How To Seam Seal A Tent

How to Waterproof and Seam Seal a Tent

The feeling of being snug inside your tent, listening to the crickets and cicadas sing you to sleep, is second to none—that is, until you wake up soaking wet from a leak that had gone undetected for several hours. It’s critical to waterproof and seam seal your tent to ensure that you don’t wake up in a puddle or that your camping gear isn’t ruined on your next camping excursions. When tenting in the great outdoors, there are four primary categories of challenges that tent dwellers are likely to encounter:

  • While lying in your tent, listening to the crickets and cicadas sing you to sleep, there’s nothing better than waking up a few hours later to find yourself dripping wet due to an earlier-than-expected leak. Waterproofing and seam sealing your tent is essential for greater protection on your future camping trips, so that you don’t wake up in a puddle or damage your equipment. Generally speaking, tent dwellers confront four categories of challenges while they are out in the open:

It doesn’t matter what kind of tent you have or what kind of leak-proofing you require; Stuff AID will assist you in keeping your gear watertight and you dry. Whether you’re camping in Yosemite or pitching up a tent in your own garden, you should prevent leaks from occurring in the first instance. Find out how to make quick and easy repairs to your tents and tarps that will last for years, so you can confidently return to sleeping quietly in the great outdoors. A puddle is hardly a place you’d like to sleep—so if you discover a bothersome loose or damaged seam in your tent, fix it as soon as you possibly can.

The most important step in completing this do-it-yourself job successfully is to choose the proper sealant for your type of fabric as well as the location and size of the treatment area.

  • A bowl of cold water
  • A sponge that is not rough
  • Revivex Pro Cleaner or light liquid soap
  • Seam Grip WP, Seam Grip FC, or Seam Grip SILWaterproof Sealant
  • Revivex Pro Cleaner or mild liquid soap

Time Estimated: Approximately 30 minutes 20 minutes are allotted for application. Duration of cure: 2–12 hours, depending on the sealant used. Steps:

  1. Set up your tent in the garage or backyard if you have one. The rainfly should be laid down flat with the underside facing up while it is being sealed. Combine 1 fluid ounce of Revivex Pro Cleaner in a basin of cold water
  2. Set aside. Preparation: Wipe down the seams you intend to seal with a moist cloth or sponge saturated with your solution
  3. Then, using the provided brush, apply a thin coating to the exterior seams of the house using the appropriate Seam Gripseam sealer. In order to seal a silnylon tent or tarp (see the chart below for reference), use a silicone-based sealer. Maintain level and allow to cure according to the directions on the container (about 2-8 hours)

Pro Tip: After the Seam Grip WP has been cured, sprinkle baby powder over the seams to keep them from sticking together. Even while a rainfly is intended to provide an additional layer of protection between your sleeping bag and Mother Nature, they can become prone to wear and tear over time as well. Fortunately, with a combination of Seam Grip and Revivex, sealing nylon from top to bottom is a straightforward process. You may now sleep easily in your entirely secure and dry tent once you’ve finished sealing any loose seams using Revivex Instant, a spray-on water repellent, and completing the reproofing procedure.

  • A bowl of cold water
  • A sponge that is not rough
  • Revivex Pro Cleaner or mild liquid soap
  • Revivex Instant Water Repellent
  • Revivex Pro Cleaner or light liquid soap

10-15 minutes is the time estimate. Steps:

  1. Lay your rainfly flat on the ground with the top side facing up in a well-ventilated place. Pour 0.5 fl oz of Pro Cleaner into a basin of cold water and stir well. Wet your sponge with the solution and use it to clean the rainfly from top to bottom. After the cloth has been thoroughly cleaned, spray it with Revex Instant Water Repellent. Make certain that the cloth is totally dry before storing it to avoid the formation of mold or mildew.

Water does not necessarily enter your tent at the top; it can also enter through the bottom of your tent and seep up through the floor. It’s a circumstance that will undoubtedly cause you to awaken from your lovely slumber fast (and painfully). Use Seam Grip TF to repair the polyurethane (PU) protective coating on the bottom of your tent to prevent water from seeping up through the bottom of your tent.

  • Isopropyl alcohol, Revivex Pro Cleaner or mild liquid detergent, Seam Grip TF Tent Fabric Sealant, and a dry brush are all recommended.

Time Estimated: Approximately 30 minutes 15 to 30 minutes for application Cure time is 8-12 hours. Steps:

  1. Timing is estimated to take 30 minutes. 15-30 minutes for preparation 8-12 hours to cure Steps:

When the factory PU coating starts to peel and flake off, it’s time to replace it, according to our experts.

It may also grow sticky or emit a terrible stench as time passes.

How to Waterproof a Tent

The product has had 274 reviews, with an average rating of 4.4 out of 5 stars The sound of water trickling into your tent is one of the sounds of nature you don’t want to hear while you’re camping in the outdoors. If you’ve been through it, it’s time to reinforce the waterproofing of your shelter’s foundation. There are three different methods for waterproofing your tent:

  • Seal the seams: Using a seam sealant can help prevent moisture from leaking through the seams. The urethane coating on the interior of your rainfly and the floor of your tent are the principal barriers against moisture
  • Thus, it is important to keep them in good condition. Refresh the DWR: A durable water repellent (DWR) coating helps your rainfly drain water
  • Nevertheless, it can become brittle with time.

Video: How to Waterproof a Tent

A lot of tents are sold with seams that are sealed, but the sealant can wear out with time, allowing water to seep through the seams. If you discover a leaking seam, you’ll need the following supplies:

  • A rag, rubbing alcohol, seam sealant (be sure you acquire the proper type for your tent), and a pair of scissors are all needed. Cloth that has been silicone treated requires a different sealer than fabric that has been polyurethane coated. However, if you’re not sure what sort of fabric your tent is made of, you should check with the tent manufacturer.)
  • The majority of tents are made of polyurethane-coated textiles, but if you’re not sure, check with the tent manufacturer. Optional: a drop cloth to collect spillage

The following are the steps to seal seams:

  1. To seal seams, follow the steps outlined below.

Refreshing the Urethane Coating on a Tent

How to seal seams is as follows:

  • The following items are required: a sponge with an abrasive side
  • Rubbing alcohol
  • Tightening agent (again, be certain to use the correct type for your tent). Cloth that has been silicone treated requires a different sealer than fabric that has been polyurethane coated. However, if you’re not sure what sort of fabric your tent is made of, you should check with the tent manufacturer.)
  • The majority of tents are made of polyurethane-coated textiles, but if you’re not sure, check with the tent manufacturer.

