4X4 & 4X8 Yield expectations?
You are using an out of date browser. It is possible that this or other websites will not show correctly. You should either upgrade your browser or switch to another one. So I’m the type of person who asks a million questions, so I’m just going to throw them all out there in the hopes that someone can help me, some questions may benefit others, and so on, but I’ve never seen a question like this before, and most of us grow in these size tents or similar, so if the more experienced grower could tell you how much is ample and that could be a goal maybe, but for me, I just need to know that my setup will provide me with My original goal to finish this year was 100oz, but after doing the math, I realized that I actually needed around 130-150oz to last me from November this year until at least February 2020.
I already have 12.5oz vacuum sealed, and I have 8 plants flowering now that will be harvested in 3 weeks that will give me around 30-35oz, so I will have 17 plants to pretty much give me 100oz.
I’m running two tents with a total of 17 plants, one tent with 8 plants will be switched to 12/12 on the 20th, and another tent with 9 plants will be switched to 12/12 on the 27th.
So i’ve been training 8 plants for my 4×8 tent, 4 O.G.
- At this point, each main stem should be 1/4″ thick, so I’m assuming the thicker the stem, the larger the bud.
- Each main stem will have its own space around it to allow for a better environment.
- As a result, I require 50+oz from this tent, which would equate to 6.25oz per plant at a minimum.
- However, I am open to suggestions and would appreciate it if you could tell me what you think would work better.
- Is it possible for me to produce 30-35oz?
As a result of what you have just read, and because I will be posting pictures along the way, I keep my tents temperatures between 25 and 27 degrees Celsius, with the occasional rise or fall of a degree Celsius, excellent airflow throughout (air intakes are fed in through nearby windows and exhaust pipes go into another room to help with maintaining moderate temperatures), so here are the figures for what I have: a.
- I’ve calculated 45-50 percent for the 4×825 and 30 percent for the 4×4.
- If everyone agrees with my estimate, I will get 70-80oz from these two grows, bringing my total to 130oz, but if more people disagree, I will have to adjust my grow or add more plants in another tent, which I really do not want to do.
- Any suggestions, thoughts, or information would be greatly appreciated; however, as previously stated, I urgently want an answer so that I may at the very least set my mind at ease.
- I’m overwhelmed with information right now.
- I’ve completed two grows.
- One of them was broken by me).
- I’m not sure whether that is how people evaluate things.
We’ll see what happens.
Yea, I normally just run 4 plants for 4-6 weeks of veg for 20oz, but running 9 plants in three rows of three might be rather interesting, like a sea of green.
Now, I’m a complete novice when it comes to growing and have never grown in a tent or under a bulb with a power more than 60 watts.
But for the most part, it’s simply a question of putting yourself out there and seeing what happens.
For example, I had a few plants directly below the window that I moved outdoors and placed next to each other on the patio.
In addition to genetics, if they are healthy throughout the vegetative stage, they will be healthy during the flowering stage as long as they do not meet any difficulties with pests or feeding problems.
And I’m only interested in seeing if you achieve your objective!
There is nothing more frustrating than having pests in your garden grow.
I use Great White Mycrozyhms, Mother Pucka Mycrozyhms, House and Garden Root Accelerator, and Advanced Nutrients Voodoo Juice exclusively as root enhancers.
In floral week 12, how far away should my light source be? I’m just interested in 12 at the most “Everything else will be cut save for the colas.
Similar threads
Are you finished with your run yet? What exactly did you give up? Do a run, then work on refining and optimizing your rowing technique and space. Before I can run, I like to stroll around the block. I’ve found that attempting to estimate a yield can be discouraging. I’d rather hope for a p per light than be overjoyed if I receive more than that. Okay, let’s get to the heart of the matter: Yes, it is feasible to have 3+ with 2kw over 4×8. Various plant heights and plant numbers have been used in this process.
- Can be done using sog, or fewer bigger plants.
- It is only possible to compare (unless they are both using the same strain, in the same room, and under the same conditions).
- wattage and plant count are only two factors in this equation.
- Don’t forget that the environment is really essential.
- The rcdwc/aero/mbp system, which reduces veg time, is not recommended (unless you have one).
- In my experience, it takes at least three runs with the same strain before things get comfortable.
- So if you produce a number of lesser plants you may attempt to make up make up for the 3 feet in height.
This is an example of how I tested.
gpw = 2.2 lbs per 1000 pounds Test number two: 16 plants were allowed to veg for two weeks before being flipped at 16 “1.95 pounds per 1 kilocalorie Test number three: 36 plants with no vegetables.
were flipped instantly.
Each strain is unique in its own way.
Others do not appreciate being crammed into a small space.
Although it is unfair to compare blue dream to blue dram, I am confident that blue dram will produce more under perfect conditions.
Per 1000 watts of power in a 4’x4′ space (so double for 4×8) 7-9 bigger plants with a veg period of 3-4 weeks.
I’ve found that doing this puts you near to where you want to start, and then you can alter it as you go.
In this case, there is less concern about excessive plant numbers being present.
This is NOT a firm commitment. You must experiment with the amount of tension in your room to see what is most comfortable for you. It all depends on whether or not you are concerned about plant numbers. I hope this is of assistance, and best of luck.
How Many Plants Can I Fit in a X by X Grow Tent?
If you’ve been looking into this subject for a time, you’ve most likely come across 10 different solutions for each tent size you’re considering. There is a valid explanation for this. Cannabis plants can grow to be enormous in size, depending on the strain, the size of the pot, the growth method, and other factors. The good news is that you have complete control over all of this, and as a result, you have complete control over the growth of your plants. The primary technique by which you do this is through the developing approach you employ.
