How To Attach A Tent To A Trailer
Many roof top tents feature just a little amount of “headroom” in the sleeping space, which is uncomfortable. In some cases, mounting a tent on a trailer (particularly depending on the height of the trailer) may result in the tent being too low to be functional, especially if you want to hang an awning from it.
Are trailer tents any good?
Using a trailer tent may make camping more convenient and hassle-free if you are seeking for a simple and hassle-free experience. Although a caravan appears to be a place where you can park and have everything you need, there is generally just a limited amount of room inside. Your trailer tent may accompany you everywhere you go as long as your tow vehicle is capable of getting to the location.
What size trailer can I tow without a trailer Licence?
Drivers can tow up to a trailer weighing up to 750kg MAM while driving a vehicle up to 3.5 tonnes or 3,500kg MAM. Tow a trailer weighing more than 750kg MAM as long as the combined weight of the trailer and the towing vehicle does not exceed 3,500kg (maximum allowed weight).
Do you need roof racks for a roof top tent?
The varieties of roof rack fittings available are not all suited for the installation of rooftop tents. We do not advocate utilizing clamp-style fitments or non-specific vehicle tracks for mounting rooftop tents to bars that employ permanent points, vehicle specific track, or gutter mount legs.
Do I need towing mirrors for a trailer tent?
As a result, while certain car/caravan combinations may not require towing mirrors, the vast majority of them are required. Begin with the knowledge that, no matter what type of vehicle you drive – from a single-occupant automobile to a bus or truck – it is a legal necessity to have at least two rear view mirrors. Perhaps you have a clear view through your caravan (or over your trailer tent/folding camper) to the other side.
What cars can tow a tent trailer?
The top ten vehicles for towing with a TowingRam 3500 Heavy Duty pickup truck. The Ram 3500 Heavy Duty truck, with a towing capacity of 31,200 pounds, is the best choice for towing fifth-wheel trailers at the very greatest possible distance. Ford F-450 pickup truck. Chevrolet Silverado 3500HD pickup truck. Ford F-150 pickup truck. Chevrolet Silverado pickup truck Nissan Titan XD is a full-size pickup truck. The Hyundai Santa Fe and the Chrysler Pacifica are also excellent choices.
What is the difference between a trailer tent and a folding camper?
An enclosed trailer tent, which often folds up and out of the way and is fixed to the ground, provides a more spacious living area than the base unit’s surface area. Beds are frequently made to fold out from the trailer’s foundation. Until they are folded out, folding campers resemble the lower half of a caravan with the roof sliced off, as shown in the photo.
Are trailer tents warmer than tents?
Are trailer tents more comfortable to sleep in than tents? As a rule, trailer tents are not significantly warmer than tents. Trailer tents, on the other hand, are warmer at certain times, such as when you’re sleeping, because the beds are elevated. As a result, trailer tents don’t provide much warmth.
What rack do I need for a roof top tent?
To ensure that the rack or bars you purchase have a Dynamic Weight Capacity (DWC) that is at least as strong as the tent, check the manufacturer’s specifications.
The majority of models weigh between 120 and 165 lbs, therefore you will need a rack that can support more than 165 pounds to be on the safe side.
What is the easiest camper trailer to set up?
With the Cruiser, you get a basic, Australian-made trailer as well as Oztrail’s smallest soft-floor camper tent, making it one of the most cheap mini campers available on the market today! Because there is so little to it, it is essentially the simplest soft-floor to install in the whole world. Considering its light weight (280kg), it may be pulled by almost any vehicle.
Do trailer tents have toilets?
Folding campers are often equipped with a base unit that resembles the bottom half of a caravan, which includes a cooker, sink, refrigerator, and a washroom with a toilet. Due to the fact that the entire tent is supported by the trailer, there is no need for pegging.
What is the point of a roof top tent?
Because you’re isolated from the ground while you’re in a rooftop tent, you may be less discriminating when looking for a spot with a great view. 5 Whether you’re traveling alone or with a friend, you’ll have more space than you would in a two-person tent.
Is a trailer tent classed as a tent?
When it comes to folding campers and trailer tents, there is a significant distinction that isn’t usually apparent when the units are set up on the ground. In its simplest form, the trailer tent is a tent that slides out of a trailer and is pegged to the ground, while still utilizing the trailer portion as a sleeping place.
What is the speed limit for towing a trailer on a motorway?
When towing on a highway or dual-carriageway when the speed limit for a car is 70 mph, drive at 60 mph to ensure that you remain on the right side of the law. To be legal on a single-carriageway with a maximum speed limit of 60mph for automobiles, you should tow at no more than 50mph.
How much does a new tent trailer cost?
Average prices range from $3,000 to $7,000 for a new tent trailer with one or more beds, a small dining space, an icebox or mini-refrigerator, and some form of cooking equipment.
Can I tow a trailer tent?
It is probable that your car will be able to pull a trailer tent in the majority of situations because they are quite low weight; nonetheless, it is worth checking, especially if you have a smaller car. If the trailer tent does not have brakes, this might result in an additional issue. If you haven’t made up your mind about your tow vehicle yet, have a peek at our Towcar awards page.
How do you pack a camping trailer?
Items such as clothing, tools, utensils, cooking materials, food, bedding, towels, toiletries and prescriptions should be written down in a basic list. Organise your camping goods into categories such as cooking supplies, bathroom items, clothes and things that you’ll need when camping in the wilderness.
