What Size Led Grow Light For 5X5 Tent

Best LED Grow Lights 2021

LED grow lights for big areas may be rather expensive, especially if they are custom made. Growing lights on the market today are either inefficient or do not adequately cover the specified coverage area. In addition, many of these lights are significantly expensive. For a device that costs $1,000 or more, you want to ensure that you’re receiving not just a high-quality product that will last for several years, but also an LED grow light that is efficient and uniformly distributes the light across the grow room.

Among the LED grow lights on this list will be those with a blooming coverage area of 5’x5′ and those are most suited for a full-cycle grow (from seedling through flowering).

These are not included on this list because they are either DIY grow lights or lights that need extensive assembly.

I consider the following factors while selecting an LED grow light for this list: PAR output, efficiency, spectrum, light spread, diodes, drivers, and warranty.

  1. Do you want to have a deeper grasp of PAR output, spectrum, effectiveness, energy consumption, or light distribution?
  2. ChilLED Growcraft X6 1000W ChilLED Growcraft X6 1000W (Commercial Grade) LED Grow Lights are becoming increasingly popular.
  3. Featuring six LED bars and 3rd Generation 2020 Samsung, Growcraft Yield Max Spectrum Diodes, this is the ideal light for a smaller business or residential setting.
  4. Although dimmable down to 50 watts, it is not recommended for use in a bathroom.
  5. A hang height of between 18″ and 30″ is recommended, and this unit can cover a surface up to 6′ x 6′ in size.
  6. Link to ChilLED Technology (Discount code: MRGROWIT) Hydro connection is a joyful occasion.
  7. LEDs: 3rd Generation by 2020 Samsung and Growcraft are two examples.

the PF is 2450 mol/s.

1000 watts of power consumption Area of coverage: Standard 5′ x 5′ up to a maximum of 6′ x 6′ Luminaire distances range from 18″ to 30″ Dimensions: 42.5″ x 42.5″ x 1.375″Weight: 33.85 lbs.

With a name like Raging Kush, it’s clear that this fixture has a certain function.

With full spectrum warm and cool white LEDs, as well as 660nm and 720nm red diodes, this unit will allow for long bloom cycles and a wide range of color temperatures.

It barely consumes 690 watts but has a phenomenal PPF of 1677 mol/s (or 1080 mol/s/m2 PPFD), which is incredible for its size.

Because of this, there is no need for an additional and costly grow room controller.

LED Grow Light Depot is a web address.

PPFD: 1080 mol/s/m2 (parts per billion).

wattage draw: 690 watts Area of coverage: Vegetative Flower 4.5′ x 4.5′, 5′ x 5′, 5′ x 5′ Light distances range from 6″ to 36″.

Warranty: A 5-Year Limited Warranty is provided.

Despite the fact that it is labeled as a 5′ by 5′ LED grow light, it has the capability of covering a veg region up to 7′ x 7′.

It is constructed with full-spectrum white LEDs and has a reasonable PPF of 1400 mol/s while producing 95,000 lumens at a low price.

It should be able to readily replace a 1000 watt high-pressure sodium lamp, but with half the heat and energy consumption.

Also, at only 23 lbs, it is reasonably light in comparison to other options.

This LED grow light is made in the United States and comes with a 5-year warranty.

Click here to go to Amazon’s website.

Efficacy of PAR: 2.15 mol/JW.

Area of coverage: Vegetative Flower 5′ x 5′, 7′ x 7′, 7′ x 7′ Distance between lights: 12″ to 24″ The following are the dimensions: 37″ x 37″ x 2.5″ Weight:23lbs Warranty: A 5-Year Limited Warranty is provided.

PanthrX II LED Grow Light is a high-performance LED grow light.

The fixture is constructed entirely of Top Bin LED Samsung LM561H full-spectrum white and 660nm red diodes, which together generate a spectrum that Crecer Lighting claims will result in “sturdier plants, better development, and improved yields” in the garden.

When hung at a height of 24″ above the canopy, you may expect a PPF of 1600 mol/s, which should be sufficient to replace a 1000 watt HPS.

The PanthrX II has a lifetime rating of 100,000 hours and is covered by a three-year limited warranty.

PPF: 1600 mol/s (parts per billion).

It is equipped with Bridgelux Vero29 Generation COB LEDs, with a choice of 3000K, 3500K, or 4000K color temperatures.

According to the manufacturer, the system’s effectiveness is 450 PAR watts, which translates into a PPF of 2097 mol/s, or an averaged PPFD of 905 mol/s/m2.

It should be noted that it weights significantly more (45.8lbs) than other similar-sized fixtures now available on the market.

The Fatty VS and other timber grow lights are covered by a three-year limited warranty.

LED Grow Light Depot is a web address.

PPF: 2097 mol/s PPF: 2097 mol/s Efficacy of PAR: 450 PAR Watts 620 watts of power are used.

Dimensions: 43 inches wide by 38 inches high by 4 inches deep Weight: 45.8 kg Warranty: Three-Year Limited Manufacturer’s Warranty Horticulture Lighting Organization Grow Light HLG 650R – LED Grow Light HLG 650R In the HLG 650R LED grow lamp, top bin LED Samsung LM561H full-spectrum white diodes, as well as 660nm red LEDs, are used to provide full-spectrum white light.

