How Many Pints In A 2X2 Grow Tent

Stairway to Best 2×2 Grow Tent Yield [0.625+ lbs]

Home»Harvesting»Stairway to the Best 2 2 Grow Tent Yield19560Views0 “Stairway to the Best 2 2 Grow Tent Yield” Indoor growers aren’t usually need to dedicate a whole room to their operations. In order to fulfill your production objectives, tents as tiny as 2×2 feet are sometimes sufficient. But, more importantly, where should this aim be located? We’re talking about what a 2×2 grow tent might produce that would put a grin on your face. The one-word answer is that -10oz or 0.625lbsis the best theoretical yield for a 22 yield.

Growing 0.6lbs in a 2×2 grow tent is entirely achievable if you have comprehensive understanding of and command over the aspects that determine production.

Whether you refer to it as a beginner’s guidebook for 22 grow or a 22 yield master guide, it will walk you through the whole process of obtaining the highest possible yield from a modest grow tent.

Let’s take the next step-

Deciding Factors of a 2×2 Grow Tent Yield

There are several key aspects that influence the outcome of a 22 grow tent crop. It all comes down to these parameters, whether you want the highest output in a 44 grow tent or the best yield in a 22 grow tent. So, let’s have a look at the aspects that have a significant impact on the produce of your 2 2 tents:

  1. Plant Training Style
  2. Your Strain Type
  3. Light Type and Wattage

The yield from a 2×2 grow tent is also dependent on the height of the grow tent. The yield of a 2x2x4 grow tent will be significantly different from the yield of a two-by-two-by-five grow tent. However, the influence of grow tent height is not as significant as the impact of our key parameters. Let’s take these major deciding criteria one at a time and examine them.

2×2 Yield under Different Light Types

Let’s put aside all of the other considerations for a while. To make the discussion easier to understand, let’s focus just on the influence of lighting. We now have a rule of thumb for the amount of light wattage required for any particular grow space, thanks to a variety of different forms of study. The rule of thumb is that you should use 30 watts of light output for every square foot of space in your grow tent. As a result, around 120-140 watts of light power will be required for a 22 tent harvest.

So, let’s go to work on the math.

You may alternatively use two 120-watt lights to get the same effect.

So, allow yourself to be a little satisfied.

There is a larger tolight arrangement for the growing area. However, we are just concerned with light power and light type in this context. Let’s talk about the many sorts of lighting. In tiny grow tent harvesting, three types of lighting are most commonly employed. These are the ones:

There are three distinct levels of light output from each of these categories. Because of this, you will obtain varied outcomes in your 2 tent harvest if you use different combinations. Now, let’s figure out what kind of light is optimal for a 2×2 grow tent yield-

Yield under Fluorescent Lights

Some reason, fluorescent lights are quite popular among cultivators for whatever reason. Fluorescent lights are classified into two types: CFLs and T5s. CFL lights are utilized in the majority of the grow tents. When it comes to large venues, T5 lights are typically employed. Let’s discuss about the output of compact fluorescent lamps (CFLs). Light Emission: Compact fluorescent lights (CFLs) often produce 1500 lumens with only 30 watts of power. Yield Count: Several investigations have led to the development of a generic yield count under compact fluorescent lighting.

This means that under CFL lighting, your maximum yield in a 2×2 tent will be 55 grams (0.12 pounds.)

Yield under High-Intensity Discharge or HID Lights

HIDs are more energy efficient than fluorescents in terms of yield and lumen output. There are three different forms of HIDs. Metal Halide (MH), High-Pressure Sodium (HPS), and Ceramic Metal Halide are the three types of halides (CMH). You may use reflectors or hoods in combination to get the most out of the available light energy. However, there are certain disadvantages to using this strategy. The addition of reflector hoods increases the amount of heat produced. It is necessary to construct an airflow control system in order to reduce this.

Emission of visible light: For every 30 watts of power consumed by HID lights, around 1250 lumens are produced.

So, for our 220 watts, that’s 220 grams (0.49 pounds), or 220 mg per watt.

This will increase the number of yields you have to the maximum.

Yield Under LED Lights

Growers on a tight budget may find LED lights to be a godsend. These lights produce a large amount of light at a cheap cost in terms of electricity consumption. And the greatest part about these lights? They’re completely free. These are far more comfortable than other lights. It is not necessary to add a considerable amount of water into the heat control system. Many people have recommended employing a combination of LED lights and high-pressure sodium lamps. The widespread consensus is that using an LED+HPS combination will result in more sticky buds.

– Emission of visible light: LED lights may provide 1250 to 2000 lumens while only consuming 13-20 watts.

Count the number of yields: LEDs produce a somewhat lower yield than high-pressure sodium lighting.

As a result, if you put a 220-watt LED in your 220 grow box, you’ll obtain a yield of 110 grams.

In another arrangement, the yield will be 0.24 pounds per 2 grow box in a 2 grow box system. Given the cheap cost of LED lights, this would be a really impressive output. However, in order to do this, you must first get some high-quality 2×2 grow tent led lights.

2×2 Yield under Different Plant Training Styles

Do you believe that the density of your plants has an influence on your total yield? Let’s get things straightened up. Plant suffocation and other difficulties might occur when there is a high density of plants. Low plant density, on the other hand, indicates inefficient use of available space. Then there are issues relating to the scale of the plant. Larger plants can occasionally obstruct the access of smaller plants to air and light. It is essential that you fully comprehend the plant size guidance for a 2×2 grow tent in order to avoid any type of plant size-related issues.

So, how would you describe your evolving style?

We have created a plant density recommendation that is appropriate for each growth type.

  1. If you want to experiment with SOG, you may grow anywhere from 4 to 16 plants per square meter. As a result, you may cultivate 5-6 plants in this manner in your 22-foot grow tent. If you’re not interested in pruning, you can only grow one plant in your grow tent
  2. Otherwise, you can grow up to three. If you’re thinking about low-stress training, you can cultivate four plants every square meter of space available. If you have a 22-foot grow tent, that’s one plant. If you’re aiming for ScrOG, one plant will cover a 2×2 grow tent
  3. If you’re going for ScrOG, two plants will cover a 4×4 grow tent.

