How To Set Up Carbon Filter In Grow Tent

HOW TO SET UP A CARBON FILTER IN A GROW TENT

Make your grow tent clean and odor-free by properly installing a carbon filter system and an inline fan system in your growing space. When growing plants inside, there may be a lot of undesirable scents and potential pollutant issues that can be harmful to both you and your plants’ health if not addressed. Installing a carbon filter and an inline fan system in your grow tent will help to alleviate both of these problems. Mold and mildew contamination concerns are often resolved by maintaining a proactive and clean garden, however not everyone is as conscientious as you may think.

But how can you assure that it is correctly configured to clean the air in the manner in which it is intended to do so?

I’ll go over the most prevalent layouts and explain why one is preferable to the other and why.

Conduit should be run from the filter to the fan and then from the fan to the exterior of the tent.

  1. METHOD 2METHOD 2: INSTALL FILTER INSIDEFAN OUTSIDE GROW TENT METHOD 2METHOD 2: INSTALL FILTER INSIDEFAN OUTSIDE GROW TENT The filter should be attached to the inside of your tent near the exhaust vent, as specified in the instructions.
  2. Check to see that the fan is sucking air from the interior of the tent out to the outside.
  3. Install ducting from the fan to the exhaust port and then to the filter outside the tent to complete the installation.
  4. THE FOURTH METHODOLOGYMETHODOLOGY 4: INSTALL BOTH FANFILTER OUTSIDE THE GROW TENT Directions: Attach ducting to the top of your grow tent, near the exhaust port, and secure it in place.
  5. Attach the filter to the fan and check to see that the fan is sucking air from the interior of the tent out to the outside.
  6. While any of these configurations will produce the intended result, the first configuration is the most effective.
  7. For the second time, the majority of inline fans now on the market indicate in their user manuals that the air entering the fan must be filtered in order to avoid damage or increased wear and tear over time.

Your carbon filter and inline fan are now ready for installation! Make sure to check out my equipment recommendations page for the greatest grow goods available on the market today. Purchase everything you require now and begin developing right away! ​

Carbon Filters: Should I Use One in My Grow Room?

So you’ve finished building up your grow room and have begun cultivating some plants in it. Congratulations! You may not be aware of it at first, but gradually you will discover that your growing area has a distinct odor. Chances are you’ll want to keep the smells of your grow area to yourself, whether it’s the strong fragrance of your plants or a slight stench from the humidity in the air. Use of a carbon filter in your grow room is highly recommended, especially if you want to keep the operation’s location secret or if you just want to keep the odours from your growing space out of your home.

What Are Carbon Filters?

A carbon filter, like most other air filters, is intended to cleanse the air that enters it while also exhausting new air into the surrounding area. Using carbon media, these metal cylinders are filled with air and connected to a high-output fan in order to remove smells and particles from the air in your growing environment. In order to accommodate the size of your grow room and the quantity of filtering you want, carbon filters are available in several different sizes and configurations. When your grow room is correctly set up, all of the air from your grow room will pass through the filter, and the scents in your grow room will be completely eliminated.

How Carbon Filters Work

A carbon filter, like most other air filters, is intended to cleanse the air that enters it while also exhausting new air into the surrounding area of the building. Using carbon media, these metal cylinders are filled with air and connected to a high-output fan, which helps to remove smells and particles from the air in your grow area. In order to accommodate the size of your grow room and the amount of filtering you want, carbon filters are available in many different sizes. When your grow room is correctly set up, all of the air from your grow room will pass through the filter, and the scents in your grow room will be completely removed from the environment.

Using a Carbon Filter in Your Growing Area

A carbon filter, like most air filters, is intended to cleanse the air that enters it and exhaust new air back into the space. These metal cylinders are filled with carbon media and connected to a high-output fan in order to remove smells and particles from the air in your grow area. Carbon filters are available in a number of sizes to accommodate the size of your grow room as well as the level of filtration you require. When your grow room is properly configured, all of the air from your grow room will pass through the filter, and the scents in your grow room will be eliminated.

Find the Right Size

Despite their similarities, all carbon filters are not created equal. Carbon air filters come in a variety of sizes, depending on the size of your growing space and the cubic feet per minute (CFM) value of your exhaust fans. The size of your carbon air filters will depend on these factors. You will need to complete the following procedures in order to calculate the CFM value:

  • Obtain the dimensions of your grow room or grow tent: height, breadth, and length. In order to determine how much space you’ll be occupying, multiply these numbers by one another, as follows: Calculate the value by multiplying it by the current exchange rate (the number of times you want the air to be completely exchanged each hour). Once per minute multiplied by 60 equals a continual flow of fresh air
  • To achieve this, multiply by 60 equals once every minute
  • Your CFM is calculated by dividing this value by 60.

The most accurate technique to determine what size carbon grow room filter to use is to make sure that the CFM value of your filter is either equal to or lower than the CFM values of your grow room and exhaust fan combined.

Consider the following scenario: you have a5ft x 5ft x 8ftgrow tent:

  • Multiply5x5x8. This amount is equivalent to the cubic feet of your growing space (200)
  • The cubic feet (200) are multiplied by the number of exchanges every hour (60), resulting in a total of 12000
  • A total of 200 CFM may be obtained by multiplying that amount (12000) by the number of minutes of exchange in an hour (60). Take the 200 CFM that you now have and seek for a filter that meets or surpasses that CFM

As a general rule, it is usually preferable to exceed your CFM requirements rather than to fall short. If you purchase a smaller filter than you would use, the carbon will be depleted rapidly.

Set Up Your Filter

It is usually preferable to exceed your required CFM capacity rather than to fall short of it. In order to save money, you should get a smaller filter than you would need.

Maintain Your Carbon Filter

When all of the pores, or adsorption sites, in the carbon are completely occupied, your carbon filter will no longer be able to catch any more molecules in the water. Maintaining your carbon filter is as simple as making sure it is cleaned on a regular basis – generally once a month. To clean your filter, you should first remove it from your grow room and shake it to remove any dust and debris that has accumulated within. Note: Contrary to common perception, cleaning charcoal in a filter with water and soap might actually have a negative impact on the filter’s performance.

You will eventually reach a point at which your carbon filter will be unable to trap as many molecules as it used to be able to.

If you begin to detect an unpleasant odor even after cleaning the filter at home, it is likely that you need to replace the filter.

Should You Use a Carbon Filter in Your Growing Area?

