How To Install Rooftop Tent

How to Install a Roof Top Tent

Roof rack tents are typically compatible with the majority of original equipment manufacturer (OEM) car roof racks. Manufacturers claim, on the other hand, that an aftermarket rack is easier to put your tent to, is more durable, and provides you with extra attachment points for additional gear than a factory rack.

Know Your Roof Rack Weight Ratings

A Dynamic Weight Capacityrating should be specified by the roof top tent manufacturerTepui Tents, which indicates the maximum amount of weight that the roof rack can support when in motion (or while stationary). Based on the use, roof top tents can weigh anywhere from 100 pounds to 220 pounds. A static weight capacity, which is the weight of the tent plus its occupants, is also specified. Most roof rack tents have a weight capacity ranging from 400 to 600 pounds or more, depending on the size.

They will know what you need.

Standard Roof Rack Installation

Installation and setup of a Tepui Kukenam tent with Yakima roof racks are demonstrated in this video.

Heavy Duty Roof Rack Installation

Check out this fantastic video that depicts the installation of a high-end aftermarket basket-styleARB roof rack, which is the most durable version available for a car of this type:

Roof Top Tent Installation

I’m not going to go into detail on how to erect a roof top tent because there are numerous excellent videos available that do it for you. This is an excellent illustration of what is required in constructing a roof top tent:

Single Person Roof Rack Installation

When there are no other choices for more assistance, here is a fantastic how-to for constructing a roof rack tent by yourself (with caution!).

You have Successfully Subscribed!

You can use this guide to construct a roof rack tent by yourself if there are no other possibilities for further assistance (but be careful!).

Pros of Rooftop Tents

Making the decision to purchase a rooftop tent is not an easy one. Take into account both the advantages and disadvantages, as well as your financial situation, to determine if this is the best course of action.

  • Convenience. The installation of the rooftop tent is simple, and the process of setting it up and getting it ready for usage is quick and painless. The ability to quickly set up camp is especially beneficial when you get late to the campsite and it is already dark outside, or when you are racing to go out to the trails. Sleeping on a mattress raised above the ground. It is understandable that some individuals are uncomfortable with the thought of sleeping on the ground. When you sleep in this tent, you’re on top of dirt and bugs. Depending on the environment, it might have a major impact on your sleeping temperature. Also, it’s more accessible to wildlife
  • Even the most inaccessible bugs and woodland creatures, such as raccoons, may still find their way up ladders and into your rooftop tent
  • It’s very cool. When was the last time you saw someone with a tent on their rooftop? Exactly. Because these sorts of tents are rather uncommon, they are considered to be quite cool due to their uniqueness. Apart from that, if you’re serious about upgrading your rig for overlanding, it significantly improves the whole visual package
  • Tent protection and durability are also much improved. One of the most advantageous qualities of a rooftop tent is that it never comes into contact with the ground, so avoiding all of the wear and tear caused by dirt, pebbles, sand, sticks, and bugs. The item is usually housed in a soft or hard case as well.

Cons of Rooftop Tents

  • It is necessary to have a proper car. Not every vehicle will have the suitable form, size, or be equipped with the appropriate equipment to accommodate rooftop tents
  • Nevertheless, most will be. It is necessary to have a roof rack and/or cross bars that are appropriate for the vehicle. Depending on whether or not you currently have the appropriate roof rack or crossbars, you may need to purchase them. Price. There’s no doubting that most roofs are pricey, especially when compared to a standard ground tent
  • But, there are some exceptions. Increases the height of the vehicle. Adding a rooftop tent increases the overall size and height of your vehicle, making it less suitable for maneuvering through tight spots. Weight has been added. Depending on the size of the tent, it may significantly increase the amount of weight that your vehicle must transport. If the vehicle is undersized or underpowered, this might have an impact on its performance, as well as. Fuel mileage is subject to a penalty. It will also have a negative impact on your fuel economy. Only campsites that are easily accessible by automobile are permitted. There are some of the greatest campsites that are inaccessible by automobile and require you to backpack or carry all of your camping equipment to the location. That is impossible to accomplish with a rooftop tent.

Crossbars or Roof Racks?

