How To Level A Tent Trailer

How To Level A Pop-Up Camper

When you have a single axle trailer or one of the large RVs available, leveling your rig is essential to keeping you comfortable and everything operating smoothly. If you don’t level your camper, you’re not going to be as comfortable as you could be. If you sleep at a downward angle, you run the risk of experiencing headaches as a result. Some sections of your RV, such as the refrigerator on many models, must also be level in order to function properly and effectively. It’s possible that your greatest choice for leveling a pop-up camper is different from another RV owner’s best option.

For those of you who are unfamiliar with how to level a pop-up trailer, the following instruction will assist you in understanding how to do so.

Continue reading, and you’ll see a picture of what I mean!

Thank you so much for your assistance.

Types of Leveling Tools

Before you can begin learning how to level a pop-up trailer, you must first grasp the instruments that will be required to do the task.

Jacks and Stabilizers

It is possible that you may want a jack or a stabilizer in order to stable and level your trailer. In terms of variety, there are several options accessible on the market. We’ll go through a couple of them in a minute. Class B campervans are an exception to this rule. The majority of them are leveled by resting the wheels on blocks or planks. That, however, is a topic for another conversation. We’re going to speak about how to level a pop-up camper trailer in this article.

Tongue Jack

Hitch jacks, also known as tongue jacks or trailer jacks, are devices that are used to raise and support tent campers on trailers. These items may be used to help attach a camper to a trailer tow vehicle, but they can also be used to level a pop trailer from the front to the rear. Thus, you will not be continually learning or rolling in one direction when you are attempting to fall asleep! Tongue jacks are a lift system that is mounted at the front of the trailer, on the “trailer tongue,” that allows the front of the trailer to be raised and lowered.

Typically, the power is connected to the trailer’s onboard batteries to provide electricity.

Stabilizer Jacks

Known as stabilizer jacks, these metal arms are attached to the corner frames of your camper and provide additional support for your camper’s weight. When not in use, it is intended to extend from the frame to the ground, so supporting and leveling the structure from side to side when not in use.

On the other hand, you want to be certain that the jack is completely retracted into the frame before hitting the road. Once you have parked your vehicle, extend your tires till they are in touch with the ground. Do you want to see what they look like? Here’s everything you need to know.

Leveling Blocks

In their most basic form, leveling blocks function as little ramps for the tires of your trailers to rest on. They are installed beneath the front tire, preventing the trailer from rolling or moving if it is not placed on level ground, as well as raising and lowering the camper. While most leveling blocks are made of plastic and resemble a gigantic Lego block, a block of wood under the front of the tire is preferred by some RVers because it is more effective than using a block of wood. This is due to the fact that they are intended to be stacked and connected in order to build a gradual ramp for your automobile.

When it comes to leveling blocks, wood blocks are not always the best option due to the fact that they are only available in a single size.

Wooden blocks are prone to slipping.

Levels

Having stabilized your trailer, it is a good idea to check that it is level before proceeding. You’ll be able to tell if you need to elevate or lower one side of the trailer a little bit as a result of this. Adding a few inches of height to the lowest tire can make a significant impact in handling. The use of a level is the most effective technique to guarantee that your tent trailer is leveled properly. Sometimes a camping location that appears to be flat and even is not in fact flat and even.

  1. An connected level is usually found on both sides of the trailer, one in the front or back and one on one side.
  2. If you don’t already have any, you’ll want to invest in one or two to use to level your trailer.
  3. They are available in a variety of sizes, ranging from a little level to a very huge level.
  4. Make sure you choose one and have it in a convenient location in your trailer because it will most likely be the first thing you do when you arrive at your destination and park your trailer.
  5. Bubble levels should be used for the levels that you purchase or that are already linked to the trailer.

Maybe you need a hat to do this?

Who needs a hat in this situation?

Yes, you do! The 6-panel cap, which is made entirely of cotton, has a lightweight feel, and the adjustable strap assures a secure and comfortable fit. Wearing this shirt on your next RV Lifestyle journey will be perfect.

How to Level a Pop Up Camper

This Coleman Popup was the vehicle that my family and I used for camping trips back in the 1970s. That’s our favorite site along the Rifle River in northern Michigan, and we’ve been there several times. The method of leveling your trailer consists of two steps.

Step 1: Raise and Lower

Raising or lowering each side of the trailer in accordance with the manufacturer’s guidelines should be done once you have decided on a leveler of choice (such as a jack or leveling blocks). The majority of levelers will consist of placing the leveler beneath the tire or stretching it down from under the RV and turning it to the appropriate height with the hand. Many will tell you to turn the dial to “0.”

Step 2: Check the level

Check to determine if the trailer is level by looking at the bubble level. Check both the front-to-back and side-to-side levels of the trailer to ensure that they are equal. The majority of trailers are equipped with an attached level on both sides of the trailer itself. If you see that you are out of plumb in one direction, you should alter the leveler you are currently using (jack or leveling blocks). Check the bubble level once you’ve made the necessary adjustments. Continue until you reach the desired level.

4 Best Trailer Toolsfor Leveling

If you are in need of a leveler or a level, I strongly advise you to check into these goods.