  1. This spectrum is appropriate for seed to bloom applications, and it is compatible with the HLG 30 UVA Supplement bar if further UVA protection is required.
  2. It has a dimmable range of 60 to 630 watts, allowing you to tailor and adapt to your customers throughout the growth cycle.
  3. High-quality components, including as the Samsung full-spectrum quantum boards and the Inventronics EUD-600 driver, were used in the construction of this fixture by HLG.
  4. Hydro connection is a joyful occasion.
  5. Click here for an Amazon link LEDs: Top Bin LED, Bottom Bin LED, Bottom Bin LED Full-spectrum white and 660nm red diodes from Samsung LM561H.
  6. coverage area: Vegetative attage draw:630w attage draw:630w Flower 5′ x 5′, 7′ x 7′, 7′ x 7′ Light distances range from 30″ to 48″ 26 inches wide by 21.25 inches high by 4 inches deep.
  7. Additionally, this LED grow light made my list of the Best LED Grow Lights for a 4×4 Coverage Area.

Despite the fact that this LED grow light requires a slightly greater input of 780 watts, it nevertheless maintains a consistent PAR effectiveness of 2.6 mol/J throughout time.

It features a 120-degree beam of light that is dimmable and provides a wide spread of light throughout the canopy.

Are commercial certificates required for indoor commercial activities, since we’re on the subject?

Enlite Ceres is additionally backed by a 5-Year Limited Manufacturer’s Warranty.

PPF:1976 mol/s (parts per billion).

wattage draw: 780 watts Area of coverage: Vegetative Flowering 4′ x 4′ or 5′ x 5′, 5′ x 5′, 5′ x 5′ Light distances range from 6″ to 12″.

Weight: 35.5 kilograms Warranty: A 5-Year Limited Warranty is provided.

The ROI-E680 was developed in collaboration between TSL Horti Tech and Grower’s Choice.

The ROI-E680 fixture has a PAR effectiveness of 2.6 mol/J and draws 680 watts from the power supply.

Its color temperature ranges from 3000 to 3300K, delivering the correct wavelengths needed to perfect the veg and bloom stages of plant development.

Because it comes with several certifications appropriate for commercial spaces, including IP65, ETL, and CE, as well as an estimated lifespan of 54,000 hours, Growers Choice has constructed this light with durability in mind.

A three-year limited warranty is included, just as with all of their items.

1700 mol/s is the PPF.

wattage draw: 680 watts Area of coverage: Vegetative Lighting Distances: 12″ to 24″ for a 5’x5′ plant, 4’x4′ to 5’x5′ for a flowering plant 4.24 x 42 x 2.44 inches Dimensions: 30 lbs.

The 1700e Gen 2 LED grow light is the final LED grow light on my list, and it is also one of the LED grow lights that made my Best LED Grow Lights for a 4×4 Coverage Area list.

A 6′ by 6′ vegetative grow is acceptable for its intensity, as is a 4′ by 4′ or a 5-foot by 5-foot floral grow, which are both significantly smaller.

It is capable of replacing a 1000 watt high-pressure sodium lamp with this number of diodes.

Gavita Pro estimates that passive cooling will result in a 30 to 40% reduction in HVAC costs when compared to conventional cooling.

Gavita, in contrast to many other commercial lighting companies, provides a 5-Year Limited Warranty.

PPF: 1744 mol/sPAR efficacy: 2.6 mol/JW PPF: 1744 mol/s power draw:646 watts attage Area of coverage: Vegetative Six feet by six feet; flowering four feet by four feet to five feet by five feetLight distance: twenty-four to thirty-six feetDimensions: forty-one inches by forty-three inches by two inches Weight: 28.4 kilograms Warranty: A 5-Year Limited Warranty is provided.

Do you believe that any additional LED grow lights (with a blooming coverage area of 5’x5′) should have been included on this list?

What aspects of these LED grow lights do you find appealing or objectionable?

THE NEXT PAGE: LED Grow Light Purchasing Guide CATEGORIES: Beginners Begin by visiting this page. Seeds and Planting SuppliesGrowing Equipment Nutrients for the Growing Room Cloning during the seedling stage Stage of VegetationFlowering Stage of Vegetation Harvest Plant-Related Issues

Lighting for a 5×5 Grow Tent?

  1. Date of joining: March 5, 2019 Messages:25Likes Received:3 Hello, I’m going to make the decision to purchase my first grow setup. My research has led me to believe that there is a clear solution to how to light a 5×5 grow tent, but I have yet to come across one. My intention was to utilize two LEDs with a combined power of 1,000 watts. Thoughts? Thanks
  2. Date of joining: March 5, 2019 Messages:25Likes Received:3 60x60x80 (inches) are the dimensions of the tent.

CanibisWell-Known Member

  • Date of joining: June 24, 2018 Messages:1,762 Likes Received:1,732

Tbone ShuffleJack of All TradesOld School

Date of joining: June 8, 2016 Messages:15,873 Likes Received:11,262 Using qb’s, you can outfit a 5×5 with half as much power as a 4×4. The cost is significant, but depending on where you live and local power rates, you’ll save $50 to $100 per month on electricity use over 2000 watts. Not to mention the fact that the quality is, in my opinion, superior. I’m assuming you’re referring to rated watts. Having said that, I am not aware of a single LED grow lamp with a “1000w” rating that is worth purchasing.

  • Their real watt total has been as low as 130 watts in my experience.
  • For a 5×5, I’d want to run 9 qb96s and 3 meanwell HLG-320h-54a drivers for a total wall draw of around 1100 watts when the system is fully loaded.
  • If you’re not the do-it-yourself type, the new Mars SP-250 is a great looking machine for the money.
  • Mars SPFrom250 LED Full Spectrum Hydroponic LED Grow Light for sale, purchase Mars SP-250 LED Full Spectrum Hydroponic LED Grow Light – Mars Hydroponics.

