How To Hang Carbon Filter In Grow Tent

How To Set Up a Carbon Filter In A Grow Tent

It’s important to remember that while growing inside, the last thing you want is for musty plant aromas to fill your house, unless you’re growing something fragrant and gorgeous. Indoor growth can also create smells and toxins that are potentially harmful, such as those produced by soil, fertilizers, and the plants themselves. The most effective remedy for this would be to incorporate activated carbon filters into your airflow system in order to control smells and pollutants. Using this article, I’ll teach you how to set up a carbon filter in your grow tent, which will allow you to manage and clean the air while still keeping effective circulation.

First let’s start with all the stuff you will need:

  1. Filter with carbon that is appropriate for the size of your growing tent
  2. There are a variety of sizes available, but most commonly they are available in 4, 6, and 8 inch widths
  3. To connect your carbon filter to the fan, you’ll need aluminium ducting or another form of ducting
  4. Normally, this is included with the carbon filter so you won’t have to seek for ducting that fits the size of your carbon filter
  5. Heavy-duty rope clip hangers and other hanging devices are available. Duct clips are used to provide an airtight seal between your fan and the fitting
  6. You’ll need an appropriateextractor fan for your grow tent to keep the airflow under control. Duct tape is used to produce a more secure closure. (Aff.links)

Once you’ve gathered everything, you’ll be able to begin setting up your carbon filter in your groom room.

Let’s Begin!

As soon as you’ve gathered everything, you may begin setting up your carbon filter in the groom chamber.

Does it matter if the carbon filter is outside or inside?

Once you’ve gathered your materials, you’ll be able to begin setting up your carbon filter in your groom room.

How can i reduce the noise and make it smell nicer?

Once you’ve gathered everything, you’ll be ready to set up your carbon filter in your groom room.

HOW TO SET UP A CARBON FILTER IN A GROW TENT

Make your grow tent clean and odor-free by properly installing a carbon filter system and an inline fan system in your growing space. When growing plants inside, there may be a lot of undesirable scents and potential pollutant issues that can be harmful to both you and your plants’ health if not addressed. Installing a carbon filter and an inline fan system in your grow tent will help to alleviate both of these problems. Mold and mildew contamination concerns are often resolved by maintaining a proactive and clean garden, however not everyone is as conscientious as you may think.

  • But how can you assure that it is correctly configured to clean the air in the manner in which it is intended to do so?
  • I’ll go over the most prevalent layouts and explain why one is preferable to the other and why.
  • Conduit should be run from the filter to the fan and then from the fan to the exterior of the tent.
  • METHOD 2METHOD 2: INSTALL FILTER INSIDEFAN OUTSIDE GROW TENT METHOD 2METHOD 2: INSTALL FILTER INSIDEFAN OUTSIDE GROW TENT The filter should be attached to the inside of your tent near the exhaust vent, as specified in the instructions.
  • Check to see that the fan is sucking air from the interior of the tent out to the outside.
  • Install ducting from the fan to the exhaust port and then to the filter outside the tent to complete the installation.
  • THE FOURTH METHODOLOGYMETHODOLOGY 4: INSTALL BOTH FANFILTER OUTSIDE THE GROW TENT Directions: Attach ducting to the top of your grow tent, near the exhaust port, and secure it in place.
  • Attach the filter to the fan and check to see that the fan is sucking air from the interior of the tent out to the outside.
  • While any of these configurations will produce the intended result, the first configuration is the most effective.
  • For the second time, the majority of inline fans now on the market indicate in their user manuals that the air entering the fan must be filtered in order to avoid damage or increased wear and tear over time.

Your carbon filter and inline fan are now ready for installation! Make sure to check out my equipment recommendations page for the greatest grow goods available on the market today. Purchase everything you require now and begin developing right away! ​

How to Hang Exhaust Fan in Grow Tent? The Ultimate Step By Step Guide

Who doesn’t appreciate the beauty of nature? I believe that everyone desires the freshness of the plants that surround them. As a result, gardening is growing increasingly popular on a daily basis. Plants, on the other hand, have their own set of requirements. Their need for a moderate wind and an inversion of the atmosphere, which may be difficult to achieve when cultivated inside, is understandable. So, what exactly are we looking for? What is the best way to hang an exhaust fan in a grow tent?

  1. After that, connect the carbon filter to the exhaust fan and check that the fan is in the proper location.
  2. Growing plants in grow tents necessitates the use of ventilation in this situation.
  3. However, in order to keep the grow tent and the plants within in good condition, you must meet the needs of the plants.
  4. You must ensure that your plants receive excellent quality airflow in order for them to grow properly.

