How To Build A DIY Cannabis Grow Tent In Just 3 Steps! – RQS Blog
Trying to come up with a simple and cost-effective method of growing your own marijuana? As you will see in the following section, it is really simple to construct your own grow tent for a fraction of the cost of a store-bought tent or box!
WHY BUILD A DIY GROW TENT?
Growing your own marijuana is a rewarding experience. Making a deeper connection with this ancient plant by germinating your seeds and watching them grow into robust plants with large, scented buds is a wonderful approach to deepen your understanding of it. Not to mention the fact that you’ll almost certainly wind up with a considerably superior product than you would have gotten otherwise. Unfortunately, not everyone has the luxury of having enough room to cultivate plants outdoors in the sunshine.
While tiny grow tents are rather inexpensive, you can construct your own tent for next to nothing if you put in the effort to get the right materials on your own.
IMPORTANT CONSIDERATIONS FOR YOUR DIY GROW TENT
Take a few minutes to evaluate the following critical aspects for your tent before you begin shopping for constructing materials: Take into mind the following important elements for your tent:
In order to blossom effectively, cannabis plants require well defined light and dark cycles throughout the day. Light leakage during the dark hours of the day can stress photoperiod strains, limiting their development, interfering with their blooming, or even causing hermaphroditism in the female reproductive system. According to current research, even autofloweringstrains require regular dark hours for respiration, photosynthesis, and other processes. As a result, your homemade tent must be lightproof.
Cannabis requires consistent watering and feeding. In order to prevent runoff or spills from causing harm to the environment surrounding your tent, be certain that it is waterproof.
Cannabis plants require adequate ventilation in order to grow effectively. Hot spots in your tent, on the other hand, can be caused by insufficient airflow, which can trap heat and humidity, resulting in the growth of bacteria and the attraction of pests. The ventilation in your tent is critical in order to avoid these issues from arising.
Depending on the amount of space you have available, your budget, and the number of plants you intend to cultivate, the size of your grow tent will vary. However, you may go bigger or smaller than that depending on your needs. A one by one meter tent is perhaps the most popular size used by hobby growers, but you can go bigger or smaller than that according on your needs.
Just keep in mind that if you want your plants to achieve their maximum potential, your tent will need to be at least 1.5–2m tall in order to provide them with enough space to develop and prevent them from growing too near to your lighting.
WHAT DO YOU NEED TO BUILD A DIY GROW TENT?
It is surprisingly simple to construct your own tent. A list of everything you’ll need is provided below.
PVC pipes with a diameter of 19mm are strong, inexpensive, and excellent for use in the construction of your tent’s structure. You’ll need the following supplies: For the verticals and horizontals, there are 16x straight pipes (the length of pipe will vary depending on how large you want your tent to be) 90-degree corner fittings: 8 pcs. 4 pieces of t-fittings 1 pair of cross fittings
Panda Film is an excellent choice for the walls of your tent. It’s important to remember to use the black side of the film on the exterior to absorb light and the white side on the inside to reflect light when using reflective film.
LED GROW LIGHT
There are many various types of grow lights available on the market, but LEDs are our top recommendation because of their energy efficiency and long lifespan. HIDlights are less expensive than LEDs and can give excellent results, but they must be replaced every two harvests and consume a significant amount of energy.
There are a plethora of fans available on the market. For large harvests, we recommend that you use a fan and a charcoal filter to remove the odors from your plants when you’re setting up your tent. If you’re putting up a tent to cultivate a few plants, a conventional wall fan will enough for the purpose.
Once you’ve obtained your resources, you’ll need the following tools to complete the construction of your tent: Duct tape is a type of adhesive that is used to seal ducts (to create the Panda Film covering for your tent) saw with a hand (in case you need to cut any of your PVC pipes to size) Velcro is a type of fastener (for the opening of your tent)
HOW TO SET UP YOUR DIY GROW TENT
Follow these instructions to construct your very own cannabis grow tent in less than a day, now that you have your ingredients and tools.
STEP 1: ASSEMBLING THE FRAME
If you weren’t able to get PVC in the size you needed, you can cut it using a hand saw to fit your project. In order to construct a tent of any size, you’ll need 16 straight pieces of pipe: four for the verticals (which should be at least 1.5m long), four for the foundation, and eight for the top of your tent. Once you’ve got your straight pieces of pipe cut to size, you’ll need to link them together and construct the frame of your tent using the fittings. Keep in mind that your roof should have a cross fitting in the centre for more stability in order to keep your light, fan, and other accessories securely in place.
STEP 2: COVERING YOUR TENT
This means that you’ll need to cover your tent twice: once inside the tent with white panda film for the interior, and again outside with black film to keep out the elements. Begin by wrapping a single sheet of film securely around three of the four walls. This is the quickest and most straightforward method (the 4th will be the opening of the tent). The film should be secured to the PVC pipes where the opening will be. After that, cover the top of your tent with another piece of plastic film.
Step inside your tent and search for light leaks, which you may seal with duct tape applied from the outside of the tent.
Lastly, cut a length of film long enough to stretch from the centre of the ceiling down to the bottom of your tent to serve as the tent’s opening. Using duct tape, attach it to the ceiling of your tent and Velcro, attach it to the PVC frame on the sides and bottom of your tent.
STEP 3: INSTALLING YOUR LIGHT AND FAN
As directed by the manufacturer, attach your grow lamp to the top of your tent using the mounting bracket that comes with it. Always remember to remove the power wire from the ceiling through a small aperture in the roof and to cover the edges with duct tape to prevent light from leaking through. You’re finished when you’ve only placed your fan on the floor!
TIME TO START GROWING CANNABIS!
It’s time to go growing now that you’ve finished building your own DIY tent. If you want a comprehensive list of all the devices you’ll need to cultivate your plants, check out our page on indoor cannabis growing equipment. And remember to get your seeds straight from our web shop to guarantee a successful harvest! Best of luck with your growth!
DIY Grow Tent: 11+ Easy Yet Inexpensive Grow Box Ideas
In addition to gardening tools and other indoor growing equipment, grow tents are readily accessible online or in stores in a variety of sizes – ranging from as tiny as 22 square feet to as large as 444 square feet and 545 square feet.
