How To Install A Stove Jack In A Canvas Tent

How to Install a Tent Stove Jack

When camping in cold weather, wood burning tent stoves are a safe and effective method to warm up acanvas tent quickly and efficiently. In tenting, stove jacks, also known as flashings, are heat-safe exit locations that allow the flue pipe of a tent stove to be extended through the tent’s roof or sidewalls. It is possible for smoke from the camp stove to leave in safety through the flue pipe, while the stove jack maintains heat inside your tent while keeping rain and snow outside. Installing a stove jack in your tent will be necessary before you can snuggle up and get comfy close to your tent stove.

The Sibley Bell Tent is included in CanvasCamp’s instruction on how to install a tent stove jack; however, the same method may be used to any style of high-quality canvas tent as well.

Video Guides to Installing a Tent Stove Jack

Learn more about tent stoves in our Tent Stove Buyers Guide: The Complete Guide to Buying, Owning, and Operating a Portable Wood Burning Tent Stove, which is available for free download.

How To Install A Stove Jack Flashing Kit On A Canvas Tent

That is an excellent question. In the event that you’re already the proud and content owner of a canvas tent, you’re about to become even more proud and content once you’ve outfitted your canvas tent with a wood burning stove to keep warm and a flashing kit to protect your tent by keeping out rainwater and providing additional stability against the wind. If you possess a canvas tent from Life inTents, you’ll see that your tent comes with a stove jack and a 3″ pipe exit hole already attached (which can be enlarged up to 6″).

It’s a rather straightforward task, especially if you have a friend who can assist you with it.


Learn how to install a wood stove flashing kit into a canvas tent so that it may be used with a wood burning stove by following this article. The tent stove and flashing kit included in this set-up should be compatible with the vast majority of canvas tents. **SAFETY RECOMMENDATIONS: Always adhere to the recommended tent positioning supplied by your chosen wood stove manufacturer. You should also lay a fireproof pad under the stove, wipe the flue pipe frequently with a brush, set a carbon monoxide detector on the floor, and consider a wood stove thermometer.



  • A pencil or a pen is required. a knife blade that is razor sharp
  • Two wrenches, sockets, or plier/s
  • Two pair of scissors
  • Two pair of plier/s
  • Two pair of plier/s The part of stove pipe that leads out
  • The assistance of a friend (which is not essential, but can be beneficial depending on the friend)


  • A stove jack flashing kit, such as the one seen below
  • A bell tent made of canvas, such as these
  • A wood-burning stove, such as the one seen above

DETAILSSPECIFICATIONS:This specific stove jack flashing kitis constructed of silicone and stainless steel and covers stove pipe temperatures up to 455°F.

  • With the six nutbolt sets that come with the kit, the dual stainless steel rings secure the flashing. Adjustable to suit stove pipes ranging from 2.5″ to 6.25″ in diameter
  • The outside diameter of the metal ring is 9.5″ and the inner diameter of the metal ring is 7.25″
  • The total weight of the metal ring is 1.5 lbs.

Here’s what your stove jack flashing kit will look like when you’ve completed the installation process successfully.

Isn’t this something special? THE INSTALATION OF THE SILICONE FLASHING Ready? Let’s get in shape! You’ll want to trim the silicone flashing to fit the flue pipe just correctly, so here’s how:

  1. A portion of the flue pipe should be inserted into the silicone flashing outlet
  2. Fold the silicone into the flue to assess the amount of material that will need to be removed
  3. Cutting silicone to the correct diameter can be accomplished with a box knife or scissors

STOVE JACK FLASHING KIT INSTALLATION GUIDELINES Having cut the silicone flashing to size, locate that hopefully helpful friend of yours and let’s get this thing fitted! The first step is to take out all of the nuts, bolts, and washers from the flashing and lay them aside in a secure location. INSTALLATION STEP 2: From within the tent, push the exit pipe into place at the selected installation site. Make a pencil mark around the circle of the stove pipe on the canvas inside where you want the pipe exit to be situated.

  • Mark the locations of each bolt on the metal ring with a pencil or pen.
  • STEP 5 – Locate the nuts and bolts that you had previously stored carefully.
  • Insert a washer and a bolt through the metal ring and the gasket to complete the installation.
  • The long side of the bolt will now be inside the tent, while the short side will be outside.
  • STEP 7 – From the inside of the tent, attach the washer and nut sets to each of the six protruding bolts using the hex wrench.
  • This is where that buddy can really shine and make a difference.

Even if you are working alone, you may be able to reach up and outside to hold on to the bolt with one hand while tightening with the other if you are able to reach up and outside to grasp on to the bolt with one hand while tightening with the other (particularly if you have walls that roll up for easier access).

So, what do you do now?

After that, connect the pipe portion to your wood stove using the appropriate fittings.

In order to ensure that your pipe part outside the tent is at least 15″ above the fire retardant canvas, you need install it at least 15″ above the ground.

Now go ahead and relax with your feet up and take it easy. A heartfelt thank you to your helpful acquaintance. Many seasons of warm and pleasant tent experiences ahead. Excellent effort, guys! THE BOOK SELECTION 12th of January, 20228 minutes read

Start A Mobile Glamping Business in 2022

Glamping event providers and backyard glamping enterprises began to spring up in the Wes boroughs in the year 2015. Mobile glamping enterprises are in high demand right now, surpassing their supply, making this a fantastic small business opportunity in your local community. We want to assist you in determining whether or not it is the right moment for you to start your own glamping rental business. THE LIT LIST will be published on January 9, 2022. 6 minutes to read

How to Maintain and Clean a Bell Tent

Canvas tents are extremely durable and may last a lifetime if they are properly maintained. Canvas tents, like keeping a healthy body, may last a lifetime if they are properly cared for and maintained. Here are some ideas to help you clean and care for your bell tent so that you may get the most usage out of it for a long period of time.