Do you need insurance for a trailer tent?
Unlike auto insurance, trailer tent insurance is not required by law, but it is highly recommended because you would be responsible for the expense of replacing or repairing it if it were damaged or destroyed.
He Put A Tent On A Trailer And Made A Practical Camper
In reality, a pop up camper is nothing more than a large tent attached to a trailer. Josh Biggs had grown up camping with his family. When he was barely three months old, his parents used to take him on camping vacations in an old Jeep Wagoneer with them. His enthusiasm for camping remained strong throughout his adolescence and into adulthood. When I was in my twenties, the thought of lugging a vehicle 30 feet long, weighing 10,000 pounds, and containing $100,000 worth of creature comforts up a hill for a weekend vacation made no sense.
Josh, now an adult, still enjoys basic camping in the great outdoors, with one exception: he prefers a decent bed.
I’ve always like the simplicity of a tent trailer: there’s no extraneous stuff, just the essentials, which I find appealing.
In order to construct his DIY tent camper, he used a classic Jeepetto car, a Harbor Freight utility trailer and an old camping tent for the roof. While he is still putting the finishing touches on his creation, you may learn more about it by visiting Four Wheeler.
Four Wheeler:Average Joe Jeep – Off-Road Camping Trailer On The Cheap
It’s the desire to travel, the freedom of being on the open road. It is not the goal that is important, but rather the trip. It is on a journey around the world. You don’t need a home since when you travel, you’re already at your destination. That’s what it’s like to live in an RV. The difficulty is that organizing an epic RV vacation is a complicated process. We at RV LIFE think that life should be straightforward. As RVers ourselves, we understand the process and have assisted millions of RVers in achieving their travel goals by gaining confidence and completing their journeys.
Join the discussion in any of our fantastic RV forum groups if you have a question regarding ANYTHING connected to recreational vehicle travel.
Step 2: Make a plan for your ideal RV vacation.
Anyone make a camper trailer with attached ground tent?
I keep an 11′ by 11′ tent at the rear of my trailer for protection from the elements. On my most recent vacation, which took place in July, I camped at a genuine campsite with water, sanitation, and electricity. I built up a huge shower base and a portable toilet behind a shower curtain to accommodate my needs. Because the trailer was built on a gravel foundation, there was no actual problem with just putting a gallon or so of water on the ground. I have an L-5 tankless water heater. The tent is also capable of supporting a woodstove.
I looked through your construction and was quite pleased.
What is the best way to build a watertight connection between the trailer and the tent?
It’s not something I’d want to do, nor would I want to be bothered with setting up a bathroom or worrying about a stray gust of wind turning me into the punchline of years of campground jokes.:coffeedrink: In addition, I would put a furnace in the trailer, which would heat both the trailer and the tent at the same time.
Alternatively, a drop-down trailer with only a tiny step up from the tent to the trailer when it is down is an option.
A Guide to Vehicle-Attached Tents & Trailers
The overlanding movement has elevated the practice of rural roughing it to the level of civilized living. Remote vehicle adventure has progressed from sleeping on seats to lodgings that are almost on par with a five-star hotel. Tents and camping trailers that are cutting-edge in design are gathered here for your consideration. Additionally, some of these firms provide complete adventure cars as well as trip consultancy services. Campers with a lot of adrenaline The Adrenalin Blast is a hard-floor camper trailer made of foldable aluminum that can accommodate up to four people.
- The symmetrical tent can accommodate a total of 12 guests.
- ATVs, bicycles, and kayaks may all be pulled on top of the vehicle.
- Designed for the utmost in simplicity and convenience, the Simpson III rooftop tent from ARB is the company’s latest offering.
- This newly revised design utilizes new materials that provide more strength, stiffness, and water resistance than the previous version.
- Included is a high-density foam mattress with a UV-stabilized laminated PVC cover and a bed frame.
- For further information, call ARB USA at 866.293.9078.
- Designed for technical 4-wheelers, the Chaser model features a low center of gravity and great ground clearance, making it an excellent choice.
Besides fuel can holders, storage systems, rooftop tents, freezers, and fully equipped worldwide excursion vehicles, AT also provides advisory services.
AutoHome Since 1958, AutoHome has been manufacturing shelters.
Heavy-duty beds, gear storage compartments, a sturdy aluminum ladder, and even LED lighting on the Maggiolina and Air Top variants are included with AutoHome rooftop tents.
Bivouac Bivouac Camping Trailers is a manufacturer of lightweight, off-road utility trailers and camping trailers for those who love the great outdoors and want to go camping.
Fort serves as the BCT’s centerpiece.
In addition, this trailer is touted as being more cheap than many other models in its category.
Bivouac Camping Trailers480.235.5557, for further information.
XKLUSIV and Series 3 rooftop models blend comfort with traditional design and workmanship to provide an unforgettable experience.
Equipment Expedition Outfitters may be reached at 866.703.1026, for further information.
A company representative claims that its low profile and light weight are superior to those of other comparable rooftop two-person sleeping solutions.
A retractable awning, a ladder extension, and a shower annex are all available as options.
818.253.1322,.
They are designed to withstand the pressures, strains, vibration, and flex that occur in an off-road environment and are developed with reinforcements in numerous important regions to provide maximum protection.
Four Wheel Campers may be reached at (530) 666-1442.
Each is customized to the needs of the customer and is available in a choice of four floor lengths.
