Where To Buy Shock Cord For Tent Poles

Amazon.com : Stansport 748 Stansport Shock Cord Repiar Kit for Tent Poles : Tent Accessories : Sports & Outdoors

Check out our comprehensive beginner’s guide to backpacking for much more information on how to organize a hiking trip. In addition, we have information on how to go hiking in the coldest months of the year, how to go backpacking with a dog, and the finest backpacking foods. Remember to keep in touch with us if you have any more questions in the comments section below. Congratulations on your travels!

Reviews with images

The product was reviewed in the United States on April 4, 2019 and it was verified as a purchase. When I discovered that my Marmot tent poles were protected by their lifetime guarantee, I made the decision to restring them. However, I had to pay for shipping, which might take up to 4 weeks, so I opted to restring them myself. This cordage is a little thinner than the cordage that came with my poles, but because my poles are of a fairly big diameter, I had no trouble retreading them with no problems.

To connect the cables, I was able to remove the metal end cap on one end of each pole and cut it off.

  1. Afterwards, I just pulled the old one out of the other end, which caused the new one to snap into place.
  2. You want it to be elastic, but not overstretched, so don’t overstretch it.
  3. I accomplish this by hanging them from hooks in the ceiling of my basement, where they are out of the way and out of the way of the children.
  4. On August 6, 2017, a review was conducted in the United States.
  5. Tip.
  6. I simply superglued the end of the new dead cord to the end of the old dead cord and then pulled the new cord in while simultaneously pulling the old line out.
  7. Purchase that has been verified A $45 fee would be charged by the manufacturer of my tent (which is well-known for its replacement guarantee) to replace my shock cables, with an 8-week turnaround timeframe.

I was able to fix all four poles in approximately 20 minutes, and they are as good as new after that.

I only had approximately 12 inches of material left over at the end of the project, so if you have a larger tent, consider purchasing two (mine is a 4-man).

The package promises to allow for re-stringing, which it did with the additional 10 feet of shock cord that was left over.

Fortunately, after a little bit of effort, I discovered a technique that made re-stringing a quick and painless process.

I ended up paying less than $8 on the kit rather than $90 for three poles.

The scenario including a guidewire and tape will not work.

On June 18, 2017, a review was conducted in the United States.

This was quite simple!

Due to the fact that I didn’t understand they weren’t all standard, mine were a tight fit!

I wish I had taken the initiative sooner!

Purchase that has been verified The process of replacing the rope in our tent was a lot less difficult than I anticipated.

On January 16, 2021, a review will be conducted in the United States.

Purchase that has been verified In the absence of directions, this was quite tough to use (I couldn’t figure out how to use the circular metal wire thing, and a quick google search yielded no results), so it may be perplexing if you haven’t done something like this before.

Top reviews from other countries

5.0 stars out of 5 for this product Amazing! On May 5, 2019, a reviewer in Canada commented on the verified purchase. Simple to use and excellent in its performance, I want to purchase more to keep with my camping goods. 5.0 stars out of 5 for this product It is simple to complete On the 4th of September, 2019, the review was conducted in Canada. Purchase that has been verified Easy to use, the cable is thicker than the chord that was on my damaged tent pole, but it still fit and was simple to repair when it broke.

  • a rating of 2.0 out of 5 stars Incompleto:( On March 19, 2020, a review was conducted in Mexico.
  • 5.0 stars out of 5 for this product Want to get a lot of cable at a low price?
  • I purchased two packets and have enough to complete all of my poles almost three times!
  • 5.0 stars out of 5 for this product It is simple to use.

Shock Cord Replacement Kit

What does it mean to be “waterproof” in a tent, and what does the “mm” rating on a tent indicate? Waterproof refers to the fact that all exterior fabric has been treated with our superior polyurethane coatings and that the seams are watertight right out of the bag in the case of an MSR tent. In this case, “mm” refers to millimeters and is used in conjunction with a number to signify an internationally recognized standard measurement of how waterproof a coating is. Using the example of a 1500mm coating, it will be possible to tolerate a 1500mm (5′) column of water for more than one minute before even a single drop appears through the fabric.