Tips For Gardening In DIY Grow Tents
In order to explain how to make a DIY grow tent, I’d want to first provide some background information on why building your own grow tent is a smart idea in the first place, as well as the essential prerequisites for building a fantastic grow tent. I understand that it may seem time-consuming, and it is true that doing so will necessitate some work, but it will be well worth it. In contrast to using a grow tent alone, which provides you with the control you need to ensure that your plants survive, constructing your own grow tent offers you the advantage of being in complete control over whether or not you have enough room for it.
Additionally, how many plants you can grow in a grow tent, room, or box will be dictated by this factor.
In your search for ready-to-assemble grow tents, you may find yourself desiring characteristics that a certain manufacturer does not provide, but which other brands do offer.
To put it simply, you may include whatever characteristic you want that you think would work well with your crops or plants.
Key Requirements That Your Grow Tent Should Have
Functionalities that can assist you in growing your plants or crops should be included in a grow tent. For a perfect grow tent, there are a few important considerations that should be taken into account. Here are a few examples of them.
Shining A Grow Light On Reflective Materials
It is true that any LED grow lamp will provide the illumination requirements for your plants. Your DIY grow tent, on the other hand, should be able to reflect light efficiently. You’ll discover that professionally manufactured grow tents typically have walls composed of reflective mylar, which allows them to efficiently reflect light back to your plants. As an added security measure, your grow tent should be completely lightproof.
The light leaks are detrimental to the correct growth of plants and should be avoided. As you need to be able to manage the amount of grow light you have in your grow environment, it is important that no outside light interferes with your lighting setup.
It’s better if you can build a grow tent yourself that you can seal tight. An airtight grow tent allows you to have greater control over the atmosphere in your growing environment. It can also assist you in keeping the fragrance of your plants under control. Maintaining the airtightness of your grow tent can also assist you in avoiding pests that can be detrimental to your plants. Mylar and other solid materials can aid in the construction of an airtight tent. Always keep an eye out for cracks or openings that might let air and light to escape from your grow tent.
Several professional grow tents are equipped with compartments or pockets that allow you to keep your gear.
Examine potential locations for pockets or compartments for not just your equipment, but also additional grow tent necessities such as dehumidifiers and vent systems, which can take up a significant amount of space.
12 Easy DIY Grow Tent Plans For Year Round Indoor Gardening And Seed Starting
A do-it-yourself project will undoubtedly make your indoor gardening hobby more personal. To be honest, I think that doing DIY projects may be a fun group activity at times. ThisDIY grow box project is also an excellent opportunity to spend quality time with family, friends, or partners. In the meanwhile, if you’re interested in learning how to build a grow tent, here are some DIY grow box setup tutorials that I discovered and would like to share with you. If you are seeking for a cheap grow box DIY, then this article will be of use to you, regardless of your financial situation.
1: DIY Grow Tent Using A Rack Build Under $100
This is a fantastic idea if you have a tent rack lying in your basement and you want to make sure that your tent can scatter light adequately. This alternative will most likely cost you no more than one hundred bucks. The rack itself is going to be the most costly component. This will not necessitate the use of many carpentry abilities. It goes without saying that you’ll need a rack, but the only other thing you’ll need is some strong adhesives such as gorilla glue or broad duct tape. In addition, you’ll need to carefully consider how your wiring will be organized.
To construct the walls of this grow tent, you’ll need black and white polyethylene.
2: Assemble Your Own DIY Grow Tent Using Panda Film
Panda film will serve as the principal material for this procedure, which requires only a few different ingredients. A stainless steel adjustable rack is all that is required for this procedure, as is the case with the first method of employing a rack. The good news is that you won’t have to use any heavy tools for this, which is a relief. Panda film, for those who are unfamiliar with the term, is a waterproof, light-reflective, durable polyethylene film that is largely used to line the walls and floors of greenhouses and grow rooms to keep out moisture and insects.
Because the backbone of this grow tent is a rack, you’ll also need some Velcro or cable wires to keep track of your wirings and make sure they’re organized properly. One disadvantage of this design is that you will not be able to grow tall plants in it.
3: Grow Tent Made Of Canvas Build Under $32
Instead of using an adjustable rack, this DIY grow tent project instructs you on how to convert a canvas closet into a growing space. This is an excellent resource for persons who are on a tight budget, since it can be purchased for as little as £25 (about $32), making it an affordable option. This will need the use of a double-sized canvas wardrobe. You will be utilizing a mylar reflective material that is approximately 3 meters in length to make the inner walls reflective. Overall, this is still a straightforward and imaginative guide.
The skeleton of a canvas wardrobe may not be particularly sturdy, so you should reinforce its foundation by attaching strips of wood to it.
4: Cheap And Easy DIY Grow Box With PVC Pipe
It’s possible to get this DIY box tent guide on YouTube, so if you’re someone who wants to see how something is done, this is the video for you. This is a fantastic option if you want a grow tent that you can entirely tailor to your needs. Not only can you follow along with the video, but you can also alter the measurements to construct a larger structure up to 5 sq ft in size if desired. Because the skeleton of this tent is formed of PVC pipes, make sure you have a PVC cutter on hand in case you need to cut any of your PVC pipes to the appropriate length.
In addition to being a light-reflecting material, it may also be used as an insulating sheet.
You’ll only need a few supplies for this, including glue and double-sided tape.
Only use strong adhesives for this purpose.
5: Cheap DIY $2 Grow Tent
This appears to be too wonderful to be true, doesn’t it? This YouTube guide will only require you to purchase two major supplies for your tent, which you can get here. You’ll just need a $1 piece of acrylic sheet and a pair of hula hoops to complete this project. There are some more supplies that you’ll need to employ in order to construct a grow tent, but those additional things are most likely already laying about your home. It is essential that you hang the mylar sheet around the hoop and set the grow lamp in the center of your hoop in order to achieve the desired results.
Unexpectedly, this might really help to increase the performance of your lighting system.
6: DIY Wooden Grow Cabinet Build Under $50
This is one of those do-it-yourself grow-box projects that will only cost you less than $100 in materials and time. In reality, the person who created this tutorial only had to pay roughly $50 to do so. Even though you’ll be utilizing wood for the base and body of your tent, this is still a reasonable price to pay. A large number of supplies will be required for this project, and because wood will be used, you will be need to utilize carpentry equipment to complete it successfully.