Customers may customize the weight of their campers by selecting from a menu of available alternatives.
Trucks with full- and midsize bodies, as well as bed lengths of 512, 612, and 8 feet, may be handled in this facility.
Ironman 4×4 is a four-wheel-drive vehicle.
In addition, the tent is equipped with a climate-control flysheet and a pop-up window awning, as well as a high-density foam mattress, a retractable ladder, and a waterproof PVC vehicle cover.
Ironman 4×4888.882.5531, contact information James Baroud is a writer who lives in New York City.
The wedge-style Discovery vehicle has been rally-tested and, according to the manufacturer, can be built up in five seconds using gas-charged struts.
James Baroud may be reached at 908.454.6973.
The fabric is Hydra-Shied cotton duck canvas, which was chosen for its durability, water-resistant properties, and breathability.
The ceiling height in the inside is five feet.
Moby1 Moby1 creates unique teardrop-style trailers for off-road explorers who want to go light.
High ground clearance, a coil-spring independent trailing A-arm suspension, and adjustable Rancho shocks are just a few of the features on offer.
A variety of enclosable awnings and rooftop tents are available to accommodate groups ranging from a single person to a family of six or more.
Campers in Phoenix, Arizona Phoenix Campers are custom-built and sold directly from the manufacturer.
With anything from a Jeep Wrangler popup to self-contained F-550 and Unimog flatbed/chassis-mount living units, Phoenix tries to provide innovative, high-performance camp units for customers.
The water-resistant tent has tape-sealed seams and can be attached to the back of any SUV, minivan, wagon, or pickup truck equipped with a cap.
The “alligator clamping sleeve” simply detaches from the vehicle, allowing you to leave the tent at the campsite while still enjoying the outdoors.
Rightline Gear may be reached at 888.685.GEAR,.Sportz.
There will be no more unzipping and zipping tent doors, or opening and closing car doors, in order to reach whatever you need from your vehicle.
It also features a 7×6-foot floorless screen room connected for bug-free enjoyment.
Teardrops from Southern California So-Cal Trailers creates handcrafted teardrop trailers for use on and off-road, both on and off-road.
The axle, which weighs 3,500 pounds, is equipped with 10-inch electronic brakes.
The Krawler’s cabin is constructed of a reinforced Baltic birch rib structure, and the doors are double-sealed for added protection against water.
So-Cal Teardrops may be reached at (909-982-1199) for more information.
It is possible to fully sit up on the 212-inch-thick mattress due to the design’s A-frame construction.
The Kukenam comes with universal mounting brackets that are compatible with the majority of roof racks and aftermarket roof bars on the market.
Call Tepui Tents at 800.31987 or Thaler Design at 800.31987 for further information.
The slide-up roof, along with insulated hard walls, provides clearance of up to 6 feet 3 inches.
The roof is equipped with a panoramic window as well as niches for two 120-watt solar power panels.
Information:Thaler Design may be reached at 435.224.3807,.
VMI manufactures lightweight adventure and overlanding trailers, both as factory models and as custom-built variants to meet specific customer requirements.
A strong axle rated at 3,500 pounds, a 3-cubic-foot locking tongue toolbox, and a swing-away spare carrier are just a few of the features.
VMI Offroad may be reached at 360.224.2109.
The Camper Case and Bushwagon are two pop-up camping products made by Wild Boar Products that are available for purchase.
The Camper Case (pictured) is a rooftop camper that can be set up in less than 20 seconds, according to the manufacturer.
Honeycomb fiberglass and 600 Denier tent material are used in the construction of both.
888.998.1980,.
An overlanding option that is convenient, small, and easy to drive, the XPCamper is designed to be a popup vehicle.
The roof is raised by a hydraulic system by three feet, providing 612 feet of headroom.
Carbon fiber and Kevlar are used in the external structure to provide a seamless appearance. Kitchens are standard, and each camper is custom-built to the customer’s specifications. XPCamper may be reached at 415.672.1504 for further information.
Can Rooftop tents Be Used On Trailers? (Solved)
If you enjoy an active lifestyle that includes outdoor activities such as camping, mountain biking, and other sports, there’s a good chance that you’ve heard of — or better yet, that you’ve given some consideration to — rooftop tents. Rooftop tents are small, lightweight tents that can be set up on a roof or on a porch (RTTs). While there are many questions concerning Roof-Top-Tents, many campers (particularly those who are eager to get their hands on one) are wondering about where and how they might utilize them.
As a result, the question arises as to whether RTTs should be utilized on trailers.
It is critical, however, that you be aware of the weight capacity of your trailer.
Here’s an Idea of How to Mount your Rooftop Tent on your Trailer:
A rooftop trailer attached to your camper, utility trailer, or other system is installed in a manner similar to placing it on top of your vehicle. The majority of trailers have a carrying capacity of up to 1,000 lbs, depending on the type of trailer that you have. Mount your rooftop tent to your trailer using the roof racks and mounting tracks that have already been fitted.
Online Roof-Top Tent Stores:
Here are some of the most popular online retailers where you may purchase roof-top tents:
| Stores | Price range | Models | Visit |
|---|---|---|---|
| iKamper | $$-$$$ | 4 | Visit here |
| Thule | $-$$$ | 7 | Visit here |
| CampSaver | $-$$$ | 24 | Visit here |
| RoofNest | $$-$$$ | 7 | Visit here |
How Do You Mount A Roof Top Tent On A Trailer?
