What Roof Rack For Roof Top Tent

Best Roof Racks And Crossbars For Your Roof Top Tent

Do you desire a Roof Top Tent but aren’t sure if your roof rack can support it? Or are you unsure of which rack or cross-bars to purchase? We receive these kind of queries a LOT, and we get them virtually every day. That is why we created this blog article in order to attempt to answer it for everyone who is in need! The next post will offer a few solutions for roof racks or crossbars that are likely to work with the majority of automobiles on the road. However, it is difficult for us to propose all of the available alternatives on the market, or to discuss all of the models in detail in this article.

Roof Rack for the Front Runner Slimline II Although we do not sell any of these items, we are pleased to recommend them and even provide you with further information if you require it.

The purpose of this website is to provide you with the information you want, to save you time researching, and to attempt to address any questions or concerns you may have before you get the opportunity to ask them.

Know The Basics:

One of the first things you need to determine is what kind of rack or crossbars you’ll need to be able to accommodate a rooftop tent. Check that the Dynamic Weight Capacity (DWC) of the rack or bars you intend to purchase is sufficient to support the weight of the tent, at the very least. The majority of models weigh between 120 and 165 lbs, therefore you will need a rack that can support more than 165 pounds to be on the safe side. What exactly is the DWC? Simply said, it is the maximum amount of weight that the rack is technically capable of supporting while the vehicle is in motion.

  1. Because of this, even if there are three people on top of the rack, the weight will be distributed evenly throughout the frame, rather than destroying it (as some may believe).
  2. Another essential consideration is the type of car you are driving about in.
  3. A Front Runner Featherlite RTT mounted on top of a Slimline II Roof Rack Kit is shown.
  4. Despite the fact that we have seen car top tents on vehicles such as the Honda Civic, we do not recommend them.
  5. Even while racks or cross-bars are capable of supporting nearly any tent, if your car is too tiny or not specifically designed for overlanding, the roof of your car may suffer damage over time due to the weight of the tent.

Make sure that your racks are mounted 32″-48″ apart on your car. Consider the roof rack kits and cross-bars that are recommended for your vehicle presently.

Front Runner Outfitters Slimline II Roof Rack Kit:

One of the largest and best-known manufacturers of automotive accessories, off-roading gear, racks, rooftop tents, and other camping equipment, Front Runner Outfitters is headquartered in the United States. This South African-based firm created the Slimline II Cargo Rack, which is suitable for a wide range of automobiles. It is available for purchase online (feel free toreach outasking if your vehicle make and model has a Slimline II designed for it). Although the one seen in the photo is for a Toyota 4Runner 5th Generation, there are several other models available, including those for aJeep Wrangler JKU 4 Door, aLand Rover All New Discovery, for aNissan Patrol/Armada, for aToyota Fj Cruiser, for aJeep Wrangler JK 2 Door, and many more.

  • and we’ll be pleased to assist you in locating the appropriate Slimline 2 Roof Rack Kit for your car.
  • It attaches to the factory mounting points that are already in place, albeit some drilling may be required in some situations.
  • This specific rack is constructed of T6 powder-coated aluminum and stainless steel, and it is a beast.
  • If you don’t have a mechanic, any local repair shop or mechanic will be able to attach this in about 30 minutes or less.
  • There is no restriction on the amount of weight that may be placed on this rack.

Gobi Stealth Rack:

The Gobi Stealth is one of the most popular racks among off-roaders with a lot of expertise. What is the explanation behind this? Quality, durability, and strength are important considerations. Considering that each Gobi comes with complimentary or optional features, you can rest assured that you’re getting a great bargain for your money. The Slimline is available in several configurations and versions to accommodate the various automobiles on the market, just as there are for the Slimline. Some of them are equipped with sunroofs, while others are not.

Because we do not sell the Gobi Stealth, we strongly advise you to contact them directly so that they can provide you with expert guidance.

The most impressive feature of the Gobi Stealth is that even when there is a lot of weight on it, the vibration will not produce any scratches on the top of your car (something that can happen whilst driving, with other racks or cross-bars).

In addition, the Gobi distributes weight away from the mounting holes and onto the A pillars of your car, increasing both the SWC and DWC of your vehicle. It can withstand up to 300 DWC and 600 SWC as a result of this.


When it comes to crossbars, there are a plethora of alternatives. There are a number of excellent brands available, like Rhino-Rack, Yakima, and Thule (to mention a few), that will fit virtually every car on the road today. iKamper Skycamp is a camping site in the sky. sitting on the crossbars of the crossbars In this category, you’ll find alternatives such as clip-ons, which are not permanent solutions and simply clip or clamp onto your vehicle’s door jamb curves or OEM side rails, depending on the model.

  • Why?
  • Despite the fact that they are capable of supporting the requisite 165 lbs, the fact that they are clip-on implies that they will not be as sturdy or as firmly fixed as permanent bars.
  • Therefore, we advocate more long-term solutions wherever possible.
  • Additionally, those that fit into the vehicle’s roof ditch, those that are fixedlyattached to your roof using a specific track mount, and those that drill into the side rails are all viable possibilities.
  • We recommend that you contact Rhino-Rack, Thule, or Yakima directly to find out which product is the best match for your car.
  • In the image below, for example, Blake Walker has provided us with three Rhino-Rack heavy duty trade cross bars, which he has placed on top of a Darche Panorama 2 rooftop tent.
  • This indicates that the weight is evenly distributed throughout the vehicle, allowing you to place heavier tents on top of it.