In case you’re unfamiliar with any of the methods covered, we’ll provide a brief overview of each one, along with the advantages and disadvantages of each one.
How Many Plants Can I Fit In A 2 x 2 Grow Tent?
In a 2 by 2 tent, the majority of individuals will grow a single plant. Use strategies like as low stress training andlollipopping or other sorts of trimming to ensure that your plant fills out the area with the greatest amount of colas possible in a 3 gallon or 5 gallon container. The Sea of Green technique (abbreviated SOG) is another option for growing a high number of tiny plants in a limited amount of space. You will be able to fit four, or possibly more, plants into this area if you do this.
While I understand that there are smaller grow tents available than a 2 by 2 foot space, this is the least size we want to explore for the sake of this article.
They are intended for specialized purposes like as sowing or cloning, with some of the somewhat bigger ones being intended for vegging.
How Many Plants Can You Fit In A 2 x 4 Grow Tent?
Considering that this tent is precisely twice the size of the previous one, you’re most likely imagining that you’ll be able to fit twice as many plants inside it, providing they’re all the same size. And you’re absolutely correct. Small plants may be accommodated in a 2 x 4 foot grow tent, and you can fit as many as eight of them in there. In a 2 by 4 foot space, you can obtain two plants if you let them grow to their “natural” size.
How Many Plants Fit In A 3 x 3 Grow Tent?
When you get to the 3 by 3 size, things start to become interesting. You find yourself with a plethora of possibilities. You could put four plants in this size tent, but you’d have to keep them on the tiny side in order to make them work. You could use the SOG approach to cram even more plants into the space available. You have the potential to grow nine or perhaps more. Alternatively, you may travel the opposite way. You could cultivate a single plant if you wanted to. It goes without saying that you must prevent it from growing too tall, as grow tents have a maximum height restriction.
To guarantee that the plant spreads broad and fills the tent with as many bud sites as possible without growing too tall, you would want to apply low stress training and/or other strategies.
How Many Plants Can I Fit In A 4 x 4 Grow Tent?
This is the most typical tent size for a home grow, probably because it is ideal for using a 1000 watt HID lamp or a similar LED grow light to illuminate the plant. It’s also small enough to fit comfortably in the majority of households. As with the 33%, there is a great deal of possibility for customization. With SOG, you may produce one enormous (meaning wide, but not extremely tall) plant, four “regular-sized” plants, or as many as 16 or more.
How Many Plants Can You Fit In A 5 x 5 Grow Tent?
For a 1000-watt equivalent grow light, a 55 grow tent is also an excellent choice. The finest LED fixtures have a five-by-five-foot footprint. In a 5 by 5 area, you can grow up to 25 plants using SOG techniques. If you like to let your plants develop to their full potential, one of these tents might accommodate four reasonably large marijuana plants. Some cultivate a single massive plant in a 55 container.
How Many Plants Fit In A 4 x 8 Grow Tent?
Because a 4 by 8 foot grow tent is precisely twice as large as a 4 by 4, you can fit twice as many plants inside as you can in a 4 by 4. The Spider Farmer 4000 has two 1000 watt equivalent lights, which allows you to effortlessly grow two giant plants, eight good-sized plants, or as many as 32 or more little plants in a sea of green growth.
How Many Plants Can I Fit In A 10 x 10 Grow Tent?
Last but not least, we have the enormous 10 by 10 foot tent. It has four times the floor space of a 5 by 5, which means you can grow four times the number of plants in it. You should, however, ensure that there is enough space in there for you to be able to access all of the plants comfortably. Keeping them smaller will allow you to do this. As a result, you can grow 100 or more little plants (though you may want to lower this number a little to allow yourself an aisle so that you can access to every plant), 25 good-sized pot plants, or four enormous cannabis plants.
What Size Plants Should You Grow?
The amount of marijuana plants that may be accommodated in any given tent size is totally dependent on the size of the plants. And that is something you can control. Many little plants are preferred by certain growers, whereas few huge plants are preferred by others. There are advantages and disadvantages to both growing methods, depending on your perspective. Let’s take a closer look at each of them.
Many Small Plants (Sea Of Green)
Using the Sea of Green technique, you may grow a large number of plants in a short amount of space, allowing you to accommodate more plants in your grow area. The effect appears like a sea of green. This is perhaps the easiest growing method and also the fastest, which is why it is highly popular. You begin blooming the plants as soon as possible in order to prevent them from growing into huge plants. As a result, each plant normally only has one bud location. As a result of the huge number of plants, you end up with nearly the same number of bud sites per area as you would have with a smaller number of bigger plants, each of which has several bud sites.
The buds, on the other hand, are much smaller than those on a bigger plant. However, because you go from vegetative to flowering so fast, it takes considerably less time to get from the beginning to the end of the harvest, allowing you to harvest more frequently if you grow all year.
Advantages
- More harvests each year are possible because of the shorter growing cycle. There is no (or very little) pruning or trimming required. Because it does not require much vertical space, it is cost effective. It does not need a lot of soil (or other media)
Disadvantages
- Colas are smaller than in other ways (but there are more harvests)
- Some countries set restrictions on the number of plants that can be lawfully grown
- Others do not. There are more plants to water and feed with nutrients.
One Huge Plant
The amount of time spent watering and feeding nutrients is reduced if you simply have a single plant to take care of. You will, however, have to put in a lot of stress training, pruning, and cutting to get the results you want. You’ll want to educate your plant to grow horizontally, rather than vertically, so that it spreads out more sideways than it does up. Allow it to grow vertically from there until it has spread out to the side sufficiently to fill the growing area available. As a consequence, you will have the greatest number of bud sites to fill your available space, which equals a larger yield.