It is not as difficult as it appears to mount an RTT on a trailer. In fact, you’ll be astonished at how simple it actually is to do. Installing rooftop tents on top of trailers successfully is all about the equipment that you use, and this is especially true when you use the appropriate tools in the right way, as shown below. Box cutter, 10-millimeter ratcheting wrench, 13-millimeter ratcheting wrench, and hacksaw are among the equipment you’ll need while installing RTT to the wall. In addition, you’ll require the following hardware accessories:
- A Tent Cover
- Wrenches
- Channel Slides (with Nuts and Bolts)
- Bolts with Washers
- Steel Mounting Plates
- Ladder Brackets
- And a Ladder
Aspects such as following the proper procedures for installing RTT on trailers are equally vital. This includes everything from pre-installation to the actual setup process of the tent on top of your trailer. That being said, if you follow these procedures exactly, you will have your RTT mounted on your trailer in no time.
Step 1: Prepare Your Trailer:
Once you’ve gotten your RTT, you’ll want to make sure it’s placed on a surface that is not only clean, but also sturdy. You may create such a surface by simply cleaning off any material that has accumulated on your trailer. Stabilizers are required in order to make your surface stable. If you don’t already have stabilizers, look for ones that are the right size for your trailer’s measurements and get them from a reputable internet retailer.
Step 2: Installing Mounting Tracks:
When putting mounting tracks on your roof rack system, ensure sure they are installed perpendicular to the crossbars or rails of the rack system.
They will be able to quickly attach to the sidebars in this manner. In addition, you’ll need to attach your mounting tracks. These may be completed with the help of washers. Place them on each bolt and carefully insert them into the holes until each bolt is completely inserted.
Step 3: Use Your Ladder:
Once you’ve attached your tracks to the trailer and secured your RTT to it, you’ll need to flip the trailer upside down. You may accomplish this by use the ladder that included with your RTT. Alternatively, if your ladder was sent separately, you would first need to attach it to the tent. This may be accomplished by taking the ladder brackets and aligning them over the pre-drilled holes on the edges of your RTT frame. Check to be that the bolts from the brackets have been removed before you begin attaching the ladder to your tent frame.
Step 4: Cover:
Following the successful operation of your ladder, you’ll want to re-secure your RTT to your trailer’s hitch. Use the C-channel, which is found on the side of your RTT, to do this.
Step 5: Positioning:
The RTT is now on top of your trailer, and it’s time to determine whether or not it needs to be repositioned. This may be accomplished by inserting two channel sliders and the accompanying bolts into each end of the mounting tracks on each side of the mounting tracks. Once you’re finished, raise your RTT a little bit and then adjust the slide/bolt combo so that you have one on each side. Carry out these steps for each section of the mounting track, as well as the intersection of the crossbars.
Step 7: Secure Your Roof Rack:
Steel mounting plates, to be precise, will be required to secure your roof rack. You’ll need four of these in all. Placing them beneath each pair of mounting channel sliders and securing them in place with the included nuts before tightening them with a tool will ensure that they are secure.
How Much Weight Can A Trailer Carry On Top?
This is likely to vary based on the sort of trailer you have available. There are three types of trailers that are extremely regularly utilized in conjunction with RTTs at the moment:
- A-Frame Camper Trailer
- Small Open Utility Trailer
- Pop-Up Camper Trailer
- A-Frame Camper Trailer
The a-frame camper trailer has a carrying capacity of between 1,300 and 2,400 pounds at its maximum weight. The pop-up camper trailer, on the other hand, is capable of towing a load weighing between 1,400 and 3,000 pounds. This provides you with a respectable load capacity of 3,000 lbs. The entire amount of weight that may be transported by a tiny open utility trailer is determined by the type of open utility trailer that is being used. It is possible to transport up to 1,000 lbs of weight with an aluminum utility trailer that is only a few feet long.
How Heavy Are Roof Top Tents?
There is no definitive answer to this topic, however it is generally accepted that RTTs weigh between 100 and 200 pounds. This discrepancy is generally the consequence of a number of factors, the most important of which are the size of your RTT, its sleeping capacity, and the materials used in its construction. In the case of an RTT built to accommodate three or four people, you may anticipate it to weigh in the neighborhood of 200 pounds. A standard RTT built to accommodate one or two persons isn’t all that large in weight.
How Much Support Do These Roof Top Tents Need?
RTTs may be placed on almost any trailer, provided that you have the proper roof rack system in place first. However, it is critical to understand the amount of support they require because this will assist you in selecting the most appropriate support system for your roofing system.
RTTs typically weigh between 95 to 200 pounds in general. As a result, when selecting a roof rack system to hold your RTT, you should search for one that is capable of supporting such a heavy load.
How Much Space Do These Tents Require?
RTTs, on the whole, do not take up a lot of space. Another major reason for their rapid growth — not only in Australia, but also throughout the United States — is their ability to scale quickly and efficiently. In most cases, typical RTTs have closed dimensions of 56 x 48 x 14 inches (WxLxH) and open dimensions of 56 x 96 x 52 inches (WxLxH). It’s worth mentioning that some of the rooms are slightly larger than others when it comes to size. Specifically, we are talking about RTTs with sleeping footprints ranging between 10,586 square inches (79 x 134 inches) and 8,360 square inches (79 x 134 inches) (88 x 95 inches).
Sources:
Did you find this article to be useful? Was the information you received incorrect, or was anything missing? We’d love to hear your opinions on the matter! (PS: We read every piece of feedback.)