The following is the procedure for applying tent sealant:

  1. Using the tent sealant is simple: follow these steps.

Refreshing the DWR on a Tent

If the rain is no longer beading up on your fly, you may reapply the durable water resistant (DWR) coating. Here’s everything you’ll need to get started:

  • A water-repellent substance that may be sprayed on
  • Water
  • A clean, moist cloth
  • A clean, damp cloth

The following is the procedure for applying the waterproof spray:

  1. Assemble the tent and clean the rainfly (if you just washed your tent, you don’t need to wait for it to dry before adding a fresh DWR coating)
  2. Spray the outside of the rainfly with the waterproofing spray, ensuring that it is uniformly coated. After a couple of minutes, use a moist towel and wipe away any extra coating that has accumulated. Prior to packing up the tent, allow it to thoroughly dry out.

Set up the tent and spray down the rainfly with clean water (if you have just washed your tent, you do not need to wait for it to dry before adding a fresh DWR coating); Spray the rainfly’s exterior with the waterproofing spray, being sure to cover it completely. After a couple of minutes, use a moist towel and wipe away any extra coating that may have formed. Prior to storing the tent, allow it to dry fully;

Related Articles

  • Tent Care Fundamentals
  • How to Repair a Tent
  • How to Set Up a Tent
  • Tent Maintenance

Contributing Experts

Chris Pottinger works at REI Co-op in Kent, Washington, as a senior tent designer.

Tent Seam Sealers 101

It is a type of application (usually tape or glue) that is used to seal the leaky seams of a tent to prevent water from leaking in. When the tent fabric is sewn together along the wall and the floor, this is known as a tent seam. These seams are infamous for leaking when there is a lot of rain, dew, or water runoff, among other things. In a tent, water will leak in via stitching that has either 1) not been properly sealed in the first place or 2) has become worn out over time. During the production process, the majority of firms waterproof the seams.

Step 1: Make Sure You Need Seam Sealant

If there is no tape on the seams, or if the tape is coming off, you should consider sealing the seams with an additional layer of sealant to ensure that they are completely watertight. TAPING THE SEAMS:Taping the seams is a typical practice in the construction of most retail tents. It is a thin, flexible tape that acts as a physical barrier between the user and the rain. Because most tents have their seams taped during the production process, you shouldn’t have to worry about tape sealing them immediately out of the box when they arrive.

Tents that have been correctly taped will have a layer of transparent tape incorporated into all of the seams, including those around the walls as well as along the floor of the tent.

B) SEAM Sealer: A waterproof substance, such as glue or goo, that permeates into the tent fabric and repels water is used as a seam sealant.

It sticks to a seam and produces a water-resistant barrier around the seam. It is physically brushed onto a seam in order to guarantee that it penetrates the holes created by the sewing process.

Step 2: Select Sealant Based on Tent Fabric

Different types of seam sealants are required for different types of tent materials and textiles. As a result, you must identify the sort of tent cloth that you have. If you are unsure of the material of your tent or tarp, you can always look it up on the manufacturer’s website or get in touch with them. A) SILICONE COATED Textiles: Silicone coated fabrics are frequently used in ultralight tents and tarps. As previously stated, silicone-based sealants are required to be used on these textiles since silicone is the only substance that will cling to the silicone in these fabrics.

To make your own DIY silicone sealer, use one part 100 percent pure silicone with one part mineral spirits in a one to one ratio.

B) POLYURETHANE COATED FABRICS: Polyurethane coated tent fabrics, like silicone tents, can only be treated with a urethane-based sealer, similar to the silicone tents.

The best urethane sealants are as follows:

  • Gear Aid Seam Grip FC (Flexible Gear Aid Seam Grip FC) (formerly Seam Sure). Seam Grip FC is a water-based sealant that dries in as little as two hours and is ideal for use in tight spaces. Gear Aid Seam Grip FC is suggested above Gear Aid Seam Grip WP unless you want a thick coating of waterproofing. This is because it is easier to work with than Seam Grip WP. Gear Aid Seam Grip WP is a water-based product that penetrates into the fabric of the tent and is easy to clean (formerly Seam Grip). Unlike other urethanes, Seam Grip WP is a thermoset compound that goes on thicker and requires longer to cure. It’s so thick that you can use WP as a glue to hold things together. Because it is so thick, Seam Grip WP necessitates the application of more elbow grease in order to fully penetrate the fabric.

Gear Aid Seam Grip FC (Flexible Gear Aid Seam Grip FC) – (formerly Seam Sure). In as little as two hours, Seam Grip FC can be dry. It is a water-based sealer that cures quickly. Gear Aid Seam Grip FC is preferred over Gear Aid Seam Grip WP unless you want a thick coating of waterproofing. This is because it is easier to work with than Seam Grip WP. Gear Aid Seam Grip WP is a water-based product that penetrates into the fabric of the tent and is simple to clean (formerly Seam Grip). In comparison to other urethane formulas, Seam Grip WP has a thicker consistency and requires more time to dry.

It takes a little more effort to work Seam Grip WP into the fabric because it is so thick; nevertheless, this is to be expected with a product of this thickness.

Step 3: Apply the Seam Sealer

A few simple items, an hour of your time, and a few days of drying time are all that are required to repair a leaky tent. PREP: Look for a day with low humidity and temperatures ranging from 50 to 70 degrees (F), so that it can dry quickly. Make certain that you cover every seam and that you seal the seams from both the inside and the exterior. The tent must be set up in the manner in which it would typically be used for this purpose. MATERIALS: Before you begin, you’ll need to gather the materials listed below.

  • A few simple items, an hour of your time, and a few days to dry are all that are required to repair a leaking tent. Look for a day with low humidity and temperatures between 50 and 70 degrees (F), so that it can dry quickly. Make certain that you cover every seam and that you seal the seams on BOTH the inside and the exterior. Many times this means assembling the tent in the manner in which it would be used ordinarily. MATERIALS: Before you begin, you’ll require the following materials.

HOW TO APPLY: 1. Set up a tent in your yard. In order for you to see all of the seams on your tent, set it up outside in a dry, sunny area or in a brilliantly lighted room. Put the fly on from the inside out so that the seams are visible. 2. Remove any sealant tape that has been damaged. Check for any loose or broken tape that may have come loose during the process. Try to keep the pieces that haven’t been harmed intact while gently removing those components. 3. Seams that are free of debris.