1.BAL Leveler

A BAL leveler is a fantastic tool for getting your camper leveled. It works to level your single axle or pop-up trailer in minutes by being fitted around your tire on the low side of the trailer. It is available in a variety of sizes. To finish, use the ratchet to raise the low side–and you’re done! It also serves as a tire chuck, which helps to hold the trailer in place, and it is corrosion-resistant, which helps to keep it protected against the weather.

2.Andersen Levelers

When it comes to leveling your trailer, a BAL leveler may not be the best option for you. Instead, consider Andersen Levelers. In order to raise one side up to four inches, they feature graded levelers that are placed under your trailer wheel. They may be used on trailers weighing up to 30,000 pounds and with tires with a maximum diameter of 32 inches.

3.Hopkins Graduated Level

Hopkins Graduated Levels are simple to install if your trailer does not already have levels installed, or if the levels on your trailer are in need of replacing. They are self-adhesive and come with optional screw holes for fixing them permanently if you so choose.

4.Kohree 2 Packs Camper Leveler

It can accommodate a vehicle weighing up to 30,000 pounds and tires with a diameter of up to 32 inches. It is possible to remove up to 4 inches from the leveler without causing any adverse consequences in order to accommodate two axle RVs. We’ve combined our best-selling Upper Peninsula RV Adventure Guide with our newest adventure guide, The Great Lakes Shoreline Tour. Both publications will provide you with a plethora of ideas and resources for exploring this portion of the United States. The Great Lakes Shoreline Tour – This tour takes you along the shorelines of the Great Lakes.

It is a journey of more than 4,000 miles that takes you across eight states!

RV Adventure Guide for the Upper Peninsula — “Where is one of your favorite RVing destinations in the United States?” is a question we are frequently asked. “The Upper Peninsula of Michigan,” we unanimously declare as our solution. Of course, the “UP” refers to the Upper Peninsula of Michigan.

Explore this Bundle and plan your next trip!

One aspect of a tent trailer that I particularly love is the impression of space created when all of the curtains are drawn back and the windows are opened. You enjoy a 360-degree view, and the windows are covered with netting to keep insects out. Even in extremely hot weather, the covered interior is significantly cooler than the outside, and there is plenty of airflow. When compared to a travel trailer, 5th wheel, or motor home, tent trailers require a bit more effort to set up. It is astonishing how many individuals are unfamiliar with the right way to put up their tent trailer, despite the fact that the Owner’s Manual has thorough instructions on the subject.

When it comes to setting up a tent trailer, I highly recommend the BAL Light Trailer Leveler and the BAL Single Axle Tire Locking Chock, both of which can be found on Amazon.

  1. Returning to the camping location
  2. Circumambulate the trailer and release all of the roof locks
  3. Prepare the Patty O Mat by spreading it out. The BAL Single Axle Tire Locking Chock is used to lock the high side wheel in place. Install a 6-inch level on the rear bumper to check that it is level from side to side
  4. In order to level the camper from side to side, place the BAL Light Trailer Leveler beneath the low wheel and lift it with an 18-volt portable electric drill until the camper is level
  5. Raise the trailer tongue to a height that will allow you to unhook the towing vehicle. Remove the tow vehicle from the vicinity of the camper
  6. With the help of the motorized tongue jack, level the trailer from front to rear. In terms of the tongue, there is a permanent level
  7. If the awning will be utilized (which is usually always the case), make sure it is fully extended and the poles and rafters are properly secured. With an 18-volt portable electric drill, you can raise the roof. Awnings should be adjusted. Reduce the height of the entry stairwell
  8. Pull-out bunks, as well as a dinette that slides out
  9. Travel door should be opened, and the screen door should be secured into the frame. Remove the outside chairs and tables, as well as the stove and Baby Q
  10. &nbsp
  11. Using an 18-volt portable electric drill, lower the stabilizers to the ground. Instead of lifting the frame, you only want to tighten them down.

If you do not complete this step in this order, you run the danger of modifying the camper frame. For those who are not utilizing a BAL Leveler, please keep in mind that the first few stops of the series are somewhat different.

  1. Returning to the camping location
  2. Circumambulate the trailer and release all of the roof locks
  3. Place your leveling solution (wood blocks, Lynx Levelers, ramps, etc.) in front of the low tire to prevent it from rolling over. Pulling the camper forward on the leveling solution will help it level out. It is considerably easier to drag the trailer onto the leveling device than it is to push the trailer onto the leveling device by traveling backwards. Also visible in your rear-view mirrors are the tire and leveling solution. Chock the wheel on the upper side

The absorption LPG unit is used by the majority of tent trailers that contain a refrigerator. If the trailer is not level, you run the danger of damaging your refrigerator. Other Preparation Tasks While I’m wandering around the camper to lower the stabilizers, I come across something.

  • Pop-Up Gizmos should be kept safe. a moment before Joyce places the Shepherd’s Poles
  • Light the water heater pilot
  • Turn on the water heater
  • Connect the gray water Aqua-Tainers
  • Connect the outdoor stove and Baby Q
  • And remove the water heater pilot. prepare the outside chairs and tables for use
  • Pour yourself a drink
See also:  How Do You Build A Tent

While I am out in the sun performing these chores, Joyce is in the camper and will take care of everything.