- Depending on the size of the object, that is.
- You’ll want to trim and maybe lollipop your plant in order to guarantee that as many bud sites as possible are exposed to light and that the plant focuses all of its efforts to producing those bud sites and nothing else throughout the growing season.
- Once the branches begin to grow vertically, growers use a net or a trellis to hold them in place until they are ready to harvest.
- And growth beneath the net is eradicated, as it does not receive much light anyhow.
Advantages
- If the number of plants allowed is restricted by regulation, this is an excellent method of increasing yields. It takes far less work to water and feed a single plant. Larger buds, which are typically more powerful.
Disadvantages
- Because of the longer growing cycle, there are more harvests every year. Stress training, trimming, and pruning are all required. There is a greater requirement for vertical space, however this may be mitigated by utilizing a technology such as SCROG
- More soil or other material is required, as well as larger pots.
Several Medium to Large Plants
Finally, you have the option of growing to whatever size in between. There truly isn’t a limit to what can be done here. If you’re looking for an average-sized marijuana plant, you can expect it to grow to be about 4 square feet in size, which corresponds to an area of approximately 2 by 2 feet. Ideally, you’ll want to maintain these plants in a 3 or 5 gallon pot and train them to a certain degree. A SCROG grow is a good choice for plants of this size since it maximizes production. Several times over-top the plants to increase the amount of colas while keeping the overall height under control.
At the end of the day, any one of these strategies can be effective, and the choice ultimately comes down to personal preference.
Other Things to Consider
In addition to what we’ve already discussed, make sure you have enough space in the tent to be able to access to every plant and water it or provide whatever other care may be required. When working in bigger tents, this is especially crucial because plants at the back may be difficult to reach. You’ll also want to make sure there’s adequate room for any equipment you might require. This might include grow lights, filters, fans, humidifiers to enhance relative humidity, dehumidifiers to decrease relative humidity, air conditioning or heating, among other things.
Just make sure that there is enough space in the tent for everything you need to bring with you.
This term refers to the sucking inward of the tent walls as a result of the negative pressure created by your ventilation system within the tent.
Keep in mind that tent suck should be taken into consideration while determining how many plants to place in the tent.
As an alternative, you may take steps to prevent tent suck, such as installing support beams to keep the canvas walls in place and prevent them from sucking inward. Alternatively, you might utilize an intake fan to counteract the force of the exhaust fan.
How Many Plants In A Grow Tent: Final Thoughts
The most important message from this is that it is difficult to provide a response to the issue of how many plants can be accommodated in a certain size grow tent. You would need to know the size of the plants before you could proceed. And that is something over which you, as a farmer, have complete command and responsibility. As a result, the first decision you will need to make will be how big you want your plants to grow. That information will allow you to determine how many of them you can put into your grow tent, or how large of a grow tent you will need to be capable of growing any number of plants in one area of your garden.
“
What is the Max Yield of a 4X4 Grow Tent? Here’s the Answer!
Cannabis has risen to become one of the fastest-growing sectors in North America as a result of its expanded legalization for recreational use in Canada and at the state level in the United States, according to industry analysts. You could be thinking of producing cannabis, or you might be wondering how much cannabis you can produce in a little amount of area. The greatest yield of a 4X4 grow tent is roughly 6 medium-large cannabis plants per three months. The answer is dependent on your growing strategy, as well as the varied types and grade of equipment that you employ in your operation.
The yield of your tent will be determined by the type of cannabis you choose to cultivate as well as the growth strategy you choose.
Continue reading to learn how to get the most out of your grow tent’s produce.
Tips for Increasing Grow Tent Yields
However, if you want to get the most out of your cannabis plants and increase their yields, you’ll want to follow a few easy guidelines and employ some advanced approaches. As a result of your hard work, you’ll be able to relax knowing that you made the most of your time and effort. Remember that optimizing the yield of a given place requires time and effort to master!
Lighting Keeps Your Plants Healthy
When using a grow tent, the first thing you’ll need to think about is how to keep the proper levels of illumination in the tent. When it comes to lighting, a decent rule of thumb is to utilize at least 33 watts per square foot. As a result, for a 16-square-foot grow tent, aim for around 600 watts of power. If you follow these instructions, your plants will develop in a beautiful and healthy manner.
Maintain the Correct Distance for Lights
It is necessary to set lights at a specific distance from the plant, depending on the wattage of the lights. In the case of a 600-watt bulb, it should be set around 50-60 cm away. As the plant develops, you’ll need to adjust the height of the light in order to keep the desired spacing between the two.
Keep Your Plants on a Cycle of Light and Darkness
During the first two weeks of growth, your plant will require a continuous cycle of 18 hours of light and 6 hours of darkness. After that, your plant will require a 24-hour cycle of light and darkness. Consider acquiring a timer for your lights so that you do not have to manually turn them on and off every time you leave the house. Nonetheless, as your plant reaches the flowering stage, it will require a change in its daily cycle of light and shade.
It is preferable to divide the day and night evenly, so that there are exactly 12 hours of light and 12 hours of darkness each day. Once again, a timer is beneficial in this situation in case the switch is activated when you are not there to adjust the light.
Ventilation Allows Plants to Breathe
Fans are also a crucial feature of a grow tent. They contribute to the correct amounts of fresh oxygenated air and humidity in the environment. If you want to optimize your yield, you must modify the ventilation to match the plant’s life cycle, just like you would with the lighting system. Listed below is a simple set of guidelines to follow:
- When the light is turned on, leave the fan running continually. In order to avoid the tent being hot, this should be done. During the hours when the lights are off, turn on the fan for 15 minutes every hour
- When your plant is nearing harvesting time, extend the fan’s operating time to 15 minutes every half hour in the final weeks before harvesting. Keep the fan running continually to keep the humidity levels at 89 percent or below.