You have the option of customizing the size of the wood that will be used, although the standard size is at least one sheet of ordinary plywood.
7: Complete Budget Grow Tent Build Under $300
Using this entire grow tent lesson on YouTube, you can learn all you need to know about how to put up a completely working grow tent. Although $300 appears to be a lot of money when compared to the other budgeting tips, this amount already contains all of the equipment you’ll need in your growing tent. Using this article, you can learn how to set up the ductwork and lighting system for your grow tent. This comprises the ventilation system, exhaust fan, and LED grow lights, among other things.
8: DIY Cloning Tents For Propagation Of Cuttings
However, if you don’t have one, you may make do with whatever racks or shelves that you happen to have around the house. Just make sure that you’ll have adequate room for your lighting arrangement before you begin construction. Alternatively, you may use a COB LED grow light, which is smaller in size and has a longer lifespan. The usage of aluminum foil as the primary cover or walls of the grow room is one of the most notable aspects of this guide. The aluminum foil that was utilized is the same as the sort that you would find in your own kitchen cabinet.
9: Building A Grow Tent With PVC
PVC pipes can even be used to construct the main structure. It’s a straightforward project that takes no more than 20 minutes to complete. When compared to wood, PVC pipes are less expensive to acquire, making them an excellent choice if you want something economical. By using this method, you can easily change the size of your grow tent DIY. If you want to build a larger grow tent, you’ll need to buy more PVC pipes, including the corners, Ts, and crosses, as well as extra PVC fittings. In general, choosing PVC pipe is a wise decision to make.
10: $100 DIY Grow Tent Made With An Adjustable Shelving Unit
An adjustable shelf unit is more durable than PVC pipes when compared to the latter. It’s also a good option if you don’t want to waste time putting together PVC pipes. When you utilize a shelf unit, the only thing you have to worry about is the walls and your grow light arrangement. Some indoor growers just use black and white poly as the walls of their grow tents, and this is quite OK. There is no carpentry involved with this project. All you need is a strong adhesive, such as duct tape, to make this project work.
11: Best DIY Grow Tent Ever Build Using Wood And Tarps
Use of wood is another option for constructing the structure of the grow tent. To complete this project, you will need nine pieces of 8 x 2 x 1 wood, which will cost you around $15 dollars. It is strongly recommended that you utilize heavy-duty tarps for the walls of your structure.
12:Simple And Cheap Grow Tent
Another DIY grow tent project that makes use of a reflective sheet can be found on the internet. In order to do this, a window shield covering was used to reflect the light back to the plant. Essentially, it is based on the same concepts and procedures as the ‘$2 DIY grow tent’ that was previously created. All that is left is to hang the window shields around the plants that you have put in this arrangement. The size of this grow tent is determined by the number of reflective sheets you have available.
This approach, however, will not allow you to close the grow tent in the same way that the hula hoop set up did.
This guide is quite innovative, in my opinion. All of the supplies you’ll need are mentioned, and you’ll only need a few hand tools to complete the project. The cost of this setup will be less than $100 in your budget.
This is yet another DIY grow tent idea that makes use of a reflective sheet to enhance its appearance. As a result, the lights were directed back into the plant using a window shield covering. Assembling it is similar to how I erected my $2 DIY grow tent, both in concept and in execution. In order to complete this arrangement, you just must hang your window shields around the plants that you have chosen to place there. Size of this grow tent is determined by how many reflective sheets are available.
However, much as with the hula hoop setup, you will not be able to seal the grow tent with this setup.
This instruction is quite imaginative, in my opinion.
The cost of this arrangement will be less than $100 in your budget for this project.
10 DIY Grow Tent Plans – Build Your Own DIY Grow Box
Indoor gardening needs a great deal more attention and work than outside gardening due to the lack of access to direct sunlight and fresh air. You must learn how to build a grow tent by following these DIY grow tent designs, which will be quite beneficial to you if you want to practice your green thumb in the comfort of your own home. 10 DIY grow tent ideas to build at home that are the simplest and most cost-effective are shown below for your convenience. With the DIY grow tents, you can regulate the circumstances for your plants, such as the amount of light, the amount of humidity in the air, and more.
- Additionally, by using this DIY grow box to offer your succulents with ample light and air, you may help them to become stronger and more resistant to winter damage.
- If you have a large number of plant pots, you will need a large number of storage units, such as a rack or a canvas wardrobe, to store them all.
- The number of LED lights and the size of the cooling fan required for your particular plant is determined by the quantity of light and air that it requires.
- Check out each DIY grow tent concept, along with detailed instructions, in the section below!
1. DIY Grow Tent for Under $100
Create a beautiful succulent garden in the comfort of your own home with this inexpensive DIY grow tent that you can construct for less than $100.
The tent’s fundamental structure is made of a timber frame that is coated with aluminum foil to reflect light onto the plants within. In addition, a cooling fan is provided to aid in the growth of the plants in this handcrafted grow tent. More information may be found here. instructables
2. Grow Tent for Indoor Succulents
Allow your succulents to thrive in all of their health even throughout the winter months by constructing this grow tent for them on your own. A galaxy grows tent of 4X8 feet in size is equipped with aluminum foil, LED lights, a cooling fan, and a thermometer in order to supply the cute tiny plants all the essentials they require to survive. More information may be found here. succulentsands
3. DIY Grow Tent
When you have indoor plants that are subjected to poor environmental conditions, a grow tent is a must-have item. Here’s a simple DIY grow tent that you can make at home to give your dying succulents or other indoor plants the nourishment they require. You’ll need poly to wrap over the rack, as well as lights and a thermostat, as well as a cooling fan, to put it all together. More information may be found here. ledgardener
4. How to Make Grow Tents
You no longer have to spend a fortune on grow tens that are purchased on the market. Here’s a simple DIY construct tent design that will allow you to save money while still having a good time doing it. This gorgeous bulb, PVP plumbing, ventilation, and Mylar are all you’ll need to create this simple grow tent. More information may be found here. leafbuyer
5. How to Assemble Your Own DIY Grow Tent
What is the best way to create a grow tent? Growing your favorite indoor plants during the winter months, when there is less light and fresh air available, is simple with this easy DIY grow tent you can create yourself. A rack is a fundamental construction that will be addressed in Panda film. Pick up four LED lights and a fan and attach them together with Velcro cord to complete your project! More information may be found here. everythingba
6. DIY $33 Grow Tent
What is the best way to construct a grow tent? Here is a DIY grow tent that you can create for as little as 33 dollars, which is the lowest you can get. Use a canvas wardrobe and coat it completely with the Myler spray paint. In only a few minutes, yourDIY grow boxor tent will be complete with LED lights and some wooden strips attached to the foundation. More information may be found here. thctalk
7. Cheap DIY $2 Grow Tent
You can make an incredible DIY grow tent at home for a low cost, and that too for an unbelievable price of only two dollars. You’ll need a shelf rack as well as a large amount of aluminum foil to wrap the entire thing. You will next need to install some LED lights and fans to ensure that your plants receive the necessary light and air when the weather conditions are not ideal. More information may be found here. youtube
8. Building a DIY Grow Box with PVC
You may safeguard your plants inside the house by building your own DIY grow box out of PVC when you are unable to place them outside due the very cold weather conditions. In order for the lights to reflect evenly on the plants throughout the space, you’ll need a box or shelf unit that you can cover with a reflective sheet. If they require more ventilation, you may also include a fan. The PVC grow tent is described in detail here. youtube
9. Homemade 4 Tray Grow Tent for Under 50 Bucks
Even on clear sunny days, your indoor plants may struggle to get enough light, especially when the sky is overcast.