Tent to attach to Scamp
| 11-26-2013, 10:33 AM | 1 |
| Junior MemberName: micheleTrailer: scampOregonPosts: 21 | Tent to attach to Scamp
Does anyone know of a structure you can attach to a 13 ftscampdoor? |
| 11-26-2013, 11:05 AM | 2 |
| Senior MemberTrailer: ScampPosts: 7,056 | I would suggest you camp in the trailer for a while before adding more camp set and take down work.One of the really nice things about theScampor other fiberglass trailers is the simplicity, easy to set up camp, easy to break camp. I carry a Paha Que shelter, but seldom use it and it’s pretty easy to set up and take down.It doesn’t fit around the door.Add what you need for now, thing about what you want later.Some of us have gone through a lot of stuff before we completely settled, then some like us have never completely settled in 8 years 50,000 miles and between 500 and 600 nights in ourScamp._ByronAnne enjoying the everyday Saturday thing. |
| 11-26-2013, 12:48 PM | 3 |
| Senior MemberName: AliceTrailer: 2018 Casita SD – Kondo A-Go-GoUtahPosts: 502 | I bought a 10×10 canopy off Craigslist.I take it with me only when I’m going for more than 2-3 days.It is one more thing to pack, put up, take down and unpack.But it provides shade if there is none around, and also a sitting room which a 13′ Scamp is short on.If you are not sure how much use you will get vs. the $$ go Craigslist or yard sales.
_AliceKONDO A-GO-GO – I GO WHERE I’M TOWED |
| 11-26-2013, 04:43 PM | 4 |
| Senior MemberName: bobTrailer: 1996 Casita 17 Spirit Deluxe;1946 Modernistic teardropNew YorkPosts: 5,266 | These type of structures, that attach at the door opening, are sometimes used with teardrop campers, but I don’t know of the source for them. If that is what you want, you may find some info over on the tnttt site. Another option is a bagawningwith screen or solid sides. I believe my friend Gage has a side attachment for his ropepoleawning, and possibly may comment on it. As discussed in a previous thread, we use a 12 X 12 screen house that has flaps to close it in as our living room/ dining room. It depends on the weather, location, and duration of stay whether we set it up or not, but usually we do and it works good for us. EDIT; we also have a canopy like Alice shows above, and it has a side enclosure option. We use it as our cook tent and bike “garage” as a friend named it. |
| 11-26-2013, 07:06 PM | 5 |
| Junior MemberName: micheleTrailer: scampOregonPosts: 21 | Thank you all for the suggestions. I have two very large dogs that are very spoiled. Thought it would give them more room. My Scamp (crystal) has anawning.Michele |
| 11-26-2013, 09:18 PM | 6 |
| ModeratorTrailer: U-Haul 1985Posts: 3,406 | Michele, if you’re looking to extend your living area, you might be able to get side panels for that awning and so it can become your outside room. |
| 11-26-2013, 09:46 PM | 7 |
| Senior MemberTrailer: 1988 16 ft Scamp DeluxePosts: 25,415 | One point in favor of the free standing structure versus panels that attach to an awning is the structure can be moved to an area you prefer. like over the picnic table or closer to the fire ring, etc._Donna D.Ten Forward -2014 Escape 5.0 TA Double Yolk – 1988 16′ Scamp Deluxe |
| 11-27-2013, 12:31 AM | 8 |
| Senior MemberTrailer: ScampPosts: 7,056 | Quote:Originally Posted bybrigadoonThank you all for the suggestions. I have two very large dogs that are very spoiled. Thought it would give them more room. My Scamp (crystal) has an awning.MicheleI don’t have pets so I don’t know what it’s really name is but I’ve seen a type fence around a trailer to keep pets contained.Try a google search for portable pet fence._ByronAnne enjoying the everyday Saturday thing. |
| 11-27-2013, 12:40 AM | 9 |
| Junior MemberName: micheleTrailer: scampOregonPosts: 21 | My dogs are175 and 80 pounds.Thank you for your suggestion but I would have to what up a 6 ft fence lol |
| 11-27-2013, 06:40 AM | 10 |
| Senior MemberTrailer: 16 ft U-Haul VTPosts: 2,825 | We use a canopy also with side screens to keep the bugs out.When the weather is bad, we add wind screens.It gives us more room.Kevin can protect it so well with tarps that we had a dry sitting area in Kentucky in the midst of a windstorm that took down a tree in our campground.It keeps the bugs at bay.It gives us sitting space (We are usually there rather than inside the camper.), and it gives us PARTY space.Yes, it is moreweight, more setup, and more time and trouble, but well worth it.Of course, Kevin can set it up himself, but I doubt I can.If you are by yourself with your dogs, you might have to bribe a neighbor to help you.CindyL |
| 11-27-2013, 10:51 AM | 11 |
| MemberName: ShirleyTrailer: Casita patriotColoradoPosts: 92 | Hi Michele, I was in the same situation as you but I have 3 big dogs and one small one and I did want a shady place for all of us.I purchased an Ozark Trail screen house from Walmart.I can put this up by myself and we have enjoyed it a lot.In addition to using it while camping, I take it to dog nosework trials and it keeps several people and their dogs in the shade.It has an opaque fabric top and screen sides.Two of the sides (opposites) zip so you could have one zip at your camper door and use the other as an exit. Happy Camping |
| 11-27-2013, 10:57 AM | 12 |
| Junior MemberName: micheleTrailer: scampOregonPosts: 21 | Thanks Shirley. Must keep the babies comfortable. |
