How To Set Up Ventilation For Grow Tent

How to Ventilate Your Grow Space

You must have adequate ventilation in order for your plants to flourish. By giving your plants with fresh air from outside your grow tent, you are supplying them with CO2, which is necessary for their photosynthesis. Meanwhile, removing the air inside will help to keep the temperature and moisture buildup under control, avoiding mold and mildew from growing on your plants’ leaves and so hindering their ability to thrive. The extra benefit of refreshing the air within is that it helps to eliminate unpleasant smells.

Essential Grow Tent Parts

Assuming you have previously chosen or purchased your grow tent, this tutorial is equally useful if you are working in a grow room. This is a list of the three most important components that you’ll need to put together while building a ventilation system:

Inline Duct Fan (Active Exhaust Fan)

An inline duct fan, also known as an extractor fan, is a device that is used to exhaust hot and humid air from within a growing chamber or tent. Even little variations in temperature and humidity may have a significant impact on your chances of generating a fruitful harvest. Furthermore, unregulated heat and humidity cause poor growth circumstances, resulting in your plants being unable to absorb water or simply failing to make it through the day. The use of an inline duct fan in your grow room is essential for controlling the climate in your growing environment.

Using an active exhaust fan to draw in cooler air can assist you in maintaining a comfortable inside temperature level.

In ventilation systems with passive intake, inline duct fans also serve as a vacuum, drawing in new CO2 from the outside air and bringing it into the system.

Duct Tubes

Inline duct fans are attached to your grow room using ducting that is clamped or glued in place. The ducting serves as a channel to divert stagnant air away from your grow space. They are typically constructed of aluminum, although they may also be multilayered to provide additional protection against rips. Its size and bends have an impact on the performance of your inline duct fan, but we’ll get into that later.

Carbon Filter

A carbon filter will be required in order to prevent scents from traveling to your garage or closet. This device, which is also known as a carbon scrubber, removes the smell of plants from the air, capturing the odor and neutralizing it. Carbon filters are a must-have for growers that have to cope with very strong odors. They are also used to trap pollen and spores, which helps to keep the air clean for farmers who suffer from allergies or respiratory problems such as asthma.

Typical Grow Tent Setups

There are several configurations for these components that may be used to create airflow into your grow environment. As a standard configuration, the fan and the filter are placed inside, which makes it easy to control while also dampening the noise from the fan. If air is being drawn out of your grow room, one or both of these components can be placed in any sequence within the ventilation chain. It is possible to customize your ventilation system in at least four different ways in order to meet your requirements.

The fan and/or filter can be placed outside of the grow tent in this situation.

Because heat rises to the top of the building, venting that hot air at that point will improve the efficiency of the ventilation process. Your carbon filter will also operate better if it is installed at the greatest possible elevation.

What Size Inline Fan do I Need?

There are many different sizes of grow areas, and each one requires a particular amount of airflow to be properly ventilated. It is critical for maximum plant growth that stale air within your grow room is exchanged with fresh air from the outside of your grow area. CFM (cubic feet per minute) is the unit of measurement for this number. To determine the quantity of airflow required for your grow room, first calculate the volume in cubic feet of the space. Most grow tent specifications are offered to you in inches; thus, you must convert the size of your space from inches to feet.

This will match the capacity of your grow room, and the needed airflow will be equal to this value in cubic feet per minute, or CFM, as well.

When the dimensions are added together, the result is 72 ft 3 in length.

Keep this amount handy since you’ll need to adjust it to account for the ducting, carbon filter, and any other accessories you decide to install.

Factoring in Accessories

In order to boost your base CFM, you must multiply it by the efficiency percentages of your accessories. Adding components to your grow room, including as ducting and carbon filters, may limit fan performance, which will have an impact on the fan size you require. When it comes to ducting, the quantity and sharpness of its bends play a role in determining the resistance to airflow. As a result, airflow decreases the longer it needs go, making a straighter ducting path more effective. The greater the sharpness of the curve, the greater the severity of the efficiency drop; a 30° bend reduces airflow by 20%, while a 90° bend reduces airflow by 60%!

  • If you are utilizing LED grow lights, you must also take into consideration their heat production, which can raise your necessary CFM by as much as 50%.
  • Because the efficiency of accessories on the market might vary substantially, you can utilize approximated efficiency percentages based on the type of component you are using.
  • This amount is multiplied by the efficiency % of each component to arrive at the final result.
  • Adding in the heat output of your grow lamp (about 50%) gives us a needed CFM of 249 cubic feet per minute.
  • The following is a breakdown of this calculation: Multiplying your base CFM (72) by the percentages of ducting (20 percent), carbon filter (60 percent), silencer (20 percent), and grow light heat (50 percent) of your choosing will provide about the 249 CFM you require.
  • This will let the fan to operate at lower speeds while remaining quieter, as well as providing additional area for future expand space system growth.

Look for inline duct fans that are powered by direct current (DC) fan motors, which are the quietest as compared to alternating current (AC) fan motors. PWM-controlled EC motors are also acceptable in terms of acoustic performance.

How to Manage Grow Space Noise

There is no question that you will hear some noise when employing a high-powered fan to air your grow environment. You wouldn’t want to spend an extended period of time in an area with excessive noise pollution or catch the attention of your neighbors. Fortunately, you can plan your component selection with noise reduction in mind, and you can take further steps to make your grow area as as quiet as possible. Making the decision to choose a fan with speed controls and a CFM rating that is 25 percent more than your minimal need will allow you to run the fan at lower speeds without compromising performance.