Here is a proposal for a four-tray grow-ten that can be built for less than $50 dollars, as presented by us. Reflective foil, bulbs, and a wooden rack to hold the plants are also required in addition to the list of essential supplies. More information may be found here. youtube
10. DIY Grow Tent
With this DIY grow tent, you can provide your indoor plants with the most suitable circumstances for the best possible development. You can quickly and cheaply construct a DIY grow tent using simple and inexpensive materials that you already have on hand. The reflective sheets, the thermostat, and the cooling fan are the three most important components of this DIY grow tent. More information may be found here. youtube
- How to Make a Low-Cost Air Filtration System with 10 DIY Air Purifier Ideas
- DIY Cedar Planter Box for Under $5
- 25 DIY Mason Jar Herb Garden Ideas for Indoors
- 17 Easy DIY Garden Tool Storage Ideas
- DIY Cedar Planter Box for Under $5
- A Guide to Building a Raised Garden Bed (The Ultimate Guide to Beginning Gardening)
How to Make Your Own DIY Grow Tent & Box
While the United States’ path toward cannabis legalization has brought forth a slew of positive outcomes, we believe that the spread of homegrown marijuana is among the most significant. As more states pass legalizing legislation that allow for personal marijuana cultivation, geography, weather, and residential constraints are forcing many prospective home producers out of their gardens and into their garages, basements, and closets instead. Just because your flat does not have the same amount of land as a farm in theEmerald Triangle does not rule out the possibility of growing your own marijuana.
Why build a grow tent?
To grow marijuana inside, you’ll need a source of natural illumination. All things considered, the entire concept of indoor growing has been developed to imitate and improve on the benefits of natural sunshine. And while outside plants are well-known for their tendency to grow like weeds, the primary advantage of growing plants indoors is the ability to regulate every aspect of the plant’s habitat. Growing plants inside is all about establishing a micro-environment for your plants to thrive in.
In this case, the use of a grow tent is necessary.
Growing plants inside is all about establishing a micro-environment for your plants to thrive in.
What material do you need for a DIY grow tent?
The cannabis grow sector is growing as a result of the legalizing green rush. For those who don’t have the time or energy to construct their own grow tents, there are plenty of reasonably priced pre-built grow tents on the market to choose from. If you’re determined to build your own grow tent, the first step in organizing your materials is determining the frame and size you’ll need. Growing tents have traditionally been constructed of PVC tubing or wood for their structural frameworks. Using a ready-made wire rack for your grow tent frame, on the other hand, is by far the simplest alternative for those who are new to carpentry.
- A conventional 36″ x 12″ x 54″ shelving unit is ideal for storing 1-2 plants, however a larger 36″ x 24″ x 54″ rack has the capacity to hold three or four tiny pots in a single row.
- LED grow lights have seen significant technical advancements in recent years, making it more affordable than ever before to purchase a high-powered, full-spectrum light of great quality.
- The “tent” portion of your grow tent is the next piece of equipment you’ll need in order to keep the light concentrated and reflected as much as possible onto your plants.
- Reflective space blankets and layers of black garbage bags may be used to create a low-cost rack cover by layering them together and sewing them together.
- As well as one or two tiny fans (clip-ons work well), a ventilation fan, a short piece of ventilation ducting, several zip-tie knots, several rolls of duct tape, a couple of magnetic or Velcro strips, and an automated timer for your lights, you’ll need a few more supplies.
Here’s a checklist of everything you’ll need to make your own grow tent, just in case you forgot what you needed:
- Prepared wire rack (36″ x 12″ x 54″ for 1-2 plants or 36″ x 24″ x 54″ for 3-4 tiny plants)
- Ready-to-use potting soil
- Ready-to-use potting soil In addition to LED lights, you’ll need black and white panda film or one-sided mylar wrap, as well as one or two tiny fans, a ventilation fan, ventilation ducting, zip ties, duct tape, magnetic strips, and an automated timer for each grow light.
Simple steps to make a DIY grow tent
Assembly of your grow tent’s structure, or in this example, its wire shelving rack, is the first stage in the process of building your grow tent. Once you’ve installed a top shelf from which to hang your lights and a bottom shelf to support your plant(s), rope your lights below the topmost shelf using zip ties or a wire hanging kit to keep them from falling off. Your cables and timer should be secured to the rack’s frame with zip ties and duct tape. Create a circulation system with your fans to circulate the air and direct any heat created by the lights to the top of your shelf.
- Make certain that there are no light leaks and that the wrap you choose forms a floor and a roof to completely enclose the structure, since the tent is designed to keep all of your light inside, reflecting, and focused on your plant.
- The interior of the tent will require access in order to hydrate and feed your plant(s), alter the light height, and, eventually, harvest your buds, so ensuring sure your entrance is both accessible and light-sealed is critical.