  • Prepare for the shower
  • The dinette table should be opened. Stack the Sterlite drawer assembly on top of the work surface
  • Pillows should be placed on the bed. Open all of the curtains and windows in your home. Allow Corky (our dog) to be let out of the SUV.

It usually takes less than 30 minutes to complete the entire process. I was able to do it in less than 10 minutes without having to use an awning. Everything we’ll need to set up the camper will be housed in this compartment, which will also have access from the outside.” This compartment, which has outside access, contains everything we need to set up the camper. data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”Everything we need to set up the camper is kept in this compartment, which has outside access.

  • srcset=” 800w, 300w, 450px” sizes=”(max-width: 800px) 100vw, 800px”>Everything we need to set up the camper is kept in this compartment with outside access.
  • It is simpler to keep things clean since the mat can be placed next to the wheel, and the BAL Leveler or Chock, as well as the stabilizer, can all be placed on the mat, making it more stable overall.” If you’re using a patio mat, I recommend that you lay it down first.
  • The mat may be placed next to the wheel and the BAL Leveler or Chock, as well as the stabilizer, can all be placed on top of the mat, making it easy to keep everything clean.
  • srcset=” 800w, 300w, 392w” sizes=”(max-width: 800px) 100vw, 800px”>If you are using a patio mat, I recommend that you lay it down first.
  • The BAL Single Wheel Leveler is shown.

BAL Single Wheel Chock (BAL Single Wheel Chock) ” data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”BAL Single Wheel Chock” width=”800″ height=”854″ src=” alt=”BAL Single Wheel Chock” width=”800″ height=”854″ 800w,281w” sizes=”(max-width: 800px) 100vw, 800px”> srcset=” 800w,281w” sizes=”(max-width: 800px) 100vw, 800px”> BAL Single Wheel Chock (BAL Single Wheel Chock) The use of a power tongue jack makes it easier and faster to level the vehicle from front to rear.

  • For those who experience battery troubles, there is an override mechanism on the jack.” ” data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”A power tongue jack makes it easier and faster to level the front and back of the vehicle.
  • the size of the image is 800 pixels wide and 773 pixels high.” 800w, 300w, 310w” sizes=”(max-width: 800px) 100vw, 800px”> srcset=”800w, 300w, 310w” The use of a power tongue jack makes it easier and faster to level the vehicle from front to rear.
  • This low-cost level makes it simple to level the surface.
  • Side to side, I prefer to lay a 6′′ level on the bumper for stability.” This inexpensive level makes it simple to level the ground.
  • I just use it for making changes from front to back.
  • the size of the image is 800 pixels wide and 684 pixels high.” 800w, 300w, and 350w sizes=”(max-width: 800px) 100vw, 800px”> srcset=”800w, 300w, and 350w” This low-cost level makes it simple to level the surface.
  • Side to side, I prefer to set a 6′′ level on the bumper for stability.
  • ” data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”Once the roof is raised, the step is lowered and the door is opened to allow access to the interior.
  • srcset=” 800w, 300w, 307w” sizes=”(max-width: 800px) 100vw, 800px”>Once the roof is raised, the step is lowered and the door is opened to allow access to the interior.

data-medium-file=” data-large-file=” loading=”lazy” src=” alt=” ” width=”800″ height=”600″ srcset=”800w,300w,400w” sizes=”(max-width: 800px) 100vw, 800px”> width=”800″ height=”600″ srcset=”800w,300w,400w” sizes=”(max-width: 800px) 100vw, 800px” Using a small 18-volt drill, you can raise the BAL Leveler, the roof, and drop the stabilizers with relative ease.

  • Unless your camper features “drop down” stabilizers, the majority of stabilizers may be lowered using a standard-sized socket and wrench.
  • data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”Most stabilizers can be lowered with a standard sized socket.
  • srcset=” 800w, 300w, 500w” sizes=”(max-width: 800px) 100vw, 800px”>Most stabilizers can be lowered using a standard sized socket, unless your camper has “drop down” stabilizers.
  • ” a width of 800 pixels and a height of 1165 pixels srcset=” 800w,206w,703w” sizes=”(max-width: 800px) 100vw, 800px”>This set of four 36′′ stabilizers that we purchased on eBay has proven to be a great investment.
  • data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”It is much easier to set-up the PopUp Gizmo cords before the bunk end shepherd poles are inserted.
  • To become more effective and avoid doing things out of order or forgetting a step, it is advisable to use the same methods every time you set up your tent trailer.
  • To turn on the water heater, I use a piece of PCV pipe to press the Pilot knob on the control panel, and then turn on the ignition.

After that, I remove the PCV pipe and turn the knob to the “On” position on the ignition switch.” The following procedures should be followed every time you set up your tent trailer: data-medium-file=” data-large-file=” loading=”lazy” src=” alt=”It is preferable to follow the same procedures every time you set up your tent trailer so that you become efficient and don’t do things out of sequence or forget a step.