Front Runner Slimline II Load Bed Rack Kit:

Continuing the tradition, here is another Front Runner Outfitters Rack Kit, this time for the truck’s cargo bed. If you own a pick-up truck, there is another sort of configuration that you might want to consider. Many owners of Toyota Tacomas, Ford F150s, and other pickup vehicles have inquired about the best location for mounting their tent. We propose the Slimline II Load Bed Rack Kit, which is now again available for most pick-up vehicles and is quite affordable. It will still allow you to load items into your truck bed and to safely lay your RTT on top of it without any issues at all.

Another advantage of truck beds being longer than roofs is that you can fit a larger rooftop tent on the back of the truck, depending on the model.

That being said, the Slimline is constructed of T6 aluminum and stainless steel, and it is delivered complete with the pick-up load bed tracks, the load bed leg, the rack tray, and all of the necessary installation gear. It is necessary to drill. Take a peek at one by clicking on the link.

Smittybilt SRC Rack:

This is one of the most well-known Jeep racks, and it’s easy to see why. The SRC is manufactured by the well-known Smittybilt company, which is known for its Jeep accessories. The Overlander Roof Top Tent, which has become well-known, is also manufactured by them. Roof Rack for Smittybilt SRC Having said that, the SRC roof rack is available in a variety of sizes to accommodate different Jeep models. There is typically 4 to 5 inches of space between the cage and the vehicle’s primary bars, depending on the manufacturer.

Another advantage is the gaps in the bars, which can generate some noise if they are not covered, but they are not a problem if they are.

This roof top tent rack will certainly support any roof top tent, even the heaviest of them, but it is not the greatest rack on the market.

Other Bed Racks:

In order to make use of your roof top tent, particularly larger ones such as the4-person roof top tents or theiKamper Skycamp, you must first set it up. Having a bed rack that is as tall as the roof of your vehicle (a hi-lift bed mount) or even truck caps with a roof rack on top of them are perfect solutions for hauling heavy loads. You’ll have enough length in your pickup truck to employ any RTT if you do things this way. To learn more about his All-Pro Bed Rack, which he uses to transport a Tepui Kukenam 3 Siberian Camo Roof Top Tent, we spoke with Brandon Thomason of TopoTerra, who provided us with some information.

It is extremely lightweight and simple to install, as well as to load and unload items into the rack itself.

Bed of Toyota Tacoma with All-Pro Rack (photo by: Topo Terra) As can be seen in the photos he has shared, the tent is flush with the top of the truck, allowing you to store additional gear or items beneath the rack bed while maintaining a clear line of sight out the back of the truck, increasing safety by not blocking the rear view mirror and increasing visibility.

Other Options:

Roof racks and crossbars are plentiful on the market, as has been said several times. There are numerous brands and styles to choose from. Randell Keith Ziegler graciously shared his setup with us (image below). His Barricade Rack does not require any drilling on the roof, and he claims that it has functioned admirably so far.

Barricade Organizer (photo shared by Randell Keith Ziegler) This offers up additional possibilities for you to consider, not just the household brands, but also other brands available via local dealers, as well as custom-made roof rack kits, which may be one of the best solutions available to you.

Wrapping Up:

We hope that this blog article has provided you with some new information or insight. We recognize that it has been a lengthy process with a great deal of information and that there are several alternatives to consider. Is it any more difficult to select the most appropriate one as a result of this circumstance? It doesn’t actually do anything; it merely opens up possibilities. Start by familiarizing yourself with the fundamentals we discussed above, and then consider the type of roof top tent you want, its weight, the size of both the tent and your vehicle, the number of people who will be using the RTT, and your budget.

  • It’s unclear if there will be any fishing rods there or simply a tent. Tables for camping
  • What other items do you plan to use the roof rack or crossbars for, such as hauling equipment or kayaks on subsequent trips?

Every one of these queries will assist you in determining what you should be on the lookout for. From there, take a look at the solutions we’ve recommended above, and if any of them appeal to you, you’ll be in good hands. recognized brands such as Front Runner, Gobi, Smittybilt, ARB, TJM, Thule, Rhino-Rack, and Yakima are available, and you can be confident that they will not disappoint you. In the meanwhile, please contact us; we would be delighted to assist you with your roof top tent. As well as with any otherFront Runner Slimline II Rack that you may be interested in.

You may either write them down below or post them on our private Facebook group (CLICK HERE TO JOIN).

Three Rack Systems for a Rooftop Tent

If you’re the adventurous kind that constantly has one eye on the horizon for your next opportunity to hit the road for a cross-country road trip to explore the breathtaking American countryside, chances are you’ve thought about investing in a rooftop tent. No matter where you are, these tents will provide a comfortable place to sleep. It is possible to place a rooftop tent on virtually any vehicle. Do you want to take your Subaru Legacy on a road trip into the wilderness? Take a chance. Simply ensure that the rack arrangement you chose is capable of supporting the weight of the load.

Why a rooftop tent?

