end. Make a singing sound with the lighter or matches at the end of each string (on both ends of the pole). Fold the cord over upon itself and put the standing end of the cord into the pole to complete the loop. Incorporate the knot into the pole. Insert the peg into the pole with the threading needle. Each pole should be treated in the same way.

Be the First to Share

You don’t have to throw away your old tent poles since Matt from Next Adventure teaches us how to restore them to life by replacing a broken or worn shock cable. – Hello everyone, my name is Matt and I’d want to introduce myself. We’re here at the next adventure, and now we’re going to speak about how to fix the shock cord in your tent poles, which you may have damaged. Frequently, people bring in tent poles with the shock cable stretched out, and all that is required is to replace the shock cord where it passes through the middle of the pole.

  • Most high-end tent poles are constructed in such a way that the shock cord may be re-threaded when it becomes frayed.
  • Some of the lower-cost poles, particularly fiberglass poles, are not as durable as they should be.
  • The result is that each and every tent pole will be a little bit different.
  • Aluminum tent poles with an end cap that’s tacked in place or crimped in place using a little pinching mechanism are sometimes available.
  • Sometimes they just won’t come out, and you’ll have to be a bit creative with how you remove them, or you may decide not to remove them at all.
  • This man is quite easy, as you can see by the shock cord, which has been threaded through a small hole in the end cap and tied off with a knot at the other end.
  • It’s going to be nice and simple, and it’ll serve as a fantastic small example to demonstrate the fundamentals.
See also:  What Kind Of Tent Stake In The Core 12 Person Instant Cabin Tent

A tape measure is another a useful tool that can be carried around in a pocket.

If you have a shock cord that is the same length as your tent pole, you should be able to stay dry.

The length of your tent pole will be the first thing you’ll need to know while setting up your tent.

I like to extend the entire thing out and measure it as an one unit, and you’ll need around the same amount of shock cord as the precise measurement of your pole to complete the job.

While it is true that this guy is going to suffer a little, we also want a teeny-tiny amount of strain on him.

A large number of tent poles are divided into portions and have distinct sections and components of the pole.

As a result, we’re going to nu-thread every single one of these people.

My new shock cable has arrived, and I want to use it to shock this individual.

Make a small stopper knot to prevent the item from slipping through the hole.

There are a few various methods in which you can thread it through the hole.

You may feed this wire all the way through; as you can see on this one, we used the pliers to form a small hook on it before we started working with it.

It’s going to turn out perfectly.

Another option is to allow yourself as much slack as you need and simply rely on gravity to assist you in your endeavors if necessary.

In order to get the most out of that additional little amount of slack, feed it all the way into the pole.

We may now begin to feed the rest of the material through.

As a result, this will be sufficient.

Now, this is connected, and we will use it to feed back information into the poll.

That’s it, I’m done with you.

We at Next Adventure are not a repair business, but we strongly believe in the value of recycling and extending the life of your gear.

We aim to provide our customers the ability to fix their own equipment. Come come in and have a conversation with us about it. We want to look into options for you to continue to use the equipment you enjoy.

How to Fix a Tent Pole

Documentation Download Documentation Download Documentation Breaking a tent pole might bring your camping vacation dreams crashing down around you, literally, if you’re not careful. That is, unless you know how to do a few simple repairs on your own. A few simple, readily-available supplies will have you back in the warmth and safety of your dependable shelter in minutes, whether you’re tape up a pole that’s been split down the middle, strengthening a broken part, or replacing a worn out shock wire.