How To Hang Exhaust Fan In Grow Tent? Step By Step Guide

The Best Way to Hang an Exhaust Fan in a Grow Tent Step-by-Step Instructions The extraction system for a grow tent is comprised of three basic steps: preparing the carbon filter, hanging the exhaust fan in the grow tent, and installing the ducting system in the grow tent.

Step 1 – Prepare The Carbon Filter

To begin, you must prepare the carbon filter by wetting it with water. In order to prepare for this, you must first uncover the item by removing the protective plastic coating. More information may be found at: How To Make A Carbon Air Filter For Your Grow Tent.

Step 2 – Get The Screws Back

In order to use the carbon filter, it must first be prepared. It is necessary to expose the item by removing the protective plastic coating in order to prepare it. How To Make A Carbon Air Filter For Your Grow Tent (for more information)

Step 3 – Cover The Plate

The dust cover should now be placed on top of the plate to protect it.

Step 4 – Connect The Carbon Filter With The Exhaust Fan

Now is the time to cover the plate with the dust cap.

Step 5 – Insert One Blade Into The Paper

Make use of your scissors to cut a single blade of one of them into the foil paper at the end of your ducting and then extend out the ducts once more around the perimeter.

Step 6 – Use Shearing MachineWire Cutter

Because the ducting pieces are moving in a spiral motion, it is impossible to separate them. As a result, the cut may come close to meeting the opposite side but will not be able to be separated. The shearing machine and wire cutter are required to separate them at the point where the foil is cut in order to do this.

Step 6 – Continue!

Now take the jack chain and cut it into two equal parts so that you may hang the filter and the exhaust fan with ducting from it.

Two portions will adhere to the ends of the duct on opposite sides. As previously mentioned, two separate ducts will be used to connect both the exhaust fan and the carbon filter, with two duct clips on either end of each duct.

Step 7 – Hung Together

It will be necessary to hang the carbon filter and exhaust fan together outside the tent using an ehanging rail before they can be attached in place. Slide one end of the tiny vent duct onto the flange plate, attach the duct clip, and tighten it with screws using a screwdriver.

Step 8 – Placement of the Exhaust Fan

Following that, an arrow will be painted on the surface of the exhaust fan to indicate the direction of airflow. Please make sure that this arrow points in the opposite direction of the carbon filter since the exhaust fan will suck the air that is coming from the carbon filter rather than blowing it through the filter. As a result, when installing the filter and exhaust fan in the grow tent, it is critical to pay attention to the direction of the fan and filter.

Step 9 – Final Check!

Slide the duct over the flange all the way around on the tiny end of the ducting and attach it with another duct clip at the other end. Then, with the last duct clip, tighten the ducting by sliding the long end over the opposite end of the ducting. It is recommended that this extraction system be positioned as high as possible in order for the air to move through it correctly. That is why it is advisable to build a grow tent ceiling rather than a floor. In order to hang the exhaust fan and filter outside the tent, you must raise them while they are suspended by the jack chain from the tent frame.

Because it will be more comfortable for you and you will not require any assistance, it is advised that you elevate them while they are not linked.

Support the exhaust fan with the straps attached to the filter and jack chain, and connect them to the hanging rail using the hanging rail connector.

I hope you were able to find the answer to the question “How to hang exhaust fan in grow tent?”

What Are The Effects of The Ventilation System On Plants?

The Influence of the Ventilation System on Plant Growth “How to hang exhaust fan in grow tent” is now something you know. But have you ever considered it? What are the ramifications of having that exhaust fan running? The fact that you are growing plants indoors means you must give them with the best environment possible in comparison to what they would receive if they were growing outside. Plants require a carbon dioxide-rich environment in order to develop properly. Plants can come in contact with an acceptable quantity of CO2 from the atmosphere while they are growing in the open air.

Plant development can be hindered in a variety of ways if this is not the case.

The exhaust fan installed in a grow tent allows us to give them with fresh air, but not too much or too little, which allows them to develop more quickly while also maintaining the humidity and temperature within the grow tent.

Although learning how to hang exhaust fan in grow tent is a difficult configuration to master since it necessitates the use of several methods and tips, as well as certain strategies, it is not difficult if you grasp the procedure completely.

The health of the plant will be improved as a result of this approach. It will aid with the removal of foul odors and excessive heat from within the grow tent, as well as the maintenance of the temperature essential for plant growth.

What Are The Benefits of Installing Exhaust Fan In Grow Tent?

“How to hang exhaust fan in grow tent” is now something you know. But have you ever considered it? What are the advantages of having an exhaust fan installed?