  • What are the meanings of the letters D and T following the fabrics?
  • The lower numbers are lighter and finer, while the higher numbers are heavier and rougher.
  • In terms of fabric weave, the lower numbers describe a loosely woven fabric, while the higher numbers suggest a firmly woven fabric The combination of these two figures can assist to determine the strength and feel of a piece of cloth.
  • With a “flat” end and a “pointed” end, the 7-point shape is aesthetically pleasing.
  • In order to create a covered space, the opposing “flat edge,” which is composed of three points, may be extended firmly and fastened to a shelter, vehicle rack, or even the pole-supported vestibule of a tent.
  • For the cable storage compartments, you may use paddles and sticks (which also function well).
  • What is the point of getting a footprint?
See also:  How To Clean A Tent For Storage

Made to match each individual model, it not only keeps your tent floor clean and dry, but it also protects the ground beneath the tent from excessive abrasion, helping to extend its useful life and reduce wear and tear.

What is the best way to store my tent?

Despite the fact that we utilize the finest polyurethane waterproofing available, extended contact to moisture promotes hydrolysis, which, in turn, causes the waterproof layer to break down, becoming squishy, sticky, and no longer effective as a waterproofing barrier.

Mildew will cause your tent to discolor and smell, and it will also cause the waterproof covering to break down prematurely.

Keep your tent in a dry, cool location away from direct sunlight if you intend to store it for an extended period of time.

An old pillowcase is an excellent option for those on a tight budget.

The use of guy ropes in your tent will increase its stability in windy or harsh weather situations while also increasing its breathability.

Pass the cord around the stake and back through the tensioner, being sure to maintain the curved side of the tensioner facing toward the stake throughout.

To tighten the cord, draw the tensioner up the length of the cord and then release the tensioner.

What causes condensation in a tent, and how can I minimize it when camping? Condensation is the accumulation of moisture within your tent as a result of temperature changes between the interior and outside of your tent. There are three primary sources of information:

  • Weather Conditions: High humidity, low temperatures, and wet weather conditions are the most conducive to condensation production. During the night, we create around 1 – 2 quarts of moisture from our breathing and skin evaporation. In a damp environment, moist ground or wet goods stowed inside the tent are both acceptable.

While there is no tent design that can completely prevent condensation, ventilation is the key to decreasing it. In order for your tent to function properly, cooler, drier air must enter and warm, damp air must depart. We’ve come up with a number of different approaches of accomplishing this. To begin, the tent’s body and roof are comprised of textiles that are both breathable and mesh. This makes it possible for moisture to escape from the interior of the tent. It must, however, be able to exit the waterproof fly, and every MSR rainfly is equipped with a peak vent that gives protection from the elements while yet allowing for the unrestricted movement of important fresh air through your tent.

  1. Always leave at least two vents open, if possible, to allow any wind to offer cross-flow ventilation for the best possible circulation.
  2. What causes condensation in a tent is demonstrated in this video.
  3. The amount of time you spend in a tent is directly proportional to its longevity.
  4. The lifespan of a tent that is used in harsh circumstances at high altitude, such as Everest Base Camp, is limited to a few months, but a well-maintained tent that is used very rarely in regular conditions can endure for several years.
  5. It is not required to clean your tent unless it emits an undesirable odor or becomes highly filthy and soiled.
  6. Set up your tent and hand wash it with warm water, a sponge, and a light, non-detergent soap if you need to do more extensive cleaning.
  7. Make sure to thoroughly rinse.

Tents should never be dry cleaned, machine washed, or machine dried.

What are the packaging weights and minimum weight requirements?

Packaging weight, in line with this standard, refers to the overall weight of the packaged items when they are taken off the shelf.

In many cases, the rainfly, poles, and footprint are all that are required to set up an MSR camping tent.

More information regarding packaging weight vs.

Why do real weights occasionally differ from weights that have been published?

As a result, you may discover that your tent weighs a few ounces more or less than the weight specified on the packaging.

Variations in coatings and textiles might result in minor weight discrepancies throughout the production process, depending on the application.

In the case of lightweight tents, this corresponds to only an ounce or two of weight. In larger tents, the price might be a little more. Here are a few possible explanations for the weight discrepancies:

  • Variations in coating thickness: The thickness of coatings on tent fabric might differ somewhat from one tent to the next. Fabrics are created in batches, which are referred to as “lots,” and there can be a tiny weight difference between lots as well as between different lots of the same fabric. Varying sizes and weights of fabrics: Because tent fabric is manually cut in up to 200 layers at a time, some sections may be cut just outside the line, resulting in some areas being slightly bigger and heavier than others. Weighing accuracy: At MSR, we weigh using calibrated lab scales, which are more precise than regular household scales. Addition of products:Brands may opt at the last minute to incorporate more stakes or guy ropes, which may increase the overall weight of their bundled goods.

