Create A Bell Tent Platform Deck
Even while a Life inTents bell tent is beautiful on its own, installing the tent on a hardwood platform makes it sparkle like no other tent in the world. However, it is not only about the beauty, but also about the functionality of the item. Building a base for your bell tent is the best way to ensure that your investment remains in excellent shape for many years to come. Using a waterproof bell tent, you may camp for a number of weeks without having to worry about it requiring any upkeep. However, if you want to leave your bell tent up for several weeks or months, you will want to take steps to ensure that it is properly protected from both standing and rushing water.
A tent platform elevates your tent off of wet ground, speeding up the drying process of the canvas and limiting the formation of mold in areas where the sun has difficulty reaching the tent’s canvas.
It is true that this insurance comes at an additional expense, but it is well worth the extra time and effort to get.
Selecting a Tent Platform Design
Platforms are available in a variety of shapes and sizes, with no one design being significantly more useful than the others. The most common designs for a 16-foot (5-meter) wood bell tent platform are squares (20’x20′), rectangles (20’x30′), hexagons (11-gons), and orhendegons (11-gons), all of which may be used with or without decks. The design selection that is best for you will be decided by your intended function, shape, and financial constraints. Materials, labor, and design are the three primary factors that influence the cost of a platform.
- The cost of materials increases according to the size of the platform
- Hiring a carpenter is unquestionably more expensive than attempting the project on your own
- In general, the more unconventional your design, the longer it will take to construct (see bullet2)
Depending on how level your site is, you may also need to add footings to your platform, which may necessitate the construction of an additional stairway leading up to the front door.photo credit: @amlwarnerphoto credit: @boulders hideawayphoto credit: @Dalefarmphotosphoto credit: @paintrockfarmphoto credit: @amlwarner
Tent Deck Material Considerations
Your platform will be subjected to harsh weather conditions, which can vary depending on where you are located. The effects of the sun, rain, snow, and humidity on your platform can all deteriorate its condition over time. Used treated timber and fasteners that are constructed to endure changing weather conditions are suggested for use in this project. In terms of wood for bell tent decks, cedar and redwood are two of the best options, followed by pressure treated wood, which is a more cost-effective alternative.
Materials might cost anywhere from $2,000 to $5,000, depending on the size of your platform, the quality of the wood, and the location of your platform. The cost of labor will also vary based on a variety of circumstances, but it is likely to be between $1,500 and $3,000 per hour.
Securing Your Tent Properly
The procedure of erecting your tent on the platform is largely the same as the process of erecting it directly on the ground. You will, however, need to plan ahead of time how you will attach the guy lines and the floor of the tent to the platform itself in a smart manner. The following steps are used to secure the floor: Once you’ve set up your tent on the platform, the following step is to tie the floor to the deck at each of the four corners, making sure that the floor is taut and free of wrinkles in the process.
- A washer should be used to secure the D-ring of each corner of the groundsheet so that it does not slip over the screw or bolt.
- Another alternative is to use a heavy-duty screw hook as a temporary solution.
- Individuals have just extended their guy lines from the tent and secured them right into the ground just a few feet away from where the platform is.
- In order to ensure that the bell tent is set up on stable ground, the guy lines are intended to be stretched at a particular specific angle from the roof seams.
- We recommend attaching the guy lines to the posts that have been installed to the deck.
- Using this method, you will be able to extend the guy lines at their proper angle while also eliminating any possible tripping hazards.
You could either construct a taller post to support the guy line tied to the door, or you could add a second guy line above the door and tie each end to the posts directly to the left and right of the entrance, as shown in the illustration.
Bell Tent Platform Design Plans by Life inTents
We’ve created some really elaborate bell tent layouts that you might want to consider installing on your deck if you have the space. Our bell tent deck designs are exactly designed to fit the design of a 5-meter (16-foot) bell tent and include a deck off the front entrance for an awning, steps, and sturdy footings to provide a safe and secure structure. We’re glad to provide them for free with the purchase of a canvas tent from Life inTents. 5M people have life intentions. Rendering of the bell tent platform design
Alternatives to a Glamping Tent Platform
If you don’t have the resources to physically construct a platform, or if you only want a temporary protective ground barrier, you might construct a raised and flat rock bed on which to pitch your bell tent instead. We recommend that you use finely crushed rock such as decomposed granite or 14 minus gravel for this project. It should be enclosed with edging that is approximately 2 feet away from the tent’s exterior walls. Place about 1.5″-2″ of the material on top of the previous layer, packing the rock down between every 0.5″ layer.
Please feel free to share your thoughts and suggestions with us!
Start A Mobile Glamping Business in 2022
Glamping event providers and backyard glamping enterprises began to spring up in the Wes boroughs in the year 2015. Mobile glamping enterprises are in high demand right now, surpassing their supply, making this a fantastic small business opportunity in your local community. We want to assist you in determining whether or not it is the right moment for you to start your own glamping rental business. THE LIT LIST will be published on January 9, 2022. 6 minutes to read
How to Maintain and Clean a Bell Tent
Canvas tents are extremely durable and may last a lifetime if they are properly maintained. Canvas tents, like keeping a healthy body, may last a lifetime if they are properly cared for and maintained. Here are some ideas to help you clean and care for your bell tent so that you may get the most usage out of it for a long period of time.