They may help you save money on hotel expenses as well as on the time it takes to set up and take down your campground. The rooftop tent serves as a home away from home when you’re on the road. It provides a sense of independence that is difficult to get elsewhere. If you have access to a car, you can practically set up camp and spend the night anywhere you choose. Take to the wilderness paths and continue till you are unable to continue any farther. Then put up your rooftop tent and prepare to remain till the next morning.

See also:  How To Setup Carbon Filter In Grow Tent

First and foremost, the average rooftop tent weighs between 120 and 130 pounds.

Choosing a rack system

Certain variables must be considered while selecting the best roof rack system for your car in order to accommodate your roof-top fantasies. The maximum Dynamic Weight Capacity, or DWC, of the rack system is most likely the most critical component to consider. This informs you how much weight the rack is capable of supporting when the vehicle is moving forward. Because a rooftop tent might weigh anywhere from 95 to more than 200 pounds, it’s important to know how much your tent weighs before choosing a roof rack for it.

As a result, practically any sedan, SUV, or pickup truck can withstand the weight of a rooftop tent and its passengers since the weight of the tent and its occupants will be uniformly distributed across the car’s whole chassis.

Rack systems

When it comes to selecting a rack for your rooftop tent, there are three main alternatives to consider. Roof racks with crossbars, a bed rack, and a complete roof rack like the one shown in the video below are the three basic possibilities. In order to pick amongst these three rack systems for your car, you’ll first need to decide which one is the best fit for you and your situation. The following attributes are allowed: ” src=” frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture; picture-in-picture; picture-in-picture;” allowfullscreen=””> An outdoor roof rack, such as this one from Front Runner Outfitters, is the ideal option if you want to put your tent up on the roof for the most of the time — and maybe forever.

  • Roof racks such as this attach to the car’s existing factory mounting points or clip on to minimize the need for drilling or other modifications to the vehicle.
  • As a result of the fact that many of these solutions are clip-on, they aren’t nearly as solid and dependable as a more permanent rack configuration.
  • You should use one of these if you believe your rig is more of a seasonal item and you expect to be away from it for an extended period of time.
  • Bed racks are particularly built for pickup trucks, such as the popular Toyota Tacoma, and other similar vehicles.
  • If you own a pickup truck, you may determine that this is the best option for your situation.

Do your research

If you had to go back and do it all over again, don’t bother. While you’re bound to discover things you want to change as you go, it’s wise to conduct your homework ahead of time and select a rack system that will suit your tent. It is also critical that the rack system be correctly aligned with your vehicle’s frame. These three rack systems should serve as a solid starting point for your investigation.

Do I Need a Roof Rack for a Roof Top Tent?

The popularity of roof top tents (RTTs) has skyrocketed in recent years, mostly because they allow you to camp anywhere your car can go while being warm and safe above the ground. But you can’t just buy an RTT and put it on the roof of your car and hope for the best – there are a number of factors to consider, including the sort of vehicle that is most suited for an RTT and the style of roof rack that will safely support your tent.

So, do you require a roof rack in order to use a roof top tent? Yes, in order to attach your roof top tent to your vehicle, you will need a roof rack. Aftermarket cross bars put on OEM roof rails are a simple solution, but a heavy-duty, permanently fitted custom rack is a more complicated solution.

What Kind of Roof Rack Do You Need For a Roof Top Tent?

The most important criteria for a roof rack is that it has a Dynamic Weight Capacity (DWC) that is equal to or more than the weight of the tent. A vehicle’s DWC is a measure of how much weight the rack can physically hold while the vehicle is in motion without causing damage to either the rack or the roof of the vehicle in question. Consequently, it’s typically advisable to purchase your RTT first so that you know exactly how much it weighs, and then choose a roof rack that can support at least that weight plus the weight of anything more that you want to add to the tent before purchasing your roof rack (solar panels, storage boxes, etc.).

For the purpose of determining whether or not your roof rack is strong enough to support your tent, total the weight of the tent, your weight and the weight of anybody else who will be sleeping in the tent, as well as the weight of any stuff that you intend to have in or on the tent.

Aside from that, you have entire control over the elements and design of the rack.

Depending on your needs, there are racks that are readily detachable and do not require any drilling into your car, and racks that are intended to be more permanent and are more difficult and impractical to remove on a frequent basis.

5 Popular Roof Racks for Roof Top Tents

It is important to note that there are several variations in the types, sizes, and weights of RTTs (which typically range from 100 to 200 pounds), which means that not every roof rack will be suitable for your exact tent and car. Nonetheless, there are several rack kinds that are really popular, and we’ll discuss five of the most common possibilities in the section below.

1. Yakima SkyLine System

The fact that RTTs come in a wide variety of shapes, sizes, and weights (usually ranging from 100 to 200 pounds) implies that not every roof rack will be suitable for your exact tent and vehicle combination (see below). Nonetheless, there are several rack kinds that are really popular, and we’ll discuss five of the most common possibilities in the next section.

2. Thule TracRac SR System

(Photo courtesy of thule.com) Website:thule.com Price ranges from $1,099.90 to $1,099.90. Many individuals prefer to put RTTs on a truck bed rack, which allows them to use the area below the vehicle to store other items. Thule’s TracRac SR System makes it possible for you to do just that. It has a rapid installation process that does not involve drilling into the vehicle, allowing the adjustable racks to be readily removed or modified to carry other items in addition to an RTT if needed, if desired.