The answer to that question is an emphatic one. For keeping the stench from your growing area out of your home and away from your neighbors, carbon filters are the most effective alternative. More significantly, they are the most effective method of ensuring that even the most fresh air is used by your plants for growth. It’s important to note that there are various short-term treatments available, such as air purifiers or neutralizing sprays and powders, that you can employ. Having said that, these instruments will not totally eliminate the odor from your growing operation, nor will they completely eliminate any dust particles that may have escaped from your grow space.

Carbon filters are the most effective way to ensure that your grow room is completely odor-free while also preventing odors from escaping your growing environment.

The Best Place to Install Your Carbon Filter

Cannabis producers are generally concerned about maintaining their privacy since the odor it generates may be quite strong and nasty. Naturally, they resort to powerful odor scrubbers such as a carbon filter, which they can attach to their ducting and use to capture odors in a charcoal bed. While the equipment in a grow tent can be organized in a variety of ways, there is a certain location where a carbon filter should be installed.

The Most Recommended Location

As a result of the strong and unpleasant scent that cannabis produces, most growers want to maintain their privacy when cultivating their crops. To combat this, they use powerful odor scrubbers, such as a carbon filter, which they can attach to their ductwork and use to trap odors in a charcoal bed.

The equipment in a grow tent can be configured in a variety of ways, but there is one location in particular where a carbon filter should be installed: the center.

Other Locations

When it comes to cannabis cultivation, most producers prefer their privacy, as the odor it generates may be powerful and terrible. As a result, companies resort to powerful odor scrubbers such as a carbon filter, which they can attach to their ducting and use to capture odors in a charcoal bed. While the equipment in a grow tent may be placed in a variety of ways, there is one location that is excellent for installing a carbon filter.

How To Set Up a Carbon Filter In A Grow Tent

It’s important to remember that while growing inside, the last thing you want is for musty plant aromas to fill your house, unless you’re growing something fragrant and gorgeous. Indoor growth can also create smells and toxins that are potentially harmful, such as those produced by soil, fertilizers, and the plants themselves. The most effective remedy for this would be to incorporate activated carbon filters into your airflow system in order to control smells and pollutants. Using this article, I’ll teach you how to set up a carbon filter in your grow tent, which will allow you to manage and clean the air while still keeping effective circulation.

First let’s start with all the stuff you will need:

  1. Filter with carbon that is appropriate for the size of your growing tent
  2. There are a variety of sizes available, but most commonly they are available in 4, 6, and 8 inch widths
  3. To connect your carbon filter to the fan, you’ll need aluminium ducting or another form of ducting
  4. Normally, this is included with the carbon filter so you won’t have to seek for ducting that fits the size of your carbon filter
  5. Heavy-duty rope clip hangers and other hanging devices are available. Duct clips are used to provide an airtight seal between your fan and the fitting
  6. You’ll need an appropriateextractor fan for your grow tent to keep the airflow under control. Duct tape is used to produce a more secure closure. (Aff.links)

Filter made of carbon. the width of your growing tent is appropriate for the size of your growing tent; there are many different sizes to choose from, but the most common are 4, 6, and 8 inch wide; To connect your carbon filter to the fan, you’ll need aluminium ducting or another form of ducting; often, this is included with the carbon filter so you won’t have to seek for ducting that fits the size of your carbon filter; and Heavy-duty rope clip hangers and other hanging equipment; Duct clips are used to provide an airtight seal between the fan and the fitter.

For your grow tent, a suitableextractor fan will help to maintain the airflow under control.

(Aff.links);

Let’s Begin!

Filter made of carbon that is appropriate for the size of your growing tent; there are a variety of sizes available, but the most common are 4, 6, and 8 inch wide; To connect your carbon filter to the fan, you’ll need aluminium ducting or another form of ducting; normally, this is included with the carbon filter so that you don’t have to seek for ducting that fits the size of your carbon filter; Heavy-duty rope clip hangers and other types of hanging equipment Duct clips are used to provide an airtight connection between your fan and the fitter.

You’ll need an appropriateextractor fan for your grow tent to keep the airflow under control; Use duct tape to ensure a more secure closure.

Does it matter if the carbon filter is outside or inside?

Activated carbon filter that is appropriate for the size of your growing tent; there are a variety of sizes available, but they are typically available in 4, 6, and 8 inch widths; Aluminium ducting or another form of ducting to connect your filter to the fan; normally, ducting is included with the carbon filter so that you don’t have to seek for ducting that fits the size of your carbon filter; Heavy-duty hanging equipment, such as heavy-duty rope clip hangers; Duct clips to provide an airtight seal between your fan and the fitter; A suitableextractor fanfor your grow tent to maintain the airflow under control; Duct tape is used to create an extremely tight closure.

(Aff.links);

How can i reduce the noise and make it smell nicer?

When carbon filters and extractor fans generate a lot of noise, you may wish to put your extractor to a wall for reduced vibration, or you may want to hang your extractor inside the grow tent with the filter to reduce the amount of noise. Using a sponge air freshener within the filter to provide a pleasant fragrance around your grow area is another option. Alternatives include upgrading to acoustic-insulated ducting to eliminate vibrations altogether.

Carbon Filter Outside Grow Tent- Guide & Warnings

Home»Environment»Carbon Filter Outside Grow Tent- GuideWarnings9075Views0 Carbon Filter Outside Grow Tent- GuideWarnings9075Views0 Perhaps your grow tent isn’t up to the task of housing a 16-pound carbon filter in the first place. However, you still want it to be there in order to filter out the foul odor. In this case, you’re considering installing the carbon filter outside the grow tent. Despite this, it may have certain unintended repercussions. However, it is still feasible to retain the carbon filter outside the tent and ventilate the air so that it does not smell.

Keep an eye out for more information.

Why Put The Carbon Filter Outside Tent?

First and first, this is not a suggested course of action in any way. First and foremost, you should keep your carbon filter (as well as your fan) inside the tent. However, if you find yourself in any of the following scenarios, you may need to reconsider your position-

Your grow tent size is too small

First and first, this is not a suggested course of action in any way shape or form whatsoever. The carbon filter (as well as the fan) should be kept inside the tent in the first place, if at all possible. However, if you find yourself in one of the following scenarios, you may need to reconsider your position—

Your tent might not be strong enough

First and foremost, this is not a suggested course of action. In the first instance, you should keep your carbon filter (as well as your fan) inside the tent. However, if you find yourself in any of the following scenarios, you may have to think differently-

You Don’t Want to Waste Grow Space

When the carbon filter is too heavy or too huge to be suspended from the grow tent roof, many of us may consider placing it on the floor of the grow tent instead. However, this takes up a significant amount of your growing area, which is at a premium. Another advantage is that it will bring warm air down to the plants, which is detrimental for a high harvest. The most ideal alternative to this design is to retain the fan within the tent and the carbon filter outside the tent, which is the most desirable solution.

