How Does A Roof Top Tent Mount

Roof Top Tent Mounting Ideas (With Pictures)

Installing a roof top tent may be time-consuming, and it may take you a while to figure out just where you want it to be mounted on your car, trailer, or truck bed, depending on your preference. It was my intention to compile the material I had gathered from numerous pages of forums into a single, easily digestible post rather than wasting hours browsing through them. We’ll go through some of the numerous mounting options for your roof top tent (RTT), as well as the ideal locations to put them!

Where can you mount your roof top tent?

It should come as no surprise to you that the most frequent and straightforward method of installing an RTT is to attach it to the roof of your car. By attaching it to an aftermarket crossbar system as well as a permanent roof rack system, you may accomplish your goal. If you’re in the market for a roof rack, opting for a low-profile design will lessen the amount of wind resistance and fuel loss experienced when operating an RTT. Not only will the rack be positioned closer to the car, but so will the RTT as a whole.

By reducing drag while driving, you can enhance your fuel economy while also providing a much smoother ride for passengers.

If you have a tent that weighs 200 pounds, you will be better off investing in a permanent roof rack system that is capable of supporting that amount of weight.

There are several instances, as well as my own personal advice in it!

Trailer

The next alternative for attaching an RTT is to purchase a trailer, preferably an overlanding trailer, which may be customized to your specifications. CVT overlapping trailers or FSR overlapping trailers are examples of trailers that I would suggest because they come with crossbars for the RTT already installed.

I have listed all of my favorite and must-have roof top tent essentialshereif you’re interested in shopping around!

When an RTT is mounted on a trailer, there are several advantages. First and foremost, it is simple to mount and unmount as necessary. If you want to put it on top of a vehicle’s roof, you don’t have to lift it quite as high. Next, you won’t have to be concerned about losing gas mileage or causing your car to wear out prematurely. Many RTT owners leave it turned on all year, which puts additional strain on the drive train over time. Instead of worrying about the mounting procedure, you may just unhitch the trailer and move on with your life.

Truck options

The last option is intended for commercial vehicles in general. This item may be mounted on your truck’s bed, canopy, or even the cab itself. Each has its own set of advantages and justifications. Personally, I would invest in a truck bed rack so that your RTT may be mounted flush with the cab and not create any more wind resistance. Many individuals, on the other hand, want the truck bed space and choose to get a bed rack that is extremely high in order to be able to carry a large amount of equipment into the truck bed.

With the use of a canopy rack, you may attach an RTT to it.

It is merely a matter of installing two tracks in the appropriate locations so that the roof rack’s towers can hold them in place. There are no complicated steps in the installation, and you may choose between crossbars or a more durable rack such as the Slimline II.

Positioning your roof top tent

The location of your RTT has a significant impact on the overall wear and tear of your vehicle. When putting your RTT on the roof of your car, you should strive to position the tent such that it is directly in the center of the vehicle’s interior. This contributes to the preservation of the normal weight distribution. This is by no means required, because with trucks or particular racks, this isn’t even a viable choice at all. Furthermore, some individuals just like to put the tent closer to the front so they can stow their belongings behind the RTT.

Several factors contribute to why many people prefer this configuration rather than opening it to either the passenger or driving side of the vehicle.

Mounting Systems for your roof top tent

The procedure of installing an RTT can be quite time-consuming. Not only do you require additional assistance, but ratcheting down all of the bolts is also time-consuming. By purchasing a fast release mounting system, you may reduce the setup time to a fraction of what it would otherwise be. For example, the Front Runner Slimline rapid release mechanism is an excellent illustration of this. After installing the clamps, you will never have to use any tools again to mount your RTT since they will be permanently secured in place.

This method is applicable to all RTT kinds.

Reduces the amount of bolt tightening required, and secures your tent to your rack for further security.

Not only will it save you a great deal of time, but they are also extremely safe and contain locking capabilities to protect your information.

Best practices for mounting a roof top tent

When installing an RTT, there are a number of critical parameters to be aware of. When it comes to a properly secured tent, knowing things like the dynamic weight limit and the width between crossbars are critical parameters to know. That’s why I wrote a really brief essay on how to set up a roof top tent in the first place. It’s a really concise and to-the-point tutorial that walks you through the process step by step. Things to know before, during, and after the installation are all covered in this straightforward mounting guide, which includes photographs taken by me.

Wrapping up

The location and method of mounting your RTT might differ significantly. It all comes down to how much convenience you want, how much weight it can handle, how wind resistant it is, and a slew of other considerations. These are by far the most prevalent methods of mounting an RTT, and each has its own set of advantages and disadvantages. There is no one-size-fits-all solution when it comes to determining which mounting method is the finest because it will differ from person to person depending on their own preferences.

If you’ve spent any time browsing through numerous pages of disconnected material, I hope this post has saved you some time. These are the most popular and safest methods of mounting a roof top tent on a house or building.