See also:  How To Make A Camping Tent

1. Reduction of Noise

The installation of an exhaust fan within the ceiling will assist you in reducing the amount of noise generated by the grow tent. You will benefit if you want your grow room to be silent and if it has an appropriate ceiling system on which you can put an exhaust fan, which is what I recommend.

2. Greater Capacity To Pass The Air

Hanging the exhaust fan in the grow tent will be beneficial because, with the help of this inline fan, you will be able to adjust the distance between the extraction point and the outlet ports. Air will be able to travel through more easily if the space between the two points is increased.

3. Making Several Outlets

The DIY technique allows you to create a large number of exits and intake locations. It is necessary to have these exits and intake points if you are employing a large grow area for your plants.

How Does The Exhaust Fan Work?

The Influence of the Ventilation System on Plant Growth It is something that is utilized to collect waste from a space outside of it that is referred to as an exhaust fan. For example, if you utilize an exhaust fan in your plant grow room, it will remove the foul odor, the air, the waste, and the humidity from the area outside of the tent. It is necessary to position the fan at a location where air may readily travel through the fan. The fan’s capacity to circulate air is determined by the height of the ceiling, the size of the space, and your ability to hang an exhaust fan in a grow tent in the appropriate manner.

You can learn more about the finest grow tent fans in 2022 by visiting our website.

What Are Components Do We Need To Install An Oscillating Fan In Grow Tent?

HVAC Exhaust Intake Fan, Low Noise, 4 inch Inline Duct Fan, 100 CFM, VIVOSUN Grounded Power Cord with an Extra Long Length of 5.5′ An input vent is required for the extraction system, which will also function as the extraction point in the grow tent. This vent will be used to evacuate air from the interior of your tent. Intake vents are available in a variety of shapes, sizes, and prices. You must select yours based on the size of your tent as well as your financial constraints. The smaller ones are preferable for usage since they limit the distance over which the air must travel.

2. Ducting

Suitable for heating, cooling, ventilation, and exhaust. AC Infinity Flexible 4-Inch Aluminum Ducting with Heavy Duty Four-Layer Protection, 25-Feet in Length When installing your extraction system, you will want ducting since hanging your fan and filter without it would be difficult to do. It is possible that ducting will be required to connect the internal vent to the motor and the motor to the exterior vent. There are several different forms of ducting, including flexible ducting, semi-rigid ducting, and insulated ducting.

3. Exhaust Fan

The AC Infinity Flexible 4-Inch Aluminum Ducting with Heavy-Duty Four-Layer Protection is 25 feet long, and it may be used for heating cooling ventilation and exhaust applications. When installing your extraction system, you will want ducting since hanging your fan and filter without it would be difficult to complete. For the internal vent to connect with the motor and for the motor to connect with an external vent you may need to install ductwork.

Many different forms of ducting exist, including flexible, semi-rigid, and insulated types. Flexible ducting is the most often used variety. It is the most popular since it can be flexed in any direction to meet your needs.

4. Exhaust Fan Calculator

AC Infinity Flexible 4-Inch Aluminum Ducting, Heavy-Duty Four-Layer Protection, 25-Feet Long For Heating Cooling Ventilation And Exhaust Without ducting, it will be difficult to suspend your fan and filter from your extraction system. It is possible that you will require ducting to connect the internal vent to the motor and the motor to the exterior vent. There are many different types of ducting available, including flexible, semi-rigid, and insulated ducting. Since flexible ducting may be bent in any direction, it is the most common.

5. External Vent

With its 4′ hood, the Deflecto Supurr-Vent Louvered Outdoor Dryer Vent Cover (HS4W/18) provides a stylish and functional solution for drying clothes outside. Last but not least, the exterior vent is a critical component of your extraction system. You have the option of mounting the external vent on the exterior wall of your tent or through the hanging rail; the decision is entirely up to you. Another option is to install a backdraft shutter, which will decrease the backflow of air going through the system while simultaneously shutting off the system while the fan is not in use.

How To Hang Oscillating Fan In Grow Tent? Step By Step Guide

Hanging an oscillating fan in a grow tent is a simple process. Some gardeners may not wish to utilize ducting in conjunction with an exhaust fan and filter, and they may choose for oscillating fans rather than an exhaust fan with or without ducting since oscillating fans are less expensive than other types of exhaust fans. Oscillating fans are sometimes preferable to exhaust fans because they may oscillate, allowing for a pleasant breeze to be delivered without blowing on a specific location for an extended period of time.

I’ll demonstrate how to hang an oscillating fan in a grow tent, which I found to be both simple and time-consuming to put up in my experience.