  • Using a damp cloth and rubbing alcohol, clean it well.
  • 4.
  • Utilizing your brush, dip it into the sealant mixture and apply it to the inside seams of your home or business.
  • Excess should be wiped away as needed.
  • Some individuals choose to cover zippers and other sensitive places using painter’s tape rather than using a glue stick.
  • Seal the outside seams with a sealant.
  • 6.
  • Allow for 12 to 24 hours of air drying time for the tent.

Even after 24 hours, talcum powder can be placed on the seams to keep them from becoming sticky again. 7. (Optional) Spray it with water to finish it off. Spray your tent with a garden hose and inspect it for leaks to ensure that your task is done correctly.

More: Waterproofing Tent Tips

  • Prevention of Leaks: If rain does not bead up on the walls of your tent, you should consider coating it with a fresh coat of long-lasting, water repellent (DWR). This coating is excellent for treating the tent’s outside as well as the rainfly’s exterior. As a waxy covering, it prevents water from being absorbed through the walls of the building. Preventing Seaping Using the Following Methods: Make use of a groundsheet (tent footprint) below your tent to prevent it from gathering water runoff and moisture from the soil. In order to avoid holes, choose your tent location intelligently and sweep away any pebbles or sticks to avoid coming into touch with any potentially abrasive surfaces. In the case of minor holes, tenacious tape may be used to repair them. It is a highly strong tape that is meant to be lightweight, flexible, and robust so that it can be used outdoors.
See also:  How To Cool A Tent Without Electricity

Tents 101: Seam Taping vs. Seam Sealing

It’s never pleasure dealing with leaking seams, especially when it’s raining in the middle of the afternoon. However, the seams of a tent are also its most vulnerable area when it comes to stray and persistent water. Manufacturers of tents have three alternatives for preventing infiltration: using seam tape, using seam sealing, or building a robust seam construction from the ground up. Because you’re reading this, it’s likely that you’re inquisitive about the differences between these two options.

  1. Let’s get started.
  2. Seam tape does exactly what it says on the package.
  3. The tape has the effect of a dam.
  4. Tent manufactures are normally certified to use seam tape in their products.
  5. When used in tents, the approach is same, but the manner in which it is implemented differs.
  6. What exactly is seam sealing?
  7. The tents, such as some MSR tents, are seam sealed from the factory, whereas others are not.

If the remainder of your tent is still in excellent condition, seam sealing is a fantastic option to keep it in good condition rather than having to purchase a new tent.

When the sealant is put on, it seeps into the stitching holes and forms a watertight barrier around the area.

Let’s start with a question: Have you ever had a tent with flaking seams that you didn’t like?

Some applications benefit greatly from the use of seam tape, whilst others do not.

This is due to the fact that the tape sticks to certain textiles extremely effectively, providing long-term protection.

When used on thinner tent materials, the tape simply fades more quickly.

Depending on how well you take care of your tent, this might take several years, or it could happen rather rapidly if you don’t.

Furthermore, once the tape is removed, your seams are rendered unprotected.

In the presence of moisture, heat, and humidity for an extended period of time, seam tape can begin to break down and flake away from lightweight tent fabrics.

However, as tent materials have become lighter in weight, we have discovered that even the finest seam tape does not match our requirements for long-term performance.

The introduction of our new Xtreme Shield waterproof covering, which includes precision-stitched, factory-sealed seams, is something we’re delighted to announce for 2019.

Is it necessary to seam seal my tent?

In addition to providing a waterproof barrier, seam sealing will also help to increase the life of your tent.

As in the case of MSR’s Hubbaseries, if your seams are sewn and factory sealed, but wear has exposed regions to leaks over time, seam sealing is significantly easier to do.

Apply the sealer on the fabric’s underside/inside (or glossy side) using a sponge or a brush.

We’re gearheads, and we’ve put the various seam sealants on the market to the test.

ChooseSeam Grip +WP if you want the most explosive one.

It does need a small amount of work and a lengthier drying time than other options.

Sometimes simply caulking the areas where you’ve detected drips is enough to prevent further damage.

However, a little tender loving care may go a long way toward preserving its quality. Now, enough with the technical jargon. We believe that this technology can be used in tents and should be used in tents! Posts related to this one:

  • Tent Fabrics Part 1: Fabric Specs
  • Tent Fabrics Part 2: Waterproof Ratings
  • The Ultimate Guide to MSR Tents
  • Tent Fabrics Part 3: Waterproof Ratings
  • Tent Fabrics Part 4: Waterproof Ratings

How to Seam Seal a Tent or Tarp

The date is August 24, 2021. Frequently Asked Questions are included below. Tent or tarp seam sealing is a simple process. When purchasing a tent or tarp constructed of silnylon, it is recommended that you seal the seams withGear Aid Silnet Silicone Seam Sealer in order to ensure that the tent or tarp is waterproof in the rain. Despite the fact that many manufacturers provide this as an optional service, you may also perform it yourself. Tents that have been waterproofed with polyurethane or polyethylene (abbreviated as SilPU, PU, or SilPE) are normally factory seam-taped and are commonly marketed in this condition right out of the box, unless otherwise specified.

You’ll need the following items:

  • A brush that you don’t mind tossing away when you’ve finished with it
  • A tin can or other container to mix things up in
  • A little piece of card, or a very steady hand are all you’ll need. Cloth that has been dampened
  • Gear Aid Silnet Silicone Seam Sealer, which is sticky and dirty stuff
  • Gear Aid Silnet Silicone Seam Sealer (which is sticky and messy stuff)
  • Thinner for paint

Start by combining 3 parts paint thinner to 1 part Silnet in a tin until you get a workable viscous paste that can be applied easily with a brush to the seams. The main objective is to get it to soak into the stitching so that water may seep in via the openings. If you apply the Silnet without first thinning it, it will cure too thick and will flake off, giving the surface a cluttered appearance. If you dilute Silnet with paint thinner as mentioned above, one 1.5 oz container of Silnet will typically be plenty for a 1-person tent in most cases.

  1. Usually, one coat is sufficient.
  2. Pitch the shelter in fine weather or in the garage: anywhere where it will be able to dry for the better part of the day.
  3. If the item has an odd form that makes it hard to seal all of the seams at the same time, seal them one at a time on a subsequent day and repeat the process.
  4. A little goes a long way in this case.
  5. After drying, the thinned mixture will soak in and take on a tidy appearance.
  6. We may (but not always) get a small portion of any sales made using the links provided above.
  7. Although the cost of the product remains the same for you, your purchase allows us to continue to test and create unsponsored and independent gear evaluations, beginning FAQs, and free hiking guides for you.