How to Build A Wall Tent Platform
Construction of a wooden or concrete platform to act as a base will provide the most enjoyable canvas wall tent experience possible. Although we’ll be using a 12′ x 16′ platform as an example in this post, the measurements are easily adjusted for whatever wall tent size you want. You can also discover designs for our most popular wall tent sizes farther down on this page. Watch this short movie to get an insight of the platform-building process in action.
What you’ll need
Before you begin building, gather the following materials, which can be acquired at any local hardware shop with relative ease.
- (1) Post top connection (Yardistry YP21012)
- (18) Joist hanger for single 2′′ x 6′′
- (1-2 boxes) exterior wood screws or nails
- (1) post top connector (Yardistry YP21012)
- Flat surface
- (9) 4′′ x 4′′ posts, trimmed to length
- (1 bag) gravel fill
- (1-2 bags) concrete, for a more stable foundation
- (1-2 bags) concrete
- (9) Concrete deck blocks (for use only on a slanted surface)
- (2) 2′′ x 6′′ 16′ beams
- (3) 2′′ x 6′′ 12′ beams
- (18) 2′′ x 6′′ 8′ joists
- (2) 2′′ x 6′′ 16′ joists
- A total of 36 deck or composite floor boards measuring 5/4″ x 6″ x 12′
Setting the posts
- Locate a level surface and outline a 12-by-16-foot space for the platform. In order to accommodate beams, posts must be placed 1 1/2″ from the outer corners. Locate the Middle Posts in accordance with the dimensions provided below. It is recommended that the center post be 5 1/2″ shorter than the rest of the columns in order to allow the center beam, which will rest on the post top connector. Once the location of the posts has been determined, dig a hole at least 6″ deep. Place the post in the ground and cover with gravel to improve drainage.
Attaching the perimeter
- Reduce the length of two shorter beams to 11’9″
- Reduce the length of two longer beams to 16′
- Reduce the length of one short middle beam to 11’2″ Exterior beams should be screwed directly into the post using galvanized wood screws. Check to see if they are level. For a short beam, place (2) joist hangers within the middle columns. (Optional) A Post Top Connector measuring 4″ by 4″ should be placed in the center of the central column. Install a small beam on the center column between the two middle columns to provide additional support.
Adding the joists
- Find the middle of the short center beam and use it to determine the joist spacing. Once the center has been determined, make a mark at 16″ on center for the remainder of the joists. Install joist hangers on both sides of the short central beam, where the joists will be suspended
- And Install the joists in the joist hanger and secure them with wood screws. Screw straight from the beam to the joists on the outside of the structure.
Placing the floor boards
- It is possible to utilize pressure treated wood deck board or composite deck board for this project. Deck planks should be cut to 12′ in length. Lay out the boards to check that they all fit on the platform without the need to rip the boards — If all boards are consistent 5 1/2″ in width, all boards should fit on a 12′ x 16′ platform without gaps between the boards. The floor planks should be fastened to the joists using screws.
Application of platform deck boards in 1216
adding an Outrigger
Once your platform is complete, you may add an outrigger to make your canvas wall tent experience even more enjoyable and memorable.
Still looking for the perfect wall tent?
Get started by looking through our most popular canvas wall tent designs. After all, adventure is only around the corner.
Deck DesignsIvy Fife2021-12-20T11:59:47-07:00
You may set up your tent on a platform that fits the footprint of the tent, or you can extend the deck to create a front porch, which will provide you with some really usable outdoor living area. Building the platform can be done by you or by a third-party contractor. You have the choice to choose. But don’t forget to put your unique stamp on it! We supply some basic drawings for your platform tent, as well as the necessary measurements. You have the option of customizing your platform and ridge pole to suit your needs and tastes.
- Quality and craftsmanship are the fundamentals. What is Involved in a Yurt Construction Project
- Request a Brochure
- Request Fabric Samples
- Return to the Home Page
- The following options are available: Yurt Covers
- ColorFabric Selector
- Domes/ Skylights
- WindSnow Insulation
- The Back.
- Interior Design Ideas
- Floor Plan Examples
- Deck Designs
- Back to top of the page
- Pitch a Yurt, Engineering, Building Energy Codes, Technical Support, and more are all available here.