Before you can begin installing your new rooftop tent, you’ll need to be certain that you have the right foundation in place. Moreover, guess what? For this, you will need a solid pair of crossbars or a full-on roof rack, as opposed to merely using your vehicle’s roof. You’ll need to examine the weight capacities and capabilities of any crossbars that are already installed on your car if it has them. Remember to examine the load capabilities for both static (parked) and dynamic (moving) loads.

It may be necessary to replace the old crossbars with new ones, or to install a roof rack that is completely caged, if yours does not have adequate strength.

Placing a rooftop tent on a roof rack will be slightly different from installing a tent on crossbars, but the basic principles will remain the same for both situations.

The Job: How To Install a Rooftop Tent

Make use of these advice and recommendations to ensure that your new rooftop tent is installed safely and correctly. In this particular scenario, we’re talking about mounting the tent on the roof of a car using crossbars to hold it up.

The Safety Brief

If you want to build your rooftop tent safely, Car Bibles recommends that you do it in a safe manner. It is recommended that you use safety glasses and gloves to ensure that no stray metal spikes graze your skin or shoot into your eyes. Apart from that, when using an awrench, be careful not to slap a knuckle on something. If you are placing your tent inside a garage, double-check that your car will be able to depart the garage while the tent is still attached to the vehicle before proceeding.

Each tent will have somewhat different requirements for the specific components you will need to assemble it.

Tool kits are included with structures manufactured by Tepui, Cascadia Vehicle Tents, and Free Spirit Recreation, to name a few.


  • An allen wrench set, a ratchetingwrench, and a metalfile are all useful tools to have.


The length of some rooftop tents extends beyond the automobile, but others are self-contained structures. Front Runner captured this image.

Step-By-Step Installation

Although setting up your tent is not difficult, it is important not to hurry the process. Correct installation ensures that your tent will not be blown off the top of your car while it is in motion. Caution should be exercised.

  1. Tent installation is not difficult, but you should take your time and be thorough. When your tent is properly installed, it will not blow off the roof of your vehicle while you are driving. Caution should always be exercised.

The use of a second person might make the installation process smoother and faster. Thule took this photograph.

TheCar BiblesQuestionnaire

All of your burning questions will be answered by the Car Bible!

Q:Can you mount a tent to an aftermarket roof rack?

A:This question is a little more difficult to answer. The short answer is yes, but you should double-check with the tent manufacturer before making your final decision on which tent to purchase. Some racks will require minor adjustments in order to accommodate specific tents, so double-check with the tent or rack maker before making a final decision on which to purchase. Return shipping is quite expensive, and getting these tents to you is even more expensive.

Q:Can you mount a tent without crossbars?

As a result, we do not encourage it because there aren’t many manufacturers who recommend or provide that form of installation. It is possible to sandwich the side rails of your roof rack between the mounting tracks and steel mounting plates. But proceed with caution. If there isn’t a track lock on the rails, the tent may roll about on them. The crossbars guarantee that the tent does not move forward and backward while being transported in your car.

Q:Can you mount a tent on a trailer?

The answer is yes, as long as the trailer is equipped with the proper sort of crossbars. Because the tent will not be supported by crossbars, some custom fabrication will be required to attach it. There are a variety of crossbars that are designed expressly for use with trailers and are available for purchase.

See also:  Why Use An Suv Tent

Video Tutorials on Installing Your Rooftop Tent

So that you may have a better understanding of how things work, we’ve compiled a collection of installation films that demonstrate how different companies attach their rooftop tents to various car types. TepuiiKamperYakima ThuleSmittybuiltRoofnest Please be advised that is also a participant in the Amazon Services LLC Associates Programs, which is an affiliate advertising program designed to provide a means for web sites to earn advertising fees by advertising and linking to (hereinafter, “” or “ Associates Programs”).

There may be affiliate links to Amazon and its affiliate sites on the pages of this website, and the owner of this website will get a referral commission if you click on one of these links.

How do rooftop tents work A complete guide

What are the benefits of purchasing a rooftop tent? There are several advantages to using a rooftop tent, including the following: The thrill of the chase. Rooftop tents provide a unique opportunity to enjoy the great outdoors, no matter what the weather conditions are like. These tents are made to last a long time. They can withstand harsh weather better than ground tents and, unlike RVs, may be utilized in difficult terrain without compromising performance. There’s a view. As a result of rising above the ground, you will have a better perspective of the breathtaking nature that surrounds you and your tent.

