Quick Answer: How Big Is A Tent Platform
In most cases, a tent pad is around 10 feet by 12 feet in size. This size provides you with enough space to accommodate two tiny tents or one large family-sized tent comfortably.
How big is a tent pad?
A tent pad is typically 10 feet by 12 feet in size, with a few variations. It provides adequate space for two small tents or one large family-sized tent to be pitched in this size.
How much does it cost to build a tent platform?
Materials might cost anywhere from $2,000 to $5,000, depending on the size of your platform, the quality of the wood, and the location of your platform. The cost of labor will also vary based on a variety of circumstances, but it is likely to be between $1,500 and $3,000 per hour.
Is running a campground profitable?
Owning a campsite is not only financially lucrative, but it is also a really satisfying experience. While you will be busy, you will have the opportunity to be your own boss. The fact that campsites, RV parks, and resorts are all cash-based companies is another significant advantage. Make sure you give yourself enough of time as you study how to operate a campsite or resort.
How many acres do you need for a campground?
Generally speaking, one acre should have a total of ten spots on it. Some towns may restrict the number of locations to between 10-15 in total. Many permit requirements include the minimum width and length of each site, as well as the maximum width and length. When deciding how many sites to build, keep in mind that bigger RVs and fifth wheels will be present.
Can a tent be too big?
There is no such thing as a tent that is too large to accommodate everyone. There are only a few tents available, and they are all very tiny.
How big is the average campsite?
The standard tent camping spot is around 12-feet by 30-feet in size for car parking, with a camp pad to the side of 20-feet by 20-feet, but it can be smaller if necessary. The space here is large enough to accommodate a car, a tent, a table, and a grill and/or a fire pit.
How do you raise a tent off the ground?
When it comes to providing insulation between your tent and the ground, a ground tarp is one of the most effective tools you can employ. The use of an under-tent tarp can assist to guarantee that any extra moisture caused by unfavorable weather conditions does not entirely spoil your trip or seep into your tent and harm your belongings.
How much does a 40 foot yurt cost?
When it comes to providing insulation between your tent and the ground, a ground tarp is one of the most effective tools you can utilize. The use of an under-tent tarp can assist to guarantee that any extra moisture caused by unfavorable weather conditions does not entirely ruin your trip or seep into your tent and disrupt your sleeping arrangements.
Is a yurt a good investment?
Yurt vacations are popular all around the world, and people look forward to them. Another advantage is that they may be wonderful investments in the long run. Yurts are long-lasting, reasonably priced, and easily rented. When utilized as holiday rentals, they can quickly recoup their initial investment.
What is platform tent?
In the context of tenting, a tent platform is a floor that may be used to set up one or more tents.
Typically, it is a wooden platform located near a hiking route that gives hikers with a clean and level spot to sleep throughout their journey. The campers may also be discouraged from trampling on the surrounding plants. Tent platforms are available at several campgrounds.
Should I get a big tent?
What size tent should you use? If you aren’t going on backpacking or canoe camping, the size and weight of your tent aren’t important as long as it fits in your vehicle’s trunk or trunk compartment. You’ll find that a 4-person tent is more comfortable for two people, and you’ll have more space to stretch out and store your belongings.
How many tents can you fit on a tent pad?
Tent pads that are more than 15 feet on each side are considered big. These pads can accommodate family tents with a sleeping capacity of 12 to 14 people, which is pretty much the maximum size and sleeping capacity for a family tent. If necessary, this size may be utilized to set up two small to medium-sized family tents on the ground. Large tent cushions are typically rectangular in shape.
Can you put a tent on a deck?
It’s possible to host a successful event in your home under a tent on your deck! The fact that it’s often attached to your home means that you won’t have to travel far in order to use it as an extra room when you need one. You may utilize the space as a beverage station, a lounge area, or a method to show off a spectacular view that your guests would not otherwise have the opportunity to enjoy.
What is the largest size RV allowed in national parks?
RVs up to 19 feet in length can be accommodated in nearly all National Park campsites (98 percent). If your RV is up to 25 feet in length, you will still have a great variety of alternatives because more than 90 percent of parks allow RVs up to that length. RVs with a maximum length of 27 feet will typically be permitted in national parks on average.
How do you level a tent?
How to Set Up a Tent on Uneven Ground It is preferable to pitch your tent perpendicular to the slope, with one side of the tent being lower than the other side. Fold your clothing and place them under your sleeping pad on the downward side of the mountain. In contrast to an arched stance, this will result in a flat trough that is more pleasant to sit in.
Can you build a yurt without planning permission?
It goes without saying that you cannot simply build a yurt anywhere; you will need the approval of the landowner, and you may also need to seek for planning permission in some cases. Consider where you want to put your yurt in terms of wind, rain, and potential floods before you make your final decision.