- Quality and craftsmanship are the fundamentals. Exactly what goes into a Tipi project is unknown. Request a Brochure
- Return to the Home Page
- TIPI COVERINGS
- INTERIOR CLOTH COMPONENTS (LINERS, OZANSFLOR COVERS)
- POLES + ACCESSORIES
- PAINTED TIPIS
- DECK DESIGNS
- PHOTO GALLERY
- Tipi Pricing
- Tipi Pitching
- Visiting a Tipi
- Tipi FAQs
- Back to top of page
- Instructions for Pitching
- Care and Cleaning
- Technical Support
- Return to top of page
- Quality and craftsmanship are the fundamentals. What is Involved in a Tent Construction Project
- Requesting a Brochure
- Returning to the Home Page
- Tents and tarpaulins
- Tents for rent
- Plans for a deck
- Prices for tents
- Pitching tents
- Visiting a tent
- Tent Frequently Asked Questions
- Instructions for Pitching
- Care and Cleaning
- Technical Support
- Return to top of page
- Pricing for Yurts
- Pricing for Tipis
- Pricing for Tents
- LOGO WEAR
- Pricing for Yurts
- Pricing for Tipis
- Pricing for Tents
- LOGO WEAR
- Pricing for Yurts
- PHONE 970-240-2111
- KEEP UP TO DATE Sign up for our email list to receive the newest news
- GET IN TOUCH
- GET SOCIAL
- GET BACK TO
How to Build a Deck, Step-by-Step
Outdoor living spaces such as decks provide an excellent opportunity to relax and enjoy the great outdoors without having to leave the comfort of your own home. You may barbeque on them, relax around a campfire with friends, or even set up a canvas tent from Davis by using the deck as a platform. Whatever ideas you have in mind for your future deck, you may not have considered the possibility of building it on your own, but I’m here to tell you that it is very doable, and it can save you money in the process.
It consists of a straightforward series of procedures; of course, you’ll want to conduct a little more study before really getting started with the construction, but this brief overview should give you a general notion of what to expect.
Planning and Layout
You’ll want to start with a deck construction plan, which is obviously the first thing you’ll want to do. Based on the particular structure of your home and the terrain on which the deck will be constructed, you might either look at current deck plans or design your own from the ground up. Of course, you’ll want to think about the design of the deck itself, as well as what it will be used for and what materials you’ll want to use to construct it. This will entail consulting with your local building department, homeowners association, or state authorities to ensure that everything you want to do is “up to code,” as the saying goes.
When it comes to materials, you’ll want to predominantly utilize pressure-treated timber or one of the several composite materials created specifically for outdoor building projects.
You may get additional information about deck building preparation by going to this website.
Structure and Framing
Your deck’s footing will be provided by posts, and those posts will require post-holes to be dug. You can learn all you need to know about drilling post holes for decks right here. It entails excavating the holes and putting them in concrete to secure them. Then, using brackets, you’ll secure the posts to the concrete footing, making sure they’re level and plumb (straight up).
Following that, you’ll connect extra brackets to the beams that span between the posts. In order to maintain structural integrity, you’ll also need to waterproof the tops of the beams and install diagonal bracing between them.
Apply Decking and Railing
“Decking” refers to what you would perceive to be the primary floor of the deck, consisting of the flat horizontal planks on which you stand and stroll while enjoying the outdoors. According to what you may assume, you’ll be putting them over the beams that you’ve just placed and fastening them together using decking screws. In addition, unless you previously had the boards cut to the precise dimensions of your design by a professional, you will most likely need to perform some cutting and jigsawing to get them to suit your design.
Following the installation of the railing posts, it will be necessary to finish off the railing by adding the smaller boards that will serve as the balusters and rail tops.
Many composite decking planks, for example, include notches and grooves that allow them to lock together.
Stairs and Stair Railing
It takes a little more effort and math to build stairs, which makes them one of the more difficult aspects of the deck construction process. It is typical practice to construct the stairway framework out of treated timber and then cover the stair surfaces with composite boards. Installing a landing for the steps (where the bottom of the stars would rest) is usually the first thing you’ll need to accomplish, and this is often a concrete pad or even footers similar to the ones you used beneath the deck itself.
A treated wood or composite surface can be used for stair treads, and a railing system will require posts and then smaller boards for the balusters and rail tops.
Once you’ve completed the fundamentals, there’s virtually no limit to the number of ways you may customize or add a little flair to your deck design. Add built-in lighting at strategic locations, attached or detached deck seating, a fire-pit or outdoor fireplace, a pergola, skirting to cover the space beneath your deck, and of course a walled luxury deck tent from Davis to enjoy your outdoor space no matter what the weather is like.
Build a Portable Platform
Editor for Outdoor Life Online Tent camping has long been a popular option for people to take in the natural beauties of the world’s most beautiful places. The novelty of sleeping on the ground, even with an air mattress, wears off quickly while traveling for a lengthy period of time. If you’re an outdoorsman who goes camping for weeks or even months at a time, you might want to consider building a tent platform for yourself. An exterior-grade plywood deck covering a 2×4 frame makes up the base of this tent platform, which was created for the Outdoor Life line of products.
It can even fold down to fit in the back of most pickup trucks.
The additional 4 feet in front of the tent forms a little “front porch,” which makes it possible to exit the tent without having to walk on the ground.