Tbone ShuffleJack of All TradesOld School

  • Since joining on June 8, 2016, I’ve received 15,873 messages and 11,262 likes. I believe that a lot of individuals enter a 5×5 grow area without realizing that this is actually a very large space for an individual flowering area. A 5×5 may produce 3-4 pounds of fruit or more, yet they require a lot of energy to be filled. When grown in a personal area, a 4×4 will provide far more bud than a regular home grow would require to meet their demands. It’s around 70% smaller, which means you can furnish it with significantly less power. They’re more effective than we are. In those, a power output of 500-650 watts is enough. I’ve gained 2 pounds in a 4×4 container. For me, a harvest suffices as a sufficient amount of food. As long as you have a 4×4 vegetable garden going at the same time, you may harvest every ten weeks and just shift the next veg plants into the flowering area every time you clean it out of the veg garden. There will be many more harvests every year, as well as the potential to have two lighting systems, one targeted toward flowers and another aimed toward vegetables. 3×3 is actually big enough for most people, and you can fill one of them with just around 350 watts. Veg needs less than half the electricity per square foot. Once you get enough experience, you can harvest more than a pound of fruit. I wholeheartedly agree. I have a 3×4, and I was thinking today that a 3×3 might have been preferable for the situation

Tbone ShuffleJack of All TradesOld School

Date of joining: June 8, 2016 Messages:15,873 Likes Received:11,262 When you’ve never grown before, 5×5 seems like a little space, but it’s actually very large for a blooming area for a personal size grow. I drive 4x4s, which are a little huge, but I’m a big pothead, and my wife is as well, so we require double the amount of space as the average smoker. I prefer to have enough money to be able to give it away without having to think about it. That is something you can accomplish in a 4×4. While I’m not trying to be derogatory, a 5×5 is actually only required if you want to have enough inventory to sell.

See also:  How Many Round Tables Fit Under A 20X20 Tent

Tbone ShuffleJack of All TradesOld School

  • Date of joining: June 8, 2016 There have been 15,873 messages sent and 11,262 likes received. Each single square foot takes an additional $50 in power per month to fill with flowers and hundreds of dollars in additional lights for each additional square foot. Three-by-threes are extremely efficient. You can fill one with less than $300 worth of absolute top-of-the-line LED lights and be quite content with a power consumption of roughly 350 watts. Even in more expensive places, you’ll only pay $35 for your electricity. Date of joining: March 5, 2019 Messages:25Likes Received:3 Thank you for all of the information
  • I think I’ll have to rethink my plan in light of this. I understand that 5×5 is a large size, but I would rather have too much merchandise than not enough. Prices around here are really high, such as 1,000 for a qp in my network of acquaintances, so I’m really hoping to avoid running out of money before the holidays. With the 5×5, I assumed that if I grew too much, I’d just have to wait a little longer before starting the next grow. In addition, I reasoned that the increased size would help protect me from myself while still ensuring a good harvest, given that I had never done this before. But it’s possible that I’m thinking backwards here? I’ll have to dig into the concept of eternal growth a little further. Is it possible to combine a 3×3 veg room with a 4×4 floral room, or do they both need to be the same size? Is it possible for the two independent tents to share the same ventilation system as well?

ClydeWaltersWell-Known Member

Date of joining: November 20, 2018 Messages:4,476Likes The following were received: 2,3405x QB96 Elite V2’s or nothing at all I’m jp, do you have a budget-friendly friend? Tapatalk was used to send this message from my iPhone.

Tbone ShuffleJack of All TradesOld School

  • Date of joining: June 8, 2016 Messages:15,873Likes Received:11,262 I had intended to use a smaller vegetable area, but I ended up utilizing the same size vegetable area, which I really like. It provides you with the option to train the plant canopy to fill the same amount of area before you relocate it to another location. You also have plenty of area in the corners for little plants that will be used for the following crop. The veg tent ends up being used for seedlings/clones as well as vegetable plants in the end. I believe you would be content with a 4×4. While I purchased a 4×8 and divided it in half, I believe you would be better off with two separate 4x4s. Four QB96s and two HLG-320h-54 A drivers for flower are my favorite initial setups on a 4×4 truck. QB120V2s in 4K for veg or whatever else you can get in 4K, such as 132 V1s, will suffice. There are four of these. QB96 Elite V2 Engine, one of a four-pack of these engines. Quantum Boards QB132 V1 (Quantum Board 132 V1) There are two of them for the bloom. One of these for the vegetables. Connect the flower lights in a parallel fashion to two boards on either side. The veg boards will be connected to the driver in a sequence of four boards. Date of joining: March 5, 2019 Messages:25Likes Received:3 Thank you so much for your assistance
  • I want to purchase all of the items you recommended. Specifically, do they come with wiring or do I have to purchase it separately? Also, what is the most effective method of ventilating the two tents? Is it possible to connect them together and utilize a single exhaust fan to exit the house?

