How To Build A Rooftop Tent

How do you Make a Roof Top Tent? (9 Clever DIY Builds)

Rooftop tents are unquestionably amazing, and there’s no denying it. You can quickly and simply transform your car or truck into a beautiful outdoor hideaway wherever the open road may take you with these portable tents that can go anywhere with you. Unfortunately, rooftop tents are prohibitively costly, making them unaffordable for the great bulk of the population. Furthermore, just because you spend a substantial amount of money on a rooftop tent does not guarantee that it will include all of the features that you desire.

Make your own rooftop tent out of tarpaulin.

It’s also the most effective method to personalize your adventure rig to be precisely what you’ve always wanted it to be.

Don’t be concerned.

There are nine different ways to construct a roof top tent: Are you interested in building your own rooftop tent, but aren’t sure how to get started?

1. Patrick Remmington Method

Patrick Remmington’s approach for building a DIY rooftop tent provides you the opportunity to build your own hard-shell shelter on the top of your automobile. Using plywood, the floor and top of the tent are both hard and protective surfaces, which are created by pressing the plywood against each other. You then connect the tent to gas springs, which allow it to open and close automatically when you arrive at camp. This allows for a rapid and simple tent setup when you arrive at camp.

While Patrick does not provide a step-by-step technique for building a tent, the fundamental principles in his methods may be used to the construction of a shelter of your own.

That’s all there is to it.

2. 410 Expeditions Method

410 Expeditions takes us on a tour of “Project Pytheas,” a hard-shell rooftop tent that they built themselves. 410 Expeditions began by hiring a local fabricator to pre-cut and bend metal for both the top and bottom of the tent, which was then assembled by 410 Expeditions. Then he enlisted the help of a friend to weld the tent’s hinges and gas springs into place. After completing the basic shell, he proceeded to construct the tent walls by repurposing a bug net from a standard tent. As a result, 410 Expeditions was able to save time on sewing by just purchasing a low-cost tent that can be pulled apart and attached to your rooftop tent shell instead of making their own.

The elegant design of 410 Expeditions’ rooftop tent is an excellent starting point for developing your own ideas for your own rooftop tent construction project, even though the company does not explicitly demonstrate how to construct one.

3. Nick K’s Method

Nick K demonstrates how to construct a hard-shell rooftop tent from the ground up in your own house in this video. He gives a comprehensive supply list, making this a fantastic resource for anyone who aren’t sure where to begin their project. This design, developed by Nick K, employs 3/4-inch plywood and corrugated plastic to construct the top and bottom of the tent, as well as gas struts to make it simple to open and shut the tent when you arrive at camp each evening. In the end, the tent’s body is comprised of 600 denier waterproof fabric that has been affixed to the tent frame using Velcro straps.

It’s possible to get nearly all of these supplies on Amazon or at your local hardware store, making this a great alternative for folks who don’t have a lot of spare time to go out and look for difficult to come by materials at specialist stores.

4. Tagayak TV Method

If you want to see a step-by-step demonstration of how to construct a rooftop tent at home, this video is for you. In an interesting twist, Tagayak TV’s technique is based on Patrick Remmington’s design, but it provides you with additional information about how to complete the process from beginning to end. Building the top and bottom frames out of plywood and 2×4 boards is the first step in this project’s construction. The top and bottom frames are then joined together at the back with the use of a hinge.

Once the structure is complete, it’s time to begin stitching the tent body together from the inside out.

However, Tagayak TV recommends practicing on waste material before working with the canvas you intend to use for your tent.

5. Camping Colorado Method

You may follow along with this video from Camping Colorado if you want to learn how to build a rooftop tent on a tight budget. Dylan demonstrates how to construct a clamshell hardtop rooftop tent out of components that cost no more than $150. His rooftop tent was constructed from plywood and gas struts, and the entire contraption was fixed to the roof of his Jeep Compass as a result of his efforts. In the following step, he cut and fastened an ordinary plastic tarp that he obtained from a local hardware shop to the clamshell’s top and draped it over either side of the container.

This gives complete waterproof protection at an affordable price. While Dylan’s tent isn’t the most visually appealing tent on the market, it does the job and is an inexpensive option to get out and enjoy the great outdoors from the comfort of a rooftop tent.

6. Raise Them Wild Method

Rooftop camping is demonstrated in this video by Raise Them Wild, who uses a Jeep Cherokee to demonstrate their technique. Construction of a tent platform was completed by the Raise Them Wild team using 3/4-inch plywood, 1/16-inch aluminum sheets, and scrap steel from an old bed frame. Then they attached hinges on the side of their vehicle, which will be utilized to deploy support beams for the underside of the platform while the platform is in use. What makes Raise Them Wild’s set-up distinctive is that they haven’t really constructed a rooftop tent for the event.

In this way, it is an excellent option for folks who do not want to waste their time constructing a tent body, however it is not a complete DIY clamshell rooftop tent solution in itself.

7. Jeremy Adventures Method

When it comes to building a DIY rooftop tent, Jeremey Adventures’ approach is very straightforward, especially if you already have a roof rack installed to your truck or SUV. Jeremy basically buys a Kamp-Rite Overside Tent Cot with a Rainfly and then attaches the entire setup on the roof of his Land Cruiser’s pickup truck. This is a really quick and simple method of making a rooftop tent that saves you from having to spend a lot of time constructing one from scratch. With Jeremy’s solution, all you have to do is figure out a way to attach the tent to the roof of your vehicle using simple clamps that you can make out of materials that are readily available at your local hardware store.