If you want to further muffle the sound of your active exhaust fan, you may attach a silencer to it, which will lessen the sound of the intake fan.

Setting Up Ventilation in Your Grow Tent

Introduction: When it comes to cultivating a healthy plant, airflow is very critical to its success. In addition to replacing CO2 and removing O2 from the immediate region around your plants, proper airflow aids in the development of structural resilience in stems. Your plants will struggle to obtain enough chemicals to photosynthesize light if they do not have adequate ventilation. In order to generate airflow, we propose that you use two distinct methods: the first is through a ventilation system, and the second is through simple oscillating fans.

  • We’ll talk about how to set up the ventilation system in this section.
  • The most effective approach to think about ventilation is to start with air pressure measurements.
  • Negative air pressure occurs when air is aggressively pushed into your tent and has the ability to passively exit your tent.
  • The term “negative air pressure” refers to when air is forcibly drawn out of your tent and can passively enter your tent as a result.
  • As a result of keeping this in mind, we can visualize the arrangement of our setups: Positive air pressure: Air is being driven into the tent by positive air pressure.
  • When you set up your fan, make sure that it is towards the interior of your tent, as shown below: (The arrow should point toward the tent.) Check to see that the fan is moving air through the tent.
  • In this manner, you can ensure that your plants will always have access to fresh air by erecting the tent in the traditional manner.

To alleviate this impact, just open additional flaps to reduce the pressure, or you may need to use a fan with a lower power setting.

If you intend to utilize a filter to eliminate odors, this is the ideal approach of setting up your system.

Whatever the position of the filter inside the ducting, the result will be identical regardless of where it is located.

Of course, you may create a negative airflow without the use of a filter if you like.

Simply increasing the number of ventilation ports will help to alleviate the problem; but, if the problem persists, it is possible that your fan is too strong for the size of tent you are using.

The use of this setup is not suggested if you want to develop healthy, productive plants since you will never be able to produce healthy plants without regular circulation of carbon dioxide in the environment.

Having auxiliary ports open in your tent is really pretty crucial for plants, since it will be impossible to replace the fresh air if there are no auxiliary ports open in your tent.

Your fan will be doing two duties at the same time: circulating fresh air and cooling the room.

There are plenty excellent CFM calculators available online, such as this one from Hydrotek Hydroponics.

-If required, a filter to eliminate any scents from the air.

Additionally, we provide whole grow tent kits, in which we have already matched the appropriate fan with the appropriate tent, such as this kit here.

If you have any questions, please do not hesitate to contact us by phone or email, and we will be happy to assist you with putting up your tent. Best of luck with your growth!

Grow Tent Ventilation Setup & Exhaust Guide

The importance of ventilation in your grow room cannot be overstated. As a result, poor ventilation is responsible for the majority of cannabis issues and leaf symptomatology. CO2 concentrations, temperature, humidity, and other factors are all taken into consideration. Cannabis plants are only able to survive under specific environmental conditions. It is at this point that grow tent ventilation and exhaust become important.

Why Your Grow Tent Ventilation Is So Important?

Your grow tent should attempt to emulate the growth conditions seen in nature. And the greater degree of control you have over those circumstances, the better. The most important thing to remember is that ventilation and exhaust are essential. Because of this, your grow tent’s environment is favourable to healthy development, vigorous plants, and abundant yields.

Keep The Perfect CO2 Level For Cannabis

Cannabis, like other plants, need carbon dioxide in order to live. However, when plants are enclosed in a small area, the CO2 in the air will soon be depleted and replaced by oxygen if there is insufficient circulation to the plants. So we’ll have to figure out how to restock it in some way. This means that the cold, fresh CO2-filled air should be drawn into your setup while the used air is expelled out the back.

Control Humidity And Excess Heat

Bud rot occurs as a result of inadequate ventilation. Cannabis plants grow in temperatures that humans would consider to be “comfortable.” That is to say, the temperature should be between 70 and 85 degrees Fahrenheit (or 20 and 30 degrees Celsius) throughout the vegetative stage. Dropping the temperature to roughly 65-80°F (18-26°C) when your plants are ready to blossom can result in higher yields and better-quality buds when your plants are ready to flower. In addition to adjusting the temperature of your grow tent, you should also consider controlling the humidity.

If you do not have an adequate exhaust system, you may find yourself with a moist grow room where mold and fungi will begin to thrive.

Avoids Pests And Plant Diseases In Your Tent

Mold and fungus aren’t the only types of organisms that producers must be on the lookout for and avoid. Protect your plants against insect pests, which can thrive in stagnant air and damp soils, as well as from other environmental factors. It is difficult for spider mites and fungus gnats to fly when they are in well-ventilated areas. This means that if you have the proper fan and exhaust system, your plants will be lot safer from these insects.

Strengthen Stems

Finally, it’s vital to note that cannabis plants benefit from, and even require, a mild breeze in order to flourish at their ideal levels. This helps to give the stems a good exercise and keeps them from becoming too weak to sustain normal bud growth in the future.

Your stems might get anemic if you don’t have a consistent wind blowing through your grow tent. This can lead to bowing. This, in turn, can hinder the leaves from absorbing enough light to effectively photosynthesize, resulting in a reduction in the ability of the plant to grow.