Step 1 – Use Offset Flange

Use the offset flange black with screw holes to attach it to the tent pillars, which is included with the tent. You must connect two black flanges to the back wall of the tent, one to each of the cornerstones of the two corners of the back wall. Make an effort to get the flange as near to the roof as feasible. Then you’ll need to attach a long wood piece to the corner flanges, which will be held together with screws.

Step 2 – Secure The Oscillating Fan

You must fasten your oscillating fan with the wood piece in any location you deem necessary based on your requirements. Once you have completed the installation of the entire procedure, your extraction system will be ready for use. Now all you have to do is connect in the power cord, and your plants will be ready to move inside! If you follow the steps outlined above correctly, you can be confident that your plants will receive the proper airflow and atmosphere to thrive even more than they did previously.

Keep in mind that the technique of removing and installing your plants will determine whether or not your plants develop properly. The more precisely you hang your exhaust fan, the higher the quality of the airflow you will receive and the greater the yield you will receive from your tent will be.

What Are The Facts That You Have To Be Careful About While Hanging an Oscillating Fan In Grow Tent?

In order to properly hang an oscillating fan in a grow tent, there are a few considerations that must be taken into consideration. Never allow your fan to blow wind directly into or into your plants. It should only blow wind around the plants, not directly upon them. In addition, excessive wind will cause your plants to be clawed by the wind. When an excessive amount of airflow blows onto plants, it causes wind-burned, which causes the plants to claw. When you notice the clawed plants, you could assume that the clawing is the result of overwatering or underwatering, but the most likely reason will be over-winding of the plants.

Be Careful About The Arrow

Keep an eye out for the arrow on the fan’s surface, which will tell you to the location where the exhaust fan and carbon filter should be installed. It is important not to direct the exhaust fan toward the carbon filter; otherwise, it will have a negative effect.

Take Care of The Oscillation

In the case of an oscillating fan, you should pay attention to whether or not the oscillation is functioning properly. A failure to do so will result in noise when the system is unable to oscillate normally.

Use An Exhaust Fan Calculator

The exhausting system must be checked using anexhaust fancalculator since the general temperature, humidity, airflow speed, and other variables are all aspects that must be considered in order for your plants to thrive properly in their environment.

Maintain The Diameter

Maintain the diameter of the ducting and the exhausting fan, since this is an important safety factor to consider.

Be Careful About The Cheap Ducting Fans

If you can afford better ducting fans, don’t get the cheap ones. They may claim to be able to blow a lot of air based on their CFM rate, but in reality, they don’t have nearly as much power to blow as you may expect. As a result, pick your fan carefully.

Choose As Your Room Size

You must select the duct, filter, and fans based on the size of your room or tent as well as the cost of each item. If you have a tiny tent, you should avoid purchasing a larger fan.

Ensure Better Placement

As much as feasible, hang your exhaust fan as close to the roof as possible since the higher up your exhaust fan is positioned, the more airflow you will obtain from it.

Check Regularly

As much as feasible, hang your exhaust fan as close to the roof as possible, because the higher up your exhaust fan is mounted, the more airflow you will obtain from it.

Seal The System

It is necessary to seal the entire exhausting system after utilizing it since it is beneficial in increasing the efficiency of the system. When employing a carbon filter and an exhausting system, it is critical to ensure that the air is adequately ventilated from the grow room; otherwise, the air will flow through without being properly vented. The major function of the exhausting fan is to provide suction, which is very hard to achieve without a seal.

Make Sure There is No Leakage

Check for leaks at the junction between the filter and the fan if you’re using a carbon filter to ensure that no air is leaking through the filter.

Final Check!

Finally, cleaning your exhaust fan is critical because if it is not cleaned, it will not function correctly and the temperature inside the tent will rise, which will limit plant development.

Final Verdict

So, I hope you have a better understanding of how to hang an exhaust fan in a grow tent. Nevertheless, if you are experiencing difficulties, you may contact us by email. We can aid you in resolving the situation. Last updated on January 28, 2022 / Affiliate links included / Images sourced from the Amazon Product Advertising API

Quick Answer: How To Hang Carbon Filter In Grow Tent

After reading this article, I hope you understand how to install an exhaust fan in a grow tent. If you are experiencing difficulties, you may contact us via email. In order to fix it, we can help you. Affiliation links and images from the Amazon Product Advertising API were used in this post.

Where does the carbon filter go in a grow tent?

The location that comes highly recommended. The carbon filter should be installed at the beginning of your ducting route, as shown in the diagram. That is, putting it inside your grow tent around the point where your ducting starts. For those who utilize metal halide or high pressure sodium (HPS) grow lights with duct ports, this is a typical configuration.

See also:  How To Make Co2 For Grow Tent

Can you have too much airflow in grow tent?

