How To Take Apart Padbeacon Locator Tent - Welcome to Tamborine Mountain Caravan Camping

RBT003 RadBeacon Locator Tent Teardown Internal Photos Appendix B: Photographs of EUT Radius Networks, .

Appendix B: Photographs of an EUT Product: RadBeacon Locator Tent Model: RBT-003 Internal Photos Appendix C: Photographs of an EUT Product: RadBeacon Locator Tent Model: RBT-001 Page 1 of 4 (of 4 total pages) Antenna Page 2 of 4 (included) Page three of four Page 4 of 4 (included)

Document ID	3822394
Application ID	V0GfxbhOQkMv09BjVjDZEQ=
Document Description	Internal photo
Download:
Mirror Download
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	Internal Photos
Display Format	Adobe Acrobat PDF – pdf
Filesize	66.97kB (837170 bits)
Date Submitted	2018-04-19 00:00:00
Date Available	2018-04-19 00:00:00
Creation Date	2018-04-13 11:51:22
Producing Software	MicrosoftÂ® Office Word 2007
Document Lastmod	2018-04-13 11:51:22
Document Title	Appendix B: Photographs of EUT
Document Creator	MicrosoftÂ® Office Word 2007
Document Author:	Sky123.Org

Exif Data from the source: PDF is the file format used. pdf is the file extension for the pdf file type. Application/pdf is the MIME type. PDF Version: 1.5 Linearization: Not applicable 4 pages are included in this report. zh-CN is the language used. Yes, it is a PDF file that has been tagged. Photographs of the EUT are shown in Appendix B. Sky123.Org is the author of this article. Microsoft® Office Word 2007 is the program that created this document. Date of creation: 2018-04-13 11:51:22 Date of modification: 2018-04-13 11:51:22 Microsoft® Office Word 2007 was used as the producer.

RBT003 RadBeacon Locator Tent User Manual Radius Networks, .

Manual de l’utilisateur The RadBeacon Locator Tent has the following model number: RBT-003. In addition to having a tent form factor for prolonged battery life and a waterproof housing, this Bluetooth Smart 5.0 proximity beacon is powered by one CR2477 Lithium battery. The plan is to rebuild the circuits so that they can accommodate a bigger battery. The tent beacon is equipped with an accelerometer, which allows it to extend battery life by activating when the accelerometer detects an incident.

Requirements for the Category Additional Information Bluetooth Low Energy v5.0 Advertising Extensions, GATT Services, and L2CAP Channels are all features of Bluetooth Low Energy v5.0.
Adaptable to different situations Flash memory with a capacity of 512kB This design is based on the Nordic NRF52832 SOC, which is considered a plausible contender.
Adaptable to different situations At maximum tx strength, the range is 100 meters.
Adaptable to different situations Antenna trace or chip, Omnidirectional Sensor Accelerometer, Accelerometer with a trace The motion and fall detection systems were triggered.

The following two requirements must be met in order for the operation to be successful: The device must comply with the following requirements: (1) it must not produce interference; and (2) it must tolerate any interference, including interference that may cause the device to operate in an unintended manner.

This product complies with the technical criteria established by Industry Canada.
The following two requirements must be satisfied before the device may be used: (1) the device must not emit any brouillage, and (2) the device’s user must accept any radiofrequency radiation that is emitted, even if the radiation is capable of interfering with the device’s operation.
In accordance with Part 15 of the FCC Rules, this equipment has been tested and determined to be in compliance with the restrictions for a Class B digital device.
They are not intended to be comprehensive.
There is, however, no guarantee that interference will not occur in a specific installation under any circumstances.
– Increase the distance between the device and the receiving station.
– For assistance, consult with the dealer or an expert radio/TV technician.

Its operation is subject to the following two conditions: (1) this device may not create harmful interference; and (2) this device must accept any interference received, including interference that may cause unwanted operation, as long as it does not cause harm.