- Make a hole in the top quarter or roof of your tent and connect your ducting to the exhaust fan.
- If you’re really concerned about the odor of your indoor grow, consider installing a carbon filter in the center of your exhaust system.
- After you’ve put all of your equipment together, choose your favorite seeds or clones and sit back and watch your new garden take shape.
12 DIY Grow Tent Ideas For Indoor Gardeners
Growing in a grow tent is similar to growing in a greenhouse, but with LED lights and other amenities. It creates a portable, ideal environment for seedlings and plants to grow in the house. You may use it to manage the lighting, heat, and air circulation in your home, as well as cultivate plants throughout the winter months.
You can choose any of these tutorials and do as directed to make your own functional DIY grow tent at an affordable cost.
Running your LED grow lights in the open air may waste their potential, but with the aid of a grow tent, you can increase that potential even more. Find out how to create one right here.
2. Own DIY Grow Tent
According to this post, even a complete newbie can construct a grow tent, and you may learn how to do so by following the steps below.
3. DIY: £25 Grow Tent
You can easily convert a canvas closet into a DIY grow tent with the aid of this instructional video. You may get it from any home improvement store or order it online.
4. DIY Grow Tent with PVC Pipe
With the aid of this YouTube guide, you can construct a practical grow tent that is equipped with DIY LED grow lights.
You may also be interested in:LED Grow Lights You Can Make Yourself
6. Grow Tent for Indoor Succulents
If you’re a dedicated succulent grower who finds that the cold winters are killing your plants, consider investing in a grow tent. This article from Succulent and Sunshine discusses the advantages of growing plants in a grow tent. Take a look ithere!
7. Cheap $2 DIY Grow Tent
If you’re on a tight budget, give this $2 grow tent idea a shot. It’s 100 percent efficient and will save you money.
8. DIY Grow Tent for Indoor Plants
With the aid of this instructional video, you can easily construct this grow tent. Use it to hold 2-3 small potted plants or a large plant such as a lemon tree in a huge pot. Also see: Do It Yourself Living Wall Projects
9. DIY Wooden Grow Tent
This wooden grow box not only looks excellent, but it also performs well. You may start seeds in it with relative ease in late winter or early spring, without having to wait for the right conditions to come around first. The instruction may be found at this link. Also see: Under Stairs Indoor Garden Design
10. DIY Complete $300 Budget Grow Tent
Construction of a well-equipped grow tent from the ground up that is both functional and attractive on a $300 budget
11. DIY Grow Tent from Old Storage Rack
Tin foil, LED strip lights, and an old storage rack are used to create this DIY grow tent for germinating seeds. It is inexpensive and easy to make. We discovered the inspiration right here!
12. PVC Pipe Grow Tent
This PVC pipe grow tent is both lightweight and portable, as well as being reasonably priced. You can find out how to grow eithereandhere.
Build a DIY Grow Tent for Under $100
If you’re going to the hassle of designing and creating your own grow light system, you may as well put all of those idle photons to good use while you’re doing it. The amount of light and growth potential that is squandered when your lights are left on in the open is astounding. After constructing the DIY grow tent, I made a pretty inaccurate assessment of the amount of light that was hitting my plant shelf before and after, and the change was dramatic. Edited on June 18th, 2017: The following is a second tent I constructed using the same black and white poly, this time in conjunction with some scrap wood I had laying about.
Advantages of Using a Grow Tent
In the event that you’re going to the bother of designing and creating your own grow light system, you may as well put all of those idle photons to use. The amount of light and growth potential that is squandered when your lights are left on in the open is astounding. After constructing the DIY grow tent, I made a very unscientific assessment of the amount of light that was hitting my plant shelf before and after, and the change was dramatic. On June 18th, 2017, we made the following changes.
- The temperature of your growing space may be more precisely controlled
- You will be able to better manage the humidity in your growing space. Reflective walls of a tent will re-direct an incredible amount of light back towards your plants, which would have otherwise been lost. In the absence of reflective film and with only a plain old wire shelf, I was able to get around 6700 Lux (Lumens per square meter).
While in the same posture and at the same distance from the lights, but with the reflective lining in place, this measurement climbed to more than 24,000 Lux in the same area. It’s important to note that Lumens, Lux, and Footcandles are not appropriate units of measurement for horticulture lighting since they are skewed towards the yellow and green spectrums of light, which people perceive as the most intense and visible. A more accurate indication for plants is a measurement of PPFD (Photosynthetically-active Photon Flux Density), which is measured in umol/second/meter squared (photosynthesis-active photon flux density).
Having said that, pre-fabbed grow tents can be prohibitively expensive, especially in large quantities. Fortunately, it is possible to construct a DIY grow tent for a reasonable price. Here’s how:
Here is a list of the materials you will need to construct your DIY grow tent:
- A movable rack to hold your lights and plants, such as the one seen here: AmazonBasics 5-Shelf Shelving Unit – Black
- AmazonBasics 5-Shelf Shelving Unit – White
- AmazonBasics 5-Shelf Shelving Unit – Gray
- AmazonBasics 5-Shelf She This is an example of high-quality, durable tape: Gorilla Glue 6003001 ToughWide Tape
- Polypropylene in black and white. In order to keep light contained within the tent, the white side reflects it, while the black side absorbs it. Here’s the one I ended up using: Poly in black and white
- You’ll need some Velcro or cable ties to keep your wiring organized.
I designed my little tent with the purpose of making it as simple as possible to set up. Here’s how I went about it: 1. Assemble your rack according to the instructions. Make use of as many shelves as you believe you will require. I’m going to start with all four of my lights on one shelf in my rack while the seedlings are still young to see how it works. Once the plants have taken up more space, I’ll relocate two of my lights to the bottom shelf and divide the plants between their old shelf and the new area on the ground, as needed.
- Because I needed to make room for my lights, I cut off sections of the shelves to allow the lights to lie flat on the shelf: Three bars were eliminated so order to accommodate the LED comfortably.
- Connect your wiring to your lights (read this page for instructions on how to wire your LEDs!).
- I used Velcro to attach the wire to the post on the sides, as seen below: Everything is connected to the lights.
- Open the package of black and white poly and drape it over the rack.
- Fortunately, I was just dealing with a 10-by-10-foot sheet, so it was doable, but this stuff comes in much larger chunks.