Ways To Setup A Ventilation System In Your Grow Area

It may be necessary to make an investment and experiment in order to find the optimal ventilation for your ventilation system. Nonetheless, it is a feature of your system that will almost certainly pay off in the future. For begin, there are two different methods to configure your ventilation: passive intake or active intake.

See also:  How To Fold A Children'S Pop Up Dinosaur Tent

Exhaust Fan With Passive Intake

Passive intake depends on negative pressure to generate passive airflow, which is why it is called passive. Quite simply, you have a fan that is pushing air out of the tent, but there is no fan pushing air in from the other side of the tent. As an alternative, you may install an intake hole that allows new air to enter the tent passively. You can have a single passive intake hole that is approximately three or four times the size of the exhaust hole, or you can have many passive intake holes.

This approach will cut energy use and will be the most effective for the majority of farmers.

Active Air Intake And Exhaust System

An active intake system, on the other hand, makes use of a fan to actively draw air into your growing environment. As a result, there are two fans who are cooperating. One to restrict the air from within the tent from blowing out, and another to keep the air from blowing in from outside the tent. When employing this technique, the size of the intake hole is less critical. Because an intake hole that’s almost the same size as an exhaust hole indicates that your grow tent is ideally suited for an active intake system, you should consider installing one.

The Ultimate Ventilation Setup

The fundamental concept of exhaust systems remains constant. Keeping clean, fresh air coming in while venting out old and humid air is critical for the system to function properly. However, there are other accessories and pieces of equipment that you may incorporate into your setup. The ideal ventilation design will not only keep your crop healthy, but it will also be discrete, resulting in the least amount of noise and aromas possible. I’m going to presume that your setup includes any or all of the following components:

  • The use of rope ratchets for securing your equipment
  • An exhaust fan (we’re going to use a passive intake for this project)
  • A carbon filter is used. Ducting and clamps are used. A deafening silencer
  • A fan that oscillates
  • Grow lights that are air cooled (most types of lights, such as LEDs, generate practically minimal heat and hence do not require inclusion in your ventilation system)

Ducting Your Fans And Accessories

The remainder of your equipment will be connected to your exhaust fan in the stages that follow this one, so pay attention. This will be accomplished by the use of aluminum ducting. Using flexible aluminum ducting, I have discovered that the right mix of price, adaptability, and convenience of installation may be achieved. However, insulated aluminum ducting will also work well if you want stronger duty ducting and have the necessary funds. Check for kinks and creases and smooth them out if necessary to guarantee top performance.

Also, try to maintain your path as short and straight as possible until you are outside the tent and the air is flowing freely. You will have a less efficient system the longer and more roundabout your journey is.

Inline Exhaust Fan

After erecting your grow tent, the first thing you should do is connect your exhaust inline fan to it. However, you should avoid connecting anything to your power source until you’re ready to begin growing. Step inside your tent and attach your exhaust fan to the exhaust hole in the floor of your tent. Hanging your fan from the ceiling of your tent is one option. Connect the fan’s exit port directly to the exhaust hole, or duct it if you find it more comfortable, and then close the fan off completely.

Carbon Filter To Deal With Odor

Using your exhaust system to your advantage might let you develop discreetly if you like. It is possible to keep the scent of cannabis out of your home by using a carbon filter. Your carbon filter is something that has to be considered while configuring your exhaust system. In order for the air from your grow tent to be expelled outdoors, it first has to travel through your filter. Many growers choose to employ the simplest possible configuration, which is to hang the carbon filter inside the tent.

In this manner, the air will first pass through the carbon filter, after which the exhaust fan will expel the filtered air to an outside environment (first picture).

In the event that you do this correctly, the only location where you’ll be able to smell cannabis will be when you’re inside your grow tent.

Silencer For Extra Stealth

When installing a silencer, it is best to position it immediately after the fan; but, if necessary, you may place it farther down the ducting. It works by muffleing the air coming from the exhaust, resulting in significantly less noise. And they are quite effective. My tent, which is located within the home, has a suppressor placed in it, and the decrease in noise is incredible. I highly recommend it. It also alters the sound style; it moves from being a dreadful whining to a pleasant swooshing that sounds more like wind as a result of the shift in volume.

Connecting An Air-Cooled Reflector (Mostly for HID grow lights)

If you’re utilizing high-intensity discharge (HID) grow lights, it’s extremely probable that your hooded fixture can accommodate ducting. You’ll need to have direct airflow passing through the light’s reflector in order for it to work properly. This will assist you in keeping the temperatures down as well as the light bulbs cool, which is important because HID lights generate a lot of heat. Depending on your reflector and how many additional accessories you have, this can add a significant amount of complexity to your setup.

Everything needs to be connected in a straight line. Starting with your CO2 filter and working your way up to your reflector is a good idea. After that, connect your reflector to your exhaust fan, and lastly to the exhaust port on your tent’s roof.

Sealing Your Grow Tent To Create Suction

A sealed grow tent guarantees that only air enters through the intake hole and only leaves exit via the exhaust fan when the tent is closed. Your exhaust system will be prone to air leakage and will be extremely inefficient if the seals are not properly installed. Sealing provides a separate environment, allowing you to regulate temperature, humidity, and CO2 levels independently. Additionally, it guarantees that your exhaust system is running at maximum efficiency. Your exhaust fan will generate negative air pressure as a result of reducing air leakage, allowing fresh air to enter via the intake hole.