Please see our blog post on the issue of tent weights for additional information on how we determine tent weights. What happens if one of my poles snaps or becomes damaged? If a tent pole breaks, you may use the pole repair sleeve to create a temporary splint to keep it from falling over. Slide the repair sleeve over the fractured section and keep it in place with tape or a stick to prevent it from moving. What can I do to keep mildew at bay? One of the most common ways to cause damage to your tent is to fail to dry it as fast as possible after it has been wet.

  • Mildew can cause the waterproof coatings to split from the fabric, leading them to be permanently damaged.
  • Mildew stains are difficult to remove.
  • If your tent seems dry after usage, it is always wise to double-check that it is entirely dry before putting it away for the winter.
  • Never dry your tent in the washing machine since the heat might cause the fabric to melt.
See also:  What Kind Of Leaves Do Tent Caterpillars Eat

How to Replace a Tent Pole Shock Cord

The elastic shock cord on your tent poles has deteriorated and has become brittle, making it no longer flexible. Given that new poles can cost up to $100 or more, why not simply replace the cord, which costs less than ten percent of the price of new poles? It’s been years since I’ve used my North Face Rock 22 two-person tent (which has two identical poles), and the elastic cord within the poles has become brittle and no longer retains its flexibility. I had purchased the tent brand new for around $200, and replacement poles were going to cost an additional $150!

I just needed 30 minutes and a pint of beer to get my tent poles back to their original condition!

You’ll need at least the whole length of all of your poles combined to complete the task.

a pair of scissors or a knife Sharpie or Marker for Measuring Tape Matches or a lighter are recommended.

Step 1: Cut the Cord and Remove the Grommet Pegs

Take a deep breath in and out. Pulling two parts of the pole apart and cutting the rope will do this. This will cause the pole to divide into its distinct parts (Mine has 8 sections per pole, and only the two end sections are different, so I made sure to keep those separate).

Remove the peg from the pole end and you should be able to see the standing end of the cord, which has been knotted and linked to the peg. Because my pegs were threaded, I had to detach them from the pole sections in order to use them.

Step 2: Measure Your Pole(s)

Following that, you’ll want to take measurements of your poles so that you can determine how long your rope should be. Because my tent has two poles that are exactly the same length, I only had to measure once. If you have many poles of varying lengths, you will need to repeat this step for each pole in your set. Measure the length of your pole from end to end; this will be the length of your rope when it is fully stretched. My experiments with the elasticity of the cable led me to the conclusion that for every foot of relaxed cord, I would receive 1′-4 of length “because of a stretched chord To get the final length (the length of the pole, hence the ultimate stretched length), we must multiply it by 75% of the original length.

Take the length of your pole in inches and multiply it by 0.75.

My poles are 152 inches in length, hence my measurement is as follows:152 inches * 0.75 inches = 114 inches” This is the spot where I put my relaxed chord marker.

It is quite difficult to feed a 114″ cable into a 152″ pole because of the length difference.

Step 3: Thread Your Peg and Knot the Cord

Feed the standing end of the cable (the end that is marked with a ‘zero’ on the tape measure) through the hole in the grommet peg and secure it with a rubber band. Draw the thread through a basic binding knot about 2 inches from the end and tighten it. Your peg should now be in the middle of the knot and the long end of the rope, as seen below. In order to avoid tripping, feed the cord through the first part of pole and continue until all portions are attached to the cord. Check to see that the pole portions are aligned appropriately so that they will fit together as intended before continuing (male end toward female end for each joint).

The long end of the cord should be stretched so that it reaches the mark you created earlier while the pole pieces are joined in the manner in which you would build the tent.

In this stage, the pole should be beginning to take form.

Step 4: Cut/Singe the Cord and Insert the Pegs

The cord should be cut with about 2 inches of remaining standing end.Singe the cord end to the pole (on both ends of the pole) with a lighter or matches.Fold the cord over over itself, putting it into the pole. Using one pole at a time, feed in the knot, thread the peg, and repeat the process for the other poles.

Be the First to Share

Determine the diameter of the cord that has to be replaced. When it comes to low-cost tents, this will often be approximately 2mm in diameter, which is not particularly sturdy or long-lasting. Depending on how large the opening diameter is of the pole, you may be able to utilize a thicker diameter than you originally planned. I increased the diameter of the cable on my tent poles from the standard 2mm to 3mm. The cable may be purchased on eBay for a reasonable price. I live in the United Kingdom and purchased 10 meters for around £3.