Some RTTs are capable of supporting gear racks on top of them with large weight limitations (less when they are opened), but you will need to consider the overall weight of the tent plus the gear on top – unless you choose this rack with an absurd weight rating – when making your decision.

Additionally, this rack may be utilized for a variety of other purposes in addition to transporting your RTT, making it a perfect dual-purpose rack if you use your truck for business purposes.

3. Front Runner Outfitters Slimline II Roof Rack

(Image courtesy of frontrunneroutfitters.com) Website:frontrunneroutfitters.com Price ranges from $1,465 to $2,465 There are several various models of Slimline II Roof Rack available for a variety of different cars, and it is one of the most popular permanently fitted roof racks on the market. Installing it on the Toyota 4Runner is simple, as it uses eight factory mounting points, however drilling is necessary to secure the foot rails in place. Front Runner Outfitters has set the SWC as 660 pounds, despite the fact that they do not supply a DWC, citing the fact that there are other elements at play, such as load location, road conditions, and so on.

This rack is equipped with a wind deflector to provide a peaceful ride, as well as a set of foot rails to make installation simple.

It does, however, give enough clearance to permit 4Runners with sunroofs, if necessary.

Lastly, all Front Runner racks come with an industry-leading lifetime guarantee, which gives you piece of mind while making such a significant purchase.

4. Gobi Stealth Rack

(Photo courtesy of gobiracks.com) Website:gobiracks.com Price ranges from $1,595 to $2,495 Another extremely popular alternative for transporting an RTT is the Stealth Rack from Gobi. Each piece is finished in a black powder coating with an anti-rust base layer. It has a DWC of 300 pounds and a SWC of 800 pounds, and it weighs a total of 300 pounds. A rear ladder is also included for convenient access, and neither the ladder nor the rack require drilling into your car. This rack is available in two configurations: with a sunroof (which has an open space so you can clearly see out) and without a skylight (which has a greater rack surface area).

They are totally welded together, and the only screws used are to attach the rack to the vehicle’s existing mounting points, which are concealed by the welded construction.

With its sturdy structure, you can walk on it without worrying about it bending, and the basket design makes it ideal for hauling both RTTs and other items.

5. Rhino-Rack Pioneer SX Platform

(Photo courtesy of rhinorack.com) Website:rhinorack.com Starts at $1,147 (plus applicable taxes). This Rhino-Rack platform has a maximum weight restriction of 175 pounds, making it ideal for all but the heaviest of RTTs, according to the manufacturer. In addition, it is equipped with four highly sturdy slats that make it simple to secure gear or attach your RTT to it. The platform is constructed of lightweight reinforced nylon and aluminum that will not rust when exposed to the weather. Because of its flat form, you can simply slip your RTT onto it or place other equipment onto it.

In order to reduce wind drag and noise when driving, the platform is equipped with bars that are included in the purchase price. Numerous Rhino-Rack accessories are compatible with the system, and extra rail kits are also available for purchase.

Q A With Roof Top Tent Owner Tiffany

During my conversation with Tiffany (@4xploration) regarding her roof rack configuration for her RTT, she shared the following information: For your RTT, what kind of rooftop storage do you have available? “I have Gobi’s Ranger rack on my back.” Apart from the standard rack, this is the only rack that I’ve ever had.” (Photo courtesy of @4xploration) What factors went into your decision? “We chose Gobi because we like the basket design over the flat slats, which we did not like. “We chose the Ranger over the Stealth since the basket is larger,” says the author.

  1. We also purchased the larger basket since we remove our RTT when we get at our destination.
  2. The only disadvantage is that it significantly enhances our public profile.
  3. (Photo courtesy of @4xploration) A 2016 Toyota 4Runner with the CVTMt Shasta extended RTT is available for purchase.
  4. Consider the maximum height of your car, both with and without the roof top tent, as well as if the tent will be left on the truck or will be taken off.
  5. One thing to keep in mind is that racks have a rather significant wait time, with Gobi having the largest lead time because they are created to order.” (Featured image at the top of the post courtesy of @4xploration.) Roof Top Tents: What is the CHEAPEST HARD SHELL Roof Top Tent?
  6. (8 Favorite Budget-Friendly Options) What is the largest roof top tent that has ever been built?
  7. (10 People’s Favorite Songs)

What Supports a Roof Top Tent?

It’s understandable that someone who has never tented or used a roof top tent may be curious about how they function. From an even more fundamental standpoint, how are roof top tents stabilized while they are fastened on the roof of a vehicle or on the trailer? Roof top tents are supported by a roof rack system, which is mounted on the roof of your car or truck. In order for the tent to be firmly fastened to the roof rack system, crossbars must be installed on the system. However, while the simple answer is that roof top tents (RTTs) are mounted on a roof rack system, there are several more considerations to take into account.

Is there a difference between when the car is in motion and when it is parked? These are some of the themes that we will be discussing in greater depth later in this post. After which you will have an in-depth grasp of how roof top tents are sustained!

The roof rack

RTTs are almost always fitted to vehicles that are affixed to some sort of roof rack or trailer hitch. Whether it’s an aftermarket crossbar system from manufacturers like as Yakima, Thule, or Rhino-Rack, or a permanent roof rack, there’s something for everyone. Both accomplish the same thing and serve as a means of mounting the RTT in a safe manner. Aside from the rack’s ability to support the combined weight of you and the RTT, which we shall discuss in further detail in the following section, the most crucial feature is the presence of crossbars.