8. Apocalypse Auto Method

This video from the video game Apocalypse Auto provides you a fast overview of all the procedures you’ll need to do in order to construct your own rooftop tent. To begin, you’ll need to build a bigger platform on top of your car out of particle board and 2x4s, which you’ll then attach to the roof rack. As a further step, you’ll construct a sturdy frame for the tent out of 2x6s and 1x1s, which will allow you to adapt the platform to fit your vehicle’s roof rack. An additional piece of particle board and barn door hinges will be used to construct the tent’s lid in the following stage.

If you wanted to use gas struts instead of springs, it would be simple to include them into this design.

Final touches included a conventional large camping tent that draped down to the tailgate of a vehicle, allowing for easy access to the rooftop tent from the ground level.

9. Nomad Design House Method

Using this video, Nomad Design House demonstrates how they stretched a roof rack and constructed a rooftop tent for the top of their vehicle. They devised a straightforward extended roof rack for the top of their vehicle and then contracted with a local welder to put everything together. After that, they simply attached two pieces of plywood and a cheap pop-up tent to the rack before heading out on the open road.

In spite of the fact that there isn’t much DIY involved in this approach, other from building your own extended roof rack, it is a straightforward way to create a multifunctional platform at the top of your car that can be utilized with a variety of different tents and other accessories.

Why make a DIY rooftop tent?

To begin with, let’s consider why someone would prefer to construct their own rooftop tent rather than simply purchasing one from the internet. The following are some of the most significant advantages of building your own rooftop tent:

Potential cost savings

As previously said, rooftop tents are a costly investment. Some of the most expensive hardtop versions may easily cost you $4,000, but a “cheap” soft top will cost you at the very least a few hundred dollars more. While it is true that you will have to invest some money to construct a DIY rooftop tent, the materials cost of $100-400 will be far less than the cost of purchasing one from a factory.


When you purchase a rooftop tent online, you are forced to accept whatever the manufacturer chooses to provide for you. In spite of the fact that you may surely experiment with making some alterations to your tent after it has been delivered to you, you will not be able to select every single element of a rooftop tent when you purchase it commercially. Alternatively, if you construct your own rooftop tent, you will be able to entirely personalize it to match your specific requirements. This includes incorporating more storage, selecting the mattress you’ll be sleeping on, and incorporating other crucial aspects into your home away from home.

Disadvantages of a DIY rooftop tent

While creating your own DIY rooftop tent may seem like a fantastic idea, it’s vital to remember that it isn’t all rainbows and roses in the end. Here are a few of the drawbacks of building your own rooftop tent.

Time and effort

Making your own rooftop tent can be a cost-effective way to save money because all you need to purchase are the supplies. However, keep in mind that you will be compensating for those savings by devoting your valuable time to the building process. Construction of a rooftop tent may not be the most efficient use of your available time if you’re a busy person with little free time. Instead, it could be more cost-effective to simply purchase one rather than renting one.


The process of creating your own rooftop tent can be time-consuming and frustrating unless you’re really competent at construction or enjoy a challenge of any kind. Because there are no pictogram-style instructions available for creating a DIY rooftop tent, if assembling anything from Ikea gets you so angry that you want to rip your hair out, it may be wiser to just purchase a commercial rooftop tent instead. Following that, there will be car camping. Roof Top Tents from Front Runner Tents (Owner Review) Is it safe to sleep in a roof top tent when there are bears around?

Build This Rooftop Tent Without Even Leaving Home Depot

Andriy Wybaczynsky, a student at the University of Colorado in Boulder, decided on a whim to design and build his own DIY version of a car rooftop tent out of scrap materials. The original objective was to see whether the tent could be constructed out of readily accessible materials and for less than $100 in total cost. It happened during finals week, and he only had eight days to complete the original design and construction. He would be fortunate in that he would have the assistance of a wonderful buddy.

I had never done it before. This was supposed to be utilized on a road trip that was coming up. My first thinking was that I could do the project for less than $100. I had no idea how intense the project would become with only 8 days to complete it, so I was surprised.

A 3D design drawing showing the frame, hinges and base.

Built using a regular 4 by 8 foot sheet of plywood and hinges purchased from Home Depot, the foundation is sturdy and functional. The conduit used for the structure came from Home Depot, and the cloth used for the tent component came from The basic construction (excluding a little amount of additional padding expense) was created for less than $100, which was the intended price.

Roof top tent parts, after cutting and bending at Home Depot.

In the end, Andriy found that plywood might not be the most suitable platform for a good night’s sleep, and the additional foam cushions required increased the cost to $170, which was still less than a fourth of the cost of the lowest type of rooftop tent available for his car.

The specialized parachute stitch that was recommended online.

Because the university shop area lacked the necessary instruments, Andriy took a gamble and borrowed a conduit bender and a hacksaw from the tool rental store of a local Home Depot. It was a risk well worth taking. He then proceeded to measure, cut, and bend his pipe right there in the middle of the aisle! Additionally, a Home Depot employee cut the plywood using a panel saw on the job site.

The frame and hinges being tested, open and folded for transit.

Andriy had to learn how to sew before he could begin cutting and assembling the panels that would form the shell of his tent, which added an additional layer of difficulty to the project. Who knows, ripstop nylon might not be the first fabric option for a novice sewer, but sometimes being an amateur means you don’t know what you can’t accomplish – so you just go ahead and try it!

The nearly finished tent, ready for installation on the car’s roof.

In the end, he went with a sophisticated, double stitch parachute seam that turned out to be a bit excessive, but his research kept driving him in the direction of that choice. In addition to the translucent vinyl top, the tent’s ends and side panels are constructed of lightweight nylon, which allows campers to have a clear view of the night sky or, in the case of horror fans, whatever horrifying creature comes charging into your tent in the middle of the night.

Open tent frame, bolted to the roof rack.

When finished, the frame and platform will be installed perpendicular to the car’s length and will be secured to the roof structure with U bolts. A huge slot carved at the folded-down end of the tent gives entry to the interior of the tent via a staircase. It was then secured to the wooden platform using webbing, which was fixed to the platform with wood screws and washers to prevent the screws from pulling through.