  1. Simple to assemble.
  2. You don’t have to assemble a slew of poles and stake them into the ground, as you would with a ground tent.
  3. This means that you’ll be able to spend more time exploring and less time setting up camp.
  4. Most roof top tents are equipped with built-in mattresses, which are more comfortable than inflatable beds (particularly if they are deflated!).
  5. In addition, the tent’s level floor means that you won’t have to worry about knobby stones poking you in the back at night.
  6. These tents keep you up and out of the mud, snow, sand, and creatures that may be lurking about.
  7. Most of the time, the materials used to construct rooftop tents are specifically intended to survive extreme weather conditions better than those used to construct ground tents.

The rooftop tent is less expensive than a trailer, camper van, or recreational vehicle (RV), but it is still considered a mobile home because it is moved by automobile.

Additionally, they are capable of handling uneven terrain, making them ideal for off-road expeditions.

Because they are bigger, they are typically less adaptable than rooftop tents in terms of design.

What is the best way to set up a roof top tent?

Various types of rooftop tents are available, each with its own design and installation procedure.

  1. Placing the tent on the roof rack of your vehicle and sliding it into position
  2. The tent should be secured by bolting down the mounting gear that has been provided.

Remember to always refer to the documentation that came with your individual tent if you need more detailed instructions. What is the best way to utilize the rooftop tent? Once you’ve arrived at your location, how do you go about erecting your rooftop tent? There are two types of ground tents available: fold-out and pop-up, both of which are far faster to set up than regular ground tents. Fold-out: Soft-shell roof top tents are the most prevalent type of roof top tent. Simply remove the travel cover from the tent, extend the ladder, and unfold the structure.

  • Pop-up: Roof top tents with a sturdy shell are the most prevalent type.
  • That is all there is to it!
  • A number of people who are interested in roof top tents have inquired about this specific subject.
  • When setting up the tent, it can take anything from 4-6 minutes to open the tent, set up the windows, and attach the rainfly poles.
  • Where can you set up a roof top tent for camping?
  • Camping may be permitted in specified parking spaces, campgrounds, national parks, and other locations.
  • Apps such as iOverlander and Allstays can assist you in locating camping spots in your region that are permitted.

As soon as you’ve worked out how to utilize a rooftop tent, the next logical inquiry is: which rooftop tent is the most appropriate for me?

Hard shell versus soft shell roof top tents are two different types of roof top tents.

It is for this reason that they are even more convenient to set up and take down than soft shell roof top tents.

All of these qualities contribute to their popularity as overlanding and off-roading vehicles.

Tents with a soft shell for the roof: Tents with a soft shell are the most frequent form.

To open it, all you have to do is pull the ladder down and the tent will unfold.

Additionally, soft-shell tents can be equipped with an annex, which provides additional room beneath the tent.

For the benefit of families The largest roof top tents typically have a maximum weight capacity of roughly 650 lbs.

A roof top tent annex also provides you with more space for getting the kids ready in the morning, or even a separate sleeping area for the kids to sleep in.

Weekends and short getaways are ideal.

A tent like theThule Tepui Foothillfrees up room on the top of your car, making it more convenient to travel.

For those who like to take risks.

TheThule Tepui Ruggedizedseries is designed to withstand the test of time.

A tent like this is ideal for towing a 4X4 trailer or off-roading with a rig.

Hard-shell rooftop tents are also suitable for use on the beds of pickup trucks and jeeps. Because of the hardness of the material, they are particularly resistant to rain and wind. Accessories and features for a roof top tent

  • What is the best way to heat a roof top tent? Make use of aquilted insulator, which is a rooftop tent insulation that is fitted to your tent and attaches to the inside frame for additional protection from the elements. Because its material is thicker than that of ground tents, vehicle top tents are often warmer than ground tents. Not to mention the additional benefit of being elevated above the freezing ground
  • What is the benefit of using a roof top tent with an annex? Some roof top tents are equipped with an annex that may be detached. This provides you with more protected room to get dressed before heading out on an adventure or additional storage space for your things. Bedding: One of the advantages of a roof top tent is the fitted mattress that helps you to get a good night’s sleep after a long day of exploring. The mattress is already set up in the tent, so all you have to do is open the tent and get in. It is important to use an anti-condensation mat while setting up a tent since it will prevent the interior from becoming musty and wet. Outside your tent, hang a boot bag to collect your muddy shoes in order to keep the interior of your tent as clean and dry as possible (a difficult task while camping).