See also:  How To Stake A Tent

Items You Need

  1. The carbon filter
  2. The inline fan
  3. The inline fan silencer (which is only applicable to setup 2)
  4. Kit for flanging ductwork. (In order to make airtight holes in the grow tent)
  5. The following tools are required: a box cutter or wire cutter (for cutting ducting)
  6. Duct clamps (for securing tight connections)
  7. And duct tape (for a more secure seal).

Setting up the Carbon Filter Outside Grow Tent

The following instructions will walk you through the process of installing a carbon filter outside your grow tent. But, before we get started, I believe you should recognize something really crucial! Carbon filters are most often the first step in the process of developing a grow room ventilation system. As a result, the air first passes through the filter, where it is cleansed of unpleasant compounds. Because it sucks air through it, a carbon filter is utilized as an exhaust filter in vehicles.

When you move the filter outside, it will no longer be able to pull air in the same manner. Instead, air is blasted into the filter, which then serves as an intake filter for the engine. With that assumption in mind, below are the two types of setups and the actions to complete them:

Setup Guide 1: Fan Inside- Filter Outside

It is recommended that we retain the fan and filter on the inside of the case in case 1. Your grow tent may not be robust or large enough to accommodate the filter in this situation, but a fan would suffice. Now, here are the steps to follow:

Step 1: Prepare the Carbon Filter

Take the filter out of the package and place the pre-filter onto it to complete the assembly. There should be elastic bands available for you to use in order to secure the positioning of the pre-filter. In many circumstances, gardeners choose to position the pre-filter in the same location as the inline fan intake port on their equipment. Think about what a pre-filter is supposed to perform, and you’ll see why this would make sense.

Step 2: Find The Suitable Place for The Filter

Remove the filter from its packaging and put the pre-filter onto it. In order to ensure the positioning of the pre-filter, there should be elastic bands available. Pre-filters and inline fan intake ports are frequently used together by growers to save space. Think about what a pre-filter is supposed to accomplish, and you’ll see what I mean.

Step 3: Cut Ducting at the Required Length

Given that you’ve placed the inline fan within the tent, you’ll need to connect it to the filter on the exterior of the structure. Measure the distance between the fan flange and the filter flange with precision. And then cut the ducting to the precise length you need it with a box cutter or wire cutter. With aduct flanging kit, you can be certain of accurate and leak-free functioning.

Step 4: Connect The Filter Flange with the Fan Flange

After that, connect the ducting to the fan’s tapered end and route it outside through a vent hole. Keep in mind that the vent hole and the inline fan should be on the same line. This will help to reduce the amount of airflow that is lost to the filter. To finish, use duct tape and duct clamps to secure the vent hole, the fan-ducting junction, and the filter-ducting joint together.

Setup Guide 2: Both Fan and Filter are Outside

Now, connect the ducting to the fan’s tapered end and route it outside via a vent hole in the ceiling. Make sure the vent opening and inline fan are on the same line as each other to avoid confusion. Thus, the amount of airflow that is lost to the filter will be reduced. To finish, use duct tape and duct clamps to secure the vent hole, the fan-ducting junction, and the filter-ducting joint.

Step 1: Place the Carbon Filter Ready

Remove the carbon filter from the previous setup and install it on the new location, just as you did in the first step. Make every effort to keep the filter as close to the tent as possible.

Step 2: Put the Fan on Top of the Filter

Because we’ll be keeping both the fan and the filter outside, we’ll need to make a fan-filter junction that’s both secure and airtight. Place the fan’s tapered end on top of the filter so that it is flush with the surface. Now, using 1-2 wraps of the aluminum foil duct tape, secure the junction. It’s possible that you won’t receive the duct tape along with the fan-filter combo. As a result, ensure that you have one before beginning the process. Despite the fact that it is standard practice, be certain that the fan and filter sizes are the same.

Step 3: Cut the Vent Hole and Ducting

The fact that we’ll be installing our fans and filters outdoors necessitates the construction of an airtight and secure fan-filter connection. Place the fan’s tapered end on top of the filter so that it can’t be seen. After that, use 1-2 wraps of the aluminum foil duct tape to seal the connection in place.

It is possible that you will not receive the duct tape with the fan-filter combination. As a result, make certain that you have one before beginning the process. Despite the fact that it is common knowledge, make certain that the fan and filter sizes are the same.

Step 4: Secure Connections

Duct foil tape and duct clamps should be used to secure all of the connections. The following connections should be located beneath the rudder: the vent-ducting junction, the ducting-fan joint, and the fan-filter joint. Problems-

  1. It is possible that the fan will not suck as much air from the outside as it might from the inside. When the fan is located outside, it will be incredibly difficult to reduce inline noise.

Consequences of Keeping The Filter Outside Tent

As we stated at the outset, placing the carbon filter outside is not a recommended mode of operation. It has a variety of disadvantages, especially if you’re concerned about carbon filter number one. At this stage, we’ll demonstrate the ramifications of your actions-

You’re Defeating The Purpose of the Pre-filter

The pre-purpose filter’s is to filter out large-sized dust and debris from the inside of the grow tent. Because you are preventing the filter from working, you are undermining its function. As a result, the dust and debris will be drawn straight into the fan’s airflow. This is a complete and utter no-no. Remedy: Place the pre-filter on the opening of the vent hole (in the case of a ‘fan-filter combo outside’), or on the opening of the inline fan (in the case of a ‘fan inside, filter outside’) to prevent the fan from turning on.

You Can Not Draw Air Through The Filter Anymore

Despite the claims of many manufacturers, carbon filters are not equally effective in drawing air in and out of a system from both directions. In this situation, we’re extending it outwards from the center. And this will result in a decrease in the effectiveness of the filter. Additionally, this inefficiency may have an impact on the predicted output from your growing space. Treatment:There is no effective treatment for this. You’re going to have to deal with the problem one way or another. However, placing an oscillating fan at the bottom of the structure may help to circulate the air and decrease the impact to some amount.

The Fan has to Work Harder

Irrespective of whether the fan is located inside or outside the tent, it must exert more effort in order to direct exhaust air into the filter. If there are a few of turns in the ducting, the job may become much more difficult. Solution: Purchase a fan that has at least 5-10 percent greater CFM than the one recommended by your grow system. Maintain the ducting’s length and straightness to the greatest extent practicable.

It Might Catch on A Fire

We can see from the preceding statement that the fan is subjected to a great amount of strain when the filter/fan-filter combination is located outside the building. An increase in pressure may induce overheating in the fan motor, which may result in a failure. In the worst-case scenario, it might even result in a fire. Solution:In this case, we strongly advise you to go for inline fans that are equipped with circuit breaker help. If the fan experiences any further stress or heat build-up, it will immediately shut down and turn off.