The hard work paid off in a finished, functional roof top tent.

If you decide to follow in Andriy’s DIY footsteps, here are a few pointers to consider:

  1. To protect the tent while it is folded down in travel, I believe a tarp is necessary, and I agree that wind speeds of 70 miles per hour will shred ripstop. A good rain fly is absolutely necessary. The tarp he used made a lot of noise in the wind
  2. You’ll want to sleep on a heavy-duty foam pad or an air mattress instead. Plywood is an extremely hard material.
See also:  What Is The Best Tent For Backpacking

The finished tent, folded down for travel.

On Andriy’s website, you can see additional images and read more commentary about his construction project.

He also made a time lapse showing how the tent sets up once you get to your camping location.

It’s the desire to travel, the freedom of being on the open road. It is not the goal that is important, but rather the trip. It is on a journey around the world. You don’t need a home since when you travel, you’re already at your destination. That’s what it’s like to live in an RV. The difficulty is that organizing an epic RV vacation is a complicated process. We at RV LIFE think that life should be straightforward. As RVers ourselves, we understand the process and have assisted millions of RVers in achieving their travel goals by gaining confidence and completing their journeys.

Join the discussion in any of our fantastic RV forum groups if you have a question regarding ANYTHING connected to recreational vehicle travel.

Step 1: To learn more and to join up for the free trial, go to this link. Step 2: Make a plan for your ideal RV vacation. Step 3: Take pleasure in the wonderful recollections!

15 DIY Roof Top Tent Ideas for Car, RV, and Camper

Are you willing to save a significant amount of camping time when traveling from one location to another? Consider using one of these 15 finest DIY roof top tent ideas, which will be mounted on the vehicle’s roof and will be high enough to keep varmints at bay while providing shelter. With a DIY roof top tent built on your car, you will feel as if you are living the camping luxury lifestyle; it will quickly pop-up to provide you with a camping cottage complete with all of the conveniences you could ask for.

  • Additionally, knowing a little bit about engineering will assist you to put up these tents on the roof of your vehicle more effortlessly.
  • It’s time to experience next-level camping without breaking the budget with the help of these rooftop tents.
  • The plywood will be an excellent choice for the basis of the majority of these tents, and because of its even flatness, it will be simple to put up and balance on the roof of a car.
  • If, on the other hand, you enjoy sewing tents, you can bring along extra tenting fabric in addition to the wooden structure.
  • 10 DIY Truck Camper Plans that are easy to build
  • There are 5 DIY camper shell plans that you may use to build your own. 15 Ingenious Homemade DIY Truck Bed Camper Ideas

1. How to Build Roof Top Tent

Check out the pinnacle of DIY ingenuity right here, and grab the blueprints to build your own vehicle rooftop tent right here. The materials for this DIY roof top tent will cost you no more than $100. Plywood sheets measuring 4′ x 8′ are used to construct the tent’s foundation. After that, construct the tent structure out of conduit and select the most appropriate cloth for the tent component. DIY roof top tent will fly up to give a camp on top of your vehicle’s roof, saving you the trouble of installing a separate tent and making it extremely cost-effective to leave home depot canopy tent behind.

2. DIY Roof Top Tent – A Frame

It is impossible not to be impressed by this clever DIY build of the DIY roof top tent. The design will be completed in around 8 hours and will last for a lengthy period of time. Plywood should be used to construct the basis of the rooftop tent, with 1x4s wood boards being used to construct the elevated side border or bottom lips. After that, cut the top folding frame, mount the roof rafters and vertical supports, and lastly cover the top folding frame with 1/4″ plywood to complete the project.

Making the tent’s fabric and putting it together can be a time-consuming process that requires patience.

3. Plywood Roof Top Tent

Installing rooftop tents on your cars will take your camping experience to the next level, keeping you safe from insects and varmints while on the road. As a result, this will prove to be a wise decision in the direction of safer camping. Make use of the 4ftx8ft plywood to construct a base that is evenly level. The A-frame of the tent should be constructed out of 1×4 lumber, and the vehicle mounting structure should be constructed out of 1×6 lumber. Polyurethane should be applied on all of the wood parts.

4. DIY Rooftop Tent

You will like this rooftop tent that has been custom designed to your exact specifications and comes in the perfect measurements. Bamboo plywood, cloth, and metal tube are used to construct this rooftop tent design. Simply construct the entire structure of this rooftop tent by welding together the metal tubes; the tent should be supplied with a hinged back. Plywood should be used to completely fill the frame, and the metal tube lines should be painted white. After that, simply take the triangle fabric pieces to cover the sides and choose a rectangle piece to cover the front of the dress.


5. Handmade Roof Top Tent

Choose this nifty tent, which will fit well on the top of your camping truck and provide excellent ventilation. The majority of the components of this rooftop tent are constructed of tenting cloth. Metal tubes, wood slats, and even PVC pipes can be used to construct the structure of a roof tent, depending on your preference. Install a bed mattress inside for the utmost in sleeping and sitting comfort, and be sure to get a metal ladder to conveniently access this roof-top tent from the ground level.


6. Best Roof Rack Tent

View the intricate features of this fantastic-looking roof rack tent, which has a one-of-a kind frame. It comes with a wooden foundation to keep everything stable. Construct the tent frame out of the conduit and stakes. Finally, you can put up a tent that you may make yourself at home with basic sewing skills. It will also be possible to utilize a secondhand roof rack tent or one that does not have poles, which will be a more affordable alternative. The next step would be to attach the frame straps that may be included with the sew-on Velcro if it is available.