Document ID	3822397
Application ID	V0GfxbhOQkMv09BjVjDZEQ=
Document Description	Users Manual
Download:
Mirror Download
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF – pdf
Filesize	7.68kB (95976 bits)
Date Submitted	2018-04-19 00:00:00
Date Available	2018-04-19 00:00:00
Creation Date	2018-04-03 15:14:30
Document Lastmod	2018-04-03 15:14:30
Document Title	Users Manual
Document Creator	WPS Office

Exif data source Data: PDF is the file format used. pdf is the file extension for the pdf file type. Application/pdf is the MIME type. PDF Version: 1.7 Linearization: Not applicable The number of pages is three. Author:Comments: Company: Create Date and time: 2018-04-03 15:14:30+07:14 UTC WPS Office Modify is the author of this work. Date and time: 2018-04-03 15:14:30+07:14 UTC Producer:Source D:20180403151430+07’14’ has been modified. False for the subject and title of the trap.

Radius Networks RBT003 RadBeacon Locator Tent User Manual

One CR2477 Lithium-ion battery powers this BluetoothSmart 5.0 proximity beacon, which has a tentform factor for prolonged battery life and is enclosed in a water-resistant housing. The plan is to rebuild the circuits so that they can accommodate a bigger battery. The tent beacon is equipped with an accelerometer, which allows it to extend battery life by triggering on an accelerometer event. The tent enclosure should be completely watertight in order to allow the tents to be washed inside the restaurant.

Cortex M4 microprocessor (ARM Cortex M4) This design is based on the NordicNRF52832 SOC, which is a probable choice for use in this application.
Flash Memory512 kilobytes of flash memory This design is based on the NordicNRF52832 SOC, which is a likely choice for use in this application.
This design is based on the NordicNRF52832 SOC, which is a probable choice for use in this application.
This design is based on the NordicNRF52832 SOC, which is a probable choice for use in this application.
The motion and fall detection systems were triggered.
Batteries have a life span of 12 months.
Eddstone TLM, EddstoneEID, Eddystone ETLM, Eddystone UID, EddystoneURL, Eddstone TLM, EddstoneEID, Eddystone ETLM User Manual for the RBT-003 Model TenteIC Statement for the RadBeacon Locator This device complies with the license-exemptRSSs established by Industry Canada.

The use of the abbreviation “IC:” before a certification or registration number only indicates that the technical criteria established by IndustryCanada were satisfied.

The current device complies with the CNR of Industrie Canada, which applies to radio equipment that is not need to be licensed.

Statement from the Federal Communications Commission Changes or changes that are not expressly allowed by the entity responsible for compliance may result in the user’s authorization to operate the equipment being revoked or suspended.

These restrictions are intended to give acceptable protection against harmful interference in a home installation.

Radio frequency energy is generated and can be radiated by this equipment.

However, there is no guarantee that interference will not occur in a specific installation in any given situation.

– Adjust the receiving antenna’s orientation or location.

In order to avoid interference with the receiver, connect the equipment to an outlet on a separate circuit than the receiver.

According to FCC regulations, this item conforms with part 15.

The functioning of this device is subject to the following two conditions: (1) this device may not create harmful interference; and (2) this device must accept any interference received, including interference that may cause unintended operation. (1) This device may not cause harmful interference.

FCC Filing Reveals Tasty Hardware McSecrets

If you’ve been to a McDonald’s recently, you might have noticed a little difference in the tone of the restaurant. More and more McDonald’s outlets are turning to self-serve kiosks to accept customer orders, rather than relying on awkward human teens to do it. You go up to the counter, input your order on a massive touch screen, and then proceed to an open table by using an electronic marker. .well, that’s still definitely going to be an agitated adolescent delivering your tray of nutritiousdeliciouscheap food in a matter of minutes.

It turns out that these are Bluetooth Low Energy beacons, powered by the Nordic nRF52832 chipset, and that they incorporate some surprising functions, such as an accelerometer to detect when someone is about to fall.
For a table marker, this one packs quite a punch.
Image of the PCB’s reverse side displays an abundance of labeled test points, and we suppose it wouldn’t be too difficult to figure out how to get one of these table markers to do your bidding if you knew how to do it right.
Although we are curious as to why they require so much hardware to identify which table a certain order should be taken to; it appears that the number written on the body of the gadget would be sufficient to do this.
There’s more to do at your local McDonald’s than just be tossed out of the ball pit again.