When used in conjunction with a carbon filter, this will further reduce the likelihood of cannabis scents penetrating your house.

However, if you have tears or pinholes, you may use anything from duct tape to Black RTV Silicone to close them up again.

Check For Air Leaks

To check for air leaks, start by turning on your system and closing your tent from the inside outward. Moving an incense stick about the interior of your tent and observing its behavior can give you a better understanding of its behavior. If the smoke rises straight up into the air, the air is exactly where it should be. To finish, take the incense stick outside the tent and position it near to the intake hole on the other side. If the smoke snakes towards the intake, this is a strong indication that you have accomplished effective sealing and negative pressure in the engine.

Oscillating Fans

Oscillating fans are both inexpensive and quite effective. The process of blowing and spreading air uniformly within your grow tent, while also ensuring that the wind is powerful enough to keep the stems of your plants strong You may use floor fans that are placed in a corner of your room or grow tent fans that are much smaller and clip on to the poles of your tent to keep the heat out. It’s possible to hang it or place it in your room if you’re a bit of a do-it-yourselfer and you have a fan laying around.

The number of fans you need will depend on the size of your grow tent and the size of the fans you use.

There is no straightforward method of determining how many you require.

How To Calculate CFM For Exhaust Fans

To properly ventilate your grow tent, you must first determine how much fresh air is required in order to guarantee that your plants develop in a healthy manner.

You may determine the appropriate Cubic Feet per Minute (CFM) required to ventilate your tent using a formula, which is provided below.

1. First let’s find out your grow tent’s volume

While the height of your grow tent may vary, we’ll use a 4×4 grow tent with a pretty standard 8′ height as an example. (width) * (depth) * (height) = 128 ft 3 (width * depth * height)

2. Calculating Base CFM

The amount of air in your grow tent should be replenished by your inline fans once every two to three minutes, at the absolute least. The following is the formula: 128 feet/3 minutes =64 CFMB However, the temperature and humidity of the surrounding environment must be taken into consideration. If the room from which you’re obtaining the air is excessively hot, add an additional 20% to your calculations. And if you’re dealing with high humidity, increase the percentage by another 40%. In a hot and humid environment like mine, the result might be something like this: 64 (cfm) multiplied by 1.4 (humidity) multiplied by 1.2 (warm climate) Equals 108 Base CFM This implies that in order to adequately ventilate your 128ft 3grow tent, you must exchange 108 cubic feet of air every minute.

3. Factoring In Accessories

Now that you’ve calculated your basic CFM, you’ll need to add in your accessories, which may include ducting, grow lights, and a carbon filter or silencer, among others (where necessary). All of these factors might have an impact on how hard your fan has to work in order to create the ideal growth conditions. For example, any abrupt bends in your ducting will drastically limit the efficiency of the airflow through the system. A 90-degree curve has the potential to restrict airflow by up to 60%!

If you’re using a charcoal filter to eliminate scents emanating from your tent, add additional 60 percent to your calculations.

Accessories Effect on CFM
LED grow lights 20%
HID grow lights 50%
CO2 filter 60%
Silencer 20%
Ducting 30º Bend 20%
Ducting 90º Bend 60%

If we only had a few bends, a few LED grow lights, and a CO2 filter, we’d be in business. In the end, our CFM formula would be: 108 (base) * 1.2 (lights) * 1.6 (filter) * 1.9 (ducting) = 394 Total CFM Required You will now need to purchase an exhaust fan that can produce this amount of Cubic Feet of air per Minute, depending on the size of your grow tent and the accessories you will be using. Check out the greatest 6′′ inline fans that are capable of performing admirably.

Other Air Flow And Ventilation Tips

It is reasonable to expect some noise from your grow tent because it requires a powerful fan to air it. It is possible to reduce this so that your growth is more subtle and unobtrusive, but it is not recommended. Choose a fan with variable speed settings and a CFM rating that is 25 percent more than your requirements; this will allow you to run it at a reduced speed and so reduce noise. Furthermore, the majority of inline fan types are equipped with noise-reducing capabilities. However, as previously said, you may also connect a silencer to your fan, which will reduce the noise it makes.

CO2 Injection To Increase Yields

Injection of CO2 into a grow tent Plants, as most growers are aware, “breathe out” oxygen while “absorbing” Carbon Dioxide (CO2). While plants do not have lungs, they do have hundreds of small holes on their surfaces known as stomata, which allow them to collect CO2 from the surrounding environment. In contrast to us, they require more carbon dioxide in the air than oxygen in order to maintain optimum health. This invisible gas is essential to the process of photosynthesis, and your plants will “suffocate” and die if they do not receive enough of it.

It may even be possible to make your plants more resistant to heat and light by doing so.

Trying to get the most out of every situation.

Even novices and enthusiasts may get incredible yields in the absence of this. CO2 supplementation is a complicated procedure that may be accomplished in a variety of ways. Check out this professional tutorial from CO2Meter for more information on how to get started.