Safety Concerns

Is it OK to place the carbon filter outside the tent? It’s possible that you’ve received the answer along with detailed instructions. The following are some safety recommendations that you should bear in mind:

  • Electric fans with circuit breakers should be used
  • Ducting should be kept short and straight
  • Install a pre-filter at each point where air will come into contact with the ducting to filter it. Utilise an air-conditioning fan that delivers 5-10 percent more CFM than the grow system requires. Make sure you utilize an electric inline fan with a circuit breaker
  • Otherwise, the fan will not work.

I’m Saleh, and I’m a blogger that enjoys doing home improvement projects on the side.

Whatforme.com is my tiny corner of the internet where I can communicate what I’ve learnt first-hand, particularly in the field of home repair. The most recent posts by smsaleh (see all)

How to Set up a Carbon Filter in a Grow Tent or Grow Box

Salman Saleh, I’m a blogger who enjoys doing home improvement projects in his spare time. In whatforme.com, I’m able to express what I’ve learned via personal experience, particularly in the field of home repair. smsaleh’s most recent posts (see all)

  1. You should use a carbon filter that is appropriate for the size of your grow room. Connect your filter to the fan using aluminum ducting or another type of ducting. Duct clips are used to create an airtight connection between your fanfilter and your ductwork. YOYO hangers and other types of hanging equipment Duct tape is used to create a more secure seal. An extractor fan that is appropriate for your grow tent

Once you’ve gathered the materials, you’ll be able to set up your carbon filter in your groom room in five simple stages.

  1. Make sure your extractor fan is outside of the grow tent while not in use. Connect the ducting to your carbon filter and tighten the duct clamps to ensure a good connection. Mount your carbon filter to the roof bars of your grow tent using YOYO hangers to keep it in place. Distribute the ducting via one of the ventilation holes in your grow tent
  2. And Construct an extraction system by connecting the ducting to the extractor fan with duct clips.

You’ve completed your task! An example of a carbon filter installed within a grow tent may be seen below. There are several different ways to skin a cathang a filter, including: One often asked issue we receive here at GrowGenius.co.uk is whether the carbon filter / fan should be placed inside or outside the grow tent. The answer is easy — you can do both at the same time! Ensure that your extractor fan draws all of the air from your grow room out via your carbon filter. It doesn’t matter which direction your extractor fan is configured as long as all of the air is passing through the filter.

As a result, carbon filters and extractor fans might create a lot of noise at times.

  • You’re finished, all right? Within a grow tent, here’s an example of how to install a carbon filter. You may skin a cat in several different ways, including: When it comes to growing in a grow tent, one of the most often asked questions we get is whether the carbon filter and fan should be placed inside or outside the tent. Simply said, you can accomplish both at the same time. Ensure that your extractor fan draws all of the air from your grow room out via your carbon filter. It doesn’t matter which direction your extractor fan is configured as long as all of the air is passing through the charcoal filter is your primary concern. Tips for success: decrease noise and improve the fragrance! Carbon filters and extractor fans can produce a lot of noise at times
  • Here are some helpful guidelines to keep in mind while using these appliances:

How to Use Carbon Filters for Cannabis

Hands-down, it’s Nebula Haze. The easiest technique to manage the scent of your cannabis plants while they are growing is to use a carbon filter (learn more about different options for covering up cannabis growing smells). Whenever a carbon filter is properly placed as part of an exhaust system, it will not only prevent the smell of cannabis from escaping outdoors, but it will also prevent the scent from entering your house. It is possible that a carbon filter will be more successful than any other approach for suppressing odors, and it will not change the scent of your cannabis in any way.

  • A carbon filter is often formed like an enormous tube, and it weighs a significant amount of weight.
  • If any odors are present in the air, the carbon will neutralize them, and when the air is discharged out the back, it will be entirely odor-free.
  • The carbon filter on the left has a sleeve to help keep out excess dust, but the carbon filter on the right is “naked” so that you can see how air may travel through the sides of the carbon filter.
  • On Amazon.com, you may purchase a carbon filter.
  • This fan must be powerful enough to generate a vacuum in the grow space (with a grow tent, you will see the side of the tent leaning inwards).
  • It is not necessary to use a carbon filter if your suction is strong enough; you will not smell anything outside the tent even without one!
  • 2.) To keep odors from leaking outside the building As soon as you’ve established suction in the tent and have vented all of the stinky air outside, the following step is to “clean” any remaining odours from the air before it exits the house.

The following is the most frequent method of installing a carbon filter: Filter with Carbon a grow light an exhaust fan an outdoor This straightforward illustration illustrates how many growers set up their exhaust system.

On Amazon.com, you may purchase a carbon filter.

Once via the ducting, that air is forced to pass over the hot light, after which it is vented to the outdoors.

It is critical that the only method for air to enter the system is through the carbon filter, and that the air should be exhausted directly to the outside.

That’s all there is to it!

Learn how to set up your carbon filter with exhaust by following these step-by-step instructions.

Go to the next page. Top-Shelf Buds Can Be Grown With These 7 Tips Tutorial on How to Set Up Your Grow Lights – Step by Step Instructions Growing Weed in the Dark: How to Avoid Being Caught Growing Weed How to Get Marijuana Seeds in the United States (and Where to Find Them) (and around the world)

6 inch carbon filter for grow tent

Hands-down, it’s Nebula Haze Carbon filters are the most effective technique to keep the scent of your cannabis plants under control (learn more about different options for covering up cannabis growing smells). The use of a carbon filter in an exhaust system will not only keep the smell of cannabis from seeping outdoors, but it will also keep it from smelling up your home if the filter is placed appropriately. It is possible that a carbon filter will be more successful than any other approach for suppressing odors, and it will not change the scent of your cannabis at all.

  1. Typically, a carbon filter is in the shape of a huge tube, and they are quite heavy.
  2. If any odors are present in the air, the carbon will neutralize them, and when the air is expelled through the rear, it will be absolutely odorless.
  3. This process is often accomplished by using a very powerful exhaust fan.
  4. Setting up your exhaust system correctly is critical when utilizing a carbon filter; if you don’t do it correctly, your carbon filter will perform poorly, if at all.
  5. First and foremost, to keep odors from seeping into the grow room.
  6. All of the stinky air is being vented out of the tent at such a rapid pace that the suction prevents any of it from returning to your bedroom.
  7. How to install an efficient exhaust system is covered in this video tutorial.
See also:  Where Is The Best Place To Buy A Tent

What the carbon filter does is to help with this problem.

