Quick Answer: How Many 600W A 10X 10 Tent
Member who is well-known. The basic rule of thumb is 25-50 watts of light per square foot; if your space is 100 square feet, you’ll need between 250 and 5000 watts.
How many watts do I need for a 10×10 grow tent?
The member has a good reputation. Because the normal rule of thumb is 25-50 watts of light per square foot, and because your room is 100 square feet, you’ll need between 250 and 5000 pounds of lighting.
How many plants fit in a 10×10?
It is possible to cultivate more than 1,700 little plants in a room of this size, as well as anywhere from 190 to 430 medium-sized plants: 24 to 96 plants for bigger or bushier plants. Knowing the sizes of your plants is critical if you want to use an indoor area for your garden.
What size grow room for 12 plants?
John, A space of 8’8’x8′ can accommodate 12-16 plants comfortably, however it is a little cramped. Because of the varying lighting schedules, you may expect to receive approximately four plants if you want to grow fairly large plants indoors. If you want to grow smaller plants indoors, you can expect to acquire about two plants.
How much electricity does a 1000w bulb use?
You must multiply your watts by 1,000 to get your wattage (1,000 kilowats in 1 watt). For example, if we were to use a 1000 watt grow light for eighteen hours a day at the kWh rate we mentioned previously, our formula would be: 1 x $0.1559 x eighteen hours x thirty days = $84.186/month.
Is 600w enough for 4 plants?
There are two types of autos: plants that are 2 months old and plants that are 3 months old. The yield of 2 month plants should be around 40g per plant, which means that with roughly 9 plants, you’ll be able to cover a square meter with ease and receive up to 400g per 600w light. 3 month autoflowering plants, on the other hand, grow significantly larger, thus you should only plant four of them per 600w bulb.
How much area does a 1000w HPS cover?
The power output of these lights ranges from 100 to 1000 watts. The lights with 400 and 1000 watts of power are the most useful. When hanging 2 feet above the plants, a 1000 watt grow lamp can illuminate an area of around 7 feet square when suspended 2 feet above the plants. A 400-watt lamp would be sufficient for illuminating an area around 4 feet square.
What size exhaust fan for 5×5 grow tent?
Another 6 or 8-inch fan should be used for tent exhaust. This fan should be mounted again outside the tent, this time near to the outside air opening. If you are concerned about stinking air blowing outside the tent, you may hang the necessary charcoal filter inside the tent. This will prevent this from happening.
How much area does a 600-watt HPS cover?
HPS grow lights with a power output of 600 watts are the most efficient HPS grow lights available. 600W high-pressure sodium (HPS) grow lights generate more light per watt consumed than other wattages and cover an area of approximately 36 square feet.
What size LED light for 2×2 grow tent?
3. California Light Works is a lighting design company based in California. SolarXtreme 250 LED Grow Light is a high-performance LED grow light. With a power consumption of 200 watts, the SolarXtreme 250 cannabis LED light is appropriate for places up to 9 square feet in size. As a result, a 2′ x 2′ tent or a 3′ x 3′ tent will work perfectly with this light.
How big of a tent do I need for 2 plants?
Here’s a short guide to size your tent based on the number of plants you’ll be growing: Two-foot-by-two-foot grow tent — Ideal for mother plants (1-2 plants) 2′ x 4′ Grow Tent — This size is suitable for most closets (2-4 plants) 3′ by 3′ Grow Tent — This size is ideal for folks who have a limited amount of space to work (2-4 plants)
How many plants can you grow with a 600-watt light?
Sixteen plants grown under a 600-watt high-pressure sodium lamp (HPS) could generate around 37.5 grams (1.3 oz) of marijuana each plant. Plants may produce yields of up to 500 grams (17.5 oz) per plant when grown in ideal outdoor circumstances.
How many lights do I need for a 10×10 grow room?
When it comes to lighting, the basic rule of thumb is 25-50 watts per square foot. If you have 100 square feet, you’ll need between 2500-5000 watts of light. Visit the LED forums on this site; they appear to be the best option, particularly if heat is a concern. To view the complete response, please click here.
What size light for 5×5 grow tent?
For a 5×5 tent, it is advisable to use lights that are around 1000 watts (High-Pressure Sodium). Although HPS lights appear to be yellow in hue, they actually contain color spectrums that are yellow and red. Plants that bloom well in both spectrums are encouraged to do so.
Can I veg with 600w HPS?
For vegetables, the hps will enough. They may become a bit stressed out when the illumination is changed at first, but they will persevere and get through it.
Can you have too much light in a grow room?
Despite the fact that too much light can be detrimental to plant development, it is also a rather simple problem to resolve. Experts recommend 100 watts of light for a 2 foot by 2 foot grow area and up to 1,000 watts of light for an 8 foot by 8 foot grow area, depending on the size of the grow area.
What wattage for 3×3 grow tent?
When growing cannabis in a 3 by 3 foot grow tent, the fewest amount of electricity required is 40 watts per plant, while the best grow lights require at least 200 watts for the entire tent.
What size LED light for 3×3 grow tent?
Growing space requires the appropriate quantity of light intensity for the plant’s development stage, which is determined by the plant’s growth stage. Your plants may experience excessive or insufficient light intensity at various points during the day. Both of them are detrimental to the growth of your plant. A 250-watt high-pressure sodium (HPS) grow lamp should be considered for a 3-3 foot grow tent.
What size light for 4×4 grow tent?
To light a 44 tent, a grow lamp with an actual wattage range of 500-600 watts should be used (assuming blooming plants that demand a lot of light and are collected in a single location). Plants in high-light conditions require around half of this wattage for vegetative development.
What size carbon filter for 5×5 grow tent?
Table of Carbon Filter Sizes based on Grow Tent Dimensions Size of a Serial Grow Tent Dimensions of the carbon filter 3 5 5 6-inch or larger, or 6″x12″ or 8″x12″ 4 2 2 4-inch 5 4 8 8-inch filter 3 5 5 6-inch or larger, or 6″x12″ or 8″x12″ 6 1010 8-inch filters or an 8’x24′ carbon filter are required.