Keep Pests Away From Your Plants
Nothing is more frustrating than having all of your hard work in the garden undone by an insect that kills or damages your plant. To maintain your plants free of algae and germs that might sabotage their growth, use a mild hydrogen peroxide solution. As a prophylactic step, 15 milliliters of a 3 percent hydrogen peroxide solution per gallon of water is recommended.
Pay Close Attention to Your Plant
There is no alternative for being conscientious and keeping a clean and orderly grow facility. In order to stay on top of all of the moving parts and pieces involved in cannabis cultivation, it is critical to stay on top of each of the plant’s requirements and to not procrastinate when new issues arise. One of the most common reasons that grow tents fail to generate optimal yields is because they are neglected or cared for improperly.
Organic Methods are a Win-Win
If you’re shopping for food, organic is not only healthier for you and the environment, but it also typically tastes better. The same may be said about cannabis. Grow your plant organically, avoiding the use of any of the following: There are numerous advantages to doing so. First and foremost, when it comes time to consume your cannabis, you will most likely see a rise in yields as well as higher-quality outcomes. You will also save money during the growing process while allowing your plants to develop in their natural environment, as they were designed to do so.
Consider Growing Vertically to Increase Yields
Another growing strategy you may want to explore to enhance the output from your cannabis plant is growing vertically. This enables you to make use of all three dimensions of your available space in your home. This includes the following: Traditional two-dimensional growth patterns provide less yield than three-dimensional growing patterns. In other words, vertically growing simply piles plants on top of one other in addition to spreading them across a flat area. This has the ability to more than double or treble your yield in the same amount of area!
It necessitates the acquisition of extra equipment, lighting, and ventilation.
If money is a concern, try constructing a vertical grow tent using a do-it-yourself approach.
Some Strains Grow Better Than Others
Not all cannabis strains are made equal, and this is especially true for medical marijuana. Some cultivars are well-known for their ability to develop fast and provide extremely dense yields. As a result, they can produce a large amount of cannabis in a small amount of space.
Others, on the other hand, are less effective. It is possible that trial and error will be the most effective method of determining which breeds provide the maximum yields. Stay with a strain after you’ve discovered one that performs well in your environment.
Consider Opting for High-Quality Equipment
If money is not an issue in your developing enterprise, you might want to consider investing in some high-end versions of the equipment described above, such as the following: It is true that you get what you pay for, as the old adage goes. If you choose low-cost equipment, you may find that your yields are reduced. Consider what would happen if that low-cost fan shorted out or if your plant’s lights went out and damaged it. Not only would you have to replace the item, but you’d also be starting from the beginning with your plant.
Consequently, the higher cost of the item would be well worth it in the long run in this situation.
Lighting, ventilation, and cleanliness are all important aspects to consider.
This degree of development, however, demands a great deal of patience and commitment.
New Grower – 4×8 Grow Tent
- Date of joining:June 23, 2011 Received:12 Likes on 183 messages. I have a 4×8 grow tent with the whole canna range for soil growing (400WATT MH light for veg, 600WATT MH light for flowering, and WATT HPS light for harvesting). I’m raising two THC Snow plants and two NYC Diesel plants. Is there anything specific I should be on the lookout for when growing in a grow tent? Is the number of lights that I have sufficient? How many plants could I grow in a 4×8 tent with a 600Watt generator? Date of joining:October 20, 2011 The number of messages is 343 and the number of likes received is 54. Not sure how to answer what to look out for, however there are hundreds of things listed below that you will notice if anything isn’t quite right. As for the number of plants, I wouldn’t put more than 11 in a 600-square-foot space.
MaineCronicMedical Marijuana PatientGold Member
- June 23, 2011 – Become a member! Received:12 Likes on 183 Messages. 4×8 grow tent with the whole canna range for soil growing (400WATT MH light for vegetative growth, 600WATT MH light for blooming, and WATT HPS light for harvesting) /p I have two THC Snow plants and two NYC Diesel plants in my growing space at the moment. Is there anything specific I should be on the lookout for when growing in a tent? Is the number of lights that I have sufficient for the situation? Approximately how many plants could I grow in a 4×8 tent with a 600Watt generator? 20th of October, 2011 – I’ve joined! The number of messages is 343 and the number of likes is 54. You will recognize when something isn’t quite right if you pay attention to the items listed below. Not sure how to answer what to look out for? If you’re wondering how many plants to put in a 600-square-foot space, I wouldn’t suggest more than 11.
MarquisGeminiWell-Known Member
- Date of joining:June 23, 2011 Messages:183 Likes Received:12 Oh, that’s helpful to know. The seedlings are now illuminated by simply TWO 130WATT vegetable CFLs. Whenever they begin to produce genuine leaves, I’ll turn on the MH light (hopefully by the end of the week). I have four plants right now, and I may plant two more today. Because I’m using LST, I was thinking about 4-8 plants, but now I’m thinking about 4. I intend on pruning the most of the branches before veg so that I have approximately 4-8 main colars on each plant when it is ready. This is what I’m calling a tribute to an old buddy. Following his approach to the letter
- The width of the plants varies according on the strain and technique used, but you can easily fit 12 5g buckets into the 24 sq ft of floor area in the 4 x 8 tent
Hunswayne1Well-Known Member
- On August 8, 2015, I became a member. Messages:64 Likes Received:52 Do you think you’d like six plants in a 4×8 with two 1000w high-pressure sodium bulbs?