Tbone ShuffleJack of All TradesOld School

  • Date of joining: June 8, 2016 Messages:15,873 Likes Received:11,262 What type of spreader design would you propose for a 5×5 area to ensure uniform coverage and distribution? If the sp250 is only rated for 2×4, it appears like it will have difficulty expanding to 5 feet in length.

smokesaraWell-Known Member

  • There are enough PCs for a 5×5 area if you join on March 2nd and post 4,047 messages and receive 8,6263 likes. The overall draw power must be at least 750 watts, and as previously said, it has the potential to save more than 30% on energy costs. In conventional LED grow lights, plants require 30-50 watts per square foot of growing space, but under the SP-250, they may thrive with just 21-35 watts per square foot of growing space. This bundle is no longer available. Joined:Mar 5, 2019Messages:25Likes Received:3 Is the presence of the heat sink the sole distinction between this kit and the QB96 Elite V2 Quantum Board? Do you think I should try using a different heat sink, or should I simply wait till they replace the stock?

Tbone ShuffleJack of All TradesOld School

  1. Date of joining: June 8, 2016 Messages:15,873 Likes Received:11,262 Personally, I would hold off till they replenish. The excellent power handling capability of those boards, which would be severely constrained if not for the high-quality heatsink and thermal interface pads that come with them, is one of their most appealing features. I’ve simply been looking into where I might be able to find such kinds of products in some alternative types of stores. There is nothing perfect yet. Rapid leds have heatsinks that are spherical in shape. I’m not sure if these would be effective. Pin Heatsink with a 140mm diameter. Thermal interface pads are used in a variety of applications.

What Size Light For 5X5 Grow Tent

For a 5×5 tent, it is advisable to use lights that are around 1000 watts (High-Pressure Sodium). Although HPS lights appear to be yellow in hue, they actually contain color spectrums that are yellow and red. Plants that bloom well in both spectrums are encouraged to do so.

What size of grow light do I need?

In order to begin, you must first establish how much space you will be illuminating. As a general guideline, you should aim for 20 to 40 watts per square foot.

Substitute your bulb’s wattage for 1,000 and divide the result by 20 (for example, 1,000 divided by 20 = 50), then multiply the result by 40 (for example, 1,000 divided by 40 = 25). The result provides you with the extremes of the light intensity range that you have selected.

How much light do you need for a 5×5 grow tent?

Make a rough estimate of the amount of space you’ll be illuminating first. It is generally recommended to have watts per square foot of 20 to 40. Substitute your bulb’s wattage for 1,000 and divide the result by 20 (for example, 1,000 divided by 20 = 50), then multiply the result by 40 (for example, 1,000 divided by 40 = 25) to get your total wattage. The response provides you with the extremes of the light intensity range that you are working with.

How much will a 1000W LED yield?

If you get a high-quality 1000-watt grow lamp, it will illuminate an area of around 25 square feet, which is sufficient for blooming a plant such as marijuana. This is true regardless of whether you choose an LED grow light or a HID grow light system.

How big is a 5×5 grow tent?

Specifications for the Gorilla Grow Tent 5’x5′ Dimensions: 5’x5’x6’11” height with 2 ft. height with 2 ft. 8’11” Extension Kit with a weight of 88 lbs. Density of the canvas is 1680D. The diameter of the pole is 22mm.

What size LED light for 2×2 grow tent?

3. California Light Works is a lighting design company based in California. SolarXtreme 250 LED Grow Light is a high-performance LED grow light. With a power consumption of 200 watts, the SolarXtreme 250 cannabis LED light is appropriate for places up to 9 square feet in size. As a result, a 2′ x 2′ tent or a 3′ x 3′ tent will work perfectly with this light.

How big of a tent do I need for 2 plants?

Here’s a short guide to size your tent based on the number of plants you’ll be growing: Two-foot-by-two-foot grow tent — Ideal for mother plants (1-2 plants) 2′ x 4′ Grow Tent — This size is suitable for most closets (2-4 plants) 3′ by 3′ Grow Tent — This size is ideal for folks who have a limited amount of space to work (2-4 plants)

How much is a Gorilla Grow Tent?

This item is available for purchase. A complete heavy-duty 1680D reflective hydroponic grow tent for growing indoor plants (5-foot by 5-foot) with a free 1-foot height extension kit, windows, and a floor tray is available from Gorilla Grow Tent. Add this item to your shopping cart Customer satisfaction is rated 4.3 out of 5 stars (95) $53044 is the price. Sparkle Gardening is the seller.

Does more light equal more yield?

Because light truly equals yield, farmers may compare their present flowering light levels to the 1,500 PAR objective to see if they are meeting the standard. The increase in PAR from 1,000 to 1,500 provides a yield increase of up to 33 percent.

How much can you yield in a 4×8 tent?

Generally speaking, the yield from a 4×4 grow tent can range anywhere from 1lb to 2lb (16-30oz). However, there are a lot of decisive elements to consider. Consider factors such as the growing style (SoG, ScrOG, Flux, Bush), the height restriction, the quantity of plants, and the surrounding environment, among others.

How much area does a 1000 watt grow light cover?

When hanging 2 feet above the plants, a 1000 watt grow lamp can illuminate an area of around 7 feet square when suspended 2 feet above the plants. A 400-watt lamp would be sufficient for illuminating an area around 4 feet square.

What is the best 5X5 grow tent?

Reviews of the 13 Best 5X5 Grow Tents MARS HYDRO SYSTEM Grow Tent measuring 5′ x 5′. VIPARSPECTRA Hydroponic 5’X5′ Grow Tent with LED Lighting. OPULENT SYSTEMS OPULENT SYSTEMS Water-Resister Grow Tent measuring 5′ x 5′.

The VIVOSUN 5’X5′ Grow Tent is a good size for small gardens. a Spider Farmer 5’X5′ Grow Tent, by Spider Farmer. ULTRA YIELD Indoor 5X5 Grow Tents for Professionals. Zazzy Hydroponic Indoor Grow Tent has a 60′′ x 60′′ x 78′′ footprint.