It is necessary to line two edges of the poly with two edges of the rack – the top edge and one of the side edges – in order to decrease waste and maximize efficiency.
You should have a substantial amount of slack hanging at the bottom of the rack (see below pic).
In the photo below, I have lined the poly edge with the top of the structure and with the front right post (note how much slack is left on the left side – this will be cut off and used as a door in the future).
5.Tape the poly to the top shelf with double-sided tape.
Once the poly is taped to the top shelf, take the slack at the bottom and tuck it under the four feet of the shelf so that the bottom is also covered.
Bring in the poly to a tight fit so that it wraps around the back of the rack and both sides, leaving the front exposed as the only piece that is not covered.
Now that the top and one side have been taped, trim the extra material from the remaining side and attach it to the front post of the frame as well.
I won’t condemn you if yours doesn’t look very attractive; mine was hideous.
Remove any surplus material that has risen from behind the shelf rack.
Everything is finished – all that is needed is a door.
Using the excess wood you removed from the side, construct your door.
Make use of your surplus fabric by draping it over the top of the garment rack.
Once it’s hung, you’ll be able to assess how much you’ll need to trim it down to make it fit properly again.
I didn’t have to take much off.
It’s been taped down.
When the door is closed, make sure it is completely sealed.
If you want to go fancy, you could use magnets.
Turn on your lights and check the temperature and humidity levels in your tent before proceeding.
The temperature in my basement is low, so I plan to keep everything pretty tightly shut in order to use the heat created by the lights to warm up the inside of the tent.
Consider using a fan at the bottom of the room to circulate air up and through the ventilation vents (fans are always a good idea anyway, in order to move air and make the seedlings stronger).
That’s all there is to it!
For less than a hundred buckaroos, you can get your hands on a nice tent that can significantly boost your growing space’s light and control over growth conditions. If you have any great suggestions for how to make this better, please share them with me in the comments section below.
How to Make a Marijuana Grow Tent for Just $2… [Say WHAT!?]
This page was last updated on July 25, 2019. 5 minutes to readVideo It is generally accepted that purchasing a grow tent will result in a large financial investment. Consider the expense of a 3′ by 3′ tent, which may run you roughly $200. It should be sufficient to accommodate around four plants. However, if you are in a financial bind, a couple of hundred dollars is a substantial sum of money. In certain places, you can acquire a complete ounce of mid-shelf marijuana for that amount! We just stumbled upon a YouTube video from HowToHydroponics that we thought you would like.
- When you consider the typical cost of a grow tent, it’s no wonder that the title drew our attention.
- This kit contains nothing more than some inexpensive fluorescent emergency blanket material and a dollar-store hula hoop for hula hooping.
- Are you searching for a simple 420-weekend project that you can complete in a weekend?
- You should read this step-by-step instruction if you answered yes to either of the previous questions.
How to Make the Cheapest Marijuana Grow Tent
If you want a written explanation of what is going on in the video below, please see the following document. The speaker appears to be quite enthusiastic about what he is about to say. He gave credit to a fellow called Cody from the Nukeheads for inventing this ingenious approach to create an inexpensive tent for him. It is possible to construct a grow tent for about $2 and a few common home objects, according to him. Consequently, if you don’t have certain items, it may be necessary to pay an additional fee.
He believes that this technology enhances the efficiency of light.
Do not bother continue if that is what you desire since the results will be disappointing!
(The HowToHydroponics YouTube channel and Cody at Nukeheads.com are to be credited with the inspiration for this.) All you need is a hula hoop and a reflective blanket material known as Mylar to do this activity.
Make certain that the hula hoop is large enough to go around your light fixture before beginning. This is due to the fact that you will hang the Mylar from it, which will surround the light and increase its efficiency.
Test Your Light Without a Grow Tent First
The concept behind the DIY cannabis grow tent is straightforward. Hang a hula-hoop with some thin reflective sheet material wrapped around it and place your grow lamp inside. After that, position your plant in direct sunlight. Your first step, however, should be to utilize a PAR meter, which measures various wavelengths of light within a certain range of wavelengths. Nanometers are measured between 100 and 700 nanometers using the instrument used in the movie. For the sake of simplicity, all that has to be remembered is that a higher value indicates that more light is available to the plant.
Twelve, eighteen, and twenty-four inches are measured by him.
Using the three distances listed above, the following is how the light contrasts with and without the Mylar:
|Distance||Without Mylar||With Mylar||Estimated Light Efficiency Increase with Mylar|
|12 Inches||451 PPFD||620 PPFD||37%|
|18 Inches||230 PPFD||405 PPFD||76%|
|24 Inches||134 PPFD||298 PPFD||122%|
He repeats the test and has a reading of 304 PPFD at 24 inches with the Mylar this time around. He receives a PPFD value of 140 when the reflecting material is not used. Your grow operation’s photosynthesis will benefit substantially from the reflecting Mylar, as you can see in the illustration. This enhances the likelihood of producing larger, more robust nuggets. It appears to be very straightforward, doesn’t it?
Too Good to be True?
There are some clear “flaws” in the video, which have been pointed out by viewers. Some pertinent questions have been raised by viewers, including the following:
- How can you go to the plant in the most convenient way? What is the best way to set up airflow and ventilation? Do you think the plastic hula hoop will melt?
All of these queries are reasonable in nature. However, beggars can’t be choosers when it comes to a $2 marijuana grow tent that enhances your light efficiency by more than 100% and costs less than $2.
Does the Cheapest Marijuana Grow Tent Really Only Cost $2?
The chances are that you’ll pay a bit more than $2 if you go to Wal-Mart to acquire your “materials.” The person in the video is from Canada, according to the credits. He states that he purchased both the fluorescent blanket and the hula-hoop for around CAD 2.50 from a dollar store. At the time, that amounted to around USD 1.95. On special sale at Wal-Mart, you can acquire an emergency luminous blanket measuring 82.5 inches by 52 inches for roughly $1.50. Hula hoops are readily available at your local dollar shop.
For that amount, having the potential to boost the bud production on a single marijuana plant is a fantastic value!