How do rooftop tents work A complete guide

What are the benefits of purchasing a rooftop tent? There are several advantages to using a rooftop tent, including the following: The thrill of the chase. Rooftop tents provide a unique opportunity to enjoy the great outdoors, no matter what the weather conditions are like. These tents are made to last a long time. They can withstand harsh weather better than ground tents and, unlike RVs, may be utilized in difficult terrain without compromising performance. There’s a view. As a result of rising above the ground, you will have a better perspective of the breathtaking nature that surrounds you and your tent.

  • Simple to assemble.
  • You don’t have to assemble a slew of poles and stake them into the ground, as you would with a ground tent.
  • This means that you’ll be able to spend more time exploring and less time setting up camp.
  • Most roof top tents are equipped with built-in mattresses, which are more comfortable than inflatable beds (particularly if they are deflated!).
  • In addition, the tent’s level floor means that you won’t have to worry about knobby stones poking you in the back at night.
  • These tents keep you up and out of the mud, snow, sand, and creatures that may be lurking about.
  • Most of the time, the materials used to construct rooftop tents are specifically intended to survive extreme weather conditions better than those used to construct ground tents.

The rooftop tent is less expensive than a trailer, camper van, or recreational vehicle (RV), but it is still considered a mobile home because it is moved by automobile.

Additionally, they are capable of handling uneven terrain, making them ideal for off-road expeditions.

Because they are bigger, they are typically less adaptable than rooftop tents in terms of design.

What is the best way to set up a roof top tent?

Various types of rooftop tents are available, each with its own design and installation procedure.

  1. Placing the tent on the roof rack of your vehicle and sliding it into position
  2. The tent should be secured by bolting down the mounting gear that has been provided.

Remember to always refer to the documentation that came with your individual tent if you need more detailed instructions. What is the best way to utilize the rooftop tent? Once you’ve arrived at your location, how do you go about erecting your rooftop tent? There are two types of ground tents available: fold-out and pop-up, both of which are far faster to set up than regular ground tents. Fold-out: Soft-shell roof top tents are the most prevalent type of roof top tent. Simply remove the travel cover from the tent, extend the ladder, and unfold the structure.

  1. Pop-up: Roof top tents with a sturdy shell are the most prevalent type.
  2. That is all there is to it!
  3. A number of people who are interested in roof top tents have inquired about this specific subject.
  4. When setting up the tent, it can take anything from 4-6 minutes to open the tent, set up the windows, and attach the rainfly poles.
  5. Where can you set up a roof top tent for camping?
  6. Camping may be permitted in specified parking spaces, campgrounds, national parks, and other locations.
  7. Apps such as iOverlander and Allstays can assist you in locating camping spots in your region that are permitted.

As soon as you’ve worked out how to utilize a rooftop tent, the next logical inquiry is: which rooftop tent is the most appropriate for me?

Hard shell versus soft shell roof top tents are two different types of roof top tents.

It is for this reason that they are even more convenient to set up and take down than soft shell roof top tents.

All of these qualities contribute to their popularity as overlanding and off-roading vehicles.

Tents with a soft shell for the roof: Tents with a soft shell are the most frequent form.

To open it, all you have to do is pull the ladder down and the tent will unfold.

Additionally, soft-shell tents can be equipped with an annex, which provides additional room beneath the tent.

For the benefit of families The largest roof top tents typically have a maximum weight capacity of roughly 650 lbs.

A roof top tent annex also provides you with more space for getting the kids ready in the morning, or even a separate sleeping area for the kids to sleep in.

Weekends and short getaways are ideal.

A tent like theThule Tepui Foothillfrees up room on the top of your car, making it more convenient to travel.

For those who like to take risks.

TheThule Tepui Ruggedizedseries is designed to withstand the test of time.

A tent like this is ideal for towing a 4X4 trailer or off-roading with a rig.

Hard-shell rooftop tents are also suitable for use on the beds of pickup trucks and jeeps. Because of the hardness of the material, they are particularly resistant to rain and wind. Accessories and features for a roof top tent

  • What is the best way to heat a roof top tent? Make use of aquilted insulator, which is a rooftop tent insulation that is fitted to your tent and attaches to the inside frame for additional protection from the elements. Because its material is thicker than that of ground tents, vehicle top tents are often warmer than ground tents. Not to mention the additional benefit of being elevated above the freezing ground
  • What is the benefit of using a roof top tent with an annex? Some roof top tents are equipped with an annex that may be detached. This provides you with more protected room to get dressed before heading out on an adventure or additional storage space for your things. Bedding: One of the advantages of a roof top tent is the fitted mattress that helps you to get a good night’s sleep after a long day of exploring. The mattress is already set up in the tent, so all you have to do is open the tent and get in. It is important to use an anti-condensation mat while setting up a tent since it will prevent the interior from becoming musty and wet. Outside your tent, hang a boot bag to collect your muddy shoes in order to keep the interior of your tent as clean and dry as possible (a difficult task while camping).
See also:  Diagram Of How To Pitch The North Face Ve 25 3 Person Tent