How many cars fit in a 5×5 tent?

In a 55 tent, there are nine automobiles.

How many plants can a 1000W light grow?

In a 5×5 tent, there are nine automobiles parked.

How big of a grow tent do I need for 4 plants?

A rectangular tent shape is the most effective for four plants, and the most typical size is a 44. This provides each plant with around 4 square feet of growth room (or a 22 of the total area). It is really a little less than that, because you want to leave some space between the plants to allow for air circulation. However, this still allows for quite big plants.

Can you have too much light in a grow tent?

Despite the fact that too much light can be detrimental to plant development, it is also a rather simple problem to resolve. Experts recommend 100 watts of light for a 2 foot by 2 foot grow area and up to 1,000 watts of light for an 8 foot by 8 foot grow area, depending on the size of the grow area.

How much does a 1000W led grow light cost to run?

You must multiply your watts by 1,000 to get your wattage (1,000 kilowats in 1 watt). For example, if we were to use a 1000 watt grow light for eighteen hours a day at the kWh rate we mentioned previously, our formula would be: 1 x $0.1559 x eighteen hours x thirty days = $84.186/month.

What size LED light for 3×3 grow tent?

When growing cannabis in a 3 by 3 foot grow tent, the fewest amount of electricity required is 40 watts per plant, while the best grow lights require at least 200 watts for the entire tent.

What size carbon filter for 5X5 grow tent?

Features. Phresh’s carbon intake filters are available in a variety of sizes, and for your 5×5 grow tent, you may choose between the 6 x 12 and 8 x 12 filter sizes. This will be determined by the amount of space available for an intake filter. More than 400 cubic feet per minute (CFM) are produced by both units, with the 6 x 12 producing 450 CFM and the 8×12 producing 460 CFM, respectively.

See also:  How Isa Pwrson Eligible For Tent Xity

What size LED light for 4×8 grow tent?

That means, in order to adequately illuminate your 4 x 8 grow tent throughout the upcoming vegetative stage, you will need an LED grow light bulb with a minimum power of 800W, or you may combine multiple LED lights with a total power of 800W.

What size grow tent do I need for 2 plants?

In order to cultivate two plants utilizing the Sea of green approach, you’ll need a grow tent that’s 2′ by 2′ at the very least. If you want to use the Screen of Green Technique, a 2′ x 4′ grow tent or a 4′ x 4′ grow tent would be a better choice than a 2′ x 4′ grow tent.

How many plants can go under 600w LED?

The yield of 2 month plants should be around 40g per plant, which means that with roughly 9 plants, you’ll be able to cover a square meter with ease and receive up to 400g per 600w light. 3 month autoflowering plants, on the other hand, grow significantly larger, thus you should only plant four of them per 600w bulb.

Best LED Grow Light for 5×5 Tent in 2021 For Indoor Growers

Growing plants indoors may be a pleasant experience if done correctly. However, in order to guarantee that your plants receive the appropriate quantity of light, you must use the best led grow light for 55 grow tent. When looking for a full-spectrum light, it’s important to consider the value for your money. When compared to traditional lighting, LED lights are more energy efficient. As a result, they generate less heat and create less noise. In addition, you may measure a wide range of wavelengths and colors using this instrument.

  • They can generate excessive heat, necessitating the need for cooling.
  • However, finding the appropriate size of a grow tent does not have to be difficult.
  • First and foremost, you must choose the quantity of plants you intend to produce.
  • Additionally, depending on the sorts of plants in the grow tent, you may vary between the red, blue, and yellow spectrums of light.

Some brands provide accurate PAR readings, but others do not do so. You’re seeking for LED lighting that has a specified color spectrum, right? If that’s the case, this tutorial is for you. The following are the finest led grow lights for a 55 grow tent, according to our research.

Best Led Grow Lights for 5×5 grow tents

IPower is a full-spectrum LED light that was created specifically for indoor gardeners. In addition, it has a simple hanging rope for displaying in your grow area.

Growth stages

This device is appropriate for all phases of plant development (vegetative, blooming, and flowering). It uses 3000k reddish light, 660 nm red light, and 750 infrared light to accelerate the blossoming and flowering stages of the plant.

Dimmable button

This item is fitted with a dimmer knob, which allows you to adjust the brightness level more easily. You receive the best possible performance at each stage of growth. Not to mention that the light intensity may be adjusted to fulfill the demands of plants at different stages of growth. The dimmable driver may be removed from the grow tent in order to reduce the amount of heat generated.

Coverage area

Unlike typical bulbs, iPower has a blooming stage size of 6 x 6 feet, whereas traditional bulbs have a footprint of 4 x 4 feet. However, this does not rule out the possibility of it becoming extremely effective. It draws 600 watts of power, which is sufficient to illuminate the entire area. These LEDs illuminate the whole space, ensuring that plants develop in a regular manner. Furthermore, because of the concentrated light, plants are able to utilize more than 95 percent of the energy generated.

Solid construction

The heat dissipation capabilities of the well-constructed aluminum sink are excellent. It is not necessary to add external fans in order to achieve completely silent operation. In contrast to comparable versions, this unit will produce a high level of power without overheating the LEDs.

Water resistance

The IPX6 grade of the row light ensures that it is resistant to moisture and vulcanization.