How much can I expect to generate in a 2×2 grow tent for each type, I’m sure you’re wondering. In order to respond to your query, we must first determine what you consider to be the highest yield. Do you want to get the highest possible overall yield? If you answered yes, then ScrOG is for you. Give it some time, and it will provide you with the maximum yield. Do you want to get the most out of each plant? If this is the case, try ScrOG once again. A single plant can produce more than 16 clones when using this technique.

  • If you answered yes, then go for SOG.
  • As a result, your canopy will fill up much more quickly.
  • If the answer is affirmative, then a 2 2 SOG yield will suffice.
  • If you are choosing on the type of your 2×2 grow tent setup, we believe this explanation will be beneficial to you.

2×2 Yield for Different Strains

Another important factor is deciding your grow tent production is the strain you use. It is possible to increase your yield count to a whole new level by using the appropriate strains. In addition to yield count, strain types significantly influence the overall quality of the plant. An example can help you better understand the influence of strains: in the case of spinach growth, it takes 29 days for Kolibri spinaches to achieve maturity. Carmel spinaches, on the other hand, require 25 days to mature from seed to harvest.

In the same way, every grow plant develops differently according on the strain it is grown from.

You will notice a significant increase in the amount of produce you produce.

Measuring Yield

A large number of people are unaware of the proper method of measuring yield. The fact of the matter is that the real yield weight is the weight of dried buds. Buds often absorb a significant amount of water as a result of the plant’s respiration mechanism.

Following the collection of buds, the buds are dried out using a time-consuming drying process. Regardless of the strain, wet buds lose around 70 percent to 75 percent of their weight after drying, depending on the temperature. All of the yield metrics are provided for dried buds in this section.

Extra Tips to Max out your 2×2 Grow Tent Yield

We’ve compiled some helpful hints for you that you could find useful when you’re building your business. These are the final cards you have on the table in terms of increasing your yield count to the maximum. So, let’s have a look at these-

Try to Avoid Soil

Hydroponics is increasingly considered to be the genuine deal. We prefer hydroponics to soil gardening because it is more environmentally friendly. And we have some compelling arguments in support of our choice. These are the ones:

  1. In contrast to soil, you have more control over the amount of nutrients used in hydroponics. It is quite simple to alter the pH and TDS of soil.

Use the ScrOG Method

Do you have any idea how much more you may grow by employing the ScrOG technique? You will be amazed to observe a yield increase of 10 percent to 20 percent as a result of utilizing this strategy. Here is a brief overview of the procedure:

  1. Trim the tips of your plant’s leaves
  2. Install a screen 12″-15″ above the existing ones. Once your plants have grown 4″ through the screen, you may tie them to the screen.

Eventually, a pleasing ‘blanket’ of tops will be laid out in front of you. Aside from the visually appealing appearance, you’ll also benefit from several additional features, such as-

  • There is almost no wasted light
  • There are almost no soft or fluffy buds.

As a result, the ScrOG approach will produce a higher yield.

Control Air and Temperature

Even after taking care of the most important variables, some gardeners are unable to produce a spectacular harvest. What is the explanation behind this? They experience a considerable reduction in yield due to a lack of interest in ventilation and temperature management. You could be wondering what you should do with this weather and air temperature. First and foremost, you must make certain that your grow tent has adequate ventilation. This will need the use of the finest fan for a 2×2 grow tent.

  • These are used to regulate the flow of air.
  • It is no longer possible to protect your plants from mold by providing adequate ventilation.
  • All of these configurations may be implemented in virtually all grow tents.
  • So make sure that the ventilation and temperature in your grow tent are consistent.


The following question: What is the most yield I can expect from a 2×2 grow tent? Ans:With the appropriate combination of HID and LED lights, you may achieve a weight of up to 0.5 pounds (227 grams) of growth. The question is, is it feasible to fit eight plants into my 22-foot grow tent? Ans:No. You can fit a maximum of 6 plants in your 2×2 tent if you use the SOG method. What is the minimum height requirement for a grow tent? The answer is 6.5 feet. The majority of growers recommend that a grow tent be set at this height.

Bottom Line

It’s been a long and winding road. We’ve covered practically all of the topics that you should think about if you want a high return on your investment. From the most important considerations to the supplementary suggestions, everything will be beneficial to you along the voyage.

When you extract a large harvest from your 2×2 tent, give yourself a pat on the back for all of your hard work. Believe us when we say that we understand the fervor. Wishing you the best of luck and growing with passion.

Hello, my name is John and I’m here! When I’m not busy working on my own company, you can find me wandering around my indoor plants, playing Call of Duty with my wife and kids, or hanging out with my friends and colleagues. John Terry’s most recent posts are shown below. (See all of them)

How Many Plants Can I Fit in a X by X Grow Tent?

If you’ve been looking into this subject for a time, you’ve most likely come across 10 different solutions for each tent size you’re considering. There is a valid explanation for this. Cannabis plants can grow to be enormous in size, depending on the strain, the size of the pot, the growth method, and other factors. The good news is that you have complete control over all of this, and as a result, you have complete control over the growth of your plants. The primary technique by which you do this is through the developing approach you employ.

In case you’re unfamiliar with any of the methods covered, we’ll provide a brief overview of each one, along with the advantages and disadvantages of each one.

How Many Plants Can I Fit In A 2 x 2 Grow Tent?

In a 2 by 2 tent, the majority of individuals will grow a single plant. Use strategies like as low stress training andlollipopping or other sorts of trimming to ensure that your plant fills out the area with the greatest amount of colas possible in a 3 gallon or 5 gallon container. The Sea of Green technique (abbreviated SOG) is another option for growing a high number of tiny plants in a limited amount of space. You will be able to fit four, or possibly more, plants into this area if you do this.