A full construction design for the platform is available on the internet. The cost of lumber and hardware will range between $450 and $500. What You’ll Require
- Six 4-by-8-foot sheets of ACX 12-inch plywood
- Ten 12-foot 2x4s (for joists)
- Four 8-foot 2x4s (for sides)
- Four 8-foot 2x4s (for legs)
- Six 4-by-8-foot sheets of ACX 12-inch plywood 12 Stanley LifeSpan strap hinges (No. 78-1515)
- 9 Stanley 3-in. utility hinges (No. 75-2060)
- 4 Stanley 3-in. butt hinges with removable pins (No. 08-3031)
- 10 3/8-in. Stanley eye bolts (No. 13-0290)
- 10 5/16-in. Stanley square U-bolts (No. 13-4250)
- 12 Stanley LifeSpan strap hinges with removable pins (No. 78-1515)
- 12 Stanley LifeSpan strap hinges There are ten 3/8-7/16-inch tee nuts, twenty 5/16-inch wing nuts, twenty 1-14-20x20mm insert nuts, twenty 1-inch washers, and twenty 1-14-20×1-inch flathead machine screws in this set of parts.
Twelve 12-foot-long 2x4s (for joists); four 8-foot-2x4s (for sides); four 8-foot-2x4s (for legs); and six 4-by-8-foot sheets of ACX 12-inch plywood. Materials: six 4-by-8-foot sheets of ACX 12-inch plywood. 12 Stanley LifeSpan strap hinges (No. 78-1515); 9 Stanley 3-in. utility hinges (No. 75-2060); 4 Stanley 3-in. butt hinges with removable pins (No. 08-3031); 10 3/8-in. Stanley eye bolts (No. 13-0290); 10 5/16-in. Stanley square U-bolts (No. 13-4250); 12 Stanley LifeSpan strap hinges with removable pins (No.
butt There are ten 3/8-7/16-inch tee nuts, twenty 5/16-inch wing nuts, twenty 1-14-20x20mm insert nuts, twenty 1-inch washers, and twenty 1-14-20×1-inch flathead machine screws in this set of materials.
How to Build Your Own Portable Tent Platform
It may seem strange, but a significant part of tent camping and living in the outdoors is about being able to comfortably separate your body from the elements of nature while yet being immersed in them. Consider the implications of this. Make sure you have the appropriate apparel to keep you warm and dry in the rain and cold. You prepare a tent to provide shelter for the night. You’ve even laid down ground tarps and sleeping mats to better insulate and shield yourself from the elements. Because we humans are rather fragile when compared to all that nature may hurl at us, it only makes sense to construct and maintain certain barriers to keep us safe from harm.
There are times when the ground is perfectly pebbled with sharp pebbles wherever you look, and other times when the entire landscape is nothing but marsh.
For some campers, this is simply a fact of life that must be endured; for others, a movable tent platform may be utilized to their advantage.
Why build a portable tent platform
It may seem strange, but a significant part of tent camping and living outdoors is about being able to comfortably separate your body from the elements of nature while yet being immersed in them. Put it this way: If you plan on being outside in the rain or cold, be sure you dress appropriately. Your nighttime protection is provided by a tent. Ground tarps and sleeping mats have even been laid down to further insulate and shield you from the elements. Due to the fact that we humans are rather fragile when compared to the forces of nature, it only makes sense to construct and maintain certain barriers to keep us safe.
There are moments when the ground is wonderfully pebbled with sharp pebbles wherever you look, and other times when the whole region is nothing but marsh.
The use of a moveable tent platform can alleviate this problem for some campers, while others will have to deal with it as is. When you’re attempting to camp in rough or damp terrain, ground tarps and sleeping mats can only get you so far.
How to build a portable tent platform
There are a number various ways to construct a portable tent platform, and each one is dependent on your definition of portable as well as your understanding of what constitutes a decent platform. It has been recommended on certain online forums that all you need is two foldable tables put up side by side and you’ll have all you need. This is not true. Of course, you are allowed to experiment with this, but it is not suggested. In this section, we will discuss two approaches to developing a platform that is more resilient and helpful.
Building a removable tent platform for a trailer
One of the most effective methods of constructing a portable tent platform is to place it on top of a trailer. There are several changes and building options available to you as a result of the readily transportable and robust basis on which you may build your structure. This example will show you how to build a temporary tent platform on top of a 4′ by 6′ trailer, which will be described in more detail later. The finished product is large enough to accommodate a conventional 7 × 7 tent and is constructed in such a way that storage space can be found beneath the platform.
- When going on a road trip or vehicle camping, all you have to do is pull over, set up your tent, and you’re ready to go.
- So, in order to construct this platform, you will first require a few components.
- It may be any size you choose; all you have to do is make the necessary modifications to your own build.
- For a trailer that is 6 feet long, you will need at least 51 feet of lumber.
- That’s all there is to it for the wood you’ll need.
- You’ll need a package of wood screws to help you put everything together when you’ve finished.
- After all of this, the only thing left to figure out is what you’re going to use for the outside supports, which we’ll cover in a bit more detail later.
- You will, however, require some basic equipment to make the process simpler.