  1. To turn on the water heater, I use a piece of PCV pipe to press the Pilot knob on the control panel, and then turn on the ignition.
  2. After that, I remove the PCV pipe and turn the knob to the “On” position on the controller.
  3. This will help you become more productive and avoid doing things out of sequence or forgetting a step.
  4. As I lower the stabilizers and make my way around the trailer, I find myself back at the water heater, which has its pilot light on once more.
  5. In the meantime, Joyce is finishing up the inside setup, and I am connecting our gray water collecting system.
  6. “While Joyce is finishing up the interior set-up, I connect our gray water collection system.
  7. Take note of the single wheel chock and stabilizer that is in place.
  8. srcset=” 800w,300w,344w” sizes=”(max-width: 800px) 100vw, 800px”>While Joyce is finishing up the interior setup, I connect our gray water collection system.
  9. The Baby Q and the outdoor stove have been put up, and I am almost finished.

It is now time to unwind and take pleasure in our camping holiday, whether we are outside or inside the camper trailer. Products that are recommended.

How To Level a Pop Up Camper on Uneven Ground the Right Way

*Some of the links in this post may be affiliate links. For further information, please see myaffiliate disclaimer, which can be found here. It is simple to learn how to level a pop-up camper in the appropriate manner! All you need is a little patience and the appropriate instruments to complete the task. Learning how to level a camper is something that every RVer, regardless of how large their RV is, should be familiar with and practice. The equipment you’ll need to level your pop-up trailer, as well as a step-by-step guide to getting the job done, are all covered in this article.

How to Level a Pop Up Camper Properly: The Basics

During the process of setting up camp, one of the very first things you’ll do is level your camper. However, it is not required to be totally flawless! A level camper will give a more pleasant camping experience, as well as assisting in the appropriate closing and opening of doors. Furthermore, if you have an RV refrigerator, your trailer must be level in order for it to operate securely. To level a pop-up camper, you will require a few different equipment. Among the most important tools are wheel chocks, which prevent your wheels from rolling, leveling pads or wood blocks, which assist level the uneven side, and a bubble level, which indicates when you’ve completed your project.

What You Need to Level a Pop Up Camper

There are several tools for leveling your camper that are included in the following list. You don’t have to have every single thing on this list, but you should make certain that you have at the absolute least the following: chocks, leveling pads or wood blocks, a bubble level, and stabilizers or jacks. For a more thorough list, see this article: 70+ Must Have Pop Up Camper Accessories if you’re looking for something a little different. In addition, towing, camping setup, interior accessories, storage accessories, and other related topics are covered!

Wheel Chocks

RV Wheel Chocks on Sale

  • Non-slip base
  • For tires up to 26 inches in diameter
  • Made of durable UV resistant material
  • Comes in a pack of two.

Links to affiliate sites and images from the Amazon Product Advertising API were used in this post. The most recent change was on 2022-02-09. RV tire chocks are an absolute must-have for any RV or camper owner. They are little blocks that are wedged below the RV tires on either side to prevent the trailer from moving or rolling. Despite the fact that chocks are particularly useful in steep terrain, they should be utilized every time you set up camp as an additional safety precaution. Wheel chocks can be placed only under one side of your wheel, but for the purpose of safety, I recommend placing them under both sides of your wheel.

Leveling Pads

a ten-pack of Camco RV levelers

  • A ten-pack of Camco RV Levelers

2022-02-09 / Affiliate links / Images from Amazon Product Advertising / Last update on 2022-02-09 These heavy-duty interlocking blocks are placed beneath the tires of pop-up campers to assist in balancing the camper from side-to-side when traveling. RV leveling pads are normally sold in a ten-pack and may be stacked together in a pyramid configuration to provide additional height for leveling an RV or trailer.

You just insert these beneath the tire on either the lower or uppermost side of the camper to assist in leveling it. Leveling pads, which may be placed under the tongue jack to level your pop-up camper from front to rear, are also beneficial.

Wood Blocks

Wood blocks can be used in place of leveling pads to raise one side of your camper’s height by a few inches. There is a downside, however: wood blocks do not survive as long as concrete blocks and are more subject to decay. However, in a pinch, they can serve as an acceptable alternative for leveling pads. Wood blocks beneath your tires or under your tongue jack may be used to level your camper from side to side and front to back, as well as from front to back. It’s important to remember, though, that you should update to more weather and rot-resistant equipment as soon as you can.

Bubble Levels

RV Level Gauge in a 2-Pack

  • Monitors RV leveling from 0 to 10 degrees
  • Comes in a pack of two
  • May be mounted securely with 3M tape
  • Measures front-to-back and side-to-side RV leveling.

Links to affiliate sites and images from the Amazon Product Advertising API were used in this post. The most recent change was on 2022-02-09. When it comes to leveling a pop-up camper, bubble levels are one of the most important tools you can use. Regular bubble level rulers may be used, or you can purchase a set of RV bubble levers that attach to the outside of your camper. If your camper isn’t level from front to back as well as from side to side, use a bubble level to check it.