RadBeacon – Apps on Google Play

In recent months, you may have noticed a subtle difference in the tone of the restaurant’s voice. McDonald’s restaurants are increasingly turning to self-service kiosks for order taking rather than employing angsty human teens to assist customers. It’s as simple as walking up to a huge touch screen, entering your order, and then walking with an electronic marker to a vacant table. .well, that’s still definitely going to be an agitated adolescent delivering your tray of nutritiousdeliciouscheap food in a matter of seconds.

It turns out that these are Bluetooth Low Energy beacons, powered by the Nordic nRF52832 chipset, and that they incorporate some surprising functions, such as an accelerometer to detect when someone is about to collapse.
For a table marker, this one packs a punch.
There are a plethora of labeled test points visible on the PCB’s reverse side, and we suppose it wouldn’t be too difficult to figure out how to make one of these table markers do your bidding.
It is unclear to us why they require so much hardware to designate which table a certain order should be delivered to; it appears that the number written on the device’s body would be sufficient to do this.

The local McDonald’s offers more than just getting flung out of the ball pit once in a while, with activities ranging from reverse engineering their famed fries to hacking the toys they give out with Happy Meals.

‎RadBeacon

In addition to supporting Apple’s iBeaconTM proximity services as well as other forthcoming proximity services, the RadBeaconTM app also serves as the setup tool for RadBeacon proximity beacons manufactured by Radius Networks. The Radius Networks RadBeacon software requires an iOS iPhone, iPad, or iPod touch running iOS 7.1 or above and equipped with Bluetooth 4.0 capabilities in order to function properly. The RadBeacon app allows you to search for customisable Radius Networks beacons in your immediate vicinity.

Scan for RadBeacons – Swipe down on the RadBeacons table to scan for customizable RadBeacons that are nearby.
Reviewing RadBeacon Settings – Select any RadBeacon in the table to examine the RadBeacon’s comprehensive configuration options.
Select Apply from the Action Menu by pressing the Action Menu button.
Calculating Measured Power – Select Calibrate from the Action Menu by pressing the Action Menu button.
Update the measured power value to reflect the results of your calibration activity, and then make any necessary adjustments to your settings.
By immediately checking the ranging behavior of your device while it is in close proximity to the specified beacon, you can confirm the correctness of your configurations.
To update the PIN for your beacon, you must provide both a new and an existing PIN.

Restore the device’s factory default settings to its original state.

Lock Settings – Press the Action Menu button and then pick Lock from the drop-down menu.

Locking your beacons after they have been installed and configured is a security measure designed to reduce the chance of third-party manipulation of your beacons once they have been setup.

Remove the front cover of a RadBeacon Tag and press the configuration push button switch, which is located near the coin cell battery, to re-enter customizable mode.

A beacon that has been set to customizable mode will remain adjustable for up to 30 minutes or until the device has been locked.

Start the beacon in Direct Firmware Update mode by rebooting it once more. For further information on the method for updating or replacing the firmware, contact Radius Networks customer service. To return the gadget to its usual operating state, just disconnect and reconnect the power to the device.

Amazon.com: Radius Networks RadBeacon Dot – Proximity Beacon with Eddystone, iBeacon and AltBeacon Technology : Electronics

a rating of one out of five stars Although the product’s specifications appear to be excellent, its real-world functionality indicates that it is not yet ready for prime time. The article was reviewed in the United States on March 20, 2018. My unit finally turned on after 30 minutes of following the on-screen instructions, which included removing and reinserting the battery. When attempting to pair a Pixel XL with a Bluetooth device, the device would recognize the device but never complete the pairing process.

This unit, which has iBeach, EddyStone, and AltBeacon capabilities, appears to be ideal for reaching the broadest possible audience.

This has been disqualified for a use in which we will be installing a large number of beacons, despite the fact that I am a tech with 30 years of wireless and networking experience.

Top reviews from the United States

The article was reviewed in the United States on March 20, 2018. Purchase that has been verified My device finally turned on after 30 minutes of following the on-screen directions, which included removing and reinserting the battery. When attempting to link a Pixel XL with a Bluetooth device, the device would recognize the device but never finish the pairing process. Once the program had finished scanning, it would crash entirely (I guess because it couldn’t detect a beacon – an error trap should have been included to prevent the crash and notify the user).