Construction of the removable tent platform for a trailer
As soon as you have all of your materials available, it will be time to begin construction. The first item that has to be constructed is the platform’s foundation. The trailer’s base is constructed of three 2×4 supports that run the length of the trailer. One on either side of the room and one along the center. These supports will be used to attach the entire platform to the ground. A 6′ long trailer will require nine 2×4 pieces along the length of the trailer’s interior, with each section measuring 6′ in length.
- After that, you’ll need to cut fifteen support struts from the 2x4s you’ve gathered.
- To ensure a level trailer, the top piece of 2×4 should be level with the top edge of the trailer’s sides.
- As soon as you have screwed all of these 2×4 pieces together and placed them in their proper locations, you are ready to proceed.
- In order to create an inner platform, you will need to join two of the 48 boards together.
- You will still be able to lift the boards to gain access to the storage area beneath them.
- The remaining hinges will be used to join each part to the inner platform once it has been assembled.
- In order for these outboards to be able to fold inward, the hinges should be strategically placed.
- Due to the fact that these outside boards will be a little unsteady, you will need to construct legs for them.
- Some people have been inventive with similar ideas, and they have utilized chair legs, table legs, and even old walkers as structural support for their creations.
Whatever you choose to utilize, you’ll need something to assist support the outside platform, regardless of what you choose. You are now finished with your trailer tent platform for your portable tent platform!
A simpler construction
For those of you who find the trailer platform construction too time-consuming or who prefer not to have something constructed on top of a trailer, this next project is for you. It doesn’t get much more straightforward than this. Once again, this design is intended for a traditional-sized two-person tent, but you may modify it to meet your specific requirements by adding more space. You may potentially construct multiples of these platforms and arrange them next to each other on a flat surface.
- Two 48-inch sheets should be plenty.
- Aside from that, you will just require basic woodworking equipment such as a drill and a circular saw.
- Caution should be exercised when connecting the boards.
- Attach the hinges equally spaced around the centre of the sheets so that the sheets fold inward when the sheets are folded.
- When it is fully unfurled, the 2×4 base should provide sufficient support for your requirements.
- If you so like, you may also make a few modifications to this design.
- Additional 2x4s or even strong PVC pipe will suffice in this situation.
- This is a great opportunity to be creative, but just adding some hinged pieces of plywood with folding legs would suffice.
Modifications for your tent platform
Once you have invested the necessary effort to construct a DIY portable tentplatform, you can begin to enjoy it to its full potential. If you look around the platform, you’ll see that there are several small things you can make to improve its functionality and convenience of use. Here, we’ll go through some of the small details that, while simple to execute, can have a significant impact on overall operation. As you continue to work with the platform, you will undoubtedly come up with new ideas, which you should consider putting into action.
- Short imitation grass can be purchased at places like Home Depot, and it is simple to install.
- If you prefer wood, you may put higher-quality boards over the plywood sheets and even place a weatherproofing layer on top of that.
- The installation of stairs or even a tiny ladder is another lovely feature that people prefer to have in their homes.
- This may be accomplished by using miniature pool ladders or folding metal stairways, among other things.
- After a long day of trekking that has left you feeling particularly exhausted and worn, you’ll appreciate the fact that your tent is only a handful of little steps away.
- The movable tent platform for a trailer is equipped with hinges that allow you to access the area beneath it, but you can do much more with it.
- You may get creative with other ways to gain access to the space beneath your platform if you choose.
Attachment points for baskets and other add-ons, as well as hooks for displaying items, are all options.
As your DIY carpentry and construction abilities improve, you will notice an increase in the number of options for creativity and originality.
There are a variety of battery-powered outdoor lighting choices that you may incorporate into the platform.
Beyond simply being aesthetically pleasing, this also serves as a valuable source of illumination when camping, making the platform and tent more visible at night.
With the addition of carpets, stairs, additional holding places, and lights, the movable tent platform transforms your tent into a true home-away-from-home experience for guests.
You now have yourself a camping front porch. Alternatively, a gas-powered or do-it-yourself camping stove, as well as a cooler, may be used to create an outdoor kitchen. An advantage that may be capitalized on time and time again is the availability of a movable tent platform.
With a few basic carpentry skills and a little imagination, you can construct a portable tent platform that is both sturdy and functional. Camping will become a far more relaxing experience as a result of the platform. With only a few inches of wood and a few hours of construction work, you will be able to get away from tough terrain, flooded campsites, pests, and animals. You will be able to take full advantage of the wonderful outdoors. A tent platform, such as this one, may also be a really wonderful way for less experienced campers, elderly campers, and very young campers to enjoy camping without having to rough it as much as they would otherwise.
Even if you don’t have one, you can still construct an excellent tent platform.
Do you have any suggestions about how to make it more helpful and comfortable for yourself?
Regardless of the platform you create, make it yours.