  1. This is our permanent rack, and the black section is the Yakima crossbar system, which is what I’m referring to in this post.
  2. It is for this reason that crossbars on your roof rack are very essential.
  3. It took me hours to find the right crossbar towers to match my current roof rack as well as crossbars that were strong enough to support the weight of my RV trailer trailer trailer.
  4. This will greatly save your research time and will also act as a useful guide, complete with photographs and unbiased ideas!
  5. This will allow your tent to open toward the back of the car rather than to one of the sides.
See also:  How To Set Up Fan And Filter In Grow Tent

Vehicle and rack weight limits

Following a thorough grasp of which racks should be utilized to support an RTT, it is equally necessary to be aware of some critical weight limitations that must be adhered to. First and foremost, you must determine the weight limit of your vehicle’s roof! The majority of the time, this will not be an issue. Vehicles are built to be able to support their own weight in the event that they are flipped. In the case of a fairly small automobile, I would recommend double-checking the owner’s handbook just to be on the safer side.

  • Because each rack can support a varied amount of weight, this is a significantly more time-consuming and research-intensive procedure.
  • If you want to know how much weight your rack can carry while your vehicle is moving, look up dynamic weight limit (DWL).
  • When rack manufacturers indicate the maximum weight capacity of their racks, they nearly invariably refer to the DWL (Drop Weight Limit).
  • In general, you should anticipate a crossbar system to be able to support around 700 pounds, give or take.

Because of the obvious reasons, this is critical in order to avoid overloading the RTT with excessive weight. RTTs are capable of supporting approximately the same amount of weight. They often weigh between 650 and 1,000 pounds.

What else can support a RTT?

Following a thorough grasp of which racks should be utilized to support an RTT, it is equally necessary to be aware of certain significant weight limitations for this type of vehicle. First and foremost, you must determine the maximum weight capacity of your vehicle’s roof. The majority of the time, this will not be a problem. In the event that a vehicle flips over, it is built to support its own weight. However, if you have a fairly small automobile, I would recommend double-checking your owner’s handbook just to be on the safer side.

  1. In addition, because each rack may support a varied amount of weight, this is a far more research-intensive procedure.
  2. If you want to know how much weight your rack can carry while your vehicle is moving, look up “dynamic weight limit” (DWL).
  3. A lot of times when rack manufacturers specify the maximum load capacity for their products they are referring to the DWL (Deadweight Limit).
  4. The average crossbar system is capable of supporting around 700 pounds, give or take.
  5. In terms of weight capacity, RTTs are comparable to other types of vehicles.

Wrapping Up

While the RTT is often supported by the vehicle’s roof, the roof rack is the most important component in terms of keeping your tent in position. The RTT is attached to your crossbar system, and the crossbar system is attached to your side rails, which are attached to your vehicle’s frame. The concept is straightforward in principle, but it is critical in reality to ensure that no weight limitations are exceeded at any time. If you found this material to be useful, I encourage you to visit our YouTube channel for further fascinating and useful information.

There you can find some unbiased evaluations of the camping gear I have tried and tested over the course of a year’s worth of camping adventures.

Thank you for taking the time to read this, and I hope I was able to address all of your concerns about how RTTs are supported!

What kind of roof racks do you need for a roof top tent?

There are no comments / Roof racks are now available in a variety of designs and sizes. When it comes to roof top tents, we receive a lot of questions, and one of the most frequently asked is “what kind of roof racks do you need for a roof top tent?” It’s not difficult to understand why people are drawn to the notion of roof top tents: they provide adventure, pleasure, independence, nature, comfort, and ease.

great! However, there are several practical considerations to bear in mind. Roof racks are a great addition to any home.

  • Square bars are less difficult to deal with than whisp bars, which are oval in shape. Square bars have a narrower width than round bars, and most mounting plates that come with a tent will accommodate them. You may need to hunt for a replacement to the ones that were provided because they are broader and not all plates will be suited for them. OurOrson roof top tents are equipped with mounting plates that can be used with bars ranging in width from 4cm to 8cm in width, which should accommodate the majority of racks on the market.
  • To work with, you’ll need a straight bar that’s around 86cm wide and free of obstructions. To attach Orson roof top tents, the mounting tracks beneath the tent are around 80cm apart, and you will require clear bar to bolt them into – no plastic mounting fittings underneath, and no bends in the racks that will interfere with the plates that will clamp onto the roof racks. Roof racks with weight ratings should be avoided. Because a roof tent normally weighs more than 60kg, it is recommended to choose racks that have a load rating of at least 75kg, and preferably 100kg or more. These ratings are for dynamic weights, which are weights that change as a vehicle moves in order to cope with braking and turning. The static weight on the racks is significantly more than the dynamic rating
  • As a result, Try to get racks that will allow for a decent amount of space between the roof and the racks. To tighten or loosen the bolts, you’ll need to get your hands into the space. Things will be easier if there is more space and greater access. In order to use your roof top tent ladder and annex, you must ensure that the height from ground level to the top of the roof racks is within reach of the ladder and annex you desire. The majority of ladders are approximately 2m in height, and annexes can accommodate a set up that is around 2m in height or an XL set up that is around 2.2m in height. If your roof racks are mounted at 2.4m above the ground, something has to give
  • Consult with a roof rack vendor for guidance. In order to identify racks that are suited for your model car and compatible with mounting a roof top tent on top, they will consult their computer database for assistance. Most cars can accommodate a set of racks (as well as a tent), but you should get professional guidance and double-check the weight capacity of your vehicle’s roof with the manufacturer beforehand.