A carbon filter in action is seen in this illustration.

All odors are removed from air that is drawn into the carbon filter through the side walls.

Your exhaust system is completely sealed!

As a result of any leaks in the ducting or surrounding the grow light, stinky air might escape this way instead of going through the carbon filter first.

Using the information you’ve gained, you can design and install your own effective and efficient exhaust system to ensure that smells never escape again.

How to Avoid Being Caught Growing Weed (Stealth Growing) Learn how to obtain marijuana seeds in the United States, as well as where to look for them (and around the world)

How to install a carbon filter in a grow tent?

Submitted by Nebula HazeHands-down Using a carbon filter to manage the scent of your cannabis plants while they are growing is the most effective method (learn more about different options for covering up cannabis growing smells). The use of a carbon filter in an exhaust system will not only prevent the smell of cannabis from escaping outdoors, but it will also prevent it from smelling up your home if the filter is placed appropriately. A carbon filter can be more efficient than any other approach for suppressing odors, and it will not affect the scent of your cannabis.

  1. A carbon filter is often formed like a huge tube, and it weighs a lot.
  2. If any odors are present in the air, the carbon will neutralize them, and when the air is expelled through the rear, it will be entirely odor free.
  3. The carbon filter on the left includes a sleeve to help keep out excess dust, but the carbon filter on the right is “naked” so that you can see how air may travel through the sides.
  4. Purchase a Carbon Filter on Amazon.com!
  5. The exhaust fan must be powerful enough to generate a vacuum in the grow chamber (with a grow tent, you will see the side bending in).
  6. It is possible to avoid smelling anything outside the tent even without using a carbon filter if your suction is strong enough.
  7. 2.) To keep odors from seeping outside.

Fortunately, there is a carbon filter available to help.

a grow light an exhaust fan an outside space This straightforward schematic demonstrates how many growers set up their exhaust system.

Purchase a Carbon Filter on Amazon.com!

Once via the ducting, the air is forced to pass over the hot light, after which it is vented to the outside.

It is critical that the only method for air to enter the system is through the carbon filter, and that this air be exhausted directly outdoors.

That’s basically it!

Learn how to set up your carbon filter with exhaust in a step-by-step manner.

Go to the next section. Growing Top-Shelf Buds: 7 Proven Techniques Detailed Instructions on How to Set Up Your Grow Lights How to Grow Weed in Complete Secrecy: How to Avoid Being Caught! How (and where) to Purchase Marijuana Seeds in the United States (and around the world)

What Is A Carbon Filter and How Does It Work for Grow Room?

By Nebula HazeHands-down A carbon filter is the most effective method of controlling the scent of your cannabis plants while they are developing (learn more about different options for covering up cannabis growing smells). When properly fitted as part of an exhaust system, a carbon filter will not only prevent the smell of cannabis from seeping outside, but it will also prevent it from stinking up your home. A carbon filter can be more successful than any other approach for suppressing odors, and it will not change the scent of your cannabis.

  • A carbon filter is often formed like an enormous tube, and they are typically rather hefty.
  • When air goes through the carbon, it neutralizes any odors, and when the air is discharged out the rear, it is fully odor-free.
  • The carbon filter on the left has a sleeve to help keep out excess dust, while the carbon filter on the right is “naked” so that you can see how air may travel through the sides.
  • Purchase a Carbon Filter on Amazon.com!
  • The exhaust fan must be powerful enough to generate a vacuum in the grow chamber (with a grow tent, you’ll see the side bending in).
  • It is not necessary to use a carbon filter if your suction is strong enough; you will not smell anything outside the tent even without one.
  • 2.) To keep odors from leaking outside.

This is when the carbon filter comes into play!

This is an illustration of a carbon filter in action.

As air is drawn in via the sides of the carbon filter, it is cleaned of any odors.

There are no air leaks in your exhaust system!

If there are leaks in the ducting or surrounding the grow lamp, stinky air might escape this way rather than passing through the carbon filter first.

You now understand the fundamentals of how to set up your own functional and efficient exhaust system, ensuring that smells never escape again!

Go to the following page. 7 Tips for Growing Top-Rated Buds How to Set Up Your Grow Lights – A Step-by-Step Guide How to Grow Weed Without Being Detected How (and where) to Obtain Marijuana Seeds in the United States (and around the world)

What is a Carbon Filter for in Grow Room?

Before we go any further, let’s have a look at the functions of a carbon filter in a grow room. Management of Odors One of the most difficult things for a grower is to keep the odors from lingering. And this is especially true if you don’t want your neighbors to find out about your newfound “passion.” Fortunately, a carbon filter is capable of trapping all of the odor-causing particles in the air provided the air is introduced over the filter in the appropriate manner. In order to do this, exhaust fans must be installed to pull in air and pass it through a filter before being released into the environment.

  1. Impurities, such as airborne infections, can induce illnesses in plants and reduce the overall yield of the crop.
  2. In order to allow your plants to breathe freely, you must install a ventilation system in which all of the air is drawn through a carbon filter on a regular basis, as described above.
  3. Another advantage of carbon filters is that they are quite simple to put in place.
  4. All that is required is that you set it up at the proper height and attach it to the ducting using clamps.
  5. Installing a carbon filter and an inline fan system in your grow tent will help to alleviate both of these problems.
  6. As a result, an inline fan as well as a carbon filter are frequently required.
  7. It turns out that there are several different methods to set up a carbon filter and fan in your grow tent, based on your specific requirements.

All the stuff you will need

Take a moment to understand more about the functions of a carbon filter in a grow room before we go too far into things. The Control of Odor One of the most difficult things for a grower is to keep the odors from overpowering the entire operation. When you don’t want your neighbors to find out about your ‘passion,’ this is very important. The good news is that a carbon filter is capable of trapping all of the odorous particles in the air, provided that the air is introduced over the filter in the right manner.

  • Remove Impurities from the Environment Grow plants require clean, fresh air in addition to the proper temperature, humidity, and nutrition.
  • Because of its capacity to clean such contaminants out of the air, activated carbon is widely used.
  • Setup is simple and quick.
  • A carbon filter and fan combination, for example, can be quickly installed in the proper location.
  • It is common for undesirable smells and possible contamination issues to arise while growing plants inside, which can pose a threat to the health of both the grower and the plants.
  • Mold and mildew contamination concerns are normally resolved by maintaining a proactive and clean garden, however this is not always the case.
  • However, how can you verify that it is correctly configured to clean the air in the manner in which it is intended?

A carbon filter and a fan may be installed in your grow tent in a variety of ways according on your growing requirements. During this presentation, I will go over the most prevalent layouts and explain why one is preferable to the others.