Can you put two tents on campsite?
Tents: The tent sites can normally accommodate a number of medium-sized tents, such as: Two four-person tents or four two-person tents are available. People: Each site can accommodate up to 8 people of any age, and each site has its own bathroom. Vehicles: Despite the fact that your site can accommodate three vehicles, your reservation only covers one vehicle. Extra cars will be required to pay use fees upon arrival.
Is a 4-person tent too big?
The majority of tiny tents are just too small to be suitable for family tent camping excursions. A 4-person tent, on the other hand, is perfect for a couple. Small tent pads are not often seen in most campgrounds since they are not large enough, although they can be found at walk-in or dispersed campsites in wilderness regions.
Can you fit two tents on a tent pad?
The majority of wilderness tent cushions are not very large.
Two one-person tents may be able to be placed immediately next to each other, if you have extremely small tents (one-person ones).
Do KOA tent sites have electricity?
Premium Tent Sites featuring big, well-defined, and comfortable places for your tent, as well as enough parking and your own power hookups for convenient recharging, are now available at KOA Journey, KOA Holiday, and KOA Resort Campgrounds.
0623-2801-MTDC: Accessibility Guidebook for Outdoor Recreation and Trails
The Forest Service Outdoor Recreation Accessibility Guidelines for Trails and Outdoor Recreation Guidebook is available for download (Continued)
Constructed Features for Campgrounds(Continued)
At least 20 percent of the total number of tent pads or tent platforms provided in a recreation site must meet the requirements below and be connected to the other major constructed features at the recreation area by anORAR. A minimum 48-inch (1,220-millimeter)clear floororground spacemust be provided on all sides of the tent on tent pads and platforms that are required to be accessible. An exception permits this width to be reduced to a minimum of 36 inches (915 millimeters) where a condition for departure exists.
- There is no minimum tent pad size because the types of tents commonly used in recreation sites and inGFAsvary widely in different parts of the country and even in different parts of a single district.
- Large family tents may be common at a more developed campground with numerous constructed features for campers.
- Adding the 48-inch (1,220-millimeter) or 36-inch (915-millimeter) clear space to the size of a typical tent will determine the minimum size of tent pads and platforms for that campground.
- In GFAs, 5 percent of the total number of tent pads or platforms must meet the requirements below, but connection to an ORAR isn’t required.
- For instance, it isn’t unusual to find six or seven tents close together in a GFA.
- An accessible pad for the same size tent with a 4-foot (1.2-meter) clear space all around would need to be at least 13 by 16 feet (4 by 4.8 meters) (4 by 4.8 meters).
- Theslope of an accessible tent pad or platformcan’t exceed 1:50 (2 percent) in any direction.
Figure 63shows the required dimensions and slopes for tent pads and platforms.
An exemption to the surfacing provision is allowed where a condition for departure exists.
The FSORAG doesn’t requireedge protectionon tent platforms.
If edge protection is provided, it must not be placed where it would block access to the platform.
The ORAR should connect to ground-level tent platforms at ground level.
The ORAR can either ramp up to platform level, or it can end adjacent to the tent platform at 17 to 19 inches (430 to 485 millimeters) lower than the platform.
This height is suitable for transferring from a wheelchair to the platform. Figure 64shows a solution for providing an accessible tent platform in a highly developed campground. Figure 64—A tent platform in a highly developed campground at the Coronado National Forest.
Fire Rings, Fireplaces, and Wood Stoves
They are covered together here since their provisions are relatively similar, despite the fact that they are dealt separately in different sections of the FSORAG document. In cases where fire rings and wood stoves are supplied, they must individually match the specifications listed below. It is required that when fire rings and wood stoves are supplied in recreation areas, an ORAR be erected in order to connect them to the other major constructed components in the recreation area. For fire rings, fireplaces, and wood stoves in GFAs, an ORAR is not necessary; nonetheless, it is recommended.
- This corresponds to the low-side reach range of the ABAAS.
- This exemption is made in particular for fire rings that are provided in wilderness regions and general recreation zones.
- Often, these fire rings are little more than basic rock circles that might be called temporary buildings suited for use in a wilderness area.
- Some outdoor fireplaces and custom-built fire rings are surrounded by a wall, which may be constructed of bricks or mortared stone, to contain the fire-building area.
- This requirement is illustrated in Figures 65 and 66.
- Height and reach requirements for unique fire rings are depicted in Figure 66.