Seam-sealing

Tents made with silicone-coated nylon (silnylon) cannot be machine seam-taped since silicone is an inorganic compound that does not accept polyurethane (PU) seam tape. Instead, silicone-coated nylon tents must be hand-painted. Seam sealing prevents water from entering the tent through the seam holes that are generated during the sewing process. The good news is that the silicone is quite long-lasting, so you will only have to seal your tent once throughout its lifetime. We do not include the expense of this process in our standard price, however we do sell seam-sealing kits for $6-8.

  1. Continue reading for a video on “How to Seam-Seal a Bag.” Permatex Flowable Silicone Windshield and Glass Sealer, which is a commercially available premixed solution that performs rather well, is a good example of this.
  2. Additionally, we provide a seam-sealing service for $35.
  3. It’s less difficult than it appears to be to seam seal your own tent!
  4. Depending on the outdoor temperature and humidity, the seam sealer will dry in 3-4 hours.

After the sealant has dried, you may “check your work” by spraying the sealed shelter with a hose and checking the seams to see whether any water has gotten in through them.

Seek Outside Seam Sealing Instructions

We have made it simple and quick to seal one of our tipis or trekking tents with minimal mess and with little effort. Rather of stitching, we flat fell our seams, which means the cloth is folded over itself in a certain way before being sewn. It has been demonstrated in our tests that this form of seam is extremely water resistant and does not leak. Anything sewed into these seams, on the other hand, has the potential to wick water through to the inside. Sealing the external seams (the double lines of stitching) is recommended; however, sealing the door tiebacks, hang loops, and guyout points is much more critical to ensure a solid seal.

You may also use an acid brush to apply the sealant, but a finger works just as well and is much faster.

Areas to be covered include:

  1. Outer door tiebacks
  2. Inner door tiebacks
  3. Inner hang loops
  4. Outer guyout points
  5. Cone, stovejack, zippers

SEAM SEALING STEPS

1st, seal the exterior seams of the shelter – for smaller shelters, such as those for four people or less, pitch the shelter normally and close the seams. When working on big shelters, it is beneficial to pitch the tipi inside out so that you can access all of the seams. 2.Tiebacks on the outside of the door: 3.Tiebacks on the inside of the doors: The butt of the inner hang loops should be sealed beneath the flat fall flap on both the exterior and inside of the tipi, and then all sides of the base on both sides of the tipi should be sealed on the inside.

The cone itself is waterproof; all that needs to be protected are the seams, the hang hook, and the stitching on the labels and you’re good to go.

In the event of heavy occupancy and persons sleeping under the zippers, make sure the zippers are completely sealed on the inside and outside.

Seam Sealing (Guide) Any Tent or Tarp

It may be necessary to seam seal your tent or tarp in certain situations. Usually after using your shelter for a long length of time (dozens of nights) or if you intend on camping in a particularly damp environment, it is necessary to replace it. In most cases, seam sealer is required where the needle punctured the cloth during the manufacturing process. The sewing machine made scores of little holes in the cloth as it worked its way through it. As the material ages, tension in the material causes those microscopic holes to grow a little bit wider.

Even though this is true for practically all tents, we’ve seen that almost no one takes the time to educate their consumers on this critical step.

Learn Your Tent Fly Fabric

Remember to check with the manufacturer of your tent to find out what kind of sealing agent they recommend using.

This is really crucial! Luxe Hiking Gear tents, for example, are made of a fabric that necessitates the use of a silicone-based sealant (approved for PU coated fabrics). In our store, we provide silicone-based seam sealants.

Preparing the Fabric for Sealer

It is critical that you thoroughly clean the tent fabric in the places where you will be sealing it. Set up your tent outside, at a location where you will be able to leave it for an extended amount of time and where the weather prediction is favorable. To ensure a lovely smooth seal, the tent should be taught and wrinkle-free when it is assembled. When it comes to washing the cloth, we like to use isopropyl rubbing alcohol. This substance is easily accessible and quickly evaporates. You may get some from any drugstore.

Don’t Make a Mess

It may be quite simple to get seam sealer on the tent fabric in places where you don’t want for it to be. Applying masking tape beforehand and removing the tape after 30 minutes of drying time are some suggestions for avoiding this situation. Alternatively, you may pre-cut a narrow rectangular stencil from thick paper or card that you already have and just move your stencil about the room while painting strips of seam as you go. Keep the amount of sealer you use to a minimum; you just need enough to fill the stitching holes.

Seam Sealing Your Tent

You are now prepared to apply seam sealant to the seams of your tent. Apply the sealer with a little brush to ensure that it reaches all of the small thread holes. Most of the time, you will want to apply sealant on the outer tent rain fly where it has been stitched. Pay particular attention to the peak of the tent and the regions where the guyline loops pull; because the fabric is under stress in these locations, these are the areas that should receive the most attention if you just have a little amount of seam sealer.

Seam sealing bathtubs and inner tent floors, when the fabric is near to the ground, is something some people do.

After the Seams are Sealed

Leave your tent up for 12 to 24 hours, or until the next day, depending on the weather. Examine and visually examine the region to ensure that you did not overlook any potential problems. In some instances, it may be required to submit a new application. Even after it has dried, seam sealant remains tacky (sticky) to the touch until it is removed. Baby powder or cornstarch can be used afterwards to prevent the sticky sensation, but bear in mind that it will leave a delicate white look on all of your seams.

There’s a good chance that you overapplied.

How to Seam Seal a Tent

Whatever the weather conditions are—dew, rain, or a sudden downpour—water has the ability to seep into any shelter through needle holes in the seams or an unintentional pinhole or rip. You may need to treat your shelter at some point, whether it is seam-sealed and completely waterproof, factory-taped, or otherwise untreated. This will keep the elements at bay while also maintaining the structural integrity of your shelter. Fortunately, the seam-sealing procedure is quick and rather straightforward.

Always adhere to the manufacturer’s recommendations as well as the manufacturer’s guidelines for your seam sealant. Seam sealant names such as McNett, Kenyon, and Aquaseal are among those available on the market. The following McNett items are highly recommended by several tent companies:

  • Whatever the weather conditions are—dew, rain, or a sudden downpour—water has the ability to seep into any shelter through needle holes in the seams or an inadvertent pinhole or rupture. In order to keep the elements at bay and your shelter in excellent working order, you may need to treat your shelter at some point, whether it is seam-sealed and entirely waterproof, factory-taped, or otherwise sealed. Thank goodness for that, the technique of seam sealing is uncomplicated and quite simple. Make sure to check with the maker of your tent or tarp to learn what particular goods and methods they recommend or warn against before you begin. Always adhere to the manufacturer’s recommendations as well as the manufacturer’s instructions for your seam sealant product. Seam sealant manufacturers include McNett, Kenyon, and Aquaseal, among others. There are many McNett items that several tent businesses recommend:
  • SilNet is intended for use on shelters constructed of silicone-coated textiles, such as silnylon. It may also be used for simple on-the-job repairs in the field.

