How To Build A Tent Pad

Tent Pads And Tent Camping • Campetent

Contact an electrician if you have any inquiries about electricity in your grow business. Find an electrical engineer who has prior experience in the construction of grow rooms if your case is more complicated. If you have any questions regarding our energy-efficient humidity management systems, you may call our specialists at 1-800-972-3710. Find providers in your area who sell the Anden A710 Grow-Optimized Dehumidifier to find out more about this product and its features.

  • A surface that is level and even to allow for pleasant resting
  • In the case of rain, a raised surface will prevent standing water from accumulating around the tent’s base. As an added bonus, retaining timbers deflect any flowing ground water around the tent pad. In the event of heavy rain, there is far reduced chance of the tent floor flooding. The tent pad fill contains no large rocks or tree roots, and it is suitable for use with tent pegs, even if the campsite itself is on rocky terrain. The compacted, flat surface reduces erosion, improves drainage, and prevents the surface from becoming mushy and muddy after most rainfall. The defined area helps to prevent damage to the rest of the campsite as a result of the constant staking of tents in the area. The demarcated area helps to prevent tent floors from destroying plants in other parts of the property, which is beneficial.

Tent Pad Surfaces

To make sleeping more comfortable, a flat and equal surface is required. Standing water should not accumulate around the tent foundation when it rains, hence there should be a raised surface. As an added bonus, retaining timbers deflect any flowing ground water around the tent pad; In the event of heavy rain, there is far reduced chance of the tent floor flooding; Despite the fact that the campground is rocky, the tent pad fill has no large rocks or tree roots and may accommodate tent stakes.

It is important to establish a tent staking area in order to safeguard the remainder of the campsite from damage caused by tent staking during the day.

Packed dirt

It is necessary to have a level and even surface to sleep comfortably. In the case of rain, a raised surface will prevent standing water from accumulating around the tent foundation. Groundwater is diverted away from the tent pad by retaining timbers. In severe rain, there is a much reduced chance of the tent floor flooding. Despite the fact that the location is rocky, the tent pad fill has no large pebbles or tree roots and accepts tent stakes. The compacted, flat surface reduces erosion, improves drainage, and prevents the surface from becoming mushy and marshy during most rainstorms.

Having a demarcated area helps to prevent tent floors from destroying plants in other parts of the property.

Sandy soil

When filling tent pads, it is common to come across sandy dirt. The blend of soil and sand holds pegs in place nicely and drains better than compacted dirt. Even in good weather, sand can track, so campers will need to take precautions to keep their tent’s floor as clean as possible. Because sandy soil absorbs water more quickly than packed dirt and does not compact as tightly as packed dirt, stakes in this type of fill are more prone to go loose after moderate to severe rainfall. Stakes that are longer in length help alleviate this problem.

Sand

When filling tent pads, it is common to come across sand. The blend of soil and sand holds stakes in place nicely and drains better than compacted dirt. Even in good weather, sand can track, so campers will need to take precautions to avoid their tent’s bottom from becoming dirty.

As a result of the fact that sandy soil absorbs water more quickly than packed dirt and does not compact as tightly as packed dirt, stakes in this type of fill are more prone to go loose after moderate to heavy rainfall. This can be resolved by using longer stakes.

Pea gravel

Despite the fact that pea gravel is not commonly found in tent pads, it provides a very pleasant surface for tent camping. During heavy rains, the tiny, rounded stones drain efficiently and prevent muck from accumulating around the tent. Because the stones do not have any sharp edges, there is minimal chance that the bottom of the tent floor will be damaged as a result of the stones. Tent pegs of standard size may be driven into pea gravel.

Gravel

When it comes to tent pads, you won’t find pea gravel very often, yet it creates a really comfy surface for tent camping. When it rains, the tiny, rounded stones help to drain the water and keep the muck away from the tent. Because the stones do not have any sharp edges, there is minimal chance that the bottom of the tent floor will be damaged as a result of their placement. It is possible to drive tent pegs into pea gravel using standard tools and techniques.

Sand and gravel

A tent pad can be filled with sand and gravel, which is a suitable material. The sand fills in the gaps between the pebbles and smoothes out the surface’s roughness.

River rock

When it comes to filling a tent pad, sand and gravel are excellent options to consider. The sand fills in the gaps between the pebbles and smoothes out the surface roughness.

Tent pad surface tips

Tent campers may observe that certain tent pads with a fill that drains well will have a tile pipe that feeds out the downhill side of the pad to aid in the drainage of water away from the tent pad during heavy rains and thunderstorms. Campers should enquire about the surface of the tent pads at a campsite before arriving so that they may carry the appropriate supplies to pitch and protect their tents.

Tent Pad Sizes

Large differences in size exist between tent pads based on where you live in the nation and whether you are hiking or just enjoying a weekend at the campsite. Despite the fact that there are no standard measurements, tent pads are frequently square in shape and are available in the following sizes:

Small (8′ x 8′)

Depending on where you live in the nation, and whether you are backpacking or enjoying leisure camping, the size of your tent pad might vary substantially. However, despite the fact that there are no standards in terms of measurements, tent pads are typically square and come in the following sizes:

Medium (10′ x 10′)

A medium-sized tent pad may accommodate a family tent that sleeps up to six people. Back in the day, leisure tents were much smaller than they are today, and a tent pad measuring 10′ by 10′ was spacious enough to accommodate the majority of family tents from that time period. Old national park campsites and campgrounds on the west coast still have tent pitches this size, which is frequent in the summer.