- Because the material used to construct commercial fire rings is typically not very thick or wide, the reach to the fire-building surface is typically less than 24 inches (610 millimeters).
a clean floor or ground area that reaches at least 48 inches (1.220 millimeters) out from the ring or stove and is at least 48 inches (1.220 millimeters) broad around the whole fire ring, fireplace, or wood stove is required around all useable components of the fire ring, fireplace, or wood stove.
- The clean area must be next to, but not within, the ORAR, and it may not be within the ORAR itself.
- There may not be a slope more than 1:50 (2 percent) in any direction surrounding a fire ring, fireplace, or wood stove.
- An exemption allows for a slope of up to 1:33 (3 percent) in any direction where it is necessary for sufficient drainage to be achieved.
- If there is a valid reason to diverge from the slope and surface criteria for fire rings, fireplaces, and wood stoves, the exemption is granted.
It is required that controls and operating mechanisms for wood stoves adhere with the provisions of ABAAS sections 308 and 309, which are detailed in more detail inReach Ranges and Operability Requirements (below).
Tent platform – Wikipedia
Platform for a suspended tent Platform for a portable tent A tent platform is a floor that is used for the purpose of pitching one or more tents. In most cases, it is a wooden platform adjacent to a hiking route that gives hikers with a clean and level location to rest their heads. It may help keep the campers from trampling on the nearby plants, which is beneficial. Tent platforms are available at several campgrounds. Mountaineers occasionally construct tent platforms in their base camps out of natural resources like as pebbles or snow.
Tent platforms, which are put on top of vehicles and support roof tents, are available.
- “Accessibility Guidebook for Outdoor Recreation and Trails” is a resource for people with disabilities. The Forest Service of the United States. retrieved on October 31, 2013
- Catharine Wells, Aaron Starmer, and Timothy Starmer are all members of the Starmer family (1 June 2007). For car campers who dislike RVs, concrete slabs, and loud portable stereos, this guide to the best in tent camping in New York State is a must-read. Menasha Ridge Press, pp. 47–, ISBN 978-0-89732-641-4
- Boy Scouts of America, Inc., pp. 47–, ISBN 978-0-89732-641-4
- (June 1967). It’s a Boy’s Life. pages. 34–.ISSN0006-8608
- Bonnier Corporation, pp. 34–.ISSN0006-8608
- Boy Scouts of America, Inc. (January 1937). Popular Science, Bonnier Corporation, pp. 38–.ISSN0161-7370
- Doug Matthews, Popular Science (23 May 2012). 288–288. ISBN 978-1-136-36545-4
- Special Event Production: The Resources, Routledge, pp. 288–288. ISBN 978-1-136-36545-4
- The following are examples of tent platforms and related items: floating tent platforms, stacked tent platforms, flooring systems for event tents, etc.
Tent Pads And Tent Camping • Campetent
A tent pad saves time and effort by eliminating the need to search for a suitable location to pitch a tent on a campsite. Tent campers only need to set up their tent, determine which way it will face, and stake it down to begin their camping experience. For those unfamiliar with tent camping, a tent pad is a dedicated and well-maintained spot on certain campgrounds where you may set up your tent and rest your head. This defined space is typically square in shape, and it is surrounded by a single row of timbers that serve to contain the fill material.
On the campsite, a tent pad resembles a giant sandbox in terms of appearance.
These are also quite easy to identify.
The following are some of the advantages of using a tent pad:
- A surface that is level and even to allow for pleasant resting
- In the case of rain, a raised surface will prevent standing water from accumulating around the tent’s base. As an added bonus, retaining timbers deflect any flowing ground water around the tent pad. In the event of heavy rain, there is far reduced chance of the tent floor flooding. The tent pad fill contains no large rocks or tree roots, and it is suitable for use with tent pegs, even if the campsite itself is on rocky terrain. The compacted, flat surface reduces erosion, improves drainage, and prevents the surface from becoming mushy and muddy after most rainfall. The defined area helps to prevent damage to the rest of the campsite as a result of the constant staking of tents in the area. The demarcated area helps to prevent tent floors from destroying plants in other parts of the property, which is beneficial.
Tent Pad Surfaces
The tent pad fill between the retaining timbers can be made up of a range of different materials, including:
In fair weather, a packed-dirt tent mat is the most cost-effective and most comfortable of all the tent pads. Stakes are easily accepted and held in place by the compacted earth. Wood chips or pea gravel can be placed on top of the soil fill to limit the quantity of mud that is tracked in during a rainstorm. A light ground fabric is frequently sufficient because soil is not abrasive or sharp, and campers should check for and remove any stones that may breach the tent floor before putting up their tent.
Footwear may be kept dry and protected from the elements by using a covered entryway.
When filling tent pads, it is common to come across sandy dirt. The blend of soil and sand holds pegs in place nicely and drains better than compacted dirt. Even in good weather, sand can track, so campers will need to take precautions to keep their tent’s bottom as clean as possible.