However, between the functionality of the unit, the app, and a one-page “manual” with no support phone, it is far from being ready for prime time yet.
a rating of one out of five stars Although the product’s specifications appear to be excellent, its real-world operation indicates that it is not yet ready for prime time.
My device finally turned on after 30 minutes of following the on-screen directions, which included removing and reinserting the battery.
Once the program had finished scanning, it would crash entirely (I guess because it couldn’t detect a beacon – an error trap should have been included to prevent the crash and notify the user).
However, between the functionality of the unit, the app, and a one-page “manual” with no support phone, it is far from being ready for prime time yet.
The photographs in this review On November 27, 2018, a review was conducted in the United States.
This works precisely like an iBeacon should, with all of the appropriate areas and range.

The setup app is marginally less clumsy than the competition’s, but that isn’t saying much considering the competition.

-1/2 of a star For having modest red and green LEDs to show on/off state that are positioned symmetrically and activated by a toggle button, the device receives a -1 star.

These lights are indistinguishable to them, and they are unable to tell them apart based on their location.

This is a serious failing in terms of accessibility.

Purchase that has been verified The process from opening the box to installing and using the software takes only a few minutes.

We’re a product research business with a focus on security, and we acquired the USB and two DOTS to test their functionality.

If you’re searching for an iBeacon solution, these solutions from Radius Networks are a fantastic place to start your search.

With the App, you may create WYSIWYG documents.

We took a look at some of the bad reviews and made the following observations: There is a Power Button on the DOTS, which has a few different options to choose from.

For the first time user, Config Mode is likely to cause issues since they forget to press the button again after completing the configuration process in order to return to regular operating mode.

For Config Mode, press and hold the button for 5 seconds.

We recommend that you maintain your iPhone or iPad in close proximity to your computer, possibly within 1-3 feet range, for the greatest Config Mode experience.

5.0 stars out of 5 for this product In only a few minutes, you may go from unpacking to installing and using the software.

The process from opening the box to installing and using the software takes only a few minutes.

We’re a product research business with a focus on security, and we acquired the USB and two DOTS to test their functionality.

If you’re searching for an iBeacon solution, these solutions from Radius Networks are a fantastic place to start your search.

With the App, you may create WYSIWYG documents.

We took a look at some of the bad reviews and made the following observations: On the DOTS, to be precise.

A switch has the functions of On, Off, and Configuration.

For example: On.

When you’re through with Config Mode, press the Button gain to switch to the ‘ON’ state.

The USB gadget is ready to use right out of the box, with no issues or that nagging sensation of ‘what do I do now?’ In terms of functionality, the Config Mode Screen is identical to that of a DOT, which means that both devices utilize the same App for configuration and both devices automatically Scan and Attach to their respective devices.

They are not particularly dependable in their operation.
As a result, I am unable to utilize them to assess presence as I had anticipated with my SmartThings system because to their insufficient reliability.
When running the Android app RadBeacon version 1.2 on Android 5.1, the beacon did not store the TYPE field value.
However, no matter what combination of Alt EddystoneUUID EddystoneURL I choose and write, the type is always iBeacon.
The results indicate that Android 5.1 accurately reads the settings, but does not correctly put the TYPE value back.
When it comes to providing precise and extensive information, their website leaves a lot to be desired.
One thing I don’t like about the system is that even with a PIN, the user may view the configuration.

I’m considering looking at Kontakt and Bluecoats as well.

This product is one of my favorites because it is really little and virtually undetectable.

I had a problem since I didn’t understand the criteria for Google nearby, but the team helped me out by 1) replacing my product when it wasn’t functioning and 2) talking to me on the phone twice to make sure it was operating right.

Retail – BeaconZone Blog

A beacon-based system for hospitals, shopping malls, and hotels, GoPorter automates task allocation, offers real-time indoor tracking, and delivers business analytics and reporting. It is currently in beta. Service request patterns may be learned via systems such as GoPorter, which allows facilities management to deploy the ideal amount of workers to enhance efficiency while also reducing costs. One of our suppliers, Moko, has released some new movies showcasing how beacons may be utilized in various situations.