Grow Room Air Conditioner

Despite the fact that it may be deemed unnecessary, an air conditioner may be a worthwhile purchase if you are coping with extreme heat. This is especially true for larger venues. It might be an excellent method of avoiding excessive heat and exerting the greatest amount of control over your temperature. Whether you’re growing in the heat of summer or the cold of winter, your plants will benefit from the right cool breeze and provide you with strong and consistent harvests. You have the option of putting your air conditioning unit on the ground.

See also:  What Is Tent Option On Hondacrv

It’s also a good idea to put it near an outlet so that any remaining water can be easily drained.

According to this calculator, 5,000 BTU is sufficient for grow tents measuring up to 4x4x8 feet in size.

Final Thoughts

In conclusion, ventilation is extremely crucial to the health and production of your plants, as you can see. The more the degree to which airflow is left to chance, the greater the likelihood that you will be disappointed with poor yields. There are several methods through which you may exercise control over the ventilation of your grow tent in order to achieve maximum yields. Hopefully, you were able to choose one that best meets your needs. And remember to go back to this post anytime you have any questions.

Grow Room Ventilation 101

Indoor growers benefit from an extended growing season, total control over growth conditions, and the convenience of growing in a controlled environment within their home. This all sounds wonderful, but we tend to overlook the need of grow room ventilation. When I initially started growing plants inside, I ran across a lot of difficulties. I had a fan put up, which I though was adequate for providing air circulation for my plants. I was wrong. I was completely mistaken. More than just a corner fan is required to provide proper grow room ventilation.

  • What is the purpose of ventilation in grow rooms? How to properly ventilate a grow room
  • What is the best way to determine what type of fan to purchase?

Don’t get too worked up over it. I’ve made all of these errors (and many more) so that you don’t have to do them yourself. As long as you understand the principles of grow room ventilation, it is actually rather straightforward. So let’s get this party started. Listen to this episode of the Epic Gardening Podcast to learn more about it. Subscribe to the Epic Gardening Podcast on iTunes to get the latest episodes.

Why Do You Need to Ventilate Your Grow Room?

So, why is it necessary to have ventilation in grow rooms and grow tents? As it turns out, there are a slew of factors to consider. Light breezes, sunlight, evaporation, and precipitation all have a calming impact on plants that are planted outside in the open air. Inside, we replace fans for the wind and evaporation caused by the sun, grow lights for the sunlight, and irrigation systems for the precipitation caused by the rain.

What we tend to overlook is that air flows more naturally outside than it does in your grow area. To keep the air in your grow room as fresh as possible, you’ll need both a fan and an air extraction device. The reason behind this is as follows.

Remove Excess Heat

Heat is produced by grow lights. It may not seem like much, but even a few degrees variation in temperature may make the difference between a good harvest and a less successful one in agriculture. Certain grow lights generate more heat than others, but all generate enough heat to need the use of a ventilation system.

Control Humidity

It is also possible that humidity will play a role in the development of difficulties with indoor growth systems. Every day, plants release water vapor, which raises the humidity level in your grow room to an unhealthy level. The growth of pests and illnesses can be exacerbated by uncontrolled humidity, which results in poor growing circumstances. A proper ventilation system also wicks away part of the water that is released during transpiration, allowing your plants to absorb more water and suck up nutrients through their root systems, resulting in increased plant growth and productivity.

Prevent Pests and Diseases

Pests and illnesses are less likely to spread when there is enough air movement. Mold, powdery mildew, spider mites, and fungus gnats are all attracted to stagnant, damp environments. Pests deposit their eggs in moist topsoil, so using a fan to keep the top layer of soil dry will help to limit their reproductive cycle. Additionally, a consistent breeze makes it more difficult for them to establish themselves on your plants in the first place, which is beneficial for you.

Control CO2

There is one extremely important reason why plants require outside air: carbon dioxide (CO2). Carbon dioxide is absorbed by plants throughout the day as part of the nutrition cycle. If your grow tent arrangement is sealed, this implies that the level of CO2 in the room steadily declines, resulting in your plants’ development being stunted over time. When you have good ventilation, you can bring in new air and fresh CO2 from outside and remove the old air from your grow room, which will help you grow more and yield more.

Manage Wind Stress

Wind regularly buffets outside plants, causing them to wilt. This helps to make the stems of the plants stronger, which is beneficial when it comes time for them to yield their fruit. Plants that are stronger produce and grow better than lesser plants, which can get weakened by the weight of their own production. So, why do you require a grow room ventilation system in the first place? Let’s go through it again. A good ventilation system should include the following features:

  • It lowers the likelihood of illnesses such as mold and powdery mildew growing in the home. It might assist you in protecting your plants against pests such as spider mites and fungus gnats. It assists you in maintaining temperature and humidity management in your grow environment. It aids in the strengthening of your plants’ stems.

If those arguments aren’t enough to persuade you that you require a grow room ventilation system, consider the expense. The cost of setting up a grow tent is not inexpensive. If you’re going to spend the money on a grow tent or grow room, you may as well have it done correctly the first time.

How to Ventilate Your Grow Room

As you learn how to ventilate a grow room, bear in mind that your grow room ventilation system will require two different types of fans to function properly. We’ll talk about the air extractor fan system later, but for now, let’s talk about oscillating fans and how they work. These fans are both inexpensive and effective, which are two of my favorite characteristics in a cooling system of any kind. They circulate air continually above, below, and around your plants, which helps to keep the grow room cool and enhance air circulation in the space.