What is the best way to determine whether a roof top tent will fit your vehicle? As a result, we understand how critical it is to ensure that your rooftop tent is secure and safe. That is why it is critical that your tent be suitably sized for your vehicle. When determining whether or not a tent will fit in your vehicle, there are several factors to consider. Capacity for carrying a lot of weight

  • The dynamic weight capacity of your vehicle is the amount of weight it can handle while driving. This is the maximum weight capacity that has been specified by the vehicle manufacturer for your vehicle. To put it simply, it is the weight capacity required to support your rooftop tent. However, when your car is parked, your tent is set up, and a ladder is added, its static weight capacity measures how much weight it can support at that point. Because of the additional support provided by the ladder, the static weight capacity is typically three times greater than the dynamic weight capacity. This tells you how much weight is required to support the tent and the people sleeping inside it.

Requirement for travel distance

  • Aluminum bars are located at the bottom of the tent, which are used to secure the tent to the roof of your car. You can’t have bars that are too wide for your vehicle. Please double-check the suggested distance needed in the tent’s handbook to ensure that it is compatible with your specific vehicle, or use our instructions to calculate it for you.

Roof Rack Compatibility

  • You will want to get an aftermarket roof rack since they have a larger weight capability than the majority of factory fitted roof racks that come with your vehicle. In order to support the tent’s dynamic weight, your rack must be capable of supporting it. Roof top tents are compatible with the majority of Thule roof racks. It is possible to determine whether or not your rack will work with our rooftop tents by consulting our buyer’s guide.
  • Roof top tents are compatible with all roof types, with the exception of bare roofs that lack tracks or rails (as illustrated below). It is perfectly OK to drive in a car with a sunroof, but not with a glass roof

(From left to right, the following roof types: fixed-point, elevated railing, rain gutters, flush railing, and tracks.) Make the procedure easier by following our fit guide! All of the math are done for you, so you don’t have to. Simply enter your car’s make, model, and year of production into our directory, and we’ll recommend some of our rooftop tents that are compatible with your vehicle. Do you require a roof rack in order to use a roof top tent? Yes! Rooftop tents are mounted to the vehicle’s rack system, which might be a truck, an SUV, or a van.

  • Yes!
  • Mounting your roof top tent on truck and van racks that are designed to accommodate pickup trucks or truck beds is a simple and effective solution.
  • What about boats or bicycles, for example?
  • Some roof top tents provide enough space for you to additionally transport a kayak, canoe, or bicycle on the side of the tent.
  • Just make sure that the weight capacity of your roof rack and vehicle is adequate for the task at hand.

How to Mount a Rooftop Tent to your Campervan

Having a rooftop tent on your campervan is a smart way to maximize available space. As an alternative to upgrading your campervan and installing a bedroom inside, you might opt to have it on top of it; after all, what else would you put on top of your campervan?

What to consider before buying a rooftop tent?

Before purchasing a rooftop tent, you must determine whether or not your car or van is capable of supporting the weight of the rooftop tent by examining your vehicle’s overall load limit and the weight of the tent. You will see that your vehicle is carrying both a dynamic and a static burden on it. A dynamic load is when your car is moving, and static is when your vehicle is motionless. The difference is significant because, when the automobile is moving, the braking and accelerating power have a significant influence on the weight carried by the vehicle.

When you have determined the maximum rooftop load, you can begin looking at the various rooftop tent models available.

Hard-shell vs. Soft-shell rooftop tents:

The term “hard-shell rooftop tent” refers to the sturdy shell that protects the tent from the elements. Aerodynamics of the hard shell will also result in less mileage waste than the other variants due to its lower drag coefficient. You will also be able to build up this model in a very short and simple amount of time! The soft-shell roofs, in contrast to the hard-shell rooftops, are a little more blocky when you’re transporting the tent, which has a greater impact on gas consumption than the hard-shell rooftops.

The fact that it is larger is a significant advantage for the delicate shell!

There are many different brands and kinds of hard shell and soft shell roof top tents to select from, and you can choose one that suits your needs.

We also have a model with the hard-shelltent on our jeeps, which is available for purchase. Having selected the rooftop tent that best suits your vehicle and your requirements, the next step will be to install it on your campervan or automobile!

How to mount a rooftop tent on your vehicle

Rather than being particular to your rooftop tent, this simple step-by-step guide on mounting a rooftop tent on your car is intended to provide you an overview of the process so you can understand what it takes to set it up! 1.Equipment: First and foremost, preparedness is essential! Make certain that you have all of the equipment essential for your specific model, including wrenches, screwdrivers, and other tools, before you begin. Have one or two extra pairs of hands available to assist you in lifting the rooftop tent onto your car.