How to Build the Cheap “$2” Grow Tent for Weed
When it comes to constructing your own DIY marijuana grow tent, you’ll have to rely on your own initiative and “creative engineering” abilities. He has his contraption put up on a Slatwall panel in the style of the ULine system in the video. However, for those of you skilled DIY aficionados out there, there are undoubtedly alternative solutions available. A large number of high-quality LED grow lights are intended to be suspended from thin wires. Consequently, you’ll need to devise a method of attaching the hula-hoop to the light.
Duct tape was used to hold the sheet in place by the person in the video.
There have been some concerns expressed that the heat generated by the light will almost certainly melt the hula-hoop and/or the reflective blanket.
However, if you’re utilizing LED lights, you won’t have any problems because they produce very little heat. Have a good time with it and be imaginative. Lastly and most significantly, be grateful that someone discovered how to build an inexpensive marijuana grow tent for only a few dollars!
Final Thoughts on Building a $2 Marijuana Grow Tent
Regardless of whether you spend $2 or $200 on a grow tent, you must be aware of the basic prerequisites for success. Cannabis cultivated indoors requires high-quality seeds as well as a regulated atmosphere. The following are the criteria that you must maintain control over:
- Light: Make sure the grow tent is completely lightproof in order to manage the amount of light that reaches the plants. The marijuana plant must be exposed to 12 hours of continuous darkness every day in order to get to the blooming stage. For this procedure, a combination of LED grow lamps and Mylar is most effective. When it comes to the $2 grow tent, airtightness may be a concern. It is preferable if you can set up an airtight tent to keep the scent of the plant and the temperature and surroundings within reasonable limits. It may be worthwhile to get additional Mylar and duct tape to patch up any gaps that may exist around your plant’s perimeter. Climate: Cannabis plants thrive in a temperature range of 68 to 77 degrees Fahrenheit on average, with the exception of extremely cold climates. The Mylar should assist to retain the heat in, and the LED lights should keep the temperature at an acceptable level. However, you may find that you need to get a thermometer just to keep a check on things. Moisture: You should think about getting a humidifier as well as a humidity sensor for your home. According to standard guidelines, the humidity level in a grow room should not be more than 70 percent when the plant is in the early vegetative stage. Reduce the pressure gradually as the plant grows. In order for the plant to reach its late flowering stage, the relative humidity (RH) of the room should not exceed 40%.
Please report back on your experience if you attempt to build a $2 grow tent! Leave a detailed summary of your experiences in the comments area of this page.
DIY Grow Tent: How to Build the Best Grow Tent
Growing marijuana indoors may be a gratifying experience, especially if you use a specialized grow box or tent for your harvest. If you do not build your own, though, both of these solutions might add to your expenditures. Are you in the mood to be creative? Learn how to build the greatest do-it-yourself (DIY) cannabis grow tent and why you would want to use one in this tutorial.
What is A Grow Tent?
While it is true that marijuana is a plant that can thrive in almost any environment, you don’t want it to just survive for the sake of it. You want your plant to flourish, after all. The use of a grow cabinet or tent might make this procedure more convenient. More information about grow tents may be found in my free marijuana grow bible.
- Create a successful grow with my Quick Start Guide
- Learn the secrets to producing large yields
- And avoid frequent grow blunders.
Grow tents or cabinets provide you with the convenience of being able to control:
- Temperature of the plant
- Relative humidity of the surrounding environment
You might imagine that a grow tent or box is the size of a backyard greenhouse. This is incorrect. In addition, although some tents or boxes are that size, agrow space can be compact enough to fit in a tiny cabinet or drawer. Some cabinets, on the other hand, are huge, with some cabinets serving as asgrow rooms. For the most part, you don’t need a backyard to set up a growing tent. As a matter of fact, one of the greatest designs for DIY cannabis grow tents are tall, compact tents with reflective inside walls that are small enough to fit into most coat closets, as seen below.
A grow tent has a cloth or plastic exterior, whereas a box has a solid outside.
There are many other methods to construct grow setups, but we’ll focus on the most common ones because they are the most straightforward to construct.
Building a DIY Grow Tent: Shelving, The Easiest Method
The adjustable rack or shelving approach is used to construct this homemade cannabis grow tent. To construct an adjustable rack, you’ll need the following materials:
- A fan, four LED lights, duct tape, Velcro or cable ties, black/white poly, and an adjustable shelving system are all required.
Using shelves, you may make your own grow tent. Greenhouses and grow rooms can benefit from the usage of black and white polyethylene to line the walls and flooring. The fact that it regulates light makes it an absolute must-have material for your grow tent! The side of the material that is white reflects light. It is absorbed by the dark side. Instead of building a PVC pipe rack from scratch, we recommend utilizing an existing rack or purchasing an adjustable shelving system. This saves you a great deal of time and effort.
The only disadvantage of the shelf approach is that it has height restrictions. You’ll have a difficult time cultivating tall sativa marijuana strains in one of these containers.
Shelving Method: Supplies and Tools
Listed below is all you need to know about putting together your own adjustable shelf system:
Adjustable Shelving System
Growing your plants and using grow lights is made easier with the rack. It is necessary to position your grow lights on the second level, while your seedlings are placed on the third shelf. Once you see signs of growth in your plants, you may add two lights to the fourth shelf and divide your plants between the third shelf and the bottom of the tank.
Get a tiny fan to help with the airflow in your DIY grow tent. Your ideas will heat up as well, so keep the interior cool.
The duct tape aids in tying your wires together into a nice and unified line, while the velcro secures the cables to the wire rack itself. Keep your grow environment free of cables to save yourself the trouble and annoyance of having them around. Duct tape is a type of adhesive that is used to seal ducts.
The polyethylene in black and white is the star of your grow tent. The white side of the grow tent reflects light back into the tent, increasing the amount of light reaching your plants. The dark side of your grow tent serves to absorb light from the outside, which helps to maintain a consistent temperature within the tent. Polyethylene film in black and white
Your plants require exposure to light. You may save money by using fluorescent lights to illuminate your plants. Do you have a lot of money to burn? The use of LEDs will make a significant difference in your arrangement.