Can You Put a Stove Jack in Any Tent? – 2021 Complete Guide

Having a camptenting experience throughout the winter and freezing weather is an unforgettable experience. However, it is tough to deal with the frigid temperatures. In order to survive in cold weather, it is necessary to keep both the tent and oneself warm. Even if you dress in many layers of clothing and utilize a specialized sleeping bag, it will not be enough to keep you warm in the cold weather. The stove jacks may be used to keep a tent warm, but a canvas or polycotton tent with a chimney is all that is required for installation.

In the event that you’re concerned about the amount of smoke it releases, there’s no need to be concerned.

You must first learn how to securely place a stove jack within the tent in order to enjoy this great cozy experience.

Using a woodburning stove in any tent? is the source of this information. Stove jacks are extremely safe to use in a polycotton or canvas tent, which creates a warm and welcoming environment for the campers. Depending on how well they are installed, they might be hazardous to your health. It is necessary to understand how to install them in order to ensure a safe and viable installation. Before you place it in a tent, you must also adhere to the safety precautions in order to achieve excellent outcomes.

Fire Precautions

When installing a stove jack, you must take the following safety precautions to avoid a fire.

  • First and foremost, it is preferable to roll up the groundsheet and place the stove jack directly on the ground. The stove jack may be able to escape fire ashes, which might cause the mat to burn. You’ll need a spark arrester to keep sparks from falling on the tent and to keep it from catching on fire if something goes wrong with it. Now, remove the most vital items from the vicinity of the stove since they will become hot
  • It is necessary to maintain a fire extinguisher on hand in case of emergency.


After you have taken the necessary measures, you will need to assemble the equipment and supplies that will be needed to install a stove jack in a tent. As a starting point, you’ll need a worthycanvas tent, two adjustable wrings, a sharp knife, an electric stovejack, a pencil, and a chimney flue. Second, all you require is someone to provide a hand.

If you plan to use the new branded tents, you will need to burn them for many hours before you can use them again. The burning process will allow the stove jack to eliminate all of the chemicals and oils that were left over from the manufacturing process.

Choosing Stove Placement is the source of this information. Selecting a suitable location for the stove jack should be done after everything has been assembled and is in place. You must first determine the temperature and the difference in environmental conditions before making the order. If you install the heater in the appropriate location, the tent will be heated equally by it. Place the larger area in the middle of the tent if you want the entire area to be heated. Particularly in cold weather, the stove jack’s center location is the most convenient position to have.

Cutting and Disassembling is the source for this image. Selecting an acceptable location for the stove jack must be done after everything has been assembled. Checking the temperature and the environmental difference should be done before making the order. A tent will be evenly heated if it is placed in the correct location. If you want that greater area to be completely heated, you should position it in the center of the tent. Particularly in cold weather, the stove jack’s center location is the most optimal location.

Cutting of Bolt Holes

Make a mark on the cooktop where the flue pipe will be installed. Place the metal ring around the stove, followed by the flue pipe exit locations, then use the pencil to mark the precise areas where the stove will be cut. Make small holes with the knife to allow the bolts to slide through them more easily. However, do not cut the holes at this time; you will have to do it later.

Installing the Stove Jack

It is necessary to secure the stove jack metallic area with the bolts from the outside of the tent by pressing it against the fabric. With the nuts, attach a second metallic ring from the interior of the tent to the first. Using the wrenches, tighten the canvas between the metallic rings until it is completely enclosed. As much as you can, tighten the seal between the nuts together. You may also add glue or wax to make the project last longer and be safer. After it has been placed, you will need to cut a hole in it for the flue pipe to be inserted.

Fire up the Stove Jack

Cut the hole for the flue pipe that you have previously outlined with a pencil so that it can be installed. The flue pipe should be inserted in between the metallic rings before assembling and burning the stove. During the frigid nights, light a fire and relax in the warmth and comfort of your home.

Cheap Tents with Stove Jack

During the winter, heating a tent may be extremely difficult and time-consuming. People usually build a wooden fire outside their tents just to be on the safe side. A stove jack is required for a hot and comfortable tenting experience in order to solve the problem of heating your tent.

However, there is the issue of selecting a tent, for which there is a wide selection of tents accessible. People are mostly looking for the most dependable and reasonable tents with a stove jack that are the most convenient to use and are affordable.

FAQs is the source of this information.

Can you add a stove Jack to a tent?

Yes, it is possible to install a stove jack to a tent since it offers a pleasant and hot experience in cold and windy environments. They are completely safe to use because they are made up of smoke that escapes from the flue pipe.

What tents can I put a stove in?

It is not permitted to use the stove jack in any tent for fear of it catching fire. Tents made of canvas or polycotton are the most suitable for use.

Is it safe to use a stove in a tent?

Using a stove inside a tent is a risky proposition. A good ventilation system is required for the safe operation of a stove. The stove tent must be placed once the necessary safety procedures have been followed, as described above.


By incorporating the stove jack into the canvas and polycotton tent, you can now relax and enjoy yourself even more. Heat is a fundamental necessity, as it is necessary for cooking meals as well as keeping a tent warm. Place the stove jack inside the tent and connect the flue pipe to allow smoke to escape for a more comfortable experience. Follow the fire safety precautions instructions to the letter and enjoy a warm and peaceful experience throughout the winter season. Forget about the weather and take use of the stove jack’s heating capabilities when inside a tent!

See also:  How To Decorate A Wedding Tent On A Budget

how to install a stove jack in a canvas tent? –

When using this tent, there is a risk of fire. It is not recommended to expose the tent fabric to flames or high temperatures. In your tent, you should never experiment with different types of heat sources, such as stoves, lamps, heaters, and so on.

Can you add a stove jack to any tent?