Large (12′ x 12′)

A big tent pad may accommodate a family tent that sleeps up to eight people. At the eastern United States, tent pads of this size are more prevalent in campsites near the Appalachian Mountains, although they may also be found in other regions of the country.

X-Large (15′ x 15′)

An x-large tent pad can accommodate many people, including a family tent that can accommodate up to ten people.

These are frequently seen in modern campgrounds and are large enough to fit the majority of today’s larger family tents. Tent pads of this size are widespread at campsites around the Midwest, but they may also be found in other regions of the country as well.

Tent pad size tips

Each of these tent pad sizes gives approximately 50 percent greater surface area than the next lower size in the sequence. Tent cushions are also available in a number of other shapes and sizes, including square and rectangular. When it comes to tents, the same rule should be applied: a small family tent has walls that are up to 8′ in length; a medium-size family tent has walls that are up to 10′ in length; and so on. In the event that campsites and tent manufacturers come to an agreement on standard tent sizes, tent campers would have the assurance that a certain size tent will fit on a specific size tent pad at a park.

Oversize tent pads

Tent pads that are more than 15 feet on each side are considered big. These pads can accommodate family tents with a sleeping capacity of 12 to 14 people, which is pretty much the maximum size and sleeping capacity for a family tent. If necessary, this size may be utilized to set up two small to medium-sized family tents on the ground. Large tent cushions are typically rectangular in shape. A 12′ by 20′ pad, for example, might be used as an example. Large tent pads are more common at group campsites, although a large tent pad may also be seen in an individual campground every now and then as well.

The provision of enormous tent pads at individual campsites by campgrounds may be resisted since campers may be enticed to pitch up many tents on them or otherwise over-occupy the campsite as a result.

Oversize family tents vs tent pads

Family tents that are X-large and larger are typically rectangular in shape, with at least one pair of opposing walls that are 12′ or less apart. Square or rectangular tents with all four walls measuring more than 12 feet in length are often outfitter pole or outfitter frame tents, which need more pole framework than a family tent is capable of providing. Outfitter tents are often set up in the outdoors or at a group camping on a big, level expanse of flat land with no obstacles. Other examples of enormous family tents are the 3-room family tents, which can be fashioned in the shape of a “L,” a “Y,” or a rectangle, among other configurations.

If you are camping in an area with uneven ground and no large tent pad, it may be difficult to set up your tent in this area.

Sizing a tent for local tent pads

Before purchasing a new family camping tent, campers are recommended to enquire about the sizes of the tent pads available at local campgrounds. The length of the longest tent wall, rather than the area of the tent floor or the specified sleeping capacity of the tent, is the most essential element in sizing a tent to a tent pad when using a tent pad. The campers may have to pitch their tent somewhere else on the site since the length of the tent is too long for a tent pad, and the terrain may be uneven and sloping.

  • In addition, large family tents may become highly unstable in gusts more than a few miles per hour.
  • This is not frequent, and it will be noted in the campsite rules and regulations regarding the setting up of a tent.
  • An extra-sized tent pad does not necessarily indicate that a park will allow a big camping party to use a single spot, unless the group is comprised of a single family.
  • Unlike large recreational vehicles, tent camping vehicles can navigate about a campsite more easily, and tent campers prefer to camp away from the main road anyhow.
  • The trees to the west of the tent pad are the next best choice for providing shade for the tent during the hot afternoons.
  • A fire ring should be positioned a reasonable distance away from the tent pad and not directly in the direction of the wind.
  • Smoke from a campfire may leave an oily residue on the fabric of a tent.
  • Tent pad upkeep is important.
  • If a tent pad is not properly maintained, the low end will gradually wash out, and the tent pad will gradually develop a large slope over the course of time.
  • You should inspect the tent pad before deciding on a camping location.

Conclusion Tent pads handle two of the most difficult challenges associated with choosing a tent site: finding level, even ground to lie on and raising the ground to prevent flooding of the tent floor during heavy rain.

4 Easy Camping Structures to Build for Under $500

Planning on elevating the quality of your outdoor living area? When it comes to luring glampers to your property for a weekend escape, there’s nothing quite like a warm cabin or yurt. In order to welcome campers and glampers on your property, you should create an account with Hipcamp (it’s completely free to do so!). Here’s a short and concise guide to four easy camping shelters that you can construct yourself (yes, you!) for less than $500 dollars each. Photo taken by Lisse L. at the Sundog Natural Building School in California’s Central Valley.

1. Cob House — $400 to $500

What do you mean, you ask? Cob homes are a fantastic alternative for campsites in warmer areas since they are easy to build. Cob houses, which are constructed of organic materials and dirt, perform better in warm climates where insulation is not a concern; yet, they will undoubtedly provide that extra unique something to your room. Another advantage of cob buildings is that they are extremely energy efficient. There is no such thing as a duplicate. Allow your imagination to go wild by incorporating a few brightly colored windows.

Julie W.

2. Yurt — $400 to 500

“What do you mean?” you might wonder. When it comes to camping in warmer climes, cob huts are an excellent choice. Cob houses, which are constructed of organic materials and dirt, perform best in warm climates where insulation is not a concern; yet, they will undoubtedly provide that extra unique something to your room. Another advantage of cob buildings is that they are extremely energy efficient and environmentally friendly. A pair of shoes is never the same as another. Fill in the gaps with a few brightly colored windows to let your imagination run wild!

See also:  How Many Tables Can Fit In A 10X20 Tent

At Luna Vista Ranch in California, a photo taken by Julie W.