  1. 1 Place the damaged pole on a level place and allow it to air dry. This may be accomplished with the use of a portable camping table or picnic table. You may also place the pole on top of a flat piece of equipment, such as a cooler or a toolbox, if you don’t have access to either of these pieces of furniture. The worst-case situation may be solved by placing a smooth rock or a level stretch of ground on the ground.
  • There is no need to disassemble the pole or remove the elastic shock wire that binds it together
  • This is a simple procedure. Clean up any leaves, twigs, pine needles, sand or other similar material from your work surface before you continue. It is possible that if any of these materials make their way onto your tape, they will impair its ability to adhere correctly.
  • 2 Cut a piece of gaffer’s tape the same length as the split part and place it over the split segment. To decide how long a strip of tape you will require, align the loose end of the tape with the extreme end of the segment, then gently unspool the roll until you reach the far end of the segment. Cleanly tear the tape to ensure that both ends are perfectly square
  • Gaffer’s tape is a sort of heavy-duty, high-strength tape that is widely used to repair electrical and mechanical components. It is also known as gaffer’s tape duct tape. You can pick up a roll of gaffer’s tape for a few dollars at any hardware shop or home improvement center
  • If you didn’t bring any gaffer’s tape with you, an ordinary roll of duct tape will enough
  • If you forgot to bring gaffer’s tape, an ordinary roll of duct tape would suffice
  • Tip: This simple, no-frills solution is best suited for emergency scenarios, such as when a pole splits on you while you’re already out in the woods. Advertisement
  • s3 Place the lateral edge of the tape over the split and press firmly into place. Cover the full length of the split with a strip of tape measuring 1 4–1 2inch (0.64–1.27 cm). Depending on the breadth of the roll you’re working with, you’ll have between 1 2 and 11 2 inches (1.3 and 3.8 cm) of reinforcement left over.
  • It is significantly more beneficial to tape a split longitudinally than than merely covering the ends of the split. The greater the amount of surface area on which the tape can attach, the more securely it will clamp the split together.
  • 4 Continue wrapping the tape around the divide until it is completely covered. Fold the tape with care to prevent leaving wrinkles or creases in the fabric. The pads of your fingers can be used to smooth down the strip once you’ve secured the entire strip in place. You are now free to continue erecting your tent without any further concerns.
  • By wrapping the tape in this manner, you will be able to overlap the split itself at least twice while simultaneously tying the remainder of its length. It should be fine to go for the rest of the season, if not longer, if you use the proper type of tape and wrap your pole tightly.
  1. 1 If required, trim or break off the jagged edges surrounding the break to prevent it from fraying. Remove any shards or splinters that are visible extending out beyond the shaft of the segment with wire cutters, or pry them loose with a pair of pliers if they are stuck in the shaft of the segment. This will ensure that the afflicted area has a consistent thickness and that the rough edges do not cause more harm.
  • It’s possible that you’ll have to manually bend aluminum poles back into shape in order for them to fit inside the tent pole repair sleeves that you’ll be utilizing. A large number of aluminum tent poles can be bent by hand, but if you are having trouble, you may try using an arbor press in the same way that you would bend tiny aluminum sheet pieces.
  • It’s possible that you’ll have to bend aluminum poles back into shape by hand in order for them to fit inside the tent pole repair sleeves that you’re going to use. The majority of aluminum tent poles can be bent by hand
  • But, if you are having trouble, you may try using an arbor press in the same manner you would bend tiny aluminum sheet pieces.
  • Most modern tents come with at least one repair sleeve, which allows you to do quick repairs in the field. These are often constructed of an ultra-strong aluminum alloy, which results in a splint that is both durable and lightweight. Alternatively, if you don’t have a repair sleeve available, a tent pole or a stout stick might be used as a substitute.
  • Tip: Although it is not required to disassemble the pole in order to slide the sleeve into position, it may be more convenient to do so. 3 Duct or gaffer’s tape can be used to secure the ends of the sleeve. Strips of 4–6 in (10–15 cm) wide tape should be torn off the pole and wound around the spots on the pole where they emerge from the sleeve’s outer borders. After you’ve applied the tape, you’ll be free to set up and pack your tent as you usually would, safe in the knowledge that the splint will function to stabilize the fracture.
  • Feel free to wrap the tape around the sleeve as many times as necessary to be absolutely ensure that it remains in place. You may even go all the way around the sleeve if you want to
  • Despite the fact that the usual tent pole repair sleeve is durable enough to withstand numerous camping seasons, it’s a good idea to locate a new pole as soon as possible after the incident occurs.
  1. First, look for an identically sized replacement section to use in place of the damaged pole. Some tent manufacturers include replacement parts with their products, such as poles and pole segments, in the initial packaging. It’s possible that your tent didn’t come with any replacement parts, in which case you’ll have to buy a new section from the original manufacturer. If you’re buying an old segment, make sure you measure it across the opening to ensure you’re obtaining one with the correct measurements.