HOW TO SET UP A CARBON FILTER IN A GROW TENT

MODEL 1: INSTALL BOTH FANFILTER WITHIN GROW TENTDIRECTIONS: Attach the filter to one side of the tent and attach the fan to the opposite side of the tent at the exhaust outlet. MODEL 2: INSTALL BOTH FANFILTER WITHIN GROW TENTDIRECTIONS: Conduit should be run from the filter to the fan and then from the fan to the exterior of the tent. Check to see that the fan is sucking air from the interior of the tent out to the outside. METHOD 2: INSTALL A FILTER AND A FAN INSIDE AND OUTSIDE OF THE GROW TENT.

  1. Install ducting from the filter to the fan outside the tent, passing it via the exhaust port.
  2. METHOD 3: INSTALLFAN INSIDEFILTER OUTSIDE GROW TENT OUTSIDE GROW TENT Follow these instructions to install your tent fan on the interior of your tent, near the exhaust outlet.
  3. Check to see that the fan is sucking air from the interior of the tent out to the outside.
  4. Connect the ducting from the inside of the grow tent to the exhaust port on the outside of the tent, where the fan is located.

How Does A Carbon Filter Work in A Grow Room

MODEL 1: INSTALL BOTH FANFILTER WITHIN GROW TENTDIRECTIONS: Attach the filter to one side of the tent and attach the fan to the opposite side of the tent at the exhaust outlet. MODEL 2: INSTALL BOTH FANFILTER WITHIN GROW TENT Conduit should be run from the filter to the fan, then from the fan to the tent’s outside. Check to see that the fan is sucking air from the interior of the tent out to the outside of the structure. THE SECOND METHOD IS TO INSTALL A GROW TENT WITH A FILTER INSIDE AND A FAN OUTSIDE.

Install ducting from the filter to the fan outside the tent, passing it through the exhaust opening.

THE THIRD METHOD: INSTALLFAN INSIDEFILTER EXTERNAL GROW TENT The fan should be mounted on the inside of your tent near the exhaust port, as shown in the illustration.

Check to see that the fan is sucking air from the interior of the tent out to the outside of the structure.

Distribute the exhaust ducting from the inside of the grow tent to the fan located outside of the grow tent. Make sure the fan is sucking air from the tent’s inside through the filter before turning it on.

Top tips – reduce noise and make it smell nicer!

As a result, carbon filters and extractor fans might create a lot of noise at times. Here are some helpful recommendations to keep in mind: Install your extractor against a wall to reduce vibration. Alternatively, you may place your extractor fan inside the grow tent next to the filtration system. Incorporate a sponge air freshener into your filter to provide a nice scent throughout your grow space. Upgrade to acoustic ducting in order to reduce vibrational noise.

Installing your Carbon Filter

Carbon filters and extractor fans can produce a lot of noise at times; here are some helpful guidelines to keep in mind while using these appliances: To reduce vibration, mount your extractor against a wall. If you want, you may place your extractor fan inside the grow tent next to the filter instead. Incorporate a sponge air freshener into your filter to provide a nice scent around your grow space Reduce vibrations by upgrading to acoustic ducting.

Still Need Help?

In the event that you have more questions or want extra assistance, please file a case with one of our Grow Strong Support Technicians and we will get back to you within 24 hours! Here is how to get in touch with support.

How To Use Carbon Filters In Your Cannabis Grow Room – RQS Blog

In the event that you have more questions or want extra assistance, please start a case with one of our Grow Strong Support Technicians and we will get back to you within 24 hours. Getting in Touch With Support

What are Carbon Filters?

If you have any more questions or want additional assistance, please start a case with one of our Grow Strong Support Technicians and we will get back to you within 24 hours! Please Contact Us Here.

How Carbon Filters Work

Growing tents contain high concentrations of terpenes, which may be cleaned using carbon filters, which work on the concept of adsorption (the adherence of molecules to a surface). Because activated carbon has a significantly increased surface area, it is the ideal component for this application. To put things in perspective, a single gram of active carbon has a surface area of 3,000 square meters! Creating a vacuum in the grow environment is essential for ensuring that terpenes are able to flow through the filter.

Adequate suction will drive all of the terpene-rich air through the filter, preventing any of it from escaping via the edges of the grow tent’s venting system.

Growers can guide odourless air out of a nearby window or ventilation shaft by connecting ducting to the exhaust fan’s external output on the outside of the building.

Where to Put a Carbon Filter in a Grow Room

A grow tent’s carbon filters are normally suspended slightly below the ceiling’s level. To ensure that they are correctly positioned, follow the steps below:

  • When used in a grow tent, carbon filters are often suspended just below the ceiling height of the tent. To ensure that they are exactly aligned, follow the steps below.

How to Build Your Own Carbon Filter

A grow tent’s carbon filters are often suspended slightly below the ceiling of the tent.

To ensure that they are exactly aligned, perform the steps below:

Materials

All of the supplies you’ll need to create your own carbon filter can be found in one trip to the local hardware store and a quick glance around your home, which makes it a reasonably simple project to do. As you travel, cross the following tasks off your to-do list: A roll of aluminum screen or chicken wire is a good starting point. The following items are required: B) A PVC cleanout cap and a PVC adapter with the same diameter; C) A dryer vent hose; D) A roll of duct tape. E) The importance of quilt batting F) The use of a laundry basket (preferably one with a lid) G) The use of activated carbon

Step-by-step Guide

Now that you have all of your supplies, arrange them on a big, clean work surface so that you can begin building. Make your own functional carbon filters out of these discarded parts and pieces by following the methods outlined in this guide.

  1. Place all of your supplies on a big, clean work surface so that you can begin building right away. Create functional carbon filters out of these miscellaneous scraps and pieces by following the instructions outlined in the next section.

When Should You Change a Carbon Filter?

Place all of your supplies on a big, clean work surface to begin building as soon as you have them all. Make your own functional carbon filters out of these discarded parts and pieces by following the instructions outlined below.

Grow Tent Fans – Sizes, Placement, Setup, FAQ (Updated 2022)

It is critical to have adequate circulation in your grow tent if you want to avoid mold and powdery mildew from forming on your cannabis. Throughout this article, I’ll cover all you need to know about choosing an inline fan for your grow tent and how to correctly install and configure it as well. How to choose the right grow tent fan size and power rating, where to install the fan, how to set up your grow tent fan, and what additional accessories you’ll need are all things I’ll assist you with.