Pros

  • LED lights are extremely durable. It is made of high-quality materials. There is no requirement for external fans. The yield produced is of superior grade. demonstrates complete silence during the performance
  • When it comes to the seedling, blossoming, and flowering stages, the dimmable mob gives for greater flexibility. Installation without the need of any tools
  • The set-up is a tough experience. It is backed by a substantial warranty. You will receive everything you require to successfully grow your plants, including a hanging kit and a power wire. This product has a useful life of more than 50,000 hours.

Cons

  • There is a limited coverage area
  • The power of LEDs is modest
  • They are also quite pricey.
CLick Here To Buy Now

This LED growth light, which is manufactured by VIPARSPECTRA, one of the most reputable companies in this area, offers all of the power you need as well as a slew of unique features that you won’t find anywhere else. Whatever your experience level with indoor gardening is, or if you’re just getting started, this light is just what you’ve been searching for. Let’s start with the output of this LED growth light, which has a lot of functions and is really powerful. As you might have guessed from the name, this device has a maximum output of 1350 Watts.

  1. Not only that, but the high wattage guarantees that your plants receive a enough amount of illumination.
  2. You should have no trouble keeping this on for the amount of time necessary to ensure that your plants develop appropriately.
  3. This enables you to reduce the intensity of the lights, resulting in a reduction in power use.
  4. Because plants require a spectrum of light to commence photosynthesis, a complete spectrum LED grow light is required to fully qualify as the best LED grow light for a 55 tent.
  5. There will be none of that low-cost dual-spectrum lighting.
  6. In 2021, the best LED grow light for a 55 tent will be determined.
  7. This is quite normal, but it wastes energy and effort.

This is accomplished by the use of aluminum, which directs the light back in the direction in which it was originally directed.

You have the option of selecting either bloom or grow, or both.

You are always welcome to put on both at the same time in order to encourage the most development.

The accompanying hanging kit is simple to use, and you can have the light up in minutes after putting it together.

The device weights around 27 pounds, which should be readily supported by the majority of tents.

This one, on the other hand, includes a display and a knob that allow you to easily adjust the brightness and regulate a variety of other settings with ease and precision.

You’ll like the remote control that comes with this light, which makes controlling it a breeze.

Do you want to adjust the brightness?

Do you want to alter the spectrum?

All of the features can be controlled without ever having to touch the lightbulb itself.

The heat generated by these lights will be easily dissipated by the six fans installed throughout the room.

They are not only extremely effective at removing heat and keeping both you and the unit safe, but they are also quite quiet. You can use this in your tent and barely notice it is there, which is always a plus.

Pros

1350W of total power output means it will have no trouble lighting a 55 tent and is thus the finest LED grow light for 55 tent. Utilizes a remote control, which enables you to adjust everything without ever touching the light or stepping foot inside the tent-Comes with an extensive list of features, including full spectrum lighting, bloom and growth channels, dimmable lights, and much more.

Cons

The machine requires somewhat more power than other comparable units (620W), but the difference isn’t that significant, and the added functions make up for the higher power consumption.

03.MARS HYDRO TS 3000W LED Grow Light

For people who want to mimic real sunlight for a reasonable-sized plot of plants (specifically 5′ x 5′ of plants in the vegetation stage and 4′ x 4′ of plants in the blooming stage), the Mars HYDRO TS 3000W LED Grow Light is an excellent choice. It can be used to grow a variety of plants in the vegetation stage and in the blooming stage. The advantages and disadvantages of this particular lighting system will be discussed in this evaluation.

PROS

Warm white light (3000K) is used to preserve and retain the color of the plants. In order to enhance plant development, use blue light (5000K). In order to encourage your plants to flower healthily, use RED light (660 nm). In order to assist your plants bloom and prosper, use IR light (760 nm).

2. Aluminum Hood to Optimize Heat Distribution and Light Reflection

The design of the aluminum hood serves a number of purposes. First and foremost, it contributes to the prevention of overheating of the grow light itself (though it will still be warm to the touch) by spreading the heat across the other layers of the lighting system. For the second reason, the layering and design themselves assist in concentrating and utilizing light so that it is not squandered, hence increasing usage for the plants themselves.

3. Easy to Set Up and Hang

In addition to the two hangers that come with the grow light, you can purchase an extra set for a low cost of $7.99. However, the grow light is also pretty adjustable, and it can be hung up just as simply with paracord or other hangers if that is your preferred method of hanging it.

CONS

In the end, it shouldn’t make that much of a difference to the outcome. Due to the fact that you are not going to be utilizing this item outside and there is no logical way that you should be able to spill something on it, the only way this may become a problem is if you had a sprinkler system installed. It is possible that this lighting system might be damaged if there was a fire or a sprinkler system malfunction that caused the system to become wet. If that were the case, though, it’s likely that you’d be preoccupied with a number of other, more serious issues.

2. No Fan – Also a Pro

This shouldn’t make that much of a difference in the long run, though. Because you’re not going to be using this item outside, and there’s no logical way you should be able to spill something on it, the only way this may become a problem is if you had a sprinkler system installed on your property.

It is possible that this lighting system might be damaged if there was a fire or a sprinkler malfunction that caused it to become wet. If that were the case, chances are you’d be preoccupied with a number of other, more serious issues!

Our Opinion:

This is, in our view, the best LED grow light for 55 grow tents on the market. It has received overwhelmingly positive feedback, with 4.5/5 stars on Amazon and over a hundred delighted buyers. In the evaluations, customers express satisfaction with their plants’ quick improvement following the installation of the MARS HYDRO TS 3000W LED Grow Light, and they also express satisfaction with the ease with which they could modify the configuration if they want. This grow light is highly suggested for indoor use, especially in grow tents.