Old School
- Date of joining: January 31, 2013 Messages:16,502Likes In a 4’x8′ space, 13,867,600 watts is nothing near enough power to be effective. In my 4’x3′ tent, I have a 600w incandescent bulb as well as a 300w LED. In that large tent, you’d need at the very least two 600-watt lights, and two 1000-watt lights would be excellent for the job. Another alternative would be to divide the tent into two 4’x4′ sections, one for each side of the tent. One is equipped with a 400w MH for veg and another with a 600w HPS for blooming. You could fit as many plants as you wanted in there. If you have a small number of plants, caring for them will be easy
- But, the longer it will take for the area to fill in will be more difficult. As long as the area is sufficiently occupied, the yield will be consistent from year to year. In my 4’x3′ tent, I have grown a single plant ScrOG many times, and I recently finished cultivating 24 tiny plants in that same space. Both approaches are equally effective. There is no “best” number
- Rather, it is a matter of personal opinion.
4×8 Scrog Tent
This is page 1 of 1112345611Next
- Date of joining: September 26, 2011 Messages:968 Likes Received:205 The situation is as follows: I’ve already planned out my setup. I’d want to purchase a 4×8 tent. Two 1000 watt mh/hps fixtures were installed. Three exhaust fans (one for the carbon filter, one for the light, and one for the intake) for a 6-inch duct. Thinking about utilizing 5 gallon air pots (does it really need to be that big?) for this project. Nutrients from the Flora Series (thinking of going organic). Fox Farms soil with a little extra perlite added for good measure. How many scrog plants do I need to fill that screen with a month of growing time for each? That is my primary query. My objective is to lose 2 pounds each 4×4 square foot of space. I believe that is the ultimate goal for all farmers. I’m just having difficulties choosing the amount of plants I need in there without over crowding. According to my study, the number 12 is the one I’m looking for, but I wanted to hear from other growers who have either done this before or are considering doing so. Alternatively, you may have plans as well but haven’t thought them out yet. Critical Kush seeds are the ones I intend to utilize. It is an indica variety that is said to provide a good amount of yield. This takes me to another point, which is the following. Is it preferable to smoke Indica or Sativa for a quick scrog? Temperatures and humidity are difficult to predict at this point, but they should be within safe ranges. I was thinking about switching to hydroponics, but I’ve found that the buds don’t taste, smell, or look as appealing as soil. This is only my own view. I believe hydroponics may provide fantastic results, but I am not confidence in my ability to resolve issues that arise so rapidly while utilizing this technology. Thank you to everyone who has taken the time to read this, as well as to everyone who has responded and attempted to assist me in my goal. Here are a handful of photos from a scrog I assisted with a couple of years ago, just to give you something to look at lol. We designed and created the box specifically for you. Still own it
- Joined:Sep 26, 2011Messages:968Likes Received:205Signed up:Sep 26, 2011 Come on, I’m sure there are some 2000 watt grows in here somewhere. In fact, everybody who is growing in any way is welcome. I’m curious as to what you utilized and what you grabbed out of the drawer. Someone has to know what I may anticipate from this and how to fill it
- Joined:Sep 26, 2011Messages:968Likes Received:205Signed up:Sep 26, 2011 This is a tragedy. Let’s get this party started, folks. Registered on September 26, 2011Messages: 968Likes Received: 205
Buffalo11024Not just a thumb, but a whole green hand.
- Date of joining:July 25, 2012 Messages:1,829 Likes Received:692 Depending on the strains, I can get anywhere from 1.5 to 2 pounds out of a 4×8. There are eight plants. With only 1000 watts. Single 1000w in 4×4 was pulling 14-18 oz
dukedogg76Well-Known Member
- Initiated on:Mar 24, 2012Messages:228Likes received on:Mar 24, 2012 I’d put 8 plants in that area, but if you’re really vegging those babies, you could put one under each light and scrog the living daylights out of them if you wanted to. Sativa dominant hybrids seem to fill the screens better, but if you’re just growing four plants per 4×4 space, it won’t make a difference. You have to grow your own marijuana, you know? Smart pots are something I despise. I haven’t noticed any significant differences between them and normal nursery pots, other than the fact that smart pots are more difficult to move about. I would not use three 6 inch fans at the same time. I don’t believe you require an intake system
- Passive air should suffice. Perhaps a nice 8-inch fan would suffice to cool the lights and clean the air, and you might save money by purchasing only one fan. If you’re attempting to create living soil, I recommend utilizing pots that are at least 5 gallons in size. Containers of 7.5 and 10 gallon capacity may even be preferable. Because, after all, more roots equals more fruits. Another advantage of increased size is that it allows your microorganisms to travel from Reno, Nevada to New York City more quickly. They actually do well in larger containers. To finish, make certain that you’re allowing yourself enough time to relax. While I have no idea what it takes for others, it takes me around 6 weeks from the day I put seeds into water till the plants are about 18 inches tall and ready to blossom. Simply plan ahead and provide yourself enough time to say, “well, I believe I’ll need another week of veg before I flip them,” if the need arises. Wishing you the best of luck. Grasscity Forum was used to send this message from my iPhone. Joined:Sep 26, 2011Messages:968Likes Received:205Signed up:Sep 26, 2011 The greater the number of plants I have, the shorter the time period. And there is no question that I will scrog. Furthermore, 2 pounds from 1 1000 watt sounds fantastic. I should put two of them in there and absolutely fill the full screen with them. I’m just curious as to how many people it will take to reach the 4 pound milestone in 5 months. Date of joining: September 26, 2011 Messages:968 Likes Received:205 Are you growing them in a scrog or are you growing them straight up?