With this tent, there is a danger of fire. There should be no exposure to fires or high temperatures when using the tent’s fabric. Heat sources such as stoves, lamps, heaters, and other similar devices should never be used in your tent.

How high should stove pipe be above tent?

The stove pipe must extend at least 6 inches over the ridge of the tent in order to function properly. As a result, there is reduced likelihood of spark holes burning in tent roofs since the sparks will be blown away from the source. Make certain to use the spark arrester that is included in the kit.

Can you heat a canvas tent?

The Winnerwell woodburning stove is our favourite option for keeping the temperature in your tent at a suitable level. Prices might vary greatly depending on the size of your stove, but a decent stove will last a lifetime if properly maintained. Perform a hot dry run on your woodburner before turning on the ignition (so that paint fumes can be burned away).

How well do canvas tents hold heat?

Tents are commonly used to keep the wind at bay and to retain heat. As a result, the interior of a tent can be at least 5 degrees warmer than the exterior.

Are canvas tents warm in winter?

The canvas tent is actually more expensive than the nylon tent, but because of the canvas, it remains warmer inside during the winter months. Fabrics such as nylon and canvas are more effective in transferring heat. As a result, the heat generated by the campfire may circulate for a longer period of time without being cooled by the frigid temperatures outside.

Is it safe to heat a tent?

It is possible to make tent heating safer by using an electric heater with the appropriate safety features or a catalytic heater that meets the Canadian Standards Association’s (CSA) 4 safety standards, even though there is no completely risk-free method of heating. This certification has been in effect since 1998.

Is it safe to use a stove in a tent?

If there is any form of flame present within a tent, there is a significant fire hazard. Because tents have inadequate ventilation, carbon monoxide and other gases can build up fast, resulting in an explosion and carbon monoxide poisoning in the event of an emergency. Never use your stove in close proximity to your tent, and always read and follow the manufacturer’s instructions on how to use it properly.

Are Kodiak canvas tents good?

Featuring a distinctive design, the Kodiak Canvas Flex-Bow tent is a well-built, elegant tent that is evocative of its older-generation forefathers in construction. You’ll realize that the entire focus of this review revolves on the fact that this beauty is hefty and tough to maneuver when the weather isn’t cooperating nicely.

how to install a stove jack in a canvas tent?

INSTALLATION OF A STOVE JACK Pull the bolts from the ends of the canvas through the holes in the canvas. As you screw the nuts onto the bolts, use the inside of the tent as a guide to ensure that the second metal ring is properly positioned. An very tight fit between the rings and the canvas should be achieved. As you tighten the bolt and nut, use your wrenches to keep them from moving about.

How high should stove pipe be above tent?

The stove pipe must extend at least 6 inches over the ridge of the tent in order to function properly. As a result, there is reduced likelihood of spark holes burning in tent roofs since the sparks will be blown away from the source.

Can you put a stove in a Kodiak canvas tent?

The structure of this design is made of 1-inch galvanized steel tube, which is sturdy enough to withstand heavy winds and wind-driven snowfall. allows you to utilize your wood-burning stove, which will keep you warm and toasty throughout the colder months. The 8×8 foot space is defined as 8 feet by 8 feet. The tent stakes measure 12 inches in height and are packaged in a storage bag with a zipper for easy storage.

Can you add a stove Jack to a tent?

The structure of this design is made of 1-inch galvanized steel tubing, which allows it to endure severe winds and snowfall caused by the wind. allows you to utilize your wood-burning stove, which will keep you warm and toasty throughout the colder winter months Eight feet by eight feet constitutes the 8×8 foot space. A storage bag with a zipper is included with the tent stakes, which are 12-inches in height.

Can you put a wood stove in a canvas tent?

Camping in cold weather necessitates the use of a wood-burning tent stove. A safe and effective method of heating the tent is employed. By installing a stove jack, you can keep rain and snow out while venting smoke from your camp stove in a safe and secure manner.

Are canvas tents good in hot weather?

Canvas tents, in the same manner that they keep you cooler in the summer, they keep you warmer when the weather turns chilly. Canvas tents are cozier than synthetic tents because the warmth is contained inside the tent, preventing air from leaving and allowing it to be more comfortable.

Can you use a propane heater in a canvas tent?

Because carbon monoxide does not have a distinct odor, propane heaters are not suggested for use in enclosed areas.

The heating elements used in this category are intended for use inside. In fact, the first time I used a gas heater in a tent was when I was a little youngster. As a result of canvas’s ability to breathe properly, condensation is rarely an issue.

The Stove Mate – Fireproof Canvas Tent Stove Flap Installation Kit

],”images”:,”featured image”:”// Tent Boutique Aug 20160059 copy b2c157e4-b4cb-4275-b406-041caeac8c89.jpg?v=1550263912″,”options”:,”media”:,”requires selling plan”:false, “selling plan groups”:,”content”:”u003cliu003e Make your own canvas stove flap for your bell tent to use with it. u003c/liu003enu003cliu003e Our 360gsm Fireproof canvas was used to create this piece. u003c/liu003enu003cliu003e It is recommended that you drill a 60mm hole in order to include the Outbacker or Frontier flashing kit.

u003c/liu003enu003cliu003e Kit measuring 45cm x 45cm u003c/liu003enu003c!