| 11-27-2013, 02:35 PM | 13 |
| Senior MemberTrailer: Trails West Campster 1970Posts: 3,360 | I have a 10×10 canopy like the one shown and bought a hanging tent from Amazon to hang inside it.The hanging tent contains the dogs (mine are small, though) and provides lots more living space.It has a door at one end that fits over theCampsterdoor (just about 6 feet high) and at the other end for entrance and exit.It works great and can also be used as a free-standing structure (the canopy and tent, not the tent alone, which has no frame.)I also bought screen walls for the canopy but have not tried them to see how well they contain theescapeartist dog. |
| 11-27-2013, 06:50 PM | 14 |
| Senior MemberName: DianeTrailer: Casita, previously u-haul ct13VirginiaPosts: 1,018 | I also use a canopy, I like a shelter over the picnic table and have sidewalls if needed. Sometimes actually have found it easier to hang a tarp over the trailer extended out the front for extra outdoor living space. Comes in handy for periods of rain as shelter. Yes I can put up a canopyhang a tarp by myself. I never leave home without one or both for camping as the camper is so small. |
| 11-27-2013, 07:15 PM | 15 |
| Junior MemberName: TrentTrailer: BurroOregonPosts: 25 | Just ordered one of these last night.Snoop around and you can get it for about $100 off msrp.Not sure if it will work with myburrobut a fella cannot have to much gear.Ill try to post a video once I get it. |
| 11-27-2013, 07:36 PM | 16 |
| Senior MemberTrailer: 1988 16 ft Scamp DeluxePosts: 25,415 | Kelty makes good products. Back-in-the-day, I had a Kelty backboard and pack, sleeping bag and tent! Hope it works out perfectly for you_Donna D.Ten Forward -2014 Escape 5.0 TA Double Yolk – 1988 16′ Scamp Deluxe |
| 11-29-2013, 08:33 PM | 17 |
| Junior MemberName: micheleTrailer: scampOregonPosts: 21 | Thanks everyone for all the suggestions. |
| 11-29-2013, 09:31 PM | 18 |
| Senior MemberTrailer: ScampPosts: 7,056 | As Donna D. says Kelty makes good products.I have several Kelty items.I looked this and decided that it would be somewhat difficult to connect to trailer.I could have used it with my then Blazer, that I knew that the Blazer had a finite life.So I ended up with a Paha Que stand alone.I strongly recommend that you use all the stake out options all the time.I didn’t with my Paha Que and broke one of the poles.Fortunately I could get it repaired, it’s an aluminum pole._ByronAnne enjoying the everyday Saturday thing. |
| 11-29-2013, 09:36 PM | 19 |
| Senior MemberTrailer: ScampPosts: 7,056 | I just thought of something else that might work.A nylon mesh fencing likethis.Along with 4 or 5 steel fence posts.The fence posts will drive into the ground then can be removed.I use them all the time to hold a beach umbrella and telescoping poles for antenna supports._ByronAnne enjoying the everyday Saturday thing. |
| Currently Active Users Viewing This Thread: 1(0 members and 1 guests) |
| Posting Rules |
| Youmay notpost new threadsYoumay notpost repliesYoumay notpost attachmentsYoumay notedit your posts
BB codeisOnSmiliesareOncode isOnHTML code isOffTrackbacksareOff PingbacksareOff RefbacksareOff Forum Rules |
| Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Screen Tent for 13ft Scamp | jamessue | Problem Solving |Owners Helping Owners | 19 | 10-20-201309:46 AM |
| How do i attach a photo to a posting? | Lfoxmont | General Chat | 2 | 09-24-201210:17 AM |
| Canopy attach advice please | Sue and Henry | Problem Solving |Owners Helping Owners | 41 | 08-10-201212:35 AM |
| Attach wood to gelcoat? | artspe | Modifications, Alterations and Updates | 20 | 04-06-201203:20 PM |
| HOW DO I RE-ATTACH BELLY BAND | Mary Lynn K. | Problem Solving |Owners Helping Owners | 19 | 05-30-200605:38 PM |
| » Upcoming Events |
| No events scheduled in the next 465 days. |
Instructions for Putting Up a Camping Tent
Featured image courtesy of Hemera Technologies/AbleStock.com/Getty Images Dome style tents are the most frequent type of tent used for camping and other outdoor activities such as fishing and hunting. Dome tents are more compact and quicker to erect than pup tents, and they are available in a variety of sizes that can accommodate two to eight people, depending on the size. They are small enough to put inside a hiking backpack.
Step 1
To put up your camping tent, find a flat, open area that is free of obstacles. Once you’ve selected a location, clear the ground of any twigs or rocks that might puncture your tent or make sleeping in it unpleasant.
Step 2
Remove the tent from its packing and set it up on your camping spot so that the top is visible from the outside. Locate the door and turn it so that it faces the direction of your camp site. Drag each of the tent’s four corners to the location you like for them to be.
Step 3
All of the support rods should be grouped together. They are divided into thirds or fourths, but each portion is connected to the next by a thread, making it simple to put them all together. Two long rods will be used for dome tents of average size.
Step 4
Using the rod, insert it into the rod slides located in each corner of the tent. Slide the rod through to the other end, making sure it is completely through. Because there is a gap in the slip towards the top of the tent, you will need to direct the rod to the second slip.