Application of the two is nearly same in terms of procedure (follow the directions for your sealant).

Preparation

The first step in seam sealing is to start with a clean, dry tent. Tent floor, fly, and bottom of tent body seams and connection points are the most vulnerable to water intrusion, therefore pay close attention to these areas and the tent’s attachment points. There is no need to seam seal any of the mesh. Because extended exposure to seam sealant without appropriate ventilation can be hazardous to your health, you’ll want to complete this task outside if possible. Also, choose a warm, dry day to complete the project because it will take some time for the sealant to properly cure.

  1. Prepare a clean and dry tent before beginning. Tent floor, fly, and bottom of tent body seams and connection points are the most vulnerable to water intrusion, therefore pay close attention to these areas. Any mesh does not require seam sealing. Because extended exposure to seam sealant without appropriate ventilation might be hazardous to your health, you’ll want to do this task in the fresh air. In addition, choose a warm, dry day to complete the project because it will take some time for the sealant to dry completely.
See also:  How To Make A Fairy Tent

The Seam Sealing Process

When applying sealant to the tent and fly, make careful to pull them taut as much as possible. Now comes the step when you have to put the sealant on the joints. You should seal all of the seams of your shelter at once if you’re sealing your shelter for the first time and not in reaction to a specific leak. This will help to guarantee that your tent doesn’t break while you’re in the middle of a rainstorm days away from a repair. Pay close attention to the tent’s most exposed seams, which include the tent floor, fly, and bottom of the tent body, as well as the webbing connection points, which are the most probable places for water to enter.

The maker of your shelter may advise you on which seams to seal and which ones to leave open.

  1. Apply painter’s masking tape to the interior walls 1/4 of an inch from both sides of the seam on both sides of the wall. This will make it easier to apply the sealant and will prevent the sealant from spreading out too far during the application process. It will also offer your job a more professional appearance
  2. Sealant should be applied to the interior wall seams of your tent, with the lower portion receiving the most attention. Continue around the perimeter, leaving a thin layer of sealant that extends approximately 1/4 of an inch past the edges of the seams. Pay close attention to making sure that all of the needle holes are filled in. Mesh areas do not require sealant, although it will add extra strength to the stitching by holding it together more tenaciously. Take care not to get sealant in the zippers. Make use of the same amount and width of sealant when sealing any seams on the tent floor. Make sure that all of the tent’s seams are taut before closing the tent’s opening and applying another coat to the outside of the tent. Many tents are delivered with seams that have been factory taped. The outside seams of these tents can be sealed in order to provide maximum waterproofing. It is possible to use sealant like glue to close a seam and then reapply the tape in the event that it begins to peel. Allow the tent to air dry
  3. When it comes to one-piece tents, the sealing is complete. When using a tent with a rain fly, it is best to put the rain fly on upside down so that the inside seams are visible. Continue with the same procedure as described above in order to seal the fly’s seams.

Afterward

  1. You may seal both sides of the rain fly here if you want to provide even more protection. Make sure that the tent is left tight to dry and that the rain flap is securely fastened to the tent. Allow for complete drying of both parts for 12 to 24 hours, or overnight if the weather permits
  2. Applying seam sealant to the other side of your rain fly and tent bottom will provide an additional layer of protection. After all of the seams have dried, it’s time to get creative. Establish a routine for setting up the tent, then put on the sprinklers for an hour or so. Climb inside and take in the beauty of your creation. Examine the sealant for any leaks or cracks in the sealant. Testing the seams thoroughly now will guarantee that there are no surprises out on the trail later on in the trip. Allow your tent to dry completely before repeating the seam sealing technique on any troublesome places if necessary. Once your tent has been completely cured and dried, keep it in a loose manner away from direct sunlight and outside of its stuff pouch. Your shelter is now complete and ready to be used

Questions and Considerations

Pay great attention to the tie-down points in the corners, as these are particularly vulnerable. Is it true that my tent’s seams are factory taped and hence seam sealed? No. Tents that are more recent in design frequently have factory-taped seams. This signifies that a waterproof material has been doubly sewn between the tent’s seams to keep the elements out. However, while a factory-taped seam is normally fairly water-resistant, and it should stand up well in compared to not sealing the seam at all, it is not the same as totally waterproof seam sealing.

  1. I’ve just spent a significant amount of money.
  2. Some tent manufacturers seal the seams of their products.
  3. You may find that seam sealing your shelter yourself is far less expensive.
  4. Shelters constructed with silicone-treated nylon are not factory-taped, as seam tape does not adhere to the material when it is wet.

Is it necessary for me to seam seal my new tent? First and foremost, always check with the manufacturer of your tent, since most have their own recommendations for how and where to apply sealant based on the materials used and the form of the shelter.

  • If your tent’s seams are not sealed or factory-taped, you will need to seal them yourself after purchasing it. Make sure to start on a warm, dry day before heading out on the trails. If your tent’s seams have been factory-taped, there is no need to seal it. Even though your tent should be very water-resistant, you may wish to check its waterproofness under a sprinkler before venturing into the bush. If your tent will be used frequently, especially in damp weather, consider sealing the seams. An additional coat of sealant will provide your shelter with additional protection as well as optimal waterproofing
  • If your tent is already seam-sealed, there is no need to seal the seams immediately after purchase. However, you may wish to test its waterproofing under a sprinkler to make sure it is enough. Even with seam sealing, frequent inspections and maintenance are still necessary, especially when the system is subjected to a lot of abuse.

There are several different seam sealant products available on the market. Is it okay to apply any kind of sealer on my tent? No. Various sealants are developed for the treatment of specific textiles. Check to see what kind of materials were used to construct your tent (nylon versus silnylon, for example), as well as what the manufacturer recommends. The seam sealer you pick should be suitable for the fabric of your tent, and it should be easy to apply. When should I seam seal or spot treat my tent and how often should I do so?

  • If you are a backpacker or camper who uses your equipment frequently, you may wish to apply a coating twice a year to protect it.
  • Apply another layer of sealant if any of the sealant is missing, leaking, or fractured in parts.
  • What should I do in this situation?
  • The floor was seam-sealed by myself.
  • The majority of the time, it is suggested.
  • In order to prevent water from funneling below the tent, make sure the ground fabric is smaller all around than the tent and does not protrude from underneath.
  • Keep in mind that the manufacturer’s cleaning, maintenance, and repair instructions should always be followed.