Alternatives are available.

  • Truck bed frames and racks – some guys are putting together racks and frames to go over the ute trays to use as tent platforms. In the near future, we plan to have a frame that can be installed on ute backs. Rooftop baskets – make sure the bars are strong enough to support the weight of the tent, as they weren’t designed to support the weight of a tent. Also, make sure that the roof top tent ladder is long enough to accommodate the additional height that the baskets bring to the set-up. Roof top platforms – in most cases, they will function great, but depending on the width and orientation of the slats used, it may be necessary to exert some effort in order to ensure that the roof tent can be fastened securely. Trailers – some people are erecting their roof tents on the back of a trailer. In addition to the gear beneath, the roof tent structure and bars are used to transport kayaks and other items using removable H bars over the packed tent. In addition to adding a big living area to your upstairs bedroom, automobile awnings are an attractive and simple method to do it. A roof rack that is capable of supporting both a tent and an awning could be something to consider.

Sorted! Yeah, but nah? If you have any further questions for which we can provide answers, please contact us at 0210405991.

The Best Roof Racks For a Roof Top Tent

Looking for the finest roof rack for a rooftop tent? We’ve got you covered. Learn how to select the most appropriate roof rack for your vehicle and camping style. Yakima offers a wide selection of roof racks that can be customized to fit any vehicle. When it comes to camping, rooftop tents are ideal for both experienced and newbie campers since they give ease and comfort. While rooftop tents may appear to be a luxury camping item, you’ll discover that they have a plethora of advantages. In addition to being wonderful for all seasons, rooftop tents are also great for getting you off the ground.

You will also avoid being bitten by creepy crawlies at all times.

Our Skyrise HD Tent

Our Skyrise HD Tent is composed of ripstop polyester fabric and has a waterproof PU covering that is 3000 mm in length. A waterproof rainfly is also included, so you won’t have to worry about the rain or wind coming inside again. This tent is especially ideal for tough campers who like to travel at a fast pace and want to be able to have their rooftop tent ready at all times while on the go. This tent is also ideal for the more laid-back camper who wants to set up an useful and comfortable base camp without breaking the bank.

We are frequently asked about the best roof racks for a rooftop tent, and we have a few suggestions.

It makes no difference whether you drive a rugged utility vehicle or a sophisticated SUV; our roof racks provide a secure platform for a rooftop tent.

Crossbars for Your Roof Top Tent

Yakima LockNLoad Bars are our extremely sturdy roof racks that are available in a variety of sizes to fit a wide range of automobiles. Designed from powder-coated aluminium with a superior e-coating, which provides the highest corrosion protection while still providing exceptional performance even in the most demanding environments. The east-to-west orientation of the rack provides you with additional alternatives when it comes to securing your load and enhances the distribution of your weight.

Find the Perfect Option for Your Vehicle

Visit our car finder page for more information. Fit my automobile in order to determine the best solution. If you want to use a rooftop tent, you can choose the finest roof rack choice. Remember that the finest roof rack for a rooftop tent is always the solution that is most appropriate for your car and its roof rating, as well as your camping preferences.

Believe us when we say that after you’ve tented with a rooftop tent, you’ll never want to camp without one again! The most recent update was on October 23rd, 2020.

Share this

The most frequently asked question concerning a rooftop tent is, “Can I transport one in my car?” While it is feasible to fit a tent on the back of most cars, there are a few things to keep in mind before continuing on your journey. Dynamic Weight: This refers to the amount of weight that your roof rack can support when the vehicle is in motion or in reverse. Rooftop tents are generally between 100 and 200 pounds in weight. If your vehicle came equipped with a factory-installed roof rack, you’ll want to check the handbook to see what kind of weight your rack is capable of supporting.

The weight capabilities of aftermarket roof racks, such as those manufactured by Thule and Yakima, are nearly invariably higher than those of factory racks.

Static Weight: All roof racks are capable of carrying substantially greater static weight than they are capable of carrying dynamic weight.

Just make sure not to overcrowd your tent and bring a two-person tent for a total of six adults, and you should be OK.

What if Your Car Doesn’t Have a Suitable Rack Listed?

If your car just offers the choice of a clip-style roof rack, you aren’t completely out of alternatives just yet. There are a multitude of unique roof rack choices available for practically every car from Rack Attack. We can give your roof the ability to carry a roof rack capable of carrying a tent by installing mounting points (similar to what manufacturers will do at the factory), and best of all, the rack will look more factory and will be guaranteed for the duration of your ownership of the vehicle, saving you money.

See also:  What Temperature Should A Grow Tent Be

What Rooftop Tent is the Best?

