What Glue For Tent Stove Jack

What Glue For Tent Stove Jack

Car camping is the best choice. A few words about the test: it’s simple! With plenty of space for four people, storage pockets, and a large entrance, it’s a breeze to live in this apartment. ($110) is a budget-friendly purchase. The setup is additionally straightforward, as implied by the name. The four half-poles, which are permanently attached at the apex of the tent, slip into a massive junction box and are then snapped into big connection points at the corners of the structure. Among the most straightforward installations we’ve seen, it was completed in minutes by a pair of ten-year-olds.

A partial fly over the top, extremely water-resistant walls, and a reinforced floor ensured that everyone remained dry even during a torrent of rain.

Coleman.com weighs 9.7 lbs.

A few words about the test: it’s simple!

  • ($110) is a budget-friendly purchase.
  • The four half-poles, which are permanently attached at the apex of the tent, slip into a massive junction box and are then snapped into big connection points at the corners of the structure.
  • Sure, it’s a little hefty, and there isn’t a vestibule, but it does its most important duty.
  • Verdict: This is proof that camping does not have to be an expensive endeavor.
  • 4.5 out of 5 stars for liveability 3 out of 5 for toughness (Michael Karsh)

Can you put a stove Jack in any tent?

Using the Luxe Stove Jack kit, it is feasible to install a wood stove in practically any steep-walled shelter or even an outfitter-sized tent, ranging in size from 2 to 16 people. Works with ripstop nylon, silnylon, canvas, and various types of tent materials, among other things.

What is a stove Jack for a tent?

Installation Instructions for a Tent Stove: A Comprehensive Guide When camping in cold weather, wood-burning tent stoves are a safe and effective method to heat a canvas tent quickly and efficiently. In tenting, stove jacks, also known as flashings, are heat-safe exit locations that allow the flue pipe of a tent stove to be extended through the tent’s roof or sidewalls.

How do you fireproof a canvas tent?

How to Make Canvas Tents Fireproof Warm, soapy water should be used to clean your canvas tent.

You may get a fire retardant spray from a store such as National Fireproofing or DTW Flames at a reasonable price. Check the label on the bottle to be sure the product is appropriate for use with a canvas tent before using it. Place the tent on the ground, flat on the ground, in an open area.

Can you get carbon monoxide poisoning from a camping stove?

It is possible to become ill from carbon monoxide poisoning if you use any device that runs on gas, wood, petrol, oil, kerosene, or diesel. Camping stoves and fuel-burning lanterns, as well as refrigerators, heaters, generators, and any other fuel-burning equipment, fall into this category.

Where does the stove go in a bell tent?

Putting your stove in the centre of your tent ensures uniform heat distribution throughout the tent, and there will be more flue within the tent, making it simpler and faster to heat the tent up in the morning. In the event that you enjoy cooking, this may be a convenient area to set up a chair near to the stove when you’re preparing a meal.

How do you make logs burn slower?

Build fires using the top-down strategy to ensure that a fire is sluggish to spread from the beginning. Rather of burning extremely dry wood, use wood with a moisture level between 15 percent and 20 percent, which is the optimum range for firewood. When building a fire, try to utilize hardwood logs rather than softwood logs to ensure that the fire burns for the longest amount of time.

How do you heat a tent?

Methods for heating a tent in the absence of power Hot water bottles may be used to heat your tent. The tent is kept warm with the help of heating rocks. Make sure your tent is well-insulated. Set up your tent on top of a campfire to keep the bugs away (after the fire dies) Use an electric blanket to keep you warm throughout the winter. Carpets for underfloor heating that may be used with your tent. Portable electric heaters are available.

Can you use a wood stove in a nylon tent?

Keep in mind that if a nylon tent catches fire, it may act similarly to napalm. Of course, all tents have the potential to catch fire and burn, but nylon is very flammable and can melt. For dry heat, there is nothing better than a wood burning stove.