Why You Should Seam Seal Your Tent Before Your Thru-Hike

It works similarly to glue in that it is intended to fill up the seams where microscopic holes were created during the tent sewing process. Many lightweight tents do not come with seam sealing, unless you pay an additional fee at the time of purchase. It is critical that you choose a tent sealant that is compatible with the fabric of your tent. Different tent materials will necessitate the use of various seam sealers. Using the incorrect seam sealer will result in the tent fabric failing to adhere with the sealer, resulting in the likelihood of leaks.

When it’s warm and dry outside, it’s better to use seam sealant to prevent leaks.

The efficacy of the sealant will be reduced if any dirt is left along the seam after it has been cleaned. Setting up the tent also makes applying seam sealer much easier, especially if the manufacturer recommends applying the sealant to both sides of the canvas, which is the case.

Different Types of Seam Sealer

Seam sealers are available in a variety of formulations. It is up to your tent maker to determine which seam sealer is the most appropriate for your tent. Silicone nylon (also known as silnylon) is used to manufacture the majority of lightweight camping tents. It is possible to seal this sort of cloth with a silicone sealer. ** Always check with the manufacturer to ensure that the seam sealer you are using is appropriate for your tent.

Tent Seams Without Seam Sealer

If you examine the seams of your tent, you can determine whether or not seam sealant was used. The seams are seen in this photograph as they are not sealed.

Seam Sealer Being Applied

The seams of the tent are being sealed with tent sealant.

Dry Seam Sealer

It will take at least 3 to 6 hours for the seam sealer to completely dry. In rare cases, it may take even longer to complete the task. Testing for dryness is critical before removing the tent from its storage location. It is recommended by certain manufacturers that the tent be stored for 24 hours after it has been applied. By softly touching the seam sealer, you can determine whether or not it is dry. The fact that there is any stickiness at all indicates that it is not dry and should not be packaged.

It’s critical to allow the seam sealer to dry completely before packaging the items.

Summary

It is critical that your tent seams are properly sealed with the appropriate sort of sealant. If the seams of your tent are not adequately sealed or are not securely sealed at all, you will most likely suffer a leak in your tent if it rains. Seam sealing a tent is a reasonably simple technique, provided that the conditions are favorable. **When sealing your tent, always follow the manufacturer’s recommendations.

How to Seam Seal a Tent (Step by Step Guide)

HelloTrail is entirely sponsored by its readers. If you make a purchase after clicking on one of our expert-recommended links, we may get a commission at no additional cost to you. More information may be found here. After all, you’ve purchased a tent and are prepared to set off on a wilderness trip, right? If only everything were that simple. The most crucial step before heading out to the camping is to make certain that your tent is entirely waterproof. It is true that the material will keep you dry, as stated in the product description online, but what about the seams?

You and your camping companions will be left in a dripping scenario.

The Seam Sealing Process

Don’t go putting the sealer on just yet. First and foremost, we must make certain that the tent is clean and dry. Follow the methods outlined in “How To Clean A Tent That Smells” for a more in-depth cleaning technique. Once everything is in order, set up the tent in a well-ventilated location and put on your protection gear. If you handle the seam sealant incorrectly, it might release poisonous fumes and hurt your skin. To be safe, I recommend that you put on disposable rubber gloves and an old long-sleeved shirt before starting.

Some products can take up to a day to dry, which means you’ll have to leave your tent set overnight – which is why you shouldn’t try to do it in a public park.

Also, if the weather prediction calls for rains, plan on waterproofing your tent at a different time than usual. Excessive moisture might not only extend the drying period, but it can also entirely change the makeup of your sealant.

2. Application

The application of seam sealing is arguably the most straightforward step in the entire procedure. Every sealant is different, and I’d want to offer you a general description of how to apply each product correctly. Instead, I’ll provide some rough estimations as well as some basic principles. First and foremost, always read the manufacturer’s recommendations for both the tent and the sealant solution before using either one. Manycamping tentswill come with a diagram that shows which seams will need to be waterproofed and which will not.

Whenever possible, start by asking yourself, “That is the most likely spot where water will enter the tent?” and working your way from there.

I won’t have to clean up after myself.

Apply the product and let it to dry.

3. Post-Treatment Care

Prepare for a long period of anticipation — cue the Jeopardy theme song. Wait another 24 hours after the required curing period has elapsed to verify that the sealant has set, regardless of what the manufacturer’s instructions indicate. Pour an hour in your tent while you’re testing the quality of your job, put on the hose or sprinklers – or wait until it’s raining – and sit in your tent. If there are any leaks, you’ll want to check all of the stitches and seams at this period. To repair a problem location that has not been resolved, dry the tent and fix it with the remaining sealant.

Tent Seam Sealing FAQs

After that, let’s have a look at some of the often asked questions concerning tent seam sealing.

Q. Why Do I Need To Seam Seal My Tent?

A. Although the cloth is waterproof in and of itself, it must be put together in order to fit the tent’s design. Because of this, stitch holes are left in the cloth, which might result in a water leak. Seam sealing your tent is essential if you want to keep dry when camping in the great outdoors.

Q. Why Didn’t The Manufacturer Already Do This?

A. Some tent manufacturers factory-seal the seams during the manufacturing process. Others, on the other hand, prefer not to invest the money because the procedure can be lengthy and time-consuming. It is critical to determine whether or not the product was seam-sealed throughout the manufacturing process. The majority of the time, it is less expensive for the buyer to seal the tent himself or herself.

Q. What’s The Difference Between Seam Sealing And Seam Taping?

It is an applied sticky polymer that plugs the needle holes between stitches in order to prevent fraying. Seam taping, on the other hand, is the process of adhering waterproof tape to the seams or sewing it into the seams with two threads. If a tent is shipped from the manufacturer with seam tape already applied, you will not need to use a seam sealer.

Q. How Often Do I Need To Seam Seal My Tent?

You will want to waterproof your tent before stepping out into the woods if yours is not already waterproofed. The only thing I do differently is seam seal my tent once a year, in the spring, just before the major camping season gets underway.

However, it would be preferable if you inspected your shelter after each usage to ensure that the stitches and seams were in good working condition. If you come into any weak places, make sure to address them before returning to the great outdoors.

Q. Can I Use Any Sealant Product?

You will want to waterproof your tent before stepping out into the woods if yours is not already waterproof. The only thing I do differently is seam seal my tent once a year, in the spring, just before the big camping season begins up. Nonetheless, it is recommended that you examine your shelter after each usage to ensure that the stitches and seams are in good condition. If you come into any weak regions, be sure to address them before returning to the great outdoor.