  • You may also be able to locate a specific pole segment that meets your requirements on a website or via a merchant that specializes in old outdoor equipment. Replacement tent pole segments are often constructed considerably longer than conventional tent pole segments, allowing them to be readily trimmed to fit
  • However, replacement tent pole segments are not always made this way.
  • 2 Measure and mark the length of the new section to ensure that it is the same length as the previous one. Place the two segments side-by-side on a level surface with their bottom edges lined and their bottom edges aligned. Use a felt-tipped marker to draw a thin line on the shaft of the new section where the previous segment stops, and then cut along that line. This line will identify the location of the new section segment where you will be performing the necessary alterations
  • Alternatively, you can place a strip of contrasting masking or painter’s tape around the segment to indicate where you want to make your cut. If your poles are constructed of fiberglass, cutting through the tape rather than the exposed shaft may also assist to prevent cracking or splitting. Don’t worry about being too accurate here
  • The goal is to prevent cracking or splitting. Whatever the length of the new segment is relative to the length of the original section, it will perform perfectly.
  • 3 Using a hacksaw, cut the section to the desired length. Orient the pole piece such that the portion bearing the mark you just produced extends beyond the edge of your work surface when you place it at the edge of your work surface. Then, using smooth strokes and steady, moderate pressure, glide the teeth of your hacksaw back and forth over the line. Continue to saw until you reach the end of the segment
  • This will take some time.
  • The opposing end of the section should be held securely in place with your free hand to prevent it from sliding around unexpectedly while you’re attempting to concentrate on sawing. When using your hacksaw, proceed with caution. Despite the fact that they are not very hazardous instruments, an accident might still occur if you are not paying attention to what you are doing.
  • Advice: If you don’t already have one, a small portable hacksaw might be a very helpful addition to your camping kit. 4 Smooth down the rough edges on the cut end of the new section with a file or sandpaper. Following the trimming of the piece to the proper length, all that is needed is to smooth out the new opening with a metal file or a sheet of medium-grit sandpaper to make it seem smooth. A gentle polishing will prevent the elastic shock cord that holds the pole together from fraying once a fresh cut has been made.
  • It is advisable to use sandpaper with a grit that is anywhere between 80 and 120 while doing this activity.
  1. 1 Remove the old cord from the pole by cutting the anchor knots at either end of the pole. Remove the knot from the pole by inserting a pair of needle-nose pliers into the open end of the pole. Cut the rope slightly below the knot with a sharp knife or a pair of scissors, and then wriggle it out of the jointed pole segments with your fingers.
  • When you pull the cable out, be cautious not to lose any of the loose pole pieces that may have come away. Because they’re cylindrical, they’ll be more prone to rolling than other shapes. Due to the fact that you will be dismantling the pole in order to install the new shock cord, now is a good time to replace any pole segments that are showing signs of wear.
  • Tip: Use a felt-tipped marker to number the pole parts, starting with the end that was cut first. Putting them all back together in the proper arrangement will be a piece of cake later on. 2 A knot on one end of the replacement cord will serve as an anchor for the replacement cord. Simply choose a point 4–6 inches (10–15 cm) away from the end of the string and loop it into a basic double overhand knot to complete the look. After that, give the knot a couple of strong tugs to make sure it’s secure
  • A steel washer can be placed on the segment of the rope where you intend to tie your knot if you so choose to do so. The spherical washer will provide something for the rope to bite into and will enhance the longevity of the completed knot, as well as its appearance. Putting a knot on one end of the rope before you start working it through the various segments that make up the pole will prevent it from accidently coming out.
  • 3 Each of your pole segments should have a fresh cable threaded through it. Running the cord through each section one at a time and securing them all together is the quickest and most efficient method of accomplishing this. In most cases, when you purchase a replacement shock cable, it will come with an attachable wire pull-through mechanism, which will assist you in speeding up the procedure somewhat.
  • When pulling the cord through, it may be helpful to have an aide hold each piece for you while you concentrate on pushing the cord through.
  • 4 Remove one end of the cord and tie it off with the pole stretched out to its full length. Once you’ve completed the process of running the new cord through each section, lay the entire assembly down on the floor. Extend the cord to generate some tension, then twist up a second double overhand knot 4–6 inches (10–15 cm) from one end of the cord opposite the one you began with. That is all there is to it.
  • Remember to put a second washer onto the string before tying your final knot if you used one on the first side
  • Otherwise, the knot will not hold. It is important to remember that if your shock cords are connected with metal pull tips rather than anchor knots, you must replace them according to the manufacturer’s specifications.
See also:  What Kind Of Tent Stake In The Core 12 Person Instant Cabin Tent