MultiSource SEO (Beta) -u003enu003cdivu003enu003cdivu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003enu003 class=”trustpilot-widget” data-locale=”en-US” data-template-id=”5763bccae0a06d08e809ecbb” data-businessunit-id=”59f86e8d0000ff0005af2699″ data-style-height=”300px” data-style-width=”100 percent” data-style-height=”300px” data-style-width= The Stove Mate – Fireproof Canvas Tent Stove Flap”u003eu003ca href=” target=” blank” rel=”noopener noreferrer” u003eTrustpilotu003c/au003eu003c/divu003enu003c!nu003enu003enu003enu003enu003enu00 – Disable the TrustBox widget -u003e”

  1. Home
  2. The Stove Mate – Fireproof Canvas Tent Stove Flap Installation Kit (Fireproof Canvas Tent Stove Flap)
Product Description
  • £29.99 The maximum number of units available has been achieved
  • Your bell tent may be customized with a fabric stove flap. Made from our 360gsm Fireproof canvas, this piece is a must-have. To accommodate the Outbacker or Frontier flashing kit, the hole is set to 60mm in diameter. The size of the hole may be changed to suit bigger flue flashing kits. Kit measuring 45cm x 45cm

The tent flashing kit allows you to alter your tent so that it can be used with the Outbacker Stove and smoke can be securely vented to the outside. In order to be used with Outbacker style stoves in fire resistant canvas shelters such as Bell tents, Tipi’s, and Yurts, this flashing kit has been built specifically for them. A 60mm hole is included as normal, but it also features a cut line that is the proper size to fit 4″ Traveller stove flues if desired. Temperatures up to 300 degrees Celsius are appropriate for the silicone collar.

  • Use of this product is only recommended when used in conjunction with a fire retardant canvas tent, tipi, or yurt.
  • We recommend that you do not leave stoves alone and that you make sure they are completely extinguished before going to bed.
  • We will not be liable for any loss or damage incurred as a result of the usage of the flashing kit, regardless of how it was caused.
  • The Warranty covers all components of our stoves for a period of one year from the date of purchase, and ensures that they are free of defects in materials and workmanship (excluding paint finish).
  • This time allows the manufacturer to fix any faults by repairing or replacing defective parts of the equipment, or by making those parts available to purchasers, whichever occurs first.
  • Furthermore, the manufacturer will not be liable for any losses that occur as a result of the purchaser’s negligent operation.
  • There are no other guarantees, either explicit or implied.

The cost of returning the item to us will be your responsibility.

If you have returned a faulty item and have requested a refund rather than a replacement, we will inspect the problematic item upon receipt of the returned item.

The amount of the reimbursement for return shipping is limited to £8.99.

If a defect is discovered, you will be reimbursed up to the amount of £8.99 for your purchase.

The warranty on Outbacker stoves is non-transferable and cannot be extended.

To keep the appearance of your stove in good condition, we recommend that you clean it on a regular basis and that you touch up any painted surfaces with high-temperature barbeque paint. In addition to this limited guarantee, no implied warranties apply to the finish of the paint job.


Outbacker Stoves provides FREE SHIPPING to the majority of the United Kingdom. The specifics of the exclusions are shown below.


All items bought before 2 p.m. will be sent the same day they are ordered. Our usual deliveries are delivered between the hours of 8:00 a.m. and 19:00 p.m. Monday through Friday (except during public holidays). As soon as your order has been delivered, you will get an email including the tracking information for your shipment. We will frequently deliver the next day to most UK addresses; however, our service is not a guaranteed next day delivery service, and we are not liable for any delays encountered by our delivery agents.

On rare occasions, this might be extended to a maximum of 72 hours.

If we anticipate that a delivery will be delayed for more than 7 days, we will inform you through email or telephone, and you will have the choice to cancel your purchase at that time.

(The following Wednesday following the Bank Holidays) Some of the goods on our website are supplied directly from our suppliers and will not be combined with other orders.


The majority of the United Kingdom is free of charge for delivery. Delivery to Southern Ireland (the Republic of Ireland), Northern Ireland, the Highlands of Scotland, and the islands of Jersey, the Isle of Man, the Isle of Wight, and Guernsey will incur an additional fee. The fee for each of these places is listed in the table to the right. Deliveries to these areas may incur additional costs, which are based on the size and weight of the item(s) purchased. Destination of the shipment It might take up to 5 working days in Southern and Northern Ireland.

The islands of the United Kingdom (which are not included below) – up to 5 business days Jersey – Approximately 5 working days.

It may take up to three working days for the Isle of Man To and from the Isle of Wight: up to three working days Shipping costs for orders to destinations other than the United Kingdom’s mainland will be calculated at the end of your order.


All of our deliveries are subject to a signature requirement for your protection. The courier will attempt to bring the items to your house, and if no one is home, the courier will attempt to deliver the things to a neighbor and leave you a card informing you of the location of your delivery. If they are unable to deliver, they will give you a card, which you may use to contact them and schedule another delivery time. Alternatively, you may phone us on 0115 8966796 if you have any concerns with a delivery.

Service that is expedited (excluding those destinations detailed in the chart above) Special Service TypeSaturdayBefore 12:00 p.m.

Special Service Type If the goods are lost or damaged during transit, please notify us as soon as possible (within 24 hours) so that we can replace the goods as soon as possible. Please allow 3-5 business days for deliveries in Europe.

Worldwide Shipping:

We ship internationally using DHL and DPDFedex. However, if your area isn’t mentioned on our website, please contact or email us with your address and the items you’d like to send. Customs clearance, duties, and taxes are your responsibility in the country where you are purchasing the item. For shipping outside of the EU, our website displays a pricing that includes the UK’s 20 percent VAT already deducted from the total.

What Glue For Tent Stove Jack

The stove jack is capable of withstanding temperatures of up to 700°F (400°C). Intended to be cemented straight into the wall or ceiling of any canvas or treated canvas tent that is designed to support a stove, this stove jack is a great addition to your camping gear. This may be accomplished with Tear-Mender adhesive, which is readily accessible at most hardware stores and upholstery shops.

Can you put a stove Jack in any tent?

Heat resistance of 700°F (400°C) is provided by the stove jack. Intended to be cemented straight into the wall or ceiling of any canvas or treated canvas tent that is designed to support a stove, this stove jack is a great addition to your camping arsenal. This may be accomplished with Tear-Mender adhesive, which can be found in most hardware stores and upholstery shops.