What is stove Jack?

When used with a tent stove, the Exit I Mini Stove jack is a heat-resistant modular flashing that can be installed on the roof or side wall of any canvas tent to allow the flue pipe to be vented. The stove jack is constructed of stainless steel and galvanized rubber to firmly hold hot flue pipe sections at a safe distance from the canvas. It is available in two sizes.

How do you keep a tent stove burning all night?

Tips for Keeping a Wood Stove Burning Throughout the Night Move the charcoal to the front of the wood stove by raking it in a circular motion. To create a compact arrangement behind the coals, arrange five to seven huge logs in a tight shape. Close the door and take it easy.

How hot can a tent stove Get?

That appears to be about correct, in my opinion. 60-70 degrees Fahrenheit in subfreezing temperatures. If the temperature is above freezing, you may simply warm yourself up by sleeping on top of your bag.

How do you light a fire in a tent?

Begin by placing the smallest pieces of kindling you have on either side of the piece of wood that has been planted in the ground, creating a tent shape with one side left open, as seen in the photo above. Build a few levels of the lean-to by stacking increasingly large pieces of kindling on top of one another. To get your fire started, light the tinder inside the teepee with a match.

Can you cook inside a bell tent?

Because most bell tents are equipped with a stove hole, it is necessary to carry your own cooking stove so that you may prepare your own meals while camping.

If you intend to prepare your own meals, don’t forget to bring the necessary pans, glasses, silverware, and plates.

Are Bell tents warm?

They are warm, comfy, and waterproof. They are also simple to put on and take off thanks to a zip.

Do camping stoves give off carbon monoxide?

When used in a tiny tent, kerosene camping stoves do emit carbon monoxide (CO). It is high enough that after 120 minutes in the tent, the COHb levels in the venous blood are big enough to induce complications.

What are stove Jacks made of?

The fabric of the stove jack is often composed of a fiberglass silicone fabric, which is extremely heat resistant and can withstand extremely high temperatures.

Can you have a fire in your tent?

The use of wood burning stoves is not permitted in all types of tents. The tent will normally be made of canvas or poly cotton since they are durable, highly ventilated, and do not burn quickly when exposed to the elements.

Why does my wood stove burn so fast?

1. The air vents are open to an excessive degree. It is possible that the air vents on a wood stove are left open too much, which is one of the primary reasons why wood burns so quickly. It is possible that if you leave the air vents on your wood stove wide open, the considerably increased airflow inside the stove will cause your fire to burn through the wood more quickly.

Are tent stoves safe?

The extreme heat generated by one of Wall Tent Shop’s wood stoves will cause any flammable materials in the immediate vicinity to explode. Try to store aerosol canisters such as bug spray, hairspray, or any other aerosol product on the opposite side of the tent.

How to Install a Tent Stove Jack

In the immediate vicinity of a wood burner from Wall Tent Shop, any flammable material will spontaneously fire. Maintain a safe distance between the tent and any aerosol cans, such as insect spray or hairspray.

Video Guides to Installing a Tent Stove Jack

Learn more about tent stoves in our Tent Stove Buyers Guide: The Complete Guide to Buying, Owning, and Operating a Portable Wood Burning Tent Stove, which is available for free download.

Can You Put a Stove Jack in Any Tent? – 2021 Complete Guide

Having a camptenting experience throughout the winter and freezing weather is an unforgettable experience. However, it is tough to deal with the frigid temperatures. In order to survive in cold weather, it is necessary to keep both the tent and oneself warm. Even if you dress in many layers of clothing and utilize a specialized sleeping bag, it will not be enough to keep you warm in the cold weather. The stove jacks may be used to keep a tent warm, but a canvas or polycotton tent with a chimney is all that is required for installation.

See also:  How To Set Up Fan In Grow Tent

In the event that you’re concerned about the amount of smoke it releases, there’s no need to be concerned.