Because sandy soil absorbs water more quickly than packed dirt and does not compact as tightly as packed dirt, stakes in this type of fill are more prone to go loose after moderate to severe rainfall. Stakes that are longer in length help alleviate this problem.
Beach sand fill is a type of tent pad fill that is not frequently encountered. It is primarily the province of beach camping, which is a completely different beast from inland camping in many ways. Pure sand does not pack effectively and, as a result, does not retain stakes as well as other types of surfaces.
Despite the fact that pea gravel is not commonly found in tent pads, it provides a very pleasant surface for tent camping. During heavy rains, the tiny, rounded stones drain efficiently and prevent muck from accumulating around the tent. Because the stones do not have any sharp edges, there is minimal chance that the bottom of the tent floor will be damaged as a result of the stones. Tent pegs of standard size may be driven into pea gravel.
Campers may be a little disappointed to discover a tent pad that is little more than crushed rock fill. In certain cases, a gravel tent mat is appropriate for family tent camping, although it necessitates extra preparation while pitching the tent. Because there will be no muck surrounding the tent for tent campers to contend with when it rains heavily, gravel fill can even be beneficial in heavy rain. Crushed rock is the most common type of tent pad fill used by campgrounds since it is affordable, durable, requires little maintenance, and drains well.
- If the rock is particularly firmly packed, rebar and a small maul may also be required.
- Crushed rock creates a rough surface on tent flooring, as well as sharp edges on the borders of the tent.
- It is recommended that you use a thick ground cover under your tent to protect the floor from wear and punctures.
- A gravel tent pad will require the use of a ground cloth of this sort, which will add bulk to your camping kit but will provide a pleasant camping experience.
- In order to sleep comfortably, a self-inflating sleeping pad or an inflatable air mattress should be used.
Sand and gravel
A tent pad can be filled with sand and gravel, which is a suitable material. The sand fills in the gaps between the pebbles and smoothes out the surface’s roughness.
Small spherical multicolored stones may also be obtained for use as tent pad fillers in a variety of colors. They provide for a really pleasant camping surface and drain quite nicely as well. Large, heavy-duty stakes, similar to those used for gravel tent pads, may be required to penetrate into the rock and properly attach the tent.
Tent pad surface tips
Tent campers may observe that certain tent pads with a fill that drains well will have a tile pipe that feeds out the downhill side of the pad to aid in the drainage of water away from the tent pad during heavy rains and thunderstorms.
Campers should enquire about the surface of the tent pads at a campsite before arriving so that they may carry the appropriate supplies to pitch and protect their tents.
Tent Pad Sizes
Large differences in size exist between tent pads based on where you live in the nation and whether you are hiking or just enjoying a weekend at the campsite. Despite the fact that there are no standard measurements, tent pads are frequently square in shape and are available in the following sizes:
Small (8′ x 8′)
A tiny tent pad may accommodate a family tent that sleeps up to four people. A tent pad of this size is more likely to be found in a backpacking campsite, although it can also be seen at a developed campground on rare occasions as well.
Medium (10′ x 10′)
A medium-sized tent pad may accommodate a family tent that sleeps up to six people. Back in the day, leisure tents were much smaller than they are today, and a tent pad measuring 10′ by 10′ was spacious enough to accommodate the majority of family tents from that time period. Old national park campsites and campgrounds on the west coast still have tent pitches this size, which is frequent in the summer.
Large (12′ x 12′)
A big tent pad may accommodate a family tent that sleeps up to eight people. At the eastern United States, tent pads of this size are more prevalent in campsites near the Appalachian Mountains, although they may also be found in other regions of the country.
X-Large (15′ x 15′)
An x-large tent pad can accommodate many people, including a family tent that can accommodate up to ten people. These are frequently seen in modern campgrounds and are large enough to fit the majority of today’s larger family tents. Tent pads of this size are widespread at campsites around the Midwest, but they may also be found in other regions of the country as well.
Tent pad size tips
Each of these tent pad sizes gives approximately 50 percent greater surface area than the next lower size in the sequence. Tent cushions are also available in a number of other shapes and sizes, including square and rectangular. When it comes to tents, the same rule should be applied: a small family tent has walls that are up to 8′ in length; a medium-size family tent has walls that are up to 10′ in length; and so on. In the event that campsites and tent manufacturers come to an agreement on standard tent sizes, tent campers would have the assurance that a certain size tent will fit on a specific size tent pad at a park.