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • To obtain a new pole for your tent while it is still under warranty, get in touch with the manufacturer. Depending on the circumstances, they may even replace the entire tent for a minimal fee. It will be necessary to reshape steel tent poles by a qualified metal craftsman, albeit it may be more cost-effective in the long run to simply purchase a new set of poles. When looking for spare parts for popular tent types, online purchasing platforms such as eBay may be quite beneficial.

Thank you for submitting a suggestion for consideration! Advertisement

Things You’ll Need

  • Gaffer’s tape or duct tape for tent pole repair
  • A tent pole repair sleeve Wire cutters or pliers (as an alternative)
  • Optional: a tent stake or a stout stick (for use as a makeshift splint)
  • Gaffer’s tape or duct tape for repairing the tent pole pliers or wire cutters (as an alternative)
  • For a DIY splint, a tent stake or robust pole might be used instead.
  • Sharp knife or scissors, steel washer (optional), replacement shock cable (optional), hacksaw (optional), and other miscellaneous supplies. Alternatives include: a file or sandpaper. Optional: a felt-tipped marker

About This Article

Thank you to all writers for contributing to this page, which has been viewed 8,655 times so far.

Did this article help you?

Hey, hey, summer has officially here. Yes, the pandemic implies that some people may be unable to go or camp due to the disease, and many campgrounds will remain closed. However, scattered camping is still an option almost everywhere, and new campsites are being built all the time to accommodate the growing demand. To put it another way, it’s time to break out the tent. Alternatively, if one of the tent poles becomes damaged while being removed from the tent, it is necessary to utilize the little metal sleeve that came with the tent.

I’ve been camping for several decades and had never needed to use one before then.

It took me a while to figure out how the repair sleeve worked because I’d never used one before.

In this little video from MSR, the manufacturer of the Hubba Hubba NX, which is one of my all-time favorite hiking tents, you can see how simple it is to do that repair in the field.

Tension or High Peak Pole Tents

Tents are an important must if you want to keep your outdoor event protected from the elements. A stock of tension tents and high peak tents is essential in allowing your business and increasing its awareness among your customers whether you own a tent rental company or an event hosting company. Tents are useful for a variety of different reasons in addition to offering shelter from the often unpredictable elements of the weather. The most significant advantage of organizing an outdoor event in a tent is the ability to manage the climate.

The air movement within a tent also serves to offer natural cooling, lowering the temperature outside to a level that is pleasant for sleeping.