Step 5
Then, to attach the rod, move to the other end of your tent and put an identical rod’s opposite end into a corner socket. Repeat this process on all four corners of your tent. The plugs may be located on a flap on each corner of the tent, one on each side of the tent. This procedure should be repeated for the ends of each rod. You will be able to lift the tent off the ground after you are completed.
Step 6
Stakes should be driven into each corner of the tent. The stake site is immediately adjacent to the socket into which the rods were placed. Placing pegs on the ground beneath the tent can keep it from blowing away in the wind. The final form of the tent will be determined after the pegs are in place. BibliographyWriter’s Bio Venezuelan-born Vanessa Padgalskas was born and raised in the Spokane, Washington, area and presently resides in Portland, Oregon.
Padgalskas received his bachelor’s and master’s degrees in international studies and economics from American University in 2007. She graduated from Lewis and Clark Law School with a Juris Doctorate.
How to repair a tent trailer ceiling using Special T glue
Written by: Allen MichaelfromSaws The Saws Hub project became essential as a result of my assuming ownership of my family’s camp trailer. This brings back many happy memories from my youth. Every summer, we traveled across the country in it with our family, including a remarkable journey throughout the whole United States. Similarly, I’d like to establish a similar tradition with my expanding family. I started renovating the ancient family tent trailer as a fun DIY project, and I started with the inside ceiling, which took the longest to complete.
Tent Trailer History
This Coleman tent trailer is a vintage; it was built in 1979, making it more than 40 years old. However, they produce a high-quality product, and the bones were still in fantastic condition. However, in order to make it truly enjoyable to use, I needed to do certain repairs and enhancements. Fortunately, the most of it was minor. The frame and body are in good condition and may be put to good use. A new canvas wall was installed in lieu of the old canvas walls around 20 years ago. Because the roof has not been leaking, the canvas is still dry and does not have any stains or mold on it.
- The mechanism for raising the roof was still in working order.
- As a result, I purchased two new tires as well as a new spare tire.
- The internal ceiling was one of the things that truly needed to be repaired.
- The adhesive had failed, and the ceiling was collapsing in on itself!
The Research Phase
In the first place, there is surprisingly little information accessible on the internet on how to repair and restore a trailer ceiling. The majority of the options I saw required screwing into the existing ceiling using wood screws. According to what I previously stated, the roof did not leak, and it was crucial to me that it remained that way. I didn’t want to screw straight into the ceiling for fear of generating a leak if the screws broke through and caused a hole. As a result, the problem became rebuilding that ceiling while avoiding contact with the metal roof shell with any sharp objects.
- Everything I did didn’t want to come into contact with the metal top, or roof, of the trailer. I didn’t want to screw anything into the roof because doing so could create a situation where water could get through
- I wanted to create an interior ceiling that looked nice while also being highly functional and simple to install
- I didn’t want to screw anything into the roof because doing so could create a situation where water could get through. This roof had served me well and was watertight for 40 years, and I had no intention of changing it.
I decided against installing thin carpet or linoleum on the ceiling and instead went with plywood as the ceiling material. We weren’t sure if we wanted a completed wood look in the finished ceiling or if we wanted a clean, painted look in the final ceiling when we started.
At the conclusion of the day, I decided to glue the ceiling into position. So, in order to fulfill my goals, I would want a really powerful adhesive that would hold the new ceiling in place for an extended period of time. Underneath the sinking vinyl is an old wood ceiling.
Replacing the Tent Trailer Ceiling
I would require the following materials: 1/8″ plywood for the ceiling; furring strips; 14″ wood screws; a circular saw; a screwdriver; and a track saw. T Glue with a Difference The following are the procedures I used in order to install the new plywood ceiling: 1.I began by prepping the existing ceiling to accommodate the furring strips and joists. I was going to be gluing the strips to the roof, so I wanted to make sure the surface was as clean and level as possible. Additionally, I was responsible for designing the electrical route that would go through the new ceiling.
- 3.I measured and prepared to put furring strips width-wise along the roof, aiming for a distance of approximately 1 ft between each furring strip.
- 4.After that, I started the process of putting the furring strips in place on the ceiling.
- I didn’t want to screw anything into the metal roof, so I used Special ‘T’ adhesive to attach the furring strips to the roof instead of screws.
- 5.After attaching the furring strips, I waited for the adhesive to dry and cure completely over the course of a weekend.
- However, allowing it to heal is always a good idea.
- The track saw was ideal because it allowed me to lay down the enormous sheets of plywood on the foam insulation that was resting on the ground and make excellent, exact cuts without having to move them.
- I used wood screws to attach the plywood to the furring strips, which I found to be rather effective.
- We’re almost halfway through the process of mounting the wood panels to the ceiling.
- When it was finished, I had a whole new ceiling that looked fantastic.
- This enabled me to achieve my aim of installing a ceiling without having to make any changes to the roof, which was 40 years old.
A Canvas Wall Tent – Camping Without Hauling a Trailer
Many years ago, we felt that a wall tent would be an excellent option to sleeping in the back of the vehicle or in our backpacking tents, especially in cold weather and when we were planning on sleeping in close proximity to the truck in any case. Naturally, we like the convenience of sleeping in a beautiful, heated camping trailer, but getting a trailer in and out of some of the rougher Forest Service and Bureau of Land Management roads can be a real challenge, especially later in the hunting season when the snow starts to pile up.