  • 2.Roof rack: This is a vital step, since you must have a roof rack installed on your vehicle.
  • Open the tent first, then open your box: Now that you have your rooftop tent, you’ll want to open your box first, and then open the tent.
  • After you’ve finished removing everything, you can re-close the tent.
  • 5.Locate your rooftop tent on top of your vehicle: Load your rooftop tent onto the roof of your vehicle, along with the extra pair of hands you had previously booked.
  • 6.Connect the crossbars to the frame.
  • 7.Tighten a couple of bolts.
  • Have a great day!
Travelling with a rooftop tent:

With your newfound knowledge about hardshell and softshell rooftop tents, as well as how to set up a rooftop tent, you may wonder why not everyone has one, given how amazing they are. The truth is that a rooftop tent is not for everyone, as is the case with many other things. Others are concerned that when traveling to beautiful locations, you may not have access to basic services such as restrooms and showers, which some people find objectionable. In addition, it may be rather dark at night.

If none of these factors worry you, a roof top tent could be the best buy you’ve ever made for yourself.

It may be inconvenient to have to set up the tent on a regular basis, but you are not required to do it every day.

Interested in experiencing a rooftop tent trip before making the investment? You may hire a camping car equipped with a rooftop tent through our website. With a roof top tent, you can see where you want to go and how long you want to stay there.

About the Autor

Daniel enjoys going on expeditions and exploring new places. He enjoys interacting with individuals and learning about their lives via their tales. “While traveling, you may gain first-hand knowledge and information from professionals,” Daniel explains. He bases every one of his messages on a distinct point of view that he encountered along the way.

iKamper – The All-You-Need-To-Know Roof Top Tent Guide

The date is October 21, 2020. Numerous campers and overlanders are already aware with the iKamper roof top tents, which are well-known for their creative designs and functionality. But how does one go about getting a roof top tent up and running, and how do they function? If you are thinking about purchasing a roof top tent for your outdoor excursions, there are a few things you should consider before making your purchase. This tutorial will assist you in learning the fundamentals of roof top tents, such as vehicle requirements, installing a roof top tent, opening and shutting a roof top tent, the advantages and disadvantages of roof top tents, and helpful accessories.

  • Roof top tents are mounted to your car using crossbars or a roof rack, and it’s critical that these bars and racks be capable of supporting the weight of the tent and the contents inside it.
  • iKamper owners opt for aftermarket crossbars or roof racks, such as those manufactured by Front Runner, Thule, or Rhino Rack, which are significantly stronger and can support significantly more weight.
  • When you talk about dynamic weight, you’re talking about the weight that your vehicle can hold while it is moving.
  • Even though the Skycamp 2.0 weighs 160 lbs (73 kg), it has a dynamic weight load requirement of 165 lbs (75 kg), which takes into account the mounting brackets and any locking mechanisms.
  • As a result, the static weight limit of your vehicle is substantially larger than its dynamic weight limit, owing to the weight being more uniformly distributed over the vehicle’s whole structure.
  • Along with weight restrictions, the crossbars must be at least 30 inches in length “In order to uniformly support the weight of a roof top tent and its inhabitants, the beams must be spaced 76 cm away from one another.
  • The revised High Comfort Ladder from iKamper includes angled steps for a more pleasant experience, and it is capable of supporting up to 330 lbs / 150 kg of weight.

Please keep in mind that certain roof racks have higher outer perimeter rails, which might make it difficult to properly attach a roof top tent.

When it comes to installation, iKamper employs the newMounting Brackets, which are included with the purchase of every tent.

You only need to push the hardshell a small amount after it has been unlocked; the gas struts will take care of the rest, raising the tent to its full height.

Only the tension poles for supporting the tent’s fabric need to be installed, and you’ll be finished with your project!

Instead of a hardshell with latches, the X-Cover includes a zipper that can be opened and closed.

In a manner similar to how hardshell roof top tents are opened, you may use the ladder to expand the panel by stepping on it.

ROOF TOP TENT CLOSURE INSTRUCTIONS The iKamper hardshell roof top tents close in the same amount of time as they open.

The next step is to fasten and lock the hardshell latches, after which the operation is complete.

It’s important to tuck the canvas inside the cover so that you can zip it all the way up.

This is demonstrated in the video below: You may learn more about setting up a roof top tent as well as how to open and close it by visiting this link.

What do you think about going camping alone, with a friend, or with your whole family?

See also:  Tent Guy Line How To

The Skycamp 2X and the Skycamp Mini are excellent choices for campers traveling alone or in couples.

Despite the fact that it performs similarly to classic clamshell roof top tents, the Skycamp 2X offers significantly greater storage space when its hardshell is closed.