Build the deck, Pitch the tent
The tent has finally been erected. It was simple to put together and appears to be rather roomy on the inside. The deck was constructed earlier this week by a family friend of my father’s. It was constructed on a 16x16ft platform. The groundsheet of the tent is 16.4 feet in diameter across the length of it. Because of this, it’s somewhat too small. Looking at it today, we believe that an 18x18ft platform would be the most appropriate size for a 16.4ft bell tent. Pitching the tent was a reasonably simple process.
- You start by laying out the tent and determining where you want the door to be located.
- This way, I have a designated area where I may remove my shoes before entering.
- An A-Frame type pole greets visitors at the entryway.
- When the entrance is opened, the overhang of material on each side of the tent and the slope should aid to keep rain from entering the tent as well.
- It was only a matter of attaching the “screen door” that remained.
- It appears that the entrance hole for the electricity is located at the bottom of the tent, rather than at the top, as I had previously assumed.
- The front door has a zip closure for easy access.
- It appears that the massive opening for the electrical lines is sufficient to compromise flood proofing.
I’ll soon be living rent-free in a main house that I’ll be able to enter whenever I need to – cigarette smoke and all. It’s a short-term option to be closer to family while still accumulating funds. The 31st of December is the last official day of business at my downtown Houston site.
Platform and Deck Tent – FREE SHIPPING
- SHIPPING IS COMPLIMENTARY. A canvas platform tent is sometimes referred to as a deck tent or an off-the-ground tent in some circles. It is most common to utilize an off-the-ground tent if you are planning on putting it in a permanent site. Canvas platform tents and deck tents are essentially the same type of tents that are often seen at Glamping resorts, with the exception of their size. For more information, including prices and photographs, visit glamping tents. Many further examples can be found by clicking campingplatform tent photos, which may assist you in deciding how you want to construct your platform. Tents that are elevated above the ground give a significantly better camping experience. Because you are not on the ground, you will have less mice and snakes to contend with. Additionally, the ground beneath your tent will be level. Additionally, it is easy to channel water away from the tent while it is raining. This decreases the probability of water getting on or under your floor. RECOMMENDATIONS:If you intend to set up your tent on a deck platform, the following are some suggestions: Construction of the platform: Do not begin construction of the camping tent platform until you have received and measured the canvas tent. Tent sizes vary widely, with most canvas tents being either smaller or bigger than the tent’s claimed measurements. Platform Dimensions: Construct the platform to be the same width as the framework. Rainwater runs down the roof over the eaves in this manner, preventing the majority of the water from puddling on the platform and entering the tent. Also, make sure that the deck tent structure is flush with the rear of the platform in order to prevent rainwater from entering from behind. Rainwater gap in platform: If you have a porch area and are using plywood, cut a 1/2-inch space in the middle of the platform “The plywood immediately in front of the deck tent has a gap in it. Rain water will not be able to enter via this opening from the front. Make sure the 2x6s for the porch run parallel to the front of the tent and allow for a 1/2 inch gap between the 2x6s “a space between the boards directly in front of you
- When using frame leg anchors, it is recommended that you use them in order to prevent your frame legs from rolling off the edges of your platform under high-wind conditions. These anchors are screwed into the platform floor and provide extremely sturdy support for your deck tent frame. Leg anchors may be viewed by selectinganchors from the drop-down menu. It is recommended that each tent frame leg be equipped with an anchor. Sod cloth is applied to the inside of the tent on top of the platform. If you do not want the sod cloth to be seen, place it on the inside of the platform on top of the platform. Wind and rain will be kept out by screwing it down with 2x4s. Keep in mind that there will be gaps at the corners due to the fact that sod cloths are cut at each corner. If you like, you can stain the 2x4s. If you want to make your tent wet and bug resistant, you may hang the sod cloth along the edges of the platform and then screw in a 1″ x 4″ board to the platform sides
- However, this is not recommended. Guy’s roping: Installation of eyebolts towards the bottom of the platform, right below the eave D rings or grommets on the sides and rear will be necessary. Attach your man ropes to the eyebolts with a knot. It is preferable to keep the ropes out of your way rather than having them at a 45o angle from the eaves, as described in this approach. If you use this approach, you must have your platform well secured to the ground, or else you risk having your platform and tent snatched up by high winds and blown away. A fly is highly recommended for canvas tents on platforms since they are typically left up for extended periods of time, and a fly is required. The use of a fly will considerably extend the life of your camping tent. It protects the tent roof from damaging UV rays, acts as an additional moisture barrier, stops any stove sparks from burning a tiny hole in your tent roof, and keeps your tent roof clean by removing tree sap and other debris from the tent roof