3. Tent Platforms — $100

What do you want to know? Cob huts are a fantastic alternative for campsites in warmer regions since they are easy to construct. Cob houses, which are made of organic materials and dirt, perform better in warm climates where insulation is not a concern; yet, they will undoubtedly provide that extra unique something to your room. Another advantage of cob buildings is their energy efficiency. There are no two alike. Allow your imagination to go wild by including a few brightly colored windows. Because these constructions are virtually entirely composed of natural and repurposed materials, they are without a doubt one of the most beautiful (and least expensive) improvements you can make to your home.

At Luna Vista Ranch in California, photographer Julie W. captured this image of the Stargazer Yurt.

4. Tiny Cabin — $300

What, exactly, do you want to know? Cob huts are an excellent choice for campsites in warmer regions. Cob houses, which are made of organic materials and dirt, perform better in warm climates where insulation isn’t a concern; yet, they will undoubtedly provide that extra unique something to your room. Another advantage of cob buildings is that they are energy efficient. There isn’t one like the other. Allow your imagination to go wild by including a couple of brightly colored windows. Due to the fact that these constructions are virtually entirely composed of natural and repurposed materials, they are without a doubt one of the most beautiful (and least expensive) improvements you can make to your home.

at the Stargazer Yurt at Luna Vista Ranch in California.

What Is A Tent Pad At A Campsite? – Van Camping Life

A lot of terminology are used when camping that you’ve probably never heard of before, which might be confusing if you’re new to the sport. A tent pad is one example of this. Would it be possible to carry this with you on your trip? As an added bonus, you may note that some campsites indicate that they provide tent pads, whilst others do not. Is it necessary to use a tent pad, and if so, what precisely are they? A tent pad is a flat area designed for the purpose of pitching a tent at a campsite.

It is also often partially or completely filled with gravel or mud.

Let’s take a look at why it’s important to select a campsite that has a tent pad if you’re planning on pitching a tent.

Tent Pads – All You Need to Know

Tent cushions can make your camping experience more enjoyable, but they are not required. The tent pad does nothing more than mark a specific place where you may set up your tent. Because the pad has been constructed to be level, this will often be the greatest location to pitch your tent at a campsite. You will no longer have to explore the site for the flattest spot, and you will not have to perform any labor because the pad is already finished and ready to be used right away. When you use a tent pad, you may avoid having to pitch your tent on roots, garbage, or uneven terrain.

  1. The wood frame is constructed in such a way that the surface will be level once the inside has been filled with soil or gravel, and it also serves to keep the filler contained.
  2. Even if grass seed is sown on the tent pad’s surface from time to time, most of the time grass gets trampled, especially at a well utilized campsite.
  3. This elevated location gives a flat, smooth platform on which to set up your tent for the night.
  4. If you don’t have enough guy lines to reach the ground, you’ll have to lengthen them or tie them to a tree or the edge of the platform to keep them from snagging.
  5. This size provides you with enough space to accommodate two tiny tents or one large family-sized tent comfortably.

To be sure, the size of the tent pad will differ from one campground to the next. If you are unsure if your tent will fit, measure the base area at your residence first. You may be able to find out the size of a tent pad at a campsite by visiting their website before you arrive.

How to Use a Tent Pad

It is simple to set up a tent pad. Place your tent in the usual manner, but within the perimeter of the tent pad to ensure that you are on level ground at all times. Due to the fact that the tent pad area is man-made, the ground is frequently softer and, as a result, it is simpler to drive tent stakes into it. The guy lines should be staked within the tent pad’s perimeter if you’re putting a rainfly on your tent, which is recommended if you’re using a rainfly. The ability to stake everything in at the same level will be much improved if you are using a raised tent pad.

When all of your lines are contained within the perimeter of the tent pad, you will be able to tell where the border is so that you may walk securely in the dark and avoid tripping over your own lines.

  • Tent pads are simple to set up and take down after use. Place your tent in the usual manner, but within the perimeter of the tent pad to guarantee that you are on level ground during your stay. In addition, because the tent pad area is man-made, the ground is typically softer, making it simpler to drive tent pegs into the earth. To ensure that your tent’s guy lines are securely staked within the tent’s pad’s perimeter if you are using a rainfly, it is recommended to stake them within the pad’s boundary. The ability to stake everything in at the same level will be greatly enhanced if you are on a raised tent pad. If the tent pad on which you pitch your tent is level with the ground surrounding it, this will assist to reduce the risk of tripping. When all of your lines are confined within the perimeter of the tent pad, you will be able to tell where the border is so that you may walk securely in the dark and avoid tripping over your belongings. Posts Associated With

Do You Need a Tent Pad?

It’s simple to set up a tent pad. Place your tent in the usual manner, but within the perimeter of the tent pad to guarantee that you are on level ground during the night. Because the tent pad area is man-made, the ground is generally softer and, as a result, it is simpler to drive tent stakes into the earth. The guy lines should be staked within the tent pad’s boundary if you’re using a rainfly on your tent, and the guy lines should be staked outside the tent pad’s border. Staking everything in at the same level will be much easier when you are on a higher tent pad.

When all of your lines are confined within the perimeter of the tent pad, you will be able to tell where the border is so that you may walk securely in the dark and avoid tripping over your own feet.