How many cars fit in a 5×5 tent?
In a 55 tent, there are nine automobiles.
How much can you yield off 1000 watts?
The average output with a single 1000-watt light is around 2 pounds every harvest. Sometimes it’s lower, like 1.5 lbs, and sometimes it’s higher, like 2.25 lbs, for me.
How much light for a 10×10 tent?
You are currently using an out-of-date web browser. It is possible that this or other websites will not show correctly. You need either upgrade your browser or switch to another one. My concern is that I have a 10×10 tent that I am setting up and I purchased a 7′ light rail for lighting from E-Bay to go with it. What kind of lighting should I use in conjunction with the rail? I was thinking of three 600W high-pressure sodium lamps. Please provide me with some guidance. No, no, no, you’re going to need more than that for sure.
However, 45 watts per square foot is where most people use. 50 watts per square foot is best. If you’re going to use that little wattage, you’d be better off doing a smaller room, which would yield more. What about my 7-foot light-moving machine?
PitViper
Okay, so here’s the situation: For illumination, I purchased an 8′ light rail from E-Bay to go with my 10×10 tent that I’m setting up. What kind of lighting should I use in conjunction with the rail? I was thinking of three 600W high-pressure sodium lamps. Please provide me with some guidance. I have a 10×10-foot space. I have two 1kHPS and two 27-foot movers. Only 20 cents per square foot, or around 28 cents per square foot when movers are included. The first few pages of my journal demonstrate what will happen as a result of this.
- as much as you can afford in terms of power, cooling, and heating, among other things 1K in a 4×4 tent is one of my favorite things.
- It cost me $300 to purchase my 3×3 foot tent.
- I can only image how much your power bill will end up costing you in the end.
- Now, I can picture how many 600-watt bulbs, as well as the additional exhaust fans, you’ll be running to keep the heat at bay.
4000w 10×10 tent ideas for maximum yeild
Date of joining: April 22, 2019 Messages:51 Likes Received:38 Hello everyone, I’m a newcomer here. I’m looking for some advise or assistance with my setup. Here’s a little background: Basement with a 6 1/2-foot-high ceiling Soil is used as a medium (pro-mix) Cyco platinum kit, great white, AN calmag plus (with RO water), blizzard ultra are some of the nitrates. Propagation: clones are taken shortly before the 12/12 transition, allowing them to have around a 6-week vegetative period after being removed from the cloner.
- 8-week flowering gg4 8-week flowering Pakistani purp kush x Pakistani bubba kush -csi humboldt I Defoliate on day 1 of flowering for ghost (since it is incredibly leafy, this is a requirement, according to my research), then again on day 21 for all strains.
- 1 tent (30×30) with a single plant (ghost og) 750 watts for a 10 gram pot (1000w batwing turned to 75 percent ) scrog out, fought heat the whole grow, reaching temperatures of 100 degrees at times, and yielded 9 1/2 ounces of foxtails.
- Nutes (a lot of material dropping out of solution) to lst, lollipop, super cropping, and scrog are all examples of techniques.
- 1 The lighting system consists of a 10×10 1000w batwing and a cheap “1000w” LED that is more like 200w (3 Ghost OG and 4 Gorilla glue4), all in 10g fabric pots.
- placing plants in a U shape around three of the tent’s four corners I had all of my plants scrogged, but I ultimately removed the ghost out of the nets and left them freestanding so that I could cluster everything closer together for greater light and ventilation.
- 2200w (1000w batwing + hydrofarm 6) 1 10×10 2200w “hood with air cooling and a lousy LED) The temperatures were incredible for the middle of January.
- Gg4 in scrog, everything else is freestanding, including tomato cages.
Tent 10×10 with a 4000w generator is now in use.
7 gal plastic pots with 14 plants (6 glue scrogged, 7 ghost, and 1 paki in freestanding Tomato cages) are being used to grow the plants.
My temperatures remain between 73 and 77 degrees, and if it reaches 77 degrees, I will take a 6 “The fan begins to draw in chilly air from the outside.
55 percent relative humidity Yeild: This does not appear to be a nice appearance.
3.5 gallon aero cloner with 21 spots.
Hortilux bulbs are something I’m thinking of doing.
Following my viewing of this, I will be making the transition within the next two weeks.
I believe that this will help me with my delayed vegetable development as well as generally beefier plants and blossom.
I have a 40 gallon reservoir with a 100 gallon per day RO system, so all I’d need is the fun stuff (pump, tubing, flow valves on each plant).
Once the micro split is placed, open the hoods so that the glass and cooltubes do not obstruct the valuable light that I am paying for.
Cyco is a good product; I’ve had good experiences with it, and it flushes clean.
As a result, I was thinking of switching to Mills because the folks at the local hydro business swear by it and it is just four or five bottles.
I couldn’t say anything.
Coco appears to practically double the growth of both vegetables and flowers.
I’m surprised to find out that I’ve been dealing with 8-10 bottles at a time.
I top and lst and scrog to collect as many tops as I can while also cleaning up the bottoms, but I still wind up with a significant amount of side larf or undeveloped bud at the end of the process.
Should I get out of the tent and construct a panda movie theater?
What do you think?
Is it possible to fill a 10×10 with only 8 plants after only 6 weeks of growth? I want to keep my periods as long as possible without adding any more veg time. Please provide me with any and all recommendations for enhancements that I might make to increase yields!
Papa PuffWell-Known MemberOld School
- Date of joining: December 31, 2016 There have been 36,464 messages and 86,485 likes have been received.
Robbie714Well-Known Member
Date of joining: February 2, 2016 Messages:5,125 Likes Received:7,671 Hello, Ed. It’s great to see you again, Brothera! Take a look at how your lights are beaming straight down instead of spreading out. All of the light is being absorbed by your plants! I’m confident that a Hortilux 630 will be released in the near future! I’d want to experiment with CMH in my 3×3, but I’d only want a Hortilux like yours! Tapatalk was used to send this message from my iPhone.