What is a stove Jack for a tent?

Installation Instructions for a Tent Stove: A Comprehensive Guide When camping in cold weather, wood-burning tent stoves are a safe and effective method to heat a canvas tent quickly and efficiently. In tenting, stove jacks, also known as flashings, are heat-safe exit locations that allow the flue pipe of a tent stove to be extended through the tent’s roof or sidewalls.

How do you fireproof a canvas tent?

How to Make Canvas Tents Fireproof Warm, soapy water should be used to clean your canvas tent. You may get a fire retardant spray from a store such as National Fireproofing or DTW Flames at a reasonable price. Check the label on the bottle to make sure the product is appropriate for use with a canvas tent before using it. Place the tent on the ground, flat on the ground, in an open area.

See also:  How Big Grow Tent For 4 Plants

Can you get carbon monoxide poisoning from a camping stove?

It is possible to become ill from carbon monoxide poisoning if you use any device that runs on gas, wood, petrol, oil, kerosene, or diesel. Camping stoves and fuel-burning lanterns, as well as refrigerators, heaters, generators, and any other fuel-burning equipment, fall into this category.

Where does the stove go in a bell tent?

Putting your stove in the centre of your tent ensures uniform heat distribution throughout the tent, and there will be more flue within the tent, making it simpler and faster to heat the tent up in the morning. In the event that you enjoy cooking, this may be a convenient area to set up a chair near to the stove when you’re preparing a meal.

How do you make logs burn slower?

Build fires using the top-down strategy to ensure that a fire is sluggish to spread from the beginning. Rather of burning extremely dry wood, use wood with a moisture level between 15 percent and 20 percent, which is the optimum range for firewood. When building a fire, try to utilize hardwood logs rather than softwood logs to ensure that the fire burns for the longest amount of time.

How do you heat a tent?

Methods for heating a tent in the absence of power Hot water bottles may be used to heat your tent. The tent is kept warm with the help of heating rocks.

Make sure your tent is well-insulated. Set up your tent on top of a campfire to keep the bugs away (after the fire dies) Use an electric blanket to keep you warm throughout the winter. Carpets for underfloor heating that may be used with your tent. Portable electric heaters are available.

Can you use a wood stove in a nylon tent?

Keep in mind that if a nylon tent catches fire, it may act similarly to napalm. Of course, all tents have the potential to catch fire and burn, but nylon is very flammable and can melt. For dry heat, there is nothing better than a wood burning stove.

What is stove Jack?

When used with a tent stove, the Exit I Mini Stove jack is a heat-resistant modular flashing that can be installed on the roof or side wall of any canvas tent to allow the flue pipe to be vented. The stove jack is constructed of stainless steel and galvanized rubber to firmly hold hot flue pipe sections at a safe distance from the canvas. It is available in two sizes.

How do you keep a tent stove burning all night?

Tips for Keeping a Wood Stove Burning Throughout the Night Move the charcoal to the front of the wood stove by raking it in a circular motion. To create a compact arrangement behind the coals, arrange five to seven huge logs in a tight shape. Close the door and take it easy.

How hot can a tent stove Get?

That appears to be about correct, in my opinion. 60-70 degrees Fahrenheit in subfreezing temperatures. If the temperature is above freezing, you may simply warm yourself up by sleeping on top of your bag.

How do you light a fire in a tent?

Begin by placing the smallest pieces of kindling you have on either side of the piece of wood that has been planted in the ground, creating a tent shape with one side left open, as seen in the photo above. Build a few levels of the lean-to by stacking increasingly large pieces of kindling on top of one another. To get your fire started, light the tinder inside the teepee with a match.

Can you cook inside a bell tent?

Because most bell tents are equipped with a stove hole, it is necessary to carry your own cooking stove so that you may prepare your own meals while camping. If you intend to prepare your own meals, don’t forget to bring the necessary pans, glasses, silverware, and plates.

Are Bell tents warm?

They are warm, comfy, and waterproof. They are also simple to put on and take off thanks to a zip.

Do camping stoves give off carbon monoxide?

When used in a tiny tent, kerosene camping stoves do emit carbon monoxide (CO). It is high enough that after 120 minutes in the tent, the COHb levels in the venous blood are big enough to induce complications.

What are stove Jacks made of?

The fabric of the stove jack is often composed of a fiberglass silicone fabric, which is extremely heat resistant and can withstand extremely high temperatures.

Can you have a fire in your tent?

The use of wood burning stoves is not permitted in all types of tents. The tent will normally be made of canvas or poly cotton since they are durable, highly ventilated, and do not burn quickly when exposed to the elements.

Why does my wood stove burn so fast?

1. The air vents are open to an excessive degree. It is possible that the air vents on a wood stove are left open too much, which is one of the primary reasons why wood burns so quickly. It is possible that if you leave the air vents on your wood stove wide open, the considerably increased airflow inside the stove will cause your fire to burn through the wood more quickly.

Are tent stoves safe?

The extreme heat generated by one of Wall Tent Shop’s wood stoves will cause any flammable materials in the immediate vicinity to explode.

Try to store aerosol canisters such as bug spray, hairspray, or any other aerosol product on the opposite side of the tent.

How to use a Wood Burning Stove in your Tent

Ever thought about how to operate a wood-burning stove in your tent? We make an attempt to answer that question. To remain warm when camping throughout the cooler months of the year, we rely on blankets, appropriate clothes, and higher-quality sleeping bags, among other things. It’s possible to heat your tent with an Electric Hook-up and anything as simple as a fan heater or the little Bambino radiator, but there’s also another option: a wood-burning fire.