See also:  How To Store Your Tent

In order to set up a two-person dome type tent with two tent poles, you’ll need at least ten meters of space.

In an updated version of this post, I measured the original cable and discovered that it was half the length of the poles after they were completed.

As a general estimate, you could acquire a new cable that was 75 percent the length of the constructed poles, depending on the amount of elastic stretch in the existing cord.

Step 2: Find Your Threader

A threader, which you will need to obtain, will be required to feed the cord through. An nice metal threader was discovered within an old windshield wiper, which I was able to save. Consequently, when it is time to replace your windshield wipers, save them or borrow some from your neighborhood auto repair shop. The wiper blade assembly has two strips of metal that span the length of the wiper blade. You must remove these strips of metal from the wiper blade assembly. The greatest wiper blades are those from a saloon vehicle or a van since they have the longest blades available.

Please keep in mind that my photo displays a windscreen wiper, however it is too short.

Metal inserts are uncommon to be found in the lower-priced wiper blades.

Step 3: Join Threader to New Cord

You’ll need to locate a threader in order to pass the cord through. Inside an old windshield wiper, I discovered an amazing metal threader. If you need to replace your windshield wipers, store them or borrow some from a friend or from a nearby garage. The wiper blade assembly has two strips of metal that run the length of the wiper blade. You must remove these strips from the wiper blade assembly before continuing. A saloon vehicle or a van wiper blade is the finest choice because it has the most length.

Please keep in mind that my photograph displays a windscreen wiper, but it is too short.

Step 4: Remove Old Elastic Cord and Re-thread New Cord

Push the threader through the pole aperture after you have cleaned out the old cable from the poles. When it is sliding smoothly, slowly draw the threader through to the other end, where it should poke out the other end. Remember that if this is tough, it is likely that you have too much adhesive tape. Having passed through, pull the threader back through and continue to thread all the remaining poles. I use up the old elastic cord because I’m a thrifty person. lanyards and neck cords can be made out of the old cord if necessary.

Step 5: Tension Cord and Tie Off the Ends

Trial and error is required to achieve the desired tension, so after threading the entire pole, experiment with your cord tension. The tension must be light enough to allow the poles to be pulled apart, yet firm enough to keep them together when threaded through the tent’s opening.

The figure of eight knot is my preferred method of tying off the ends because it is a bigger knot that is also easy to alter. A more substantial knot at the end will last longer. You can then cut the cord after the tension has been reached to your satisfaction.

Step 6: Finished – Store Threader for Next Repair

You should have completed the repair of the tent poles by now. Remember to have your threader handy for when you need to repair your tent! I hope you have found this information beneficial. Thank you for taking the time to watch!

Be the First to Share

You should have completed the repair of the tent poles at this point. Remember to have your threader on hand for when you need to repair your next tent. I hope you have found this information to be of assistance. Please accept my thanks for your time.

Shock Cord (10 m) – Tent shock cord

  • We are devoted to providing decent working conditions and fair salaries to all of our employees. In addition to being a member of the Fair Wear Foundation (FWF), we are dedicated to consistently improving working conditions in all of our manufacturing plants. These facilities are inspected on a regular basis to ensure they are in proper working order. Having earned the position of Leader, VAUDE has reached the highest possible level of recognition as an FWF member.
  • Product that is climate neutral. It is necessary to examine and decrease the emissions that result from the production of raw materials, the manufacturing process, and shipment. By using myclimate, you may completely offset any emissions that are now unavoidable. Find out more information right away

Product Description

  • A replacement part that is quick and simple to swap out
  • A 10 m length

It’s always there when you need it. Replacement shock cable for quickly and simply replacing one that has frayed or been damaged. You can prepare your tent for your next excursion in a matter of minutes by following a few easy procedures – since long-lasting products are better for the environment.

  • Specs: Model:12860
  • Tent footprint:0,0 m2
  • Inner tent footprint:0,0 m2
  • Total weight:0,00 g
  • Dimensions:0,0 m2
  • Dimensions:0,00 kg

FeaturesTechnologies

Tent poles of superior quality from Yunnan Yunan Tent Poles are high-quality tent poles from a reputable manufacturer. This spare component is covered by a repair video, which can be found at help.vaude.com. FURTHER TECHNOLOGIESCLOSEFURTHER TECHNOLOGIESCLOSEFURTHER TECHNOLOGIESCLOSE

Leave a Comment

Your email address will not be published. Required fields are marked *