Having an excessive amount of CFM flow in your tent is not necessarily an issue, unless you don’t have enough passive intake ports and the tent walls are bending in, in which case the fan will be put under undue stress. In such situation, you may also use active input fans to aid in the system’s overall balance.

Do I need carbon filter for 2 plants?

It’s likely that you’ll require a filter or an odor concealer when you’re flowering your plants, assuming you’ve done a decent job. It’s best to be on the safe side. You don’t want to make a mess of your living space only to get two plants’ worth of bud. There are a plethora of methods available for masking or concealing the scent.

Should I run my carbon filter 24 7?

During veg stage, you should run the inline fan continuously, but if you want to extend the life of your carbon filter, you shouldn’t have it connected at all during flower stage. Only when the buds begin to give off their aroma should it be connected during flower stage if you need it to mask the smell. During the growing process, mine are unhooked until I need to filter the smell.

How long does a carbon filter last?

To put it simply, carbon filters need to be replaced after 18-24 months of continuous (24/7/365) use. Depending on how harsh the environment is, they can endure up to 4 years. This lifetime, on the other hand, is dependent on the carbon quality, consumption, humidity, and plant species, among other factors.

What size fan for 5×5 grow tent?

Broadly speaking, it is recommended that carbon filters be replaced after 18-24 months of consistent (24/7) use. They can endure up to 4 years in less demanding environments. However, the quality of the carbon, the amount of carbon used, the humidity, the type of plant, and other factors influence the longevity of a carbon dioxide trap.

Do carbon filters work both ways?

They have the prefilter on the outside of the carbon, so you would have to do something about it. You may use the carbon either way around. When carbons are dragged through, they do not perform better. In fact, when pushed through, they perform better, which is especially true at lower fan speed settings.

What size light for 5×5 grow tent?

While the carbon may be used in either direction, the fact that they have the prefilter on the exterior means that you would have to do some action.

When carbons are pulled through, they do not function better. They actually perform better when they’re pushed through the system, which is particularly true at lower fan speeds.

Should exhaust fan always be on in grow tent?

Explanation in mathematics: In practically every grow tent, an exhaust should be used to circulate the air within every three minutes to keep it fresh. The use of a tent-size calculation, on the other hand, is highly advised for accuracy.

Do I really need a carbon filter for my grow tent?

When it comes to growing tents and grow rooms, activated carbon filters are commonly utilized to decrease smells and regulate emissions. In the end, you will have cleaner air that is free of odors, spores, and other allergies. Odors and emissions have an impact on how pleasant your house is to live in; they may be uncomfortable at the very least and potentially dangerous at the very worst.

What size exhaust fan for 5×5 grow tent?

Another 6 or 8-inch fan should be used for tent exhaust. This fan should be mounted again outside the tent, this time near to the outside air opening. If you are concerned about stinking air blowing outside the tent, you may hang the necessary charcoal filter inside the tent. This will prevent this from happening.

How do you install a carbon filter?

A second 6 or 8-inch fan should be used to ventilate the tent. This fan should be mounted again outside the tent, this time near the outside air opening. In the event that you’re concerned about stinking air blowing outside the tent, you may hang the suitable charcoal filter inside the tent.

Do carbon filters get rid of all the smell?

Carbon filters (also known as ‘carbon scrubbers’) are capable of physically pulling scents from the air and neutralizing any aromas that do travel through them. Carbon filters are required if it is necessary to neutralize the air that is expelled from your vehicle’s exhaust.

Can you leave your grow tent open?

Carbon filters (also known as ‘carbon scrubbers’) are capable of physically pulling scents from the air and neutralizing any aromas that do pass through the filtering system. Carbon filters are required if it is necessary to neutralize the air that is expelled from your vehicle’s engine.

What size carbon filter for 4×4 grow tent?

What size carbon filter do you recommend for a 4×4 tent? In the majority of circumstances, a 4-inch carbon filter will be sufficient for a 44 camping tent. The fact that a 44 tent has a relatively limited interior volume means that a 4-inch carbon filter should be able to effectively remove any smells from the air before they are expelled from the tent.

Does a carbon filter have to vent outside?

It is not required to exhaust the air that is drawn through the carbon filter outside of your growing area; in fact, depending on your configuration, it may even be preferable to have the filtered air returned to the growing area immediately.

What size carbon filter for 5×5 grow tent?

Table of Carbon Filter Sizes based on Grow Tent Dimensions Size of a Serial Grow Tent Dimensions of the carbon filter 3 5 5 6-inch or larger, or 6″x12″ or 8″x12″ 4 2 2 4-inch 5 4 8 8-inch filter 3 5 5 6-inch or larger, or 6″x12″ or 8″x12″ 6 1010 8-inch filters or an 8’x24′ carbon filter are required.