Benefits of a Tent Pad

The advantages of utilizing a tent pad are straightforward: you have a flat, level surface on which to pitch your tent, resulting in a better night’s sleep. Instead of spending your time traveling around a campsite looking for the flattest, levelest spot to pitch your tent, the campground has already done the legwork for you. The most suitable location for setting up your tent has already been determined. If you have ever set your tent in a less-than-ideal location, you are well aware of the difficulties that might arise throughout the night.

Alternatively, you may be unable to reach a comfortable posture due to a root that is digging into your back.

What if No Tent Pad is Available at Your Campsite?

Tent pads offer several advantages, the most obvious of which is that they provide a smooth, level surface on which to pitch your tent, which results in a better night’s sleep. You won’t have to spend your time roaming around a campsite looking for the flattest, levelest spot to pitch your tent because the campground has already done the hard work for you. The most suitable location for setting up your tent has already been identified and confirmed. It is possible to have a horrible night’s sleep if you have ever set your tent in an unsuitable location.

This happens a lot during the night. Another possibility is that the root poking into your back prevents you from finding a comfortable posture. When you use a tent pad, you won’t have to worry about any of these concerns, and you’ll have a lot simpler time when you get to your destination.

Why Use a Tent Pad?

At a campsite, a tent pad will be the most convenient area to set up your camping tent. The only occasion I would not use a tent pad is if the tent pad had been neglected or ruined and was no longer a flat, level surface for whatever reason. Simply determine which direction your tent’s door should face and then pitch your tent in that direction. In the event that a tent pad is offered, you should always make use of it. Apart from the fact that it is the ideal location, the campsite may also prohibit you from camping in other locations.

The practice of pitching a tent in the same location each time helps to maintain the surrounding region natural and untouched.

Does an RV Site Have a Tent Pad?

At a campsite, a tent pad will be the most convenient area to set up your tent. The only occasion I would not use a tent pad is if, for whatever reason, the tent pad had been neglected or ruined and was no longer a flat, level surface to sleep on. Simply determine the direction your tent door will face and then pitch your tent in that direction. If a tent pad is supplied, you should always set up your tent there instead of elsewhere. Apart from the fact that it is the ideal location, the campsite may not allow you to stay in other locations.

The practice of pitching a tent in the same spot each time helps to maintain the surrounding region natural and undeveloped.

Final Thoughts

The availability of a tent pad is really beneficial if you plan on pitching a tent. It offers you with a nice, level space on which to pitch your tent without requiring you to perform any of the effort. It’s just a matter of deciding the direction you want your tent to face or which way your tent will fit the best and then pitching your tent. Of course, if you have a very large tent or wish to set up numerous tents on a single tent pad, you may have some difficulties. If you have an extra-large tent, you should first measure the size of your tent and conduct some research to guarantee that your tent will fit on the tent pad offered before making a reservation at a campground.

Tent pads will always be the most comfortable area to set up your tent.

r/camping – Making a tent pad in my own woods. Advice?

On light of the current state of the nation, I decided to surprise my camping-loving family with a staycation: tent camping in our own 15 acres of woods. What would you do if you had to put up a nice tent camping area on a flat woodland location, and you had to do it quickly? However, the clay soil drains slowly, so the location I’m considering is already very level and clear. It is also not too muddy. I’m concerned since the greenery in our Maryland woodland is abundant, especially in the spring.

  • Has anybody ever constructed their own tent pad?
  • Visualize a natural clearing with plenty of shade: Although there is no grass, I would trim it short in order to get any little plants.
  • Remove as many sticks as possible and look for rocks.
  • Fine gravel (stone dust?) or even sand(?) can be used to fill in the gaps.
  • Is there anything else?
  • I have a few small handsaws, but no chainsaws at this time.

Do you think I should treat the area with a herbicide first before putting the tarp down? It’s possible that I have some roundup in the garage. Because of the shelter in place scenario, I’m attempting to avoid going to the shop as much as possible. Thank you in advance for your response.

How to Build Your Own Portable Tent Platform

It may seem strange, but a significant part of tent camping and living in the outdoors is about being able to comfortably separate your body from the elements of nature while yet being immersed in them. Consider the implications of this. Make sure you have the appropriate apparel to keep you warm and dry in the rain and cold. You prepare a tent to provide shelter for the night. You’ve even laid down ground tarps and sleeping mats to better insulate and shield yourself from the elements. Because we humans are rather fragile when compared to all that nature may hurl at us, it only makes sense to construct and maintain certain barriers to keep us safe from harm.

See also:  How To Clean A Tent With Mildew

There are times when the ground is perfectly pebbled with sharp pebbles wherever you look, and other times when the entire landscape is nothing but marsh.

For some campers, this is simply a fact of life that must be endured; for others, a movable tent platform may be utilized to their advantage.

Why build a portable tent platform

The main benefit of a portable tent platform is the ability to have convenience and comfort whenever and wherever you want it. It is especially beneficial if you anticipate spending a significant amount of time in your tent. More permanent tent structures, such as yurts, tipis, and canvas tents, are frequently placed on wooden tent platforms, and camping platforms have become increasingly popular in the world of glamping, or luxurious camping. Even if sleeping on a tent floor over rough terrain and uneven ground, or waking up fatigued to find a flooded tent, the novelty of such an experience quickly wears off.

  • Despite their expertise, even the most experienced campers have their limits.
  • Those traveling by vehicle will quickly discover that a tent is far more comfortable, while those traveling in RVs may require a “extra room” of some form depending on the amount of people traveling.
  • Those who will be sleeping in the tent will be really grateful.
  • This manner, you can quickly put it where you want it, pitch your tent on top of it, and then go from there if you so choose.
  • In addition to long-term visitors, this is also significant for campers who are substantially older or younger than the average age.
  • In comparison, the experience of someone in their 80s or even a toddler-aged camper is vastly different.