This is a question that can be answered with as much ease as “How long is a piece of string?” Because we believe Tepui and Yakima are the two companies that produce the highest-quality tents currently on the market, we offer a large selection of tents from both brands available. However, deciding which model to purchase from these two manufacturers is a very different affair. It all boils down to how big you need your tent to be and how you intend on utilizing it. Do you intend to take down and put up the tent on a regular basis?

However, because this hardware lifts the base of the tent a few inches over the tepui, a tighter and lower fit may be preferable if you want to leave the tent in place on a regular basis rather than occasionally.

Tent manufacturer Tepui produces “Ruggedized” versions of their most popular tents, which are well worth the additional money if you intend on spending a significant amount of time in the mountains.

In fact, everything about the tent is beefy and sturdy. This is the sole option available to the serious explorer. For the rest of us, the additional expense is unlikely to be worth it, and both tents are backed by a 2-year manufacturer’s warranty.

Can I get a Car Tent Installed by Rack Attack?

Yes, you absolutely can! Our professional rack installers will have your roof rack and roof tent up and running in no time at all. Remember to contact ahead to ensure that we have the components you require in stock before coming in. If not, we can always order them in and have you back on the road in a matter of days or even hours!

Can I order Car Tent Online?

Yes! However, there is one important caveat: Rooftop car tents are sent on a complete pallet skid, which means we may have it delivered directly to your door, but shipping companies will only deliver to a commercial location. Providing you can locate a commercial address where the tent can be delivered, we can have your purchase completed and started immediately.

Are Car Tents Really that Awesome?

The shop will not function properly if cookies are deactivated on your computer or device. $1,169.00 (excluding of tax and shipping) Currently in stock When fully assembled, this roof top tent is 1.3 meters wide by 2.4 meters long. The super-low 330mm profile decreases wind resistance while driving and lowers the vehicle’s overall height by almost one meter. The Front Runner Roof Top Tent has the lowest profile of any roof top tent currently available on the market! In order to purchase Roof Top Tent by Front Runner, you must purchase it in multiples of 1.

  • Equipment and guidance that has been tested and proven You may put your faith in us. Money refund guarantee for 30 days Guarantee
  • Off-road construction was used. Tough
  • Easily attaches to the top of your Front Runner Roof Rack to provide quick, easy, and comfortable shelter wherever you go
  • Sleeps 2+ people in comfort
  • An immediate bedroom is created with a single seamless motion. Weighing only 43kg, it is far lighter than all other comparable roof top sleeping options now available on the market. The body of the tent is made of 260g poly-cotton ripstop fabric, which is water-resistant and durable. Full-coverage rainfly made of waterproof, UV-resistant 400d polyester oxford fabric for maximum protection. With the help of convenient side-release buckles, you may simply remove or install the item as needed. A solid, insulated foundation is provided by a durable base consisting of an aluminum frame, sheeting, and dense foam core. High-density foam mattress (6cm / 2.25″ thick) with a machine-washable, moisture- and mildew-resistant polyester oxford fabric cover for added comfort
  • It is possible to unzip skylight vent windows in the roof to allow for fresh air, sunshine, and starry views, or they can be sealed to trap heat and keep out the weather
  • The side window privacy panels zip up to close, allowing the size of the aperture to be modified according to privacy requirements or weather circumstances
  • The side window privacy panels zip up to close
  • A total of two hanging pockets give enough storage space for personal belongings (34cm by 22cm / 13.5″ by 8.5″)
  • The heavy-duty 650g nylon tent cover is made of durable PVC coating and will protect your tent when it is packed and in transportation. Tracks for mounting (included) can be installed either from the front to the back or from side to side, depending on your requirements. Included are universal mounting plates as well as all essential hardware. Upgrade to our Quick Release Tent Mount Kit for faster and simpler installation and disassembly. Incorporate a handy shelter below with ourRoof Top Tent Annex, which slides simply into the channel of the tent foundation
  • It comes with an integrated sliding aluminum ladder. The weight limit for the ladder is 180kg/400lbs.

It should be noted that if the tent installation height is greater than 2 meters, you will want a Tent Extension Ladder. NOTE: Front Runner Tent Mounts:Tent Mount Kit,Tent Mount Kit / TallorQuick Release Tent Mount,Tent Mount Kit/ TallorQuick Release Tent Mount The following are the recommended mounting techniques for this Tent. The set includes:1 x Tent 1 piece of flysheet 1 × Bed (mattress) 1 × Tent with a cover 1 x Sliding stairwell 1 × Rod & Reel Kit Mounting studs are included with this package.

Rainfly made of 400d polyester oxford that is waterproof and UV resistant.

Padding for Mattresses: 60mm ” (2.25″) thick polyurethane foam with a high density 650g heavy-duty PVC for the tent cover; aluminum sheeting and side rails with foam core for the tent base.