Selecting the proper grow tent fan size and power:

It is critical to have adequate circulation in your grow tent if you want to avoid mold and powdery mildew from forming on your marijuana. Throughout this article, I’ll cover all you need to know about choosing an inline fan for your grow tent and how to correctly install one. How to choose the right grow tent fan size and power rating, where to install the fan, how to set up your grow tent fan, and what additional accessories you’ll need are all things I’ll help you with.

See also:  What Do I Need For My Grow Tent

The proper size fan for a 4×4 grow tent:

Let me give you an example of how to calculate the area of a 4×4 grow tent, which is a fairly typical size among indoor growers: The majority of 4×4 tents have dimensions of 48 in x 48 in x 80 in. As a result, the total volume of air in a 4×4 grow tent is 4ft (length) x 4ft (width) x 6.667ft (height) = 106.67 cubic feet (4ft (length) x 6.667ft (height). However, this does not imply that you require a 106 cfm fan. When you consider that a carbon filter will lower your fan efficiency by 25 percent, and that one 90 degree duct bend would reduce your fan efficiency by another 30 percent, a fan that produces 215cfm will produce 112cfm (200cfm x 0.7 x 0.75).

What size fan is needed for other grow tent sizes?

To illustrate this, consider the following estimate for a 4×4 grow tent, which is a fairly popular size among indoor growers: The majority of 4×4 tents are 48 inches by 48 inches by 80 inches in size. As a result, the total volume of air in a 4×4 grow tent is 4ft (length) x 4ft (width) x 6.667ft (height) = 106.67 cubic feet (length x width x height x height). Although you may require a fan with a flow rate of 106.5 cubic feet per minute, this is not necessary. With a carbon filter decreasing your fan efficiency by 25% and a 90 degree duct bend decreasing your fan efficiency by 30%, a 215cfm fan will be reduced to a 112 cfm fan when you consider the following: (200cfm x 0.7 x 0.75).

A grow tent fan (inline fan) rated for 215cfm would be sufficient for a 4×4 grow tent with an area of around 106 cubic feet.

Grow tent fan placement:

Depending on where you want your grow tent fan to be, you have two alternatives. It is possible to work either inside or outside the grow tent. What’s the difference between the two? If you pick outdoors, the fan will draw air from the interior of your tent to the outside through a duct located on the top corner of your tent, allowing you to be more comfortable. You’ll want the fan and filter (if you’re using one) hanging near the top portion of the tent, where the warmest air will naturally travel to keep it cool inside.

Hangers are not often included with fans, so double-check that you have them.

If you decide to place the fan outside, you’ll need to figure out how to get it to rest in a comfortable position.

Because of the fan’s ability to produce a low pressure condition within the tent, when air is blasted out, new air is naturally drawn into the tent.

Grow tent fan setup:

Yes, the diameters of your inline fan and duct will need to be the same at the place where they connect.

Passive or Active Air Flow For Your Grow Tent?

The sorts of fan sets you may utilize in your grow tent or growing room are passive and active. Passive fans are the most common. The difference is whether you want air to passively re-enter your grow tent or if you want it to aggressively re-enter your grow tent. Passive grow tent air circulation relies on a single inline fan to evacuate hot air from your grow room, reducing the need for additional fans. When air is forced out of your enclosed grow area, the pressure in the room drops to a negative pressure, which means that air from outside the tent or room should naturally be drawn in via any openings to replace the air that has been forced out of the space.

  • If you want to guarantee that the air returning to the tent is being filtered, or if the air returning to the tent is not returning rapidly enough, active grow tent air replacement is the best option for you.
  • Simply ensure that you have the right size ducting (which should be the same diameter as your fan), duct clamps, hangers for hanging, and zip ties before beginning (make sure zip ties are long enough to go around the diameter of your carbon filter).
  • To install the filter, just attach ducting to the side of your fan that is responsible for sucking in air.
  • Clamps should be used on both sides (usually provided).

If you’re using an active air flow configuration, I’d recommend operating both fans at the same speed to ensure that the quantity of air escaping the grow tent equals the amount of air returning to the grow tent.

How to install a grow tent fancarbon filter inside your tent:

If you have a grow tent or growing room, you may employ one of two sorts of fan setups: passive or active. If you want air to re-enter your grow tent passively or actively, the difference is that you want it to do so automatically. One inline fan is all that is required for passive grow tent air circulation, which exhausts the heated air from your grow room as quickly as possible. When air is forced out of your enclosed grow area, the pressure in the room drops to a negative pressure, which means that air from outside the tent or room should naturally be drawn in via any openings to replace the air that has been forced out by the removal of oxygen.

  1. If you want to guarantee that the air returning to the tent is being filtered, or if the air returning to the tent is not returning rapidly enough, active grow tent air replacement is the best option for you.
  2. Simply ensure that you have the right size ducting (which should be the same diameter as your fan), duct clamps, hangers for hanging, and zip ties on hand before beginning (make sure zip ties are long enough to go around the diameter of your carbon filter).
  3. However, I strongly advise using one.
  4. Connect the opposite end of that duct to the filter.
  5. Make use of a clamp to hold both sides together (usually provided).
  6. It is recommended that if you are using an active air flow configuration, you operate both fans at the same speed to ensure that the amount of air leaving and entering the grow tent is equal.

Other Inline Fan Installation Notes:

The setup is straightforward; it took me no more than 30 minutes to complete my AC Infinity T4 installation. The most efficient design would be to route the duct out a window so that the hot air from your tent does not just blow into the room where your tent is placed, where it would be sucked back in and render the entire operation ineffective. Not everyone has the benefit of having a window in close proximity to their camping site. In that case, if you’re compelled to blow tent air into the same room where the tent is placed, I highly recommend investing in a portable air conditioner to re-cool the air before sucking it back into the tent through the bottom tent windows.

Does It Matter What Carbon Filter I Choose For My Grow Tent Fan?

When selecting a carbon filter for your grow tent fan, the one thing you want to be certain of is that the diameter of the connection point on the fan and the filter are the same. Make certain that your inline fan is equipped with a four inch carbon filter if your fan is four inches in diameter.

Apart from that, there isn’t much of a difference between carbon filters; they’re simply large metal canisters that filter your air through charcoal to remove impurities and odors from it.

Do I Need an Oscillating Fan in Addition to my Inline Fan?

You should make certain that the diameter of the connection point on your grow tent fan and the diameter of your carbon filter are same when selecting a carbon filter for your grow tent fan. Make certain that your inline fan is equipped with a four-inch carbon filter if your fan is four inches in diameter. Aside from that, there isn’t much of a difference between carbon filters; they’re essentially large metal canisters that filter your air via charcoal to eliminate impurities and odors from the air.