7. Easy DIY Roof Top Tent

The sewing portion of this project is the most important, and you may utilize the conduit to construct the frame. It is necessary to be an excellent sewer in order to complete this rooftop tent project, which includes a thin plywood base. Install the frame straps and use Velcro to cleverly hold the parts together to create a cohesive look. A metal ladder is used to get access to this simple DIY Rooftop tent, which is quite straightforward to construct. One of the most effective tent designs to construct at home.

8. Canopy Camper With Buit In Rooftop Tent

This canopy camper will undoubtedly become a favorite addition to your camping collection. It comes with a built-in rooftop tent and will offer you with all of the camping comfort you could want. You can fold out the rooftop tent from the canopy roof, and because it is located at a high elevation, you will feel extremely safe when camping in this rooftop tent. Construct the structure of this canopy camper out of aluminum tubes, and then cover it with the nicest tent fabric you can find in your local hardware store.

Build it for a camping buddy who appreciates your efforts and you’ll be commended for your craftsmanship. More information may be found hereyoutube

9. DIY Car Top Tent on Budget

Prepare for a safe camping trip by constructing this car top tent that can be completed on a tight budget. This rooftop tent has an A-frame and unfolds on a hinge to expose a comfortable inside where you can set up your bed. It is available in two sizes. Perhaps the most remarkable aspect of this project is the fact that it was installed in a regular automobile. After construction, the camp is 210 cm in length, 130 cm width, and 120 cm high. One of the greatest rooftop tents that you can rapidly construct out of plywood, 1x4s, and cloth is seen below.


10. Wild Coast Roof Top Tent

You will undoubtedly fall in love with this wild coast rooftop tent, which can be expanded to give an area that is comparable to a full bedroom plus a living room. The interior of this wild coast rooftop tent is well-lit, which helps to lighten up the entire structure. All you have to do now is construct the structure of this wild coast rooftop tent out of aluminum tubing. One of the greatest rooftop tents ever created, and you will give it a ten-out-of-ten rating. You’ll need to perform a lot of stitching here in order to complete the enormous tent for this rooftop tent.

11. Chevy Trailblazer Roof Top Tent

The free designs and directions offered above will allow you to quickly and easily construct your own personalized rooftop tents. Use these resources to get started. Take a look at this one. The Chevrolet Trailblazer rooftop tent is designed to be inspirational. Camping on a rooftop will be a breeze with the help of this pop-up rooftop tent, which will be relatively affordable and simple to construct. The foundation should be made of plywood, and the frame should be constructed of aluminum tubes.

12. Roof Top Tent Platform

The rooftop tent is a little yet attractive structure that is extremely easy to access via a ladder. It will protect your money from being eaten by a wild animal while riding on the roof of your vehicle in comfort. Install lighting and a bed in the room to make it feel more comfortable. This tent has a domed form and is constructed with a heavy-duty frame and plywood foundation for a stylish appearance. When it comes to loading it into your car, it might be a bit difficult, but not impossible if you know how to do it properly.

13. Cool Roof Top Tent

Consider being inspired by yet another stunning rooftop that will leave you speechless at first glance. The tent is built on a plywood foundation and is covered with two pieces of hinged plywood that may be folded to become a part of the base. Installing this rooftop tent will be a wise step toward a safe and luxurious camping experience, and creating this tent will not be a significant financial investment for you. One of the greatest rooftop tents for adding to your vehicle’s roof is this one.

14. Roof Top Tent for Trailer

For those who have no trouble finding parking space and who are capable of pulling a camper trailer behind their vehicle, this rooftop tent for trailer projects is an excellent choice. for a trailer project It entails mounting a tent on the trailer, which requires the construction of a metal or wooden foundation first.

Following that, just stitch the tent together with netted windows and, if feasible, put illumination inside. This tent also includes a set of lovely window treatments. It’s the finest you can get for your camping zeal. More information may be found here.

15. Napier Truck Bed Tent

Peep inside the intricate features of this Napier truck bed tent, which is quite remarkable. This stunning truck bed tent, which can be used as a huge bed when not in use, will inspire you to create your own. Build the tent’s foundation out of plywood once more, and then attach the custom frame made of aluminum tubing to the tent’s frame. The next stage would be to add a tent, which you could sew yourself if you wanted to. Finishing straps, which may or may not include sew-on Velcro, can be added.

It will not be too expensive for you to construct it at home.

Check out these easy-to-build DIY camper trailer designs to save money and reduce your camping expenses.


Are you a camper who is hooked to the outdoors? Then you will undoubtedly appreciate the fact that you are safe when camping in the wild. So, instead of putting up tents on the ground, consider using theseDIY roof top tent ideas, which will keep you secure from varmints and other animals. Roof top tents are the pinnacle of camping luxury and will be a wise investment for those looking to spice up their camping experience. It will save a significant amount of time while setting up tents. There are projects on the list that will match every budget and ability level, so check them out!

12 DIY Rooftop Tent Ideas For True Campers

Are you looking for instructions on how to construct a gorgeous rooftop tent on your own? You’ve just arrived to the correct web page. Make your own DIY rooftop tent with these 12 DIY rooftop tent projects, which will walk you through the process step by step. Although not all of the projects on this list will teach you how to build a DIY rooftop tent, the majority of them will provide you with advice that you may use to improve your current rooftop tent project. This post is a must-read for anybody searching for information on how to build a rooftop tent from the ground up.

1. Cheap Roof Top Tent

I’m starting with this inexpensive DIY rooftop tent built out of a Pop-up tent, ladder, flat bar, super strut (to attach the tent to your roof rack), a roof rack, bolts and angle iron. The second rooftop tent on my list is a simple DIY tent made out of a pop-up tent, ladder and flat bar. Make the foundation of your structure out of the length of plywood you choose, and then add your metal hinges. Metal hinges should overlap and be lined with wood. A hole should be drilled in the tip of the overlapped metal.