Papa PuffWell-Known MemberOld School
Date of joining: December 31, 2016 Messages:36,464Likes Received:86,485 They do have a 630, but it’s not the same. It’s great to be able to transport these! Sent from my SM-G935T smartphone using the Grasscity Forum mobile application.
Robbie714Well-Known Member
- Date of joining: February 2, 2016 Messages:5,125 Likes Received:7,671 They do, in fact, have the 630! That’s awesome, I get what you’re saying about shifting them about. Sent from my iPhone using the Tapatalk application
CrackedRenegadeWell-Known Member
- Date of joining: April 22, 2019 Messages:51 Likes Received:38 Let’s get it out there, Coco guys. More labor equals more yields.
FataquiWell-Known Member
Date of joining: February 13, 2016 Messages:773Likes Received:457 My aim is to construct 4 1K DE, centered At 2.5 feet from each corner squared, and then load up 16 plants in four rows of four, each in its own 2.5 x 2.5 sf section. Then, using 21-day-old cuttings or clones, plant them in 10-gallon pots and let them to veg for 7 weeks before flowering them for 9 more weeks. Without any training, you will be able to harvest 240 to 300 zips of neatly trimmed flower from that room every 16 weeks, which would equal three grows each year!
CrackedRenegadeWell-Known Member
- Date of joining: April 22, 2019 Messages:51 Likes Received:38 This is exactly the information I’ve been looking for! Thank you very much, guy! So you’re saying that scrog isn’t welcome? Run them in 4×4 mode. No need to train them, just let them grow upwards and top them once or twice before flowering? taking away the bottoms in order to raise the tops. I have a second vegetable place that I may utilize, albeit it is not large enough to accommodate 16 7-week veggers comfortably. I would put vegetables and flowers in the same room if I were to follow your suggestion.
Robbie714Well-Known Member
- Date of joining: February 2, 2016 Messages:5,125 Likes Received:7,671 If you want to save money, you could make these yourself for much less money. You just need to run 30 watts per square foot, and it would easily cut your energy cost in half. But first, try a few runs with HLG 550s and then maybe move over to LEDs or CMHs to see how they work for you. But, for the time being, I wouldn’t change anything that’s simply meSent from my iPhone through Tapatalk
Robbie714Well-Known Member
Date of joining: February 2, 2016 Messages:5,125 Likes Received:7,671 I would go with what @Fatagui is stating since it makes more sense to me why he is doing it. Tapatalk was used to send this message from my iPhone.
CrackedRenegadeWell-Known Member
- Date of joining: April 22, 2019 Messages:51 Likes Received:38
- My assessment of your 10×10 is that there isn’t enough illumination to achieve appropriate lighting levels. 4000 watts of high-pressure sodium (with good bulbs) would provide around 40 watts per square foot. It is recommended to use 65 per square foot, and they appear to be fairly high above your canopy and probably not evenly distributed. Coco. I really enjoy it, therefore I’d say you’ve made the proper decision by switching to it. The only other thing I would recommend is to make full use of your available area, filling it from corner to corner. The quantity of plants does not important, although more plants will fill the space more rapidly. This is, after all, my two cents and the way I choose to conduct business. My canopy is as follows: Sent from my SM-G950F smartphone using the Grasscity Forum mobile application.
Gorilla Grow Tent 10X10 Need Help
- Date of joining: April 26, 2014 Messages:5Likes Received:1 Well, I’ve just placed an order with my local hydroponics store for a 10 x 10 gorilla grow tent. He was going to assist me in deciding what to put in it, but he was swamped with work and had a large number of customers in the store. He ended up telling me to send him an email with my ideas and he’ll put everything together in a timely manner with an order. So, for my part, I’m going to need assistance. This is my first grow, and money isn’t really an issue here
- I’m just not very familiar with the various types of equipment and such. Basically, I want to fill the tent as much as possible, and my best option, according to him, would be either two 1000w lights or four 400w lights, respectively. I’m essentially optimizing this tent for high yields during the growing season. I’m not sure if I want to continue flowering in this tent or if I should look for another place to flower in. Do you have any recommendations for good products or services? PLEASE INCLUDE ALL RECOMMENDATIONSLOL Thank you in advance, guys and gals
- 10 x 10 = 100 square feet If you use: (4) 1kw lights at 145,000 lumens, you’ll get 5800 lumens per square foot of floor space. If you use: (4) x 600w at 90,000 lumens, you’ll get 3600 lumens per square foot of space. It’s entirely up to you, but I believe the 600’s are vastly underpowered for a grow of that size. Even with one-kilowatters, you’ll need more than four, in my opinion. Date of joining: April 26, 2014 Messages:5Likes Received:1 hmmmm true, maby this guy doesnt know his stuff as well as I thought or I didnt understand
- sYou would be okay with 4 x 1000W MH/HPS. The more light the better, obviously. 4 x 600W is definitely not enough for a 10×10 tent
- Joined:Jul 30, 2016 Messages:1Likes Received:0 Personally I think you’ll be ok with the lights but if you have some extra cash grab an LED as well. I would definitely use the 10×10 to flower and get a smaller lite line tent maybe for veg? I’m running 4x600w in an 8×8 gorilla with 1 ft extender. First time working with the tents and about a wk in. I purchased a small LED for about $60 cheap and used to throw up and pick up any footprint missed by the lights if need be. Keep me posted on your progress. How many crops are you throwing up? Sent from my iPhone usingGrasscity Forum
realdealz28420 AMERICA UNITEOld School
- Date of joining: September 24, 2004 Messages:2,334 Likes Received:990 I’ve need to do a little better at checking things out, boss. This post was two years ago, so it would be best to send a private message, but I’ll boost it so you might get your response
Tent Layouts & Seating Capacity Chart – AA Party and Tent Rentals Dallas – Fort Worth
SIZE | Square Feet | Stand-Up Cocktail (chairs only,no tables) | of chairs will seat (using 8′ rectangles) | of chairs will seat (using 60″round tables) |
---|---|---|---|---|
10×10 | 100 | 16-20 | 10-12 | 10 |
10×20 | 200 | 32-40 | 25-27 | 20 |
10×30 | 300 | 48-60 | 37-40 | 30 |
10×40 | 400 | 65-80 | 50-55 | 40 |
10×50 | 500 | 81-100 | 62-68 | 50 |
10×60 | 600 | 97-120 | 74-81 | 60 |
20×20 | 400 | 65-80 | 50-55 | 40 |
20×30 | 600 | 75-100 | 60-75 | 60 |
20×40 | 800 | 85-120 | 70-100 | 80 |
20×50 | 1000 | 95-140 | 80-100 | 100 |
20×60 | 1200 | 105-160 | 96-120 | 120 |
30×30 | 900 | 150-180 | 96-120 | 72 |
30×50 | 1500 | 188-250 | 150-188 | 120 |
40×40 | 1600 | 260-360 | 200-230 | 160 |
40×60 | 2400 | 400-480 | 300-340 | 240 |
40×80 | 3200 | 530-640 | 400-455 | 320 |
40×100 | 4000 | 650-800 | 500-550 | 400 |
Tent has a floor area of 0 x 20 ft.