Using a Woodburning Stove in your Tent

A plume of smoke is rising from the chimney of our Robens Kiowa Tent. The practice of using a stove in your tent is referred to as ‘Hot Tenting,’ and trust me when I say that a decent stove can make your tent really toasty. A stove, on the other hand, cannot be placed in any tent. The tent will most likely need to be canvas or polycotton, and it will need to have an opening for the hot flue pipe (also known as the ‘chimney’). When it comes to fire, take reasonable measures.

Isn’t using a stove in your tent dangerous?

Yes, you must take reasonable efforts to protect yourself.

Sensible fire precautions when using a stove in your tent

  • A flame retardant mat will need to be placed around the stove in case any hot embers are released during the cooking process. For the best results, many manufacturers recommend that you roll back the groundsheet of your tent and place the stove directly on the ground. The top of the flue should have a spark arrester to keep hot sparks from dropping on the tent
  • A spark arrester is also recommended. You’ll want to keep flammable goods away from the stove since they can become quite hot
  • You’ll need to have a method of putting out any fires on hand at all times.

With the groundsheet folded back, the stove looks like this: Additionally, you’ll want to make sure that any little children’s hands are kept away from the hot stove top while it’s burning.

The dangers of Carbon Monoxide when using a tent stove

In the wake of numerous terrible fatalities caused by campers who brought BBQs that were still hot inside their tents, we’ve been running a long-running campaign to raise awareness about the hazards of carbon monoxide when camping. The key difference between a proper tent stove and a campfire is that the bulk of the gasses should be directed out of the tent and up the chimney. There are several concerns, however, that you should take into consideration.

  • Your tent must have adequate ventilation. When the stove is hot, it will make no difference whether or not you have the door open. Ideally, your tent should be constructed in such a way that air can flow freely through it, ensuring that you have a constant supply of fresh air. Don’t forget to turn off your stove at the end of the day. I’m aware of several campers that manage to do so without incident, but I’m not willing to take any chances with my family, and I recommend that you do as well

When leaving your stove on all night, you’ll need someone to keep an eye on it and make sure there’s still enough airflow. Because you should still have adequate sleeping bags, clothing, and insulation, not having it on at night shouldn’t be a big problem. When you slip into your sleeping bag, your tent may still be warm from the previous night’s activities.

So with all the precautions, why would you want to put a stove in your tent?

Warmth. Cosiness. The ability to prepare meals. Getting the stove to burn was the first step. When you use a stove, you may make your canvas or polycotton tent really warm and pleasant. When we recently tried the new Robens Volcano stove, we found it to be a little too heated at times. The first time we’d ever sweltered in the tent despite the fact that it was raining, windy, and freezing outside was that night. The stove may provide far more heat than a small electric fan heater or an oil-filled radiator of similar size.

The tent stove’s hot surface makes it an excellent spot to cook with a kettle and other small appliances like a pan, griddle, or pot.

Consequently, when the weather outside isn’t cooperating, a stove may transform your tent into a storm-proof shelter.

Which tent stove did we use?

This particular stove was a Robens Volcano Stove, which comes with all of the components required to accommodate the tall Robens tipi tents, as previously indicated. There are other identical stoves available, most notably the Frontier Stove, however you may need to purchase extra accessories, such as more flue sections, a spark arrester, and a heat guard, to complete your installation.

The following is the whole evaluation of the Robens Volcano Stove. The Robins Kobuk Stove has been replaced by the current model. $ 14.95£ 223.90 £ 14.95£ 223.90

Adapting your tent to use a Wood-Burning Stove

Remember that this is not something we have done, as our tents are equipped with everything you need to cook with a stove. However, we have included some notes for you to go through if you are interested in learning more about how to modify your tent to accommodate a stove. The flue pipe is protected by a cloth sleeve in the tents we have available. The flue pipe, on the other hand, must have a heat shield. These are suspended from the top of the flue pipe by chains, which are connected to the spark arrester, which is another crucial component of your stove’s installation.

The heat shield and spark arrestor both contribute to the protection of the tent.

But if you don’t already own one, you may purchase a variety of accessories for different stoves, like as the park arrestor shown below, which is available on Amazon, or the tent heat screen sleeve, which is also available on Amazon.

Making the hole in your tent for the flue pipe

For the record, I’d like to emphasize that this is not anything we’re responsible for. The following are some possibilities for those of you who are bold enough to take on the task yourself. 1

Solid Flashing (or ‘Stove Jacks’ as called in the US)

A sturdy attachment point for your tent, with a silicone-rubber outlet through which you may poke your flue. These bolts are used to secure a tent entrance that you have created. If you want to match the pitch of your tent’s roof, you may order them at various angles. The following is an example that I discovered on Amazon. An example of solid flashing used for a tent may be seen here. (Image courtesy of Amazon) I also discovered this tent stove kit on Amazon, which included all of the necessary flue pipe components as well as a flashing kit.

This tent stove package from Amazon appears to have everything you could possibly need.

On YouTube, there’s a wonderful video that explains you how to properly install one of these.2

Fire-Resistant Fabric

Another option is to cut a hole in the wall and cover it with fire-resistant cloth. Creating a wider hole in your tent for this sort of flue exit is a major pain in the neck. However, I believe it offers a lot of benefits, including the following:

  1. It features a flap that can be closed to keep the opening closed when not in use. In general, we don’t use our stove in the summer, so this would be an excellent option for keeping the tent useable all year. You have the ability to customize the entire size to meet your requirements, regardless of the angle of your tent’s roof. When using the sample below, you may use it with or without the fire-retardant fabric, which can be velcroed in or out as needed. In addition, your tent does not have any lumpy metal, which might cause complications (and even damage) while putting up your tent, moving it, or storing it

Here’s an example from Amazon that I found useful. Take a look around; there are many other solutions available for this.