See also:  How To Keep A Tent Cool

WrappingSealing It Up…

If you want to ensure that your camping vacation is dry and comfortable, you must seal the seams of your tent. Never forget to check your tent’s stitching on a regular basis to ensure it lasts as long as possible. You can always go back to this page if you have any questions. Alternatively, you can write a remark. We’re always willing to lend a hand! If you follow the recommended tips and tactics for waterproofing your shelter, you’ll be swimming in outdoor activities rather than in a tent full of muddy water.

His nature as a dreamer who like to have his head in the clouds at all times makes the mountains an ideal environment for him.

Find out more about Andrew’s love of the great outdoors.

8 Best Tent Seam Sealers in 2022 ⋆ Expert World Travel

The most recent update was made on January 17, 2022. Finding the ideal tent for all of your requirements might be difficult, but once you have done so, you will have the ideal layout with the appropriate amount of room for sleeping, storage, and anything else you want to make your camping experience as enjoyable as possible. In a Nutshell: Tent Seam Sealers: Our Top 3 Picks Unfortunately, tents do not endure indefinitely, and after a time, you may notice rips and tears that eventually result in leaks and render your tent a bit obsolete in terms of functionality.

Purchasing a new tent is an expensive investment, and it is possible that you may not be able to locate another tent that is as good as the one you purchased.

Seam sealer is a fantastic product that will maintain your tent in good condition for years to come, preventing those pesky leaks and allowing you to continue to use your beloved tent.

Best Tent Seam Sealer

January 17, 2022 (Last updated) While finding the ideal tent for all of your requirements can be a difficult task, when one is located, it will have the ideal layout with the appropriate amount of room for sleeping and storage, as well as anything else you want to make your camping experience as enjoyable as possible. A Quick Look: Three of the best tent seam sealers we’ve found so far. Unfortunately, tents do not endure indefinitely, and after a time, you may notice rips and tears that eventually result in leaks and render your tent somewhat obsolete.

New tent purchases are expensive, and it is possible that you will not be able to locate another tent that is as good as the one you have already discovered.

Utilizing seam sealer on your tent will maintain it in good condition for years to come, preventing those pesky leaks and allowing you to continue using your favorite camping gear.

Throughout this post, we’ll take a look at the top tent seam sealers available on the market and compare them against one another so you can discover the best one to repair the seams on your favorite tent.

Pros

  • It is extremely reasonably priced and provides excellent coverage. It is used to seal silicone-treated equipment. Extreme temperatures have no effect on this product because it is waterproof. It holds up effectively against strong winds and rain. If you make a mistake, you can clean it up using paint thinner. It will not crack or peel until it has been cured.

Cons

  • A very little quantity is contained within the tube. It’s a bit difficult to apply because it’s so thick.

Product Information

  • Very little substance is contained within the tube
  • Yet, A bit difficult to work with because it is thick.

Coleman Seam Sealer

Coleman’s Seam Sealer is intended for use with a variety of items such as tents, tarps, backpacks, and other similar items. However, it is only a seam sealer and is not very effective at patching up a gear, so it is not an all-gear puncture repair kit in the same way that some of the others are. This seam sealer is manufactured from a water-based composition that is environmentally safe, and it comes in a 2-ounce container. There isn’t any information available on the coverage, but it is undoubtedly excellent value.

  • In addition to the Seam Sealer, Coleman also includes a foam applicator that makes applying the sealant a snap.
  • It takes only 2 hours for the product to dry and become waterproof once it has been applied.
  • Because it is water-based, you will need to put it on a dry tent, which may be difficult if it is raining.
  • It’s reasonably priced, offers excellent value, and is portable enough to fit in your bag.

Pros

  • It comes with a foam applicator for quick and simple sealing. Environmentally beneficial because it is based on water
  • Extremely inexpensive and fantastic value for money
  • For the same price as the others, you may get double the volume. It cures in 2 hours, making it excellent for on-the-go applications.

Cons

  • It’s not a good idea to patch things up
  • When it’s raining, it’s difficult to utilize

Product Information

  • Size (ounces): 2
  • Cure Time (hours): 2
  • Coverage (percentage): na
  • Tents made of nylon are the most common use for this feature.

Gear Aid Seam Grip FC

TheGear Aid Seam Grip FC is packaged in a convenient 2-ounce container with a built-in brush for easy application and cleanup. Some individuals adore the brush, but others despise it. If you’re having trouble applying it, simply put some liquid on your own brush and apply it that way. The finest features of this sealer are that it cures rapidly (in just two hours) and that it covers a vast area (up to 60 ft. in diameter). In other words, you should be able to construct a whole tent and be able to utilize it on the fly.

It may be used to seal up a variety of items, including tents, tarps, and awnings.

The sealer provides a long-lasting, waterproof barrier that is elastic and moves with the cloth once it has been applied to the fabric and allowed to dry.

Overall, this is an excellent all-around tent seam sealer that works on any and all of the materials that may be used to construct a tent.

Pros

  • It cures in only 2 hours, making it ideal for on-the-go applications. For ease of application, the product has a built-in brush. Per bottle, there is a significant quantity of coverage. Because of the covering, it is ideal for large tents. It is waterproof and produces a high-quality seal.

Cons

  • When applying sealer, a brush is not the most effective tool. The shiny sheen is not completely imperceptible.

Product Information

  • It comes in two sizes, each weighing two ounces. The cure time is two hours, and the coverage is 60 feet. The top feature is that it cures quickly.

Texsport Polyurethane Waterproof Seam Sealer

If you have a lot of patience, theTexsport Polyurethane Waterproof Seam Sealer is about as excellent as it gets when it comes to seam sealers. As a result, while this tent seam sealer isn’t intended for use on the trail, it is ideal for use in the house or in the garage. This sealer may be used on a variety of items, including tents, coats, and backpacks. It is quite simple to use; simply spray it on and follow the on-screen directions. The sealer is made of polyurethane, and when it has been allowed to cure for 48 hours, it will be odorless and virtually undetectable, but it will protect the living daylights out of your tent.

Because it is lightweight and incredibly flexible, it flows naturally with the fabric, ensuring that you receive the performance you want from your tent.

Using this tent seam sealer, you can also say goodbye to cracking and peeling. Although it is one of the best tent seam sealers available in terms of final result, you will need to apply two coats and allow for a 48-hour drying period in order for it to be effective.