Click Here To Buy Now!

With LED lights for your grow tent, there are already a lot of considerations: how big do you want it to be? What kind of lighting do you want? Should I purchase one that includes a fan? In order for my plants to thrive, what sorts of lighting are required? And, finally, how many LED watts are suitable for the plants that I am now growing? The answer to that final question will be heavily influenced by a number of factors, the most important of which are as follows: What kinds of plants do you have in your garden?

This post will cover the essentials for a 5′ by 5′ grow tent and everything you’ll need to put up.

Plant Type

Flowering plants such as tomatoes, peppers, and even root crops are classified as High Light plants, which means that they require a large amount of additional sunshine (or sun-mimicking light) in order to survive and produce flowers. Unlike Low Light plants, these plants will require a greater wattage since they require significantly more energy than plants that remain in a green or non-flowering condition, and this energy is stored in the fruits of the plant. For a 5′ x 5′ area, high-light plants in the blooming stage can demand as much as 1800 watts of light during the flowering period.

See also:  How To Keep Your Tent Safe While Camping

Low Light Plants (i.e. Leafy Greens)

As a result of the fact that they will not develop fruit, leafy greens including spinach, lettuce, kale, and chard are classified Low Light plants. As a result, they use substantially less light energy than plants that do yield fruit. A grow tent of 5′ x 5′ should be used to treat low-light plants, which should get a maximum of 450 watts of light per square foot.

General Rule of Thumb

However, the aspect that will make the most difference in how much LED wattage you require is whether or not you are growing High Light or Low Light plants. There are a variety of other considerations to bear in mind as well. Other than that, the basic rule of thumb to follow when determining how many LED watts you require for your grow room is as follows: Low Light plants require around 50 watts per square foot of grow space (i.e. 1′ x 1′ = 50 watts, 2′ x 2′ = 200 watts, 5′ x 5′ = 1250 watts, and so on) to thrive.

If you require more information or have plants that are particularly specialized to your environment, we recommend that you conduct more study on your specific conditions.

You May Like:⇓

For the first time, you’re learning how to put up a grow tent. Making the conversion from high-intensity discharge to LED grow lights? In either case, it’s critical to select the appropriate LED grow light for your tent size. LED lights provide a significant benefit for both you and your plants when you choose to utilize them. In fact, LEDs are the only lights that are capable of supplying plants with the precise light spectrum they require during the whole growth cycle. These lights, in addition to providing the finest quality of illumination, consume the least amount of energy to operate properly.

The full benefits of LED grow lights, on the other hand, are not available if the fixture you pick is not appropriate for your grow tent.

Step 1: Establish Whether Your Grow Tent is for Veg, Flowering, or Full Cycle Growing

Do you have a vision for how you want your grow operation to be set up? Do you intend to move plants between a specialized veg tent and a blooming tent during the growing season? Alternatively, do you want to keep your crop in the same enclosure during its whole harvest cycle? This is an essential question for a few of reasons. First and foremost, the response informs you of the sort of LED light you require. If your plants will be growing in this tent for the rest of their life, you may wish to invest in a variable spectrumLED that lets you to modify the light spectrum between each phase of growth and development.

Second, plants in the vegetative phase require approximately half the amount of light intensity that they require during the blooming phase.

Step 2: Decide How Many Plants You Plan to Grow In Grow Tent

It is not only about the size of the tent that you should consider when selecting the appropriate lighting for your grow tent. It’s also about the size of the canopy and how well it occupies the available area. Plan on providing at least one square foot of space for each plant if you aren’t sure how many you will be cultivating. Allow adequate room for your crops to spread out and become wide and bushy. When the plant begins to blossom, you will be in a great position to harvest large quantities of fruit.

Every LED grow light should include easy-to-find specifications on its product page, just like any other electronic device.

Step 3: Estimate How Much Wattage You Need for Your Square Footage

We’ve included this step since it’s one of many considerations to examine, but it’s not a hard-and-fast rule, and it should be treated as such. We’ll start by sharing a common rule of thumb, and then we’ll explain why you should use caution while using it. According to conventional wisdom, you should aim for 32-50 watts per square foot of growing space. If your grow place is a specialized veg tent, you’ll need something closer to 25 watts. Using this example, if you’re dealing with an area of three by three feet, you’d potentially require an LED light with a power demand of somewhere in the range of 225 watts (vegetative) and 450 watts (hi-intensity) (flowering).

The difficulty is that watts don’t tell you anything about the quality or intensity of light produced by a fixture, only its quantity.

Top-tier LED lights are incredibly energy-efficient and can generate an equal spread of high-intensity light while using only a little amount of electricity.

This lamp, on the other hand, has a PPFD rating of 800 and covers a coverage area of 3′ x 3′. And if none of it makes sense to you, don’t be concerned about it. We’ll go over it in more detail in Step 4.

Step 4: Compare PPFD Levels of LED Grow Lights

You may obtain more in-depth information about PPFD measurements by visiting this page. In the meanwhile, we’ll try to make things as simple as possible. The photosynthetically active radiation (PAR) transmission factor (PPFD) informs you how much photosynthetically active radiation (PAR) really reaches the canopy from a certain hanging distance. Here, we’re talking about the amount of useable light that makes its way from the bulb to the foliage. Follow these steps to grow plants that are healthy and flavorful:

  • Seedings and clones require 200-400 PPFD
  • Vegetation requires 400-600 PPFD
  • Budding and blooming require 600-900 PPFD
  • And fruiting requires 900-1000 PPFD.