Drive Up Leveler

Andersen Levelers in a 2-Pack

  • 2-Pack Andersen Levelers
  • Level a camper in 5 minutes
  • Can support campers weighing up to 30 thousand pounds
  • For tires with a diameter of up to 32 inches

Links to affiliate sites and images from the Amazon Product Advertising API were used in this post. The most recent change was on 2022-02-09. As an alternative to RV leveling pads, drive-up levelers such as ramps or Anderson levelers can be used. These levelers are effective, but they take up a lot of space in the storage area. Among drive-up levelers, Andersen levelers are the most popular and adaptable option since they offer many degrees of leveling (no pun intended) and may be used as a chock when necessary.

BAL Trailer Levelers

BAL Trailer Leveler is a trailer leveling device.

  • Designed for use with a single axle trailer
  • Fits 13, 14, and most 15-inch wheels
  • Includes a special ratchet wrench
  • Corrosion-resistant finish can withstand all weather conditions

Links to affiliate sites and images from the Amazon Product Advertising API were used in this post. The most recent change was on 2022-02-09. BAL trailer levelers are one-of-a-kind leveling devices designed specifically for single-axle trailers, such as pop-up campers. You just lay your BAL leveler under the tire on the low side of the camper and use a ratchet tool to raise the trailer until it is level with the rest of the camper. Using BAL tire levelers is a fantastic option if you don’t want to deal with the hassle of driving up to leveling pads.

See also:  How To Heat Tent Winter Camping

Stabilizing Jacks

The majority of pop-up campers are equipped with stabilizing jacks on all four corners of the trailer. The stabilizing jacks on your camper are critical in maintaining the level and stability of the vehicle. Stabilizing jacks are available in both automated and manual configurations. It is possible to use a power drill to raise and lower manual stabilizing jacks, which will help the process go more quickly.

How to Properly Level A Pop Up Camper

Allow us to demonstrate how to correctly level a pop-up camper now that you know what equipment you’ll need.

Positioning Your Camper

When you arrive at the campsite, unhook your pop-up camper from the truck and park it somewhere. Arrive at the campsite and park your camper in the general vicinity of where you intend to set up your tent or RV.

Once you’ve parked your camper in the location where you wish to set up, use your bubble levels to determine which sides of the camper need to be raised. Make careful to look both front-to-back and side-to-side when you’re checking.

How to Level a Pop Up Camper from Side to Side

Now that you’ve determined which side of your camper is lower than the other, it’s time to set up your leveling tools. Position the leveling pads or drive-up leveler under the tire on the lower side if you’re using them to help level the vehicle. You have the option of driving up to the leveler or reversing onto it. Regardless, go slowly and get out to double-check everything as many times as you need to. Use pads or drive-up levelers to level your pop-up trailer from side to side, and then place wheel chocks under the opposite tire to keep it from rolling away.

To begin, chock the tire on the higher side of the vehicle to assist in keeping your camper in place.

Raise the lower side of the camper with the ratchet wrench that came with it until your bubble level indicates that your camper is level from side to side.

Unhook Your Pop Up Camper

Then it’s time to detach your pop up trailer from the automobile. Make sure the trailer is level from side to side. Make certain that you have wheel chocks in place to prevent your camper from moving once you have disconnected it from your tow vehicle. After that, it’s time to level your camper from the front to the rear.

How to Level a Pop Up Camper from Front to Back

With the help of your tongue jack, you can level your pop-up camper from front to rear. To aid with front-to-back leveling while unhooking from the automobile, you may place leveling pads or a wood block beneath your tongue jack while it is unhooked from the car.

Set Stabilizer Jacks

Once your pop-up camper is level from front to back as well as side to side, it’s time to install your stabilizer jacks and level it out again. In order for your camper to remain level and prevent it from swaying and shifting while you are moving about inside, stabilizer jacks must be installed. As soon as you have lowered your stabilizer jacks, double-check your bubble levels to ensure that your camper is still on level ground. If your camper is on spongy ground, leveling pads can be placed beneath the stabilizer jacks to assist distribute the weight more effectively.

They are not intended to be used for leveling or to handle the majority of the camper’s weight.

Set Up Camp

Your knowledge of how to level a pop-up camper has been confirmed. It’s simple to figure out how to level a pop up trailer. You’ll be a seasoned RV veteran in no time. It’s time to start setting up camp now that your camper is level. Open your pop-up tent, set up your indoor and outdoor campsites, and get ready to unwind and enjoy yourself. You’ve worked hard for it! Articles that are related:

  • Introducing Rockwood Pop Up Camper, a pop up camper brand that offers something for everyone. Currently, there are 13 small pop-up campers for sale that don’t skimp on the amenities.

How to Level a Pop Up Camper [using BAL tire leveler]

We recently purchased a pop-up camper (sometimes known as a tent trailer), which fortunately came equipped with a BAL leveler. Here I’ll show you how to use the BAL Tire Leveler to quickly and easily level a pop-up camper on a flat surface. Although I am not an expert at this point, this gadget makes things simple. When it comes to leveling a pop-up camper, this helpful tool provides an easy solution to the problem we were having. Instructions on how to level a pop-up camper with a BAL tire leveler This post includes affiliate links for your convenience.

This will come at no additional cost to you.

Because I am an Amazon Associate, I receive money when people make eligible purchases. Please go to theDisclosurepage for further details. Always put safety first, and make sure you have tire chocks on your pop-up camper so that it doesn’t slide about while you’re leveling it out.