You must first learn how to securely place a stove jack within the tent in order to enjoy this great cozy experience.

Using a woodburning stove in any tent?

Realdealfinders.com is the source of this information. Stove jacks are extremely safe to use in a polycotton or canvas tent, which creates a warm and welcoming environment for the campers.

Depending on how well they are installed, they might be hazardous to your health. It is necessary to understand how to install them in order to ensure a safe and viable installation. Before you place it in a tent, you must also adhere to the safety precautions in order to achieve excellent outcomes.

Fire Precautions

When installing a stove jack, you must take the following safety precautions to avoid a fire.

  • First and foremost, it is preferable to roll up the groundsheet and place the stove jack directly on the ground. The stove jack may be able to escape fire ashes, which might cause the mat to burn. You’ll need a spark arrester to keep sparks from landing on the tent and to keep it from catching on fire if something goes wrong with it. Now, remove the most vital items from the vicinity of the stove since they will become hot
  • It is necessary to maintain a fire extinguisher on hand in case of emergency.


After you have taken the necessary measures, you will need to assemble the equipment and supplies that will be needed to install a stove jack in a tent. As a starting point, you’ll need a worthycanvas tent, two adjustable wrings, a sharp knife, an electric stovejack, a pencil, and a chimney flue. Second, all you require is someone to provide a hand. If you plan to use the new branded tents, you will need to burn them for many hours before you can use them again. The burning process will allow the stove jack to eliminate all of the chemicals and oils that were left over from the manufacturing process.

Choosing Stove Placement

CanvasCamp.com is the source of this information. Selecting a suitable location for the stove jack should be done after everything has been assembled and is in place. You must first determine the temperature and the difference in environmental conditions before making the order. If you install the heater in the appropriate location, the tent will be heated equally by it. Place the bigger area in the centre of the tent if you want the entire area to be heated. Particularly in cold weather, the stove jack’s center location is the most convenient position to have.

Cutting and Disassembling

Following the selection of the most appropriate location for a stove jack, it is necessary to carefully fit the flue pipe. Stove jacks that have already been placed may be a challenge when attempting to place the stove inside the tent. You’ll need a sharp knife to cut the rubber to the appropriate size for the stove, ensuring that it fits perfectly around the flue pipe. You must now completely remove the stove jack in order to use the ring as a stencil as soon as possible.

Cutting of Bolt Holes

Make a mark on the cooktop where the flue pipe will be installed. Place the metal ring around the stove, followed by the flue pipe exit locations, then use the pencil to mark the precise areas where the stove will be cut. Make small holes with the knife to allow the bolts to slide through them more easily. However, do not cut the holes at this time; you will have to do it later.

Installing the Stove Jack

It is necessary to secure the stove jack metallic area with the bolts from the outside of the tent by pressing it against the fabric. With the nuts, attach a second metallic ring from the interior of the tent to the first. Using the wrenches, tighten the canvas between the metallic rings until it is completely enclosed. As much as you can, tighten the seal between the nuts together. You may also add glue or wax to make the project last longer and be safer. After it has been placed, you will need to cut a hole in it for the flue pipe to be inserted.

Fire up the Stove Jack

Cut the hole for the flue pipe that you have previously outlined with a pencil so that it can be installed.

The flue pipe should be inserted in between the metallic rings before assembling and burning the stove. During the frigid nights, light a fire and relax in the warmth and comfort of your home.

Cheap Tents with Stove Jack

During the winter, heating a tent may be extremely difficult and time-consuming. People usually build a wooden fire outside their tents just to be on the safe side. A stove jack is required for a hot and comfortable tenting experience in order to solve the problem of heating your tent. However, there is the issue of selecting a tent, for which there is a wide selection of tents accessible. People are mostly looking for the most dependable and reasonable tents with a stove jack that are the most convenient to use and are affordable.


Homecamp.com.au is the source of this information.

Can you add a stove Jack to a tent?