Does my grow tent need to vent outside?

We all want fresh air, and a closed environment like as a grow tent is not equipped with any ventilation by its very nature.

Increased heat generated by grow lights can be harmful to plants if the temperature inside the grow tent rises beyond a certain threshold. The tent’s ventilation system exchanges the heated air inside with cooler air from the outside.

Can I put my carbon filter outside grow tent?

Perhaps your grow tent isn’t up to the task of housing a 16-pound carbon filter in the first place. In this case, you’re considering installing the carbon filter outside the grow tent. Despite this, it may have certain unintended repercussions. However, it is still feasible to retain the carbon filter outside the tent and ventilate the air so that it does not smell.

The Best Place to Install Your Carbon Filter

Perhaps your grow tent isn’t up to the task of accommodating a 16-pound carbon filter in the first place? In this case, you’re considering locating the carbon filter outside the grow tent. There might be some negative effects to this, though. The carbon filter may, however, be kept outdoors and the air can still be vented without smelling.

The Most Recommended Location

The carbon filter should be installed at the beginning of your ducting route, as shown in the diagram. That is, putting it inside your grow tent around the point where your ducting starts. For those who utilize metal halide or high pressure sodium (HPS) grow lights with duct ports, this is a typical configuration. Placing a carbon filter at the beginning of your ducting reduces the likelihood of odors escaping from your grow tent and into the environment. In addition, because the inline duct fan removes both smelly and hot air from the grow tent at the same time, this orientation is referred to as complete or efficient.

Other Locations

Because of the size of your grow tent, you may have to organize your equipment in a different manner at times. Possibly, the number of duct bends required to accommodate your inline fan, grow lamp, and carbon filter is excessive, resulting in reduced airflow. It is possible to put your carbon filter outside your grow tent if your grow tent does not allow for all three elements to fit inside. In certain cases, putting it at the end of your ductwork may be a possibility, especially if the ducting is totally air sealed.

If you’re not using a grow light hood, you may also attach your carbon filter straight to your inline fan, which will save you money.

No matter where you place your grow tent and ducting, air sealing them will be essential in preventing any leaks from occurring.

How to Set up a Carbon Filter in a Grow Tent or Grow Box

If you’re growing inside, the last thing you want is for your house to smell like a musty plant, unless, of course, you’re growing something that smells delicious! Using this brief tutorial, I’ll walk you through the process of installing a carbon filter in your grow tent.

Please keep in mind that there are many other ways to set up a carbon filter inside your grow tent, and this is just one of them that is extremely simple to do. First and foremost, you’ll require the following miscellaneous items:

  1. If you’re growing inside, the last thing you want is for your house to smell like a musty plant, unless, of course, you’re growing something that smells really delicious. You will learn how to install a carbon filter in your grow tent in this short instruction. There are many different ways to set up a carbon filter inside your grow tent, and this is just one of them. It is also quite simple. To begin, you’ll require the following miscellaneous supplies:

Once you’ve gathered the materials, you’ll be able to set up your carbon filter in your groom room in five simple stages.

  1. You’ll be ready to set up your carbon filter in your groom room in five simple steps once you’ve gathered all of your materials.

You’ve completed your task! An example of a carbon filter installed within a grow tent may be seen below. There are several different ways to skin a cathang a filter, including: One often asked issue we receive here at GrowGenius.co.uk is whether the carbon filter / fan should be placed inside or outside the grow tent. The answer is easy — you can do both at the same time! Ensure that your extractor fan draws all of the air from your grow room out via your carbon filter. It doesn’t matter which direction your extractor fan is configured as long as all of the air is passing through the filter.

As a result, carbon filters and extractor fans might create a lot of noise at times.

  • Install your extractor against a wall to reduce vibration. If you like, you may hang your extractor fan inside the grow tent next to the filter
  • Set an air freshener with a sponge inside your filter to provide a nice fragrance throughout your grow space. Upgrade of acoustic ducting in order to reduce vibrational noise

Carbon Filter Outside Grow Tent- Guide & Warnings

Home»Environment»Carbon Filter Outside Grow Tent- GuideWarnings9075Views0 Carbon Filter Outside Grow Tent- GuideWarnings9075Views0 Perhaps your grow tent isn’t up to the task of housing a 16-pound carbon filter in the first place. However, you still want it to be there in order to filter out the foul odor. In this case, you’re considering installing the carbon filter outside the grow tent. Despite this, it may have certain unintended repercussions. However, it is still feasible to retain the carbon filter outside the tent and ventilate the air so that it does not smell.