Cut the super strut to the appropriate length and bolt it to the board. Prepare the flat bar by drilling two holes in it and inserting bolts through them to secure the roof rack in place. Attach the tent to the roof rack using the included hardware.

2. DIY Roof Top Tent

Aluminum trim, coroplast, and a waterproof zipper are used to construct this rooftop tent, which is completely watertight. The entire project was created in the shape of a clamshell. The coroplast sheet that acts as the tent’s ceiling was positioned at an angle near the tent’s base. The tent was constructed from denier waterproof canvas, and a bar magnet was used to ensure that the cloth remained attached to the aluminum trim. Both sides of the canvas were stitched together to form a zipper that ran from bottom to top.

See also:  What Size Pots For Grow Tent

A extremely cool and impermeable rooftop tent, it is made of canvas and polyethylene.

3. How To Build A Roof Top Tent On A Budget

This is a low-cost rooftop tent that you may use to experiment with. Pop-up tents, ladders, plywood and other items are used in its construction. The pop-up tent is put on the roof rack of the vehicle. It is recommended that you choose a pop-up tent because it already includes an entrance, a built-in net, and a convenient size for your needs. This project is designed for the low-budget do-it-yourselfer. The supplies required for a project can be obtained at a local home improvement store.

4. DIY Roof Top Tent

This is one of the quickest rooftop tents to erect, and it is also quite portable. It is constructed of 4×8 pieces of plywood for the foundation, 1×4 pine for the A-frame, 1×6 pine for the car mounting frame, and cloth. Pivot a U-frame on a bottom frame that is held together with 14 bolts. Fabric should be trimmed into bigger lengths and stapled together with a staple gun after being strung together with roof hoops and wire at intersections. Trim it to fit within the clamshell and side fold it in half.

Meanwhile, use silicone to fill up any gaps or crossings that may exist.

More information is available by clicking here.

5. DIY Roof Top Tent Camper

The materials for this rooftop tent include a compact truck lumber rack, scrap steel square tubing, and plywood sheets, among other things. The ability to construct this roof, as well as exceptional stitching abilities, are also required for the construction of the tent. Make a clean cut through the overhanging piece of the rack, and then lightly sand down the rusty surface. Remove part of the square tuning and cut it in a cross pattern to enable for the connection of the rooftop tent. Make two platforms for the lid out of the plywood sheets you have leftover.

Afterwards, lay the rack on top of the lid and fasten the rack in place with lag bolts to ensure that it is secure on the lid.

More information is available by clicking here.

6. Homemade Roof Top Tent

This do-it-yourself rooftop tent project is simple to construct and involves little investment in materials. It is constructed using 48 feet of plywood, hinges purchased from Home Depot, tent materials purchased from Fabrics Plus, and frame pipe purchased from Home Depot. Sewing is a very necessary skill to have if you want to construct this rooftop tent. Sewing textiles for the panels is a critical step in the process. Pipes and plywood may be cut and bent directly within the Home Depot store itself.

As soon as the panels are finished, position the frame and platform so that they are perpendicular to the desired length, and then secure the tent to the wooden platform with webbing.

Because plywood is not particularly comfy for sleeping, you may want to consider adding foam padding. More information is available by clicking here.

7. Roof Top Tent Build DIY

The following materials will be needed to construct this DIY rooftop tent for your car: a tongue and groove subfloor, plywood, gorilla glue, a jigsaw, and a variety of other tools. Make the base of the sunflower out of 34″ tonguegroove plywood, and the upper lip out of 14″ plywood. Face glue it and then apply extra 14% to it “to the inside of the upper lip With a jigsaw, cut out the joists for the frame of the structure. Create two pocket holes in the cross members, one on either side of the joists, using a pocket hole jig.

Due to the possibility that wood glue would not work successfully for this project, gorilla glue is advised.

8. Rooftop Car Camper DIY

The components required to construct this rooftop automobile camper are as follows: two fiberglass roof shells, two pop-up spring bars, two sliding hinges, and fourteen-inch plywood “Plywood is a type of wood that is used for structural purposes. A Reduce the height of one of the fiberglasses on all four sides by four inches “and screw two front hinges into the holes that have been created. Attach two black foldable uprights to the top and bottom holes of the original holes at a 90-degree angle.

Attach the reinforcing bar and drill four u-bolt holes through the bar and the bottom shell of the structure.

Attach the back plywood to the top shell.

More information is available by clicking here.

9. DIY Roof Top Tent

You’ve undoubtedly thought of attempting to build a camper on your own. This stunning DIY rooftop tent is constructed with crossbars, a pop-up tent, and 1 12 inch plywood “The use of wood, plywood, and piano hinges will be a lovely start. Remove the pop-up tent’s legs, and then frame the plywood with the 11-inch lumber “wood and securing it to the roof rack at the back of the vehicle Glue a pair of piano hinges to the side of the board so that it may be opened easily. As soon as the platform is in place, attach the remaining portion of the tent to the board by staining it to a hole in the board to prevent it from falling off.

10. DIY Low Profile Roof Top Tent

A mesh tent, a roof rack, plywood, and a ladder were used to construct this rooftop. The roof rack was constructed from metal rod and plywood, which was then framed with 1 12″ wood and the strut was affixed to the board. Installation: Place the board on the rack and fasten the mesh tent to the board using the screws provided. You are now ready to go camping if you just attach the ladder to the tent’s door opening. Construction of this DIY camper is really inexpensive, and it can be transported in any type of vehicle.

11. DIY Roof Rack Build For Roof Top Tent

Before you start building the roof rack for this tent, you should ask yourself two questions: first, what kind of air are you planning on using it for, and second, where are you going to put it. In addition, what would you put on it? Knowing the answers to both questions will assist you in determining the size of the rack you are creating for your application. After constructing the rack, a flat metal plate should be used to secure the rack to the vehicle at both the front and rear.