What is the best way to determine whether a roof top tent will fit your vehicle? As a result, we understand how critical it is to ensure that your rooftop tent is secure and safe. That is why it is critical that your tent be suitably sized for your vehicle. When determining whether or not a tent will fit in your vehicle, there are several factors to consider. Capacity for carrying a lot of weight

  • The dynamic weight capacity of your vehicle is the amount of weight it can bear when driving. This is the maximum weight capacity that has been established by the car manufacturer for your vehicle. To put it simply, it is the weight capacity required to support your rooftop tent. However, when your car is parked, your tent is set up, and a ladder is installed, its static weight capacity measures how much weight it can support at that point. Because of the additional support provided by the ladder, the static weight capacity is typically three times more than the dynamic weight capacity. This informs you how much weight is required to support the tent and the individuals sleeping within it.

Requirement for travel distance

  • Aluminum bars are located at the bottom of the tent, which are used to secure the tent to the roof of your car. You can’t have bars that are too wide for your vehicle. Please double-check the suggested distance needed in the tent’s handbook to ensure that it is compatible with your specific vehicle, or use our instructions to calculate it for you.

Roof Rack Compatibility

  • You will want to get an aftermarket roof rack since they have a larger weight capability than the majority of factory fitted roof racks that come with your vehicle. In order to support the tent’s dynamic weight, your rack must be capable of supporting it. Roof top tents are compatible with the majority of Thule roof racks. It is possible to determine whether or not your rack will work with our rooftop tents by consulting our buyer’s guide.
  • Roof top tents are compatible with all roof types, with the exception of bare roofs that lack tracks or rails (as illustrated below). It is perfectly OK to drive in a car with a sunroof, but not with a glass roof
See also:  What Does The Tent Represent In The Bible

With the exception of bare roofs that lack tracks or railings, roof top tents are compatible with all roof types (as illustrated below). It is fine to drive a car with a sunroof, but glass roofs are not.

Roof Top Tent Mounting Ideas (With Pictures)

Installing a roof top tent may be time-consuming, and it may take you a while to figure out just where you want it to be mounted on your car, trailer, or truck bed, depending on your preference. It was my intention to compile the material I had gathered from numerous pages of forums into a single, easily digestible post rather than wasting hours browsing through them. We’ll go through some of the numerous mounting options for your roof top tent (RTT), as well as the ideal locations to put them!

Where can you mount your roof top tent?

It should come as no surprise to you that the most frequent and straightforward method of installing an RTT is to attach it to the roof of your car. By attaching it to an aftermarket crossbar system as well as a permanent roof rack system, you may accomplish your goal. If you’re in the market for a roof rack, opting for a low-profile design will lessen the amount of wind resistance and fuel loss experienced when operating an RTT. Not only will the rack be positioned closer to the car, but so will the RTT as a whole.

By reducing drag while driving, you can enhance your fuel economy while also providing a much smoother ride for passengers.

If you have a tent that weighs 200 pounds, you will be better off investing in a permanent roof rack system that is capable of supporting that amount of weight.

There are several instances, as well as my own personal advice in it!


The next alternative for attaching an RTT is to purchase a trailer, preferably an overlanding trailer, which may be customized to your specifications. CVT overlapping trailers or FSR overlapping trailers are examples of trailers that I would suggest because they come with crossbars for the RTT already installed.

I have listed all of my favorite and must-have roof top tent essentialshereif you’re interested in shopping around!

When an RTT is mounted on a trailer, there are several advantages. First and foremost, it is simple to mount and unmount as necessary. If you want to put it on top of a vehicle’s roof, you don’t have to lift it quite as high. Next, you won’t have to be concerned about losing gas mileage or causing your car to wear out prematurely.

Many RTT owners leave it turned on all year, which puts additional strain on the drive train over time. Instead of worrying about the mounting procedure, you may just unhitch the trailer and move on with your life.