Yes, it is possible to install a stove jack to a tent since it offers a pleasant and hot experience in cold and windy environments. They are completely safe to use because they are made up of smoke that escapes from the flue pipe.

What tents can I put a stove in?

Yes, it is possible to install a stove jack to a tent since it offers a pleasant and hot experience in cold and windy weather. Smoke flowing from the flue pipe ensures that they are completely safe to use.

Is it safe to use a stove in a tent?

Using a stove inside a tent is a risky proposition. A good ventilation system is required for the safe operation of a stove. The stove tent must be placed once the necessary safety procedures have been followed, as described above.


By incorporating the stove jack into the canvas and polycotton tent, you can now relax and enjoy yourself even more. Heat is a fundamental necessity, and it is required for cooking food as well as keeping a tent warm. Place the stove jack inside the tent and connect the flue pipe to allow smoke to escape for a more comfortable experience. Follow the fire safety precautions instructions to the letter and enjoy a warm and relaxing experience during the cold weather. Forget about the weather and take advantage of the stove jack’s heating capabilities while inside a tent!

Canvas Tent stove jack

I’ve had a lot of success with this. When you buy a gallon of Fleetit from Mills Fleetit, it smells terrible when you first apply it. Do not use it in an enclosed location unless you need to kill cockroaches at the same time. It was ice fishing popups and primarily their skirts that brought me the most success – not tents, by the way. — – Anything manufactured of waterproofers should be treated with care (PTFE) When spraying this substance with a cheap pump-up sprayer or spray container, use gloves and a mask to protect yourself.

Once this garbage gets into your system, you’re trapped with it – literally – for life.

extinguisher (fire extinguisher) Foaming systems are formed of the same “teflon” chemical family, and now scientists are discovering massive plumes of it in the groundwater beneath every location where foaming systems were employed for accident prevention, training, and other purposes.

– – – – – – – – – – – – – – – – – Firefighters unintentionally sparked a multi-million dollar groundwater probe that will cost millions of dollars in the future.

If individuals focussed their efforts on the truly essential aspects of life, there would be a scarcity of fishing poles. Doug Larson is a well-known author.

How To Install A Stove Jack Flashing Kit On A Canvas Tent

That is an excellent question. In the event that you’re already the proud and content owner of a canvas tent, you’re about to become even more proud and content once you’ve outfitted your canvas tent with a wood burning stove to keep warm and a flashing kit to protect your tent by keeping out rainwater and providing additional stability against the wind. If you possess a canvas tent from Life inTents, you’ll see that your tent comes with a stove jack and a 3″ pipe exit hole already attached (which can be enlarged up to 6″).

It’s a rather straightforward task, especially if you have a friend who can assist you with it.


Learn how to install a wood stove flashing kit into a canvas tent so that it may be used with a wood burning stove by following this article. The tent stove and flashing kit included in this set-up should be compatible with the vast majority of canvas tents. **SAFETY RECOMMENDATIONS: Always adhere to the recommended tent positioning supplied by your chosen wood stove manufacturer. Place a fireproof pad under the stove, clear out the flue pipe on a regular basis, install a carbon monoxide detector on the floor, and think about purchasing a wood stove thermometer, among other safety precautions.

See also:  What Are Tent Poles Made Out Of



  • A pencil or a pen is required. a knife blade that is razor sharp
  • Two wrenches, sockets, or plier/s
  • Two pair of scissors
  • Two pair of plier/s
  • Two pair of plier/s The part of stove pipe that leads out
  • The assistance of a friend (which is not essential, but can be beneficial depending on the friend)


  • A stove jack flashing kit, such as the one seen below
  • A bell tent made of canvas, such as these
  • A wood-burning stove, such as the one seen above

A description of the specifications:This particular stove jack flashing kit is comprised of silicone and stainless steel and is capable of withstanding stove pipe temperatures as high as 455°F.