Install the plywood board and place the tent on top of it to complete the project. This project does not need the use of sewing abilities. It is quite simple and enjoyable to put together.

12. DIY Roof Top Tent

Have you ever fantasized of converting your automobile into a camper? This is a simple stage in the process of building a rooftop camper for your automobile. The first stage in constructing this is to construct a sleeping cabin in order to sketch out the real design you intend to use. Afterwards, transfer the design on the coroplast sheeting. The coroplast should be cut and creased where you wish to fold it. Build the doors and windows as you see fit. Using a box cutter or a razor blade, cut the three edges of the holes, but leave the top edges alone.

Make the struts for the window as well as the platform’s support structure.

Coroplast, super glue, grommets, velcro, and plywood were used to construct this rooftop structure.


Has this guide been of assistance to you? If you answered yes, please share your thoughts with us! You might know of a friend or family member who would be interested in learning how to build a DIY rooftop tent for you. We would much appreciate it if you could share this post on your social media accounts. If you have any questions or suggestions about this article, please feel free to post them in the comment box at the bottom. Thank you for taking the time to visit!

We Designed the Best Rooftop Tent Ever. Sort Of.

When you join up for Outside+ today, you’ll receive a $50 discount off an eligible $100 purchase at the Outside Shop, where you’ll discover a variety of brand-name goods handpicked by our gear editors. The rooftop-tent fantasy is having fast access to cabin-like comfort that you can transport wherever on top of your off-road vehicle. They keep you safe from nosy creatures and provide you with spectacular views because they are perched high in the trees. They’ll also make all of your Instagram followers incredibly jealous, which is always a good thing!

  • Amid our survey of rooftop tent users, we discovered that many were dissatisfied with how noisy and unpleasant they were to sleep in during strong winds.
  • This is the rooftop tent of your dreams: a luxurious shelter that is portable and easy to transport to the far reaches of the world.
  • That can be fairly tough to execute off-road, in the middle of nowhere, where you wish to go camping, and it will almost certainly require stacking various wooden board off-cuts as shims in order to accomplish.
  • Most of you will undoubtedly consider those 150-plus pounds to be only fairly heavy, but you must also consider the complete load that carrying that weight that far up, outside your vehicle, imposes on your body.
  • However, your vehicle is intended to bear weight on the inside of its cabin rather than outside of it, and to do so as high as possible and as far away from the optimum center of gravity as feasible.
  • Many stock vehicles’ suspensions are overworked as a result of 150 pounds of weight on the roof.
  • But, perhaps most crucially, our revolutionary rooftop tent design significantly improves the Disco’s pose-ability.

(From Wes Siler) Surely, there must be a method to greatly reduce the weight of a rooftop tent while yet making it safe and practical to transport.

But, before we get into the specifics, let’s have a look at what people find so appealing about rooftop tents: Setup is quick and simple: The majority of rooftop tents require just that they be opened in order to be used.

For those who are driving in inclement weather or at the end of a long day, it takes less than 10 minutes to get out of the car, set up the tent, and crawl inside.

This may either make your life more structured and accessible, or it can simply allow you to carry more garbage about with you.

tent’s Anyone up for some rooftop tent sex?

Looks that are perfect for Instagram: Nothing says “I’m an L33T Overlander” quite like a rooftop tent, and it’s hard to argue with that.

I believe we accomplished all of this with our arrangement, and we did it for a total weight of only 48 pounds (including the bed) and a total cost of (only!) $1,200.

We found the waterproof and sturdy Touratech Expedition dry bag to be the perfect container for our rooftop tent.

Touratech’s new Expedition Bag (which costs $250) was our choice.

With a waterproof T-Zip similar to that of a dry suit as its closure, it is equipped with tough but minimalist tie down points, handles, and backpack straps to keep it secure when on the move.

This is the most comfy mattress we’ve ever slept on, bar none.

(Exped) Mattresses that are comfortable: We’ve included the Exped MegaMat Duo ($279), which is our favorite two-person sleeping pad of all time.

It is constructed of memory foam and a pressurized air chamber.

We removed our quilt from the otherwise disposable REI Kingdom Queen sleep set, but you could get a comparable level of comfort with a queen-size Rumpl Puffy blanket (which costs $199).

It may be used as a tent floor, as a bed for Wiley, or as additional insulation on chilly nights to keep him warm.

We can’t think of a better vehicle camping tent than this one, which is simple to put up and has excellent ventilation.

Even though it weighs only 18 pounds and folds up to the size of a big briefcase, it opens up to expose a spacious interior with six and a half feet of standing area across the whole unit.

But hold on a minute!

No, not at all.

I estimate that the first time you use it, it will take you 20 minutes to figure out how to utilize the massive pole system.

And that’s normally done with one hand, with the other being used to transfer a beer can between my tailgate and my face, among other things.

The key trick here is that we don’t have any of it.

I understand that this may appear to be a radical statement, but bear with me.

The vehicle was parked at an angle with natural rocks because of our unconventional tent-on-the-ground arrangement, which provided a very efficient wind break.

Exit/entrance convenience: When I wake up in the middle of the night to go pee, I only have to unzip the door and wobble outside.

My kid, Wiley, can easily sleep inside the tent with us because of the lack of a ladder with this configuration as well.

The Touratech bag can be easily leveled: If I am unable to park my vehicle on a perfectly level plot of ground, I can just sling the Touratech bag on my back and walk a few yards until I find a level patch of ground.

Vehicle dynamics that have been compromised: My Discovery already had a somewhat high center of gravity when it was standard, but it has now been raised three inches higher with the installation of a three-inch-taller suspension and significantly larger 33-inch tires.