While I understand that there are smaller grow tents available than a 2 by 2 foot space, this is the least size we want to explore for the sake of this article.

They are intended for specialized purposes like as sowing or cloning, with some of the somewhat bigger ones being intended for vegging.

See also:  How To Make A Tent Pole

How Many Plants Can You Fit In A 2 x 4 Grow Tent?

Considering that this tent is precisely twice the size of the previous one, you’re most likely imagining that you’ll be able to fit twice as many plants inside it, providing they’re all the same size. And you’re absolutely correct. Small plants may be accommodated in a 2 x 4 foot grow tent, and you can fit as many as eight of them in there. In a 2 by 4 foot space, you can obtain two plants if you let them grow to their “natural” size.

How Many Plants Fit In A 3 x 3 Grow Tent?

When you get to the 3 by 3 size, things start to become interesting. You find yourself with a plethora of possibilities. You could put four plants in this size tent, but you’d have to keep them on the tiny side in order to make them work. You could use the SOG approach to cram even more plants into the space available. You have the potential to grow nine or perhaps more. Alternatively, you may travel the opposite way. You could cultivate a single plant if you wanted to. It goes without saying that you must prevent it from growing too tall, as grow tents have a maximum height restriction.

To guarantee that the plant spreads broad and fills the tent with as many bud sites as possible without growing too tall, you would want to apply low stress training and/or other strategies.

How Many Plants Can I Fit In A 4 x 4 Grow Tent?

This is the most typical tent size for a home grow, probably because it is ideal for using a 1000 watt HID lamp or a similar LED grow light to illuminate the plant. It’s also small enough to fit comfortably in the majority of households. As with the 33%, there is a great deal of possibility for customization. With SOG, you may produce one enormous (meaning wide, but not extremely tall) plant, four “regular-sized” plants, or as many as 16 or more.

How Many Plants Can You Fit In A 5 x 5 Grow Tent?

For a 1000-watt equivalent grow light, a 55 grow tent is also an excellent choice. The finest LED fixtures have a five-by-five-foot footprint. In a 5 by 5 area, you can grow up to 25 plants using SOG techniques. If you like to let your plants develop to their full potential, one of these tents might accommodate four reasonably large marijuana plants. Some cultivate a single massive plant in a 55 container.

How Many Plants Fit In A 4 x 8 Grow Tent?

Because a 4 by 8 foot grow tent is precisely twice as large as a 4 by 4, you can fit twice as many plants inside as you can in a 4 by 4. The Spider Farmer 4000 has two 1000 watt equivalent lights, which allows you to effortlessly grow two giant plants, eight good-sized plants, or as many as 32 or more little plants in a sea of green growth.

How Many Plants Can I Fit In A 10 x 10 Grow Tent?

Last but not least, we have the enormous 10 by 10 foot tent. It has four times the floor space of a 5 by 5, which means you can grow four times the number of plants in it. You should, however, ensure that there is enough space in there for you to be able to access all of the plants comfortably. However, you may do this by just making them a little smaller. It is possible to cultivate 100 or more little plants (though you may wish to lower this number somewhat to allow yourself enough space to reach every plant), 25 good-sized marijuana plants, or four enormous cannabis plants in this manner.

What Size Plants Should You Grow?

The amount of marijuana plants that may be accommodated in any given tent size is totally dependent on the size of the plants. Moreover, it is something over which you have some control. Many little plants are preferred by certain growers, whereas few huge plants are preferred by others. There are pros and downsides to both growth strategies, depending on your perspective. Let’s take a closer look at each of them.

Many Small Plants (Sea Of Green)

Using the Sea of Green technique, you may grow a large number of plants in a short amount of space, allowing you to accommodate more plants in your grow area. The end product appears to be a sea of green. This is perhaps the quickest and most straightforward technique of growing, which explains why it is so often used. You begin blooming the plants as soon as possible in order to prevent them from growing into huge plants. A consequence of this is that each plant typically only has one bud location.

The buds, on the other hand, are much smaller than those on a bigger plant. However, because you go from vegetative to flowering so fast, it takes considerably less time to get from the beginning to the end of the harvest, allowing you to harvest more frequently if you grow all year.


  • More harvests each year are possible because of the shorter growing cycle. There is no (or very little) pruning or trimming required. Because it does not require much vertical space, it is cost effective. It does not need a lot of soil (or other media)


  • Colas are smaller than in other ways (but there are more harvests)
  • Some countries set restrictions on the number of plants that can be lawfully grown
  • Others do not. There are more plants to water and feed with nutrients.

One Huge Plant

The amount of time spent watering and feeding nutrients is reduced if you simply have a single plant to take care of. You will, however, have to put in a lot of stress training, pruning, and cutting to get the results you want. You’ll want to educate your plant to grow horizontally, rather than vertically, so that it spreads out more sideways than it does up. Allow it to grow vertically from there until it has spread out to the side sufficiently to fill the growing area available. As a consequence, you will have the greatest number of bud sites to fill your available space, which equals a larger yield.

  1. Depending on the size of the object, that is.
  2. You’ll want to trim and maybe lollipop your plant in order to guarantee that as many bud sites as possible are exposed to light and that the plant focuses all of its efforts to producing those bud sites and nothing else throughout the growing season.
  3. Once the branches begin to grow vertically, growers use a net or a trellis to hold them in place until they are ready to harvest.
  4. Furthermore, development behind the net is eliminated since it does not receive much light in the first place.


  • If the number of plants allowed is restricted by regulation, this is an excellent method of increasing yields. It takes far less work to water and feed a single plant. Larger buds, which are typically more powerful.


  • Because of the longer growing cycle, there are more harvests every year. Stress training, trimming, and pruning are all required. There is a greater requirement for vertical space, however this may be mitigated by utilizing a technology such as SCROG
  • More soil or other material is required, as well as larger pots.