- Enlarged fly: Some individuals utilize an oversized fly to create a covered sitting space for themselves. Fly-hitching rail (also known as a fly-hitching rail): 4″ higher than the eave and 18″ out from the eave will provide for regular fly overhang on each side of the roof on each side of the roof. Tie the fly ropes over the top of the hitching rail so that they are visible. The hitching rail, which is used to hook your fly ropes to the eave, must be parallel to the eave. The use of this hitching rail will eliminate the need for fly ropes around your tent. Those are the four “A higher hitching rail provides for a space between the tent and the fly, allowing for better air circulation and the drying off of any moisture that may have accumulated on the canvas roof. However, if you anticipate severe winds, do not leave a space between the fly and the tent, since high gusts will demolish the fly and cause it to collapse. Finish by attaching the fly ropes to the hitching rail starting at the bottom, which will close any gaps. Floor:RECOMMENDED, A loose waterproof floor is preferred for off-the-ground tents because it permits the use of a perimeter sill board to tie the sod cloth to the side of your platform, which is more secure than a tight waterproof floor. Rain or snow may find their way inside your canvas tent, making the waterproof floor an absolute must-have if there is any chance of it happening. Whether water is present on your platform or rain may be blown into the tent through the walls, especially at the corners where the sod fabric is broken, water will accumulate in the tent and cause it to flood. You don’t want water getting into your tent, especially if it has carpeting inside. Because you have to remove everything off your floor, dry the carpet, and then reassemble everything in your tent, having a wet carpet is a complete catastrophe. Platform tents are suitable for use with indoor/outdoor carpeting as a floor covering. Having an efficient rain perimeter sill board and a rain gap at the front of your canvas tent can help to keep it dry during rainstorms. When compared to vinyl or wood flooring, carpeting is far more comfortable to walk on. A fireproof material must be placed under your stove and around it by at least 2 feet on all sides. Carpets are extremely combustible, and considerable caution should be exercised when working with them. Always utilize some form of nonflammable material under your stove, preferably one that is 18 inches thick or more “to the front of the line You should only use a carpet at your own risk. Snow accumulations: Some people like to leave their tents up during the winter months. There is no interior frame that can endure the weight of a large amount of snow. Because of heavy snowstorms, I’ve heard of outfitters who were forced to abandon tents in the backcountry over the winter because they needed to get back to the road base camps before the horse trails became impassable. I’ve also heard of outfitters who were forced to abandon tents in the backcountry because they had to leave quickly with their clients in order to make it back before the horse trails became impassable. When the outfitters returned their stuff the next spring, their tents and frames had been ripped to shreds and the frames had been ruined. For those who choose to leave tents up in the winter, I strongly advise using rafters every 2 feet to keep them from blowing away. The fact that your house has rafters every 2 feet to sustain snow loads should be mentioned. In the case of an off-the-ground tent, wood frame versus steel frame is preferred. Some clients create a wooden frame. Wood frames are far more difficult to construct than frames constructed from an angle kit and steel pipe. Using an angle kit, you can construct a steel frame in as little as 1-2 hours. The wood frame takes substantially longer to construct and is significantly more complex to construct. Moreover, it is quite difficult and time-consuming to separate wood rafters, wood ridgetent lengths, and wood legs and then use a saw to make modifications before reassembling your frame with nails or screws if your canvas shrinks more than you anticipated. If you are using 2x4s or 2x6s, you must round the jagged edges to prevent fraying of your canvas when it billows in the wind
- Otherwise, your canvas will tear. Frame made of steel: If you need to make alterations to a steel frame, the frame can be disassembled relatively quickly and easily. No tools are necessary to install or disassemble the steel frame, which is slip joint constructed. If you have any concerns about a camping platform tent or a deck tent, please do not hesitate to contact us.
Set Up a Tent on Your Own Land
Camping on privately held property is another option for staying entirely legal, as well as being inexpensive and distinctive. Making a home in your garden is an inexpensive method of living that is also a fantastic way to save money. A tent as a home is an excellent option if you have your own property and do not want to spend money on building a house. It allows you to live comfortably without having to spend a lot of money and without being too close to the outside world. People who have a very simple concept of dwelling can benefit from this form of camping.
- With your tent, you have the ability to be quite adaptable.
- You may create a deck to provide a more firm platform that is not impacted by the dampness of the surrounding environment for further comfort.
- Camping on your own property is a viable alternative mode of transportation.
- You can simply convert your camping tent into a house, allowing you to spend more time in the great outdoors.
For the Weekends
For those who have land where they can get away and relax on the weekends, they can set up a tent and save the money to construct a house.
Custom Tents: Denver Tent Company
For those who have land where they can get away and relax on the weekends, they can set up a tent and save the money to construct a home.
Safari Wall Tent Vs Bell Tent – 3 Question to Ask Yourself When Choosing a Tent
Making the investment of purchasing a canvas tent is a wise decision, and if you buy the proper one, it may last a lifetime. This is why canvas tents are sometimes referred to as “The Heirloom Tent.” Consequently, where do you begin while determining whichcanvastent to purchase? A wall tent (also known as a Safari tent) or a bell tent are usually the first things that people pick on when they are planning their camping trip (sometimes referred to as a teepee or yurt, though technically these are different structures).
However, there is more to owning a canvas tent than simply liking the way it looks, which is why we’ve compiled the top three questions to ask yourself when deciding which canvas tent to purchase.
QUESTION 1: What will you be using the tent for?