The use of a portable tent platform is highly recommended if you anticipate camping with anyone who would benefit from an additional layer of protection from the weather.

How to build a portable tent platform

There are a number various ways to construct a portable tent platform, and each one is dependent on your definition of portable as well as your understanding of what constitutes a decent platform. It has been recommended on certain online forums that all you need is two foldable tables put up side by side and you’ll have all you need. This is not true. Of course, you are allowed to experiment with this, but it is not suggested. In this section, we will discuss two approaches to developing a platform that is more resilient and helpful.

Building a removable tent platform for a trailer

One of the most effective methods of constructing a portable tent platform is to place it on top of a trailer. There are several changes and building options available to you as a result of the readily transportable and robust basis on which you may build your structure. This example will show you how to build a temporary tent platform on top of a 4′ by 6′ trailer, which will be described in more detail later. The finished product is large enough to accommodate a conventional 7 × 7 tent and is constructed in such a way that storage space can be found beneath the platform.

  • When going on a road trip or vehicle camping, all you have to do is pull over, set up your tent, and you’re ready to go.
  • So, in order to construct this platform, you will first require a few components.
  • It may be any size you choose; all you have to do is make the necessary modifications to your own build.
  • For a trailer that is 6 feet long, you will need at least 51 feet of lumber.
  • That’s all there is to it for the wood you’ll need.
  • You’ll need a package of wood screws to help you put everything together when you’ve finished.
  • After all of this, the only thing left to figure out is what you’re going to use for the outside supports, which we’ll cover in a bit more detail later.
  • You will, however, require some basic equipment to make the process simpler.

Construction of the removable tent platform for a trailer

As soon as you have all of your materials available, it will be time to begin construction. The first item that has to be constructed is the platform’s foundation. The trailer’s base is constructed of three 2×4 supports that run the length of the trailer. One on either side of the room and one along the center. These supports will be used to attach the entire platform to the ground. A 6′ long trailer will require nine 2×4 pieces along the length of the trailer’s interior, with each section measuring 6′ in length.

  1. After that, you’ll need to cut fifteen support struts from the 2x4s you’ve gathered.
  2. To ensure a level trailer, the top piece of 2×4 should be level with the top edge of the trailer’s sides.
  3. As soon as you have screwed all of these 2×4 pieces together and placed them in their proper locations, you are ready to proceed.
  4. In order to create an inner platform, you will need to join two of the 48 boards together.
  5. You will still be able to lift the boards to gain access to the storage area beneath them.
  6. The remaining hinges will be used to join each part to the inner platform once it has been assembled.
  7. In order for these outboards to be able to fold inward, the hinges should be strategically placed.
  8. Due to the fact that these outside boards will be a little unsteady, you will need to construct legs for them.
  9. Some people have been inventive with similar ideas, and they have utilized chair legs, table legs, and even old walkers as structural support for their creations.

Whatever you choose to utilize, you’ll need something to assist support the outside platform, regardless of what you choose. You are now finished with your trailer tent platform for your portable tent platform!

A simpler construction

Following the preparation of your materials, it is time to begin construction. Construction of the platform’s foundation must be completed first. Two-by-four supports span the length of the trailer to provide a sturdy foundation. A pair on either side of the centre and one along the middle These supports will be used to attach the entire platform to the wall. A 6′ long trailer will require nine 2×4 pieces along the length of the trailer’s interior, with each section measuring 6′ in length from end to end.

You will next need to cut fifteen support struts from the 2x4s, which you will assemble as follows: This will be accomplished by placing a long portion of 2×4 down in the trailer lengthwise and attaching the struts to it, followed by laying another length of 2×4 over that and attaching the struts to it as well.

  1. At this stage, you can attach the 2×4 portions to the trailer using screws and/or brackets if you choose.
  2. By this point, you should have three 2×4 pieces built, one on each side of the trailer and one running parallel down the middle; this will serve as your foundation.
  3. Six of the hinges are used to secure these boards to the central support beam.
  4. It is necessary to cut the final 48 board along the center lengthwise before moving on to the next significant phase.
  5. By doing so, you will be able to extend the space available for your tent.
  6. Because of transportation requirements, this is required.
  7. Legs that swing down can be attached with the use of hinges and extra 2x4s.
  8. It does not matter what you use to stabilize the outer platform; you will need something to do so.

Modifications for your tent platform

Once you have invested the necessary effort to construct a DIY portable tentplatform, you can begin to enjoy it to its full potential. If you look around the platform, you’ll see that there are several small things you can make to improve its functionality and convenience of use. Here, we’ll go through some of the small details that, while simple to execute, can have a significant impact on overall operation. As you continue to work with the platform, you will undoubtedly come up with new ideas, which you should consider putting into action.

  • Short imitation grass can be purchased at places like Home Depot, and it is simple to install.
  • If you prefer wood, you may put higher-quality boards over the plywood sheets and even place a weatherproofing layer on top of that.
  • The installation of stairs or even a tiny ladder is another lovely feature that people prefer to have in their homes.
  • This may be accomplished by using miniature pool ladders or folding metal stairways, among other things.
  • After a long day of trekking that has left you feeling particularly exhausted and worn, you’ll appreciate the fact that your tent is only a handful of little steps away.
  • The movable tent platform for a trailer is equipped with hinges that allow you to access the area beneath it, but you can do much more with it.
  • You may get creative with other ways to gain access to the space beneath your platform if you choose.