Building a DIY Grow Tent: PVC Piping, The Cheapest Method
There is a simple and economical technique of building your own grow tent. PVC pipe should be used for the frame, and black/white poly should be used for the drapes. In comparison to the shelf approach, it is less expensive and simpler to construct. Aside from that, you may build the frame to any height you desire if you want to grow tall plants within. To construct your frame out of PVC pipe, you’ll need the following materials:
- Pipe made of straight PVC
- PVC fittings
- A PVC cutter
- Duct tapeVelcro
- Black/white polyurethane foam
- Grow lights
A PVC pipe system was used to construct this DIY grow tent. The PVC fittings are essential in the construction of the tent’s structure. We’ll get into PVC fittings a little later. Make sure you have all of your items together before cutting your straight PVC pipes to the lengths you wish. Three-way elbows are used to join them together. Tees and crosses PVC fittings will be used to construct a 22 grid on the top side of the frame, which will be attached to the frame with screws. Grow lights are mounted on the grid, which you can see in the picture above.
The disadvantage of utilizing PVC pipe is that it needs a significant amount of effort to transform it into a fully functional grow tent.
PVC Method: Supplies and Tools
Here’s all you need to know about constructing your grow tent with PVC pipe.
Straight PVC Piping
PVC pipes that are straight The majority of the frame will be constructed out of PVC pipes. The length of PVC you use will be determined by how tall your plants will eventually grow.
Fittings made of PVCThe type of fittings you use is very essential. PVC Fittings are tiny connectors that join the corners of PVC pipes together and allow for many connections to be made at the same time.
When the pipe is used as a frame, the fittings are what keep the various sections of the pipe together. Check to see that you have the proper number of each category on hand. When putting up the frame, you’ll need eight 3-way elbows, four Tees, and one Cross PVC pipe to complete it.
A PVC cutter should be used to cut the length of the PVC pipes to the desired length. In addition to the cutter, you may want to use Gorilla Glue or PVC cement to help bind your frame even further. Wearing protective equipment, such as hardware gloves and safety eyewear, is also recommended before starting any project.
In a grow room, fans are used to circulate air. It is possible that installing a fan in this sort of grow tent will make the difference between having the optimal growing environment and having a hellish climate that will impede the growth of your plants.
As well as for wire management, you’ll need duct tape and velcro to attach the black/white poly to the PVC frame and to cover the opening of the grow tent, which will be sealed with velcro. You’ll have a means to see your plants while yet keeping a light-tight container in this manner.
When using the black/white poly sheets, you do not line the walls of a closet with them as you would with the shelving approach (or place the black/white poly sheets over the shelf), but rather they become the walls of a closet and adhere to the PVC frame.
Due to the fact that your grow tent is totally contained, you’ll need to provide light for your plants as well. It is at this point when grow lights come into play. Although fluorescent lights are effective, we recommend that you use LEDs instead in order to get the most out of your set-up. Also see the Best Indoor Grow Lights for more information. If you intend to cultivate cannabis indoors, you will almost certainly need to investigate the various grow lights that are available. Learn about the many lighting alternatives available, as well as a few basic principles that are applicable to every lighting system.
Should you choose Mylar or Panda foil?
Let’s start with a brief explanation of what Mylar and Panda Foil are. The sheets are made of polyethylene and are used by growers to line the walls of their grow rooms as well as to construct curtains and walls for their grow tents. The material reflects light, which is exactly what gardeners are looking for in order to optimize the output of their fluorescent grow lights. A sheet of mylar And Mylar, in particular, is the most reflective polyethylene sheet available. Mylar, with its diamond pattern and silver tone, may have a reflectivity of 90-95 percent due to its reflective properties.
Additionally, growers appreciate Mylar for its tensile strength (the capacity to withstand weight and stress) as well as its ability to trap gas and scent within grow environments.
Despite the fact that it is excellent for lining the walls and ceilings of a grow closet, it does not have the tensile strength of plastic poly (such as Panda Foil).
Last but not least, Panda Foil is less expensive than Mylar. Panda Foil, on the other hand, is stronger and more flexible than Mylar, despite the fact that it is not as reflective. That is why I propose that you use Panda Foil while putting together your grow tent.
Step-by-Step: Building Your Own Grow Tent
Putting together the rack for your DIY grow tent will take around 20 minutes. The DIY grow tent instructions for the PVC approach are outlined in the following sections.
- Assemble the Rack by yourself. Build a shelf out of PVC pipes, or create a ready-to-use shelving system using the components you already have. Your top shelf should be broad enough to accommodate lighting while still being high enough to allow room for your plants to flourish. We also propose that you make your shelf detachable in case your plants grow to be far taller than you anticipated. Tie any stray cables to the tent’s structure with cable ties or velcro to keep them in place. The Best Place to Put Your FanPlace your fan beneath your shelf system. In order to readily access the power switch, make sure the fan is positioned such that it is easily accessible. Alternatively, spend a little more money and purchase a remote control fan. Place your polyethylene on a hook. Drape your poly over the pipe frame or shelf system to keep it from getting damaged. Make certain that the black side is facing outwards. Assemble the top shelf by placing one of the poly edges onto the shelf and one edge on each of the shelves’ sides. For the time being, leave any surplus material that has accumulated on the ground. Tape the top edges of the poly to the top shelf with double-sided tape. Trim the edges of the sides and secure them with tape. After that, clip away any excess material that is hanging at the bottom. To close off the tent’s remaining exposed side, construct a doorway out of any leftover polyethylene
- Make alterations to your tent. You’ve completed the difficult task. The exciting part is about to begin. Make any necessary adjustments, such as changing the temperature and humidity settings. The top of the tent should have a few air holes cut into it in case the temperature gets too high.
Buy Indoor Seeds
- You can grow whatever you want anytime you want
- Control the lighting and temperature
- Increase the speed of harvesting.
FAQs About Grow Tents
Are grow tents resistant to fire? Grow tents can catch fire, especially if they are not kept clean, if they are not made of high-quality materials, or if they are not constructed properly. Aside from that, efficient control of electrical components such as lights and fans may also assist in the prevention of fires. Is it possible to use a grow tent in the rain? Yes, the inside of the majority of high-quality grow tents are waterproof. Don’t forget to take into consideration the flooring! Are grow tents impervious to odors?
Increased seclusion may be achieved by strategically placing the grow tent and carbon filter in the appropriate locations.
With an indoor grow tent, you have complete control over the temperature and humidity of the plant, as well as the intensity of the illumination.
Have you ever attempted to construct a homemade grow tent?
Best of luck with your growth!