This option provides you with a great deal of versatility in terms of where you set your stove and allows you to use your tent all year long. (Image courtesy of Amazon) It’s important to remember that cutting a hole in your tent to accommodate a flue pipe may void your tent’s warranty. 3

Through an open window

This could be a viable alternative to cutting a hole in your tent wall. In some cases, depending on the form of your tent, you may be able to pass the flue pipe through an open window. For this reason, it may be necessary to install a flue pipe that does not simply ascend in a straight line. However, keep in mind that you must ensure that this does not cause your stove to become unsteady, and you may not find the up-draft to be as effective as you would want. Here’s another excellent video from CanvasCamp that will give you a better understanding of this other choice.

See also:  How Much To Rent A Tent And Chairs

Getting someone else to fit your stove flue

If you don’t want to create the hole in your tent yourself, there are a lot of firms that specialize in canvas tent repairs and customisations that you may hire. Here are a few people that you might wish to get in touch with.

  • Specialist Canvas, Outdoor Sewing Solutions, Attwoolls Outdoors, Canvas Repair Center, Vintents, and other related products and services.

Get the Family Camping Planner

You will receive the family camping planner once you have entered your name and email address.

DIY Stove Jack for Tents (10

The Luxe Stove Jack system makes it feasible to install a wood stove in practically any steep walled shelter, even outfitter-sized tents, that can accommodate 2 to 16 people. Works with ripstop nylon, silnylon, canvas, and various types of tent materials, among other things. This product is excellent for DIY and MYOG sewing projects! When working with tent materials, it is critical to utilize a stove jack, as the majority of tent fabrics would melt if they come into direct touch with a red-hot chimney pipe.

Made in the United States of America!

Check our Luxe Tipis with Stove Jacks for more information.

About Tent Stove Jack

This product is sewed into the tent wall and then replaced with a heat resistant silicone/fiberglass material to complete the tent wall replacement. Then, using a sharp knife or scissors, you may simply cut a hole that is slightly bigger than the circle of the wood stove’s chimney pipe, if necessary. Extra rain flaps and a waterproof cover may be included in the kit to assist in diverting rainwater away from the shelter while the stove is in use, or the rain cover may be used to help seal the hole while the stove is not in use, depending on the situation.

Stove Jack Specs

  • Shelter Size:2 – 16 Person| Outfitter Size
  • Compatible Tent Fabrics:Ripstop Nylon, Silnylon, Polyester, Silpoly, Canvas, and others
  • Shelter Size:2 – 16 Person| Outfitter Size
  • Only one Stove Jack Kit is included, and its dimensions are as follows: 10″ (width) x 14″ (height) rectangle| 16″ (width) x 16″ (height) square
  • Silicone and woven fiberglass are the primary materials used. Stove Jack Hole: You must cut the hole to the appropriate stove pipe size. Example of 3 inches to 5 inches indicated| +6″
  • 3 inches to 5 inches suggested Kit Total Weight: 4.36 oz| more information. Pre-cut Velcro strips, commercial quality basting tape, a pre-sewn stove jack, and a ripstop polyester rain cover are some of the items that may be included in the kit.

Note: This item is made in the United States. It is possible that the color will differ. Standard size is not suitable for use with stove pipes larger than 5″ in diameter or in close proximity to the fire box. Make certain that any access material is kept away from your specific stove pipe (there should be a small gap).

What Is A Stove Jack In A Tent- Best Guide 2022

In a tent, what exactly is a stove Jack? Jacks, camping isn’t complete unless you have a stove. In a tent, what exactly is a stove Jack? These handy little devices allow you to save both space and weight while also preventing your stove from tipping over on uneven ground or when traveling. Check out the instructions below on how to put one together if this sounds like something that would be useful to you. as well as how to construct a tent stove jack First, go to your local camping store or internet merchant of choice and get a Stove Jack for your stove.

After that, put the jack into position behind the burner area of your stovetop.

Once the device has been correctly placed, double-check to ensure that It’s no longer required to be concerned about how to attach a stove jack to a tent structure.

What is a stove Jack in a tent- Best Guide

Consider the following scenario: you and your pals are in the woods for the weekend, camping out there. When you wake up in the morning, the weather is bitterly chilly. The fire in your camp stove is burning brightly, but the weather outside is very cold. Because it’s really chilly outside and you’re extremely cozy inside your tent, you’re not going to poke your head out of the door. You are unable to go to the restroom because you do not wish to venture outside in the freezing weather. You’ll need a means to stay warm and go to the restroom without having to leave your tent, so plan beforehand.

2.How do I use the stove jack?

A stove jack is a piece of equipment that is used to cook meals over a campfire utilizing the heat generated by the fire. Almost all stove jacks are comprised of a steel or aluminum frame with a mesh top and a central mounting pole that is attached to the wall. When utilized above the tent’s floor or in an elevated position, a stove jack may be quite useful. In most cases, the stove jack is delivered separately from the tent, although certain types are meant to be mounted directly to the tent.

3.How to install a stove jack in a tent

A stove jack is the most effective method of allowing you to operate a stove inside a tent without having to leave the tent. As the name implies, it is made up of a metal tube that is buried in the ground and supported by a wooden base. In order to utilize a stovepipe inside a tent or cabin, it is necessary for the jack to have a stovepipe coming from the top of the jack. A hole large enough to accommodate the stove jack must be dug before the stove jack can be installed. installation of a stove jack After that, insert the stove jack into the hole (make sure the base is at least six inches into the ground).

4.What are the benefits of using a stove jack?

The following are the advantages of using a stove jack in a tent: The stove serves as the focal point of the tent. It is at this location when the magic happens. It is in this area that the tent’s warmth is created. It’s the place where you prepare your meals, as well as where you boil the water for your tea. Having a stove inside a tent, on the other hand, might turn your tent into a catastrophe zone. When you are attempting to set up your tent, you will notice wood shavings all over the place.