It’s possible that you’ve heard that beacons may be used to trigger pop-up notifications.

At the moment, there are two methods for causing beacons to send notifications:

On iOS devices, the Apple Pass Kit is available. Implement a beacon marketing strategy using an app, as outlined in our article on Beacons for Marketing.

SameSystem is a retail labor management system that was developed in-house. It helps to avoid needless expenditures associated with overstaffing while also ensuring that there is enough staff available during peak periods. The trouble with retail is that there are many different shifts and that employees come and go constantly, making it impossible to keep track of who is in and who is out. By utilizing iBeacons, SameSystem reduces the amount of time spent manually logging in and out. With the SameSystem, everything is automated since it knows when employees come, go, or take breaks.

iBeacons may be viewed here.

In the technical documentation, it is explained how you may trigger the display of certain information when you are in close proximity to a specified beacon.

For example, if the kiosk is moving due to the movement of the user, such as a tablet being carried, it may cause various information to be shown depending on the location of different exhibits, for example.

iBeacons may be viewed here.

Achieving this is extremely challenging due to the large amounts of labor required, particularly at the beginning and end of the day when service employees are searching for customers’ vehicles.

Through the use of technology, there are several unexplored potential to increase the efficiency of dealerships while also improving the customer experience.

For example, finding automobiles is a challenge.

Sometimes an automobile will be in one of a few locations, or it may even be at a storage facility.

Automobiles can occasionally become stuck in other cars, necessitating the use of additional keys to free them.

Providing Sales Information – Providing sales information The usage of beacons connected to automobiles for sale in conjunction with applications can give information and gather leads when the salesman is unavailable or the dealership is closed.

Through social sharing, there are other chances to broaden the reach of marketing to customers’ friends and family members.

Providing Service Information Apps, Bluetooth gateways, and web sites can be utilized to deliver automatic information about the status of maintenance based on the location of the device, so relieving employees of the burden of answering phone calls.

The information on service time, throughput, and productivity may be gathered.

Find out more about BeaconRTLSTM.

Untuiface is one of an increasing number of devices that include beacons as part of their overall functioning.

Intuiface Composer is a piece of software that allows you to compose music intuitively.

When anything or someone comes close to a static kiosk, the content might be triggered.

As a result, the settings allow for multiple sorts of engagement to occur when beacon advertising are detected, change, or are no longer present.

Learn more about how to use beacons in iOS and Android applications.

The authors employ a ‘process mining’ approach to examine rare and partial data from a beacon event log, which they find to be particularly useful.

Rather than using Bluetooth from their devices, the beacons were something people deliberately carried as part of the research.

They discovered that male clients used a loop between clothing caterers and clothing supermarkets to get their clothes.

Customers who spent more time in the food department spent less time in the clothes department, while the reverse was true.

Depending on the time of day, catering and clothes were the most popular retail groupings to visit (of year) The research comes to the conclusion that Bluetooth is a cost-effective tracking technology that gives observations that are impartial and uninfluenced.

However, at BeaconZone, we are witnessing a comeback in the usage of beacons in the retail industry.

When it comes to the instances that remain, beacons are more often used as an adjunct to something else rather than as the primary answer.

Many food stores, notably in the United States, are implementing beacon technology.

A virtual wardrobe, accessible from the comfort of their own homes, allowing clients to purchase everything they saw in store.

AtIM, Eric West is the Head of Strategy.

The use of beacons in lights to drive location-based messaging and navigation is also mentioned in the pdf document.

Read more about Marketing using Beacons.

As we’ve previously stated, beacons aren’t really effective for unsolicited marketing (and Eddystone beacons aren’t that effective either), and you should instead focus on providing helpful information on top of which you can subsequently make offers.

Promotions push in conjunction with data collecting [email protected] Bonmati mrxpic.twitter.com/MrLgpLUF3G mrxpic.twitter.com/MrLgpLUF3G On May 19, 2017, Joaquim Bretcha (@jbretcha) tweeted: As you can see, their app does a great deal more than what push gives.

By sending alerts, in-app messages, and SMS messages at the proper moments, it gently reminds the user to take action. The goal is to have “constant exposure to Tesco media,” rather than to promote specific products.

Ethan Fontole