Understandably, it is necessary to select whether you want to commit your grow tent to a certain stage or to the complete cycle before you begin. When reviewing the characteristics of an LED grow light, be certain that the light can deliver the following benefits:

  • The PPFD level required by your plants
  • It should have a broad enough covering area to guarantee that the entire canopy receives sufficient quality light.

It is also crucial to note that the PPFD of your lights is dependent on the height at which they are suspended. The quality of the light declines as one moves further away from the bulb. It is possible to measure the quantity of PAR that is available at a certain distance from the fixture using a PPFD measurement. When you look at the PPFD specifications, make a note of the distance at which the measurement was obtained. For example, the 200-watt SolarXtreme 250 has a 500 PPFD at 18″ and weighs only 18 pounds.

  • When deciding on the best LED grow light for your tent size, remember to take into account more than simply square footage when making your decision.
  • Don’t be fooled by low-cost lighting options.
  • To note the fact that having some assistance while erecting a tent for the first time is quite beneficial.
  • Please let us know if there is anything we at California Lightworks can do to assist you in getting started.

How Many LED Watts Are Required Per Square Foot of Grow Space?

*This article was last updated in May 2018. Are you a newcomer to the world of LED cultivation? If this is the case, the charts below will assist you in determining how much energy (measured in watts) your plants require to blossom. Disclaimer: Wattage is a legacy of the days of high-intensity discharge (HID) lamps (MH and HPS). The coverage area of a fixture or the utility of an LED grow light should not be determined by the wattage of the fixture or the LED grow light. Using wattage as a simple technique of estimating the optimal fixture size for your grow should be limited to the most basic of situations.

PPFD (and spectrum) are essential components of a good grow when used in conjunction with the appropriate spectrum for your plant type and development phase.

The term “wattage” in this article refers to the amount of electricity that is pulled from the wall, not to the amount of electricity that is drawn from the LEDs, which is normally the product of the maximum LED wattage multiplied by the number of LEDs specified by the manufacturer.

For example, a 900 watt LED grow light would be made up of 300 x 3-watt LEDs. The LED grow light, on the other hand, may only consume 500 watts when connected to the wall.

Grow variables

It is critical to note that the amount of actual watts that you will use for your grow will vary based on the following factors:

  • Plants that require a lot of light, such as tomatoes, peppers, and other vegetables
  • Plants that require little light, such as herbs and leafy greens (such as basil lettuce)
  • There is a significant difference in the quantity of light required by seedlings, vegetative, and blooming plants.

Watts per square foot

For blooming, the typical LED grow lamp consumes around 32 watts to cover 1 square foot. This is in stark contrast to a conventional HID lamp, which consumes 40 watts per square foot (assuming a 5′ x 5′ space or a coverage area of 25 square feet). The use of a HID in a 4′ x 4′ area will increase the power coverage to 62.5 watts per square foot (psf). (The energy savings that growers may expect from employing LED grow lights instead of high-intensity discharge lights is around 38 percent.) This energy savings figure solely includes the savings that farmers realize as a result of utilizing LED lighting fixtures.

For example, depending on the size of the setup and the temperature of the surrounding environment, less ventilation and air conditioning may be employed, or it may be altogether avoided.

More energy-efficient LED grow lights will consume fewer watts to produce the same amount of light that a less energy-efficient LED grow light would provide.

LED Wattage Chart Explanation

The wattages indicated below are based on the assumption that you are blooming your plants. If you’re growing vegetables, you might want to consider reducing your wattage by 50% because vegging plants only require roughly half the amount of light that flowering plants do. As is always the case, following the manufacturer’s advice is the best course of action.

Using the charts

The following columns will be included in each of the charts:

  • Plants to be cultivated in a certain area The area covered by a certain number of plants in terms of square footage
  • The recommended LED wattage is based on the quantity of plants being grown in the given space.

Wattage charts

For blooming, assume a wattage of around 32 watts per square foot (real LED wattage). Smaller yields may be associated with lower wattage, whereas bigger yields may be associated with higher wattage.

Quick Guide (watts per coverage area)

of Plants Square Feet Wattage from Wall
1 1 30 to 40 watts
2 2 60 to 80 watts
4 4 120 to 140 watts
6 6 180 to 200 watts
8 8 240 to 300 watts
10 10 300 to 340 watts

Recommended wattage assuming 2.0 sq ft/plant

of Plants Square Feet Wattage from Wall
1 2 60 to 80 watts
2 4 120 to 140 watts
4 8 240 to 300 watts
6 12 360 to 400 watts
8 16 500 to 650 watts
10 20 600 to 800 watts

Recommended assuming 4.0 sq ft/plant

of Plants Square Feet Wattage from Wall
1 4 120 to 140 watts
2 8 240 to 300 watts
4 16 500 to 650 watts
6 24 700 to 860 watts
8 32 900 to 1100 watts
10 40 1100 to 1400 watts

Shop LED Grow Lights ›

Related:What is the difference between PAR, PPF, DLI, and Efficacy? It is important to understand the light factors that affect your indoor plants. Consider these additional factors before choosing an LED grow light.Please keep in mind that the growing of certain plants may or may not be allowed in your individual region or nation. Related:See what else you should consider before purchasing an LED grow light. LED Grow Lights Depot does not advocate or condone any unlawful conduct, and we urge each person / user to become familiar with the applicable laws in their own region or nation before engaging in it.

Leave a Comment

Your email address will not be published. Required fields are marked *