Attachment points for baskets and other add-ons, as well as hooks for displaying items, are all options.

As your DIY carpentry and construction abilities improve, you will notice an increase in the number of options for creativity and originality.

There are a variety of battery-powered outdoor lighting choices that you may incorporate into the platform.

Beyond simply being aesthetically pleasing, this also serves as a valuable source of illumination when camping, making the platform and tent more visible at night.

With the addition of carpets, stairs, additional holding places, and lights, the movable tent platform transforms your tent into a true home-away-from-home experience for guests.

You now have yourself a camping front porch. Alternatively, a gas-powered or do-it-yourself camping stove, as well as a cooler, may be used to create an outdoor kitchen. An advantage that may be capitalized on time and time again is the availability of a movable tent platform.

Final Verdict:

With a few basic carpentry skills and a little imagination, you can construct a portable tent platform that is both sturdy and functional. Camping will become a far more relaxing experience as a result of the platform. With only a few inches of wood and a few hours of construction work, you will be able to get away from tough terrain, flooded campsites, pests, and animals. You will be able to take full advantage of the wonderful outdoors. A tent platform, such as this one, may also be a really wonderful way for less experienced campers, elderly campers, and very young campers to enjoy camping without having to rough it as much as they would otherwise.

Even if you don’t have one, you can still construct an excellent tent platform.

Do you have any suggestions about how to make it more helpful and comfortable for yourself?

Regardless of the platform you create, make it yours.

How to Build A Wall Tent Platform

With a few basic carpentry skills and a little imagination, you can construct a portable tent platform that is both sturdy and convenient. Camping will become a lot more relaxing experience as a result of the elevated platform. Using only a few inches of wood and a few hours of construction work, you will be free of hard terrain, flooded campsites, pests, and other creatures. Enjoying the great outdoors will be a breeze thanks to your newfound freedom! A tent platform such as this may also be a really wonderful way for less experienced campers, elderly campers, and very young campers to enjoy camping without having to rough it as much as they would otherwise have to.

If you don’t have one, you can still create a decent tent platform.

In order to make it more helpful and pleasant for yourself, consider the following: Carpeting, stairs, additional storage, and lighting were among the topics we discussed.

Observe how one family builds up a huge tent platform and camping space that can accommodate the entire party as an added bonus.

What you’ll need

Before you begin building, gather the following materials, which can be acquired at any local hardware shop with relative ease.

hardware

  • (1) Post top connection (Yardistry YP21012)
  • (18) Joist hanger for single 2′′ x 6′′
  • (1-2 boxes) exterior wood screws or nails
  • (1) post top connector (Yardistry YP21012)

Foundation

  • Flat surface
  • (9) 4′′ x 4′′ posts, trimmed to length
  • (1 bag) gravel fill
  • (1-2 bags) concrete, for a more stable foundation
  • (1-2 bags) concrete
  • (9) Concrete deck blocks (for use only on a slanted surface)

BeamJoist

  • (1) bag of gravel fill
  • (1-2 bags) concrete for a more permanent foundation. (9) 4′′ x 4′′ posts, trimmed to length
  • (1 bag of gravel fill)
  • (1 bag of concrete for a more permanent foundation. Deck blocks (only for sloping surfaces)
  • (9) concrete deck blocks
  • (10) concrete deck blocks

Floor

  • A flat surface
  • (9) 4′′ x 4′′ posts, trimmed to length
  • (1 bag) gravel fill
  • (1-2 bags) concrete, for a more permanent foundation
  • (1-2 bags) concrete
  • (9) Concrete deck blocks (for use exclusively on inclined surfaces)

Setting the posts

  1. Locate a level surface and outline a 12-by-16-foot space for the platform. In order to accommodate beams, posts must be placed 1 1/2″ from the outer corners. Locate the Middle Posts in accordance with the dimensions provided below. It is recommended that the center post be 5 1/2″ shorter than the rest of the columns in order to allow the center beam, which will rest on the post top connector. Once the location of the posts has been determined, dig a hole at least 6″ deep. Place the post in the ground and cover with gravel to improve drainage.

Attaching the perimeter

  1. Discover and designate a flat space 12′ x 16′ for the platform
  2. To accommodate beams, posts must be spaced 1 1/2″ apart from the outer corners. The Middle Posts should be located according to the dimensions shown below. It is recommended that the center post be 5 1/2″ shorter than the rest of the columns in order to allow the center beam that will rest on the post top connector. Locate the location of the posts and dig a hole at least 6 inches deep. In order to improve drainage, place the post and fill with gravel.
See also:  How To Make A Cat Tent

Adding the joists

  1. Locate a level surface and designate a 12-by-16-foot space for the platform
  2. In order to accommodate beams, posts must be spaced 1 1/2″ from the outer corners. Locate the Middle Posts in accordance with the dimensions provided below
  3. It is recommended that the center post be 5 1/2″ shorter than the rest of the columns in order to allow the center beam, which will sit on the post top connection. Once the location of the posts has been determined, dig a hole that is at least 6″ deep. Place the post and cover it with gravel to improve drainage.

Placing the floor boards

  1. Locate a level surface and designate a 12′ × 16′ space for the platform. In order to accommodate beams, posts must be located 1 1/2″ from the outer corners. Middle Posts should be located according to the dimensions mentioned below. The center post should be 5 1/2″ shorter than the rest of the columns in order to allow the center beam, which will rest on the post top connector. Once the location of the posts has been determined, dig a hole that is at least 6 inches deep. Place the post in the ground and cover with gravel to improve drainage

Application of platform deck boards in 1216

adding an Outrigger

Applicability of the 1216 platform deck board

Still looking for the perfect wall tent?