Truck options

Incorporating an RTT into a trailer has several advantages. For starters, it is simple to attach and unmount as necessary. In order to place it on top of a vehicle’s roof, you do not need to lift it nearly as high. Next, you won’t have to be concerned about losing gas mileage or causing your car to wear out prematurely because of the extra weight. Over time, the stress on your drive train increases as a result of many RTT owners leaving it on all year. Instead of worrying about the mounting process, you can just unhitch the trailer and leave it to us!

Positioning your roof top tent

The location of your RTT has a significant impact on the overall wear and tear of your vehicle. When putting your RTT on the roof of your car, you should strive to position the tent such that it is directly in the center of the vehicle’s interior. This contributes to the preservation of the normal weight distribution. This is by no means required, because with trucks or particular racks, this isn’t even a viable choice at all. Furthermore, some individuals just like to put the tent closer to the front so they can stow their belongings behind the RTT.

Several factors contribute to why many people prefer this configuration rather than opening it to either the passenger or driving side of the vehicle.

Mounting Systems for your roof top tent

The procedure of installing an RTT can be quite time-consuming. Not only do you require additional assistance, but ratcheting down all of the bolts is also time-consuming. By purchasing a fast release mounting system, you may reduce the setup time to a fraction of what it would otherwise be. For example, the Front Runner Slimline rapid release mechanism is an excellent illustration of this. After installing the clamps, you will never have to use any tools again to mount your RTT since they will be permanently secured in place.

This method is applicable to all RTT kinds.

Reduces the amount of bolt tightening required, and secures your tent to your rack for further security.

Not only will it save you a great deal of time, but they are also extremely safe and contain locking capabilities to protect your information.

Best practices for mounting a roof top tent

When installing an RTT, there are a number of critical parameters to be aware of. When it comes to a properly secured tent, knowing things like the dynamic weight limit and the width between crossbars are critical parameters to know. That’s why I wrote a really brief essay on how to set up a roof top tent in the first place. It’s a really concise and to-the-point tutorial that walks you through the process step by step.

Things to know before, during, and after the installation are all covered in this straightforward mounting guide, which includes photographs taken by me. To read my post on how to properly mount an RTT, please click here.

Wrapping up

The location and method of mounting your RTT might differ significantly. It all comes down to how much convenience you want, how much weight it can handle, how wind resistant it is, and a slew of other considerations. These are by far the most prevalent methods of mounting an RTT, and each has its own set of advantages and disadvantages. There is no one-size-fits-all solution when it comes to determining which mounting method is the finest because it will differ from person to person depending on their own preferences.

These are the most popular and safest methods of mounting a roof top tent on a house or building.

How to Install: Thule Rooftop Tent

Thule’s rooftop tent is ideal for those occasions when you want to camp for a night or two but don’t want to carry the whole rig. It is lightweight and easy to transport. In this video, you can see how simple it is to set up the system. A high-quality cotton mix canopy protects the tent from the elements, making Thule rooftop tents ideal for trips throughout the year. It is constructed of high-quality, UV- and mold-resistant materials and finishes (namely, a coated 600 denier 260G poly cotton blend).

Furthermore, the bag’s four huge inside pockets are ideal for carrying camping gear and other essentials.

ABOUT Thule ®

When it comes to Thule, we understand your desire to spend more time enjoying our interests and less time stressing about how to bring everything we need along with us. Thule has been innovating solutions to make life’s journeys more manageable for more than seven decades. Our efforts have been entirely devoted to the development of innovative, fashionable items that are ecologically friendly, of high quality, safe, and simple to use. All of this is done in order for you to bring the things that are most important to you.


Nick Jaynes’s /InCamping/ is a work of fiction. So you’ve made the decision to purchase a hard shell roof top tent. As a result, you’ll need to figure out what type of roof rack you’ll need to accommodate your swanky new system. This may appear to be a difficult task because there are so many different designs and brands available on the market. However, we’ve put together this brief guide to assist you in making an informed decision. If you don’t know what sort of car you have, it might be difficult to choose which roof rack is the most appropriate for your roof top tent setup.

Do I Need a Platform Rack for My Roof Top Tent?

Many people believe that, in order to place their roof top tent, they must purchase a huge and expensive platform roof rack, which is based on the example established by the overlanders. However, this is not the case. A roof top tent does not need the use of a slatted roof platform, despite the fact that they offer several advantages for transporting large and heavy items such as water cans, fuel cans, and firewood, among other things. This is due to the fact that the roof top tent is already a platform in and of itself.