  • You want your oscillating fans to be able to reach all regions of the growing space, which may entail purchasing a number of fans, but you also don’t want them to be able to point directly at your plants.
  • Installing oscillating fans in your grow room will assist in regulating the temperature and humidity in the space, but fans alone will not be sufficient.
  • A very simple ventilation system.
  • It is recommended that your grow room’s extractor fan system replenish the air in your grow room once per minute, or at the very least every three to five minutes.
  • Making the decision to combine grow tent setup with grow tent ventilation setup was one of the finest decisions I’ve ever made in my life.

Take a moment to learn more about grow tent ventilation before you invest your time and money in grow tent setup. The best time to install a ventilation system in your grow tent is during the setup process since you will not have to work around existing plants or make any changes to your system.

Calculating Fan Strength

Calculating the fan strength you want involves a small amount of mathematics, but it is a straightforward process. CFM, or cubic feet per minute, is the unit of measurement for fans. You must know the following information in order to calculate the CFM you require:

  • The size of your grow room or tent
  • The effectiveness of the exhaust system

Make a rough estimate for the entire volume of your grow room by multiplying its length, breadth, and height together. This is the cubic footage of your room in cubic feet (cubic meters). Keep this phone number handy. Then we’ll multiply that by the efficiency loss to get the final result. Additionally, the efficiency of the filter varies depending on its age and manufacturer, as well as the length of the duct that connects the fan and the filter, among an unlimited number of other parameters.

You should use the following syntax in your formula: For example, if the volume of your room is 320 cubic feet and you have a short duct, you should multiply this figure by two to get the total volume of your room.

If you’re still not sure what I’m talking about, watch this video.

Passive Intake vs Active Intake

There are two methods for bringing air into your grow room, which are known to as passive intake and active intake, respectively. Passive intake is reliant on passive airflow and negative pressure to function properly. With this grow room ventilation system, you have a fan that blows air out, but there is no fan that blows air into the grow room. Instead, you have an intake hole that allows new air to enter passively as a result of pressure differential between the interior of the room and the outside of the room.

In this way, your fan will not have to work as hard and your ventilation system will be able to accomplish optimum suction.

With the help of a fan, active intake systems actively suck air into your grow room.

As a result, if your intake hole is the same size as your exhaust hole, you may want to consider employing an active intake system instead of a passive intake system instead.

Controlling Humidity

Humidity has a significant impact on the health of plants. Too much humidity in your grow room can cause illness, and too little humidity can have a negative influence on development, therefore we need to keep an eye on the humidity level at all times. The majority of the humidity in the grow room is caused by transpiration. Transpiration is the mechanism through which plants release water into the atmosphere through their leaves. The suction caused by transpiration, similar to that of a straw, draws nutrients up through the roots of the plant as the plant creates water vapor.

  • You are not only denying them of water, but you are also essentially depriving them of all nutrition as a result of your actions.
  • As a result, you must be able to easily raise and lower the humidity in your grow room.
  • All that is required is that the humid air be vented out through an exhaust system, as long as the air coming in from the intake is less humid than the air coming in through the room.
  • When it comes to growing plants, there are instances when you may need to increase the humidity level.
  • Consider conducting some study on the humidity levels that your crops enjoy and making every effort to keep the levels within acceptable limits.

Also keep in mind that larger plants emit more water vapor than smaller plants, so as your plants develop, you may need to pay more attention to the humidity levels in the environment.

CO2 Injection

Considering that plants require CO2 for transpiration, it seems reasonable to assume that injecting CO2 into your grow tent will be sufficient to increase plant development. While this is true in theory, there are a few things you should be aware of before using a CO2 injection system in your grow room. CO2 injections need the use of a climate-controlled grow environment for two very essential reasons. The first is a matter of efficiency. Due to the fact that CO2 only works at extremely high concentrations, you’ll need to use a sealed grow room or grow tent arrangement in order to get a concentration high enough to be beneficial.

  • It is unhealthy for people to breathe in the high quantities of CO2 suggested for plants.
  • Consider the fact that your plants will benefit from additional CO2 only if they have powerful grow lights, which you should consider before adding more.
  • So, should you consider adding CO2 to your growing environment?
  • You must also consider the financial implications.
  • For those who have some wiggle space in their budget and wish to experiment with enhancing yields through the use of CO2, explore the options and give it a shot.

Grow Room Ventilation FAQ

First, let’s get a few frequently asked questions out of the way before we finish this session. Q. What size and type of fan do I require? Choosing a fan for the ventilation of your grow room is not a straightforward process. There are a plethora of alternatives available. For starters, you’ll need an in-line duct fan with a capacity larger than the predicted CFM of your grow room. Once you’ve determined the fan’s specs, you’ll need to pick a manufacturer and model. Fans are available in a variety of pricing ranges, so be sure to check several product reviews to ensure that you are obtaining the greatest fan for your money.

  1. Q.
  2. The size of your bulb is one criterion that might assist you in narrowing down your fan search.
  3. Because of the size of the light hood’s entrance, you’ll most likely need a fan with a 6-inch diameter at the very least.
  4. Q.
  5. In order to determine how much of a fan you require for your room, you must first calculate the CFM of your room using the method we discussed before.
  6. Additionally, you should invest in some inexpensive oscillating fans to assist you in regulating the temperature and controlling the airflow in your grow area.
  7. What size intake fan do I need for my system?
See also:  How To Set Up A Cabela'S West Wind Tent

If you are using a passive intake system, the solution is straightforward.