Buffalo11024Not just a thumb, but a whole green hand.
- Date of joining:July 25, 2012 Messages:1,829Likes Received:692 I only screen when I know the stems will not be able to sustain the bud on their own. Date of joining: September 26, 2011 Messages:968Likes 205Ah, I understand what you mean. So it’s only for moral support. Hell yeah, with the 2000 watts, I’m going for a 4 out of 5. Realistically, it’s a 3, but we’re aiming for 4. In addition, the exhaust fans will only be activated when the lights are turned on. I believe it will be quite beneficial in maintaining the proper temperature in the house.
Buffalo11024Not just a thumb, but a whole green hand.
- Date of joining:July 25, 2012 Messages:1,829Likes Received:692 During the night, plants will still require air cycling. Date of joining: September 26, 2011 Messages:968Likes Received:205 No problem, however my goal for that is to just have the air from the home ventilate it during non-working hours. Just keep my usual fans blowing and the air moving
- That should suffice.
Buffalo11024Not just a thumb, but a whole green hand.
- Date of joining:July 25, 2012 Messages:1,829 Likes Received:692 Tents are quite effective at retaining moisture. That is the crux of the matter. Do you have a CO2 setup? If you don’t, your plants will effectively be choked to death. Color is enhanced by cooler evenings with temperature variations of roughly 15 degrees Fahrenheit. 6 a b c d e “Fans will have a difficult time keeping your lights on and the temperature under control. I would recommend upgrading to an 8-inch screen “in addition to this, if you have any questions, please don’t hesitate to contact me at [email protected]
Buffalo11024Not just a thumb, but a whole green hand.
- Date of joining:July 25, 2012 Messages:1,829 Likes Received:692 I discovered that I was being charged for cooling as well as for running the additional bulb. The means are not justified by the goals. Why I use a 1000w bulb in a raptor-style hood is a mystery to me. A more realistic weight for the space with a significant strain is 3 lbs.
Buffalo11024Not just a thumb, but a whole green hand.
- Date of joining:July 25, 2012 There have been 1,829 messages sent, with 692 likes. My next run will consist of a three-strain. A 3 week, perennial, sog with 45 plants in a 4 × 8 tent was used for this experiment. I’m trying to see if I can get my numbers to be under 1000 watts. Registered:Sep 26, 2011Messages: 968Likes: Received:205 The fans that I chose are available in a three-pack. That’s pretty much exactly what I’m looking for. And each one has a flow rate of 500 cfm. That’s a fairly good result. Because the lights I’m getting only have 6 inch connectors, the only thing I’d need an 8 inch connector for would be either the carbon filter or the intake system. And I can’t make any predictions about humidity or temperatures until I get my hands on the necessary equipment and see what it will perform in the real world. In addition, when the lights are turned out, I will not seal the tent. I’d keep it open to allow for the most air circulation possible. If that’s a concern, I’m not opposed to keeping them going around the clock, but I’d prefer to save a few dollars if I can avoid spending them. And my objective is to get three or more every cycle. In addition, I will not be operating co2. What is the benefit of the extra 2 inches provided by a fan
- Joined:Sep 26, 2011Messages:968Likes Received:205Signed up:Sep 26, 2011 Would it be more advantageous, though, to purchase two 8-inch exhausts? Intake and carbon filter air is pulled into the engine compartment from the outside of the room by two fans. To do this, I would need to purchase 8 inch to 6 inch connections. Is it possible that this might have an impact on air movement in any way? 500 cfm is, as far as I’m aware, a respectable flow rate. However, I will only have one intake and two exhaust ports, which may result in negative pressure. Date of joining: September 26, 2011 Messages:968Likes Received:205 Overall, I suppose the most important question is how to properly ventilate my tent. I’ll be pulling air from beneath the house and exhausting it into another chamber, which will be my final destination. I’d like to see a carbon filter installed in there. And that’s pretty much it in terms of content. To properly vent the tent, I need to know how many fans I’ll need and what large they’ll be. Take into mind that my lights would have 6 inch fittings for ductwork.
Buffalo11024Not just a thumb, but a whole green hand.
- 25th of July, 2012 (joined) 792 likes on a total of 1,829 messages. My next run will be a three-strain effort. Sog with 45 plants in a 4 by 8 tent for three weeks, on a continual basis. To test if I can get my numbers to be under 1000 watts, I’m going to try to increase them. Registered:Sep 26, 2011Messages: 968Likes: 0 Received:205 The fans I chose, on the other hand, are sold in sets of three. That’s exactly what I’m looking for. Moreover, each one has a flow rate of 500 cubic feet per minute. That’s a reasonable result. Due to the fact that the lights I’m ordering only have 6 inch connectors, the only thing I’d need an 8 inch connector for would be either a carbon filter or an intake system. And I can’t make any predictions about humidity or temperatures until I get my hands on the necessary equipment and see what it does. I also won’t shut up the tent after the lights are turned out. To ensure maximum air circulation, I’d recommend leaving the door open. If that’s a concern, I’m not opposed to keeping them going around the clock, but I’d prefer to save a few dollars if at all possible. Furthermore, my objective is three or more every cycle of training and competition. In addition, I will not be using co2 in my training. What is the benefit of the additional 2 inches provided by a fan
- Registered on September 26, 2011Messages: 968Likes Received: 205 Joined: September 26, 2011Messages: 968 Alternatively, would two 8-inch exhausts be more advantageous? Intake and carbon filter air is drawn into the engine compartment from the outside of the vehicle. Getting 8 inch to 6 inch connections would be necessary if I went this route. Is it possible that this might have an impact on airflow? In my experience, 500 cfm is a respectable flow rate. The only difference is that I’ll only have one intake and two exhaust, which might result in negative pressure. The date of joining was September 26, 2011. Messages:968Likes Received:205 I suppose the most important concern is how I will properly ventilate my tent in the long run. Using a vacuum, I will pull air from beneath the home and exhaust it into another area. That carbon filter is something I’d want to see on that thing! In a nutshell, that’s it! In order to adequately ventilate the tent, how many fans and what size do I require? Taking into mind that my lights would have 6 inch duct fittings
This is page 1 of 1112345611Next
How to Control Humidity in Your Grow Tent (4 Easy Ways) – Easy Guide
The most recent revision was made on February 2, 2022. It is completely normal to use a grow tent to house a cannabis plant that is in the process of growing. The process of setting up a complete room such that it is suited for plants might be time-consuming and not really worth it for a tiny grow-op. However, due to the fact that a grow tent is a much more contained environment than an open space, there may be a few concerns that arise. The most pressing of them is the dilemma of how to regulate humidity in a grow tent.