6-6′ Tables 48 Chairs | 8-6′ Tables 52 Chairs |
4-60″ Tables 32 Chairs | 5-8′ Tables 48 Chairs |
6-8′ Tables 54 Chairs |
Tent with a floor area of 20 x 30 feet
8-6′ Tables 64 Chairs | 9-6′ Tables 72 Chairs |
6-60″ Tables 48 Chairs | 7-8′ Tables 70 Chairs |
8-8′ Tables 76 Chairs | 100 Chairs |
Twenty-foot-by-thirty-foot tent
10-6′ Tables 80 Chairs | 12-6′ Tables 96 Chairs |
10-60″ Tables 80 Chairs | 10-8′ Tables 100 Chairs |
10-8′ Tables 100 Chairs | 130 Chairs |
Tent with a floor area of 20 x 50 feet Tent measuring 20 x 50 feet with eight-foot tables Tent 20 x 50 feet with two 60-inch-long third tables Tent with a floor area of 20 x 60 feet THERE ARE 20 X 60-FRAME-TENTS AND BANQUET-TABLES Tent with two 60-inch rd tables (20 x 60). Tent with a 30′ x 30′ footprint
8- 8′ rectangle tables w/ 64 chairs and dance floor | 12- 8′ rectangle tables w/ 96 chairs |
8- 60″ rd. tables w/64 chairs | 7- 60″ rd tables w/ 2-8′ rectangle tables, 56- chairs and dance floor |
Tent measuring 30 feet by 50 feet
12- 60″ round tables, 120 chairs, 1- 9′ x 12′ dance floor, 1- Bar, 2- 8′ tables, 1- 48″ round cake table | Cathedral Seating 250 chairs |
Seating for 120 guests 5 foot spacing between tables | 18- 8′ tables, 120 chairs |
30-by-fifty-foot structure
16-60″ round tables, 128 chairs | 12- 60″ round tables, 2- 8′ tables, 1- 6′ table, 1-12′ x 12′ dance floor. 96 chairs |
18- 8′ tables, 3- 6′ tables, 114 chairs | 3- 6′ tables, 14- 8′ tables, 112 chairs,1- dance floor |
20-8′ Tables, 160 chairs |
30-8′ foot Banquet tables, 240 chairs | 24- 60″ round tables,192 chairs |
16-60″ round tables, 2- 8′ banquet tables, 136 chairs, Head table seating 8, 16 x 16 dance floor. 16 4×4 dance floor sections |
Tent Size Calculator
When it comes to selecting a tent, it might be difficult to determine exactly what you’ll require. As an example, in order to determine the type and size of tent you will require, it is necessary to compute the following factors:
Expected Guests
Calculate the approximate number of persons that will be attending your event. This would include all of the persons who are actively participating in the event, eliminating those who are serving or attending as observers.
Event Type
The sort of event has the largest impact on the amount of space required. For cocktail parties and standing tables, double the number of guests by 3 square feet. 8 sq. ft. per guest is recommended for a buffet or reception. A seated supper might need up to 12 square feet of space per person.
Floor Space
Aside from a meal, do you plan on having a stage or a dance floor for your event? These extra floor area considerations will need to be taken into consideration while selecting the most appropriate tent for your requirements. A dance floor, in addition to the guest area, might take up a large chunk of the available space on the floor. Calculate at least 250 square feet for a dance floor, with extra space considered if the guest list is greater. Some occasions necessitate the addition of a separate lounge/reception room distinct from the eating area.
If the space is intended to be used as a through-space, it can be made smaller.
Unlike a conventional quartet or band, which would likely require nothing more than the bare necessities, a “huge band” would require, in addition to a reinforced stage, a significant amount of floor area to accommodate all of the members, as well as space for a speaker.
Will the tent be needed for hours, days, weeks or months?
Structure tents are more suitable for long-term installations than other types of structures since they can resist all types of weather.
Will weather be an issue?
A Structure Tent is the most appropriate choice for large tents that need to be weatherproofed. A frame tent is a good choice if the primary purpose of the tent is to give shade in an area that will not be subjected to strong winds or snow.
10×10 Grow Tent
It is possible to grow plants in the AgroMax 1010 grow tent for a long period of time from start to finish or for stage-specific growing (veg/flowering). See for yourself in the photo above how the tent appears from nearly every angle. The AgroMax 1010 grow tent is lightweight and simple to put up, allowing you to get up and growing in no time. The GROW TENT’s high-quality construction and materials will ensure that it will last a lifetime of use! Instructions for the AgroMax Super XXL 1010 Tent
AgroMax 10×10 Grow Tent FeaturesSpecs:
- The following are the precise measurements: 120′′ wide by 120′′ deep by 79′′ height
- Exceptionally strong steel frame (with thicker poles than most)
- “Skin” made of heavy-duty, light-proof 680D ballistic nylon
- Interior is lined with ultra-reflective “MYLAR” for improved light reflection and dispersion
- Outside is shiny silver. A double door on each side of the tent, on both the front and back sides, allows for total access to the plants. There are 16 switchable 6″ or 8″ vent ports with Velcro-attached cover covers. Removable Water-Proofing Membrane Spills and water are contained within the tent by a double floor. Set-up instructions that are simple to grasp (we also have video tutorials available on the web, see below! )
- With the addition of the EZ View Window
- The manufacturer’s guarantee for the AgroMax grow tent is one year, and it covers both workmanship and material problems.