Get started by looking through our most popular canvas wall tent designs. After all, adventure is only around the corner.

Make a Tent Footprint

I had recently purchased a new ultralight tent, and after seeing how pricey footprints were, I set out to create my own set of feet. A footprint is an essential piece of ground protection for extending the life of your tent for as long as possible, especially for ultralight tents, which are notoriously delicate due to their thin weight. Tyvek was chosen because it is lightweight, waterproof, and long-lasting. What’s amazing about producing your own footprint is that it costs half as much as buying one, is quite simple, and can be customized whatever you like.

Are you ready to create your own?

Step 1: What You Need

Tyvek sheet – I was fortunate in that my employer provided a roll, although those are pricey. This website offers reasonably priced sheets, and I’m confident that there are additional fantastic discounts to be found on the internet. Large eyelets/grommets, as well as a tool for setting them The fabric is a little piece of canvas. a pair of scissors and a hammer

Step 2: Prototyping

Fortunately, my employer provided me with a roll of Tyvek sheeting; but, they are costly. This website offers reasonably priced sheets, and I’m confident that there are additional fantastic discounts to be found on the internet at other times of year. Setting tool, as well as large eyelets/grommets. Canvas cloth in a small size. The scissors and hammer are both in the same drawer.

Step 3: Lay It Out

Tyvek sheet – I was fortunate enough to find a roll at work, but they are pricey to purchase. This website offers reasonably priced sheets, and I’m sure there are additional fantastic discounts to be found on the internet. Large eyelets and grommets, as well as a setting tool A little piece of canvas cloth was used. A pair of scissors and a hammer

Step 4: Add Grommets

Prepare the grommet by cutting off small pieces of fabric reinforcement and a hole through both layers of fabric that will accommodate it. Insert it into the frame, insert the backing on the opposite side, then hammer it into place using the provided tool. Please keep in mind that I did a bad job on this. I didn’t have the proper backing or tool for these, and while I was successful in fastening the grommets, the results weren’t really attractive. Take a look here for a more detailed instruction on how to add them with far better results.

Step 5: Add Vestibule Wings

Following that, I built wings to either side of the footprint to protect bags and gear stored beneath each vestibule, because my tent is so small that two bags would not fit inside and the most of my goods will be stored outside the tent. I made educated guesses about the form, knowing that it would be simple to trim afterwards, and then stitched both sides to the middle piece together. When not in use, they may be tucked away beneath the tent.

Step 6: Done!

That’s all there is to it! Get out there and take pleasure in your newfound fame!

Be the First to Share

Deck DesignsIvy Fife2021-12-20T11:59:47-07:00

Deck Plans

You may set up your tent on a platform that fits the footprint of the tent, or you can extend the deck to create a front porch, which will provide you with some really usable outdoor living area. Building the platform can be done by you or by a third-party contractor. You have the choice to choose. But don’t forget to put your unique stamp on it! We supply some basic drawings for your platform tent, as well as the necessary measurements. You have the option of customizing your platform and ridge pole to suit your needs and tastes.

  • You may set up your tent on a platform that fits the footprint of the tent, or you can extend the deck to create a front porch, which will provide you with valuable outdoor living area. Either you or a contractor may create the platform for you. You are free to choose. Don’t forget to put your unique stamp on it! Our platform tent designs are simple and provide the necessary proportions. To suit your own needs and tastes, you may personalize your platform and ridge pole. The following deck layouts are available by clicking on the tent’s measurements: Plans for a Patio or Deck 12×1414×1616×20 deck plans with an extension of 12 x 14 and 8 x 8 feet Decking that measures 14×16 and extends to 8 feet in length Decking measuring 1620 x 8 feet was added. A number of other documents are available. Attachment of a tent and platform a link to the page load
  • The following options are available: Yurt Covers
  • ColorFabric Selector
  • Doors
  • Windows
  • Domes/ Skylights
  • WindSnow Insulation
  • The Back.
  • Interior Design Ideas
  • Floor Plan Examples
  • Deck Designs
  • Back to top of the page
  • Pitch a Yurt, Engineering, Building Energy Codes, Technical Support, and more are all available here.
  • Quality and craftsmanship are the fundamentals. Exactly what goes into a Tipi project is unknown. Request a Brochure
  • Return to the Home Page
  • TIPI COVERINGS
  • INTERIOR CLOTH COMPONENTS (LINERS, OZANSFLOR COVERS)
  • POLES + ACCESSORIES
  • PAINTED TIPIS
  • DECK DESIGNS
  • PHOTO GALLERY
  • BACK
  • TIPI COVERINGS
  • INTERIOR CLOTH COMPONENTS (LINERS, OZANSFLOR COVERS)
  • POLES + ACCESSORIES
  • PAINTED TIPIS
  • DECK DESIGNS
  • PHOTO GALLERY
  • BACK
  • Instructions for Pitching
  • Care and Cleaning
  • Technical Support
  • Return to top of page
  • Quality and craftsmanship are the fundamentals. What is Involved in a Tent Construction Project
  • Requesting a Brochure
  • Returning to the Home Page
  • Deck Plans
  • Framework
  • Gallery
  • Back
  • Tent Covers
  • Tent Options
  • Measurements
  • Deck Covers
  • Themes: Tent Covers, Tent Options, Measurements, Deck Plans, Framework, Gallery, and the Back
  • Deck Plans, Framework, and the Back
  • Instructions for Pitching
  • Care and Cleaning
  • Technical Support
  • Return to top of page
  • Pricing for Yurts
  • Pricing for Tipis
  • Pricing for Tents
  • Blog
  • LOGO WEAR
  • Back
  • Fabric samples can be requested, as well as a brochure. Technology, specifications, and support for yurts
  • Technology, specifications, and support for tipis
  • And technology, specifications, and support for tents
  • PHONE 970-240-2111
  • KEEP UP TO DATE Sign up for our email list to receive the newest news
  • GET IN TOUCH
  • GET SOCIAL
  • GET BACK TO