  • With the six nutbolt sets that come with the kit, the dual stainless steel rings secure the flashing. Adjustable to suit stove pipes ranging from 2.5″ to 6.25″ in diameter
  • The outside diameter of the metal ring is 9.5″ and the inner diameter of the metal ring is 7.25″
  • The total weight of the metal ring is 1.5 lbs.

Here’s what your stove jack flashing kit will look like when you’ve completed the installation process successfully. Isn’t this something special? THE INSTALATION OF THE SILICONE FLASHING Ready? Let’s get in shape! In order to ensure that the silicone flashing is perfectly sized for the flue pipe, use these steps to cut it:

  1. A portion of the flue pipe should be inserted into the silicone flashing outlet
  2. Fold the silicone into the flue to assess the amount of material that will need to be removed
  3. Cutting silicone to the correct diameter can be accomplished with a box knife or scissors

STOVE JACK FLASHING KIT INSTALLATION GUIDELINES Having cut the silicone flashing to size, locate that hopefully helpful friend of yours and let’s get this thing fitted! The first step is to take out all of the nuts, bolts, and washers from the flashing and lay them aside in a secure location. INSTALLATION STEP 2: From within the tent, push the exit pipe into place at the selected installation site. Make a pencil mark around the circle of the stove pipe on the canvas inside where you want the pipe exit to be situated.

  1. Mark the locations of each bolt on the metal ring with a pencil or pen.
  2. STEP 5 – Locate the nuts and bolts that you had previously stored carefully.
  3. Insert a washer and a bolt through the metal ring and the gasket to complete the installation.
  4. The long side of the bolt will now be inside the tent, while the short side will be outside.
  5. STEP 7 – From the inside of the tent, attach the washer and nut sets to each of the six protruding bolts using the hex wrench.
  6. This is where that buddy can really shine and make a difference.

Even if you are working alone, you may be able to reach up and outside to hold on to the bolt with one hand while tightening with the other if you are able to reach up and outside to grasp on to the bolt with one hand while tightening with the other (particularly if you have walls that roll up for easier access).

So, what do you do now?

After that, connect the pipe portion to your wood stove using the appropriate fittings.

In order to ensure that your pipe part outside the tent is at least 15″ above the fire retardant canvas, you need install it at least 15″ above the ground.

Now go ahead and relax with your feet up and take it easy. A heartfelt thank you to your helpful acquaintance. There are many more seasons of warm and pleasant tent experiences to come. Excellent effort, guys! THE BOOK SELECTION 12th of January, 20228 minutes read

Start A Mobile Glamping Business in 2022

Glamping event providers and backyard glamping enterprises began to spring up in the Wes boroughs in the year 2015. Mobile glamping enterprises are in high demand right now, surpassing their supply, making this a fantastic small business opportunity in your local community. We want to assist you in determining whether or not it is the right moment for you to start your own glamping rental business. THE LIT LIST will be published on January 9, 2022. 6 minutes to read

How to Maintain and Clean a Bell Tent

Canvas tents are extremely durable and may last a lifetime if they are properly maintained. Canvas tents, like keeping a healthy body, may last a lifetime if they are properly cared for and maintained. Here are some ideas to help you clean and care for your bell tent so that you may get the most usage out of it for a long period of time.

Installing stove boot.