*Tent is included in the price. All additional equipment is available for purchase individually.
VIVOSUN 10×10 Grow Tent 120
/VIVOSUN 10×10 Grow Tent 120″x120″x80″VIVOSUN 10×10 Grow Tent 120″x120″x80″VIVOSUN 10×10 Grow Tent 120″x120″x80″VIVOSUN 10×10 Grow Tent 120″x120″x80″
VIVOSUN Mylar Reflective Grow Tent is a clever solution to a grower’s needs. Whether you’re starting a new growing operation or have mature plants this grow tent will be the perfect environment for them. Insulated with Mylar, the interior of the tent is 98% reflective, boosting the growth rate of your plants, and with a layer of 600D canvas, your grow tent is both tear-proof and lightproof.
- Construction: The VIVOSUN Grow Tent is made of 600D Oxford material and heavy-duty zippers to prevent any light leakage and assure longevity. Lights and ventilation systems of various sorts may be hung from the all-iron metal frame, which offers substantial support. Human-centered design (HCD) is a method of creating products that are oriented on the needs of people. Vents in a variety of sizes are available for use with various ventilation systems. A set of filter straps is supplied for hanging the filter. An observation window can assist you in keeping track of the progress of your plant’s growth. Keep Growing Under Control: The VIVOSUN Grow Tent allows you to keep track of the humidity, temperature, lighting, and other factors that affect the development. It assists in achieving the best possible results without having to worry
- Installation is simple: It normally takes one person 15-30 minutes to install the grow tent by following the procedures outlined in the instruction manual. Everything you need to put it together is provided
- Warranty for one year is guaranteed.
Tech Spec
Dimension (in.) | 120″ x 120″ x 80″ / 10ft X 5ft |
Weight (lb.) | 98 |
Warranty | 1 Year |
Package Size | 61 x 19 x 7.5 |
Suggested Plant Count | 24-32 |
Suggested Lighting | 6Bar Grow Light fixture |
2pcs- 4pcs VS4000 Watts or Equivalent | |
Recommended Ventilation | 8″ Inline Fan |
Doors | (1) Large Front Door(2) Side Access Doors |
Vents | (2) 11.8″ x 6″Pre-Filter Air Vents |
Windows | (1) Large Front Window |
Ducting Ports | (4) 4″ Ducting Ports / (8) 10″Ducting Ports |
Interior Material | Mylar 98% Reflective |
Exterior Material | Oxford fabric |
Includes | (2)Spill Trays / (4) Filter Straps |
Which tent is the best fit for you? Take a look at our tents and decide which one is right for you. The VIVOSUN 2×2 Grow Tent has a capacity of 24 square meters “24” x 48″ x 24″ Description: VIVOSUN Hydroponic Mylar is a transparent material that allows all light to pass through. 1-2 plants are required. Size of Plant24″ x 24″ x 48″ Dimensions of Plant24″ x 48″ Recommendation for the VS1000Light 4 “Recommendation for Duct Fan Ventilation in Line with Ducts Details VIVOSUN 4×2 Grow Tent with 48″ x 48″ x 48” “The x24x60″VIVOSUN Mylar Reflective Grow Tent is an ingenious invention.
16-24 plants are recommended.
Plants ranging from 24-36 in number Recommended Lighting Capacity120″ x 120″ x 80″DimensionsVS4000 x 2Lighting VS4000 x 2Lighting 8 “Installation of Inline DuctFan Ventilation Is Recommended Detailstop The following items have been added to your cart: Add to cart failed due to the following reasons: succesfully added to wishlist after successful submission
How many plants can i grow in a 10×10 room?
The 10′ by 10′ IndoorGrowRooms can accommodate up to 32 medium-sized plants, or around 24 if you want them to grow larger than typical.
How many grow lights for a 10×10 room?
For example, a grow room 8′ x 8′ would most likely require 4 grow lights, whereas a 10′ × 20′ space may require up to 8 lights.
How many plants can I grow in a 20×20 room?
A 2020garage alone has 400 square feet of space and could easily accommodate 400 plants.
How many plants can you fit in a 8×8 grow tent?
Our8x8portablegrowrooms may accommodate up to 24 medium to big plants or 30 smaller plants. A spare room or garage will be required to accommodate the installation of these giant grow tents due to their enormous size.
How many plants can I grow under 1000w LED?
In our8x8portablegrowrooms, you may grow up to 24 medium to big plants or 30 little plants. Because of their massive size, these monstrousgrow tents will need to be set up in a spare room or garage.
GrowSpace Size | Minimum Number of Watts Required | Number ofPlantsYouCan Grow |
---|---|---|
9 sq ft (3×3) | 450w | 1-9plants * |
12 sq ft (3×4) | 600w | 1-12plants * |
16 sq ft (4×4) | 800w | 1-16plants * |
20 sq ft (4×5) | 1000w | 1-20plants * |
How do I build a small indoor grow room?
How to Construct Your First Indoor Grow Room Setup
- Locate a suitable setup location (such as a spare room, garage, or basement)
- Make your environment as light-tight as possible. Choose how you want to set up your area (a tent, a complete room, or a cabinet within a room)
- Make sure your arrangement has adequate light coverage. Configure an appropriate air exchange system.
How many square feet does a 1000w grow light cover?
The power output of these lights ranges from 100 to 1000 watts. The lights with 400 and 1000 watts of power are the most useful. When hanging 2 feet above the plants, a 1000 watt grow lamp can illuminate an area of approximately 7 feet square when the light is suspended 2 feet above the plants. A 400-watt lamp would be sufficient for illuminating an area around 4 feet square.
How many hours should grow lights be on?