0623-2801-MTDC: Accessibility Guidebook for Outdoor Recreation and Trails

CONNECT WITH US BY PHONE AT 970-240-2111 AND STAY UP TO DATE Get the latest news by subscribing to our email list GET IN TOUCH; GET SOCIAL; GET BACK TO SOCIAL

Constructed Features for Campgrounds(Continued)

The tent pads or tent platforms that are supplied at a recreation site must meet the standards outlined below and must be connected to the other main built components in the recreation area by an ORAR in order for the recreation site to be considered complete. On tent pads and platforms that are required to be accessible, a minimum of 48 inches (1,220-millimeter) of clean floor or ground space must be given on all sides of the tent on which the tent is to be set up. When a condition for departure exists, this width may be decreased to a minimum of 36 inches (915 millimeters) under the terms of an exemption.

  • No specific minimum tent pad size has been established due to the fact that the types of tents regularly used at leisure areas and GFAs vary considerably from one region of the country to another, and even within a single district.
  • When camping at a highly established park with a variety of built-in amenities for campers, large family tents may be commonplace.
  • The minimum size of tent pads and platforms for a campsite is determined by adding the 48-inch (1,220-millimeter) or 36-inch (915-millimeter) open space to the size of a typical tent and dividing the result by two.
  • In GFAs, 5 percent of the total number of tent pads or platforms must match the specifications outlined below; however, connecting to an ORAR is not necessary in this situation.
  • In a GFA, it is not uncommon to have six or seven tents clustered together in close proximity to one another.
  • It would be necessary to have a pad that is at least 13 by 16 feet in size for the same size tent with a 4-foot (1.2-meter) clean area all around in order to be accessible (4 by 4.8 meters).
  • The slope of a tent pad or platform that is accessible must not be greater than 1:50 (2 percent) in any direction.

Tent pads and platforms must have the proper proportions and slopes, as shown in Figure 63.

When a condition for departure exists, an exception from the surfacing requirement might be granted to the driver.

In accordance with the FSORAG, no edge protection is required on tent platforms.

Wherever possible, edge protection should not be installed in a way that prevents access to the platform.

The ORAR should be connected to tent platforms at ground level to provide a seamless experience.

The ORAR can either ramp up to platform level or end adjacent to the tent platform at a height of 17 to 19 inches (430 to 485 millimeters) below platform level, depending on the configuration.

An example of a method for providing an accessible tent platform in a highly developed campsite may be found in Figure 64. An elevated tent platform at a heavily developed campsite on the Coronado National Forest’s outskirts (Figure 64).

Fire Rings, Fireplaces, and Wood Stoves

They are covered together here since their provisions are relatively similar, despite the fact that they are dealt separately in different sections of the FSORAG document. In cases where fire rings and wood stoves are supplied, they must individually match the specifications listed below. It is required that when fire rings and wood stoves are supplied in recreation areas, an ORAR be erected in order to connect them to the other major constructed components in the recreation area. For fire rings, fireplaces, and wood stoves in GFAs, an ORAR is not necessary; nonetheless, it is recommended.

  1. This corresponds to the low-side reach range of the ABAAS.
  2. This exemption is made in particular for fire rings that are provided in wilderness regions and general recreation zones.
  3. Often, these fire rings are little more than basic rock circles that might be called temporary buildings suited for use in a wilderness area.
  4. Some outdoor fireplaces and custom-built fire rings are surrounded by a wall, which may be constructed of bricks or mortared stone, to contain the fire-building area.
  5. This requirement is illustrated in Figures 65 and 66.
  6. Height and reach requirements for unique fire rings are depicted in Figure 66.
  7. Because the material used to construct commercial fire rings is typically not very thick or wide, the reach to the fire-building surface is typically less than 24 inches (610 millimeters).

a clean floor or ground area that reaches at least 48 inches (1.220 millimeters) out from the ring or stove and is at least 48 inches (1.220 millimeters) broad around the whole fire ring, fireplace, or wood stove is required around all useable components of the fire ring, fireplace, or wood stove.

The clean area must be next to, but not within, the ORAR, and it may not be within the ORAR itself.

There may not be a slope more than 1:50 (2 percent) in any direction surrounding a fire ring, fireplace, or wood stove.

An exemption allows for a slope of up to 1:33 (3 percent) in any direction where it is necessary for sufficient drainage to be achieved.

If there is a valid reason to diverge from the slope and surface criteria for fire rings, fireplaces, and wood stoves, the exemption is granted.

It is required that controls and operating mechanisms for wood stoves adhere with the provisions of ABAAS sections 308 and 309, which are detailed in more detail inReach Ranges and Operability Requirements (below).

Leave a Comment

Your email address will not be published. Required fields are marked *