Several Medium to Large Plants

Finally, you have the option of growing to whatever size in between. There truly isn’t a limit to what can be done here. If you’re searching for an average-sized marijuana plant, you can expect it to grow to be about 4 square feet in size, which corresponds to an area of approximately 2 by 2 feet. Ideally, you’ll want to maintain these plants in a 3 or 5 gallon pot and train them to a certain degree. A SCROG grow is a good choice for plants of this size since it maximizes production. Several times over-top the plants to increase the amount of colas while keeping the overall height under control.

At the end of the day, any one of these strategies can be effective, and the choice ultimately comes down to personal preference.

Other Things to Consider

In addition to what we’ve already discussed, make sure you have enough space in the tent to be able to access to every plant and water it or provide whatever other care may be required. When working in bigger tents, this is especially crucial because plants at the back may be difficult to reach. You’ll also want to make sure there’s adequate room for any equipment you might require. This might include grow lights, filters, fans, humidifiers to enhance relative humidity, dehumidifiers to decrease relative humidity, air conditioning or heating, among other things.

Just make sure that there is enough space in the tent for everything you need to bring with you.

This term refers to the sucking inward of the tent walls as a result of the negative pressure created by your ventilation system within the tent.

Keep in mind that tent suck should be taken into consideration while determining how many plants to place in the tent.

As an alternative, you may take steps to prevent tent suck, such as installing support beams to keep the canvas walls in place and prevent them from sucking inward. Alternatively, you might utilize an intake fan to counteract the force of the exhaust fan.

How Many Plants In A Grow Tent: Final Thoughts

The most important message from this is that it is difficult to provide a response to the issue of how many plants can be accommodated in a certain size grow tent. You would need to know the size of the plants before you could proceed. And that is something over which you, as a farmer, have complete command and responsibility. As a result, the first decision you will need to make will be how big you want your plants to grow. That information will allow you to determine how many of them you can put into your grow tent, or how large of a grow tent you will need to be capable of growing any number of plants in one area of your garden.

How many Autos can I fit in a 2×2 tent with SCRoG?

  1. Date of joining: January 11, 2013 Messages:33 Likes Received:12 Consequently, I purchased a 2×2 tent, one Solarflare 200W LED light, an SCRoG net, and a total of ten distinct autoflowering seed varieties. What is the maximum number of autoflowering plants that I can have in the tent? I want to make sure I don’t overload the space. And what should the pots’ dimensions be? Is it a huge one? What are the two mediums? 4 minis? Is that right? Thanks

Grassmann1Grass man, Weed FanOld School

  • Date of joining: October 8, 2003 The number of messages is 443, and the number of likes received is 332. The member joined on January 11, 2013. Messages:33Likes Received:12 Okay, I’m not sure whether two autoflowers will do the task in there because they are autoflowers and may not produce much growth, but I’ll take your advise and try it. Do you have any recommendations for a large pot? Which size do you believe will be the most appropriate? Thank you very much. Date of joining: January 29, 2013 Messages:200Likes Received:44 I’m also waiting for a response. My. The tent is 2.5×4 feet. I believe there are a maximum of two scrogs and three plants. However, eat fewer vegetables.

Old School

  • Auto’s have a very short veg time, up to 3 weeks, which makes them unsuitable for ScrOG growing. Joined:Jan 31, 2013Messages:16,502Likes Received:13,867auto’s have a very short veg time, up to 3 weeks, which makes them unsuitable for ScrOG growing. They simply don’t have enough time to properly complete a screen filling out form. It is preferable to simply let them to form naturally. Alternatively, LST if you’re short on height. If I were to use a 250w high-pressure system, I would have four plants in there, each in a 12″ pot “pot with a square shape They’ll get along quite well in there. Despite the fact that I have no idea how well your light will perform, I have no confidence in LEDs myself. If I were to use two 125-watt compact fluorescent lights, I would have nine plants, each in an 8-inch pot “pot with a square shape
  • Date of joining: January 11, 2013 Messages:33Likes Received:12 That’s what I was thinking as well, one plant per square foot, or four for my 2×2 tent, I suppose. However, I’m not sure if they’ll be too many for such a little location since I’m still unsure. Only one also appears to be an insufficient number, therefore two or three will be my choices. As previously stated, I have ten autoflowering strains, all of which are distinct from one another, so I may choose two sativas/big/long-veg strains and three indicas/small/short-veg strains. I’m concerned about my height, therefore I need a scrog or some dolt to maintain them at an appropriate level. In terms of performance, my LED is supposed to be comparable to a 250W high-pressure steam generator, but it only requires 180w and uses 5-watt leds, making it a good light rather than a regular DIY led light. I’ve seen videos of this light functioning quite well, which is why I decided to get it rather than a high-pressure sodium or compact fluorescent lamp. I’m hoping against hope that it works that well. When it comes to the 12″ pots, how many gallons do they typically hold on a regular basis? What are the numbers 2, 2.5, and 3? Thanks

Old School

Date of joining: January 31, 2013 Messages:16,502 Likes Received:13,867 Although an LED utilizing 180 watts will not compare to a 250 watt high pressure sodium lamp, which normally consumes more than 300 watts, as long as your canopy is completely filled and the height is consistent, you will achieve the greatest results for your illumination. I’m having trouble seeing the advantages of LEDs because, watt for watt utilized (not rated), they’re roughly on par with compact fluorescents, yet compact fluorescents are far less expensive and can fit significantly more into the same space.

In the event that you utilize LEDs, I would probably recommend 9 plants in each 8″ container.

Obviously, they produce less per plant, but since there are so many more plants, you end up with more buds every harvest.