Is this a recreational camping tent, or something else? Will you be using it for a lengthy period of time, such as for a Glamping Airbnb or for long-term residence? Do you want to purchase a hunting tent? While both of these tents have plenty of headroom, the 5M bell tents have a 10 foot center pole and the Safari tents are 8 feet tall, so even your tallest camping companions will be able to stand up comfortably in either of these tents. The square footage of each tent, on the other hand, varies substantially, and this will have an impact on how many people can sleep in a tent.
- The 5M Bell Tent is 16 feet in diameter and has an interior floor area of almost 200 square feet!
- The safari tent is smaller (10′ × 12′) and may accommodate one queen bed, up to three twin beds (two twin beds are most comfortable), or three cots (depending on the size of the tent).
- The following are some of the most popular applications for the Safari Tent: VIP cabanas, expo booths, restaurants, massage suites, bathrooms, and hookah lounges are all options for the safari tents, which may provide both open airiness and seclusion depending on the configuration.
- When selecting a canvas tent, the second factor to consider is the location where the tent will be set up the most regularly.
- During the Wild Gypsy Tour for the Sturgis Motorcycle Rally in South Dakota last year, we deployed both safari and bell tents to accommodate the large number of participants.
- When compared to the majority of other tents in surrounding sites, both Stout Tents, the Safari Tent and the Bell Tents, fared admirably, especially the Safari Tent.
- Despite the fact that the safari tent did not blow away, some of the poles were bent and had to be replaced before it could be put back together.
The bell tent’s performance in windy conditions is unrivaled due to its conical shape.
Instead of taking our word for it, check out this video review from a customer who had the unexpected pleasure of testing out our Sunforger model during a huge storm!
We’re talking about the specific location where you intend to set up your tent.
Is it better to have hard compacted desert or loose sand in the dunes or on the beach?
This is a crucial question to ask yourself because the amount of time it takes to put up each tent varies.
The following are the usual setup instructions for each tent.
When it comes to ensuring that a bell tent performs as intended, it requires 24 stakes to be driven into the ground.
As previously said, there are possibilities for a stakeless arrangement; you can find out more about them here.
In the event of windy circumstances, we recommend that you anchor your safari tent; nevertheless, this is not essential for the setup to be successful.
As a result, safari tents have no constraints on where they may be put, making them a popular choice for usage inside buildings, on pool decks, tennis courts, parking lots, and any other surface where using pegs in the ground would be impractical.
QUESTION 3: How do you plan to travel with the tent?
If so, is it a backpacking tent for fun in the woods? What will you be doing with it in the long run? Will you be utilizing it for a Glamping Airbnb or for long-term living? Do you wish to buy a hunting tent for your next hunting expedition? While both of these tents have plenty of headroom, the 5M bell tents have a 10 foot center pole and the Safari tents are 8 feet tall, so even your tallest camping companions will be able to stand up comfortably in any of these structures. Each tent has a different amount of square footage, which will have an impact on how many people can fit in a given tent at any one time.
- The 5M Bell Tent has a 16-foot circle and can accommodate approximately 200 square feet of room inside if necessary.
- The safari tent is smaller (10′ × 12′) and may accommodate one queen bed, up to three twin beds (two twin beds are most comfortable), or three cots (depending on the size of the tent you choose).
- There have been many inventive ways to use both tents.
- WHERE DO YOU INTEND TO USE THE TENTITUDE?
- What we’re looking for is a general understanding of the regular weather conditions and the type of ground you may anticipate to be on.
- When a storm came through camp with gusts exceeding 50 miles per hour, our canvas tents were put to the test.
- In the heavy winds, the bell tent, on the other hand, was plainly better.
In spite of the storm, the Stout Bell Tents managed to hold their ground with astonishing tenacity.
This type of storm has been shown to be particularly resilient in the Arizona monsoons, Colorado thunderstorms, and the Hawaiian winter downpours.
Check out this video review from a client who was unexpectedly given the opportunity to test out our Sunforger model during a severe storm!
In this case, we’re referring to the specific location where you want to set up your camp.
Which is better: hard compacted desert or loose sand on the dunes or on the shore?
When it comes to tent setup, this is a vital question to ask yourself because each tent has its own set of requirements.
Traditional setup instructions for each tent are included below.
24 stakes are required for a bell tent to function properly and remain firmly planted in the ground.
For a stakeless arrangement, as previously noted, there are several choices available; please enquire here.
In the event of windy circumstances, we recommend that you anchor your safari tent; nevertheless, this is not essential for the setup to be completed successfully.
Given these safari tents are not restricted to certain locations, they are a popular choice for usage inside buildings, on pool decks, tennis courts, parking lots and other surfaces where using pegs in the ground would be impractical due to their lightweight design.
WHICH TENT WILL YOU CHOOSE?
Whether you’re planning a camping trip with friends, setting up a booth at an expo, or establishing a new glamping side business, you can rest certain that you’ll get the greatest quality from Stout Tent. All you have to do now is choose the model that best suits your needs and budget.