See also:  What Causes Eyes To Have Yellow Tent

Keep an eye out for more information.

Why Put The Carbon Filter Outside Tent?

First and first, this is not a suggested course of action in any way. First and foremost, you should keep your carbon filter (as well as your fan) inside the tent. However, if you find yourself in any of the following scenarios, you may need to reconsider your position-

Your grow tent size is too small

Carbon filters are typically 6″ or 4″ in diameter with a length ranging from 16″ to 24″ in length. If the size of your grow tent is between 10 and 30 square meters (24, 48, 48, etc.), you may have difficulty accommodating the filter.

Your tent might not be strong enough

You can’t always rely on the strength of your grow tent to keep you safe from the elements. As a result, hanging a 16-20 pound carbon filter might become dangerous. Furthermore, if it is knocked from its perch, it has the potential to start a fire, destroying all of the plants in an instant.

You Don’t Want to Waste Grow Space

When the carbon filter is too heavy or too huge to be suspended from the grow tent roof, many of us may consider placing it on the floor of the grow tent instead. However, this takes up a significant amount of your growing area, which is at a premium. Another advantage is that it will bring warm air down to the plants, which is detrimental for a high harvest. The most ideal alternative to this design is to retain the fan within the tent and the carbon filter outside the tent, which is the most desirable solution.

Items You Need

  1. The carbon filter
  2. The inline fan
  3. The inline fan silencer (which is only applicable to setup 2)
  4. Kit for flanging ductwork. (In order to make airtight holes in the grow tent)
  5. The following tools are required: a box cutter or wire cutter (for cutting ducting)
  6. Duct clamps (for securing tight connections)
  7. And duct tape (for a more secure seal).

Setting up the Carbon Filter Outside Grow Tent

The following instructions will walk you through the process of installing a carbon filter outside your grow tent. But, before we get started, I believe you should recognize something really crucial! Carbon filters are most often the first step in the process of developing a grow room ventilation system. As a result, the air first passes through the filter, where it is cleansed of unpleasant compounds. Because it sucks air through it, a carbon filter is utilized as an exhaust filter in vehicles.

When you move the filter outside, it will no longer be able to pull air in the same manner. Instead, air is blasted into the filter, which then serves as an intake filter for the engine. With that assumption in mind, below are the two types of setups and the actions to complete them:

Setup Guide 1: Fan Inside- Filter Outside

We’ll go over the process of putting a carbon filter outside the grow tent in this phase. Prior to getting started, I believe it is vital for you to recognize something. Carbon filters are most often the first step in the process of developing a grow room ventilationsystem. Consequently, the air passes through the filter and is cleansed of foul odors and chemical contaminants. In order to exhaust the air that passes through it, a carbon filter is utilized as a filter. By moving the filter outside, it is no longer able to pull air in the manner described above.

Taken into consideration, the following are the two types of setups and the actions to take:

Step 1: Prepare the Carbon Filter

Take the filter out of the package and place the pre-filter onto it to complete the assembly. There should be elastic bands available for you to use in order to secure the positioning of the pre-filter. In many circumstances, gardeners choose to position the pre-filter in the same location as the inline fan intake port on their equipment. Think about what a pre-filter is supposed to perform, and you’ll see why this would make sense.

Step 2: Find The Suitable Place for The Filter

Remove the filter from its packaging and put the pre-filter onto it. In order to ensure the positioning of the pre-filter, there should be elastic bands available. Pre-filters and inline fan intake ports are frequently used together by growers to save space. Think about what a pre-filter is supposed to accomplish, and you’ll see what I mean.

Step 3: Cut Ducting at the Required Length

Given that you’ve placed the inline fan within the tent, you’ll need to connect it to the filter on the exterior of the structure. Measure the distance between the fan flange and the filter flange with precision. And then cut the ducting to the precise length you need it with a box cutter or wire cutter. With aduct flanging kit, you can be certain of accurate and leak-free functioning.

Step 4: Connect The Filter Flange with the Fan Flange

After that, connect the ducting to the fan’s tapered end and route it outside through a vent hole. Keep in mind that the vent hole and the inline fan should be on the same line. This will help to reduce the amount of airflow that is lost to the filter. To finish, use duct tape and duct clamps to secure the vent hole, the fan-ducting junction, and the filter-ducting joint together.

Setup Guide 2: Both Fan and Filter are Outside

Now, connect the ducting to the fan’s tapered end and route it outside via a vent hole in the ceiling. Make sure the vent opening and inline fan are on the same line as each other to avoid confusion. Thus, the amount of airflow that is lost to the filter will be reduced. To finish, use duct tape and duct clamps to secure the vent hole, the fan-ducting junction, and the filter-ducting joint.