How to Level the Pop Up Camper Side to Side

It is necessary to level the pop up camper once it has been positioned in the location you choose and the wheels have been chocked. It must be leveled from side to side as well as front to rear. A bubble level is affixed to the back of our Palamino Colt pop up camper, directly below the center red light, for easy leveling. This is how we can determine whether or not our tent trailer is level from side to side. Our Palamino Colt Pop up Camper is equipped with a bubble level at the rear.

Leveling the Pop Up Camper with the BAL Tire Leveler

And we use an useful equipment called theBAL Single Axle Light Trailer Tire Leveler to ensure that the pop-up camper is level from side to side while on the road. (Some people refer to it as the Bal leveler on the internet.) When we look at the bubble level in the back, we can see what tire side needs to be raised. Then we place the BAL tire leveler under the tire that needs to be elevated. In this case, the device is located on the LOW side of the camper, as the tire is raised as a result of the mechanism.

  • When working in tight quarters (and especially when I’m not very good at backing up), I find that utilizing this tool is much easier than trying to back it up onto leveling blocks.
  • Here is a photo of the product packaging for the BAL tire leveler so that you can get a better sense of what it looks like.
  • It is necessary to move the BAL leveler around the tire that has to be raised so that the sides are flush with the tire (like it is cradling the tire).
  • (This is seen in the image below.) Threaded rod of the BAL tire leveler is mounted on the bottom metal plate of the leveler.
  • When you screw the rod down (in a clockwise direction), it raises the tire off the ground.
  • In order to know when you have reached your destination, it is helpful to have someone standing at the back of the trailer keeping an eye on the bubble level.
  • The BAL Tire Leveler is used to raise the driver’s side tire of our Palamino Colt pop-up camper, which we purchased from Camping World.

According to the directions printed directly on the BAL leveler, you must position it “.such that the edge of the tire raising plates is even with the outside sidewall of the tire.” It is possible to see in my photograph above that I should have positioned the tool somewhat closer to the tire’s outer wall.) And, although I’m not sure whether it’s necessary, once I’ve raised the tire to the correct height, I place a piece of wood under the tire just in case something happens.

Until now, the only problem I have with the BAL Tire Leveler has been that the ratchet that comes with it isn’t very good: it keeps clicking out of gear.

However, even if it did, it isn’t ideal. However, you may always use a 3/4-inch ratchet or wrench that you already have. Consider purchasing a BAL leveler if you want to make leveling your pop-up camper a little bit less difficult. It’s available for purchase on Amazon.

Covering the Threaded Rod on the BAL Tire leveler

The BAL leveler is adjusted by sliding a pool noodle over the threaded rod (Photo credit: LearnAlongWithMe.com) Here’s a quick and dirty hack for you. Using the BAL tire leveler on the same side of the vehicle as the door allows you to place a pool noodle over the threaded rod to provide further protection. Pop Up Camper Accessories that have been tested and proven ) (I included the BAL leveler in that piece as well.)

How to Level a Pop Up Camper Front to Back

The process of leveling the pop up camper from front to rear is considerably simpler than the process of leveling it from side to side. Our Palamino Colt pop up camper is equipped with a bubble level that is attached to the side, near to the passenger side entrance door. It may be seen in the photograph below, immediately above the electrical outlet box. Our Palamino Colt’s bubble level is located on the side of the vehicle (to check for level front to back) To level the pop up camper from front to rear, use the tongue jack (also known as a hitch jack) to raise or lower the front of the camper’s frame until the pop up camper is level.

Once again, having someone else notify you when you’ve achieved the desired level is quite convenient.

Stabilizing the Pop Up Camper

It is possible to stable the pop up camper (tent trailer) when it has been leveled from side to side and front to rear. While you’re inside the camper, stabilizing it will keep it from rocking and swaying. Two camper stabilizer jacks are located at the rear of our pop-up camper, which may be raised parallel to the bumper when driving and lowered when the unit needs to be stabilized. Because the pop-up campers are still relatively new to us, we haven’t purchased any further stabilizing items (at least not yet?).

  • If you’re looking for tips on how to stabilize a travel trailer or other recreational vehicle, this article may be of interest.
  • And if someone as inexperienced as us can accomplish it with the BAL tire leveler, then you can, as well.
  • Up Next:29 confirmed Accessories for a Pop-Up Camper 4 Things I Wish I’d Known Before Purchasing a Pop-Up Camping Trailer Are the outlets on your Pop Up Camper not working?
  • Camping enthusiasts will be familiar with the following 19 popular RV accessories: In addition, have a look at:
  • RV organization accessories that are 75 percent creative
  • RV security and safety–16 items and suggestions

Thank you very much.

Tim from LearnAlongWithMe.com has created a video to show you how to learn along with me.

How to Level a Camper

Documentation Download Documentation Download Documentation Leveling your camper makes it more pleasant to stay in while also ensuring that equipment such as gas refrigerators operate correctly. Using a level and some plastic leveling blocks or wood scraps, you may get the desired result. Using the tongue jack, adjust the camper’s level from side to side once it has been leveled from front to rear on the trailer. If you take the time to do this, you will ensure that your camper is secure and sturdy.