Installing stove boot.325142008/24/09
OPCampfire RegularJoined:Feb 2006Posts: 434 I chose the Kodiak flexbow tent because I wanted a canvas tent to have as a base camp when I travel to hunt. I wanted something simple for one man to set-up. I did not want a floor for hunting but since I will be also using this here in TX for taking the grandkido’s camping I felt I needed a floor. So I tried to find the best of both, and hope this will suffice.I will try and post some sequence photo’s to show the installation. The stove is homemade and will see how it works this yr. It is just a larger version of my little pak stove w/ some stuff added here and there for better efficency(sp). The tent is a 10’x14′, and the stove boot is a 5″ oval from Outfitters Supply out of MT, I used Tear Menders glue for the installation. The stove is 12″x24″ w/ a 7′ pipe.This shows the pattern for the boot, and also a good veiw of the side vents;Here’s the boot;The next three show the boot installed, along w/ the stove in place.I’m excited about giving it a try!-Allen-
Re: Installing stove boot.326029308/27/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 Very slick!I’ve seriously thought of a similar type setup.Looks great!Just beware, that tents of that design to move/flex a pretty good amount in high winds.FWIW, a worker for a company that makes a nearly identical tent suggesting putting guys on the top corners to keep the movement down so it didn’t knock over the stove.
Re: Installing stove boot.326032208/27/09
Joined:Mar 2008Posts: 14,621oldtrapperCampfire ‘Bwana
Campfire ‘BwanaJoined:Mar 2008Posts: 14,621 If that tear mender is the same stuff we used to call tehr greeze (white milky stuff), it should be the last thing standing.That stuff was so good, the canvas on an old swather could be fixed with it. (showin my age a little, I know)Nice looking job.

Soli Deo Gloriademocrats ARE the plague.

Re: Installing stove boot.326098108/28/09
Joined:Feb 2006Posts: 434Tx TrapperOPCampfire Regular
OPCampfire RegularJoined:Feb 2006Posts: 434 Pointer, it does have the guy out tabs, thanks for the heads-up.Oldtrapper, it is the milky white stuff.
Re: Installing stove boot.326261708/28/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 Good deal!IMO, that puts Kodiak one leg up on their predecessor.
Re: Installing stove boot.339933110/19/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 Tx Trapper-Just wondering if you’ve gotten a chance to give this setup a try with the stove yet this year?
Re: Installing stove boot.339934510/19/09
Joined:Jan 2005Posts: 54,795rost495Campfire Oracle
Campfire OracleJoined:Jan 2005Posts: 54,795 TX, didn’t see this earlier but looks good!I would also suggest the corner tie outs.Jeff

We can keep Larry Root and all his idiotic blabber and user names on here, but we can’t get Ralph back.Whiskey Tango Foxtrot, over.

Re: Installing stove boot.340142110/20/09
Joined:Feb 2006Posts: 434Tx TrapperOPCampfire Regular
OPCampfire RegularJoined:Feb 2006Posts: 434 Well, I’ll add an update since the trip. The tent was better than expected. It rained or sleeted just about every day or night. Only burned the stove a few times, just wasn’t cold enough but it was nice to have. The glue started to come loose on the stove jack, so when I got back had it sewn in.
Re: Installing stove boot.340779710/22/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 Thanks for the update!If I can find a 10X14 at the right price I plan on trying what you did!Putting up a tent like that is much easier than a traditional wall tent, yet these have much of the same features.
Re: Installing stove boot.340799410/22/09
Joined:Aug 2006Posts: 20,840huntsman22Campfire Kahuna
Campfire KahunaJoined:Aug 2006Posts: 20,840 Wish I had pics to share of the Morapos trailhead the year it snowed so hard. The only tents standing were my outfitters wall tents and 2 old army tents. EVERYTHING else collapsed. From little dome tents to cabin tents like pic’t above. What is funny, the next year the campground was full of camp trailers. As to wind, the Kifaru crew was surprised by my wall tent’s durability in the wind, as compared to their tipi’s. The rendezvous site kinda catches the breeze.With out guy-outs, the springbar and coleman type cabins, just pull up stakes and blow away.
Re: Installing stove boot.341043010/22/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 The snow/wind results make since.IIRC, trapper stated that the Kodiak has guy out points.If the one I bought didn’t have them, it would shortly.
Re: Installing stove boot.341164310/23/09
Joined:Feb 2006Posts: 434Tx TrapperOPCampfire Regular
OPCampfire RegularJoined:Feb 2006Posts: 434 pointer, can’t argue w/ huntsman. I did string a tarp over it before going and it worked well. The top bar made it easy to put on. It does have the guy outs at each corner if needed. Besides the stakes, it is a breeze to put up. We had weather of some sort each night or day and I think it handled it fine. No snow but some hvy slush one night. I used it for early season (sept). I did not like the floor though and am planning on getting a regular wall tent for future trips. But this one will stay for the trips here in TX where a floor is a plus:).
Re: Installing stove boot.341171110/23/09
Joined:Aug 2009Posts: 3,556brinky72Campfire Guide
Campfire GuideJoined:Aug 2009Posts: 3,556 That looks like quite the setup.If you don’t mind me asking what was the price tag?I have a feeling that in the next couple of years it will be just me hunting as my father and uncle are around 75 yoa.So I would need something that is sturdy, warm and one guy can set up.I hunt in snow country along the Lake Superior water shed so it is not unusual to get up to a 18″ of snow on the ground the opening day of deer season.