1.8 inch (4.5 cm) thick foam mattress for the Skycamp 2X is 51 by 77.5 inches (129 by 197 cm), while the Skycamp Mini’s 1.6 inch (4.5 cm) thick foam mattress measures 80.7 by 50.4″ (205 by 128 cm).

Both of these variants have a higher capacity, allowing them to seat three adults or two adults and two children respectively.

Neither of these tents has a king-size mattress, but both have foam mattresses that are roughly equivalent to one.

HOW DO I MAKE MY SELECTION FOR A ROOF TOP TENT?

Are you seeking for a tent that can be set up and taken down in minutes?

What if you’re going camping with a group of individuals who will all be sleeping in the same tent as you?

When the tent is closed, do you want to have a place to put your bedding within the tent?

Hardshell roof top tents are the quickest to set up and take down of any roof top tent on the market.

Soft shell roof top tents, like conventional ground tents, require more time to put up and take down than hard shell roof top tents.

Soft shell roof top tents are not available from this company.

This is especially crucial when organizing camping vacations with other people, especially if they aren’t providing their own tents.

If you are camping alone or with only one other person, the Skycamp 2X and Skycamp Mini are the best options because they are designed to accommodate two people.

Tents with lower footprints are required in these situations, and the Skycamp Mini’s compact footprint is the ideal option for this.

It is the best option for your requirements.

THE ACCESSORIES FOR ROOF TOP TENTSFor campers who are wanting to enhance their roof top tents and achieve an even more pleasant camping experience, iKamper provides a wide range of handy accessories for purchase.

There are additional devices that provide security, like as mounting bracketlocks, that prevent anyone from tampering with your tent when it is unattended while you are away from home.

All of these iKamper accessories, as well as many more, may be found on this website.

We hope you have found this post to be useful and instructive. Our customer service team is here to answer any queries you may have. Please let us know how we can be of assistance. Contact us at [email protected], and have a look at theiKamper Community for further information.

Do I Need a Roof Rack for a Roof Top Tent?

The popularity of roof top tents (RTTs) has skyrocketed in recent years, mostly because they allow you to camp anywhere your car can go while being warm and safe above the ground. But you can’t just buy an RTT and put it on the roof of your car and hope for the best – there are a number of factors to consider, including the sort of vehicle that is most suited for an RTT and the style of roof rack that will safely support your tent. So, do you require a roof rack in order to use a roof top tent?

Aftermarket cross bars put on OEM roof rails are a simple solution, but a heavy-duty, permanently fitted custom rack is a more complicated solution.

What Kind of Roof Rack Do You Need For a Roof Top Tent?

The most important criteria for a roof rack is that it has a Dynamic Weight Capacity (DWC) that is equal to or more than the weight of the tent. A vehicle’s DWC is a measure of how much weight the rack can physically hold while the vehicle is in motion without causing damage to either the rack or the roof of the vehicle in question. Consequently, it’s typically advisable to purchase your RTT first so that you know exactly how much it weighs, and then choose a roof rack that can support at least that weight plus the weight of anything more that you want to add to the tent before purchasing your roof rack (solar panels, storage boxes, etc.).

To verify that your roof rack is sturdy enough to support your tent, add up the weight of the tent, the weight of you and anybody else will be sleeping in the tent, and the weight of any items that you plan to have in or on the tent.

Aside from that, you have entire control over the elements and design of the rack.

Depending on your needs, there are racks that are readily detachable and do not require any drilling into your car, and racks that are intended to be more permanent and are more difficult and impractical to remove on a frequent basis.

5 Popular Roof Racks for Roof Top Tents

It is important to note that there are several variations in the types, sizes, and weights of RTTs (which typically range from 100 to 200 pounds), which means that not every roof rack will be suitable for your exact tent and car. Nonetheless, there are several rack kinds that are really popular, and we’ll discuss five of the most common possibilities in the section below.

1. Yakima SkyLine System

(Photo courtesy of yakima.com) Website:yakima.com Starting at $486, this product is a good value. Vehicle-specific landing pads and a range of cross bar choices are included with the Yakima SkyLine System, which is intended for cars with fixed points or tracks on their roofs, among other features. With the provided tool, this is one of the most straightforward roof rack systems to use and install. Due to its maximum load rating of 135 pounds, it is an excellent choice for those who have lesser RTTs.

Yakima also provides a locking system that can be purchased separately so that you may leave your rack on your car in any scenario with confidence.

It will be less secure, however, because it is a cross bar kit rather than a permanently fitted roof rack system, because of the nature of the product. For those who only use their RTT sometimes and do not wish to have a permanent rack installed on their car, this might be a fantastic solution.