  • Date of joining: January 29, 2013 The number of messages sent was 200, and the number of likes received was 44. Right now, I have two badweed plants vegging: Sour Deisel 2 and Super Lemon Haze, both of which are ready to begin vegging. With my first grow, I’m use the Blackdog Micro LED. I’m pleased with the results I’ve achieved thus far with the LED setup. Besides, the Electric Company has just put their brand-new meter that measures your use by the hour
  • Date of joining: January 11, 2013 There have been 33 messages, and 12 likes have been received. Do you have a tent set up? What is the size of your grow room? I’m leaning toward four plants in 8.5×8.5×7.5-inch pots and the SCRoG net for the time being. I’d want to gain more expertise before attempting to fit additional plants into such a limited space. Date of joining: September 9, 2011 Eighty messages were sent out, and twenty-four likes were received. Hello there, buddy. My experience with Autos and regs has been limited, and I’ve made the error of attempting to expand too much at once. What I’ve found with autos is that growing them from seed in the largest container you can find works best (mind are 16 to 20 litres). If you try to grow them in a smaller container, you’ll get a poor yield because the roots can’t grow large enough and become root bound, and it’s simply not worth the effort. I hope everything works out for you, though. Peace
  • Initiated on: January 11, 2013Messages: 33Likes Received: 12 So you believe that the 8.5×8.5×7.5-inch pots will be too small? How many automobiles, in your view and based on your previous experience, would you fit in a 2×2 tent? My appointment with the hydroshop is tomorrow, so I need to make a decision now. Date of joining: September 9, 2011 Messages:80Likes Received:24 In a 2 foot by 2 foot space with anything like 200w to 250w of light, assuming that all circumstances were ideal, I’d place no more than 2 plants and lst to maximize production, especially if they were autoflowering. It’s just my opinion, but I hope it’s useful, buddy. Peace
  • Date of joining: January 29, 2013 Messages:200Likes Recieved:44Veg cycle is looking fine
  • Now I just have to wait and see whether the Blackdog micro will blossom my plants.
See also:  How To Keep Spiders Away From Your Tent

NiCKh08215Registered User

  • Date of joining: December 4, 2008 Messages:117Likes Received:15 Nonsense. Scrog is an excellent tool for use with automobiles. Look for “think different auto scrog” on the Google search engine. Dude had five plants behind a 5×5 scrog net and ended up with about a pound of marijuana. Everything is dependent on genetics, container size, and all of the other regular growth-limiting variables. If you put two 8in plants under a 2×2 net in three gallon buckets (five gallon buckets may actually cause the autos to grow too large, overfilling your screen and leaving colas competing for light and airflow), you’d be fine
  • If you put two 8in plants under a 2×2 net in four gallon buckets (four gallon buckets may actually cause the autos to grow too large, overfilling your screen and leaving colas competing for light and air Date of joining: September 9, 2011 Messages:80Likes Received:24
  • I’d say 2 for your maximum yield if I were you. One is growing in a 2x2x4 tent that I have. I have a 30 gallon air pot that almost completely fills the entire tent. I’m referring to the pot in the middle of the table with very little space around it. I don’t see much of a difference in utilizing this size pot
  • I could have used a 5 gallon container and had two plants growing at the same time. I have a 150w hps with a few of t5’s for lighting. thus to play devil’s advocate, I was also considering growing four plants in smaller pots for my next grow session. That way, I’ll be able to cram in some new strains and go through the rest of the wish list more quickly. However, it all depends on what you desire and whether or not yield is highly essential to you. It is possible to grow four plants using a scrog. For those that grow indica dominating strains, this is especially important:

Old School

  • Date of joining: January 31, 2013 Messages:16,502Likes Received:13,867 No, this isn’t gibberish at all
  • It makes perfect sense. I’m speaking from my experience, having grown automobiles for eight years. Take a look at the lighting he’s employing here. A larger light source would have altered the situation. My suggestions were applicable to his particular situation. read thru the entire topic

NiCKh08215Registered User

  • Date of joining: December 4, 2008 Messages:117 Likes Received:15 Ahhh. LEDs. Honestly, I don’t know anything about them, so you scored a gold star for me. While it is possible to successfully grow a pair of plants under any light conditions desired, excellent results are not guaranteed. Can you tell me how many lumens a 200w LED produces? Considering that my 150watt hos is only 16,000 lumens, and that’s hardly enough for two plants, you’re absolutely correct that if he had any fewer than ten plants, one plant would be preferable to two

Old School

  1. Date of joining: January 31, 2013 Messages:16,502 Likes Received:13,867 The plants should be grown to accommodate the amount of light available. The larger the light, the larger the plants should be grown. The larger the plants, the fewer of them will be able to fit in the space. Due to the low amount of illumination provided by led, I recommend utilizing small pots with little plants but more of them. When using smaller lights, this typically results in a larger total yield. However, with larger lights, the plants are better able to grow larger and hence produce fewer of them.

How Many Cannabis Plants Can You Grow Per Square Metre? [Calculators Inside] – RQS Blog

Factors that influence the number of plants that can be grown on a square metre. It is essential that you have a strategy in place before you begin your indoor growing enterprise. One of the considerations you’ll want to make is how many cannabis plants you’ll be able to accommodate in your growing space.


In addition to your tent’s available area, the size of the pots you use, and the type of lighting you use, there are numerous more elements that determine the number of plants you can properly put into a square metre.


The first thing to think about is the sort of cannabis you’re growing—the genetics of the strain you’re using. Sativas grow tall and lean, but indicas are stocky and bushier in appearance. Autoflowers are known for their short growth, with some types reaching barely 50–60cm in height. When growing cannabis indoors, even people who do not have major space constraints are more likely to prefer shorter cannabis cultivars. As the person responsible for supplying illumination, you must take into consideration the amount of space taken up by your growlights and other equipment.

In order to prevent problems with spacing and illumination if you do not intend to train your plants, try growing the same sort of strain or two strains with very similar heights to avoid running into problems.

Of course, the smaller and more compact your plants are, the more you can cram into a given square metre of floor space. It is entirely up to you to determine whether you would want to harvest a large number of little autoflowers or simply one or two really powerful hybrids.