Unlike plants grown outdoors, plants cultivated indoors require more hours of light than plants grown outdoors. When growing food plants under artificial lighting, 14 to 18 hours of light per day is suggested for the majority of edible species. Don’t be tempted to leave the lights on all day — plants require at least six hours of darkness each day in order to thrive.
Does more light equal more yield?
In order to determine whether light truly does equal yield, gardeners can compare their present floweringlight levels to the 1,500 PAR goal. The increase in PAR from 1,000 to 1,500 provides a yield improvement of up to 33 percent.
What is the distance between plants per row?
Plants will be able to grow and thrive in the correct spacing between the rows in your garden, as well as offer you with enough of workspace. In most circumstances, it is a good idea to allow between each row of plants at least 18 to 36 inches of space between them.
How many plants do you get per square?
They are likely to spread and appear a little wild in appearance, but you should have no issue cultivating that many plants per square foot. In the event that you are concerned about their taking up too much room (9 plants produces a lot), 5-6 plants per squarefoot is sufficient; 9 plants per squarefoot is the suggested maximum.
How many plants can you fit in a 4×4 grow tent?
The InsignificantThe Numerous — Sea of Green Training If that wasn’t enough, because SOG plants don’t grow very tall, home growers could fit upwards of 16 plants in a grow tent that was four feet square and four feet long.
How many plants 60×60 grow tent?
Once this is established, and as a general guideline for a SOG type garden, we propose utilizing the following amount of plants, depending on the size of the growtent: A growtent measuring 60 by 60 feet: 9 plants in 4-5 liter pots are being grown.
What size tent do I need for 2 plants?
A short guide on measuring your tent in relation to how many plants you can grow is provided below: 2′ x2′ x2′ GrowTent– This is excellent for motherplants (1- 2 plants) 2 x 4 feet GrowTent– This little tent can fit in most closets (2 -4plants) 3 x 3 ft. GrowTent– This product is ideal for persons who have a restricted work space (2 -4plants)
How many plants in 3×3 grow tent?
One marijuana plant need 2 square feet of area to grow when using this method of cultivating marijuana.
As a result, the answer to the question “How many cannabis plants can you fit in a 3×3 grow tent?” would be four plants using this approach.
Canopy Tent Frame
The 600 Denier Oxford tent fabric is sturdy, scratch resistant, fire retardant, and weather resistant. It is also available in a variety of colors. Full color dye sublimation single sided back walls printed on the highest quality tent material available in the industry. All four valances are attached to the canopy using Velcro to complete the look. The supplementary side walls and back drops are available for purchase. Full color canopies from Next Level Signs give an attractive and professional appearance for your next display and are ideal for any craft show, college fair, flea market, community festival, sporting event, or trade exhibition.
- Large Pop Up Tent Canopy 10′ x 15′ Production Time: After receiving approval of the artwork, production will take between 2 and 4 days.
- Displaying the tent for extended periods of time outside, as well as incorrectly packaging them, can both diminish the life of your goods significantly.
- QuestionsAnswers Q: Is the color of the tent and the hem the same as they are on the outside?
- Q: Is it possible to build the entire wall or canopy out of a single piece of fabric?
- Q:How can I keep the tent from leaking water when I’m using it outside?
- Q:Can you tell me how the tent’s fabric and hardware are packaged?
Event Tent Package
With a pop up tent from Next Level Signs, you can create an eye-catching professional exhibit for your brand or group at any outdoor event. A user-friendly tent structure is equipped with a custom printed cloth canopy that may be customized to feature your company branding, contact information, or event details. Suitable for any craft exhibition, college fair, flea market, community festival, athletic event, or trade expo, among other things. The canopy structure for Next Level Signs is built of lightweight aluminum, making it portable and easy to transport.
A wheeled carry bag is offered as an option. Whatever the occasion, Next Level Signs offers the custom canopy that will be great for your gathering. Specifications for the Event Tent
10′ x 20′ Event Tent Package Includes:
- It includes a 600 Denier Oxford Canopy with three layers of polyurethane coating, an aluminum tent frame with a 40mm Hex bolt pattern, and a full color dye sublimation canopy. Water-resistant and UV-resistant for use both outdoors and inside.
Tent Packages 10′ x 20′ are available in the following sizes:
- Tent back walls are available in single or double sided configurations
- Tent side walls are also available in single or double sided configurations. Aluminum Cross Bar with Plastic Connectors for the Tent Side Walls
Graphic Design Alternatives There are no color restrictions. Dye Sublimation Printing in Full Color Services for Graphic Design Graphics with a high resolution Placement of the logo on the whole side There is no minimum order requirement. Product Precautions When you take down your 10′ x 20′ canopy tent, make sure that the fabric is clean and completely dry before putting it away. Displaying the tent for extended periods of time outside, as well as incorrectly packaging them, can both diminish the life of your goods significantly.
- Questions Answers Q: Is the color of the tent and the hem the same as they are on the outside?
- Q: Is it possible to build the entire wall or canopy out of a single piece of fabric?
- Q:How can I keep the tent from leaking water when I’m using it outside?
- Q:Can you tell me how the tent’s fabric and hardware are packaged?
How Many Plants Can I Fit in a X by X Grow Tent?
If you’ve been looking into this subject for a time, you’ve most likely come across 10 different solutions for each tent size you’re considering. There is a valid explanation for this. Cannabis plants can grow to be enormous in size, depending on the strain, the size of the pot, the growth method, and other factors. The good news is that you have complete control over all of this, and as a result, you have complete control over the growth of your plants. The primary technique by which you do this is through the developing approach you employ.
In case you’re unfamiliar with any of the methods covered, we’ll provide a brief overview of each one, along with the advantages and disadvantages of each one.
How Many Plants Can I Fit In A 2 x 2 Grow Tent?
In a 2 by 2 tent, the majority of individuals will grow a single plant. Use strategies like as low stress training andlollipopping or other sorts of trimming to ensure that your plant fills out the area with the greatest amount of colas possible in a 3 gallon or 5 gallon container. The Sea of Green technique (abbreviated SOG) is another option for growing a high number of tiny plants in a limited amount of space. You will be able to fit four, or possibly more, plants into this area if you do this.