  1. 1 Select a parking spot that is level. Make an effort to select a parking location that’s as level as possible. Because leveling is intended to compensate for slight ground irregularities, parking on a slope will still be unpleasant and perhaps dangerous.
  • The camper should be repositioned such that the ground slopes towards the front or back end if the ground slopes towards the camper’s side.
  • 2Before leveling the camper, clean up the surrounding area. Make sure there aren’t any rocks, large branches, or camping gear in the area, as they might become a stumbling block during the process. After that, ask everyone to step away from the camper while you finish your project. Advertisement
  • s3 To determine the length of the camper from side to side, use a level. Bring along a low-cost level, such as a surface or bubble level, to keep things straight. Place the level in the camper’s doorway so that it runs from left to right. The side of the camper that is lower on the level is the side of the camper that will require raising.
  • Make sure to keep the camper attached until you’ve finished adjusting the level from side to side.
  • 4 Place leveling stones in close proximity to the tires. Leveling blocks are similar to robust, plastic Lego bricks for campers, but they’re made of plastic. They may be snapped together to create a ramp for the camper. They should be placed in front of the tire that has to be raised. These blocks are available for purchase at general merchandise stores such as Walmart as well as camping supply stores.
  • A less expensive leveling solution is two pieces of timber measuring two inches by ten inches (5.1 centimeters by 25.4 centimeters). The wood must always be broader than the tires in order to function properly. Furthermore, wood may take up a lot of storage space, and it should not be utilized if it is rotting or fractured.
  • 5 Back up the camper onto the blocks and secure it. Drive the camper forward onto the leveling blocks in a slow, deliberate motion. If you’re experiencing difficulty, ask someone to assist you. The wheels should be firmly planted on the blocks before continuing. Measure the levelness of the camper once more and make any necessary modifications.
  • If it is more convenient for you, you may position the leveling blocks behind the wheels and back onto them. If a portion of the tire is protruding from the leveling block or wood scrap, the tires will become weaker as time passes. Make necessary adjustments to the camper to avoid this.
  • 6 Place wheel chocks under the camper’s tires to keep it from rolling away. Chocks are a safety precaution, so keep them on even if you don’t believe you’ll need them later. To install the chocks, insert them beneath the wheel and wedge them in place with your hand. If the terrain slopes towards the back of the camper, it is best to position them behind the wheels.
  • Wheel chocks are available from a variety of retailers, including general merchandise stores and camping equipment stores. If you don’t have any, you may make do with wood scraps instead.
  1. 1 Place planks of wood under the tongue jack to provide support. The tongue jack is the portion of the camper that attaches to your car at the front of the vehicle. Stack a few 2 in x 10 in (5.1 cm x 25.4 cm) wood scraps under it to provide it with a comfortable resting area. In addition, the wood will guarantee that the camper remains level while in operation.
  • Another option is to purchase a wheel dock from a campground or sporting goods store. If you put the tongue jack in it, you won’t need to use any wood.
  • 2Disconnect the camper’s hitch. The jack should be unhitched from your vehicle’s bumper once you have found a safe resting area for it. Place the metal shaft of the jack on the wood. 3. Move your car out of the way so that you can complete the leveling and stabilization of the camper. From the front to the back of the camper, determine its levelness. Re-adjust the level of the camper’s door once again. This time, arrange it so that the ends point toward the front and rear of the camper. If one side of the camper is lower than the other, you’ll need to make further adjustments. 4 Lowering the camper requires adjusting the tongue jack. For information on how to adjust the jack, consult your owner’s handbook. Most of the time, the jack will be equipped with a crank that can be turned by hand to raise or lower it on its metal shaft. Carry on in this manner until the camper is level from front to rear.
  • Adjusting the camper’s level by adding or removing wood planks might also be beneficial.
  • 5 Place wood scraps beneath the stabilizing jacks to provide additional support. Stabilizing jacks are located on each of the camper’s four corners. These jacks aren’t intended for leveling, but they will keep your camper from shaking and falling out of level if you use them. To guarantee that the stabilizers do not move, place two or more 2 in 4 in (5.1 cm 10.2 cm) wood blocks under each one.
  • If your camper does not come equipped with stabilizers, you can have them permanently installed by a professional. Place jack stands from automotive stores beneath the camper’s four corners as an alternate solution.
  1. It is possible to have stabilizers permanently installed in your camper if it does not already have them on place. Place jack stands from automotive stores beneath the camper’s four corners as an alternative solution.
See also:  How To Camp Comfortably In A Tent

Create a new question

  • Question What is the purpose of the stabilizing jacks? Budhi SuhradiAnswer from the Community They are used for leveling and adjusting the body of automobiles and trucks. A stabilizing jacks system is comprised of two systems, one of which is hydraulic and the other which is manual.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Look around lumberyards for scrap wood that may be used as leveling blocks. Frequently, you will be able to take the scrap home for free.

Advertisement

  • Only use leveling blocks that are broader than the tires in order to minimize tire damage. Avoid parking the camper on uneven ground to prevent it from tilting
  • The use of stabilizer jacks to support the weight of the camper will result in irreparable damage to them.