The dimensions of your growing space will have a significant impact on the number of plants you can grow per square metre, as well as on your overall yield. If you’re like the majority of home growers, you’ll most likely be utilizing a grow tent that has been put up in a convenient area in your house. Grow tents are available in a variety of sizes, ranging from modest 50 x 50cm tents to big tents that might take up half of your living space. Choosing the appropriate size for your grow relies on the strain(s) you’re growing, the size of your indoor growing area, and the style of grow you’re aiming for (heavy training, leaving plants to develop as is, etc.).

As you grow your collection of plants, you’ll need to scale up your operation.


Depending on the diameter of your pots, you can put many of them into a square metre of space. However, the size of your containers has an influence not only on the number of plants that can be accommodated per square metre, but also on the total size of the plants. To put it another way, the larger the pots you use, the larger the plants that grow in them. Pot sizes are recommended in the following proportions: 12 litres (one gallon): Seedlings and young plants up to 15cm in height are OK. Approximately 2–3 litres: Plants may grow to a maximum height of 25cm.

The following amounts are in litres: 11 litres or more Plants grow to an average height (check strain description) You can accommodate nine 11-litre pots per square metre of floor space for a typical indoor grow.

You’ll be wasting crucial floor space if you use spherical planting pots.

Plants per square meter of space


With planttraining techniques, you may minimize the number of cannabis plants to a bare minimum while yet maximizing their yield and quality. Each of these training strategies is intended to maximize space while also increasing yields.


4–16 plants per square metre are recommended. Outcomes: Fast yield, maintains plants short, is simple to conduct, and produces proportionally lesser yields per plant than other methods. When it comes to the sea of green approach (SOG), it is all about making the most of the area you have available. Photoperiod plants, clones, and autoflowers can all benefit from this method since it produces consistent results. This strategy is both time-efficient and profitable. After 1–2 weeks of vegetative development, plants are forced to blossom in a SOG, which reduces the amount of time they have to grow.

As a result of the lack of time available to the plants, the result is a large number of short plants with short primary colas.

5–12l containers can accommodate 4–16 plants per m2 under a 400W high-pressure sodium lamp. An optimum SOG grow may provide numerous 500g/m2 harvests each year from a single plot of land.


The average square metre has 2 large/5–10 tiny plants. Outcomes: Simple to implement, it maintains height under control, increases yield, and extends the growing period. Techniques like topping and fimming are used for high-stress training. Cutting off or pinching the primary growth tip of a plant causes the plant’s apical dominance to be broken, resulting in the development of numerous major colas instead of just one. The natural outcome of this is bushier growth, which eventually leads plants to stop growing in the shape of a Christmas tree.

If you’re pruning, topping, and/or fimming your plants, give them time to recuperate and count on a later harvest date as a result.


1 giant plant and 2–4 tiny plants per square metre of space Outcomes: It is difficult to achieve consistent results, but there are solutions for both novices and more skilled growers. Mainlining and lollipopping are two plant training strategies that are used to encourage the development of big buds at the ends of branching structures. Mainlining Mainlining consists of a combination of topping, LST, lollipopping, and ScrOG ingredients. Plants are topped at the third node, and all of the lower branches are removed from the plant.

This can drastically increase the amount of grow space required depending on the number of colas and the size of your pots, so bear in mind that you may be able to accommodate less mainlined plants per square metre of grow space.

In order to remove any extraneous development from the branches and the main stem, only the primary bud and side branches with large buds are left on the plant.


Plants per square metre: 2–4 large/4–6 medium plants per square metre Results: Suitable for autoflowers (no topping required), perfect for novices, and does not necessitate any significant recuperation time. LSTis a training strategy that is suitable for beginners. During vegetative development, you’re essentially just bending and tying down stems in order to force plants to grow horizontally instead of vertically. LST can be used with other approaches, such as ScrOG, to get greater results. It is frequently performed in conjunction with topping in order to disrupt apical dominance, although it may also be conducted on autoflowers without the use of topping.

A 1m2 space may be efficiently filled by between 2–4 plants trained with LST. Plants trained per square meter of SQMGrowspace (m2) Training with a Low Stress Level (LST)


1–2 huge plants and 4 medium-sized plants should be planted per square metre. Outcomes: Only for expert gardeners who want the highest output per square metre and the greatest flexibility in terms of how many plants they wish to employ. A single square metre of growing space is most effectively utilized with the AScrOGmethod. It is a grid-like mesh (chicken wire, netting, or other similar material) through which the branches of budding cannabis plants are woven to restrict the growth of the plant in this advanced training method.

A ScrOG simply exposes the major colas to light, allowing the plant’s energy to be directed on bud development.

This manner, you can acquire the most yield possible from the space you have available for growth.

Even while you may fill your area with a single enormous plant in a giant 20l pot, you could alternatively grow numerous smaller plants in smaller pots, such as four medium-sized plants in each of four 10l pots.


The kind and intensity of your grow lights are the last factors that decide how many plants you can put into each square metre of your growing space. Growing awareness of the fact that grow lights do not distribute light equally throughout the full growing area makes this even more apparent. The highest light intensity (and, hence, the fattest buds) is found directly beneath the lamp, and the light intensity drops substantially as it moves to the sides. Growing fewer plants may make more sense in this situation because you will almost certainly be compromising yield due to inadequate light dispersion if you squeeze in too many.

Growing marijuana under HID (high-intensity discharge) lights can be difficult, but using a simple calculation will help you determine the appropriate amount of plants for your situation.


  • In terms of plants, 150W HID =2 plants
  • 250W HID =3.3 or 4 plants
  • 400W HID =5.3 or 6 plants
  • 600W HID =8 plants
  • 1000W HID =13.3 or 14 plants

In terms of plants, 150W HID =2 plants; 250W HID =3.3 or 4 plants; 400W HID =5.3 or 6 plants; 600W HID =8 plants; 1000W HID =13.3 or 14 plants; 1000W HID =13.3 or 14 plants


Modern LEDs produce the same amount of power as high-pressure sodium lamps while consuming only 60% of the energy. They are able to cover the same amount of space while using less power. A decent 250W LED is equivalent to a 400W high-pressure sodium lamp, which may cover around 5–6 plants. When compared to this, a high-powered 1200W LED should be able to illuminate around 8–9 plants. Keep in mind, however, that wattage is only one factor to consider when calculating the power of your LEDs, as a variety of other variables—including the type of LED—have an impact on their overall efficacy as well as their efficiency.