2. Thule TracRac SR System

(Photo courtesy of thule.com) Website:thule.com Price ranges from $1,099.90 to $1,099.90. Many people prefer to mount RTTs on a truck bed rack, leaving the space underneath free to store gear. The Thule TracRac SR System allows you to do just that. It has a rapid installation process that does not involve drilling into the vehicle, allowing the adjustable racks to be readily removed or modified to carry other items in addition to an RTT if needed, if desired. This rack has a weight capacity of 1,250 pounds, making it more than capable of transporting whatever RTT you choose, as well as a variety of other items.

Additionally, this rack may be utilized for a variety of other purposes in addition to transporting your RTT, making it a perfect dual-purpose rack if you use your truck for business purposes.

3. Front Runner Outfitters Slimline II Roof Rack

(Image courtesy of frontrunneroutfitters.com) Website:frontrunneroutfitters.com Price ranges from $1,465 to $2,465 There are several various models of Slimline II Roof Rack available for a variety of different cars, and it is one of the most popular permanently fitted roof racks on the market. Installing it on the Toyota 4Runner is simple, as it uses eight factory mounting points, however drilling is necessary to secure the foot rails in place. Front Runner Outfitters has set the SWC as 660 pounds, despite the fact that they do not supply a DWC, citing the fact that there are other elements at play, such as load location, road conditions, and so on.

This rack is equipped with a wind deflector to provide a peaceful ride, as well as a set of foot rails to make installation simple.

It does, however, give enough clearance to permit 4Runners with sunroofs, if necessary.

Lastly, all Front Runner racks come with an industry-leading lifetime guarantee, which gives you piece of mind while making such a significant purchase.

4. Gobi Stealth Rack

(Photo courtesy of gobiracks.com) Website:gobiracks.com Price ranges from $1,595 to $2,495 Another extremely popular alternative for transporting an RTT is the Stealth Rack from Gobi. Each piece is finished in a black powder coating with an anti-rust base layer. It has a DWC of 300 pounds and a SWC of 800 pounds, and it weighs a total of 300 pounds. A rear ladder is also included for convenient access, and neither the ladder nor the rack require drilling into your car. This rack is available in two configurations: with a sunroof (which has an open space so you can clearly see out) and without a skylight (which has a greater rack surface area).

They are totally welded together, and the only screws used are to attach the rack to the vehicle’s existing mounting points, which are concealed by the welded construction.

With its sturdy structure, you can walk on it without worrying about it bending, and the basket design makes it ideal for hauling both RTTs and other items. It also works with Yakima and Thule attachments, as well as Gobi’s own range of attachments, which is a helpful feature.

5. Rhino-Rack Pioneer SX Platform

(Photo courtesy of rhinorack.com) Website:rhinorack.com Starts at $1,147 (plus applicable taxes). This Rhino-Rack platform has a maximum weight restriction of 175 pounds, making it ideal for all but the heaviest of RTTs, according to the manufacturer. In addition, it is equipped with four highly sturdy slats that make it simple to secure gear or attach your RTT to it. The platform is constructed of lightweight reinforced nylon and aluminum that will not rust when exposed to the weather. Because of its flat form, you can simply slip your RTT onto it or place other equipment onto it.

In order to reduce wind drag and noise when driving, the platform is equipped with bars that are included in the purchase price.

Q A With Roof Top Tent Owner Tiffany

During my conversation with Tiffany (@4xploration) regarding her roof rack configuration for her RTT, she shared the following information: For your RTT, what kind of rooftop storage do you have available? “I have Gobi’s Ranger rack on my back.” Apart from the standard rack, this is the only rack that I’ve ever had.” (Photo courtesy of @4xploration) What factors went into your decision? “We chose Gobi because we like the basket design over the flat slats, which we did not like. “We chose the Ranger over the Stealth since the basket is larger,” says the author.

  1. We also purchased the larger basket because we remove our RTT when we arrive at our destination.
  2. The only disadvantage is that it significantly enhances our public profile.
  3. (Photo courtesy of @4xploration) A 2016 Toyota 4Runner with the CVTMt Shasta extended RTT is available for purchase.
  4. Consider the maximum height of your car, both with and without the roof top tent, as well as if the tent will be left on the truck or will be taken off.
  5. One thing to keep in mind is that racks have a rather significant wait time, with Gobi having the largest lead time because they are created to order.” (Featured image at the top of the post courtesy of @4xploration.) Roof Top Tents: What is the CHEAPEST HARD SHELL Roof Top Tent?

Next up in the Roof Top Tents series: (5 Budget-Friendly Picks) Roof Top Tents at the Lowest Prices? (8 Favorite Budget-Friendly Options) What is the largest roof top tent that has ever been built? Which are the best hard shell roof top tents? (10 People’s Favorite Songs)

Three Rack Systems for a Rooftop Tent

If you’re the adventurous kind that constantly has one eye on the horizon for your next opportunity to hit the road for a cross-country road trip to explore the breathtaking American countryside, chances are you’ve thought about investing in a rooftop tent. No matter where you are, these tents will provide a comfortable place to sleep. It is possible to place a rooftop tent on virtually any vehicle. Do you want to take your Subaru Legacy on a road trip into the wilderness? Take a chance. Simply ensure that the rack arrangement you chose is capable of supporting the weight of the load.