While I understand that there are smaller grow tents available than a 2 by 2 foot space, this is the least size we want to explore for the sake of this article.
Grow tents that are too tiny for a full-cycle grow are not often recommended. They are intended for specialized purposes like as sowing or cloning, with some of the somewhat bigger ones being intended for vegging.
How Many Plants Can You Fit In A 2 x 4 Grow Tent?
Considering that this tent is precisely twice the size of the previous one, you’re most likely imagining that you’ll be able to fit twice as many plants inside it, providing they’re all the same size. And you’re absolutely correct. Small plants may be accommodated in a 2 x 4 foot grow tent, and you can fit as many as eight of them in there. In a 2 by 4 foot space, you can obtain two plants if you let them grow to their “natural” size.
How Many Plants Fit In A 3 x 3 Grow Tent?
When you get to the 3 by 3 size, things start to become interesting. You find yourself with a plethora of possibilities. You could put four plants in this size tent, but you’d have to keep them on the tiny side in order to make them work. You could use the SOG approach to cram even more plants into the space available. You have the potential to grow nine or perhaps more. Alternatively, you may travel the opposite way. You could cultivate a single plant if you wanted to. It goes without saying that you must prevent it from growing too tall, as grow tents have a maximum height restriction.
How Many Plants Can I Fit In A 4 x 4 Grow Tent?
This is the most typical tent size for a home grow, probably because it is ideal for using a 1000 watt HID lamp or a similar LED grow light to illuminate the plant. It’s also small enough to fit comfortably in the majority of households. As with the 33%, there is a great deal of possibility for customization. With SOG, you may produce one enormous (meaning wide, but not extremely tall) plant, four “regular-sized” plants, or as many as 16 or more.
How Many Plants Can You Fit In A 5 x 5 Grow Tent?
For a 1000-watt equivalent grow light, a 55 grow tent is also an excellent choice. The finest LED fixtures have a five-by-five-foot footprint. In a 5 by 5 area, you can grow up to 25 plants using SOG techniques. If you like to let your plants develop to their full potential, one of these tents might accommodate four reasonably large marijuana plants. Some cultivate a single massive plant in a 55 container.
How Many Plants Fit In A 4 x 8 Grow Tent?
Because a 4 by 8 foot grow tent is precisely twice as large as a 4 by 4, you can fit twice as many plants inside as you can in a 4 by 4. The Spider Farmer 4000 has two 1000 watt equivalent lights, which allows you to effortlessly grow two giant plants, eight good-sized plants, or as many as 32 or more little plants in a sea of green growth.
How Many Plants Can I Fit In A 10 x 10 Grow Tent?
Last but not least, we have the enormous 10 by 10 foot tent. It has four times the floor space of a 5 by 5, which means you can grow four times the number of plants in it. You should, however, ensure that there is enough space in there for you to be able to access all of the plants comfortably. However, you may do this by just making them a little smaller.
It is possible to cultivate 100 or more little plants (though you may wish to lower this number somewhat to allow yourself enough space to reach every plant), 25 good-sized marijuana plants, or four enormous cannabis plants in this manner.
What Size Plants Should You Grow?
The amount of marijuana plants that may be accommodated in any given tent size is totally dependent on the size of the plants. Moreover, it is something over which you have some control. Many little plants are preferred by certain growers, whereas few huge plants are preferred by others. There are pros and downsides to both growth strategies, depending on your perspective. Let’s take a closer look at each of them.
Many Small Plants (Sea Of Green)
Using the Sea of Green technique, you may grow a large number of plants in a short amount of space, allowing you to accommodate more plants in your grow area. The end product appears to be a sea of green. This is perhaps the quickest and most straightforward technique of growing, which explains why it is so often used. You begin blooming the plants as soon as possible in order to prevent them from growing into huge plants. A consequence of this is that each plant typically only has one bud location.
The buds, on the other hand, are much smaller than those on a bigger plant.
Advantages
- More harvests each year are possible because of the shorter growing cycle. There is no (or very little) pruning or trimming required. Because it does not require much vertical space, it is cost effective. It does not need a lot of soil (or other media)
Disadvantages
- Colas are smaller than in other ways (but there are more harvests)
- Some countries set restrictions on the number of plants that can be lawfully grown
- Others do not. There are more plants to water and feed with nutrients.
One Huge Plant
The amount of time spent watering and feeding nutrients is reduced if you simply have a single plant to take care of. You will, however, have to put in a lot of stress training, pruning, and cutting to get the results you want. You’ll want to educate your plant to grow horizontally, rather than vertically, so that it spreads out more sideways than it does up. Allow it to grow vertically from there until it has spread out to the side sufficiently to fill the growing area available. As a consequence, you will have the greatest number of bud sites to fill your available space, which equals a larger yield.
- Depending on the size of the object, that is.
- You’ll want to trim and maybe lollipop your plant in order to guarantee that as many bud sites as possible are exposed to light and that the plant focuses all of its efforts to producing those bud sites and nothing else throughout the growing season.
- Once the branches begin to grow vertically, growers use a net or a trellis to hold them in place until they are ready to harvest.
- Furthermore, development behind the net is eliminated since it does not receive much light in the first place.
Advantages
- If the number of plants allowed is restricted by regulation, this is an excellent method of increasing yields. It takes far less work to water and feed a single plant. Larger buds, which are typically more powerful.
Disadvantages
- Because of the longer growing cycle, there are more harvests every year. Stress training, trimming, and pruning are all required. There is a greater requirement for vertical space, however this may be mitigated by utilizing a technology such as SCROG
- More soil or other material is required, as well as larger pots.
Several Medium to Large Plants
Finally, you have the option of growing to whatever size in between. There truly isn’t a limit to what can be done here. If you’re searching for an average-sized marijuana plant, you can expect it to grow to be about 4 square feet in size, which corresponds to an area of approximately 2 by 2 feet. Ideally, you’ll want to maintain these plants in a 3 or 5 gallon pot and train them to a certain degree. A SCROG grow is a good choice for plants of this size since it maximizes production. Several times over-top the plants to increase the amount of colas while keeping the overall height under control.