It is inert enough that its impact on the car is hardly noticeable.

That implies that neither the fuel efficiency of my car, nor the driving dynamics of my vehicle, should be affected by the superfluous installation of a rooftop tent in my vehicle’s day-to-day transportation.

Probably the majority of you already have a large automobile camping tent, a comfy mattress, or a great quilt for when you go camping.

The equipment listed here is simply the best available for the job, regardless of price.

As with any radical new concept, our rooftop tent on the ground is met with skepticism as well as teething troubles in the early stages.

Because of this, I’ve come up with the hypothesis that the terrible animal pandemic exists only in people’s thoughts, which I understand will be contentious.

With the unprecedented simplicity with which our rooftop tent on the ground can be entered and exited, that dog will even be able to defend you when you are inside the tent.

It’s also not one that I’m really familiar with.

If you are unable to tent, why not simply get a room at a nearby motel?

Using the money you save by using our revolutionary rooftop tent on the ground method, you may pay for one.

See also:  How Many Plants In A 3X3 Grow Tent

We stayed on the beach in Baja for two absolutely wonderful days and had a wonderful time.

I’ll leave it up to you to decide.

Do you agree? Be forthright. You may be better served by visiting more and more fascinating locations rather than by acquiring superfluous lifestyle accoutrements if you are having difficulty organizing your life experiences through your phone.

(2022) DIY Roof Top Tent: How to Make the Perfect Getaway Shelter

Being able to sleep on top of your car in the middle of nature is a fantastic experience, but finding a nice rooftop tent may be difficult. Most of the rooftop tents available for purchase in stores are pricey, and they almost always contain something that you don’t like. As a result, constructing a DIY roof top tent is the most practical solution. A handcrafted rooftop tent will provide you with the level of comfort you desire. On top of that, it will be less expensive, and you will be able to customize it depending on your requirements and the possibilities available in your automobile.

After having the opportunity to experiment with a variety of different rooftop tents throughout the years, we feel that making your own tent may always be a viable alternative.

Follow up and find out what is required to construct a fantastic rooftop tent.

Know the Basics

An inexpensive roof top tent may be purchased in stores for anywhere between $2500 and $5000, or you can spend a few months or your summer break building one from the ground up for no more than a few hundred dollars. It’s possible that it’s even less. All you need is a little goodwill and a few tools, so if you’ve got those, we’re ready to get started right now.

Make a Plan

Before you start hunting for materials and putting together your structure, you should sketch up a rough blueprint of what you want to create. Simply drawing a sketch on paper with measurements and location information would enough. Make a list of the materials you’ll require, as well as how much of each you’ll require. Keep in consideration the sort of car you drive as well as the amount of space available on the top. In order to do your math homework successfully, you’ll need to determine the space, the height, the weight, and the amount of material that you’ll require.

Choose the Wood

The first step in constructing a handmade rooftop tent is selecting and procuring a nice piece of wood that will be used as the tent’s floor. Make a decision based on your experience and desire rather than on the best option or the wood that you must use. If you like a certain type over another, go ahead and use it; just make sure it isn’t too thick and difficult to work over. You’ll want the material you’re going to use to be flexible and easy to cut, so be sure it meets those requirements. Additionally, it is preferable to select wood material that is lightweight enough so that it does not add undue weight to the automobile and makes it easier for you to attach and detach the item as necessary.

It’s simple, soft, and not too easy to break, which is a plus. Cut it to the exact size that you want, and it will be simple to incorporate little details such as screws – but you won’t have to worry about them falling off, breaking, or failing to hold together.

Find a Tent

Let’s be honest: no matter how much you want to claim that you created everything from the ground up, that is almost never the case in reality. The tent is the clearest example of this since it is completely insane to begin stitching your own tent from the ground up from scratch. In order to select the most appropriate tent for your needs, it is important to visit the stores and inquire about them. You may either get a new and shining tent for a greater price, or you can acquire some old and used tents at flea markets or on the internet for a lower cost.

  • Whatever option you choose, you must be certain that the tent you choose will meet your requirements before purchasing it.
  • Then seek for a tent with the size that are most appropriate for your needs.
  • It all depends on your personal preferences.
  • However, if saving money while still looking and feeling nice is more essential to you, choose the less expensive alternative.
  • If you don’t want to waste your time on this, a little duct tape may work wonders for your rooftop tent’s structure.

Buy the Metal Materials

Before you start working on a building project, make sure everything is in order. For a nice rooftop tent, you’ll need a sturdy structure, which means you’ll need to purchase metal holders, hangers, clips, racks, screws, conduits, and other related items. It is inevitable that another trip to the store will be necessary. Check to see if you already have a strategy in place before you head to the supermarket! Never purchase supplies until you know exactly what you’re looking for and how much of it you’ll need.

Typically, a suitable frame is constructed of at least four metal conduits, which you will join to the plywood with screws or nails.

Don’t forget about the metal racks you’ll need to fix the car’s carrier structure, and double-check that everything is in working order with the car’s overall design.

Make a Bed

For sleeping on the rooftop tent, you may make use of a variety of materials. The most comfortable choice is a mattress – similar to the one you use in your bedroom for your regular bed at home. This solution, on the other hand, may not always be the greatest match for your requirements if the rooftop tent is not sufficiently large. Additionally, if the mattress is excessively thick, it may create a difficulty when opening and shutting the structure. Due to the fact that we’re talking about a rooftop tent, a structure that you’ll most likely use for camping in the great outdoors, you could consider a more straightforward alternative.

You may make a nice handmade mattress by combining a few foam pads together in one place.

Then you may either purchase or manufacture a covering for them. This may be purchased from specialized outdoor equipment stores, or you can improvise using things you already have on hand. Make it as thick as you need it to be and as you want it.