The manufacturer should be consulted for the suggested number of plants to be grown and the ideal distance between your lights and your plants’ canopy when utilizing LEDs. This sort of information is often made available by reputable producers.

  • TIP: If you’re not sure how many plants you want to cultivate, it’s best to start off with fewer plants to be on the safe side. It will be preferable in the long run to have two giant, happy plants with fat buds rather than a tent full of little, light-deprived cannabis plants that will only produce micro buds. As an added bonus, saving money on seeds is a possibility
See also:  How To Stake A Tent

How Many Plants Can You Grow In A Grow Tent? [2×3 2×4 3×3 4×4 8×8 10×10]

TIP: If you’re not sure how many plants you want to cultivate, it’s best to start off with less plants to be on the conservative side. A tent full of little, light-deprived cannabis plants that will only produce micro buds will ultimately be preferable than two enormous, happy plants with fat buds. You’ll also save money on seeds as a result of this.

How to Choose the Right Size Grow Tent

If you’re anything like me, you’re more of an indoor gardener than a carpenter, then drilling holes in your walls and ceiling for light hanging and exhaust vents doesn’t make much sense. Consequently, if you’re desperate to start growing (like I was), a grow tent would be the perfect alternative for you: no drilling, no sizing needed; simply put up the tent and plug in the equipment. First and foremost, though, you’ll want to make certain that your growing space is properly measured before purchasing a grow tent.

  1. The shade provided by your garden’s canopy
  2. Grow lights (both in terms of their size and the distance between them and your plants)
  3. Carbon filter, intake/exhaust fans, clip fans are examples of ventilation equipment. A variety of accessories and instruments (such as reservoirs, pumps, soil, nutrients, shears, and so on)

As soon as you’ve determined your ideal growing space, you can begin shopping for a grow tent to fit your needs. Everything that is essential to your garden, including you, must fit comfortably in your grow tent, so let’s get started on finding out how we might accomplish this goal:

Part 1: Planning Out Your Grow

Before you begin constructing your ideal grow tent for your future harvests, you’ll want to sketch up a schematic of the growing area you anticipate you’ll want, as well as a list of the equipment you’ll need. It doesn’t have to be anything spectacular, but having a good picture to assist with the setup process is usually beneficial. Check to see that you have the following items: Also, be certain that you are aware of the amount of power required to operate your accommodation. A common residential breaker has 15 amps of capacity, and you should never use them to their maximum capacity.

  1. Check the circuit breaker for that room and make sure there are no inconvenient appliances connected to it.
  2. If you want additional amperage for your setup, you might consider acquiring a second 100 amp sub panel.
  3. Finally, before you begin putting up your equipment, make sure you understand what will be done with the water run-off (soil) or water used to replenish reservoirs in hydroponic systems after they have been set up.
  4. If your water is going to be delivered in a different room, take efforts to make the procedure of disposing of water waste and refilling water bottles as simple as possible.

Setting up a Grow Tent Area | Step by Step

Once you’ve decided on a site, assigned an electrical breaker, and planned out your watering procedure, you’re ready to go.

  • Create an inventory of the materials and prices for the equipment and accessories (using your blueprint as a guide)
  • Make sure anything in the room is out of the way that isn’t necessary for your grow space. This includes any furniture, curtains, pets, carpets, workstations, and other such items. Set up your hydroponics or soil system and decide the space between your pots or buckets, depending on your preference. To ensure adequate working space in and around them, make sure to provide for extra space. Nutrients, sparegrow light bulbs, pruning shears, and other accessories should be stored in a designated area. Plastic storage containers are my preferred method of storage. Locate a location in your growing area where you can install the grow tent. In the event that you intend on exhausting or drawing air from an outside source (or both), consider using a window or a crawl space from the roof. Make sure that your grow tent is close to the exhaust and intake sites
  • This is a crucial factor to consider when setting up your grow tent equipment.

What NOT to do in your Grow Area

It’s critical to understand what might cause damage to your grow space.

If you want to prevent having a headache throughout your growth season, you should avoid the following things at all costs:

  • Maintaining a soiled grow tent and growing environment. Anything that isn’t compostable or recyclable should be kept off the ground and away from your grow tent. Trash is a breeding ground for possible pests, which can then find a home in your grow tent and on your plants as a result. Prevent insect infestations by maintaining a clean and orderly environment
  • Avoid becoming disorganized by storing your equipment and accessories in a cluttered area. Cross contamination is a fairly prevalent problem, and if your used ducting comes into contact with the pruning shears that you use to snip off leaves, you might be introducing some harmful bacteria. Do not allow clutter and garbage to accumulate around you. Empty boxes should be removed, and your grow equipment should be designated to keep things organized and secure. Bringing outside equipment into your grow tent is a good idea. This includes ladders, hoses, garbage cans, and any other items that are kept outside. Keep it away from your growing space. Outside pests, like as spider mites, have an easier time getting inside your grow tent and munching on your plants as a result of your actions. Aphids are a frequent pest problem that may be exceedingly difficult to control and eliminate. Prevent yourself from making this mistake by keeping outdoor equipment where it belongs, outside.

Having determined how you want to utilize your area, the following step is to determine which grow tent will best assist you in moving on with the process of putting together the appropriate grow tent.