Oversize tent pads
Tent pads that are more than 15 feet on each side are considered big. These pads can accommodate family tents with a sleeping capacity of 12 to 14 people, which is pretty much the maximum size and sleeping capacity for a family tent. If necessary, this size may be utilized to set up two small to medium-sized family tents on the ground. Large tent cushions are typically rectangular in shape. A 12′ by 20′ pad, for example, might be used as an example. Large tent pads are more common at group campsites, although a large tent pad may also be seen in an individual campground every now and then as well.
The provision of enormous tent pads at individual campsites by campgrounds may be resisted since campers may be enticed to pitch up many tents on them or otherwise over-occupy the campsite as a result.
Oversize family tents vs tent pads
Family tents that are X-large and larger are typically rectangular in shape, with at least one pair of opposing walls that are 12′ or less apart. Square or rectangular tents with all four walls measuring more than 12 feet in length are often outfitter pole or outfitter frame tents, which need more pole framework than a family tent is capable of providing. Outfitter tents are often set up in the outdoors or at a group camping on a big, level expanse of flat land with no obstacles. Other examples of enormous family tents are the 3-room family tents, which can be fashioned in the shape of a “L,” a “Y,” or a rectangle, among other configurations.
If you are camping in an area with uneven ground and no large tent pad, it may be difficult to set up your tent in this area.
Sizing a tent for local tent pads
Before purchasing a new family camping tent, campers are recommended to enquire about the sizes of the tent pads available at local campgrounds. The length of the longest tent wall, rather than the area of the tent floor or the specified sleeping capacity of the tent, is the most essential element in sizing a tent to a tent pad when using a tent pad. The campers may have to pitch their tent somewhere else on the site since the length of the tent is too long for a tent pad, and the terrain may be uneven and sloping.
- In addition, large family tents may become highly unstable in gusts more than a few miles per hour.
- This is not frequent, and it will be noted in the campsite rules and regulations regarding the setting up of a tent.
- An extra-sized tent pad does not necessarily indicate that a park will allow a big camping party to use a single spot, unless the group is comprised of a single family.
- Unlike large recreational vehicles, tent camping vehicles can navigate about a campsite more easily, and tent campers prefer to camp away from the main road anyhow.
- The trees to the west of the tent pad are the next best choice for providing shade for the tent during the hot afternoons.
- A fire ring should be positioned a reasonable distance away from the tent pad and not directly in the direction of the wind.
- Smoke from a campfire may leave an oily residue on the fabric of a tent.
- Tent pad upkeep is important.
- If a tent pad is not properly maintained, the low end will gradually wash out, and the tent pad will gradually develop a large slope over the course of time.
- You should inspect the tent pad before deciding on a camping location.
Conclusion Tent pads handle two of the most difficult challenges associated with choosing a tent site: finding level, even ground to lie on and raising the ground to prevent flooding of the tent floor during heavy rain.
How to Build Your Own Portable Tent Platform
It may seem strange, but a significant part of tent camping and living in the outdoors is about being able to comfortably separate your body from the elements of nature while yet being immersed in them. Consider the implications of this. Make sure you have the appropriate apparel to keep you warm and dry in the rain and cold. You prepare a tent to provide shelter for the night. You’ve even laid down ground tarps and sleeping mats to better insulate and shield yourself from the elements. Because we humans are rather fragile when compared to all that nature may hurl at us, it only makes sense to construct and maintain certain barriers to keep us safe from harm.
There are times when the ground is perfectly pebbled with sharp pebbles wherever you look, and other times when the entire landscape is nothing but marsh.
For some campers, this is simply a fact of life that must be endured; for others, a movable tent platform may be utilized to their advantage.
Why build a portable tent platform
The main benefit of a portable tent platform is the ability to have convenience and comfort whenever and wherever you want it. It is especially beneficial if you anticipate spending a significant amount of time in your tent. More permanent tent structures, such as yurts, tipis, and canvas tents, are frequently placed on wooden tent platforms, and camping platforms have become increasingly popular in the world of glamping, or luxurious camping. Even if sleeping on a tent floor over rough terrain and uneven ground, or waking up fatigued to find a flooded tent, the novelty of such an experience quickly wears off.
- Despite their expertise, even the most experienced campers have their limits.
- Those traveling by vehicle will quickly discover that a tent is far more comfortable, while those traveling in RVs may require a “extra room” of some form depending on the amount of people traveling.
- Those who will be sleeping in the tent will be really grateful.
- This manner, you can quickly put it where you want it, pitch your tent on top of it, and then go from there if you so choose.
- In addition to long-term visitors, this is also significant for campers who are substantially older or younger than the average age.
- In comparison, the experience of someone in their 80s or even a toddler-aged camper is vastly different.
The use of a portable tent platform is highly recommended if you anticipate camping with anyone who would benefit from an additional layer of protection from the weather.