Keep your powder dry and stay frosty my friends.

Re: Installing stove boot.341251110/23/09
Joined:Feb 2006Posts: 434Tx TrapperOPCampfire Regular
OPCampfire RegularJoined:Feb 2006Posts: 434 Brink, this is where I got mine. They run them on sale at times, plus they sometimes send out coupons for so many dollars off if you spend this much. Might just keep an eye out. I really liked the tent, probably the best I have stayed in. The floor is very hvy and I like all the ventilation for early season. I used a lantern each morning to warm it up and it worked just fine along w/ the single burner stove for the morning coffee. Man I miss being there just talking about it. dex parentId=cat20105 id=0054659
Re: Installing stove boot.341269510/23/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 pointer, can’t argue w/ huntsman. I did string a tarp over it before going and it worked well. The top bar made it easy to put on. It does have the guy outs at each corner if needed. Besides the stakes, it is a breeze to put up. We had weather of some sort each night or day and I think it handled it fine. No snow but some hvy slush one night. I used it for early season (sept). I did not like the floor though and am planning on getting a regular wall tent for future trips. But this one will stay for the trips here in TX where a floor is a plus:).That does it!I’m back on the look out for a wall tent!
Re: Installing stove boot.341293910/23/09
Joined:Nov 2002Posts: 16,838GreatWaputiCampfire Kahuna
Campfire KahunaJoined:Nov 2002Posts: 16,838 Keep an eye on KSL.com. Had a buddy looking for a wall tent a couple months ago and found him a 14×16 Kirkham’s (AAA Tent) complete with rain fly and internal frame for $625.00! The entire package was brand new and has a bunch of extras including double doors with screens, windows on both sides, extended eves, and made of 12oz water/mildew/fire resistant Sunforger material.If I would have known everything it had, he never would have heard about it!.
Re: Installing stove boot.341308210/23/09
Joined:Feb 2002Posts: 12,956pointerCampfire ‘Bwana
Campfire ‘BwanaJoined:Feb 2002Posts: 12,956 That’s a part of my morning routine.
Who’s Online Now
843 registered members (10ring1,160user,12344mag,10Glocks,16penny,01Foreman400, 97 invisible),2,061 guests, and 1,032 spiders.
Key:Admin,Global Mod,Mod

YARN Plus Canvas Hot Tent with Wood Stove Jack 2-4 Person

Canvas tent camping has long been a goal of camping aficionados for wilderness camping, as opposed to tents constructed of silicone nylon and polyester materials, which are more common nowadays. The canvas cotton tent’s material is derived from nature and is intended for usage in the outdoors. Setting up a canopied canvas tent with a stove in the forest will reveal that the combination of canvas tent and natural surroundings is the most suitable. Canvas tents, in contrast to the silicone nylon tents that are available in a variety of colors, are often only available in a single hue.

In addition to being an important raw material for canvas tent production, cotton serves as a strong thermal insulation material.