If this is left unchecked, it might result in growth problems or molds that can destroy the plants.
How to Control Humidity in a Grow Tent
February 2, 2022 is the most recent revision. An entirely plausible notion is to use a grow tent to provide shelter for an expanding cannabis plant. The process of setting up a complete room so that it is ideal for plants might be time-consuming and not really worth it for a tiny grow operation. However, due to the fact that a grow tent is a lot more contained environment than an open space, there may be a few problems that arise. How to maintain humidity in a grow tent is the most pressing of these concerns.
This might result in growth problems or molds destroying the plants if left unchecked. In order to properly acclimate a cannabis grow tent, there are several aspects to keep in mind. Continue reading to learn how to reduce the humidity in a grow tent, boost it, and regulate it all at the same time!
2. Ventilation
Once the fundamentals of air circulation have been established, the following stage is to determine how excessively humid air may be expelled from the grow tent. Fortunately, there are a plethora ofexhaust systems available that are specifically designed for this function. These function by removing stale, humid air from the grow tent through an exhaust vent and introducing fresh air into the tent through an intake vent, which should be located at the bottom of the tent. As the exhaust fan exhausts the air from the tent, fresh air is drawn in through an open intake port in the structure.
Many versions of exhaust fans may be programmed to only turn on when the humidity reaches a specified level, or to turn on and off on a simple timer.
The use of this method also aids in temperature regulation, while alternate methods may be required in especially warm or cold tents.
3. Air Conditioning
Because of the nature of the lighting system utilized in the grow tent, things can become really hot within it very rapidly. When specific conditions are met, the space becomes essentially a mini sauna. Portable air conditioners are the most effective alternative in this situation, albeit the size required may vary significantly depending on the size of the grow tent. A properly sized air conditioning unit will not only cope with high temperatures, but it will also assist in extracting a significant amount of water from the air.
It is one of the most effective techniques to increase yields is to keep their environment somewhat temperate (in the 70°F to 80°F range) and consistent.
4. Dehumidifiers
In most small to medium-sized grows, air conditioning, air circulation, and a good exhaust system should be sufficient to keep the humidity in a growtent within tolerable ranges. However, this is not always the case, particularly when anything goes wrong. Individually owned humidifiers will not suffice in this situation. They become overflowing much too soon, and they are just not designed to manage the large volumes of water that your cannabis plants produce. The possibility of purchasing an industrial-scale dehumidifier is likewise not a viable option for most farmers, mostly because to the high cost.
This, on the other hand, is not a really bright concept.
Most portable dehumidifiers, depending on the size of the tent, will perform well as long as they are utilized in conjunction with other instruments.
- Read more:Top Picks for the 5 Best Dehumidifiers for Grow Tents in 2021 – Reviews
A Message on Insulation
No one of the humidity-control measures discussed above will be effective unless the tent is adequately insulated. When installing modifications such as exhausts or intakes, care should be given to verify that any holes are the right size for the tubing that will be utilized in the installation. A leaking grow tent may and will cause problems with humidity levels in the environment.
Aside from the occasional gaping hole in the side of the tent, a well-constructed grow tent should have little issue allowing your tools to do the tasks for which they were intended. Credit for the featured image goes to JRByron of Pixabay.
r/microgrowery – Number of plants that could fit comfortably in an 8×4 flower tent, and 4×4 veg tent?
An 8×4 flower tent with a 4×4 vegetable tent for clones and seedlings is my goal, and I want to cultivate as many plants as I possibly can (while keeping them healthy). As a result, the flower tent will be 32 square feet in size, while the vegetable tent will be 16 square feet. Do you know how many plants typically fit into a square foot of space or if you’ve had any experience with tents of this size before? I’m having a difficult time locating any reliable information on this subject. Thanks!
- level 118 plants blossoming in an 8’x4′ container?
- a second-grade education That’s exactly what I was considering.
- The established standard is 8 plants in a 4×8 container.
- I’m not convinced by what you’re saying.
- Visualization: 2 The fact that individuals on this thread are disagreeing, and it appears that many people prefer to disagree, is one of the reasons why I’m having trouble finding information I can trust.
- You could plant four 8-inch clones per square foot and harvest incredible harvests with only a few hours of training and trimming.
- And no, I don’t mean that I’m restricted by anything other than space and light, which has already been defined.
1st grade Numerical calculations should not be a source of anxiety for you.
Think about it for a minute.
I’m dealing with the polar opposite situation.