Select an intake fan that is the same size as your exhaust fan if your system is equipped with an active intake system.

What is negative pressure and how does it work?

As a result of the negative pressure in the room, clean air is drawn in from the outside through your input hole, bringing this concept into play during passive ventilation.

Consider negative pressure to be an excursion under the surface of the water in a plywood box.

Assume that the water coming in represents clean air and that the water escaping in bubbles represents unclean air.



However, insulated aluminum ducting or a heavier-duty duct, depending on your tastes and budget, might be used instead of this because it is more economical and easier to install.

Smaller ducts, as well as more bends in the duct and the length of the duct, all contribute to increased airflow resistance, as airflow decreases the longer it has go in a duct.

What can I do to enhance the efficiency of my ducting?

The first thing you should do if you have flexible aluminum ducting is to smooth out any creases that have formed.

Increased airflow and improved performance of your ducting will result as a result of this modification. You may also try to reroute the duct so that it makes fewer turns along the way, and minimize the length of the duct system if at all feasible.

Go Forth and Ventilate!

I sincerely hope you found this article on grow room ventilation systems to be informative. Achieving the optimal ventilation system for your grow room may be difficult, which is why I believe it is critical for indoor growers to understand how ventilation systems function and how grow room ventilation systems can assist their operations. Once you understand the fundamentals, you will be in a much better position to select the most appropriate solution for your organization. How about you? Do you have a grow room ventilation system you adore?

Alternatively, you can share this post with other gardeners by commenting below.

The Green Thumbs Who Approved of This Article: Links to affiliate sites and images from the Amazon Product Advertising API were used in this post.

4 Expert Tips for Venting Grow Tent Into Same Room

Because I am an Amazon Associate, I receive money when people make eligible purchases. You will not be charged any additional fees! Any plant will grow in the presence of fresh air and breeze, which is something that occurs naturally in the wild. When you cultivate your plants indoors, you must provide the right climate for them. It is not something that happens automatically. The air circulation in your home may be controlled with the help of exhaust and venting systems. When venting your grow tent, you have the option of venting it outside or in the same room where your grow tents have been put.

In this post, we’ll provide you some pointers on how to get ideal and healthy in-room ventilation.

But first, let’s take a look at why it’s crucial to have proper air circulation in your grow tent in the first place.

Benefits of Good Air Circulation In Your Grow Tent

A grow tent or chamber is a closed environment that does not allow for the passage of wind to occur. Plants may suffer from a lack of air circulation if they are not provided with enough ventilation. Your plants will not grow and flourish in the same way as plants planted in an open environment with a constant flow of fresh air would grow and thrive. Ventilating your grow room ensures that the plant grows in the greatest possible atmosphere. It provides the wind and air that the plant need for a variety of purposes.

  • Using this product, your plants will be protected against bud rot, mould, and white powdery mildew. Pests such as spider mites and fungus gnats are less likely to appear. Aids in the regulation of humidity and heat in your grow space
  • Plants have robust stems as a result of the swaying and bending that occurs naturally in the environment

Preventing bud rot, mould and white Powdery Mildew

This occurs when air passes through the leaves of a plant and removes the moisture that has been produced by the plant during transpiration. Increased water and nutrient absorption by the plant is enabled as a result of this. The removal of moisture from a plant by air blowing reduces the likelihood of the plant decaying or developing mould on it. Pests are being reduced. Pests such as spider mites and gnats are unable to grow in a windy environment. They are readily blown away by the air. They prefer to live in dry soils where there is no wind blowing through them.

Controlling the Humidity and Temperature Air circulation aids in the uniform distribution of heat and water vapour throughout the growth region.

Strengthening of the stem An effervescent breeze sways and wiggles the branches of your plant, just like in the wild.

This aids the plant in its efforts to gain vigor over time. When the plant begins to blossom and put more weight on its leaves, the strength of the branches becomes increasingly important.

4 Expert Tips for Venting Grow Tent Into Same Room

When you vent your grow tent in the same room as your grow room, the following suggestions will help you get the most out of your investment.

1. Place Your Grow Tent in A Large Room

If you want to vent your grow tent into the same room, be sure the area is large enough to accommodate the humid and hot air that will be coming from your growing environment. It will be difficult to tell the difference when venting in a large space. The air that has been removed from your grow tent will naturally depart from your room. When you open the windows, the fog will simply dissipate. The room becomes stuffy if you vent a grow room into a compact space, on the other hand. In the majority of circumstances, choose a space that is not currently in use.

2. Air Condition Your Room is the source of this information. The most important guideline for in-room venting is to make certain that the air in the room is properly condition. If you do not condition the air, you will be forced to vent from the grow tent, where the same air will find its way back into the grow tent. Another disadvantage of not air conditioning your room is that it becomes extremely hot and stuffy. The humidity in the room will also increase, which will lead to the growth of diseases such as mould and fungi.

  1. You will also make certain that the space has enough of fresh air, which will be beneficial to the grow room.
  2. However, you should place it in the room where you will be venting your air.
  3. The Lasko 1827 ElegancePerformance Adjustable Pedestal Fan is 18 inches in height.
  4. The three silent speeds provide a refreshing air to circulate around your house and business.
  5. The Most Important Characteristics
  • It is ultra-silent, has an adjustable height, and has three quiet, energy-efficient settings. It also has widespread oscillation.