See also:  How To Stay Warm In A Tent Hammock

Why a rooftop tent?

It’s likely that you’ve thought of purchasing a rooftop tent if you’re the adventurous sort who is always thinking about your next opportunity to hit the road for a cross-country road trip to explore the breathtaking American countryside. Whatever your location, these tents provide an excellent place to sleep. It is possible to place a rooftop tent on almost any vehicle. Do you want to take your Subaru Legacy on a road trip into the wilderness? Take a chance and try it out! Choose a rack system that is capable of supporting the weight you intend to use it for.

Choosing a rack system

Certain variables must be considered while selecting the best roof rack system for your car in order to accommodate your roof-top fantasies. The maximum Dynamic Weight Capacity, or DWC, of the rack system is most likely the most critical component to consider. This informs you how much weight the rack is capable of supporting when the vehicle is moving forward. A rooftop tent can weigh anywhere from 95 to over 200 pounds, so when you pick your rack, make sure you know how much yourtentweighs.

As a result, practically any sedan, SUV, or pickup truck can withstand the weight of a rooftop tent and its passengers since the weight of the tent and its occupants will be uniformly distributed across the car’s whole chassis.

Rack systems

When it comes to selecting a rack for your rooftop tent, there are three main alternatives to consider. Roof racks with crossbars, a bed rack, and a complete roof rack like the one shown in the video below are the three basic possibilities. In order to pick amongst these three rack systems for your car, you’ll first need to decide which one is the best fit for you and your situation. The following attributes are allowed: ” src=” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture; picture-in-picture; picture-in-picture;” allowfullscreen=””> An outdoor roof rack, such as this one from Front Runner Outfitters, is the ideal option if you want to put your tent up on the roof for the most of the time — and maybe forever.

  • Roof racks such as this attach to the car’s existing factory mounting points or clip on to minimize the need for drilling or other modifications to the vehicle.
  • As a result of the fact that many of these solutions are clip-on, they aren’t nearly as solid and dependable as a more permanent rack configuration.
  • You should use one of these if you believe your rig is more of a seasonal item and you expect to be away from it for an extended period of time.
  • Bed racks are particularly built for pickup trucks, such as the popular Toyota Tacoma, and other similar vehicles.

This sort of rack system allows you to put a tent over the bed of your vehicle with relative ease. If you own a pickup truck, you may determine that this is the best option for your situation.

Do your research

If you had to go back and do it all over again, don’t bother. While you’re bound to discover things you want to change as you go, it’s wise to conduct your homework ahead of time and select a rack system that will suit your tent. It is also critical that the rack system be correctly aligned with your vehicle’s frame. These three rack systems should serve as a solid starting point for your investigation.

What kind of roof racks do you need for a roof top tent?

There are no comments / Roof racks are now available in a variety of designs and sizes. When it comes to roof top tents, we get a lot of questions, and one of the most frequently asked is “what kind of roof racks do you need for a roof top tent?” It’s not difficult to understand why people are drawn to the notion of roof top tents: they provide adventure, pleasure, independence, nature, comfort, and ease. great! However, there are several practical considerations to bear in mind. Roof racks are a great addition to any home.

  • Square bars are less difficult to deal with than whisp bars, which are oval in shape. Square bars have a narrower width than round bars, and most mounting plates that come with a tent will accommodate them. You may need to hunt for a replacement to the ones that were provided because they are broader and not all plates will be suited for them. OurOrson roof top tents are equipped with mounting plates that can be used with bars ranging in width from 4cm to 8cm in width, which should accommodate the majority of racks on the market.
  • To work with, you’ll need a straight bar that’s around 86cm wide and free of obstructions. To attach Orson roof top tents, the mounting tracks beneath the tent are around 80cm apart, and you will require clear bar to bolt them into – no plastic mounting fittings underneath, and no bends in the racks that will interfere with the plates that will clamp onto the roof racks. Roof racks with weight ratings should be avoided. Because a roof tent normally weighs more than 60kg, it is recommended to choose racks that have a load rating of at least 75kg, and preferably 100kg or more. These ratings are for dynamic weights, which are weights that change as a vehicle moves in order to cope with braking and turning. The static weight on the racks is significantly more than the dynamic rating
  • As a result, Try to get racks that will allow for a decent amount of space between the roof and the racks. To tighten or loosen the bolts, you’ll need to get your hands into the space. Things will be easier if there is more space and greater access. In order to use your roof top tent ladder and annex, you must ensure that the height from ground level to the top of the roof racks is within reach of the ladder and annex you desire. The majority of ladders are approximately 2m in height, and annexes can accommodate a set up that is around 2m in height or an XL set up that is around 2.2m in height. If your roof racks are mounted at 2.4m above the ground, something has to give
  • Consult with a roof rack vendor for guidance. In order to identify racks that are suited for your model car and compatible with mounting a roof top tent on top, they will consult their computer database for assistance. Most cars can accommodate a set of racks (as well as a tent), but you should get professional guidance and double-check the weight capacity of your vehicle’s roof with the manufacturer beforehand.