It’s sturdy enough to sustain itself as well as a couple of inhabitants without the need for extra platform support beneath the surface of the platform.

See also:  Where Can I Buy A Grow Tent

Having said that, if you want to install a roof top tent as well as a few pieces of additional equipment on your vehicle’s roof, a platform rack may be a viable solution.

Examples include an outside channel system that can accommodate lighter-weight attachments, as well as optional crossbars that can be used to attach your favorite gear to the Falcon and Falcon XL.

Choosing the Right Crossbars for a Roof Top Tent

For those of you who aren’t intending on hauling around a lot of additional gear, all you really need is a nice pair of crossbars – and the ones you currently have could just suffice! However, there are a few factors to keep in mind before relying on the original crossbars on your car. In terms of design, many of these are thin and arched across the roof of the car as a result of concerns about aerodynamics during construction. As you might guess, an arched surface (albeit reasonably durable and undoubtedly aerodynamic) does not provide a level mounting platform for a flat-bottomed rooftop tent, despite its relative strength and aerodynamics.

Crossbars must be at least 30 inches apart, longitudinally, to support a hard shell roof top tent.

Weight capacity is the icing on the cake for the stock-crossbar-coffin design. Many off-the-shelf crossbars aren’t meant to support loads greater than 100 pounds, which is significantly less than the combined weight of a roof top tent plus a couple of individuals. In a nutshell, while stock crossbars are acceptable for a pair of skis, they are not necessarily the best choice for a hard shell roof top tent such as the Roofnest. In light of the fact that an overlanding-style platform rack may be excessive and that standard crossbars may be insufficient, what do you require to attach an RTT to your vehicle?

We prefer Malone bars because they’re just as durable as those from Thule or Yakima — at a fraction of the cost — and they operate with the largest range of cars without the need for any specific gear or mounting hardware.

However, we recommend that you choose a Malone or another well-known brand rather than a low-cost pair from eBay or Amazon since they will last longer.

Compatibility with Your RTT Rig

The unfortunate reality is that some automobiles are just not equipped to accommodate crossbars. The Chevrolet Cruze, which debuted in the last generation, is an excellent example. There are just no safe roof rack crossbar choices available for the Cruze due to the fact that its roof structure was not built to hold any type of roof top weight in the first instance. You’ll have a tough time figuring it out from a random eBay auction! To reiterate the point made above, established roof rack accessory brands can assist you in determining whether your vehicle has raised side rails to which crossbars like those from Malone can easily mount — or whether you’ll have to rely on often-hidden threaded holes buried in the roof of your vehicle.

There is no difference between the brand of crossbars you choose as long as they have a dynamic load rating of at least the weight of your Roofnest (dynamic refers to “moving” weight).

Fortunately, any crossbar setup that can dynamically support the weight of your Roofnest has more than enough strength and support to sustain the weight of you and your friends or pets sleeping inside the Roofnest when it is parked (just don’t go driving about with your pals in your Roofnest!).

Still Got Questions? Talk to an Expert

The process of selecting solid aftermarket crossbars versus just slapping your roof top tent onto the factory crossbars that came with your vehicle may seem more overwhelming at first, but taking the time to ensure that you have a sturdy and safe crossbar arrangement will pay benefits in the long run. You wouldn’t simply toss a $3,500 mountain bike on any ordinary roof rack, would you? No. You’d want to be certain that it would be able to reliably support your investment. The same may be said about your Roofnest as well.

Having trouble figuring out which roof rack layout is ideal for your particular vehicle and hard shell roof top tent type?

Get in touch with a Roofnest professional immediately.

You might also like

The shop will not function properly if cookies are deactivated on your computer or device. $1,169.00 (excluding of tax and shipping) Currently in stock When fully assembled, this roof top tent is 1.3 meters wide by 2.4 meters long. The super-low 330mm profile decreases wind resistance while driving and lowers the vehicle’s overall height by almost one meter. The Front Runner Roof Top Tent has the lowest profile of any roof top tent currently available on the market! In order to purchase Roof Top Tent by Front Runner, you must purchase it in multiples of 1.