The fan may be purchased at Amazon. Click here to find out the most recent pricing and to purchase it right now. Pedestal Fan from COSTWAY The Costway pedestal fan is one of the quietest and most silent fans you will find on the market, and it is also quite affordable. This device offers a wide-angle oscillation function for more efficient air delivery. It has a horizontal swing that is 90 degrees. You will enjoy a refreshing breeze in every room of your home when you use it. The oscillation is consistent on both sides of the fan’s movement.

The Most Important Characteristics

  • Quiet pedestal fan
  • Long-lasting fan blade cover
  • Wide area oscillation
  • Height that may be adjusted

To find out the most recent pricing and to purchase the fan on Amazon, click here. 16-inch Double-Blade Pedestal Fan by Honeywell A forceful cooling wind is provided by the Honeywell twin blade pedestal fan. Because of the twin blade design, the airflow is maximized and optimized to the greatest extent possible. If you get this fan, you will appreciate how convenient it is.

This unit is equipped with an LED control panel that will allow you to pick a specific performance function of your choosing. You have the option of using the remote control that comes with the fan or the control buttons on the fan. The Most Important Characteristics

  • Airflow that is quiet
  • Auto-off timer that runs from 1 to 8 hours
  • Airflow control with three different speeds
  • Grille that may be removed for easier cleaning

The good news is that the fan is currently available for purchase on Amazon. Now is a good time to get it from Amazon.

3. Buy and Install A Premium Carbon Filter

Your grow tent will be releasing toxic fumes and a foul odor. If there are people in the room, you can’t afford to have polluted air blown into it. As a result, clean the air before it is discharged into the room for improved performance. And it is at this point that the premium carbon filter comes into play. A carbon filter is made out of activated carbon that is placed in a tube. In layman’s terms, a carbon filter is a device that removes pollutants and contaminants from the air by utilizing activated carbons.

  1. To be able to accomplish this, the carbon offers a wide surface area that facilitates chemical interaction between the molecules.
  2. Every particle of carbon in the filter has a wide surface area, which helps to keep the filter clean.
  3. Get a carbon filter that is compatible with the size of your exhaust system, since this is the most crucial thing you can do.
  4. These exhaust filters are available on the market in the following diametrical sizes: The smallest diameter carbon filters are those with a diameter of four inches or less.
  5. Specifically designed for tiny tents (44 or 47 or 48 tents), these filters provide excellent performance.
  6. Carbon filters with a 6 inch diameter offer a 400 CFM flow rate.
  7. Phresh Filter 701005 Filter is available for purchase in this category.

Click here to find out the most recent pricing and to purchase it right now.

They may produce up to 700 cubic feet per minute (CFM).

The VIVOSUN 8 Inch Air Carbon Filter is the greatest 8-inch carbon filter available on the market.

To find out the most recent pricing and to purchase the fan from Amazon, please visit this page.

In the Carbon filter, the best filter is the Phresh Filter 10 in x 24 in.

Click here to get the most recent pricing and to purchase it right away.

It has an extraction rate of up to 1400 CFM and can handle a wide range of applications.

x 24 in. carbon filter is our top selection in this category. It’s available for purchase on Amazon. To check the most recent pricing and purchase the filter from Amazon, please visit this page. You can find out more about carbon filters by reading our guide on How Carbon Filters Work.

4. Buy and Install Effective Grow Room Fans

With excellent grow room fans, you can be confident that all of the air and humidity from your grow tent is vented. Your grow tent’s fans should have the power and ability to exhaust the large quantities of air that will be present in it. If you get a smaller fan, it will not be able to exhaust enough air from your grow tent. Furthermore, if the fan is much larger than the amount of air flowing through your plant, the branches may be broken. The objective is to become more effective by growing a tent fan.

  • A decent fan will have a number of different speeds.
  • It is at the top of our list because of its high performance, power, and silent operation.
  • Even when the fan is operating at its maximum power, it remains exceptionally silent.
  • At maximum speed, the fan produces noises of 32dBA while it is operating at maximum capacity.
  • When the fan is operating, you will scarcely be able to tell that it is there.
  • The fan has eight various speeds and three different power levels, which makes it easy to manage the airflow and make it more comfortable to use.
  • The fan makes use of a dual hydrodynamic and a stator blade configuration.
  • It produces 351 cubic feet per minute of airflow.
  • Ideal for a medium-sized room in terms of strength
  • For more efficient power use, use the variable setting. Extremely peaceful

The fan may be purchased at Amazon. Click here to find out the most recent pricing and to purchase it right now.

Parting Shot

Venting your grow tent in the same room as your growing environment might result in odors and heat accumulation. Other factors to consider are moisture, mould accumulation, and humidity issues in the area where you are venting your tent, among other things. This is especially true if the venting is carried out incorrectly. Simple techniques may be applied to your venting system, and you will be able to live in peace with your grow tent if you follow these guidelines. In order to grow marijuana successfully, you must take steps such as conditioning your room’s climate, purchasing a carbon filter for your tent, and purchasing good grow fans.

Make certain that the size and quality are appropriate. By purchasing any of the venting appliances outlined in this article, you will be able to get the greatest results possible when you vent a grow tent in your home.

Leave a Comment

Your email address will not be published. Required fields are marked *