How to build a portable tent platform
There are a number various ways to construct a portable tent platform, and each one is dependent on your definition of portable as well as your understanding of what constitutes a decent platform. It has been recommended on certain online forums that all you need is two foldable tables put up side by side and you’ll have all you need. This is not true. Of course, you are allowed to experiment with this, but it is not suggested. In this section, we will discuss two approaches to developing a platform that is more resilient and helpful.
Building a removable tent platform for a trailer
One of the most effective methods of constructing a portable tent platform is to place it on top of a trailer. There are several changes and building options available to you as a result of the readily transportable and robust basis on which you may build your structure. This example will show you how to build a temporary tent platform on top of a 4′ by 6′ trailer, which will be described in more detail later. The finished product is large enough to accommodate a conventional 7 × 7 tent and is constructed in such a way that storage space can be found beneath the platform.
- When going on a road trip or vehicle camping, all you have to do is pull over, set up your tent, and you’re ready to go.
- So, in order to construct this platform, you will first require a few components.
- It may be any size you choose; all you have to do is make the necessary modifications to your own build.
- For a trailer that is 6 feet long, you will need at least 51 feet of lumber.
- That’s all there is to it for the wood you’ll need.
- You’ll need a package of wood screws to help you put everything together when you’ve finished.
- After all of this, the only thing left to figure out is what you’re going to use for the outside supports, which we’ll cover in a bit more detail later.
- You will, however, require some basic equipment to make the process simpler.
Construction of the removable tent platform for a trailer
As soon as you have all of your materials available, it will be time to begin construction. The first item that has to be constructed is the platform’s foundation. The trailer’s base is constructed of three 2×4 supports that run the length of the trailer. One on either side of the room and one along the center. These supports will be used to attach the entire platform to the ground. A 6′ long trailer will require nine 2×4 pieces along the length of the trailer’s interior, with each section measuring 6′ in length.
- After that, you’ll need to cut fifteen support struts from the 2x4s you’ve gathered.
- To ensure a level trailer, the top piece of 2×4 should be level with the top edge of the trailer’s sides.
- As soon as you have screwed all of these 2×4 pieces together and placed them in their proper locations, you are ready to proceed.
- In order to create an inner platform, you will need to join two of the 48 boards together.
- You will still be able to lift the boards to gain access to the storage area beneath them.
- The remaining hinges will be used to join each part to the inner platform once it has been assembled.
- In order for these outboards to be able to fold inward, the hinges should be strategically placed.
- Due to the fact that these outside boards will be a little unsteady, you will need to construct legs for them.
- Some people have been inventive with similar ideas, and they have utilized chair legs, table legs, and even old walkers as structural support for their creations.
Whatever you choose to utilize, you’ll need something to assist support the outside platform, regardless of what you choose. You are now finished with your trailer tent platform for your portable tent platform!
A simpler construction
For those of you who find the trailer platform construction too time-consuming or who prefer not to have something constructed on top of a trailer, this next project is for you. It doesn’t get much more straightforward than this. Once again, this design is intended for a traditional-sized two-person tent, but you may modify it to meet your specific requirements by adding more space. You may potentially construct multiples of these platforms and arrange them next to each other on a flat surface.
- Two 48-inch sheets should be plenty.
- Aside from that, you will just require basic woodworking equipment such as a drill and a circular saw.
- Caution should be exercised when connecting the boards.
- Attach the hinges equally spaced around the centre of the sheets so that the sheets fold inward when the sheets are folded.
- When it is fully unfurled, the 2×4 base should provide sufficient support for your requirements.
- If you so like, you may also make a few modifications to this design.
- Additional 2x4s or even strong PVC pipe will suffice in this situation.
- This is a great opportunity to be creative, but just adding some hinged pieces of plywood with folding legs would suffice.
Modifications for your tent platform
Once you have invested the necessary effort to construct a DIY portable tentplatform, you can begin to enjoy it to its full potential. If you look around the platform, you’ll see that there are several small things you can make to improve its functionality and convenience of use. Here, we’ll go through some of the small details that, while simple to execute, can have a significant impact on overall operation. As you continue to work with the platform, you will undoubtedly come up with new ideas, which you should consider putting into action.
- Short imitation grass can be purchased at places like Home Depot, and it is simple to install.
- If you prefer wood, you may put higher-quality boards over the plywood sheets and even place a weatherproofing layer on top of that.
- The installation of stairs or even a tiny ladder is another lovely feature that people prefer to have in their homes.
- This may be accomplished by using miniature pool ladders or folding metal stairways, among other things.
- After a long day of trekking that has left you feeling particularly exhausted and worn, you’ll appreciate the fact that your tent is only a handful of little steps away.