My primary focus is maintaining a modest quantity of real plants.
I’m perplexed as to why they have a restriction on it.
But at the very least, it is legal for you to do so, hehe.
1st grade How long you veg them for and how you train them are going to be important factors.
If you want huge, robust plants, only do 6-8 plants and let them 30 to 45 days of vegetative growth.
Ultimately, you will have significantly larger yields since you will be increasing each plant’s productivity in the mid and lower parts by not crowding it with plants and cutting off most of its natural light.
Would you be putting the plants in larger pots in order to achieve the scenario of fewer plants/higher yield?
Allow them to have enough space to live, develop, and breathe.
In my grow tent, I have 46 plants that are all close to 3 feet tall.
I’ve turned it on its side so that it is 5 feet tall and 9 feet wide.
You should be able to put a cloner, mother, and more than enough clones to supply the bloom tent in the vegetable tent if you store clones in 1’s or even solo cups in the vegetable tent.
And I was seriously considering utilizing solo cups in my vegetable preparation.
1st grade I used to operate identical tents and discovered that you can fit 15 plants easily in the smaller tent (which would be 16 if not for the fan) and 30 plants comfortably in the bigger tent (which would be 32 if not for the fan).
You can make the numbers much higher if you really want to, but that’s what worked for me at the time, and I thought it was a little excessive at the time, but it worked.
a second-grade education The number you mention is 30, one man says 18, and another one says 8. We’re talking about drastically different figures, yet you all have up votes. Sigh.
Maximizing the Placement of Your Grow Tent Equipment
Over the years, the use of grow tents for indoor gardening has become increasingly popular among small-scale and amateur gardeners. Growing plants in grow tents is popular among indoor horticulturists since they are simple to put up, need few resources, and have a minimal influence on the surrounding living environment. However, while cultivating in grow tents, cultivators give up some of the freedom that they would otherwise have when working in a conventionally constructed growroom. This is mostly due to the fact that the size of a grow tent often corresponds to the size of a garden canopy per 1,000W—as demonstrated by a 4×4-foot grow tent.
There is also minimal room for working within the provided grow space.
Regardless of the geographical and material limits imposed by grow tents, resourceful indoor gardeners may devise strategies for positioning their equipment in a way that is both convenient and effective.
After taking all of this into consideration, here are a few pointers for the many amateur gardeners out there who are setting up equipment in a grow tent.
Exhaust and Carbon Filters
The exhaust and carbon filter system in a grow tent is one of the most important pieces of equipment, as well as one of the most complex to install. It’s a good idea for hobbyist gardeners who use a 4×4-foot or 4×8-foot tent for blooming to combine an exhaust system with a carbon filter, air-cooled hoods, and an inline fan in order to save money on equipment. The combination of all of these features will assist in alleviating the spatial restrictions that are prevalent in grow tent farming. The same materials used for lighting may be used to hang carbon filters to the interior of a grow tent frame in the same manner as they used for lighting in the aforementioned sizes.
- In addition, because heat rises, it is usually best to hang the carbon filter as close to the tent ceiling as possible to avoid overheating the filter.
- It is recommended that the inline fan for the exhaust system be suspended from the ceiling support of the inside tent frame while also being placed near to one of the exhaust openings on the wall while installing the fan.
- (See also: 5 Tips for Keeping Odors Under Control in a Growroom.) The inline fan can also be hung on the tent frame using devices such as wire, rope, or retractable cordage.
- As seen in this diagram, the inline fan draws in the fragrant, hot ambient air from the tent canopy area while simultaneously chilling the hoods, and then exhausts both to the outside of the grow tent canopy.
- It is probable that exhausting a grow tent directly into a home will be a welcome source of heat throughout the colder autumn, winter, and spring months in most parts of North America.
- However, grow tent gardeners might choose to situate their setups near a window in order to exhaust the hot air directly out of the living room where they are being used.
- In order to resolve this dilemma, one may install a house air conditioning system to counterbalance the additional heat generated by the grow tent’s exhaust, but this can be extremely expensive during the summer months.
Small clip-on fans may be connected to the frame of the grow tent to provide ventilation.
Wall Fans
Optimum ventilation and circulation, as observed in standard indoor growroom operations, are critical to the survival of a tent-grown crop, as is proper lighting. Canvas tent walls, on the other hand, do not provide the infrastructure for hanging wall fans on a wall in a retrofitted wood-framed room, whereas wood-framed rooms do. Alternatively, smaller clip-on fans that can be easily added to the tent structure can be purchased separately. Second, simple free-standing circulating fans may be utilized in grow tents instead of having to deal with the inconvenience of trying to mount them to a wall or ceiling (if the square footage of the operation allows for this option).
Lighting
As has been demonstrated in traditional growroom setups, lighting is an excellent location to begin arranging the interior layout of a grow tent. This is due to the fact that the type of lighting used for an indoor garden has a direct impact on the alternatives available for air-cooling and draining the space. For example, the usage of double-endedhigh pressure sodium (HPS) lightsis prohibited in most grow tent cultivation circumstances since these lights send out an extraordinary amount of heat and they don’t come with air-cooling alternatives (apart from certain fairly new, somewhat untested versions) (aside from some brand new, relatively untested models).
The fact is that grow tent lights like fluorescent, LED, and air-cooled high-pressure sodium (HPS) lights may be easily suspended from the roof or internal frame of the grow tent using ropes, chains, or retractable cordage devices.
AC Infinity is the most recognized name in air delivery systems, having designed and developed the most cutting-edge breakthroughs in cooling and ventilation technology throughout the years.
For additional information, please see www.acinfinity.com or contact us.