Don’t Forget The Stairs

There are a plethora of various possibilities and ideas on how to construct your own rooftop tent if you look around on the internet. All of them, however, will require the use of steps due to the fact that the tent will be set up on top of your car’s roof. The sort of tent you use will determine the type of stairwell you’ll require. It is not necessary to construct special stairs if your tent is totally supported by the roof; a regular 5 foot stepper would do in this case. Nevertheless, if you intend to have your tent stretch out of the roof, you’ll require steps, which will also aid in the tent’s stability and security by making the tent more safe.

When looking for a write one, the most crucial thing to remember is to know the precise measurements you require.

How to Build From Scratch

The first and most crucial thing you should understand about this stage is that there is no such thing as right or wrong. It’s true that you’ll need to adhere to some fundamentally logical architectural principles, but each rooftop tent is unique in its design. You should be able to utilize your imagination and experiment based on your wants and feelings, as long as you do not harm others. If you have a concept that you like, feel free to put it into action. If it works, wonderful; if it doesn’t, go back to the beginning and try another alternative that has been demonstrated to be effective.

Start Cutting

If you decide to choose plywood, you will find it to be a very straightforward material to deal with. Begin cutting and working on the board once you’ve developed a strategy and created a list of the necessary measurements. Remove half of the board from the tent; this will assist you in folding the entire tent and making it more compact for travel later on. You’ll need to work on the edges to ensure that they’re exactly aligned with the metal structure you’ll be building later. When you’re finished, do a little work on the surface of the piece.

Build The Frame

Although the frame is the most complicated aspect of the entire building, once you get started you’ll discover it’s not quite as difficult as you anticipated. The frame may also be built of wood, but we prefer the look of metal. If it is well-connected, it becomes stronger and more flexible. Place two hinges on either side of the centre of the board, one on each side of the middle of the board. It is recommended that your floor be able to open and shut, as this will save you a lot of room when transporting it and will provide you with a great deal of comfort when using it.

  • At this point, you may embark on a more serious craft project and design tent holders that are both modern and pricey, and that will do an excellent job in the outdoors.
  • It is entirely up to you which option you will select.
  • Place at least two and a maximum of five conduits that will run the entire length of the board from one side to the other and will keep the tent elevated enough so that you have enough space to sleep inside the tent.
  • Screw the ends together so that when you shut both boards together, the bars will link and enter the closed structure.

Adding more than three conduits will necessitate the addition of several more hinges. Your tent will be stronger and more secure as a result of this, but it will be more difficult to put up. Of course, if you come up with a superior option, you should just go with it.

Get Things Connected

When you have the sleeping board ready and the frame all tightened up, you will need to link all of the pieces together. The conduits and hinges must be fastened to the board using wood screws. You must be very cautious to screw in precisely the same way on both sides of the board because if you make a mistake and one of the sides is just an inch different from the other, the two sections will not close properly and the entire creation will be rendered worthless. It’s time to put the tent to the test now that you’ve joined the two pieces.

Alternatively, you could use staplers that are simple to remove or duct tape, but perhaps the best solution is to use a firmer fix on one side and make it flexible on the other – this way, you’ll be able to gather it entirely on one side while making it easy to carry.

Attach it to the Car

After that, you’ll be almost completely set to travel. Transport the entire construction to your car and secure it to the roof racks on the side of your vehicle. If you don’t already have the racks ready, you’ll have to put in some more effort with this. You may either purchase a typical metal structure from a vehicle store or create one yourself to utilize for storing excess baggage. It’s not difficult – simply take the racks and attach them to the automobile using a few screws in the locations you believe are the most appropriate.

Of course, this implies that you have previously designed and attached the necessary components of the building project in the past.

Try the Stairs on The Spot

Assuming that everything appears to be in working condition, you will need to install the steps and make your way to the tent. It is preferable to construct a clip-on device, with which the stairwell will retain the second section of the board. You’ll have a simple method to reach the top of your tiny caste and you’ll also get the full support of the entire tent if you do it this way. In order for the tent to be level, the most crucial aspect of the steps linking the tent is to know the precise height you need to build them.

It can be useful for when you are moving around in the tent since abrupt movements may cause the steps to shift left or right and their location to alter.

Things We Didn’t Mention

In order to limit the length of this article to a bare minimum, we didn’t address many details concerning the process of constructing your rooftop tent during our discussion. Things like “how to screw with a screwdriver” are not covered in detail since we presume you are already familiar with the procedure. Even the smallest details, such as connecting the stairwell to the structure, are overlooked.

We presume that these things are very straightforward, and that if you’ve embarked on a project such as making a DIY rooftop tent, you’ve already learned a thing or two about screw driving. All of the things we didn’t speak about, but you feel are necessary, you should simply go ahead and do.

Sleep under the Stars

Building a handmade rooftop tent is never an easy task, but the satisfaction you get when you are finished is priceless. While doing so, you may grow dissatisfied with some aspects of the process and find yourself unable to connect the dots in the manner in which they are supposed to be connected. It is only natural; after all, no one makes rooftop tents by themselves every day, and the first attempt is always the most difficult. The most crucial thing you should concentrate on before beginning your construction adventure is your own personal experience and inventiveness.

When confronted with an issue that appears insurmountable, use your imagination and ingenuity to find a solution.

It’s after all your creation, and things we make for our own delight aren’t required to adhere to any particular laws or guidelines.

Consider whether you believe we’ve overlooked anything.


Dennis Owens is a graduate of the National Camping School as well as the REI Outdoor School, among other institutions. He understands all there is to know about what equipment to bring, how to arrange your journey in order to be safe, and what to do if you become lost in the mountains. Because he is a walking encyclopedia when it comes to the wilderness, we are fortunate to have Dennis accompany us on our expeditions.

Leave a Comment

Your email address will not be published. Required fields are marked *