Alternatives are available.

  • Truck bed frames and racks – some guys are putting together racks and frames to go over the ute trays to use as tent platforms. In the near future, we plan to have a frame that can be installed on ute backs. Rooftop baskets – make sure the bars are strong enough to support the weight of the tent, as they weren’t designed to support the weight of a tent. Also, make sure that the roof top tent ladder is long enough to accommodate the additional height that the baskets bring to the set-up. Roof top platforms – in most cases, these will work fine, but depending on the width and direction of the slats used, it may be necessary to exert some effort in order to ensure that the roof tent can be secured properly. Trailers – some people are erecting their roof tents on the back of a trailer. In addition to the gear beneath, the roof tent structure and bars are used to transport kayaks and other items using removable H bars over the packed tent. In addition to adding a big living area to your upstairs bedroom, automobile awnings are an attractive and simple method to do it. A roof rack that is capable of supporting both a tent and an awning could be something to consider.

Sorted! Yeah, but nah? If you have any further queries for which we can provide answers, please contact us at 0210405991.

Quick Release Tent Mount Kit – by Front Runner

The shop will not function properly if cookies are deactivated on your computer or device. $213.00 (includes tax, but excludes shipping) SHIPPING IS COMPLIMENTARY On purchases of $250 or more*In stock Do you have a small garage with limited clearance? For whatever reason, you may prefer not to have the tent on your car at all times. Front Runner’s Quick Release Tent Attach Kit allows you to quickly and easily mount or remove your tent without the need of any tools. The four lockable latches provide you with additional security and peace of mind.

  • Equipment and guidance that has been tested and proven You may put your faith in us. Money refund guarantee for 30 days Guarantee
  • Off-road construction was used. Tough
  • Using these brackets, you will not need any tools to remove or reinstall a roof top tent after it is mounted on a Front Runner Rack. Simply push the tent away from the ground by releasing the tabs on the four locks
  • It will be gone in seconds. No more wrangling in cramped quarters during the “off-season,” or the time-consuming removal of a roof top tent during the workday
  • This sturdy and rattle-free mounting system is designed for use with Front Runner Racks and is built to withstand harsh off-road conditions. It is compatible with theRoof Top Tentas well as other famous soft shell tent manufacturers such as TJM, ARB, Tepui, and others*. This product is compatible with hard shell tents from manufacturers such as Autohome/Maggionlina and James Baroud*. Please read the **IMPORTANT NOTE below if you possess a hard shell tent. A Front Runner Rack is fastened to four low profile base brackets, and four self-aligning bushes are fixed to the tent foundation channels with the help of the provided plates. It is held in place by four latches that include safety catches. It is possible to secure the rack using a Rack Accessory Lock or a Small Combination Cable Lock. The height required to clear the edge of the Front Runner Rack will be determined by the size and design of the tent being used. The brackets are compact and inconspicuous, and they may be left on the roof rack when the tent is not in use, freeing up a significant amount of rack space. There is no need to modify the tent. Tents that have been removed from the ground can be stored on the ground, lifted slightly off the ground by the steel bushes that have been provided. All necessary mounting hardware is included in the package. Instructions for installation are supplied. James Baroud is a writer who lives in New York City. Tent Channel Setor with Quick Release Autohome Tent Channels with a Quick Release System Other tent brands may necessitate the purchase of additional accessories (which are offered separately).

Additional Nut Plates, which are available separately, may be required for Soft Shell and Hard Shell Tents. IMPORTANT NOTE: Hard-shell tents require additional support to be effective. These brackets are designed to be used in conjunction with hard shell tents, such as those made by James Baroud or Autohome, when it is not possible to position the tent so that it rests directly on the rack or on the edges of the rack side profiles. Hard Shell Tent Support Channels are recommended in this situation.

Please keep in mind that additional mounting brackets may be necessary for some tent and rack combinations that require more support.

Product Size (per bracket): 131mm (per bracket when constructed) (5.2″) 142mm L x 142mm W (5.6″) 60mm W x 60mm H (2.4″) L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L (Per Assembled Bracket) Weight: 3.3 kg (7.3lbs)

In order to access the fitting instructions, you must have Adobe Acrobat Reader installed.

Leave a Comment

Your email address will not be published. Required fields are marked *