Dimensions of the tent: 1330mm when closed (including cover and ladder) ” (52.4″) Dimensions: 1245mm (49″) L x 330mm (13″) W (13″) Height with cover and ladder: 1295mm Height without cover and ladder: ” (51″) 1220mm L x 1220mm W ” (48″) 216mm W x 216mm H ” (8.5″) Dimensions of the HOpen: 3330mm for the outside with a rainfly ” (131″) 1330mm (48″) L x 2290mm (90″) W x 1330mm (48″) (52.4″) Interior Dimensions: 2438mm ” (96″) L x 1295mm (51″) (51″) 1168mm W x 1168mm H ” (46″) L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L (A Peak) Dimensions of the mattress:1990mm ” (78.4″) 1210mm (47.2″) L x 1210mm (47.2″) W x 60mm (2.4″) HWeight:43 kilograms (93lbs) Load Capacity: 270kg (600lbs) In order to access the fitting instructions, you must have Adobe Acrobat Reader installed.

iKamper – The All-You-Need-To-Know Roof Top Tent Guide

The date is October 21, 2020. Numerous campers and overlanders are already aware with the iKamper roof top tents, which are well-known for their creative designs and functionality. But how does one go about getting a roof top tent up and running, and how do they function? If you are thinking about purchasing a roof top tent for your outdoor excursions, there are a few things you should consider before making your purchase. This tutorial will assist you in learning the fundamentals of roof top tents, such as vehicle requirements, installing a roof top tent, opening and shutting a roof top tent, the advantages and disadvantages of roof top tents, and helpful accessories.

Roof top tents are mounted to your car using crossbars or a roof rack, and it’s critical that these bars and racks be capable of supporting the weight of the tent and the contents inside it.

iKamper owners opt for aftermarket crossbars or roof racks, such as those manufactured by Front Runner, Thule, or Rhino Rack, which are significantly stronger and can support significantly more weight.

When you talk about dynamic weight, you’re talking about the weight that your vehicle can hold while it is moving.

Even though the Skycamp 2.0 weighs 160 lbs (73 kg), it has a dynamic weight load requirement of 165 lbs (75 kg), which takes into account the mounting brackets and any locking mechanisms.

As a result, the static weight limit of your vehicle is substantially larger than its dynamic weight limit, owing to the weight being more uniformly distributed over the vehicle’s whole structure.

Along with weight restrictions, the crossbars must be at least 30 inches in length “In order to uniformly support the weight of a roof top tent and its inhabitants, the beams must be spaced 76 cm away from one another.

The revised High Comfort Ladder from iKamper includes angled steps for a more pleasant experience, and it is capable of supporting up to 330 lbs / 150 kg of weight.

Please keep in mind that certain roof racks have higher outer perimeter rails, which might make it difficult to properly attach a roof top tent.

When it comes to installation, iKamper employs the newMounting Brackets, which are included with the purchase of every tent.

You only need to push the hardshell a little amount when it has been opened; the gas struts will take care of the rest, elevating the tent to its full height.

Only the tension poles for supporting the tent’s fabric need to be installed, and you’ll be finished with your project!

Instead of a hardshell with latches, the X-Cover includes a zipper that can be opened and closed.

In a manner similar to how hardshell roof top tents are opened, you may use the ladder to expand the panel by stepping on it.

ROOF TOP TENT CLOSURE INSTRUCTIONS The iKamper hardshell roof top tents close in the same amount of time as they open.

The next step is to fasten and lock the hardshell latches, after which the operation is complete.

It’s important to tuck the canvas inside the cover so that you can zip it all the way up.

This is demonstrated in the video below: You may learn more about setting up a roof top tent as well as how to open and close it by visiting this link.

What do you think about going camping alone, with a friend, or with your whole family?

The Skycamp 2X and the Skycamp Mini are excellent choices for campers traveling alone or in couples.

Despite the fact that it performs similarly to classic clamshell roof top tents, the Skycamp 2X offers significantly greater storage space when its hardshell is closed.

1.8 inch (4.5 cm) thick foam mattress for the Skycamp 2X is 51 by 77.5 inches (129 by 197 cm), while the Skycamp Mini’s 1.6 inch (4.5 cm) thick foam mattress measures 80.7 by 50.4″ (205 by 128 cm).

Both of these variants have a higher capacity, allowing them to seat three adults or two adults and two children respectively.

Neither of these tents has a king-size mattress, but both have foam mattresses that are roughly equivalent to one.


Are you seeking for a tent that can be set up and taken down in minutes?

What if you’re going camping with a group of individuals who will all be sleeping in the same tent as you?

When the tent is closed, do you want to have a place to put your bedding within the tent?

Hardshell roof top tents are the quickest to set up and take down of any roof top tent on the market.

Soft shell roof top tents, like conventional ground tents, require more time to put up and take down than hard shell roof top tents.

Soft shell roof top tents are not available from this company.

This is especially crucial when organizing camping vacations with other people, especially if they aren’t providing their own tents.

If you are camping alone or with only one other person, the Skycamp 2X and Skycamp Mini are the best options because they are designed to accommodate two people.

Tents with lower footprints are required in these situations, and the Skycamp Mini’s compact footprint is the ideal option for this.

It is the best option for your requirements.

THE ACCESSORIES FOR ROOF TOP TENTSFor campers who are wanting to enhance their roof top tents and achieve an even more pleasant camping experience, iKamper provides a wide range of handy accessories for purchase.

There are additional devices that provide security, like as mounting bracketlocks, that prevent anyone from tampering with your tent when it is unattended while you are away from home.

All of these iKamper accessories, as well as many more, may be found on this website.

We hope you have found this post to be useful and instructive. Our customer service team is here to answer any queries you may have. Please let us know how we can be of assistance. Contact us at [email protected], and have a look at theiKamper Community for further information.

Leave a Comment

Your email address will not be published. Required fields are marked *