The Small Square Base (32x32x63)

This grow tent is fantastic, especially if you’re just getting started (whether you want to or for necessity). It provides more than enough ventilation choices and can support the growth of two mature plants that are around 4-5ft tall from the top of the grow container. It incorporates double-line zippers to ensure that no light escapes through, allowing you to sleep in perfect darkness while following your evening routine. According to the schematic above, this grow tent is comprised of the following components:

  • A total of 5x 6in. duct openings are available for intake and exhaust choices
  • For cable, pipe, and wire management, there are two 4in. duct ports. air exchange and humidity management are made simple with three sleek rectangular air vents. Pocket pouch for quick access to common accessories such as pruning shears, meter, or sunglasses
  • 1x pocket pouch for convenient access to common accessories such as a pen
  • The grow tent has one sealed window, which allows you to keep an eye on your plants without disrupting the environment. (3) ceiling supports for grow light systems, carbon filter attachments, and any other niceties that you’d like to dangle from the rafters

A double drawstring vent and duct holders are included with the 6″ ducting. The upper 6″ of the duct opening is often utilized for exhausting purposes. You may either attach a fan to the top of the grow tent or run ducting through it from a fan that is located within the tent. If you have an air-cooled hood and would want to run an additional exhaust fan, you may do so through the two 6″ duct openings at the top of the hood. Simply connect ducting to both sides of the air-cooled reflector and put a fan on the opposite side to complete the installation.

Although this is an older grow tent that we used to sell, the majority of its features are still applicable today.

Small Rectangular Base (48x24x60)

Because it is so thin, it is more easily accommodated in large closets (like ones with sliding doors). Growing space is 48 inches wide, 24 inches long, and 60 feet tall in this particular grow tent configuration. With this grow tent, we propose either three full-sized plants or eight tiny plants to be placed inside (clones, herbs, early vegging growth, etc.). The following items are included with this grow tent:

  • For intake and exhaust choices, there are three 6-inch duct openings. For cable, pipe, and wire management, there are two 4in. duct ports. air exchange and humidity management are made simple with three sleek rectangular air vents. Pocket pouch for quick access to common accessories such as pruning shears, meter, or sunglasses
  • 1x pocket pouch for convenient access to common accessories such as a pen
  • To keep an eye on your plants without upsetting the grow tent environment, 2x sealed windows are provided. 4x roof support beams for grow lights, carbon filters, and any items you’d like to hang from the roof
  • Front entry with two doors to accommodate the large size

I’ve personally used this grow tent for both moms and clones, and it’s a reliable complement to any growing environment. You have less customization options with a freestanding unit because it only comes with three 6in. duct ports, none of which are located at the bottom of the unit for improved air intake quality.

Medium Rectangular Base (48x48x78)

This grow tent is far larger than the two prior grow tents that we discussed. The dimensions of this grow tent are 4x4ft in length and 6.5ft in height. For this size grow tent, we recommend that you place four full-size plants in it, allowing you plenty of freedom to move about. You can also squeeze 6 in there, but it will be a tight fit. You may also accommodate 16 small-sized plants that will grow to be no more than 2 feet tall in this space. The following items are included with this grow tent:

  • A total of 5x 6in. duct openings are available for intake and exhaust choices
  • For cable, pipe, and wire management, there are two 4in. duct ports. air exchange and humidity management are made simple with three sleek rectangular air vents. Pocket pouch for quick access to common accessories such as pruning shears, meter, or sunglasses
  • 1x pocket pouch for convenient access to common accessories such as a pen
  • There are 1x sealed windows so you can keep an eye on your plants without upsetting the grow tent environment. 4x roof support beams for grow lights, carbon filters, and any items you’d like to hang from the roof
  • Two side entrances (on the left and right) let you to move around your grow tent with ease. It can also be used for optional entrances.

This is one of the most widely used grow tents in history. The size is ideal for medium-sized grow spaces, and there is lots of room for modification to help you make the most of your growing space. Because of its large size, this grow tent is quite popular.

It’s the perfect size, neither too little nor too large. This layout is enhanced by the presence of two side doors, which allow you to work on your plants without having to enter via the front entrance. You can see it in action in this promotional film for Yield Lab grow tents that we produced.

Large Rectangular Base (96x48x78)

As far as grow tents go, this is one of the most popular models available. A medium-sized grow area will benefit from the size, and there is plenty of room for modification to make the most of your growing area. Because of its size, this is a popular grow tent. Neither too little nor too large, it’s just the right size. This layout is enhanced by the presence of two side doors, which enable you to work on your plants without having to enter via the front entrance. Watch the following promotional film for Yield Lab grow tents to see it in action:

  • 4 x 8-inch duct apertures for more intake and exhaust flexibility
  • Intake and exhaust options are provided via two 6in. duct openings. 4-inch duct ports for cable, pipe, and wire management
  • 4-inch duct ports for cable, pipe, and wire management
  • A total of 6 streamlined rectangular air vents for simple air exchange and humidity regulation
  • Pocket pouch for quick access to common accessories such as pruning shears, meter, or sunglasses
  • 1x pocket pouch for convenient access to common accessories such as a pen
  • To keep an eye on your plants without upsetting the grow tent environment, 2x sealed windows are provided. 4x roof support beams for grow lights, carbon filters, and any items you’d like to hang from the roof
  • Two-door front entry to accommodate the large size
  • Two-door back entrance to provide for easy access to all of your plants.

The highest amount of personalization is available with this huge grow tent. You have many more duct ports, allowing for massive exhausting with 8-inch high-output fans and enormous carbon filters to be accomplished. Large open entrances make it easy to reach to all of your plants without a fuss. For professional growers, this is without a doubt one of the greatest grow tents available on the market. BONUS: This following video demonstrates all of the many design possibilities available for your grow tents.

You should learn to experiment and enjoy yourself while doing so because it is your grow room and you are the expert on what is best for your plants.

We hope that this article has assisted you in determining which grow tent is most suited for your growth requirements.

Please note that this item was initially published in January 2015 and has been updated to ensure accuracy and completeness of the information provided.

Leave a Comment

Your email address will not be published. Required fields are marked *