- In the previous ten years, I’ve witnessed two consecutive Elk seasons during which many hunters spent days attempting to get their trailers off the mountain following snow storms.
- I was relieved not to have been a part of that catastrophe.
- Every year, anyone who drives a trailer into the higher elevation mountains between mid-October and mid-November runs the risk of having their trailer stuck on the mountain for the whole winter.
- The weather forecasts should be closely monitored over this time period to avoid being caught out in the rain.
- In reality, when I was writing this, we were making preparations for a hunt that would begin in early October, and it was snowing outdoors outside.
We had been hunting at 9,400 feet on dry terrain just a few days before, but there was at least a foot of snow on the ground by then. After a few days, I was allowed to drive back up to the location, but I didn’t notice any more trailers being transported up to the location that year.
Our First Wall Tent
While researching a wall tent, we didn’t know anybody who had one, so we conducted some research into the pricing and other alternatives to consider before making our final decision and purchasing a wall tent. Based on our research, we’ve put up a shopping guide for wall tents. The tent includes two screened windows that are closed with a canvas flap that is fastened to the tent using velcro. Our tent is 12 x 14 feet in size, with sides that are 5 feet high and a center that is 8 feet high. It includes one door, a sewed in screen door, two windows and a stove jack (a fireproof fiberglass hole for a smoke stack), as well as frame angles for a four-rafter internal frame.
We made the decision to purchase the stove separately.
The tent weights around 60 pounds, and the total weight of the tent, including the 12 internal frame angles, 25 poles, stakes, and rope, is less than 100 pounds.
As a result, the wall tent may be transported everywhere the truck can drive.
Tips for Assembling the Wall Tent Frame
I can set up the entire tent with my wife in about 15-20 minutes without the stove and in about 20-25 minutes with the stove and stove pipe if we are both motivated. The construction of the interior frame is the most time-consuming element of the process. In order to facilitate assembly, the internal frame was marked at the angles and poles (see Figure 2). The frame angles are fastened to poles that link to other frame angles via which they are suspended. They are maintained in place by friction as they are merely slipped into their respective frame corners.
The ridge pole components were all painted blue, while the pieces on one side of the pole were painted white, and the ones on the other side were painted black.
Yes, I created a cheat sheet in the event that I forgot something.
Setting Up the Wall Tent is Fairly Simple
The first stage is to build the interior frame, with the exception of the legs, and then to pull the tent over the frame. Following that, one side of the frame is lifted at a time to allow the legs to be joined to the frame. The tent is then “squared up” and staked down, starting with the corners and working your way along the sides. We have built up the wall tent in less time than I have seen some people level their trailers, which is impressive. Following the setup of the tent, the floor (tarp or ground cloth) is rolled out and the cots and table are placed in their proper locations.
If we don’t want heat, we don’t set up the stove under the stove jack.
Wall Tent Assembly
That’s all there is to it, Home Sweet Home for as long as we require it to serve us. Our wall tent is, without a doubt, far more roomy and comfortable than our hiking tents. We never utilized the bigger family type tents, but the wall tent has an advantage in this situation as well since it can be heated and heated water with a wood stove, which we did not have. Is a wall tent preferable than a trailer in terms of functionality? That is dependent on the situation. Do you want to be more comfortable?
Is it simpler to pull when the roads are terrible or when the weather is bad?
And, even after purchasing the wall tent and stove, we still have money left over in our pockets.
Advantages of Wall Tent over Trailer
- Cost: $1,000 (or less) against $10,000 (or more). There are no charges for tags, insurance, or registration. lightweight (150 lbs as opposed to 2,000 pounds or more)
- It is less difficult to transport on rough roads
- If the truck can travel, so can the wall tent. Storage that is small enough to fit in the trunk of a mid-sized automobile
- It is possible to load by horseback or with a gaming cart. It is less difficult to put up on sloping terrain. In case of an emergency, a wall tent and a wood stove may always be utilized as shelter.
Advantages of Trailer over Wall Tent
- Comfort — there is no doubt that a decent, well-equipped trailer is more comfortable. Occasionally, water may drip down the frame and pool on the floor. Wood stove vs. gas heater: The wood stove requires more maintenance (wood heats you twice as much as propane)
- People, bears, and nasty crawlies pose a greater threat to security. As a precaution, we set up a small electric fence when we are concerned about bears. It is possible that the ground within the tent is not level.
Please let us know if you have any further pros or negatives to add.
A Second Wall Tent
Our Elk Mountain Wall Tent is 13 by 13 feet. Elk Mountain Tents has provided us with a second wall tent. Due to the fact that we have two tents, we can accommodate additional family members or guests without feeling cramped or having to give up our privacy (or theirs). Take a look at how much space is available for our two cots and the wood stove. A handful of photographs shot recently on a late-season hunting trip are shown below: The fact that there was no snow on the ground is astounding, but it was still cold enough at night that we were glad to have the Cylinder stove to keep us warm.
Keep an eye out for a comprehensive review in the near future.
What exactly are your worries?
Continue reading our posts about wall tents by clicking on the following links:
- Wall Tent Buying Guide
- Canvas 101
- Wall Tent – What Size to Get
- Wall Tent – What Size to Get How Many Rafters Do You Need for a Wall Tent Internal Frame? Choosing the Correct Size for the Internal Frame of a Wall Tent
- Wood burning stoves for use with wall tents