At the end of the day, any one of these strategies can be effective, and the choice ultimately comes down to personal preference. Additional considerations should be made while determining the size of your tent and the quantity of plants that will be placed inside of it.
Other Things to Consider
In addition to what we’ve already discussed, make sure you have enough space in the tent to be able to access to every plant and water it or provide whatever other care may be required. When working in bigger tents, this is especially crucial because plants at the back may be difficult to reach. You’ll also want to make sure there’s adequate room for any equipment you might require. This might include grow lights, filters, fans, humidifiers to enhance relative humidity, dehumidifiers to decrease relative humidity, air conditioning or heating, among other things.
- Just make sure that there is enough space in the tent for everything you need to bring with you.
- This term refers to the sucking inward of the tent walls as a result of the negative pressure created by your ventilation system within the tent.
- Keep in mind that tent suck should be taken into consideration while determining how many plants to place in the tent.
- As an alternative, you may take steps to prevent tent suck, such as installing support beams to keep the canvas walls in place and prevent them from sucking inward.
How Many Plants In A Grow Tent: Final Thoughts
The most important message from this is that it is difficult to provide a response to the issue of how many plants can be accommodated in a certain size grow tent. You would need to know the size of the plants before you could proceed. And that is something over which you, as a farmer, have complete command and responsibility. As a result, the first decision you will need to make will be how big you want your plants to grow. That information will allow you to determine how many of them you can put into your grow tent, or how large of a grow tent you will need to be capable of growing any number of plants in one area of your garden.
How Many LED Watts Are Required Per Square Foot of Grow Space?
*This article was last updated in May 2018. Are you a newcomer to the world of LED cultivation? If this is the case, the charts below will assist you in determining how much energy (measured in watts) your plants require to blossom. Disclaimer: Wattage is a legacy of the days of high-intensity discharge (HID) lamps (MH and HPS). The coverage area of a fixture or the utility of an LED grow light should not be determined by the wattage of the fixture or the LED grow light. Using wattage as a simple technique of estimating the optimal fixture size for your grow should be limited to the most basic of situations.
PPFD (and spectrum) are essential components of a good grow when used in conjunction with the appropriate spectrum for your plant type and development phase.
The term “wattage” in this article refers to the amount of electricity that is pulled from the wall, not to the amount of electricity that is drawn from the LEDs, which is normally the product of the maximum LED wattage multiplied by the number of LEDs specified by the manufacturer.
For example, a 900 watt LED grow light would be made up of 300 x 3-watt LEDs. The LED grow light, on the other hand, may only consume 500 watts when connected to the wall.
Grow variables
It is critical to note that the amount of actual watts that you will use for your grow will vary based on the following factors:
- Plants that require a lot of light, such as tomatoes, peppers, and other vegetables
- Plants that require little light, such as herbs and leafy greens (such as basil lettuce)
- There is a significant difference in the quantity of light required by seedlings, vegetative, and blooming plants.
Watts per square foot
For blooming, the typical LED grow lamp consumes around 32 watts to cover 1 square foot. This is in stark contrast to a conventional HID lamp, which consumes 40 watts per square foot (assuming a 5′ x 5′ space or a coverage area of 25 square feet). The use of a HID in a 4′ x 4′ area will increase the power coverage to 62.5 watts per square foot (psf). (The energy savings that growers may expect from employing LED grow lights instead of high-intensity discharge lights is around 38 percent.) This energy savings figure solely includes the savings that farmers realize as a result of utilizing LED lighting fixtures.
For example, depending on the size of the setup and the temperature of the surrounding environment, less ventilation and air conditioning may be employed, or it may be altogether avoided.
More energy-efficient LED grow lights will consume fewer watts to produce the same amount of light that a less energy-efficient LED grow light would provide.
LED Wattage Chart Explanation
The wattages indicated below are based on the assumption that you are blooming your plants. If you’re growing vegetables, you might want to consider reducing your wattage by 50% because vegging plants only require roughly half the amount of light that flowering plants do. As is always the case, following the manufacturer’s advice is the best course of action.
Using the charts
The following columns will be included in each of the charts:
- Plants to be cultivated in a certain area The area covered by a certain number of plants in terms of square footage
- The recommended LED wattage is based on the quantity of plants being grown in the given space.
Wattage charts
For blooming, assume a wattage of around 32 watts per square foot (real LED wattage). Smaller yields may be associated with lower wattage, whereas bigger yields may be associated with higher wattage.
Quick Guide (watts per coverage area)
of Plants | Square Feet | Wattage from Wall |
1 | 1 | 30 to 40 watts |
2 | 2 | 60 to 80 watts |
4 | 4 | 120 to 140 watts |
6 | 6 | 180 to 200 watts |
8 | 8 | 240 to 300 watts |
10 | 10 | 300 to 340 watts |
Recommended wattage assuming 2.0 sq ft/plant
of Plants | Square Feet | Wattage from Wall |
1 | 2 | 60 to 80 watts |
2 | 4 | 120 to 140 watts |
4 | 8 | 240 to 300 watts |
6 | 12 | 360 to 400 watts |
8 | 16 | 500 to 650 watts |
10 | 20 | 600 to 800 watts |
Recommended assuming 4.0 sq ft/plant
of Plants | Square Feet | Wattage from Wall |
1 | 4 | 120 to 140 watts |
2 | 8 | 240 to 300 watts |
4 | 16 | 500 to 650 watts |
6 | 24 | 700 to 860 watts |
8 | 32 | 900 to 1100 watts |
10 | 40 | 1100 to 1400 watts |
Shop LED Grow Lights ›
Related:What is the difference between PAR, PPF, DLI, and Efficacy? It is important to understand the light factors that affect your indoor plants. See what else you should think about before choosing an LED grow light in this article. Please keep in mind that the growing of some plants may or may not be permitted in your individual region or nation, depending on the laws in place. LED Grow Lights Depot does not advocate or condone any unlawful conduct, and we urge each person / user to become familiar with the applicable laws in their own region or nation before engaging in it.