Advertisement

Things You’ll Need

  • A level
  • Leveling blocks or scrap wood measuring 2 in. x 10 in. (5 cm x 25 cm)
  • Wheel chocks or bits of wood are also useful.

About This Article

Summary of the ArticleXLeveling your camper makes it more pleasant to stay in while also ensuring that your appliances operate correctly. In order to correctly level your camper, you’ll need a bubble level, certain pieces of wood, and leveling blocks. Make use of your bubble level to determine the side-to-side angle of your camper. Set up the leveling blocks next to the tires and drive the camper into them if the ground isn’t perfectly level. The wheels should then be secured with wheel chocks.

If it is not straight, insert the pieces of wood beneath the tongue jack and stabilizing jacks to straighten it out.

Continue reading for more information, including how to prevent harming your tires while using leveling blocks.

The writers of this page have combined their efforts to create a page that has been read 57,192 times.

Did this article help you?

You are currently using an out-of-date web browser. It is possible that this or other websites will not show correctly. You need either upgrade your browser or switch to another one. Hello! I recently took my pop-up out on its first trip with DW and had a great time. Although I had some difficulty leveling it out, and I’m not sure what the ideal method is for doing so. Being new to the pop up, I’m still a little perplexed as to how to get it level without primarily relying on the stabs. Any suggestions?

In order to determine which side of the trailer should be driven up onto wooden planks when I get at the campsite, I use my eyes to guide me.

It is my understanding that lowering the camper while placing the weight on its stabs is risky and will cause injury to the PUP.

Thanks!

To level, use a real level (you can learn more about the different types and where to put them in other conversations).

Personally, we’ve had fantastic success using Lynx levelers for two pop-ups and a TT installation.

Then, depending on your pup’s needs, either raise the ceiling first, then drop the stabs, or drop the stabs first, then raise the roof.

Yes, placing too much weight on the stabs can result in harm to the stabs themselves or to the pup’s farm if the pup’s farm is twisted.

First, level the vehicle with the tongue jack, then lower the stabilizers and tighten them.

Thank you for your response; I’m currently utilizing the wooden planks to level the sides of the house.

In any case, if I raise the tongue wheel, it appears that I am putting more weight on the back stabilizers, and vice versa, once I lower the tongue jack, it appears that I am putting more weight on the front stabilizers.

The stabs should not be activated until after you have reached the appropriate level.

Is it the type where the inner tumble slips out or the type where you crank it down?

Because the slider jacks were damaged by the previous owner of our first dog, we simply utilized stack jacks, which were easy to adjust to a snug but not too tight fit for raising the pup’s weight again.

In most circumstances, eyeballing it can be helpful, but it can also be deceptive in other situations.

All of that being said, we have performed comparisons with the interior floor in both directions (including the ‘fridge when traveling through tight spaces) at some time with each camper to determine how accurate the t-level is and where it should be placed.

I uploaded some photos to another thread: I had seen that post before and thought it to be quite useful, so I went out and got a T level.

In addition, I have a torpedo level that I might use to level the ground inside my camper.

That’s something I would never have thought of.

Unless the interior floor is deformed or damaged in some way, it is a reliable method of assessing level.

With each camper, we’ve learnt to predict the number of Lynx blocks we’ll need to level the level based on the appearance of the bubble on the level.

Andrea Vaughan’s photo from April 2016 was uploaded on Flickr.

@Firehawk068 – Thank you for your comment.

I made a significant dent in one.

Unfortunately, there are no white walls, and getting appropriate tires for it is difficult enough!

Then I use the tongue jack wheel to move the vehicle from front to rear.

Can you tell me how I might avoid placing all of this weight on the stabilizers?

Don’t turn the wheel all the way back up.

7th of August, 2014, CAMPER LEVELING Before disengaging the camper from the tow vehicle, it is necessary to level the camper.

Place your level on top of or on the floor of the camper’s interior, or use the bubble levels that came with the camper.

Make a mark in the dirt, gravel, or sand where the tire’s back edge used to be.

Back the camper onto the boards/blocks and recheck level.

In the case of the a BAL leveler you would not need to move the camper only insert the device around the lowest tire and raise it up according to manufacturers instructions until the camper is level.

Now you can disconnect the camper from the tow vehicle and level the camper end to end/front to back using the tongue mounted jack.

I believe you should wait until you have raised the roof before lowering the stabilizers to avoid putting any undue pressure on the frame.

Before you begin to back in, look for the most level spot on the property that also provides the shade you desire and is far enough away from the fire pit so that it will not cause any problems.

Determine which side is the lowest and make an educated guess as to whether 1/2 is correct “or a millimeter, or whatever.

Drive up ahead of the camper, and place the boards/blocks where the tire used to be.

Instead of pulling forward and then backing onto the boards, some campers find it easier to pull forward onto the boards and in that case you would mark where the front of the tire is and then back the camper up leaving an area to place the boards/blocks.

After leveling from side to side, chock all tires front and back.

Now that you are level from side to side and front to back you can lower the stabilizers if you desire. I believe you should wait until you have raised the roof before lowering the stabilizers to avoid putting any undue pressure on the frame. Excellent!

Leave a Comment

Your email address will not be published. Required fields are marked *