- The movable tent platform for a trailer is equipped with hinges that allow you to access the area beneath it, but you can do much more with it.
- You may get creative with other ways to gain access to the space beneath your platform if you choose.
Attachment points for baskets and other add-ons, as well as hooks for displaying items, are all options.
As your DIY carpentry and construction abilities improve, you will notice an increase in the number of options for creativity and originality.
There are a variety of battery-powered outdoor lighting choices that you may incorporate into the platform.
Beyond simply being aesthetically pleasing, this also serves as a valuable source of illumination when camping, making the platform and tent more visible at night.
With the addition of carpets, stairs, additional holding places, and lights, the movable tent platform transforms your tent into a true home-away-from-home experience for guests.
You now have yourself a camping front porch. Alternatively, a gas-powered or do-it-yourself camping stove, as well as a cooler, may be used to create an outdoor kitchen. An advantage that may be capitalized on time and time again is the availability of a movable tent platform.
With a few basic carpentry skills and a little imagination, you can construct a portable tent platform that is both sturdy and functional. Camping will become a far more relaxing experience as a result of the platform. With only a few inches of wood and a few hours of construction work, you will be able to get away from tough terrain, flooded campsites, pests, and animals. You will be able to take full advantage of the wonderful outdoors. A tent platform, such as this one, may also be a really wonderful way for less experienced campers, elderly campers, and very young campers to enjoy camping without having to rough it as much as they would otherwise.
Even if you don’t have one, you can still construct an excellent tent platform.
Do you have any suggestions about how to make it more helpful and comfortable for yourself?
Regardless of the platform you create, make it yours.
Create A Bell Tent Platform Deck
Even while a Life inTents bell tent is beautiful on its own, installing the tent on a hardwood platform makes it sparkle like no other tent in the world. However, it is not only about the beauty, but also about the functionality of the item. Building a base for your bell tent is the best way to ensure that your investment remains in excellent shape for many years to come. Using a waterproof bell tent, you may camp for a number of weeks without having to worry about it requiring any upkeep. However, if you want to leave your bell tent up for several weeks or months, you will want to take steps to ensure that it is properly protected from both standing and rushing water.
A tent platform elevates your tent off of wet ground, speeding up the drying process of the canvas and limiting the formation of mold in areas where the sun has difficulty reaching the tent’s canvas.
It is true that this insurance comes at an additional expense, but it is well worth the extra time and effort to get.
Selecting a Tent Platform Design
Platforms are available in a variety of shapes and sizes, with no one design being significantly more useful than the others. The most common designs for a 16-foot (5-meter) wood bell tent platform are squares (20’x20′), rectangles (20’x30′), hexagons (11-gons), and orhendegons (11-gons), all of which may be used with or without decks.
The design selection that is best for you will be decided by your intended function, shape, and financial constraints. Materials, labor, and design are the three primary factors that influence the cost of a platform.
- The cost of materials increases according to the size of the platform
- Hiring a carpenter is unquestionably more expensive than attempting the project on your own
- In general, the more unconventional your design, the longer it will take to construct (see bullet2)
If your site is not level, you may also need to build footings to your platform, which may necessitate the construction of a stairs to reach to the front door. credit: @amlwarner photo credit: @boulders hideaway photo credit: @amlwarner Photo credit: @DalefarmphotosPhoto credit: @paintrockfarmPhoto credit: @Dalefarmphotos
Tent Deck Material Considerations
Your platform will be subjected to harsh weather conditions, which can vary depending on where you are located. The effects of the sun, rain, snow, and humidity on your platform can all deteriorate its condition over time. Used treated timber and fasteners that are constructed to endure changing weather conditions are suggested for use in this project. In terms of wood for bell tent decks, cedar and redwood are two of the best options, followed by pressure treated wood, which is a more cost-effective alternative.
Materials might cost anywhere from $2,000 to $5,000, depending on the size of your platform, the quality of the wood, and the location of your platform. The cost of labor will also vary based on a variety of circumstances, but it is likely to be between $1,500 and $3,000 per hour.
Securing Your Tent Properly
The procedure of erecting your tent on the platform is largely the same as the process of erecting it directly on the ground. You will, however, need to plan ahead of time how you will attach the guy lines and the floor of the tent to the platform itself in a smart manner. The following steps are used to secure the floor: Once you’ve set up your tent on the platform, the following step is to tie the floor to the deck at each of the four corners, making sure that the floor is taut and free of wrinkles in the process.
- A washer should be used to secure the D-ring of each corner of the groundsheet so that it does not slip over the screw or bolt.
- Another alternative is to use a heavy-duty screw hook as a temporary solution.