Which Grow Tent Fans I Recommend:

As long as you’re willing to purchase the ducts and hangers separately from the fans, AC Infinity offers fantastic grow tent fans. Purchasing the ducts and hangers is simple – simply match the duct diameter to the fan diameter. What is it about the AC Infinity fans that makes them so much superior than the competition? This fan is equipped with a programmable controller, which allows the fan to switch on in response to a range of different scenarios. For example, you may program the fan to turn on when the humidity reaches a given threshold.

  1. You may also set a timer and receive alarm notifications.
  2. When my AC Infinity T4 was running at maximum power, I was pleasantly pleased at how quiet it was.
  3. This results in the fan motors being loud.
  4. Quiet Inline Duct Fans With Temperature and Humidity Control – CLOUDLINE SERIES Them fans are priced similarly to other fans without the technological characteristics, therefore it makes financial sense to purchase one of these instead of another fan.
  5. Click here to see whether they are available on Amazon.

VivoHome Inline Fan Kit

As long as you’re willing to purchase the ducts and hangers separately from the fans, AC Infinity manufactures fantastic grow tent fans. Purchasing the ducts and hangers is simple – simply match the duct diameter to the diameter of your fan. When compared to other fans, why are the AC Infinity fans so much better? This fan is equipped with a programmable controller, which allows it to switch on and off depending on the situation. When the humidity level reaches a specified threshold, you may program the fan to switch on.

  • A timer and alarm warnings can also be set up for use.
  • The AC Infinity T4 shocked me with how quiet it was even while running at full power.
  • A completely alternative approach was developed by AC Infinity, one that is both more efficient and quieter in operation.
  • This type of fan is priced comparable to other fans without the technological characteristics, therefore it makes sense to choose one of them rather than another type.

Fan sizes range from 4 inches to 8 inches in diameter, with airflow rates of 205cfm, 351cfm, and 750cfm. You may find them on Amazon by clicking here.

Secret Jardin Clip On Monkey Fan for Grow Tents:

Secret Jardin created this 6-inch clip-on oscillating fan with a grow tent owner in mind when they created this product. The clip is designed to attach securely on the support poles of grow tents. The fan will ensure that your grow tent has adequate air circulation, which is necessary to avoid the growth of mold and powdery mildew. I’d recommend using one of these oscillating clip fans in conjunction with an inline fan in order to maintain the ideal growth environment in your grow tent.

Keeping Your Grow Tent Cool

When it comes to keeping your grow tent temps under control, you may want more than simply an inline fan. My best recommendation, without requiring you to read the entire post, is to consider purchasing a portable air conditioner for the room in which your tent is placed, or to consider adding CO2 to your growing environment, which allows you to grow a few degrees hotter than usual. See my whole post on decreasing grow tent temps for more information.

Ideal Grow Tent Temperature and Humidity for Growing Cannabis:

When it comes to keeping your grow tent temperatures under control, an inline fan is not always enough. Rather than having you read the entire text, my best recommendation is to think about investing in a portable air conditioner for the room in which your tent is located, or adding CO2 to the mix, which allows you to grow a few degrees hotter than usual. For more information on decreasing grow tent temps, please see my whole article.

Other Resources for Growing Cannabis Indoors:

I developed numerous useful lists and tips to assist you in completing your home improvement project the right way, in addition to determining the proper fan size for your needs. The following are some other articles I strongly recommend: Choosing the Proper Size Grow Tent, This Year’s Best LED Grow Light List, and Understanding Grow Light PAR PPFD and Wattage, among others. Last but not least, don’t forget to check out myhome page for a comprehensive collection of useful resources.

Grow Tent FanCarbon Filter FAQ:

I developed various useful lists and tips to assist you in completing your home improvement project the proper way, in addition to determining the appropriate fan size for your needs. Picking the Proper Size Grow Tent, This Year’s Best LED Growing Lights List, and Understanding the Differences Between PAR PPFD and Wattage are some of the other articles I strongly recommend. Last but not least, don’t forget to check out myhome page for a comprehensive collection of useful resources!

What should I do if there isn’t a CFM output for my exact grow tent size?

The AC Infinity fans feature a number of different speed settings to choose from. As a result, if you just want 100cfm, you may get the 205cfm (smallest model) and utilize the middle of the ten available speed settings.

If I’m buying parts separately, how do I know if they’ll all fit together?

The diameter of all of these components is the same. If you purchase a 6′′ fan, be sure you also purchase 6′′ ducting and a 6′′ filter to complete the installation. That’s all there is to it, really.

Do I need to hang the carbon filter?

The carbon filter should be placed at the top of your tent in order to capture the warmest air because it is where air will reach your fan from the outside.

It would be inefficient to hang the filter low or to place it on the floor, for example.

Which end of the grow tent fan do I connect the carbon filter?

The carbon filter should be placed at the top of your tent in order to capture the warmest air because it is where air will enter your fan from the top. It would be inefficient to hang the filter low or to put it on the floor.

What size fan will fit in my grow tent?

Most grow tents accommodate 8-inch ducting, while some may only accommodate 6-inch ducting.

What if the size of my duct is too big for the duct hole on my grow tent?

If your grow tent outlet is 6 inches in diameter and your ducting is 8 inches in diameter, you’ll need to purchase a ducting reducer.

There’s too much negative pressure in my grow tent

Alternately, reduce the speed of your fan and, if possible, open up the passive air intake windows on the bottom of your tent even more, or consider installing an active air intake fan, which works in the same way as your other fan but is mounted on the bottom of your grow tent and pushes air into the growing chamber.

Can you wash or clean carbon filters after extended use?

Reduce the speed of your fan, open up the passive air intake windows on the bottom of your tent as much as possible if possible, or consider installing an active air intake fan, which is the same as your other fan but is mounted on the bottom of your grow tent and pushes air inwards instead of outwards.

Can you place a carbon filter on each side of your fan?

Yes, although it may result in a slight reduction in the power efficiency of your fan. Check to see if your fan is strong enough to manage the additional carbon filter load.

Do all carbon filters come with pre-filter wrap for the exterior of the canister?

Pre-filter wrap is not included with all carbon filters; thus, if you want a pre-filter included, be sure to check the product page specifics before purchasing.

What’s the largest outer dimension of my carbon filter?

Increase the output size by approximately 2 inches. On a 4 inch carbon filter, the canister diameter would be approximately 6 inches in diameter.

How long do carbon filters last?

To make the outlet larger, subtract 2 inches from the length. If you have a 4 inch carbon filter, the canister diameter will be around 6 inches in diameter.

Do I need inline and oscillating fans in my grow tent?

Inline and oscillating fans serve various functions in the grow tent, so it’s a good idea to use both if you have the option.

Leave a Comment

Your email address will not be published. Required fields are marked *