  • Equipment and guidance that has been tested and proven You may put your faith in us. Money refund guarantee for 30 days Guarantee
  • Off-road construction was used. Tough
  • Easily attaches to the top of your Front Runner Roof Rack to provide quick, easy, and comfortable shelter wherever you go
  • Sleeps 2+ people in comfort
  • An immediate bedroom is created with a single seamless motion. Weighing only 43kg, it is far lighter than all other comparable roof top sleeping options now available on the market. The body of the tent is made of 260g poly-cotton ripstop fabric, which is water-resistant and durable. Full-coverage rainfly made of waterproof, UV-resistant 400d polyester oxford fabric for maximum protection. With the help of convenient side-release buckles, you may simply remove or install the item as needed. A solid, insulated foundation is provided by a durable base consisting of an aluminum frame, sheeting, and dense foam core. High-density foam mattress (6cm / 2.25″ thick) with a machine-washable, moisture- and mildew-resistant polyester oxford fabric cover for added comfort
  • It is possible to unzip skylight vent windows in the roof to allow for fresh air, sunshine, and starry views, or they can be sealed to trap heat and keep out the weather
  • The side window privacy panels zip up to close, allowing the size of the aperture to be modified according to privacy requirements or weather circumstances
  • The side window privacy panels zip up to close
  • A total of two hanging pockets give enough storage space for personal belongings (34cm by 22cm / 13.5″ by 8.5″)
  • The heavy-duty 650g nylon tent cover is made of durable PVC coating and will protect your tent when it is packed and in transportation. Tracks for mounting (included) can be installed either from the front to the back or from side to side, depending on your requirements. Included are universal mounting plates as well as all essential hardware. Upgrade to our Quick Release Tent Mount Kit for faster and simpler installation and disassembly. Incorporate a handy shelter below with ourRoof Top Tent Annex, which slides simply into the channel of the tent foundation
  • It comes with an integrated sliding aluminum ladder. The weight limit for the ladder is 180kg/400lbs.

It should be noted that if the tent installation height is greater than 2 meters, you will want a Tent Extension Ladder. NOTE: Front Runner Tent Mounts:Tent Mount Kit,Tent Mount Kit / TallorQuick Release Tent Mount,Tent Mount Kit/ TallorQuick Release Tent Mount The following are the recommended mounting techniques for this Tent. The set includes:1 x Tent 1 piece of flysheet 1 × Bed (mattress) 1 × Tent with a cover 1 x Sliding stairwell 1 × Rod & Reel Kit Mounting studs are included with this package.

Rainfly made of 400d polyester oxford that is waterproof and UV resistant.

Padding for Mattresses: 60mm ” (2.25″) thick polyurethane foam with a high density 650g heavy-duty PVC for the tent cover; aluminum sheeting and side rails with foam core for the tent base.

Dimensions of the tent: 1330mm when closed (including cover and ladder) ” (52.4″) Dimensions: 1245mm (49″) L x 330mm (13″) W (13″) Height with cover and ladder: 1295mm Height without cover and ladder: ” (51″) 1220mm L x 1220mm W ” (48″) 216mm W x 216mm H ” (8.5″) Dimensions of the HOpen: 3330mm for the outside with a rainfly ” (131″) 1330mm (48″) L x 2290mm (90″) W x 1330mm (48″) (52.4″) Interior Dimensions: 2438mm ” (96″) 1295mm L x 1295mm W ” (51″) 1168mm W x 1168mm H ” (46″) L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L (A Peak) Dimensions of the mattress:1990mm ” (78.4″) 1210mm (47.2″) L x 1210mm (47.2″) W x 60mm (2.4″) HWeight:43 kilograms (93lbs) Load Capacity: 270kg (600lbs) In order to access the fitting instructions, you must have Adobe Acrobat Reader installed.

ARB Simpson III Rooftop Tent Set-Up guide

*To access the fitting instructions, you’ll need a PDF reader.

  • They’re all packaged together and can be transported anywhere your rig travels without taking up valuable storage space. It is suitable for usage on any terrain. Unlike a ground tent, you won’t have to be concerned about the surface of the ground. Water, mosquitoes, and animals are kept at bay since your bed is elevated above the ground
  • They offer a considerable quantity of room as well as excellent climate control.

However, one aspect that distinguishes the ARB Simpson III Rooftop Tent from the competition is its ease of assembly. Prepare for your next excursion by following along with the step-by-step instructions provided.

Leave a Comment

Your email address will not be published. Required fields are marked *