- Individuals have just extended their guy lines from the tent and secured them right into the ground just a few feet away from where the platform is.
- In order to ensure that the bell tent is set up on stable ground, the guy lines are intended to be stretched at a particular specific angle from the roof seams.
- We recommend attaching the guy lines to the posts that have been installed to the deck.
- Using this method, you will be able to extend the guy lines at their proper angle while also eliminating any possible tripping hazards.
You could either construct a taller post to support the guy line tied to the door, or you could add a second guy line above the door and tie each end to the posts directly to the left and right of the entrance, as shown in the illustration.
Bell Tent Platform Design Plans by Life inTents
We’ve created some really elaborate bell tent layouts that you might want to consider installing on your deck if you have the space. Our bell tent deck designs are exactly designed to fit the design of a 5-meter (16-foot) bell tent and include a deck off the front entrance for an awning, steps, and sturdy footings to provide a safe and secure structure. We’re glad to provide them for free with the purchase of a canvas tent from Life inTents. 5M people have life intentions. Rendering of the bell tent platform design
Alternatives to a Glamping Tent Platform
If you don’t have the resources to physically construct a platform, or if you only want a temporary protective ground barrier, you might construct a raised and flat rock bed on which to pitch your bell tent instead. We recommend that you use finely crushed rock such as decomposed granite or 14 minus gravel for this project. It should be enclosed with edging that is approximately 2 feet away from the tent’s exterior walls. Place about 1.5″-2″ of the material on top of the previous layer, packing the rock down between every 0.5″ layer.
Please feel free to share your thoughts and suggestions with us!
Start A Mobile Glamping Business in 2022
Glamping event providers and backyard glamping enterprises began to spring up in the Wes boroughs in the year 2015. Mobile glamping enterprises are in high demand right now, surpassing their supply, making this a fantastic small business opportunity in your local community. We want to assist you in determining whether or not it is the right moment for you to start your own glamping rental business. THE LIT LIST will be published on January 9, 2022. 6 minutes to read
How to Maintain and Clean a Bell Tent
Canvas tents are extremely durable and may last a lifetime if they are properly maintained. Canvas tents, like keeping a healthy body, may last a lifetime if they are properly cared for and maintained. Here are some ideas to help you clean and care for your bell tent so that you may get the most usage out of it for a long period of time.
How to Pitch a Tent on a Wooden Platform
The 9th of January in the year 2021 Frequently Asked Questions are included below. Many state parks, national forests, and national parks offer campsites with wooden tent platforms, which may be found in a variety of locations. Anyone who has attempted to pitch a tent on one of these will understand how difficult it can be, especially if you are using a tent that is not self-supporting and requires tent stakes to be erected. These wooden platforms are generally equipped with metal anchors or loops that are situated around the perimeter; however, they are only useful provided you remember to bring along extra guylines that are long enough to reach them.
- Most wooden camping platforms, on the other hand, are covered with parallel planks that have spaces between them to prevent water from accumulating on top of the platform when it rains.
- These tent anchors are ideal for use when erecting tents on wood platforms.
- Pictures on the left and right depict the top and bottom of the anchor, respectively, while pictures on the right depict how the anchor should be placed in the space between two boards.
- According to the thickness of the guylines you have, there are a variety of applications for them.
- These tent anchors are lightweight, weighing only 8 grams apiece, and are small enough to fit in your stake pack if you anticipate needing to sleep on a tent platform in the future.
Furthermore, they are quite inexpensive (11 dollars for ten anchors), making them extremely convenient for the pocketbook. I believe they are an excellent low-impact option and have a strong preference for them for this application.
- Do You Need a Tent Footprint for Backpacking
- What are the Strengths and Weaknesses of Trekking Pole Tents
- How to Prevent Tent Condensation
- How to Pitch a Tent on a Wooden Platform
- How to Dry a Wet Backpacking Tent
About the author
Creator of SectionHiker.com, which is well-known for its backpacking gear reviews and hiking FAQs, Philip Werner has walked and backpacked over 7500 miles throughout the United States and the United Kingdom, and has authored over 2500 articles in his capacity as the site’s founder. Hiking and backpacking enthusiast from New Hampshire and Maine, Philip is the 36th person to travel all 650 trails in the White Mountain Guide, a distance of nearly 2500 miles. He plans to complete a second cycle of hiking trails in the White Mountain Guide in 2021.
Backpacking the White Mountain 4000 Footers is available for download here.
NOTE FROM THE EDITOR: If you’re considering about purchasing gear that we’ve reviewed or recommended on SectionHiker, you may contribute to our fundraising efforts.
Simply click on any of the vendor links provided above.
Thank you for your assistance, and please know that we appreciate it!