Pros

  • Spray-on application makes for a very simple process. Once it has dried, you will not be able to see or smell it. Waterproof, dirtproof, and UV resistant
  • You may even wash the tent and it will not lose its color. Since it has some elasticity, it will naturally bend with the cloth. After it has been dried, it will not split or peel.

Cons

  • Although it is a little more costly, you receive larger volume. It takes two days to cure and is only intended for usage at home.

Product Information

  • Cure time is 48 hours
  • Size (ounces) is 14. No coverage is provided. Tents are the most common application for this feature.

Gear Aid Seam Grip WP

TheGear Aid Seam Grip WPis a universal seam grip that can be used with virtually any material, any tent, and all of your other gear. It will bind with nylon, polyester, canvas, leather, and vinyl, thus you will be able to seal just about everything with this product. In all, the tube contains 1 ounce of liquid and is designed to cover a tiny area, only 12 feet of seams. You can, however, purchase bigger tubes and multiple packs if you so choose. It comes with two application brushes, so you won’t have to go out and get any additional ones later.

Following the application, you’ll have to wait for it to cure for eight hours, which is quite a long time.

Once dried, it provides a watertight coating that will not peel or break, and it is also flexible enough to allow the cloth to move freely as well.

Pros

  • A variety of textiles may be utilized with this product. Extremely adaptable and may be used with any piece of equipment. All seams become waterproof as a result of this. There are two applicator brushes included. It is flexible and does not peel or fracture when exposed to the elements.

Cons

  • It comes in one ounce, cures in eight hours, and has a 12-foot coverage. Its top feature is that it is permanent, and its primary use is tents.

Kenyon Seam Sealer

Dimensions (ounces): 1; Cure Time: 8 hours; Coverage: 12 ft; Top Feature: Permanent; Primary Application: Tents;

Pros

  • Water-based and environmentally friendly
  • It is versatile and may be used on a variety of textiles. Once it has dried, it becomes clear and bendable. Because of the tip, it is simple to use
  • Creates a long-lasting, watertight seal

Cons

  • For simple application, it’s a little too watery. It is possible that you will not survive a severe storm.

Product Information

  • Size (ounces): 3.2 ounces
  • Cure Time: hours
  • Coverage: na ft
  • Top Feature: Permanent
  • Primary Use: Tents
  • Size (ounces): 3.2 ounces

Gear Aid Seam Grip TF

Size (oz): 3.2 oz; Cure Time: hours; Coverage: na ft; Top Feature: Permanent; Primary Use: Tents; Dimensions (inches): 3.2 ounce

Pros

  • A polyurethane sealer that performs exceedingly well
  • Seams are watertight, and the material is exceptionally durable
  • Once dried, it is virtually indistinguishable, ensuring that your tent will always appear the same. Once cured, the material is malleable. The applicator has a built-in foam brush for convenience. A single bottle may cover a large number of seams. It dries quickly, taking only 4 hours to cure

Cons

  • It’s difficult to cover 85 square feet by spreading thin
  • Some people dislike the applicator brush
  • Others appreciate it.

Product Information

  • Size (oz): 3.2 oz
  • Cure Time: 4 hours
  • Coverage (sq foot): 85 sq ft
  • Top Feature: Complete coverage
  • Primary Application: Tents

Iosso Seam Sealer

A wide variety of textiles can be utilized with the Iosso Seam Sealer; however, cotton, polyester, and synthetic materials perform best when using this product. In addition to tent seams, it works well on backpacks, awnings, and other similar items as well as on clothing. With a built-in brush applicator, it’s a cinch to apply the sealer to the seams on your furniture. The liquid, on the other hand, is rather thin and has a tendency to drop readily, so use caution when applying it. It comes in a 4 oz bottle and will provide you with adequate coverage to tackle a medium-sized tent.

As well as being flexible, it will endure a long time, protecting both your tent and yourself from any wetness for an extended period of time.

Pros

  • Once applied, it will not alter the fabric’s appearance. It comes with an integrated foam brush applicator. It is versatile and can be used on a variety of different materials. In relation to the volume, it provides a decent covering area. It creates a strong, long-lasting waterproof seal.

Cons

  • Dimensions (oz): 4 oz
  • Cure Time: na
  • Coverage: na
  • Top Feature: Permanent
  • Primary Application: Tents

What To Look For In A Tent Seam Sealer

As you can see from the comparison of all of the tent seam sealers in this study, they are all effective on particular types of fabrics and materials. Make sure to get a sealer that is compatible with the fabric of your tent in order for it to be as effective as possible. They should be able to seal nylon, polyester, canvas, silicone-coated textiles and other types of materials, so they should be able to fulfill your needs.

How Thick Is The Sealer?

The thicker the sealer, the more difficult it is to apply, but the coating is typically a little more durable, so the decision is up to you in this situation.

Thinner sealers are considerably simpler to apply, but they can drip if you’re working at a height and you’re not paying attention. In any case, you’ll most likely end up having to get used to whatever thickness you wind up picking, so I wouldn’t stress too much about it.

How To Apply The Sealer?

Yet, the thicker the sealer, the more difficult it is to apply; however, the coating is often a bit more durable, so the decision is yours. Sealers that are thinner in consistency are considerably simpler to apply; nevertheless, they may begin to drip if you are working at a high angle. In any case, you’ll most likely end up having to get used to whatever thickness you wind up picking, so I wouldn’t stress too much about it right now.

Volume

Consider how much tent seam sealer you’ll use and get the suitable amount so that you don’t run out in the middle of the project or halfway through. Because they are not particularly costly, it is usually a good idea to get an additional one or two. If you’re setting up a tiny tent, one little tube should enough, but if you’re setting up a large tent, make sure to obtain a bottle that holds at least 4 ounces.

Our Favorite Tent Seam Sealers

If you’re on a tight budget, the Coleman Seam Sealer is the best tent seam sealer to use. Water-based, environmentally friendly seam sealer that dries in only 2 hours. It may be used for a variety of applications. You may use it on the trail or at home on your tents, backpacks, and other gear on the fly, depending on your needs. It’s about as inexpensive as a tent seam sealer can be made to be. The Gear Aid Seam Grip FC tent seam sealer is the best all-around tent seam sealant available. The fact that it is intended for use on canvas as well as polyester and nylon means that it will work on virtually any tent you may need it to function on.

TheTexsport Polyurethane Waterproof Seam Sealer is the finest tent seam sealer on the market.

Because of the spray-on lid, it’s simple to apply and will protect your tent from virtually everything: water, sunlight, dirt, and other elements of nature.

It does take 48 hours to dry completely, but the wait is well worth it.

Leave a Comment

Your email address will not be published. Required fields are marked *