When it comes to camping, a canvas hot tent is the greatest option if you don’t mind the weight and want something that will last for a long time.

We are continually developing our tipis, which means that the hot tents you receive are the most recent model available.


Capacity 2P withtent wood stoveor 3-4 person
Stove Jack Stove Jack: With heat resisting stove jack (Flame-Resistant Material)
Snow Skirt 6 sides snow skirts
Doors Two opposite doors
Tent Fabric Canvas (70% cotton + 30% polyester)
Waterproof 1500mm+ Waterproof
Tent Shape Regular Hexagon (Side length: 83 in)
Tent Dimension 125.7 sq ft / 11.68 sq m
Peak Height 102.4 inch / 8.53 feet / 260 cm
Weight 18.7 lb / 8.5 kg
Weight with half inner tent 23.2 lb / 10.5 kg
Joint Treatment Seamed
Ventilation Top Vent and Bottom Vent
Packed Size 24.8 x 5.9 x 5.9 in
Color Grey / Khaki
Season 4 Season (Especially in winter)

WHAT’S INCLUDED IN THE PRICE DC anvas sweltering tent Cap that can be moved Center pole is a pole in the middle of the room. Tent pegs are used to hold up tents. Guyline Bag with a zipper made of canvas Half of the Inner Tent (Option) Materials that are resistant to high temperatures (2021 upgrade) It is possible to protect the stove jack from getting scorched by using yellow flame retardant material Cap on the top that can be removed Maintain adequate ventilation in the tent. Fixing points for TWO-IN-ONE and Triangle wind ropes are available.

  • Snow skirt that has been widened, as well as middle reinforcement Improve the stability of the heated tent during inclement weather.
  • Adjustable tent peg fixed points to make the tipi tent more resistant to stronger winds and rain.
  • Bottom ventilation It is beneficial for air circulation.
  • Design with a roll-up buckle Accessible from any location and with autonomous control Corner X-shaped reinforcement is included into the design.

Increase the bearing area of the tent in order to minimize ripping and to improve its overall stability. The zipper is water-resistant. Waterproof performance is improved by using a wider double layer fabric.

How to use the stove jack of our teepee tent correctly?

Some experienced campers may find the following suggestions useful:1. Roll up the jack cover and repair it. Do not allow the jack cover fabric to come into contact with the hot pipes. Ordinary tent material, such as our 300D oxford cloth, is unable to withstand such high temperatures within the pipe. As a result, you must wrap up the cover cloth and place it as far away from the hot pipe as possible. Secondly, check to see that your pipes are centered in the stove jacks. The stove pipes should be placed in the middle of the jack hole, if possible, by shifting the stove’s positioning.

  • 3.
  • Changing the stove position may be challenging for certain people, who may find it difficult to keep the stove pipes from contacting the tent material.
  • 4.
  • Don’t take any chances when you’re putting the pipe in the middle of the stove jack.
  • To ensure that the stove jack fabric lasts as long as possible, it is important to protect it as much as possible.
  • Bringing the tent material too close to the hot pipe may result in burning off of the sewing thread, which might result in damage to the tent.


Regular maintenance of your POMOLY teepee tent will guarantee that it operates at peak performance and lasts for a longer period of time. We share some simple cleaning ideas for the teepee tent in this section. Remove dirt from the tent’s surface using a soft brush, being sure to clean the whole tent, including the snow skirt, the floor mat, and the inside tent. To clean the tent, please use a neutral detergent that does not include bleach. 3. Zippers – To clean the zipper section, use soapy water and a soft cloth.

The use of brushes and other harsh things to scrub the tent will result in damage to its waterproof covering on the outside, which will reduce its ability to keep water out.

Inspect the tent’s attachment points on a regular basis.

When your tent is completely dry and there aren’t any wet areas left, carefully roll or fold your clean, dry tent into a compact package for storage.

Leave a Comment

Your email address will not be published. Required fields are marked *