Step 1: Place the Carbon Filter Ready

Remove the carbon filter from the previous setup and install it on the new location, just as you did in the first step. Make every effort to keep the filter as close to the tent as possible.

Step 2: Put the Fan on Top of the Filter

Because we’ll be keeping both the fan and the filter outside, we’ll need to make a fan-filter junction that’s both secure and airtight. Place the fan’s tapered end on top of the filter so that it is flush with the surface. Now, using 1-2 wraps of the aluminum foil duct tape, secure the junction.

It’s possible that you won’t receive the duct tape along with the fan-filter combo. As a result, ensure that you have one before beginning the process. Despite the fact that it is standard practice, be certain that the fan and filter sizes are the same.

Step 3: Cut the Vent Hole and Ducting

The fact that we’ll be installing our fans and filters outdoors necessitates the construction of an airtight and secure fan-filter connection. Place the fan’s tapered end on top of the filter so that it can’t be seen. After that, use 1-2 wraps of the aluminum foil duct tape to seal the connection in place. It is possible that you will not receive the duct tape with the fan-filter combination. As a result, make certain that you have one before beginning the process. Despite the fact that it is common knowledge, make certain that the fan and filter sizes are the same.

Step 4: Secure Connections

Duct foil tape and duct clamps should be used to secure all of the connections. The following connections should be located beneath the rudder: the vent-ducting junction, the ducting-fan joint, and the fan-filter joint. Problems-

  1. It is possible that the fan will not suck as much air from the outside as it might from the inside. When the fan is located outside, it will be incredibly difficult to reduce inline noise.

Consequences of Keeping The Filter Outside Tent

As we stated at the outset, placing the carbon filter outside is not a recommended mode of operation. It has a variety of disadvantages, especially if you’re concerned about carbon filter number one. At this stage, we’ll demonstrate the ramifications of your actions-

You’re Defeating The Purpose of the Pre-filter

The pre-purpose filter’s is to filter out large-sized dust and debris from the inside of the grow tent. Because you are preventing the filter from working, you are undermining its function. As a result, the dust and debris will be drawn straight into the fan’s airflow. This is a complete and utter no-no. Remedy: Place the pre-filter on the opening of the vent hole (in the case of a ‘fan-filter combo outside’), or on the opening of the inline fan (in the case of a ‘fan inside, filter outside’) to prevent the fan from turning on.

You Can Not Draw Air Through The Filter Anymore

Despite the claims of many manufacturers, carbon filters are not equally effective in drawing air in and out of a system from both directions. In this situation, we’re extending it outwards from the center. And this will result in a decrease in the effectiveness of the filter. Additionally, this inefficiency may have an impact on the predicted output from your growing space. Treatment:There is no effective treatment for this. You’re going to have to deal with the problem one way or another. However, placing an oscillating fan at the bottom of the structure may help to circulate the air and decrease the impact to some amount.

The Fan has to Work Harder

Irrespective of whether the fan is located inside or outside the tent, it must exert more effort in order to direct exhaust air into the filter. If there are a few of turns in the ducting, the job may become much more difficult. Solution: Purchase a fan that has at least 5-10 percent greater CFM than the one recommended by your grow system. Maintain the ducting’s length and straightness to the greatest extent practicable.

It Might Catch on A Fire

We can see from the preceding statement that the fan is subjected to a great amount of strain when the filter/fan-filter combination is located outside the building. An increase in pressure may induce overheating in the fan motor, which may result in a failure. In the worst-case scenario, it might even result in a fire. Solution:In this case, we strongly advise you to go for inline fans that are equipped with circuit breaker help.

If the fan experiences any further stress or heat build-up, it will immediately shut down and turn off. Here is the gadget that we recommend as a speed controller/circuit breaker combination:

Safety Concerns

Is it OK to place the carbon filter outside the tent? It’s possible that you’ve received the answer along with detailed instructions. The following are some safety recommendations that you should bear in mind:

  • Electric fans with circuit breakers should be used
  • Ducting should be kept short and straight
  • Install a pre-filter at each point where air will come into contact with the ducting to filter it. Utilise an air-conditioning fan that delivers 5-10 percent more CFM than the grow system requires. Make certain you utilize an electric inline fan that is equipped with a circuit breaker

Keep the ducting short and straight and use electric fans with circuit breakers. In order to filter the air before it enters the ducting, you can insert a pre-filter wherever. Utilise an air-conditioning fan that delivers 5-10 percent more CFM than the grow system requires; Always utilize an electric inline fan that is protected by a circuit breaker.

Leave a Comment

Your email address will not be published. Required fields are marked *