This is due to the fact that the stove is being used in an area where it is not intended to be used with a stove.

It is possible to use the stove jack to mount a stove outside of the tent.

5.What are the different types of stove jacks available?

Stove jacks are available in a variety of configurations and styles. To vent your stove, you can utilize the little circular vents on the side of your tent or stove that are located on either side of the tent or stove. A wide range of sizes, colors, and combinations are available for stove jacks to suit your needs.

Determining which stove jack to use is critical because you must guarantee that you have adequate fuel to start and maintain the operation of your stove. The stove jack may also be used to vent air outside of your tent while still keeping the stove going at the same time.

Best Tents With Stove Jack

Tents Weight Packed size Height Shape Season Occupancy
Whiteduck Regatta Canvas Tent: canvas camp stove jack 77 lbs (34.9 kg) 46” x 15” x 15” (117cm x 38cm x 38cm) 118” (300cm) Bell Four season family camping 8 person (63 people also available)
Whiteduck Avalon Bell Tent With Stovejack 125 lbs (56.7 kg) 47” x 16” x 16” (119cm x 41cm x 41cm) 118” (300cm) Bell Four season family camping 8 (6 person also available)
Playdo Waterproof Canvas Bell Tent 77 lbs (34.9 kg) 45” x 14” x 14” (114cm x 36cm x 36cm) 118” (300cm) Bell Four season family camping 6 (2, 4, 8, and 10 person models also available)
Danchel Canvas Yurt With Stove Jack: how to install a stove jack in a canvas tent 83 lbs (37.6 kg) 45” x 14” x 14” (114cm x 36cm x 36cm) 120” (305cm) Bell Cold weather family camping 6 (24 person also available)
Russian-Bear Four Season Hot Tent 55 lbs (24.9 kg) 55” x 12” x 12” (140cm x 30cm x 30cm) 74” (188cm) Dome Hot Camping For 1 5 (3 and 8 person models also available)
OneTigris Tegimen Hammock Tent With Stove Jack 6.8 lbs (3.1 kg) 21” x 6” x6” (53cm x 15cm x15cm) 74” (188cm) A-frame Hammock camping 3 person

6.How do you choose the right one for your tent stove?

A tent stove jack is an essential component of your tent, especially if you intend to use a stove while you are camping. The use of stoves in tents is not only beneficial for heating up your tent on chilly winter evenings, but they are also beneficial for cooking in tents as well. Many of the stoves on the market now can also be used as a grill, which is a convenient feature. But, most stoves are toobig to fit inside a tent, especially with a tent entrance open. The stove jack is attached to the tent’s ceiling, and the stove is placed directly on top of it to prevent it from falling down.

An connected hook or a clamp will be used to hold the stove jack in place on the edge of the stove’s surface.

It is not always required to use a hook or clamp.

7.What are the different ways to install your stove jack?

If you want to utilize a stove inside your tent, a tent stove jack is an essential component of any setup. Stoves are excellent for heating up your tent on those chilly winter evenings, but they are also excellent for cooking in your tent when the weather becomes colder. In today’s market, many of the burners may also be used as a grill. However, most stoves are too large to fit inside a tent, especially if the tent entrance is left unlocked. The stove jack is linked to the tent’s ceiling, and the stove is placed directly on top of it to prevent it from falling through.

An connected hook or a clamp will be used to hold the stove jack in place on the edge of the stove’s edge.

It is not always required to use the hook or clamp.

8.What kind of accessories do you need to install the stove jack?

In order to place your stove inside your tent, you must install a stove jack. A stove jack is an attachment that is fitted in an aperture in the tent wall. In order to accommodate particular tent models and tent models from specified companies, a stove jack must be purchased separately. As a result, it is critical that you order the correct stove jack for your tent and that the material of the tent stove jack is of high quality. When tent camping, it’s also a good idea to bring along a stove jack kit.


It is possible to link the tent to the stovepipe through the use of stove jacks, which are holes in the tent or tent floor that are installed there.

The opening allows you to use your stove inside your tent. In your tent, you may use the stove jack to heat up the tent and prepare meals and drinks. FAQs:

Can I put a stove Jack in any tent?

In fact, a stove jack may be installed in any tent. Your tent, on the other hand, would need to have a solid surface on which you could put the stove jack with confidence. You’ll also want to make sure that putting the jack in the tent won’t make it unstable, because the jack will take the weight off the bottom of the tent, which can make it more top-heavy, and you don’t want that to happen. Depending on whether you are camping in the snow or on the summit of a hill, the tent may be OK with the jack.

How do you jack up a stove tent?

By employing the stove jack lifts, you may raise the height of your stove. This particular model features a handle as well as a hand crank that you use to raise the firebox. The best place to find stove jack lifts is on eBay, but you may also find them at your local sports goods store.

Is it safe to use a stove in a tent?

The first thing that you should look for in a fireplace or stove is a safety feature that is built in. When purchasing a fireplace or stove, be sure that the unit has an automatic shut-off mechanism in case it is accidentally tipped over. Following that, you should determine whether or not the fireplace or stove has been UL-approved. This will guarantee that the fireplace or stove may be used without risk of injury. The wood-burning fireplace should be equipped with clear instructions on how to use it, as well as safety precautions to keep everyone safe.

How does a tent stove work?

A tent stove works by igniting solid fuel, such as wood, in a small, enclosed enclosure to provide heat. It is comparable to a wood-burning fireplace, except that it has four walls, a roof, and no chimney to burn wood in. Tent stoves are also equipped with a mechanism for controlling the quantity of oxygen that is introduced into the fire and the amount of smokey exhaust that exits the stove. For the most part, the stove is constructed of cast iron, aluminum, or some other sort of metal. Some of the more recent types are constructed of glass, however they are more prone to breaking than the older models.

Leave a Comment

Your email address will not be published. Required fields are marked *