The presentation of the event is another significant function that tents provide at outdoor gatherings. Tension tents and high peak pole tents have distinct design criteria, which allows them to be used for a variety of presentations depending on their use.

Tension tent

The tension tent is remarkably similar to the standard pole tent in appearance and function. This tent is supported by one or more center poles that are all the same height as the sides of the tent. As a result, if it has a single center pole, it will only have a single peak. If it has two center poles, it will also have two peaks, and vice versa. The tension tent’s perimeter is made up of shorter vertical poles that run parallel to the ground. They are located at the edge of the tent and are connected to the ground by ropes or belts that are attached to stakes hammered into the ground.

Because of this, the tension tent earned the term “tension tent.” Tension tents may be set up on a number of different surfaces, as long as the grounds management allows it to be done.

If there are strict restrictions on driving stakes into the ground, tension tents will only be permitted on soft surfaces such as grass, which will not be damaged by the driving of stakes into the ground.

They provide your event a beautiful appearance primarily as a result of the elegant method in which the tent cover descends from the top to the side.

High Peak pole tent

High peak pole tents have a lot in common with regular pole tents in terms of design and function. High peak pole tents are distinguished by the fact that their slopes are steeper than those of a conventional pole tent. Because of the greater height between the peak of the pole tent and the ground, these tents are particularly well suited for situations where a high clearance to the ceiling is necessary. The following are examples of situations in which having this additional height is beneficial.

  1. The greater the clearance between the ground and the roof, the better the air circulation will be throughout the construction.
  2. When the tent will be used to store huge items of equipment, the enormous ground to ceiling clearance will be quite useful.
  3. As a result, these tents are suitable for events that will make use of large-screen television screens.
  4. Under extremely strong gusts, the structural stability of the building is jeopardized.

Selecting a tent

In addition, high peak pole tents and classic pole tents have a lot in common. The fact that high peak pole tents have steeper slopes than ordinary pole tents is a crucial differentiating characteristic. In order to accommodate big ceiling clearances, pole tents with a higher clearance from their apex to the ground are preferable to other types of tents. The following are examples of situations in which the additional height is required. The circulation of air is one of the most difficult challenges when presenting an event for a large number of people.

In order to accommodate large people, high peak pole tents are quite handy as temporary constructions.

In this case, the height of the equipment is meant to be referenced.

Having such a high peak has many disadvantages. Extremely high winds can have a detrimental effect on the structural stability. Shorter constructions are more stable than higher ones because of the nature of the materials used.

Amazon.com : Stansport 748 Stansport Shock Cord Repiar Kit for Tent Poles : Tent Accessories : Sports & Outdoors

a rating of one out of five stars It was repackaged with tape and some missing pieces. On August 20, 2018, a review was conducted in the United States. This item was delivered to me today, and I couldn’t believe it had been opened, taped back up, and included missing components before. Unacceptable.

Reviews with images

the rating is one out of five It was repackaged with tape and several missing components. On August 20, 2018, a review was published in the United States. It took me a while to realize the box had been opened and wrapped back up before I realized there were pieces that weren’t there anymore. Unacceptable.

Top reviews from other countries

5.0 stars out of 5 for this product Amazing! On May 5, 2019, a reviewer in Canada commented on the verified purchase. Simple to use and excellent in its performance, I want to purchase more to keep with my camping goods. 5.0 stars out of 5 for this product It is simple to complete On the 4th of September, 2019, the review was conducted in Canada. Purchase that has been verified Easy to use, the cable is thicker than the chord that was on my damaged tent pole, but it still fit and was simple to repair when it broke.

a rating of 2.0 out of 5 stars Incompleto:( On March 19, 2020, a review was conducted in Mexico.

5.0 stars out of 5 for this product Want to get a lot of cable at a low price?

I purchased two packets and have enough to complete all of my poles almost three times!

5.0 stars out of 5 for this product It is simple to use.

Leave a Comment

Your email address will not be published. Required fields are marked *